API tools faq
paste
Advertisement
olcayertas

Beagleboard XM Rev-A Serial console boot log

olcayertas
Oct 26th, 2011
222
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.91 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue May 10 10:06:15 CEST 2011
  2. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  3. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  4. [ 0.000000] Machine: OMAP3 Beagle Board
  5. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  6. [ 0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
  7. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
  8. [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
  9. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  10. [ 0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait omapfb.video_mode=1024x768MR-16@60
  11. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  12. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  13. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  14. [ 0.000000] Memory: 512MB = 512MB total
  15. [ 0.000000] Memory: 498304KB available (5900K code, 673K data, 204K init, 0K highmem)
  16. [ 0.000000] Hierarchical RCU implementation.
  17. [ 0.000000] NR_IRQS:402
  18. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  19. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  20. [ 0.000000] GPMC revision 5.0
  21. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  22. [ 0.000000] Total of 96 interrupts on 1 active controller
  23. [ 0.000000] OMAP GPIO hardware version 2.5
  24. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  25. [ 0.000000] Console: colour dummy device 80x30
  26. [ 0.000000] console [tty0] enabled
  27. [ 0.000000] Calibrating delay loop... 498.87 BogoMIPS (lpj=1945600)
  28. [ 0.000000] Mount-cache hash table entries: 512
  29. [ 0.000000] CPU: Testing write buffer coherency: ok
  30. [ 0.000000] tmpfs: No value for mount option 'mode'
  31. [ 0.000000] devtmpfs: initialized
  32. [ 0.000000] regulator: core version 0.5
  33. [ 0.000000] NET: Registered protocol family 16
  34. [ 0.000000] OMAP3 Beagle Rev: xM A
  35. [ 0.000000] Found NAND on CS0
  36. [ 0.000000] Registering NAND on CS0
  37. [ 0.000000] Unable to get DVI reset GPIO
  38. [ 0.000000] omap_init_mbox: platform not supported
  39. [ 9.683288] OMAP DMA hardware revision 5.0
  40. [ 9.689727] bio: create slab <bio-0> at 0
  41. [ 9.691009] SCSI subsystem initialized
  42. [ 9.692443] usbcore: registered new interface driver usbfs
  43. [ 9.692626] usbcore: registered new interface driver hub
  44. [ 9.692810] usbcore: registered new device driver usb
  45. [ 9.693206] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
  46. [ 9.695861] twl4030: PIH (irq 7) chaining IRQs 368..375
  47. [ 9.695922] twl4030: power (irq 373) chaining IRQs 376..383
  48. [ 9.696228] twl4030: gpio (irq 368) chaining IRQs 384..401
  49. [ 9.697967] regulator: VUSB1V5: 1500 mV normal standby
  50. [ 9.698211] regulator: VUSB1V8: 1800 mV normal standby
  51. [ 9.698516] regulator: VUSB3V1: 3100 mV normal standby
  52. [ 9.699798] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  53. [ 9.700195] regulator: VMMC1: 1850 <--> 3150 mV normal standby
  54. [ 9.700500] regulator: VDAC: 1800 mV normal standby
  55. [ 9.700744] regulator: VPLL2: 1800 mV normal standby
  56. [ 9.701019] regulator: VSIM: 1800 <--> 3000 mV normal standby
  57. [ 9.701354] regulator: VAUX3: 1800 mV normal standby
  58. [ 9.701721] regulator: VAUX4: 1800 mV normal standby
  59. [ 9.701934] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  60. [ 9.711273] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
  61. [ 9.712493] Switching to clocksource 32k_counter
  62. [ 9.721710] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  63. [ 9.725433] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  64. [ 9.725463] musb_hdrc musb_hdrc: MUSB HDRC host driver
  65. [ 9.725616] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
  66. [ 9.725799] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  67. [ 9.725830] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  68. [ 9.725891] usb usb1: Product: MUSB HDRC host driver
  69. [ 9.725921] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
  70. [ 9.725952] usb usb1: SerialNumber: musb_hdrc
  71. [ 9.726593] hub 1-0:1.0: USB hub found
  72. [ 9.726654] hub 1-0:1.0: 1 port detected
  73. [ 9.727722] NET: Registered protocol family 2
  74. [ 9.727996] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  75. [ 9.728637] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  76. [ 9.729064] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  77. [ 9.729278] TCP: Hash tables configured (established 16384 bind 16384)
  78. [ 9.729339] TCP reno registered
  79. [ 9.729370] UDP hash table entries: 256 (order: 0, 4096 bytes)
  80. [ 9.729400] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  81. [ 9.729675] NET: Registered protocol family 1
  82. [ 9.730133] RPC: Registered udp transport module.
