Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 143207776
- 3 Spin_Up_Time PO---- 099 097 000 - 0
- 4 Start_Stop_Count -O--CK 099 099 020 - 1527
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 7 Seek_Error_Rate POSR-- 100 253 030 - 963461
- 9 Power_On_Hours -O--CK 083 083 000 - 15491
- 10 Spin_Retry_Count PO--C- 100 100 097 - 0
- 12 Power_Cycle_Count -O--CK 100 100 020 - 415
- 183 Runtime_Bad_Block -O--CK 092 092 000 - 8
- 184 End-to-End_Error -O--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 100 100 000 - 0
- 188 Command_Timeout -O--CK 100 099 000 - 0 0 3
- 189 High_Fly_Writes -O-RCK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 060 041 045 Past 40 (Min/Max 40/44 #781)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 099 099 000 - 3843
- 193 Load_Cycle_Count -O--CK 065 065 000 - 71452
- 194 Temperature_Celsius -O---K 040 059 000 - 40 (0 14 0 0 0)
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----C- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 200 194 000 - 229
- 240 Head_Flying_Hours ------ 100 253 000 - 10279h+28m+12.831s
- 241 Total_LBAs_Written ------ 100 253 000 - 21132287727
- 242 Total_LBAs_Read ------ 100 253 000 - 17697346764
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 SATA NCQ Queued Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 20 Device vendor specific log
- 0xa2 GPL VS 4496 Device vendor specific log
- 0xa8 GPL,SL VS 129 Device vendor specific log
- 0xa9 GPL,SL VS 1 Device vendor specific log
- 0xab GPL VS 1 Device vendor specific log
- 0xb0 GPL VS 5176 Device vendor specific log
- 0xbe-0xbf GPL VS 65535 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL,SL VS 10 Device vendor specific log
- 0xc4 GPL,SL VS 5 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Interrupted (host reset) 00% 15490 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 522 (0x020a)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 42 Celsius
- Power Cycle Min/Max Temperature: 42/44 Celsius
- Lifetime Min/Max Temperature: 14/59 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Data Table command not supported
- SCT Error Recovery Control command not supported
- Device Statistics (GP/SMART Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement