API tools faq
paste
Advertisement
Guest User

Arcade1Up SF2 boot serial output

a guest
Dec 2nd, 2018
1,912
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.92 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2014.04-10734-gfec9bf7-dirty (May 14 2018 - 13:40:46)
  2. Board: A13-OLinuXino
  3. LCD BL-EN off GPIO1 low
  4. DRAM:CLK: 432MHz
  5. 128 MiB
  6. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  7. spl: not an uImage at 1600
  8. load addr=0x41FFFFC0
  9.  
  10.  
  11. U-Boot 2014.04-10734-gfec9bf7-dirty (May 14 2018 - 13:40:46) Allwinner Technology
  12.  
  13. CPU: Allwinner A13 (SUN5I)
  14. Board: A13-OLinuXino
  15. I2C: ready
  16. DRAM: 128 MiB
  17. MMC: SUNXI SD/MMC: 0
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: No ethernet found.
  22. Hit any key to stop autoboot: 0
  23. reading uEnv.txt
  24. ** Unable to read file uEnv.txt **
  25. Failed to mount ext2 filesystem...
  26. ** Unrecognized filesystem type **
  27. Failed to mount ext2 filesystem...
  28. ** Unrecognized filesystem type **
  29. reading boot.scr
  30. ** Unable to read file boot.scr **
  31. Failed to mount ext2 filesystem...
  32. ** Unrecognized filesystem type **
  33. Failed to mount ext2 filesystem...
  34. ** Unrecognized filesystem type **
  35. reading script.bin
  36. 26904 bytes read in 28 ms (937.5 KiB/s)
  37. reading uImage
  38. 4197408 bytes read in 294 ms (13.6 MiB/s)
  39. ## Booting kernel from Legacy Image at 46000000 ...
  40. Image Name: Linux-3.4.43
  41. Image Type: ARM Linux Kernel Image (uncompressed)
  42. Data Size: 4197344 Bytes = 4 MiB
  43. Load Address: 40008000
  44. Entry Point: 40008000
  45. Verifying Checksum ... OK
  46. Loading Kernel Image ... OK
  47.  
  48. Starting kernel ...
  49.  
  50. [ 0.000000] Booting Linux on physical CPU 0
  51. [ 0.000000] Initializing cgroup subsys cpuset
  52. [ 0.000000] Linux version 3.4.43 (raymanfeng@wit7910) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-29) ) #68 PREEMPT Wed Apr 25 11:32:56 CST 2018
  53. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  54. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. [ 0.000000] Machine: sun5i
  56. [ 0.000000] Ignoring tag cmdline (using the default kernel command line)
  57. [ 0.000000] Memory Reserved:
  58. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  59. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  60. [ 0.000000] sunxi: Allwinner A13 revision B (AW1625/sun5i) detected.
  61. [ 0.000000] On node 0 totalpages: 32768
  62. [ 0.000000] free_area_init_node: node 0, pgdat c07f0f70, node_mem_map c08a9000
  63. [ 0.000000] Normal zone: 256 pages used for memmap
  64. [ 0.000000] Normal zone: 0 pages reserved
  65. [ 0.000000] Normal zone: 32512 pages, LIFO batch:7
  66. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  67. [ 0.000000] pcpu-alloc: [0] 0
  68. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  69. [ 0.000000] Kernel command line: mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  70. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  71. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  72. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  73. [ 0.000000] Memory: 128MB = 128MB total
  74. [ 0.000000] Memory: 120968k/120968k available, 10104k reserved, 0K highmem
  75. [ 0.000000] Virtual kernel memory layout:
  76. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  77. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  78. [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
  79. [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  80. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  81. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  82. [ 0.000000] .text : 0xc0008000 - 0xc076343c (7534 kB)
  83. [ 0.000000] .init : 0xc0764000 - 0xc078f000 ( 172 kB)
  84. [ 0.000000] .data : 0xc0790000 - 0xc07f9f78 ( 424 kB)
  85. [ 0.000000] .bss : 0xc07f9f9c - 0xc08a8120 ( 697 kB)
  86. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  87. [ 0.000000] NR_IRQS:128
  88. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  89. [ 0.000000] Console: colour dummy device 80x30
  90. [ 0.000090] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  91. [ 0.039995] pid_max: default: 32768 minimum: 301
  92. [ 0.040104] Mount-cache hash table entries: 512
  93. [ 0.040567] Initializing cgroup subsys cpuacct
  94. [ 0.040582] Initializing cgroup subsys devices
  95. [ 0.040591] Initializing cgroup subsys freezer
  96. [ 0.040598] Initializing cgroup subsys blkio
  97. [ 0.040672] CPU: Testing write buffer coherency: ok
  98. [ 0.040862] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  99. [ 0.040927] Setting up static identity map for 0x40516fb0 - 0x40517008
  100. [ 0.041551] devtmpfs: initialized
  101. [ 0.042696] dummy:
  102. [ 0.042824] NET: Registered protocol family 16
  103. [ 0.043308] hw-breakpoint: debug architecture 0x4 unsupported.
  104. [ 0.044109] Init eGon pin module V2.0
  105. [ 0.044135] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  106. [ 0.044204] Initialize DMAC OK
  107. [ 0.047885] bio: create slab <bio-0> at 0
  108. [ 0.048159] sunxi_gpio driver init ver 1.3
  109. [ 0.048179] sunxi_gpio_probe can't find script.bin '[gpio_para]' 'gpio_used'
  110. [ 0.048198] gpio-sunxi: probe of gpio-sunxi failed with error -4
  111. [ 0.048527] SCSI subsystem initialized
  112. [ 0.048683] usbcore: registered new interface driver usbfs
  113. [ 0.048743] usbcore: registered new interface driver hub
  114. [ 0.048870] usbcore: registered new device driver usb
  115. [ 0.049246] Advanced Linux Sound Architecture Driver Version 1.0.25.