  83. [ 9.730163] RPC: Registered tcp transport module.
  84. [ 9.730194] RPC: Registered tcp NFSv4.1 backchannel transport module.
  85. [ 9.731109] omap-iommu omap-iommu.0: isp registered
  86. [ 9.732849] VFS: Disk quotas dquot_6.5.2
  87. [ 9.732971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  88. [ 9.734069] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  89. [ 9.734924] JFFS2 version 2.2. (NAND) (SUMMARY) �ᠩ 2001-2006 Red Hat, Inc.
  90. [ 9.735778] msgmni has been set to 973
  91. [ 9.739562] alg: No test for stdrng (krng)
  92. [ 9.739898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  93. [ 9.739959] io scheduler noop registered
  94. [ 9.739990] io scheduler deadline registered
  95. [ 9.740142] io scheduler cfq registered (default)
  96. [ 9.798675] OMAP DSS rev 2.0
  97. [ 9.798767] OMAP DISPC rev 3.0
  98. [ 9.798828] OMAP VENC rev 2
  99. [ 9.799072] OMAP DSI rev 1.0
  100. [ 10.135589] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  101. [ 10.153472] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
  102. [ 10.170715] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
  103. [ 10.187866] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
  104. [ 10.740783] console [ttyS2] enabled
  105. [ 10.751007] brd: module loaded
  106. [ 10.757385] loop: module loaded
  107. [ 10.761840] omap2-nand driver initializing
  108. [ 10.766296] NAND device: Manufacturer ID: 0x20, Chip ID: 0xba (ST Micro NAND 256MiB 1,8V 16-bit)
  109. [ 10.775665] cmdlinepart partition parsing not available
  110. [ 10.780944] Creating 5 MTD partitions on "omap2-nand":
  111. [ 10.786193] 0x000000000000-0x000000080000 : "X-Loader"
  112. [ 10.792541] 0x000000080000-0x000000260000 : "U-Boot"
  113. [ 10.799041] 0x000000260000-0x000000280000 : "U-Boot Env"
  114. [ 10.805114] 0x000000280000-0x000000680000 : "Kernel"
  115. [ 10.812225] 0x000000680000-0x000010000000 : "File System"
  116. [ 10.906799] usbcore: registered new interface driver catc
  117. [ 10.912292] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  118. [ 10.918395] usbcore: registered new interface driver kaweth
  119. [ 10.924041] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  120. [ 10.931732] usbcore: registered new interface driver pegasus
  121. [ 10.937438] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  122. [ 10.944458] usbcore: registered new interface driver rtl8150
  123. [ 10.950286] usbcore: registered new interface driver asix
  124. [ 10.955841] usbcore: registered new interface driver cdc_ether
  125. [ 10.961822] usbcore: registered new interface driver dm9601
  126. [ 10.967559] usbcore: registered new interface driver smsc95xx
  127. [ 10.973480] usbcore: registered new interface driver gl620a
  128. [ 10.979217] usbcore: registered new interface driver net1080
  129. [ 10.984985] usbcore: registered new interface driver plusb
  130. [ 10.990661] usbcore: registered new interface driver rndis_host
  131. [ 10.996734] usbcore: registered new interface driver cdc_subset
  132. [ 11.002807] usbcore: registered new interface driver zaurus
  133. [ 11.008514] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  134. [ 11.016632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  135. [ 11.023498] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  136. [ 11.029510] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
  137. [ 11.037170] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  138. [ 11.056365] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  139. [ 11.062286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  140. [ 11.069183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  141. [ 11.076507] usb usb2: Product: OMAP-EHCI Host Controller
  142. [ 11.081909] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
  143. [ 11.087371] usb usb2: SerialNumber: ehci-omap.0
  144. [ 11.092620] hub 2-0:1.0: USB hub found
  145. [ 11.096496] hub 2-0:1.0: 3 ports detected
  146. [ 11.126800] Initializing USB Mass Storage driver...
