2020-01-29 19:38:08 ★ Marcus Wilburn pulls up in front of his garage in a rather loud E36 M3, he jumps out and slides his fingers
2020-01-29 19:38:18 ★ beneath the garage's door, raising it up.      ((Marcus Wilburn))
2020-01-29 19:38:41 ★ Marcus Wilburn jumps back in the car and drives inside the garage as he carefully gets it between the
2020-01-29 19:38:46 ★ two post lift.      ((Marcus Wilburn))
2020-01-29 19:39:27 ★ Marcus Wilburn gets out of the car and flashes a grin as he looks at it.
2020-01-29 23:09:18 ★ Marcus Wilburn drops on his knees and lines up the lift's arms beneath the BMW's pinch welds.
2020-01-29 23:09:59 ★ Marcus Wilburn pushes himself up and holds the button with an arrow pointing up to raise the car about
2020-01-29 23:10:11 ★ a foot above the floor.      ((Marcus Wilburn))
2020-01-29 23:10:35 ★ Marcus Wilburn rests his hand on the side of the car and slightly pushes on it to ensure it's steady.
2020-01-29 23:11:12 ★ Marcus Wilburn walks over to his trolley tool box and carts it closer to the vehicle before taking out
2020-01-29 23:11:44 ★ an impact wrench and fitting it with the wheel lugs socket.      ((Marcus Wilburn))
2020-01-29 23:12:33 ★ Marcus Wilburn heads to the driver side of the vehicle and takes a knee behind the front left wheel prior
2020-01-29 23:12:47 ★ to undoing the lug nuts with his impact wrench.      ((Marcus Wilburn))
2020-01-29 23:13:55 ★ Marcus Wilburn places the removed nuts on the ground and grabs the wheel with both hands as he
2020-01-29 23:13:59 ★ wiggles it out of place.      ((Marcus Wilburn))
2020-01-29 23:14:27 ★ Marcus Wilburn heads to the front right side of the car and kneels down in order to unscrew the wheel's
2020-01-29 23:14:31 ★ lug nuts.      ((Marcus Wilburn))
2020-01-29 23:15:03 ★ Marcus Wilburn pulls the wheel out of place as soon as he's done loosening the lug nuts, he places it
2020-01-29 23:15:05 ★ aside.      ((Marcus Wilburn))
2020-01-29 23:15:41 ★ Marcus Wilburn pushes himself up and sighs as he heads to the right rear side, he crouches down and
2020-01-29 23:16:07 ★ Marcus Wilburn uses the impact wrench to undo all five lug nuts, placing these aside.
2020-01-29 23:16:28 ★ Marcus Wilburn sets the impact wrench aside and jiggles the wheel out of its place, putting it down.
2020-01-29 23:16:40 * Marcus Wilburn's cellphone starts to ring. *
2020-01-29 23:16:47 ★ Marcus Wilburn makes his way to the last wheel, he takes the call.
2020-01-29 23:16:49 * Marcus Wilburn takes out his iPhone 8. *
2020-01-29 23:16:51 [English] You [Cellphone]: Alo?
2020-01-29 23:16:54 [English] ((Zeshaun Townes)) [Cellphone]: It's Kutt. Where you at?
2020-01-29 23:17:06 [English] You [Cellphone]: At the garage, working on my whip whassuh?
2020-01-29 23:17:23 [English] ((Zeshaun Townes)) [Cellphone]: Near duh beach or what? I'ma swing by rea quick.
2020-01-29 23:17:39 [English] You [Cellphone]: The garage where we had the bike stashed, rememba?
2020-01-29 23:17:49 [English] ((Zeshaun Townes)) [Cellphone]: Yeah, bro. I'ma be there in a bit.
2020-01-29 23:17:51 [English] You [Cellphone]: Behind RS Haul or whatever.
2020-01-29 23:17:54 [English] ((Zeshaun Townes)) [Cellphone]: Yeah, yeah.
2020-01-29 23:18:00 * Marcus Wilburn puts down his iPhone 8. *
2020-01-29 23:18:24 ★ Marcus Wilburn pockets his phone away and kneels down as he stares at the five lug nuts for a second.
2020-01-29 23:18:31  [English] Marcus Wilburn says: Well well, what do we got here.
