SHARE
TWEET

Hikey960 boot log 2

a guest Sep 12th, 2019 3 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. √£hikey960 boarid:5301 xloader use UART6
  2. scsysstat_value[0].
  3. clear reset source
  4. last_keypoint0,reboot_type0
  5. secdbg not DCU.
  6. SecDbgVer exit
  7.  
  8.  xloader chipid is: 0x36600110, start at 560ms.
  9. Build Date: Dec  6 2017, 15:31:59
  10. [clock_init] ++
  11. hikey960 [hikey960_clk_init]
  12. hi3660 [clk_setup]
  13. [clock_init] --
  14. storage type is UFS
  15. ufs retry: 6 count v_tx:0 v_rx:0
  16. ufs set v_tx:0 v_rx:0
  17. Hikey960[5301] no need avs_init.
  18. ddr ft:0xf20332a3,mode:1 target:4
  19. UceLdOk
  20. ch 0 gt_errfail, STATUS:0x00000060
  21. ch 0 gdst_errfail, STATUS:0x00000040
  22. ch 1 gt_errfail, STATUS:0x00000060
  23. ch 1 gdst_errfail, STATUS:0x00000040
  24. ch 2 gt_errfail, STATUS:0x00000060
  25. ch 2 gdst_errfail, STATUS:0x00000040
  26. ch 3 gt_errfail, STATUS:0x00000060
  27. ch 3 gdst_errfail, STATUS:0x00000040
  28. timeout
  29. timeout
  30. timeout
  31. timeout
  32. density: 0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000,0x0c0c0c0c,0x00000000
  33. ddr info 0x00000306
  34. 400M
  35. 685M
  36. 1067M
  37. C0R,V0x0000002d e:113
  38. C1R,V0x0000002b e:113
  39. C0R,V0x0000002e e:66
  40. C1R,V0x0000002c e:66
  41. C3R,V0x0000002d e:66
  42. C0R,V0x0000002f e:66
  43. C1R,V0x0000002d e:66
  44. C2R,V0x0000002e e:66
  45. C3R,V0x0000002e e:66
  46. C0R,V0x00000030 e:66
  47. C1R,V0x0000002e e:66
  48. C2R,V0x0000002f e:66
  49. C3R,V0x0000002f e:66
  50. C0R,V0x00000031 e:65
  51. C1R,V0x0000002f e:66
  52. C2R,V0x00000030 e:66
  53. C3R,V0x00000030 e:66
  54. 1244M
  55. 1866M
  56. C1R,V0x00000016 e:66
  57. C0R,V0x00000017 e:66
  58. C1R,V0x00000017 e:66
  59. C3R,V0x00000017 e:66
  60. iomcu_subsys_init
  61. boot_c0 PROFILE 4
  62. NOTICE:  BL2: v2.1(release):v2.1-190-g482fc9c8
  63. NOTICE:  BL2: Built : 00:59:51, May 17 2019
  64. NOTICE:  BL2: Booting BL31
  65. NOTICE:  BL31: v2.1(release):v2.1-190-g482fc9c8
  66. NOTICE:  BL31: Built : 00:59:51, May 17 2019
  67. I/TC:  
  68. I/TC:  OP-TEE version: 3.0.0 #1 Fri May 17 00:59:49 UTC 2019 aarch64
  69. I/TC:  Initialized
  70. UEFI firmware (version Alpha built at 00:59:22 on May 17 2019)
  71. 3h3h3h3hPress ESCAPE for boot options .GNU GRUB  version 2.02~beta3-5+deb9u1
  72.  
  73. /----------------------------------------------------------------------------\||||||||||||||||||||||||\----------------------------------------------------------------------------/     Use the ^ and v keys to select which entry is highlighted.          
  74.       Press enter to boot the selected OS, `e' to edit the commands      
  75.       before booting or `c' for a command-line. ESC to return previous    
  76.       menu.                                                                
  77. *Debian 9.0 (Stretch)                                                        Fastboot                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  78.    The highlighted entry will be executed automatically in 10s.                   The highlighted entry will be executed automatically in 9s.                    The highlighted entry will be executed automatically in 8s.                    The highlighted entry will be executed automatically in 7s.                    The highlighted entry will be executed automatically in 6s.                    The highlighted entry will be executed automatically in 5s.                    The highlighted entry will be executed automatically in 4s.                    The highlighted entry will be executed automatically in 3s.                    The highlighted entry will be executed automatically in 2s.                    The highlighted entry will be executed automatically in 1s.                    The highlighted entry will be executed automatically in 0s.                 EFI stub: Booting Linux Kernel...