  116. [ 0.049852] cfg80211: Calling CRDA to update world regulatory domain
  117. [ 0.050426] Switching to clocksource aw_64bits_counter
  118. [ 0.050585] FS-Cache: Loaded
  119. [ 0.050733] CacheFiles: Loaded
  120. [ 0.055267] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_HOST_ONLY
  121. [ 0.055394] [sw_hcd0]: usb host driver initialize........
  122. [ 0.055445] [sw_hcd0]: open_usb_clock
  123. [ 0.075444] [sw_hcd0]: host_init_state = 0
  124. [ 0.075451] [sw_hcd0]: platform is usb host
  125. [ 0.075479] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  126. [ 0.075526] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  127. [ 0.075548] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  128. [ 0.075563] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  129. [ 0.076020] hub 1-0:1.0: USB hub found
  130. [ 0.076042] hub 1-0:1.0: 1 port detected
  131. [ 0.076075] is_on = 1, hcd0_set_vbus_cnt = 2
  132. [ 0.076392] axp driver uning configuration failed(566)
  133. [ 0.076408] axp driver uning configuration failed(578)
  134. [ 0.076615] NET: Registered protocol family 2
  135. [ 0.076803] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  136. [ 0.077125] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  137. [ 0.077188] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  138. [ 0.077228] TCP: Hash tables configured (established 4096 bind 4096)
  139. [ 0.077237] TCP: reno registered
  140. [ 0.077247] UDP hash table entries: 256 (order: 0, 4096 bytes)
  141. [ 0.077264] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  142. [ 0.077433] NET: Registered protocol family 1
  143. [ 0.077723] RPC: Registered named UNIX socket transport module.
  144. [ 0.077733] RPC: Registered udp transport module.
  145. [ 0.077740] RPC: Registered tcp transport module.
  146. [ 0.077747] RPC: Registered tcp NFSv4.1 backchannel transport module.
  147. [ 0.078380] audit: initializing netlink socket (disabled)
  148. [ 0.078423] type=2000 audit(0.059:1): initialized
  149. [ 0.084041] VFS: Disk quotas dquot_6.5.2
  150. [ 0.084184] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  151. [ 0.086534] NTFS driver 2.1.30 [Flags: R/W].
  152. [ 0.086768] fuse init (API version 7.18)
  153. [ 0.087247] msgmni has been set to 236
  154. [ 0.091105] alg: No test for stdrng (krng)
  155. [ 0.091380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  156. [ 0.091395] io scheduler noop registered
  157. [ 0.091403] io scheduler deadline registered
  158. [ 0.091432] io scheduler cfq registered (default)
  159. [ 0.091784] sunxi disp driver loaded (/dev/disp api 1.0)
  160. [ 0.091958] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  161. [ 0.092555] [uart]: used uart info.: 0x0a
  162. [ 0.092628] [uart]: serial probe 1 irq 2 mapbase 0x01c28400
  163. [ 0.112885] sunxi-uart.1: ttyS0 at MMIO 0x1c28400 (irq = 2) is a U6_16550A
  164. [ 0.729900] console [ttyS0] enabled
  165. [ 0.733622] [uart]: serial probe 3 irq 4 mapbase 0x01c28c00
  166. [ 0.759282] sunxi-uart.3: ttyS1 at MMIO 0x1c28c00 (irq = 4) is a U6_16550A
  167. [ 0.767229] brd: module loaded
  168. [ 0.772119] loop: module loaded
  169. [ 0.775263] 'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
  170. [ 0.783627] usbcore: registered new interface driver ub
  171. [ 0.788953] [spi]: sw spi init !!
  172. [ 0.792374] [spi]: sw spi init fetch spi0 uning configuration failed
  173. [ 0.798726] [spi]: Get spi devices number failed
  174. [ 0.803351] [spi]: register spi devices board info failed
  175. [ 0.808829] spi: cannot find any using configuration for all 4 spi controllers, return directly!
  176. [ 0.819407] usbcore: registered new interface driver rtl8150
  177. [ 0.825126] usbcore: registered new interface driver asix
  178. [ 0.830560] usbcore: registered new interface driver qf9700
  179. [ 0.836148] usbcore: registered new interface driver cdc_ether
  180. [ 0.842016] usbcore: registered new interface driver dm9601
  181. [ 0.847623] usbcore: registered new interface driver smsc75xx
  182. [ 0.853419] usbcore: registered new interface driver smsc95xx
  183. [ 0.859193] usbcore: registered new interface driver net1080
  184. [ 0.864891] usbcore: registered new interface driver plusb
  185. [ 0.870412] usbcore: registered new interface driver cdc_subset
  186. [ 0.876354] usbcore: registered new interface driver zaurus
  187. [ 0.881999] usbcore: registered new interface driver cdc_ncm
  188. [ 0.887677] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  189. [ 0.894255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  190. [ 0.900498] USB PMU IRQ: 0x0
  191. [ 0.903375] DRAM: USB1(0x0), USB2(0x0)
  192. [ 0.907117] ----------------------------------
  193. [ 0.911577] USB PMU IRQ: 0x0
  194. [ 0.914453] DRAM: USB1(0x0), USB2(0x0)
  195. [ 0.918194] ----------------------------------
  196. [ 0.922725] [sw-ehci1]: open clock
  197. [ 0.946065] [sw-ehci1]: Set USB Power ON
  198. [ 0.949990] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  199. [ 0.957501] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  200. [ 0.964639] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  201. [ 0.980062] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  202. [ 0.985907] hub 2-0:1.0: USB hub found
  203. [ 0.989668] hub 2-0:1.0: 1 port detected
  204. [ 0.993888] [sw-ohci1]: open clock
  205. [ 1.017231] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  206. [ 1.024383] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  207. [ 1.031456] sw-ohci sw-ohci.1: irq 40, io mem 0x01c14400
  208. [ 1.094489] hub 3-0:1.0: USB hub found
  209. [ 1.098248] hub 3-0:1.0: 1 port detected
  210. [ 1.102384] Initializing USB Mass Storage driver...
  211. [ 1.107381] usbcore: registered new interface driver usb-storage
  212. [ 1.113398] USB Mass Storage support registered.