2020-01-29 23:18:57 ★ Marcus Wilburn undoes them utilizing his impact wrench, he saves them in his pocket for later use and puts
2020-01-29 23:19:07 ★ the impact wrench on the floor.      ((Marcus Wilburn))
2020-01-29 23:19:21 ★ Marcus Wilburn proceeds to pull the loose wheel aside and put it down on the ground.
2020-01-29 23:24:44 ★ Marcus Wilburn looks around the garage for a moment, exhaling sharply as he takes a switch blade out
2020-01-29 23:25:00 ★ of his back pocket, he proceeds to open a carton box to reveal a set of four coilovers.      ((Marcus Wilburn))
2020-01-30 00:10:08 ★ Marcus Wilburn puts the switchblade back inside his pocket after concealing the blade, he starts
2020-01-30 00:10:25 ★ taking out the coilovers along with the mounting accessories that came with the kit.      ((Marcus Wilburn))
2020-01-30 00:10:45 ★ Marcus Wilburn empties the box and grabs the mounting bolts along with a front coilover and the
2020-01-30 00:11:28 ★ top mounts.      ((Marcus Wilburn))
2020-01-30 00:13:39 ★ Marcus Wilburn sets them down near the front left side of the car and opens the driver door as hee
2020-01-30 00:13:54 ★ steers the wheel all the way to the right to reveal the two brake caliper bolts.      ((Marcus Wilburn))
2020-01-30 00:14:13 ★ Marcus Wilburn grabs a breaker bar and fits it with a 14mm before using it to break loose the two brake
2020-01-30 00:14:17 ★ caliper bolts.      ((Marcus Wilburn))
2020-01-30 00:14:42 ★ Marcus Wilburn slides a bucket there and places it upside down using it to support the brake caliper once
2020-01-30 00:14:45 ★ it's loose.      ((Marcus Wilburn))
2020-01-30 00:15:29 ★ Marcus Wilburn pulls the brake rotor out and places it aside.
2020-01-30 00:16:22 ★ Marcus Wilburn fits his ratchet with a 12mm socket and removes the top nut on the sway bar end link.
2020-01-30 00:16:31 ★ Marcus Wilburn places the nut aside along with the ratchet.
2020-01-30 00:17:06 ★ Marcus Wilburn removes the bushing as well, placing it next to the nut to identify it later on.
2020-01-30 00:18:45 ★ Marcus Wilburn slides a hydraulic jack beneath the control arm and pumps up the lever until the jack is
2020-01-30 00:18:52 ★ slightly supporting the control arm.      ((Marcus Wilburn))
2020-01-30 00:20:23 ★ Marcus Wilburn takes his ratchet fits it with a 15mm socket before grabbing a 15mm spanner.
2020-01-30 00:20:30 You repaired Zeshaun Townes's vehicle.
2020-01-30 00:21:17 ★ Marcus Wilburn uses the spanner to fix the top nut securing the strut to the knuckle, he uses the ratchet
2020-01-30 00:21:22 ★ to undo the bolt.      ((Marcus Wilburn))
2020-01-30 00:21:43 ★ Marcus Wilburn does the same thing with the bottom nut and bolt, he separates the knuckle from the strut
2020-01-30 00:21:48 ★ once done with the two bolts.      ((Marcus Wilburn))
2020-01-30 00:22:34 ★ Marcus Wilburn grabs a flathead screwdriver and a 15mm spanner, he opens the driver door and pulls
2020-01-30 00:22:44 ★ the hood release handle to pop the hood open.      ((Marcus Wilburn))
2020-01-30 00:23:07 ★ Marcus Wilburn then raises the hood up and supports it with the hood prop, he proceeds to stick the
2020-01-30 00:23:27 ★ screwdriver in the slot on top of the strut shaft to prevent it from turning while using      ((Marcus Wilburn))
2020-01-30 00:23:38 ★ the 15mm spanner to undo the nut on top of the strut.      ((Marcus Wilburn))
2020-01-30 00:24:11 ★ Marcus Wilburn puts the tools back in the tool box and kneels down as he eases the strut out of
2020-01-30 00:24:15 ★ place, putting it away.      ((Marcus Wilburn))
2020-01-30 00:25:14 ★ Marcus Wilburn grabs his electric battery operated drill and fits it with the right size bit before
2020-01-30 00:26:02 ★ getting to the hood and drilling the two rivets on each of the stock strut mounts.      ((Marcus Wilburn))
2020-01-30 00:26:21 ★ Marcus Wilburn turns off the drill once he's done drilling the rivets, he places it aside and grabs a
2020-01-30 00:26:46 ★ ratchet, fitting it with a 15mm socket and using it to undo the three bolts on each      ((Marcus Wilburn))
2020-01-30 00:26:52 ★ of the two strut mounts.      ((Marcus Wilburn))
2020-01-30 00:27:19 ★ Marcus Wilburn keeps the ratchet in his left hand, he takes off the stock left side strut mount and tosses
2020-01-30 00:27:29 ★ it aside.      ((Marcus Wilburn))
2020-01-30 00:27:50 ★ Marcus Wilburn bends over and picks up the adjustable top mount that came with the coilover kit.
