API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 25th, 2017
193
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.71 KB | None | 0 0
raw download clone embed print report
  1. --- TLP 0.9.903+git-master-20170425 --------------------------------------------
  2.  
  3. +++ Configured Settings: /etc/tlp.conf
  4. TLP_ENABLE=1
  5. TLP_DEFAULT_MODE=AC
  6. TLP_PERSISTENT_DEFAULT=0
  7. DISK_IDLE_SECS_ON_AC=0
  8. DISK_IDLE_SECS_ON_BAT=2
  9. MAX_LOST_WORK_SECS_ON_AC=15
  10. MAX_LOST_WORK_SECS_ON_BAT=60
  11. CPU_HWP_ON_AC=balance_performance
  12. CPU_HWP_ON_BAT=balance_power
  13. SCHED_POWERSAVE_ON_AC=0
  14. SCHED_POWERSAVE_ON_BAT=1
  15. NMI_WATCHDOG=0
  16. ENERGY_PERF_POLICY_ON_AC=performance
  17. ENERGY_PERF_POLICY_ON_BAT=powersave
  18. DISK_DEVICES="sda sdb"
  19. DISK_APM_LEVEL_ON_AC="254 254"
  20. DISK_APM_LEVEL_ON_BAT="128 128"
  21. SATA_LINKPWR_ON_AC=max_performance
  22. SATA_LINKPWR_ON_BAT=min_power
  23. AHCI_RUNTIME_PM_TIMEOUT=15
  24. PCIE_ASPM_ON_AC=performance
  25. PCIE_ASPM_ON_BAT=powersave
  26. RADEON_POWER_PROFILE_ON_AC=high
  27. RADEON_POWER_PROFILE_ON_BAT=low
  28. RADEON_DPM_STATE_ON_AC=performance
  29. RADEON_DPM_STATE_ON_BAT=battery
  30. RADEON_DPM_PERF_LEVEL_ON_AC=auto
  31. RADEON_DPM_PERF_LEVEL_ON_BAT=auto
  32. WIFI_PWR_ON_AC=off
  33. WIFI_PWR_ON_BAT=on
  34. WOL_DISABLE=Y
  35. SOUND_POWER_SAVE_ON_AC=0
  36. SOUND_POWER_SAVE_ON_BAT=1
  37. SOUND_POWER_SAVE_CONTROLLER=Y
  38. BAY_POWEROFF_ON_AC=0
  39. BAY_POWEROFF_ON_BAT=0
  40. BAY_DEVICE="sr0"
  41. RUNTIME_PM_ON_AC=on
  42. RUNTIME_PM_ON_BAT=auto
  43. USB_AUTOSUSPEND=1
  44. USB_BLACKLIST_BTUSB=0
  45. USB_BLACKLIST_PHONE=0
  46. USB_BLACKLIST_WWAN=1
  47. RESTORE_DEVICE_STATE_ON_STARTUP=1
  48. START_CHARGE_THRESH_BAT0=90
  49. DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi"
  50. DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi"
  51. DEVICES_TO_DISABLE_ON_DOCK="wifi"
  52. DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
  53. TLP_LOAD_MODULES=y
  54.  
  55. +++ System Info
  56. System = LENOVO ThinkPad T460p 20FWCTO1WW
  57. BIOS = R07ET72W (2.12 )
  58. Release = "Gentoo Base System release 2.3"
  59. Kernel = 4.10.8-gentoo #1 SMP Mon Apr 3 20:12:32 CEST 2017 x86_64
  60. /proc/cmdline = root=/dev/sda4 rw BOOT_IMAGE=/vmlinuz-4.10.8-gentoo root=PARTUUID=522c669d-01d2-410d-bd90-0cd5226917a0 ro resume=/dev/sda3 rootfstype=ext4
  61. Init system = openrc
  62. Boot mode = UEFI
  63.  
  64. +++ TLP Status
  65. State = enabled
  66. Last run = 17:34:15, 59 sec(s) ago
  67. Mode = AC
  68. Power source = AC
  69.  
  70. +++ Processor
  71. CPU model = Intel(R) Core(TM) i5-6440HQ CPU @ 2.60GHz
  72.  
  73. /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate
  74. /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave
  75. /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave
  76. /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 800000 [kHz]
  77. /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 3500000 [kHz]
  78. /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference = balance_performance
  79. /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
  80.  
  81. /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = intel_pstate
  82. /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = powersave
  83. /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors = performance powersave
  84. /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 800000 [kHz]
  85. /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 3500000 [kHz]
  86. /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference = balance_performance
  87. /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
  88.  
  89. /sys/devices/system/cpu/cpu2/cpufreq/scaling_driver = intel_pstate
  90. /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = powersave
  91. /sys/devices/system/cpu/cpu2/cpufreq/scaling_available_governors = performance powersave
  92. /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq = 800000 [kHz]
  93. /sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq = 3500000 [kHz]
  94. /sys/devices/system/cpu/cpu2/cpufreq/energy_performance_preference = balance_performance
  95. /sys/devices/system/cpu/cpu2/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
  96.  