  213. [ 1.118046] usbcore: registered new interface driver ums-alauda
  214. [ 1.123997] usbcore: registered new interface driver ums-cypress
  215. [ 1.130021] usbcore: registered new interface driver ums-datafab
  216. [ 1.136055] usbcore: registered new interface driver ums_eneub6250
  217. [ 1.142265] usbcore: registered new interface driver ums-freecom
  218. [ 1.148288] usbcore: registered new interface driver ums-isd200
  219. [ 1.154243] usbcore: registered new interface driver ums-jumpshot
  220. [ 1.160363] usbcore: registered new interface driver ums-karma
  221. [ 1.166214] usbcore: registered new interface driver ums-onetouch
  222. [ 1.172353] usbcore: registered new interface driver ums-realtek
  223. [ 1.178379] usbcore: registered new interface driver ums-sddr09
  224. [ 1.184330] usbcore: registered new interface driver ums-sddr55
  225. [ 1.190277] usbcore: registered new interface driver ums-usbat
  226. [ 1.196199] usbcore: registered new interface driver usbserial
  227. [ 1.202137] usbcore: registered new interface driver usbserial_generic
  228. [ 1.208683] USB Serial support registered for generic
  229. [ 1.213744] usbserial: USB Serial Driver core
  230. [ 1.218130] usbcore: registered new interface driver ch341
  231. [ 1.223644] USB Serial support registered for ch341-uart
  232. [ 1.228983] usbcore: registered new interface driver cp210x
  233. [ 1.234581] USB Serial support registered for cp210x
  234. [ 1.239593] usbcore: registered new interface driver ftdi_sio
  235. [ 1.245367] USB Serial support registered for FTDI USB Serial Device
  236. [ 1.251823] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  237. [ 1.257693] usbcore: registered new interface driver pl2303
  238. [ 1.263299] USB Serial support registered for pl2303
  239. [ 1.268289] ------print_msc_config-----
  240. [ 1.272130] vendor_id = 0x18d1
  241. [ 1.276219] mass_storage_id = 0x1
  242. [ 1.280048] adb_id = 0x2
  243. [ 1.283886] usb_manufacturer_name = USB Developer
  244. [ 1.288583] usb_product_name = Android
  245. [ 1.292768] usb_serial_number = 20080411
  246. [ 1.297031] msc_vendor_name = USB 2.0
  247. [ 1.301216] msc_product_name = USB Flash Driver
  248. [ 1.306172] msc_release = 100
  249. [ 1.310001] luns = 3
  250. [ 1.313665] ---------------------------
  251. [ 1.317732] mousedev: PS/2 mouse device common for all mice
  252. [ 1.323388] ========RTC Inital ===================
  253. [ 1.328187] rtc_fetch_sysconfig_para: after: rtc_twi_addr is 0x51, dirty_addr_buf: 0x51. dirty_addr_buf[1]: 0xfffe
  254. [ 1.338623] rtc_fetch_sysconfig_para: rtc_twi_id is 1.
  255. [ 1.343849] rtc_fetch_sysconfig_para:ok
  256. [ 1.347680] pcf8563_init: after fetch_sysconfig_para: normal_i2c: 0x51. normal_i2c[1]: 0xfffe
  257. [ 1.356403] i2c /dev entries driver
  258. [ 1.360125] config i2c gpio with gpio_config api
  259. [ 1.365995] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  260. [ 1.371698] [AXP]axp driver uning configuration failed(323)
  261. [ 1.377264] [AXP]power_start = 0
  262. [ 1.380514] rtc_detect,line:157,twi_id:1,adapter->nr:0
  263. [ 1.385646] rtc_detect,line:166
  264. [ 1.388784] I2C: i2c-0: AW16XX I2C adapter
  265. [ 1.393104] rtc_detect,line:157,twi_id:1,adapter->nr:1
  266. [ 1.398239] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
  267. [ 1.404946] rtc_detect,line:162
  268. [ 1.408132] pcf8563_probe,line:666
  269. [ 1.411543] pcf8563 1-0051: chip found, driver version 0.4.3
  270. [ 1.417423] incomplete xfer (0xff)
  271. [ 1.420837] pcf8563 1-0051: pcf8563_get_datetime: read error,ret:-70
  272. [ 1.427316] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
  273. [ 1.433338] I2C: i2c-1: AW16XX I2C adapter
  274. [ 1.437615] rtc_detect,line:157,twi_id:1,adapter->nr:2
  275. [ 1.442764] rtc_detect,line:166
  276. [ 1.445902] I2C: i2c-2: AW16XX I2C adapter
  277. [ 1.450111] lirc_dev: IR Remote Control driver registered, major 251
  278. [ 1.456546] IR NEC protocol handler initialized
  279. [ 1.461081] IR RC5(x) protocol handler initialized
  280. [ 1.465865] IR RC6 protocol handler initialized
  281. [ 1.470396] IR JVC protocol handler initialized
  282. [ 1.474920] IR Sony protocol handler initialized
  283. [ 1.479530] IR RC5 (streamzap) protocol handler initialized
  284. [ 1.485104] IR SANYO protocol handler initialized
  285. [ 1.489801] IR MCE Keyboard/mouse protocol handler initialized
  286. [ 1.495635] IR LIRC bridge handler initialized
  287. [ 1.500070] [pa_drv] start!!!
  288. [ 1.503243] [pa_drv] init end!!!