2020-01-30 00:29:11 ★ Marcus Wilburn separates the new top mount and places the bottom piece under the strut tower.
2020-01-30 00:29:34 ★ Marcus Wilburn puts the top piece on top of that, he lines up the mounting holes and inserts the
2020-01-30 00:30:11 ★ washers around each stud from the bottom piece.      ((Marcus Wilburn))
2020-01-30 00:30:59 ADVERT: Cross Insurance | Dont want to pay for every bump you encounter on the road? Contact us today and we'll cover your Pay N Spray bills! | #6920 (( Kyle Cross ))
2020-01-30 00:31:07 ★ Marcus Wilburn hand tightens the nuts and finishes the job using his ratchet.
2020-01-30 00:31:31 ★ Marcus Wilburn kneels down and starts slowly lowering the jack to decompress the stock spring
2020-01-30 00:32:00 ★ Marcus Wilburn lowers the control arm all the way down and mans a pray bar, prying the stock spring
2020-01-30 00:32:04 ★ out of place.      ((Marcus Wilburn))
2020-01-30 00:32:31 ★ Marcus Wilburn gets the coilover and slides the top through the new camber caster mount.
2020-01-30 00:32:58 ★ Marcus Wilburn places the washer and nut on top once it's poking through the camber caster plate, he
2020-01-30 00:33:03 ★ hand tightens it for now.      ((Marcus Wilburn))
2020-01-30 00:33:50 ★ Marcus Wilburn jacks up the control arm as he lines up the knuckle with the coilover, he then
2020-01-30 00:33:56 ★ shimmies them together to fit.      ((Marcus Wilburn))
2020-01-30 00:34:22 ★ Marcus Wilburn gets the top knuckle bolt in along with the nut, he uses the ratchet and a 15mm spanner
2020-01-30 00:34:35 ★ to tighten them before moving to the bottom knuckle bolt and doing the same.      ((Marcus Wilburn))
2020-01-30 00:35:12 ★ Marcus Wilburn pushes himself up and tightens the coilover top nut.
2020-01-30 00:35:33 ★ Marcus Wilburn kneels down once again and gets the sway link bushing along with the nut, he fits them
2020-01-30 00:35:47 ★ back on and uses a 12mm socket on his ratchet to tighten it.      ((Marcus Wilburn))
2020-01-30 00:36:13 ★ Marcus Wilburn grabs the brake rotor and fits it back on before mounting the caliper on it and getting
2020-01-30 00:36:29 ★ the bucket he used to keep the brake caliper supported out from that area.      ((Marcus Wilburn))
2020-01-30 00:36:50 ★ Marcus Wilburn tightens the two bolts to secure the caliper in place, he assesses the situation as he
2020-01-30 00:36:55 ★ exhales in relief.      ((Marcus Wilburn))
2020-01-30 00:36:57  [English] Marcus Wilburn says: All good.
2020-01-30 00:39:51 ADVERT: Cross Insurance | Dont want to pay for every bump you encounter on the road? Contact us today and we'll cover your Pay N Spray bills! | #6920 (( Kyle Cross ))
2020-01-30 00:42:27 ★ Marcus Wilburn gets a C shaped wrench of the right size and turns the wheel to its outer position.