  79. EFI stub: Using DTB from configuration table
  80. EFI stub: Exiting boot services and installing virtual address map...
  81. I/TC:  Dynamic shared memory is enabled
  82. [    0.000000] Booting Linux on physical CPU 0x0
  83. [    0.000000] Linux version 4.14.0-rc7-linaro-hikey960+ (bas@hikey960) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #8 SMP PREEMPT Thu Mar 8 11:34:37 UTC 2018
  84. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  85. [    0.000000] Machine model: HiKey960
  86. [    0.000000] efi: Getting EFI parameters from FDT:
  87. [    0.000000] efi: EFI v2.60 by EDK II
  88. [    0.000000] efi:  MEMATTR=0xbe9f4418
  89. [    0.000000] cma: Reserved 16 MiB at 0x00000000bd400000
  90. [    0.000000] NUMA: No NUMA configuration found
  91. [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
  92. [    0.000000] NUMA: NODE_DATA [mem 0xbffa8f00-0xbffaa9ff]
  93. [    0.000000] Zone ranges:
  94. [    0.000000]   DMA      [mem 0x0000000000000000-0x00000000bfffffff]
  95. [    0.000000]   Normal   empty
  96. [    0.000000] Movable zone start for each node
  97. [    0.000000] Early memory node ranges
  98. [    0.000000]   node   0: [mem 0x0000000000000000-0x000000001abfffff]
  99. [    0.000000]   node   0: [mem 0x000000001ad88000-0x0000000031ffffff]
  100. [    0.000000]   node   0: [mem 0x0000000032101000-0x000000003dffffff]
  101. [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000089b7ffff]
  102. [    0.000000]   node   0: [mem 0x0000000089cc0000-0x00000000ba64ffff]
  103. [    0.000000]   node   0: [mem 0x00000000ba650000-0x00000000ba88ffff]
  104. [    0.000000]   node   0: [mem 0x00000000ba890000-0x00000000ba897fff]
  105. [    0.000000]   node   0: [mem 0x00000000ba898000-0x00000000ba89bfff]
  106. [    0.000000]   node   0: [mem 0x00000000ba89c000-0x00000000bf85ffff]
  107. [    0.000000]   node   0: [mem 0x00000000bf860000-0x00000000bf89ffff]
  108. [    0.000000]   node   0: [mem 0x00000000bf8a0000-0x00000000bf8affff]
  109. [    0.000000]   node   0: [mem 0x00000000bf8b0000-0x00000000bf8fffff]
  110. [    0.000000]   node   0: [mem 0x00000000bf900000-0x00000000bfffffff]
  111. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
  112. [    0.000000] psci: probing for conduit method from DT.
  113. [    0.000000] psci: PSCIv1.1 detected in firmware.
  114. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  115. [    0.000000] psci: Trusted OS migration not required
  116. [    0.000000] random: fast init done
  117. [    0.000000] percpu: Embedded 23 pages/cpu @ffff8000bfeed000 s55448 r8192 d30568 u94208
  118. [    0.000000] Detected VIPT I-cache on CPU0
  119. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  120. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 764983
  121. [    0.000000] Policy zone: DMA
  122. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/Image console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd10 rootwait rw efi=noruntime
  123. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  124. [    0.000000] Memory: 3019728K/3109084K available (10236K kernel code, 1180K rwdata, 4684K rodata, 1152K init, 405K bss, 72972K reserved, 16384K cma-reserved)
  125. [    0.000000] Virtual kernel memory layout:
  126. [    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
  127. [    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
  128. [    0.000000]       .text : 0xffff000008080000 - 0xffff000008a80000   ( 10240 KB)
  129. [    0.000000]     .rodata : 0xffff000008a80000 - 0xffff000008f20000   (  4736 KB)
  130. [    0.000000]       .init : 0xffff000008f20000 - 0xffff000009040000   (  1152 KB)
  131. [    0.000000]       .data : 0xffff000009040000 - 0xffff000009167200   (  1181 KB)
  132. [    0.000000]        .bss : 0xffff000009167200 - 0xffff0000091cc960   (   406 KB)
  133. [    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
  134. [    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
  135. [    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
  136. [    0.000000]               0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
  137. [    0.000000]     memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
  138. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  139. [    0.000000] Preemptible hierarchical RCU implementation.