  289. [ 1.506553] axp20_ldo1: 1300 mV
  290. [ 1.510879] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  291. [ 1.517189] axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  292. [ 1.523398] axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  293. [ 1.529485] axp20_buck2: 700 <--> 2275 mV at 1400 mV
  294. [ 1.535787] axp20_buck3: 700 <--> 3500 mV at 1200 mV
  295. [ 1.541441] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  296. [ 1.547125] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  297. [ 1.570062] axp20_ldo2: Failed to create debugfs directory
  298. [ 1.576023] md: linear personality registered for level -1
  299. [ 1.581525] md: multipath personality registered for level -4
  300. [ 1.587264] md: faulty personality registered for level -5
  301. [ 1.593328] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  302. [ 1.602113] device-mapper: multipath: version 1.3.0 loaded
  303. [ 1.607597] device-mapper: multipath round-robin: version 1.0.0 loaded
  304. [ 1.614149] device-mapper: multipath queue-length: version 0.1.0 loaded
  305. [ 1.620766] device-mapper: multipath service-time: version 0.2.0 loaded
  306. [ 1.627630] [mmc_pm]: no sdio card used in configuration
  307. [ 1.632977] [mmc]: sunximmc_init
  308. [ 1.636292] [mmc]: sunxi mmc controller using config : 0x1
  309. [ 1.641829] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  310. [ 1.648255] [mmc]: mmc 0 power off !!
  311. [ 1.653081] [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xc79c0000, ret 0.
  312. [ 1.660821] sunxi_leds driver init
  313. [ 1.664221] sunxi leds can't find script data '[leds_para]' 'leds_used'
  314. [ 1.671361] usbcore: registered new interface driver usbhid
  315. [ 1.676928] usbhid: USB HID core driver
  316. [ 1.681077] usbcore: registered new interface driver snd-usb-audio
  317. [ 1.689108] IPv4 over IPv4 tunneling driver
  318. [ 1.693798] TCP: cubic registered
  319. [ 1.697114] Initializing XFRM netlink socket
  320. [ 1.701434] NET: Registered protocol family 17
  321. [ 1.705905] NET: Registered protocol family 15
  322. [ 1.710407] 8021q: 802.1Q VLAN Support v1.8
  323. [ 1.714693] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  324. [ 1.722391] Registering SWP/SWPB emulation handler
  325. [ 1.727205] axp20_buck2: Failed to create debugfs directory
  326. [ 1.733525] registered taskstats version 1
  327. [ 1.738776] axp_gpio_set_io: 0, 1
  328. [ 1.742587] axp_gpio_set_value: 0, 1
  329. [ 2.306864] Console: switching to colour frame buffer device 80x30
  330. [ 2.317821] axp20_buck3: incomplete constraints, leaving on
  331. [ 2.323638] axp20_buck2: incomplete constraints, leaving on
  332. [ 2.329438] axp20_ldo4: incomplete constraints, leaving on
  333. [ 2.335167] axp20_ldo3: incomplete constraints, leaving on
  334. [ 2.340889] axp20_ldo2: incomplete constraints, leaving on
  335. [ 2.346600] axp20_ldo1: incomplete constraints, leaving on
  336. [ 2.352449] incomplete xfer (0xff)
  337. [ 2.355855] pcf8563 1-0051: pcf8563_get_datetime: read error,ret:-70
  338. [ 2.362237] pcf8563 1-0051: hctosys: unable to read the hardware clock
  339. [ 2.368797] ALSA device list:
  340. [ 2.371773] #0: sunxi-CODEC Audio Codec
  341. [ 2.376123] md: Waiting for all devices to be available before autodetect
  342. [ 2.382940] md: If you don't use raid, use raid=noautodetect
  343. [ 2.389019] md: Autodetecting RAID arrays.
  344. [ 2.393138] md: Scanned 0 and added 0 devices.
  345. [ 2.397581] md: autorun ...
  346. [ 2.400379] md: ... autorun DONE.
  347. [ 2.403820] Waiting for root device /dev/mmcblk0p2...
  348. [ 2.650166] [mmc]: mmc 0 detect change, present 1
  349. [ 2.950207] [mmc]: mmc 0 power on !!
  350. [ 2.990974] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
  351. [ 2.998393] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
  352. [ 3.009456] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  353. [ 3.016795] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  354. [ 3.024135] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  355. [ 3.031470] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  356. [ 3.068761] mmc0: new high speed SD card at address 2109
  357. [ 3.074397] mmcblk0: mmc0:2109 APPSD 120 MiB
  358. [ 3.079803] mmcblk0: p1 p2 p3
  359. [ 3.083173] mmcblk0: p3 size 1048576 extends beyond EOD, truncated
  360. [ 3.170898] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  361. [ 3.180686] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
  362. [ 3.376378] EXT4-fs (mmcblk0p2): recovery complete
  363. [ 3.420129] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  364. [ 3.428272] VFS: Mounted root (ext4 filesystem) on device 179:2.
  365. [ 3.434757] devtmpfs: mounted
  366. [ 3.437948] Freeing init memory: 172K
  367. [ 3.549754] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
  368. Starting logging: OK
  369. Initializing random number generator... done.
  370. Starting network...
  371. Starting dropbear sshd: OK
  372. /etc/init.d/dhcp-relay not yet configured! - Aborting...
  373. /etc/init.d/dhcp-server not yet configured! - Aborting...
  374. [ 3.748583] axp_gpio_set_io: 1, 1
  375. [ 3.754626] axp_gpio_set_value: 1, 1
  376. sunxi_gpio_init
  377. Exit test mode
  378. killall: mplayer: no process killed
  379. sunxi_gpio_init
  380. MPlayer 1.0rc4-4.8.3 (C) 2000-2010 MPlayer Team
  381.  
  382. Playing arcade1up.avi.
  383. AVI file format detected.
  384. [aviheader] Video stream found, -vid 0
  385. [aviheader] Audio stream found, -aid 1
  386. VIDEO: [H264] 640x480 24bpp 24.000 fps 1380.3 kbps (168.5 kbyte/s)
  387. Clip info:
  388. Software: Lavf52.24.1
  389. notice: Can't open /dev/tty: No such device or address
  390. ==========================================================================
  391. Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
  392. Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
  393. ==========================================================================
  394. ==========================================================================
  395. Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
  396. AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
  397. Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
  398. ==========================================================================
  399. AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
  400. Starting playback...
  401. Could not find matching colorspace - retrying with -vf scale...
  402. Opening video filter: [scale]
  403. Movie-Aspect is undefined - no prescaling applied.
  404. [swscaler @ 0x7ab268]No accelerated colorspace conversion found from yuv420p to bgra.