2020-01-30 00:43:13 ★ Marcus Wilburn crawls beneath the car and uses a screwdriver to loosen the steering rack boot's clamp.
2020-01-30 00:44:25 ★ Marcus Wilburn tightens that steering rack boot clamp again, he doesn't feel like installing the spacers
2020-01-30 00:44:28 ★ anymore.      ((Marcus Wilburn))
2020-01-30 00:44:56 ★ Marcus Wilburn crawls out from beneath the car and turns the steering wheel all the way to the
2020-01-30 00:44:59 ★ left.      ((Marcus Wilburn))
2020-01-30 00:45:22 ★ Marcus Wilburn carts his tool box next to the passenger side front wheel, he kneels down and grabs
2020-01-30 00:45:36 ★ his ratchet, fitting it with a 15mm socket and undoing the brake caliper as he slides      ((Marcus Wilburn))
2020-01-30 00:45:52 ★ the bucket inside and using the top surface to support the caliper and avoid damaging      ((Marcus Wilburn))
2020-01-30 00:45:56 ★ the brake lines.      ((Marcus Wilburn))
2020-01-30 00:47:16 ★ Marcus Wilburn pulls the brake rotor out and places it aside before using a 12mm spanner to undo the nut
2020-01-30 00:47:23 ★ on top of the sway bar end link.      ((Marcus Wilburn))
2020-01-30 00:47:35 ★ Marcus Wilburn removes the said nut along with the bushing and places them aside.
2020-01-30 00:48:03 ★ Marcus Wilburn retrieves a breaker bar and fits it with a 15mm socket, he uses it to break loose the two
2020-01-30 00:48:16 ★ bolts securing the strut to the steering knuckle.      ((Marcus Wilburn))
2020-01-30 00:48:52 ★ Marcus Wilburn grabs the hydraulic jack beneath the control arm and jacks it up to support it.
2020-01-30 00:49:15 ★ Marcus Wilburn finishes the loosening process of the two strut bolts with a ratchet, he then
2020-01-30 00:49:24 ★ separates the steering knuckle from the strut.      ((Marcus Wilburn))
2020-01-30 00:49:43 ★ Marcus Wilburn pushes himself up and uses a screwdriver to keep the strut shaft from turning while
2020-01-30 00:50:00 ★ he uses a spanner to undo the strut's top nut.      ((Marcus Wilburn))
2020-01-30 00:50:15 ★ Marcus Wilburn eases the strut out once it's all loose, he tosses it aside.
2020-01-30 00:50:47 ★ Marcus Wilburn slowly lowers the jack down to ease off the compressed spring.
2020-01-30 00:51:07 ★ That last comes out flying but luckily, Marcus isn't in the way as he's being extremely      ((Marcus Wilburn))
2020-01-30 00:51:12 ★ careful with it.      ((Marcus Wilburn))
2020-01-30 00:51:14  [English] Marcus Wilburn says: Fuck!
2020-01-30 00:51:25  [English] Marcus Wilburn says: Een my own car tryna kill me, fuck is up with that.
2020-01-30 00:52:27 ★ Marcus Wilburn removes the stock mounting plate as he undid the bolts securing it earlier.
2020-01-30 00:52:56 ★ Marcus Wilburn gets the new camber caster plate and fits it on just like he did to the other one.
2020-01-30 00:53:21 ★ Marcus Wilburn tightens the bolts to secure it in place, he grabs the new coilover and slides it through
2020-01-30 00:53:25 ★ the holes in that plate.      ((Marcus Wilburn))
2020-01-30 00:53:37 ★ Marcus Wilburn fits a washer and a nut on top of the coilover.
2020-01-30 00:53:59 ★ Marcus Wilburn uses his ratchet to secure it before kneeling down and jacking up the control arm until
2020-01-30 00:54:22 ★ the steering knuckle is lined up with the coilover, he mates them together and      ((Marcus Wilburn))
2020-01-30 00:54:37 ★ inserts the two bolts in place, applying nuts to their ends.      ((Marcus Wilburn))
2020-01-30 00:54:53 ★ Marcus Wilburn tightens the said nuts and puts the bushing and nut back on the sway bar end
2020-01-30 00:54:56 ★ link.      ((Marcus Wilburn))
2020-01-30 01:02:11 ★ Marcus Wilburn slides the rotor back in place.