  140. [    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  141. [    0.000000]  Tasks RCU enabled.
  142. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  143. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  144. [    0.000000] GIC: Using split EOI/Deactivate mode
  145. [    0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
  146. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  147. [    0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  148. [    0.000098] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  149. [    0.000594] Console: colour dummy device 80x25
  150. [    0.000976] console [tty0] enabled
  151. [    0.001062] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  152. [    0.001078] pid_max: default: 32768 minimum: 301
  153. [    0.001149] Security Framework initialized
  154. [    0.002399] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  155. [    0.002997] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  156. [    0.003036] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  157. [    0.003061] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  158. [    0.020074] ASID allocator initialised with 65536 entries
  159. [    0.028052] Hierarchical SRCU implementation.
  160. [    0.037250] EFI runtime services will be disabled.
  161. [    0.044081] smp: Bringing up secondary CPUs ...
  162. [    0.072465] Detected VIPT I-cache on CPU1
  163. [    0.072557] CPU1: Booted secondary processor [410fd034]
  164. [    0.100425] Detected VIPT I-cache on CPU2
  165. [    0.100449] CPU2: Booted secondary processor [410fd034]
  166. [    0.128444] Detected VIPT I-cache on CPU3
  167. [    0.128461] CPU3: Booted secondary processor [410fd034]
  168. [    0.158014] CPU features: enabling workaround for ARM erratum 858921
  169. [    0.158043] Detected VIPT I-cache on CPU4
  170. [    0.158049] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  171. [    0.158056] CPU features: Unsupported CPU feature variation detected.
  172. [    0.158159] arch_timer: Enabling local workaround for ARM erratum 858921
  173. [    0.158168] arch_timer: CPU4: Trapping CNTVCT access
  174. [    0.158172] CPU4: Booted secondary processor [410fd091]
  175. [    0.184449] Detected VIPT I-cache on CPU5
  176. [    0.184454] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  177. [    0.184464] arch_timer: Enabling local workaround for ARM erratum 858921
  178. [    0.184468] arch_timer: CPU5: Trapping CNTVCT access
  179. [    0.184471] CPU5: Booted secondary processor [410fd091]
  180. [    0.212476] Detected VIPT I-cache on CPU6
  181. [    0.212480] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  182. [    0.212490] arch_timer: Enabling local workaround for ARM erratum 858921
  183. [    0.212494] arch_timer: CPU6: Trapping CNTVCT access
  184. [    0.212497] CPU6: Booted secondary processor [410fd091]
  185. [    0.240503] Detected VIPT I-cache on CPU7
  186. [    0.240508] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  187. [    0.240517] arch_timer: Enabling local workaround for ARM erratum 858921
  188. [    0.240521] arch_timer: CPU7: Trapping CNTVCT access
  189. [    0.240524] CPU7: Booted secondary processor [410fd091]
  190. [    0.240576] smp: Brought up 1 node, 8 CPUs
  191. [    0.240748] SMP: Total of 8 processors activated.
  192. [    0.240756] CPU features: detected feature: 32-bit EL0 Support
  193. [    0.240938] CPU: All CPU(s) started at EL2
  194. [    0.240972] alternatives: patching kernel code
  195. [    0.241745] devtmpfs: initialized
  196. [    0.246806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  197. [    0.246881] futex hash table entries: 2048 (order: 6, 262144 bytes)
  198. [    0.247393] pinctrl core: initialized pinctrl subsystem
  199. [    0.248701] DMI not present or invalid.
  200. [    0.249017] NET: Registered protocol family 16
  201. [    0.250438] cpuidle: using governor menu
  202. [    0.251111] vdso: 2 pages (1 code @ ffff000008a86000, 1 data @ ffff000009045000)
  203. [    0.251133] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  204. [    0.253044] DMA: preallocated 256 KiB pool for atomic allocations
  205. [    0.253332] Serial: AMBA PL011 UART driver
  206. [    0.274492] hi3660-mbox e896b000.mailbox: Mailbox enabled
  207. [    0.275267] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
  208. [    0.275397] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
  209. [    0.275512] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart6_pmx_func, deferring probe
  210. [    0.288009] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  211. [    0.288838] ACPI: Interpreter disabled.