  405. [swscaler @ 0x7ab268]using unscaled yuv420p -> bgra special converter
  406. VO: [fbdev] 640x480 => 640x480 BGRA
  407. A: 0.1 V: 0.0 A-V: 0.073 ct: 0.000 1/ 1 ??% ??% ??,?% 0 0
  408. A: 0.1 V: 0.0 A-V: 0.058 ct: 0.000 2/ 2 ??% ??% ??,?% 0 0
  409. A: 0.1 V: 0.1 A-V: 0.035 ct: 0.000 3/ 3 ??% ??% ??,?% 0 0
  410. A: 0.1 V: 0.1 A-V: 0.015 ct: 0.000 4/ 4 ??% ??% ??,?% 0 0
  411. A: 0.2 V: 0.2 A-V: 0.016 ct: -0.000 5/ 5 ??% ??% ??,?% 0 0
  412. A: 0.2 V: 0.2 A-V: 0.003 ct: -0.000 6/ 6 ??% ??% ??,?% 0 0
  413. A: 0.3 V: 0.2 A-V: 0.012 ct: 0.000 7/ 7 ??% ??% ??,?% 0 0
  414. A: 0.3 V: 0.3 A-V: -0.001 ct: 0.000 8/ 8 ??% ??% ??,?% 0 0
  415. A: 0.4 V: 0.3 A-V: 0.019 ct: 0.000 9/ 9 ??% ??% ??,?% 0 0
  416. A: 0.4 V: 0.4 A-V: 0.005 ct: 0.000 10/ 10 ??% ??% ??,?% 0 0
  417. A: 0.4 V: 0.4 A-V: 0.015 ct: 0.000 11/ 11 ??% ??% ??,?% 0 0
  418. A: 0.5 V: 0.5 A-V: 0.014 ct: 0.000 12/ 12 ??% ??% ??,?% 0 0
  419. A: 0.5 V: 0.5 A-V: 0.000 ct: 0.000 13/ 13 ??% ??% ??,?% 0 0
  420. A: 0.6 V: 0.5 A-V: 0.020 ct: 0.000 14/ 14 38% 27% 10.0% 0 0
  421. A: 0.6 V: 0.6 A-V: 0.004 ct: 0.000 15/ 15 37% 27% 10.0% 0 0
  422. A: 0.6 V: 0.6 A-V: 0.016 ct: 0.000 16/ 16 36% 27% 9.6% 0 0
  423. A: 0.7 V: 0.7 A-V: 0.015 ct: 0.000 17/ 17 35% 27% 9.6% 0 0
  424. A: 0.7 V: 0.7 A-V: 0.013 ct: 0.000 18/ 18 34% 26% 9.6% 0 0
  425. A: 0.8 V: 0.8 A-V: 0.012 ct: -0.000 19/ 19 34% 26% 9.6% 0 0
  426. A: 0.8 V: 0.8 A-V: 0.020 ct: 0.000 20/ 20 33% 26% 9.1% 0 0
  427. A: 0.8 V: 0.8 A-V: 0.002 ct: 0.000 21/ 21 32% 26% 9.2% 0 0
  428. A: 0.9 V: 0.9 A-V: 0.017 ct: 0.000 22/ 22 32% 26% 9.0% 0 0
  429. A: 0.9 V: 0.9 A-V: 0.001 ct: 0.000 23/ 23 31% 26% 9.2% 0 0
  430. A: 1.0 V: 1.0 A-V: 0.014 ct: 0.000 24/ 24 31% 26% 9.1% 0 0
  431. A: 1.0 V: 1.0 A-V: 0.012 ct: 0.000 25/ 25 30% 26% 8.9% 0 0
  432. A: 1.1 V: 1.0 A-V: 0.020 ct: 0.000 26/ 26 30% 26% 8.9% 0 0
  433. A: 1.1 V: 1.1 A-V: 0.003 ct: 0.000 27/ 27 30% 26% 8.9% 0 0
  434. A: 1.1 V: 1.1 A-V: 0.017 ct: 0.000 28/ 28 29% 26% 8.8% 0 0
  435. A: 1.2 V: 1.2 A-V: 0.002 ct: 0.000 29/ 29 29% 26% 9.0% 0 0
  436. A: 1.2 V: 1.2 A-V: 0.013 ct: 0.000 30/ 30 29% 26% 8.7% 0 0
  437. A: 1.3 V: 1.2 A-V: 0.012 ct: 0.000 31/ 31 29% 26% 8.7% 0 0
  438. A: 1.3 V: 1.3 A-V: 0.010 ct: 0.000 32/ 32 28% 26% 8.7% 0 0
  439. A: 1.4 V: 1.3 A-V: 0.018 ct: 0.000 33/ 33 28% 26% 8.8% 0 0
  440. A: 1.4 V: 1.4 A-V: -0.000 ct: 0.000 34/ 34 28% 26% 8.8% 0 0
  441. A: 1.4 V: 1.4 A-V: 0.014 ct: -0.000 35/ 35 28% 25% 8.5% 0 0
  442. A: 1.5 V: 1.5 A-V: 0.013 ct: -0.000 36/ 36 27% 25% 8.5% 0 0
  443. A: 1.5 V: 1.5 A-V: 0.011 ct: -0.000 37/ 37 27% 25% 8.6% 0 0
  444. A: 1.6 V: 1.5 A-V: 0.020 ct: -0.000 38/ 38 27% 25% 8.6% 0 0
  445. A: 1.6 V: 1.6 A-V: 0.001 ct: -0.000 39/ 39 27% 25% 8.6% 0 0
  446. A: 1.6 V: 1.6 A-V: 0.017 ct: -0.000 40/ 40 27% 25% 8.4% 0 0
  447. A: 1.7 V: 1.7 A-V: 0.015 ct: -0.000 41/ 41 26% 25% 8.4% 0 0
  448. A: 1.7 V: 1.7 A-V: 0.013 ct: -0.000 42/ 42 26% 25% 8.5% 0 0
  449. A: 1.8 V: 1.8 A-V: 0.012 ct: 0.000 43/ 43 26% 25% 8.5% 0 0
  450. A: 1.8 V: 1.8 A-V: 0.019 ct: 0.000 44/ 44 26% 25% 8.4% 0 0