  97. /sys/devices/system/cpu/cpu3/cpufreq/scaling_driver = intel_pstate
  98. /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = powersave
  99. /sys/devices/system/cpu/cpu3/cpufreq/scaling_available_governors = performance powersave
  100. /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq = 800000 [kHz]
  101. /sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq = 3500000 [kHz]
  102. /sys/devices/system/cpu/cpu3/cpufreq/energy_performance_preference = balance_performance
  103. /sys/devices/system/cpu/cpu3/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power
  104.  
  105. /sys/devices/system/cpu/intel_pstate/min_perf_pct = 23 [%]
  106. /sys/devices/system/cpu/intel_pstate/max_perf_pct = 100 [%]
  107. /sys/devices/system/cpu/intel_pstate/no_turbo = 0
  108. /sys/devices/system/cpu/intel_pstate/turbo_pct = 36 [%]
  109. /sys/devices/system/cpu/intel_pstate/num_pstates = 28
  110.  
  111. x86_energy_perf_policy.cpu0 = performance
  112. x86_energy_perf_policy.cpu1 = performance
  113. x86_energy_perf_policy.cpu2 = performance
  114. x86_energy_perf_policy.cpu3 = performance
  115.  
  116. /sys/module/workqueue/parameters/power_efficient = N
  117. /proc/sys/kernel/nmi_watchdog = (not available)
  118.  
  119. +++ Undervolting
  120. PHC kernel not available.
  121.  
  122. +++ Temperatures
  123. CPU temp = 47 [°C]
  124. /proc/acpi/ibm/fan = 2063 [/min]
  125.  
  126. +++ File System
  127. /proc/sys/vm/laptop_mode = 0
  128. /proc/sys/vm/dirty_writeback_centisecs = 1500
  129. /proc/sys/vm/dirty_expire_centisecs = 1500
  130. /proc/sys/vm/dirty_ratio = 20
  131. /proc/sys/vm/dirty_background_ratio = 10
  132.  
  133. +++ Storage Devices
  134. /dev/sda:
  135. Model = Samsung SSD 850 EVO 1TB
  136. Firmware = EMT02B6Q
  137. APM Level = none/disabled
  138. Status = active/idle
  139. TRIM = supported
  140. Scheduler = noop
  141.  
  142. Runtime PM: control = on, autosuspend_delay = -1
  143.  
  144. SMART info:
  145. 5 Reallocated_Sector_Ct = 0
  146. 9 Power_On_Hours = 3365 [h]
  147. 12 Power_Cycle_Count = 630
  148. 177 Wear_Leveling_Count = 99 [%]
  149. 179 Used_Rsvd_Blk_Cnt_Tot = 0
  150. 190 Airflow_Temperature_Cel = 43 [°C]
  151. 241 Total_LBAs_Written = 4.837 [TB]
  152.  
  153.  
  154. +++ SATA Aggressive Link Power Management
  155. /sys/class/scsi_host/host0/link_power_management_policy = max_performance
  156. /sys/class/scsi_host/host1/link_power_management_policy = max_performance
  157. /sys/class/scsi_host/host2/link_power_management_policy = max_performance
  158. /sys/class/scsi_host/host3/link_power_management_policy = max_performance
  159.  
  160. +++ AHCI Host Controller Runtime Power Management
  161. /sys/bus/pci/devices/0000:00:17.0/ata1/power/control = on
  162. /sys/bus/pci/devices/0000:00:17.0/ata2/power/control = on
  163. /sys/bus/pci/devices/0000:00:17.0/ata3/power/control = on
  164. /sys/bus/pci/devices/0000:00:17.0/ata4/power/control = on
  165.  
  166. +++ PCIe Active State Power Management
  167. /sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
  168.  
  169. +++ Intel Graphics
  170. /sys/module/i915/parameters/enable_rc6 = 1 (enabled)
  171. /sys/module/i915/parameters/enable_dc = -1 (use per-chip default)
  172. /sys/module/i915/parameters/enable_fbc = 0 (disabled)
  173. /sys/module/i915/parameters/enable_psr = 0 (disabled)
  174. /sys/module/i915/parameters/modeset = -1 (use per-chip default)
  175. /sys/module/i915/parameters/semaphores = 0 (disabled)
  176.  
  177. +++ Wireless
  178. bluetooth = on
  179. wifi = off (software)
  180. wwan = none (no device)
  181.  
  182. hci0(btusb) : bluetooth, not connected
  183. wlp3s0(iwlwifi) : wifi, not connected, power management = off
  184.  
  185. +++ Audio
  186. /sys/module/snd_hda_intel/parameters/power_save = 0
  187. /sys/module/snd_hda_intel/parameters/power_save_controller = N
  188. /sys/module/snd_ac97_codec/parameters/power_save = 0
  189.  