  212. [    0.290008] vgaarb: loaded
  213. [    0.290226] SCSI subsystem initialized
  214. [    0.290449] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
  215. [    0.290481] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
  216. [    0.290668] usbcore: registered new interface driver usbfs
  217. [    0.290701] usbcore: registered new interface driver hub
  218. [    0.290758] usbcore: registered new device driver usb
  219. [    0.290878] tcpc_class_init_1.1.1_G
  220. [    0.290894] TCPC class init OK
  221. [    0.290904] Init Richtek RegMap
  222. [    0.291007] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
  223. [    0.291035] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
  224. [    0.291063] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
  225. [    0.291415] pps_core: LinuxPPS API ver. 1 registered
  226. [    0.291422] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  227. [    0.291442] PTP clock support registered
  228. [    0.291531] EDAC MC: Ver: 3.0.0
  229. [    0.291727] dmi: Firmware registration failed.
  230. [    0.291878] Registered efivars operations
  231. [    0.292104] Advanced Linux Sound Architecture Driver Initialized.
  232. [    0.292698] clocksource: Switched to clocksource arch_sys_counter
  233. [    0.292847] VFS: Disk quotas dquot_6.6.0
  234. [    0.292894] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  235. [    0.293017] pnp: PnP ACPI: disabled
  236. [    0.296542] NET: Registered protocol family 2
  237. [    0.297030] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  238. [    0.297236] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  239. [    0.297620] TCP: Hash tables configured (established 32768 bind 32768)
  240. [    0.297761] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  241. [    0.297828] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  242. [    0.298031] NET: Registered protocol family 1
  243. [    0.298321] RPC: Registered named UNIX socket transport module.
  244. [    0.298332] RPC: Registered udp transport module.
  245. [    0.298338] RPC: Registered tcp transport module.
  246. [    0.298345] RPC: Registered tcp NFSv4.1 backchannel transport module.
  247. [    0.299323] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  248. [    0.299584] kvm [1]: 8-bit VMID
  249. [    0.299591] kvm [1]: IDMAP page: a71000
  250. [    0.299597] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  251. [    0.300236] kvm [1]: Hyp mode initialized successfully
  252. [    0.300402] kvm [1]: vgic-v2@e82b4000
  253. [    0.300491] kvm [1]: vgic interrupt IRQ1
  254. [    0.300509] kvm [1]: virtual timer IRQ4
  255. [    0.302488] audit: initializing netlink subsys (disabled)
  256. [    0.302598] audit: type=2000 audit(0.299:1): state=initialized audit_enabled=0 res=1
  257. [    0.302846] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  258. [    0.306456] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  259. [    0.306861] NFS: Registering the id_resolver key type
  260. [    0.306894] Key type id_resolver registered
  261. [    0.306901] Key type id_legacy registered
  262. [    0.306912] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  263. [    0.307071] 9p: Installing v9fs 9p2000 file system support
  264. [    0.309224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  265. [    0.309252] io scheduler noop registered
  266. [    0.309362] io scheduler cfq registered (default)
  267. [    0.309371] io scheduler mq-deadline registered
  268. [    0.309378] io scheduler kyber registered
  269. [    0.311478] pinctrl-single e896c000.pinmux: 124 pins at pa ffff0000099d5000 size 496
  270. [    0.311701] pinctrl-single ff37e000.pinmux: 6 pins at pa ffff0000099dd000 size 24
  271. [    0.311791] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffff0000099e5000 size 48
  272. [    0.311876] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffff0000099ed000 size 24
  273. [    0.311994] pinctrl-single fff11000.pinmux: 42 pins at pa ffff0000099f5000 size 168
  274. [    0.312198] pinctrl-single e896c800.pinmux: 128 pins at pa ffff0000099fd800 size 512
  275. [    0.312279] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffff000009a05800 size 24
  276. [    0.312360] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffff000009a0d800 size 24
  277. [    0.312463] pinctrl-single ff37e800.pinmux: 6 pins at pa ffff000009a15800 size 24
  278. [    0.312591] pinctrl-single fff11800.pinmux: 47 pins at pa ffff000009a1d800 size 188
  279. [    0.313878] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  280. [    0.314024] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  281. [    0.314144] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  282. [    0.314258] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  283. [    0.314371] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  284. [    0.314494] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  285. [    0.314643] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  286. [    0.314760] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  287. [    0.314896] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  288. [    0.315014] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  289. [    0.315134] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  290. [    0.315248] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  291. [    0.315379] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  292. [    0.315504] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  293. [    0.315629] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  294. [    0.315747] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  295. [    0.315868] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  296. [    0.315980] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  297. [    0.316134] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  298. [    0.316258] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  299. [    0.316384] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  300. [    0.316514] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  301. [    0.316679] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  302. [    0.316837] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  303. [    0.316972] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  304. [    0.317105] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  305. [    0.317247] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  306. [    0.317384] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  307. [    0.317511] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  308. [    0.321769] k3-dma fdf30000.dma: initialized
  309. [    0.325824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  310. [    0.327332] SuperH (H)SCI(F) driver initialized
  311. [    0.327584] msm_serial: driver initialized
  312. [    0.328588] [drm] +.