  451. A: 1.8 V: 1.8 A-V: 0.003 ct: 0.000 45/ 45 26% 25% 8.5% 0 0
  452. A: 1.9 V: 1.9 A-V: 0.016 ct: -0.000 46/ 46 26% 25% 8.4% 0 0
  453. A: 1.9 V: 1.9 A-V: 0.005 ct: 0.000 47/ 47 26% 25% 8.4% 0 0
  454. A: 2.0 V: 2.0 A-V: 0.003 ct: 0.000 48/ 48 26% 25% 8.3% 0 0
  455. A: 2.0 V: 2.0 A-V: 0.002 ct: 0.000 49/ 49 26% 25% 8.4% 0 0
  456. A: 2.0 V: 2.0 A-V: 0.000 ct: 0.000 50/ 50 26% 25% 8.3% 0 0
  457. A: 2.1 V: 2.1 A-V: 0.008 ct: 0.000 51/ 51 25% 25% 8.2% 0 0
  458. A: 2.1 V: 2.1 A-V: 0.006 ct: 0.000 52/ 52 25% 25% 8.3% 0 0
  459. A: 2.2 V: 2.2 A-V: 0.005 ct: 0.000 53/ 53 25% 25% 8.3% 0 0
  460. A: 2.2 V: 2.2 A-V: 0.003 ct: 0.000 54/ 54 25% 25% 8.3% 0 0
  461. A: 2.3 V: 2.2 A-V: 0.001 ct: 0.000 55/ 55 25% 25% 8.2% 0 0
  462. A: 2.3 V: 2.3 A-V: 0.010 ct: 0.000 56/ 56 25% 25% 8.2% 0 0
  463. A: 2.3 V: 2.3 A-V: 0.008 ct: 0.000 57/ 57 25% 25% 8.3% 0 0
  464. A: 2.4 V: 2.4 A-V: 0.007 ct: 0.000 58/ 58 25% 25% 8.3% 0 0
  465. A: 2.4 V: 2.4 A-V: 0.005 ct: 0.000 59/ 59 25% 25% 8.3% 0 0
  466. A: 2.5 V: 2.5 A-V: 0.003 ct: 0.000 60/ 60 25% 25% 8.2% 0 0
  467. A: 2.5 V: 2.5 A-V: 0.002 ct: 0.000 61/ 61 25% 25% 8.2% 0 0
  468. A: 2.6 V: 2.5 A-V: 0.010 ct: 0.000 62/ 62 25% 25% 8.2% 0 0
  469. A: 2.6 V: 2.6 A-V: 0.008 ct: 0.000 63/ 63 25% 25% 8.2% 0 0
  470. A: 2.6 V: 2.6 A-V: 0.006 ct: 0.000 64/ 64 25% 25% 8.2% 0 0
  471. A: 2.7 V: 2.7 A-V: 0.005 ct: 0.000 65/ 65 25% 25% 8.2% 0 0
  472. A: 2.7 V: 2.7 A-V: 0.003 ct: 0.000 66/ 66 25% 25% 8.2% 0 0
  473. A: 2.8 V: 2.8 A-V: 0.001 ct: 0.000 67/ 67 25% 25% 8.1% 0 0
  474. A: 2.8 V: 2.8 A-V: 0.009 ct: 0.000 68/ 68 25% 25% 8.2% 0 0
  475. A: 2.8 V: 2.8 A-V: 0.007 ct: 0.000 69/ 69 25% 25% 8.2% 0 0
  476. A: 2.9 V: 2.9 A-V: 0.006 ct: 0.000 70/ 70 25% 25% 8.1% 0 0
  477. A: 2.9 V: 2.9 A-V: 0.004 ct: -0.000 71/ 71 25% 25% 8.2% 0 0
  478. A: 3.0 V: 3.0 A-V: 0.002 ct: -0.000 72/ 72 24% 25% 8.1% 0 0
  479. A: 3.0 V: 3.0 A-V: 0.001 ct: -0.000 73/ 73 24% 25% 8.1% 0 0
  480. A: 3.1 V: 3.0 A-V: 0.010 ct: -0.000 74/ 74 24% 25% 8.2% 0 0
  481. A: 3.1 V: 3.1 A-V: 0.008 ct: -0.000 75/ 75 24% 25% 8.1% 0 0
  482. A: 3.1 V: 3.1 A-V: 0.006 ct: 0.000 76/ 76 24% 25% 8.1% 0 0
  483. A: 3.2 V: 3.2 A-V: 0.005 ct: 0.000 77/ 77 24% 25% 8.1% 0 0
  484. A: 3.2 V: 3.2 A-V: 0.003 ct: 0.000 78/ 78 24% 25% 8.1% 0 0
  485. A: 3.3 V: 3.2 A-V: 0.001 ct: 0.000 79/ 79 24% 25% 8.1% 0 0
  486. A: 3.3 V: 3.3 A-V: 0.009 ct: 0.000 80/ 80 24% 25% 8.1% 0 0
  487. A: 3.3 V: 3.3 A-V: 0.007 ct: 0.000 81/ 81 24% 25% 8.1% 0 0
  488. A: 3.4 V: 3.4 A-V: 0.006 ct: -0.000 82/ 82 24% 25% 8.1% 0 0
  489. A: 3.4 V: 3.4 A-V: 0.004 ct: -0.000 83/ 83 24% 25% 8.1% 0 0
  490. A: 3.5 V: 3.5 A-V: 0.003 ct: 0.000 84/ 84 24% 25% 8.1% 0 0
  491. A: 3.5 V: 3.5 A-V: 0.001 ct: -0.000 85/ 85 24% 25% 8.1% 0 0
  492. A: 3.6 V: 3.5 A-V: 0.010 ct: 0.000 86/ 86 24% 25% 8.0% 0 0
  493. A: 3.6 V: 3.6 A-V: 0.008 ct: 0.000 87/ 87 24% 25% 8.0% 0 0
  494. A: 3.6 V: 3.6 A-V: 0.006 ct: 0.000 88/ 88 24% 25% 8.1% 0 0
  495. A: 3.7 V: 3.7 A-V: 0.005 ct: 0.000 89/ 89 24% 25% 8.1% 0 0