2020-01-30 01:02:32 ★ Marcus Wilburn grabs the caliper and fits it back on as he hand tightens the two bolts.
2020-01-30 01:02:39 ★ Marcus Wilburn takes the bucket out of there, putting it away.
2020-01-30 01:02:51 ★ Marcus Wilburn tightens the two bolts on the brake caliper using his ratchet.
2020-01-30 01:21:31 ★ Marcus Wilburn moves to the rear side, he pops the trunk open and takes the carpet out of the way.
2020-01-30 01:21:42 ★ Marcus Wilburn pulls the trim out right after, he tosses it aside.
2020-01-30 01:24:53 ★ Marcus Wilburn reveals the struts bolts, he slides the jack beneath the rear end and jacks the suspension
2020-01-30 01:25:03 ★ up to support it and keep the springs compressed.      ((Marcus Wilburn))
2020-01-30 01:34:11 ★ Marcus Wilburn fits the ratchet with a 15mm socket and undoes the nut on top of the left rear shock
2020-01-30 01:34:17 ★ that is located in the trunk.      ((Marcus Wilburn))
2020-01-30 01:36:02 ★ Marcus Wilburn kneels down and undoes the shock's bottom bolt, he then eases it out and puts it aside.
2020-01-30 01:38:01 ★ Marcus Wilburn grabs a spring compressor tool and uses it to compress the spring before dropping the jack
2020-01-30 01:38:11 ★ and pulling the spring out.      ((Marcus Wilburn))
2020-01-30 01:38:28 ★ Marcus Wilburn unmounts the compressor tool and places it aside as he gets the coilover in place
2020-01-30 01:38:36 ★ where the stock shock used to be.      ((Marcus Wilburn))
2020-01-30 01:38:48 ★ Marcus Wilburn secures the bottom bolt and nut with a 15 socket and his ratchet.
2020-01-30 01:39:07 ★ Marcus Wilburn pushes himself up and secures the top nut in the trunk to firmly mount it in.
2020-01-30 01:39:26 ★ Marcus Wilburn jacks up the suspension again and moves to the right side.
2020-01-30 01:41:28 ★ Marcus Wilburn unscrews the top nut on the shock and kneels down, he slots a 15mm socket on his ratchet
2020-01-30 01:41:41 ★ and uses it to undo the fucking bottom bolt.      ((Marcus Wilburn))
2020-01-30 01:41:59 ★ Marcus Wilburn compresses the spring with the tool and slightly drops the suspension as he gets the
2020-01-30 01:42:06 ★ spring out.      ((Marcus Wilburn))
2020-01-30 01:42:23 ★ Marcus Wilburn grabs the new coilover and mounts it in before securing the bottom using the
2020-01-30 01:42:32 ★ new bolt and the ratchet.      ((Marcus Wilburn))
2020-01-30 01:42:52 ★ Marcus Wilburn pushes himself up and tightens the nut on top of the coilover.
2020-01-30 01:43:13 ★ Marcus Wilburn picks up the trunk trim, he puts it back on along with the carpet before shutting the trunk.
2020-01-30 01:44:22  [English] Marcus Wilburn says: This shit boring as -phuck-..
2020-01-30 01:47:18 ★ Marcus Wilburn rubs his hands together as he exhales sharply, looking at the boxes.
2020-01-30 01:47:42 ★ Marcus Wilburn pushes the said boxes near the tire machine one by one, he sighs before pulling a
2020-01-30 01:47:52 ★ switchblade out and opening them.      ((Marcus Wilburn))
2020-01-30 01:51:33 ★ Marcus Wilburn takes the first wheel out of the box and unwraps it before slotting it in the tire machine.