  313. [    0.328611] [drm] wait for external HDMI bridge driver.
  314. [    0.333762] loop: module loaded
  315. [    0.334164] [I/GPIO_HUB] gpio_hub_probe: step in
  316. [    0.334386] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
  317. [    0.336445] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  318. [    0.336475] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  319. [    0.336488] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  320. [    0.336500] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  321. [    0.358777] scsi host0: ufshcd
  322. [    0.370872] libphy: Fixed MDIO Bus: probed
  323. [    0.371111] tun: Universal TUN/TAP device driver, 1.6
  324. [    0.371859] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  325. [    0.371872] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  326. [    0.371906] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  327. [    0.371914] igb: Copyright (c) 2007-2014 Intel Corporation.
  328. [    0.371942] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  329. [    0.371952] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  330. [    0.372137] sky2: driver version 1.30
  331. [    0.372422] VFIO - User Level meta-driver version: 0.3
  332. [    0.372968] [USB3][hisi_dwc3_probe]+
  333. [    0.373339] [USB3][get_phy_param]eye diagram param: 0x1c466e3
  334. [    0.373349] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
  335. [    0.373358] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
  336. [    0.373365] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
  337. [    0.373372] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
  338. [    0.373405] [USB3][get_resource]this is asic platform (fpga flag 0)
  339. [    0.373413] [USB3][create_attr_file]+
  340. [    0.373472] [USB3][create_attr_file]-
  341. [    0.373482] [USB3][hi3660_usb3phy_init]+
  342. [    0.400829] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
  343. [    0.401411] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
  344. [    0.402301] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
  345. [    0.402310] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
  346. [    0.402318] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
  347. [    0.402326] [USB3][hi3660_usb3phy_init]-
  348. [    0.403631] [dwc3_otg_init]+
  349. [    0.403645] DWC3_OCFG:   0x0
  350. [    0.403651] DWC3_OCTL:   0x40
  351. [    0.403656] DWC3_OEVT:   0x80000000
  352. [    0.403661] DWC3_OEVTEN: 0x0
  353. [    0.403667] DWC3_OSTS:   0x19
  354. [    0.403671] DWC3_BCFG:   0x0
  355. [    0.403677] DWC3_BCEVT:  0x0
  356. [    0.403682] DWC3_BCEVTEN:    0x0
  357. [    0.403686] [dwc3_otg_init]-
  358. [    0.403719] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
  359. [    0.405631] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  360. [    0.405654] [USB3][hisi_dwc3_probe]init state: OFF
  361. [    0.405661] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  362. [    0.405669] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  363. [    0.405677] [USB3][hisi_usb_otg_event]event: 1
  364. [    0.405688] [USB3][hisi_dwc3_probe]-
  365. [    0.405691] [USB3][event_work]+
  366. [    0.405693] [USB3][handle_event][handle_event] type: 1
  367. [    0.405697] [dwc3_otg_work]+
  368. [    0.405697]  evt = 4
  369. [    0.405700] [dwc3_otg_stop_peripheral]+
  370. [    0.405701] [dwc3_otg_stop_peripheral]-
  371. [    0.405703] [dwc3_suspend_device] +
  372. [    0.405732] [dwc3_suspend_device] -
  373. [    0.405739] [dwc3_otg_work]-
  374. [    0.405744] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  375. [    0.405753] [USB3][handle_event]hisi usb status: DEVICE -> OFF
  376. [    0.405759] [USB3][event_work]-
  377. [    0.406399] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  378. [    0.406409] ehci-pci: EHCI PCI platform driver
  379. [    0.406435] ehci-platform: EHCI generic platform driver
  380. [    0.406522] ehci-orion: EHCI orion driver
  381. [    0.406582] ehci-exynos: EHCI EXYNOS driver
  382. [    0.406638] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  383. [    0.406691] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  384. [    0.406713] ohci-pci: OHCI PCI platform driver
  385. [    0.406743] ohci-platform: OHCI generic platform driver
  386. [    0.406807] ohci-exynos: OHCI EXYNOS driver
  387. [    0.407083] usbcore: registered new interface driver usb-storage
  388. [    0.407804] [I/hisi_pd] pd_dpm_init
  389. [    0.407896] [I/hisi_pd] pd_dpm_probe : +++++++++
  390. [    0.407943] [I/hisi_pd] pd_dpm_probe ++++
  391. [    0.407943]
  392. [    0.408113] rt1711h_init (1.1.8_G): initializing...
