API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 30th, 2018
130
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.50 KB | None | 0 0
raw download clone embed print report
  1. unielec U7628-01 with my image , standard snapshot with enabled :
  2. initram image
  3. bootargs = "console=ttyS1,57600n8 root=/dev/mtdblock5 rootfstype=squashfs,jffs2";
  4. boot to ram
  5.  
  6. Automatic boot of image at addr 0x80A00000 ...
  7. ## Booting image at 80a00000 ...
  8. Image Name: MIPS OpenWrt Linux-4.14.70
  9. Image Type: MIPS Linux Kernel Image (lzma compressed)
  10. Data Size: 3519571 Bytes = 3.4 MB
  11. Load Address: 80000000
  12. Entry Point: 80000000
  13. Verifying Checksum ... OK
  14. Uncompressing Kernel Image ... OK
  15. No initrd
  16. ## Transferring control to Linux (at address 80000000) ...
  17. ## Giving linux memsize in MB, 64
  18.  
  19. Starting kernel ...
  20.  
  21. [ 0.000000] Linux version 4.14.70 (davidea@unielec) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8082-95b3f8e)) #0 Thu Sep 20 20:03:48 2018
  22. [ 0.000000] Board has DDR2
  23. [ 0.000000] Analog PMU set to hw control
  24. [ 0.000000] Digital PMU set to hw control
  25. [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
  26. [ 0.000000] bootconsole [early0] enabled
  27. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  28. [ 0.000000] MIPS: machine is UniElec U7628-01 (128M RAM/16M flash)
  29. [ 0.000000] Determined physical RAM map:
  30. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  31. [ 0.000000] Initrd not found or empty - disabling initrd
  32. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  33. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  34. [ 0.000000] Zone ranges:
  35. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  36. [ 0.000000] Movable zone start for each node
  37. [ 0.000000] Early memory node ranges
  38. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  39. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  40. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  41. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  42. [ 0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock5 rootfstype=squashfs,jffs2 rootfstype=squashfs,jffs2
  43. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  44. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  45. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  46. [ 0.000000] Writing ErrCtl register=0002ba20
  47. [ 0.000000] Readback ErrCtl register=0002ba20
  48. [ 0.000000] Memory: 122980K/131072K available (3576K kernel code, 168K rwdata, 836K rodata, 2068K init, 208K bss, 8092K reserved, 0K cma-reserved)
  49. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  50. [ 0.000000] NR_IRQS: 256
  51. [ 0.000000] intc: using register map from devicetree
  52. [ 0.000000] CPU Clock: 580MHz
  53. [ 0.000000] timer_probe: no matching timers found
  54. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  55. [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  56. [ 0.015369] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  57. [ 0.087583] pid_max: default: 32768 minimum: 301
  58. [ 0.096919] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  59. [ 0.109879] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  60. [ 0.129521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  61. [ 0.148899] futex hash table entries: 256 (order: -1, 3072 bytes)
  62. [ 0.160994] pinctrl core: initialized pinctrl subsystem
  63. [ 0.171764] NET: Registered protocol family 16
  64. [ 0.288543] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
  65. [ 0.449541] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
  66. [ 0.462683] mt7620-pci: probe of 10140000.pcie failed with error -1
  67. [ 0.491351] mt7621_gpio 10000600.gpio: registering 32 gpios
  68. [ 0.502576] mt7621_gpio 10000600.gpio: registering 32 gpios
  69. [ 0.513700] mt7621_gpio 10000600.gpio: registering 32 gpios
  70. [ 0.528851] clocksource: Switched to clocksource MIPS
  71. [ 0.539963] NET: Registered protocol family 2
  72. [ 0.549345] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  73. [ 0.563042] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  74. [ 0.575565] TCP: Hash tables configured (established 1024 bind 1024)
  75. [ 0.588271] UDP hash table entries: 256 (order: 0, 4096 bytes)
  76. [ 0.599735] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  77. [ 0.612360] NET: Registered protocol family 1
  78. [ 2.648858] random: fast init done
  79. [ 3.249444] Crashlog allocated RAM at address 0x3f00000
  80. [ 3.261155] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  81. [ 3.279511] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  82. [ 3.290955] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  83. [ 3.392108] io scheduler noop registered
  84. [ 3.399787] io scheduler deadline registered (default)
  85. [ 3.410679] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  86. [ 3.424338] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  87. [ 3.442675] cacheinfo: Failed to find cpu0 device node
  88. [ 3.452720] cacheinfo: Unable to detect cache hierarchy for CPU 0
  89. [ 3.465457] spi-mt7621 10000b00.spi: sys_freq: 193333333
  90. [ 3.480286] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  91. [ 3.490237] 4 fixed-partitions partitions found on MTD device spi0.0
  92. [ 3.502699] Creating 4 MTD partitions on "spi0.0":
  93. [ 3.512168] 0x000000000000-0x000000030000 : "bootloader"
  94. [ 3.523574] 0x000000030000-0x000000040000 : "config"
  95. [ 3.534148] 0x000000040000-0x000000050000 : "factory"
  96. [ 3.544900] 0x000000050000-0x000001000000 : "firmware"
  97. [ 3.618565] 2 uimage-fw partitions found on MTD device firmware
  98. [ 3.630171] 0x000000050000-0x000000185472 : "kernel"
  99. [ 3.640831] 0x000000185472-0x000001000000 : "rootfs"
  100. [ 3.651347] mtd: device 5 (rootfs) set to be root filesystem
  101. [ 3.663884] 1 squashfs-split partitions found on MTD device rootfs
  102. [ 3.676037] 0x000000470000-0x000001000000 : "rootfs_data"
  103. [ 3.688256] libphy: Fixed MDIO Bus: probed
  104. [ 3.706985] rt3050-esw 10110000.esw: link changed 0x00
  105. [ 3.718662] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  106. [ 3.736684] NET: Registered protocol family 10
  107. [ 3.749395] Segment Routing with IPv6
  108. [ 3.756603] NET: Registered protocol family 17
  109. [ 3.765374] 8021q: 802.1Q VLAN Support v1.8
  110. [ 3.775455] Warning: unable to open an initial console.