2020-01-30 01:52:27 ★ Marcus Wilburn grabs a tire out of the second box and unwraps it as well prior to placing it on
2020-01-30 01:52:45 ★ the floor.      ((Marcus Wilburn))
2020-01-30 01:53:10 ★ Marcus Wilburn grabs a brush and dips it in lubricant before applying as much as he can to the bead of
2020-01-30 01:53:29 ★ the said tire, loading it on top of the rim and turning on the machine afterwards.      ((Marcus Wilburn))
2020-01-30 01:54:03 ★ Marcus Wilburn unwraps a second tire and lubricates the bead as he waits for the machine to finish
2020-01-30 01:54:07 ★ with the first one.      ((Marcus Wilburn))
2020-01-30 01:54:41 ★ Marcus Wilburn unloads the wheel out of the machine once it's done, he places it aside and takes
2020-01-30 01:55:00 ★ a new rim out of the box, putting it in the machine with the tire he lubricated on top of it      ((Marcus Wilburn))
2020-01-30 01:55:13 ★ he then pushes a button on the machine to start the cycle again.      ((Marcus Wilburn))
2020-01-30 01:55:38 ★ Marcus Wilburn grabs a third tire out the box and undoes the plastic wrap before coating the bead with
2020-01-30 01:55:43 ★ lube.      ((Marcus Wilburn))
2020-01-30 01:56:01 ★ Marcus Wilburn has nasty thoughs of anal sex as he does so.
2020-01-30 01:56:08  [English] Marcus Wilburn says: 'amn..
2020-01-30 01:56:35 ★ Marcus Wilburn takes the second wheel out the machine and places it next to the first one when it's done.
2020-01-30 01:57:05 ★ Marcus Wilburn slots a third rim on the machine, and moves the tire right on top of it, he starts the
2020-01-30 01:57:10 ★ mounting cycle again.      ((Marcus Wilburn))
2020-01-30 01:57:34 [MOD] (12) Junior Moderator Kaden Jackson (Machiavelli): this car
2020-01-30 01:57:36 [MOD] (12) Junior Moderator Kaden Jackson (Machiavelli): goes 340
2020-01-30 01:57:37 ★ Marcus Wilburn grabs a final tire out the box and unwraps it prior to lubricating the bead with the brush.
2020-01-30 01:59:12 ★ Marcus Wilburn puts the third assembled wheel down and mounts a 4th rim on the machine, placing
2020-01-30 01:59:24 ★ the last tire on top of it and pressing the start cycle button as he yawns.      ((Marcus Wilburn))
2020-01-30 01:59:31  [English] Marcus Wilburn says: This shit be taking ages..
2020-01-30 01:59:51 ★ Marcus Wilburn awaits for the 4th assembled wheel to finish, he moves all four wheels next to the
2020-01-30 01:59:53 ★ car.      ((Marcus Wilburn))
2020-01-30 02:02:32 ★ Marcus Wilburn places the 15x13 rear left wheel in place and slots in the 5 lug nuts before using his impact
2020-01-30 02:02:38 ★ wrench to tighten them.      ((Marcus Wilburn))
2020-01-30 02:03:08 ★ Marcus Wilburn grabs the hose from the air compressor and fills the tire with air until she beeps.
2020-01-30 02:04:08 ★ Marcus Wilburn moves to the front side of the car and mounts an 18x8.5 in the front left wheel well.
2020-01-30 02:04:28 ★ Marcus Wilburn impacts the lugs after hand tightening them, he places the tip of the air compressor hose
2020-01-30 02:04:36 ★ on the valve and fills that sucker with air.      ((Marcus Wilburn))
2020-01-30 02:04:45 ★ Marcus Wilburn makes his way to the front right side.
2020-01-30 02:05:24 ★ Marcus Wilburn fits another 18x8.5 in place, he fastens the five lug nuts and fills that tire with
2020-01-30 02:05:27 ★ air.      ((Marcus Wilburn))
2020-01-30 02:05:54 ★ Marcus Wilburn finally gets to the rear right wheel well, he mounts the last 15x13 wheel on and
2020-01-30 02:06:14 ★ tightens the lug nuts using the impact wrench before undoing the cap on the valve      ((Marcus Wilburn))
2020-01-30 02:06:26 ★ and fitting the tip of the air hose, pumping air inside.      ((Marcus Wilburn))
2020-01-30 02:06:49 ★ Marcus Wilburn places the tools inside the tool box and cleans any mess, collecting the old parts
2020-01-30 02:07:06 ★ and finally lowering the car on its four wheels before undoing the lift arms.      ((Marcus Wilburn))