  190. +++ Runtime Power Management
  191. Device blacklist = (not configured)
  192. Driver blacklist = amdgpu nouveau nvidia radeon (default)
  193.  
  194. /sys/bus/pci/devices/0000:00:00.0/power/control = on (0x060000, Host bridge, skl_uncore)
  195. /sys/bus/pci/devices/0000:00:02.0/power/control = on (0x030000, VGA compatible controller, i915)
  196. /sys/bus/pci/devices/0000:00:14.0/power/control = on (0x0c0330, USB controller, xhci_hcd)
  197. /sys/bus/pci/devices/0000:00:14.2/power/control = on (0x118000, Signal processing controller, no driver)
  198. /sys/bus/pci/devices/0000:00:16.0/power/control = on (0x078000, Communication controller, mei_me)
  199. /sys/bus/pci/devices/0000:00:17.0/power/control = on (0x010601, SATA controller, ahci)
  200. /sys/bus/pci/devices/0000:00:1c.0/power/control = on (0x060400, PCI bridge, pcieport)
  201. /sys/bus/pci/devices/0000:00:1c.4/power/control = on (0x060400, PCI bridge, pcieport)
  202. /sys/bus/pci/devices/0000:00:1f.0/power/control = on (0x060100, ISA bridge, no driver)
  203. /sys/bus/pci/devices/0000:00:1f.2/power/control = on (0x058000, Memory controller, no driver)
  204. /sys/bus/pci/devices/0000:00:1f.3/power/control = on (0x040300, Audio device, snd_hda_intel)
  205. /sys/bus/pci/devices/0000:00:1f.4/power/control = on (0x0c0500, SMBus, i801_smbus)
  206. /sys/bus/pci/devices/0000:00:1f.6/power/control = on (0x020000, Ethernet controller, e1000e)
  207. /sys/bus/pci/devices/0000:03:00.0/power/control = on (0x028000, Network controller, iwlwifi)
  208. /sys/bus/pci/devices/0000:04:00.0/power/control = on (0xff0000, Unassigned class [ff00], rtsx_pci)
  209.  
  210. +++ USB
  211. Autosuspend = enabled
  212. Device whitelist = (not configured)
  213. Device blacklist = (not configured)
  214. Bluetooth blacklist = disabled
  215. Phone blacklist = disabled
  216. WWAN blacklist = enabled
  217.  
  218. Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub)
  219. Bus 001 Device 003 ID 04f2:b541 control = auto, autosuspend_delay_ms = 2000 -- Chicony Electronics Co., Ltd (uvcvideo)
  220. Bus 001 Device 002 ID 8087:0a2b control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. (btusb)
  221. Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
  222.  
  223. +++ ThinkPad Battery Features
  224. tp-smapi = inactive (unsupported hardware)
  225. tpacpi-bat = active
  226.  
  227. +++ ThinkPad Battery Status: BAT0 (Main / Internal)
  228. /sys/class/power_supply/BAT0/manufacturer = SANYO
  229. /sys/class/power_supply/BAT0/model_name = 45N1775
  230. /sys/class/power_supply/BAT0/cycle_count = (not supported)
  231. /sys/class/power_supply/BAT0/energy_full_design = 23200 [mWh]
  232. /sys/class/power_supply/BAT0/energy_full = 21080 [mWh]
  233. /sys/class/power_supply/BAT0/energy_now = 21080 [mWh]
  234. /sys/class/power_supply/BAT0/power_now = 0 [mW]
  235. /sys/class/power_supply/BAT0/status = Full
  236.  
  237. tpacpi-bat.BAT0.startThreshold = 90 [%]
  238. tpacpi-bat.BAT0.stopThreshold = 100 [%]
  239. tpacpi-bat.BAT0.forceDischarge = 0
  240.  
  241. Charge = 100.0 [%]
  242. Capacity = 90.9 [%]
  243.  
  244. +++ Battery Status
  245. /sys/class/power_supply/hid-dc:2c:26:e9:d2:63-battery/manufacturer = (not available)
  246. /sys/class/power_supply/hid-dc:2c:26:e9:d2:63-battery/model_name = Bluetooth 3.0 Mouse
  247. /sys/class/power_supply/hid-dc:2c:26:e9:d2:63-battery/cycle_count = (not supported)
  248. /sys/class/power_supply/hid-dc:2c:26:e9:d2:63-battery/status = Discharging
  249.  
  250. tpacpi-bat.hid-dc:2c:26:e9:d2:63-battery.startThreshold = (not available)
  251. tpacpi-bat.hid-dc:2c:26:e9:d2:63-battery.stopThreshold = (not available)
  252. tpacpi-bat.hid-dc:2c:26:e9:d2:63-battery.forceDischarge = (not available)
  253.  
  254. +++ Charge total = 100.0 [%]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!