  111. [ 3.796958] Freeing unused kernel memory: 2068K
  112. [ 3.805788] This architecture does not have kernel memory protection.
  113. [ 3.833178] init: Console is alive
  114. [ 3.840186] init: - watchdog -
  115. [ 3.870841] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  116. [ 3.896039] usbcore: registered new interface driver usbfs
  117. [ 3.906915] usbcore: registered new interface driver hub
  118. [ 3.917419] usbcore: registered new device driver usb
  119. [ 3.933232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  120. [ 3.947849] ehci-platform: EHCI generic platform driver
  121. [ 3.968397] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
  122. [ 3.981521] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
  123. [ 3.991857] ehci-platform 101c0000.ehci: EHCI Host Controller
  124. [ 4.003234] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  125. [ 4.018979] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  126. [ 4.058895] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  127. [ 4.072166] hub 1-0:1.0: USB hub found
  128. [ 4.079916] hub 1-0:1.0: 1 port detected
  129. [ 4.091117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  130. [ 4.104866] ohci-platform: OHCI generic platform driver
  131. [ 4.115387] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  132. [ 4.128759] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  133. [ 4.144433] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  134. [ 4.223828] hub 2-0:1.0: USB hub found
  135. [ 4.231628] hub 2-0:1.0: 1 port detected
  136. [ 4.244967] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  137. [ 4.269666] init: - preinit -
  138. [ 4.307902] CPU 0 Unable to handle kernel paging request at virtual address 77f03664, epc == 800d7d14, ra == 800d7c94
  139. [ 4.328855] Oops[#1]:
  140. [ 4.333239] CPU: 0 PID: 309 Comm: sh Not tainted 4.14.70 #0
  141. [ 4.344243] task: 87dca100 task.stack: 87d0c000
  142. [ 4.353183] $ 0 : 00000000 ffffff84 00000001 00000020
  143. [ 4.363500] $ 4 : 00000000 80410000 80680000 000006df
  144. [ 4.373820] $ 8 : 77f03648 77f036c8 00000000 64000000
  145. [ 4.384140] $12 : 7fadcf70 00000000 00000000 77f452c0
  146. [ 4.394460] $16 : 77f03648 806b0000 87d06000 00000001
  147. [ 4.404780] $20 : 77f3b000 77f3b000 77f3b000 00000000
  148. [ 4.415100] $24 : 00000fa5 77eaa020
  149. [ 4.425420] $28 : 87d0c000 87d0dd80 00000000 800d7c94
  150. [ 4.435742] Hi : 00000007
  151. [ 4.441419] Lo : 00000019
  152. [ 4.447127] epc : 800d7d14 get_empty_filp+0xcc/0x144
  153. [ 4.457250] ra : 800d7c94 get_empty_filp+0x4c/0x144
  154. [ 4.467389] Status: 1100a403 KERNEL EXL IE
  155. [ 4.475647] Cause : 00800004 (ExcCode 01)
  156. [ 4.483559] BadVA : 77f03664
  157. [ 4.489236] PrId : 00019655 (MIPS 24KEc)
  158. [ 4.497145] Modules linked in: leds_gpio ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
  159. [ 4.521061] Process sh (pid: 309, threadinfo=87d0c000, task=87dca100, tls=77f46da8)
  160. [ 4.536189] Stack : 0c845880 87d0de38 87f07be8 00000000 87d0de38 87d0de38 87d0def4 800e4e90
  161. [ 4.552699] 87c0f010 00000000 00000004 0c845880 00000000 87837750 87c0f010 00000000
  162. [ 4.569211] 00000000 800f3524 00000055 8040c2c8 000001ff 87d0de98 00000000 000001ff
  163. [ 4.585723] 87d0de80 00000000 87f07be0 810ed180 87d0de98 80093104 00000000 800bc850
  164. [ 4.602235] 00000004 87d0de38 87d0def4 00000001 77f3b000 77f3b000 77f3b000 00000000
  165. [ 4.618747] ...
  166. [ 4.623566] Call Trace:
  167. [ 4.628388] [<800d7d14>] get_empty_filp+0xcc/0x144
  168. [ 4.637871] [<800e4e90>] path_openat+0x40/0x1128
  169. [ 4.646966] [<800e704c>] do_filp_open+0x70/0xd8
  170. [ 4.655912] [<800d3c90>] do_sys_open+0x19c/0x254
  171. [ 4.665034] [<80013f6c>] syscall_common+0x34/0x58
  172. [ 4.674309] Code: 24020001 3c068068 3c058041 <ae02001c> ae120054 24c60000 24a5f550 0c013764 26040028
  173. [ 4.693568]
  174. [ 4.696521] ---[ end trace d6d4369c9339267b ]---
  175. [ 4.707110] Kernel panic - not syncing: Fatal exception
  176. [ 4.718293] Rebooting in 1 seconds..
  177. [04040C09][04040C0B]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!