  147. [ 11.131927] usbcore: registered new interface driver usb-storage
  148. [ 11.138031] USB Mass Storage support registered.
  149. [ 11.143066] mice: PS/2 mouse device common for all mice
  150. [ 11.148712] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  151. [ 11.156555] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
  152. [ 11.167297] i2c /dev entries driver
  153. [ 11.171417] Linux video capture interface: v2.00
  154. [ 11.176391] omap-iommu omap-iommu.0: isp: version 1.1
  155. [ 11.183074] vpfe_init
  156. [ 11.185943] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  157. [ 11.192749] cpuidle: using governor ladder
  158. [ 11.196960] cpuidle: using governor menu
  159. [ 11.306671] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
  160. [ 11.313751] Registered led device: beagleboard::usr0
  161. [ 11.318939] Registered led device: beagleboard::usr1
  162. [ 11.325439] Registered led device: beagleboard::pmu_stat
  163. [ 11.332489] usbcore: registered new interface driver usbhid
  164. [ 11.338195] usbhid: USB HID core driver
  165. [ 11.342224] Advanced Linux Sound Architecture Driver Version 1.0.21.
  166. [ 11.349182] usbcore: registered new interface driver snd-usb-audio
  167. [ 11.423583] usb 2-2: new high speed USB device using ehci-omap and address 2
  168. [ 11.434844] No device for DAI omap-mcbsp-dai-0
  169. [ 11.439392] No device for DAI omap-mcbsp-dai-1
  170. [ 11.443878] No device for DAI omap-mcbsp-dai-2
  171. [ 11.448394] No device for DAI omap-mcbsp-dai-3
  172. [ 11.452880] No device for DAI omap-mcbsp-dai-4
  173. [ 11.457397] OMAP3 Beagle SoC init
  174. [ 11.461578] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
  175. [ 11.473236] ALSA device list:
  176. [ 11.476257] #0: omap3beagle (twl4030)
  177. [ 11.480255] oprofile: using arm/armv7
  178. [ 11.484191] TCP cubic registered
  179. [ 11.487518] NET: Registered protocol family 17
  180. [ 11.492034] NET: Registered protocol family 15
  181. [ 11.496673] lib80211: common routines for IEEE802.11 drivers
  182. [ 11.502441] ThumbEE CPU extension supported.
  183. [ 11.506774] Power Management for TI OMAP3.
  184. [ 11.512207] SmartReflex driver initialized
  185. [ 11.516510] omap3beaglelmb: Driver registration complete
  186. [ 11.530456] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  187. [ 11.538787] registered taskstats version 1
  188. [ 11.556243] Console: switching to colour frame buffer device 80x30
  189. [ 11.576599] regulator_init_complete: incomplete constraints, leaving VAUX3 on
  190. [ 11.586273] regulator_init_complete: incomplete constraints, leaving VDAC on
  191. [ 11.596160] omap_vout omap_vout: probed for an unknown device
  192. [ 11.604339] Waiting for root device /dev/mmcblk0p2...