  496. A: 3.7 V: 3.7 A-V: 0.003 ct: 0.000 90/ 90 24% 25% 8.0% 0 0
  497. A: 3.8 V: 3.8 A-V: 0.001 ct: 0.000 91/ 91 24% 25% 8.0% 0 0
  498. A: 3.8 V: 3.8 A-V: 0.009 ct: 0.000 92/ 92 24% 25% 8.0% 0 0
  499. A: 3.8 V: 3.8 A-V: 0.008 ct: 0.000 93/ 93 24% 25% 8.1% 0 0
  500. A: 3.9 V: 3.9 A-V: 0.006 ct: 0.000 94/ 94 24% 25% 8.1% 0 0
  501. A: 3.9 V: 3.9 A-V: 0.004 ct: 0.000 95/ 95 24% 25% 8.0% 0 0
  502. A: 4.0 V: 4.0 A-V: 0.003 ct: 0.000 96/ 96 24% 25% 8.0% 0 0
  503. A: 4.0 V: 4.0 A-V: 0.001 ct: 0.000 97/ 97 24% 25% 8.0% 0 0
  504. A: 4.1 V: 4.0 A-V: 0.009 ct: -0.000 98/ 98 24% 25% 8.0% 0 0
  505. A: 4.1 V: 4.1 A-V: 0.007 ct: -0.000 99/ 99 24% 25% 8.0% 0 0
  506. A: 4.1 V: 4.1 A-V: 0.005 ct: -0.000 100/100 24% 25% 8.0% 0 0
  507. A: 4.2 V: 4.2 A-V: 0.004 ct: -0.000 101/101 24% 25% 8.0% 0 0
  508. A: 4.2 V: 4.2 A-V: 0.002 ct: -0.000 102/102 24% 25% 8.0% 0 0
  509. A: 4.3 V: 4.2 A-V: 0.011 ct: -0.000 103/103 24% 25% 8.0% 0 0
  510. A: 4.3 V: 4.3 A-V: 0.009 ct: -0.000 104/104 24% 25% 8.0% 0 0
  511. A: 4.3 V: 4.3 A-V: 0.008 ct: -0.000 105/105 24% 25% 8.0% 0 0
  512. A: 4.4 V: 4.4 A-V: 0.006 ct: -0.000 106/106 24% 25% 8.0% 0 0
  513. A: 4.4 V: 4.4 A-V: 0.004 ct: -0.000 107/107 24% 25% 8.0% 0 0
  514. A: 4.5 V: 4.5 A-V: 0.003 ct: -0.000 108/108 24% 25% 8.0% 0 0
  515. A: 4.5 V: 4.5 A-V: 0.001 ct: -0.000 109/109 23% 25% 8.0% 0 0
  516. A: 4.6 V: 4.5 A-V: 0.009 ct: -0.000 110/110 23% 25% 8.0% 0 0
  517. A: 4.6 V: 4.6 A-V: 0.007 ct: -0.000 111/111 23% 25% 7.9% 0 0
  518. A: 4.6 V: 4.6 A-V: 0.005 ct: -0.000 112/112 23% 25% 7.9% 0 0
  519. A: 4.7 V: 4.7 A-V: 0.004 ct: -0.000 113/113 23% 25% 8.0% 0 0
  520. A: 4.7 V: 4.7 A-V: 0.002 ct: -0.000 114/114 23% 25% 8.0% 0 0
  521. A: 4.8 V: 4.8 A-V: 0.011 ct: -0.000 115/115 23% 25% 7.9% 0 0
  522. A: 4.8 V: 4.8 A-V: 0.009 ct: 0.000 116/116 23% 25% 7.9% 0 0
  523. A: 4.8 V: 4.8 A-V: 0.008 ct: 0.000 117/117 23% 25% 7.9% 0 0
  524. A: 4.9 V: 4.9 A-V: 0.006 ct: 0.000 118/118 23% 25% 7.9% 0 0
  525. A: 4.9 V: 4.9 A-V: 0.004 ct: 0.000 119/119 23% 25% 7.9% 0 0
  526. A: 5.0 V: 5.0 A-V: 0.003 ct: 0.000 120/120 23% 25% 7.9% 0 0
  527. A: 5.0 V: 5.0 A-V: 0.001 ct: 0.000 121/121 23% 25% 7.9% 0 0
  528. A: 5.1 V: 5.0 A-V: 0.009 ct: 0.000 122/122 23% 25% 7.9% 0 0
  529. A: 5.1 V: 5.1 A-V: 0.007 ct: 0.000 123/123 23% 25% 7.9% 0 0
  530. A: 5.1 V: 5.1 A-V: 0.006 ct: 0.000 124/124 23% 25% 7.9% 0 0
  531. A: 5.2 V: 5.2 A-V: 0.004 ct: 0.000 125/125 23% 25% 7.9% 0 0
  532. A: 5.2 V: 5.2 A-V: 0.002 ct: 0.000 126/126 23% 25% 7.9% 0 0
  533. A: 5.3 V: 5.2 A-V: 0.001 ct: 0.000 127/127 23% 25% 7.9% 0 0
  534. A: 5.3 V: 5.3 A-V: 0.008 ct: -0.000 128/128 23% 25% 7.9% 0 0
  535. A: 5.3 V: 5.3 A-V: 0.007 ct: -0.000 129/129 23% 25% 7.9% 0 0
  536. A: 5.4 V: 5.4 A-V: 0.005 ct: -0.000 130/130 23% 25% 7.9% 0 0
  537. A: 5.4 V: 5.4 A-V: 0.003 ct: -0.000 131/131 23% 25% 7.9% 0 0
  538. A: 5.5 V: 5.5 A-V: 0.002 ct: -0.000 132/132 23% 25% 7.9% 0 0
  539. A: 5.5 V: 5.5 A-V: 0.000 ct: -0.000 133/133 23% 25% 7.9% 0 0
