uboot13-udoo-sata

UDOO board => printenv
baudrate=115200
boot_fdt=try
bootcmd=if run loadbootscript; then run bootscript; else run sataboot; run mmcboot; run netboot; fi;
bootdelay=5
bootscript=echo Running bootscript from mmc ...; source
console=ttymxc1
ethact=FEC
ethaddr=00:c0:08:88:18:30
ethprime=FEC
fdt_addr=0x11000000
fdt_file=imx6q-udoo.dtb
fdt_high=0xffffffff
filesize=4910a4
initrd_high=0xffffffff
ip_dyn=yes
loadaddr=0x12000000
loadbootscript=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}
loaduimagesata=ext2load sata ${satadev}:${satapart} ${loadaddr} ${uimage}
mmc=/dev/sda1 rootwait rw
mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} ${hdmi_patch} fbmem=24M video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32
mmcboot=if mmc rescan; then echo Booting from mmc ...; run mmcloaduimage; run mmcargs; bootm; else mmc boot failed; fi;
mmcdev=0
mmcloaduimage=ext2load mmc 0:1 0x12000000 /boot/uImage
mmcpart=1
mmcroot=/dev/mmcblk0p1
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ${hdmi_patch} ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${uimage}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootm ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootm; else echo WARN: Cannot load the DT; fi; fi; else bootm; fi;
sataargs=setenv bootargs console=${console},${baudrate} root=${sataroot} ${hdmi_patch} fbmem=24M video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32
sataboot=echo Booting from sata ...; run sataargs ; bootm
satadev=0
sataloaduimage=ext2load sata 0:1 0x12000000 /boot/uImage
satapart=1
sataroot=/dev/sda1 rootwait rw
script=boot.scr
splashpos=m,m
uimage=/boot/uImage
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx

Environment size: 2338/8188 bytes
UDOO board => version

U-Boot 2013.10-rc3 (Jan 20 2014 - 13:33:34)
arm-fsl-linux-gnueabi-gcc (4.4.4_09.06.2010) 4.4.4
GNU ld (GNU Binutils) 2.20.1.20100303
UDOO board =>