  193. [ 11.614562] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
  194. [ 11.623474] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  195. [ 11.633483] hub 2-2:1.0: USB hub found
  196. [ 11.639770] hub 2-2:1.0: 5 ports detected
  197. [ 11.744079] mmc0: host does not support reading read-only switch. assuming write-enable.
  198. [ 11.756835] mmc0: new high speed SDHC card at address 1234
  199. [ 11.765167] mmcblk0: mmc0:1234 SA04G 3.67 GiB
  200. [ 11.772460] mmcblk0: p1 p2
  201. [ 11.955261] usb 2-2.1: new high speed USB device using ehci-omap and address 3
  202. [ 12.080627] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
  203. [ 12.090240] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  204. [ 12.105743] smsc95xx v1.0.4
  205. [ 12.173187] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, ea:4a:7e:1c:fb:8d
  206. [ 12.275360] usb 2-2.2: new full speed USB device using ehci-omap and address 4
  207. [ 12.405731] usb 2-2.2: New USB device found, idVendor=045e, idProduct=074f
  208. [ 12.415496] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  209. [ 12.428314] usb 2-2.2: Product: Microsoft�® 2.4GHz Transceiver v5.0
  210. [ 12.437530] usb 2-2.2: Manufacturer: Microsoft
  211. [ 12.454437] input: Microsoft Microsoft�® 2.4GHz Transceiver v5.0 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
  212. [ 12.472869] generic-usb 0003:045E:074F.0001: input: USB HID v1.11 Mouse [Microsoft Microsoft�® 2.4GHz Transceiver v5.0] on usb-ehci-omap.0-2.2/input0
  213. [ 12.572387] usb 2-2.3: new low speed USB device using ehci-omap and address 5
  214. [ 12.702728] usb 2-2.3: New USB device found, idVendor=0603, idProduct=00f2
  215. [ 12.712799] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  216. [ 12.726135] usb 2-2.3: Product: USB Keyboard
  217. [ 12.733428] usb 2-2.3: Manufacturer: NOVATEK
  218. [ 12.745605] input: NOVATEK USB Keyboard as /devices/platform/ehci-omap.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input3
  219. [ 12.762084] generic-usb 0003:0603:00F2.0002: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-ehci-omap.0-2.3/input0
  220. [ 12.787078] input: NOVATEK USB Keyboard as /devices/platform/ehci-omap.0/usb2/2-2/2-2.3/2-2.3:1.1/input/input4
  221. [ 12.803771] generic-usb 0003:0603:00F2.0003: input: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-ehci-omap.0-2.3/input1
  222. [ 21.973175] kjournald starting. Commit interval 5 seconds
  223. [ 22.645324] EXT3-fs (mmcblk0p2): using internal journal
  224. [ 22.653808] EXT3-fs (mmcblk0p2): recovery complete
  225. [ 22.670196] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  226. [ 22.680511] VFS: Mounted root (ext3 filesystem) on device 179:2.
  227. [ 22.695465] devtmpfs: mounted
  228. [ 22.701538] Freeing init memory: 204K
  229. [ 23.614166] udev: starting version 151
  230. [ 35.400085] Bluetooth: Core ver 2.15
  231. [ 35.415740] NET: Registered protocol family 31
  232. [ 35.429718] Bluetooth: HCI device and connection manager initialized
  233. [ 35.444458] quiet_error: 47 callbacks suppressed
  234. [ 35.451629] Bluetooth: HCI socket layer initialized
  235. [ 35.490417] Bluetooth: L2CAP ver 2.14
  236. [ 35.513580] Bluetooth: L2CAP socket layer initialized
  237. [ 35.594909] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  238. [ 35.863952] NET: Registered protocol family 10
  239. [ 35.931854] Bluetooth: RFCOMM TTY layer initialized
  240. [ 35.939971] Bluetooth: RFCOMM socket layer initialized
  241. [ 35.948211] Bluetooth: RFCOMM ver 1.11
  242. [ 41.419982] usb0: link up, 100Mbps, full-duplex, lpa 0x41E1
  243.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!