  540. A: 5.6 V: 5.5 A-V: 0.009 ct: -0.000 134/134 23% 25% 7.9% 0 0
  541. A: 5.6 V: 5.6 A-V: 0.007 ct: 0.000 135/135 23% 25% 7.9% 0 0
  542. A: 5.6 V: 5.6 A-V: 0.006 ct: 0.000 136/136 23% 25% 7.8% 0 0
  543. A: 5.7 V: 5.7 A-V: 0.004 ct: 0.000 137/137 23% 25% 7.9% 0 0
  544. A: 5.7 V: 5.7 A-V: 0.002 ct: 0.000 138/138 23% 25% 7.9% 0 0
  545. A: 5.8 V: 5.8 A-V: 0.001 ct: 0.000 139/139 23% 25% 7.8% 0 0
  546. A: 5.8 V: 5.8 A-V: 0.009 ct: 0.000 140/140 23% 25% 7.9% 0 0
  547. A: 5.8 V: 5.8 A-V: 0.007 ct: 0.000 141/141 23% 25% 7.8% 0 0
  548. A: 5.9 V: 5.9 A-V: 0.005 ct: 0.000 142/142 23% 25% 7.9% 0 0
  549. A: 5.9 V: 5.9 A-V: 0.004 ct: -0.000 143/143 23% 25% 7.9% 0 0
  550. A: 6.0 V: 6.0 A-V: 0.002 ct: -0.000 144/144 23% 25% 7.8% 0 0
  551. A: 6.0 V: 6.0 A-V: 0.000 ct: -0.000 145/145 23% 25% 7.9% 0 0
  552. A: 6.1 V: 6.0 A-V: 0.009 ct: -0.000 146/146 23% 25% 7.8% 0 0
  553. A: 6.1 V: 6.1 A-V: 0.007 ct: 0.000 147/147 23% 25% 7.8% 0 0
  554. A: 6.1 V: 6.1 A-V: 0.006 ct: 0.000 148/148 23% 25% 7.9% 0 0
  555. A: 6.2 V: 6.2 A-V: 0.004 ct: 0.000 149/149 23% 25% 7.9% 0 0
  556. A: 6.2 V: 6.2 A-V: 0.002 ct: 0.000 150/150 23% 25% 7.8% 0 0
  557. A: 6.3 V: 6.2 A-V: 0.000 ct: 0.000 151/151 23% 25% 7.8% 0 0
  558. A: 6.3 V: 6.3 A-V: 0.009 ct: 0.000 152/152 23% 25% 7.8% 0 0
  559. A: 6.3 V: 6.3 A-V: 0.007 ct: 0.000 153/153 22% 25% 7.9% 0 0
  560. A: 6.4 V: 6.4 A-V: 0.005 ct: 0.000 154/154 22% 25% 7.9% 0 0
  561. A: 6.4 V: 6.4 A-V: 0.004 ct: 0.000 155/155 22% 25% 7.8% 0 0
  562. A: 6.5 V: 6.5 A-V: 0.002 ct: 0.000 156/156 22% 25% 7.8% 0 0
  563. A: 6.5 V: 6.5 A-V: 0.000 ct: 0.000 157/157 22% 25% 7.8% 0 0
  564. A: 6.5 V: 6.5 A-V: 0.008 ct: 0.000 158/158 22% 25% 7.8% 0 0
  565. A: 6.6 V: 6.6 A-V: 0.006 ct: 0.000 159/159 22% 25% 7.9% 0 0
  566. A: 6.6 V: 6.6 A-V: 0.005 ct: 0.000 160/160 22% 25% 7.8% 0 0
  567. A: 6.7 V: 6.7 A-V: 0.003 ct: 0.000 161/161 22% 25% 7.8% 0 0
  568. A: 6.7 V: 6.7 A-V: 0.002 ct: -0.000 162/162 22% 25% 7.8% 0 0
  569. A: 6.8 V: 6.8 A-V: 0.010 ct: -0.000 163/163 22% 25% 7.8% 0 0
  570. A: 6.8 V: 6.8 A-V: 0.009 ct: 0.000 164/164 22% 25% 7.8% 0 0
  571. A: 6.8 V: 6.8 A-V: 0.007 ct: 0.000 165/165 22% 25% 7.8% 0 0
  572. A: 6.9 V: 6.9 A-V: 0.005 ct: 0.000 166/166 22% 25% 7.8% 0 0
  573. A: 6.9 V: 6.9 A-V: 0.004 ct: 0.000 167/167 22% 25% 7.8% 0 0
  574. A: 7.0 V: 7.0 A-V: 0.002 ct: 0.000 168/168 22% 25% 7.7% 0 0
  575. A: 7.0 V: 7.0 A-V: 0.010 ct: 0.000 169/169 22% 25% 7.7% 0 0
  576. A: 7.0 V: 7.0 A-V: 0.008 ct: 0.000 170/170 22% 25% 7.7% 0 0
  577. A: 7.0 V: 7.0 A-V: 0.008 ct: 0.000 170/170 22% 25% 7.7% 0 0
  578.  
  579.  
  580. Exiting... (End of file)
  581. cat: can't open '/tmp/selected': No such file or directory
  582. open fb=3
  583. fb init OK
  584. menu ver:May 28 2018
  585. game count=3
  586.  
  587.  
  588. sunxi_gpio_init
  589. reset uart buffer
  590. fcntl=0
  591. fd->open=3
  592. new thread_serial_mouse: pid 94 tid 3069518592 (0xb6f52300)
  593. Welcome to Buildroot
  594.  
  595. buildroot login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!