  393. [    0.408140] rt1711h node found...
  394. [    0.409045] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
  395. [    0.409508] i2c /dev entries driver
  396. [    0.411155] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
  397. [    0.411185] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
  398. [    0.411202] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
  399. [    0.411218] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
  400. [    0.411261] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
  401. [    0.411271] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded
  402. [    0.413844] sdhci: Secure Digital Host Controller Interface driver
  403. [    0.413867] sdhci: Copyright(c) Pierre Ossman
  404. [    0.413990] Synopsys Designware Multimedia Card Interface Driver
  405. [    0.414534] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
  406. [    0.414546] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  407. [    0.416802] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  408. [    0.417123] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  409. [    0.417136] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  410. [    0.417187] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 57,32 bit host data width,256 deep fifo
  411. [    0.417423] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  412. [    0.439299] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  413. [    0.458957] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  414. [    0.459000] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  415. [    0.461478] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  416. [    0.462088] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  417. [    0.462113] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  418. [    0.462184] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 58,32 bit host data width,256 deep fifo
  419. [    0.463508] sdhci-pltfm: SDHCI platform and OF driver helper
  420. [    0.467301] ledtrig-cpu: registered to indicate activity on CPUs
  421. [    0.468784] usbcore: registered new interface driver usbhid
  422. [    0.468815] usbhid: USB HID core driver
  423. [    0.470417] optee: probing for conduit method from DT.
  424. [    0.474845] optee: initialized driver
  425. [    0.476904] NET: Registered protocol family 17
  426. [    0.477030] 9pnet: Installing 9P2000 support
  427. [    0.477113] Key type dns_resolver registered
  428. [    0.478566] registered taskstats version 1
  429. [    0.485684] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  430. [    0.486489] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  431. [    0.486614] serial serial0: tty port ttyAMA4 registered
  432. [    0.486960] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
  433. [    0.521865] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  434. [    0.822864] ufs final power mode: gear = 3, lane = 1, pwr = 1, rate = 2
  435. [    0.822867] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  436. [    0.824716] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  437. [    0.824720] ufshcd-hi3660 ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
  438. [    0.824893] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  439. [    0.825462] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c150hN
  440. [    0.825469] scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  441. [    0.826310] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c130hN
  442. [    0.826315] scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  443. [    0.826778] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c144hN
  444. [    0.826782] scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  445. [    0.827196] scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  446. [    0.827896] scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  447. [    0.828074] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  448. [    0.828077] sd 0:0:0:0: [sda] 16384-byte physical blocks
  449. [    0.828253] sd 0:0:0:0: [sda] Write Protect is off
  450. [    0.828536] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  451. [    0.828711] scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  452. [    0.829704] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  453. [    0.829708] sd 0:0:0:1: [sdb] 16384-byte physical blocks
  454. [    0.829789] scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  455. [    0.829908] sd 0:0:0:1: [sdb] Write Protect is off
  456. [    0.830427] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  457. [    0.831050] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  458. [    0.831054] sd 0:0:0:2: [sdc] 16384-byte physical blocks
  459. [    0.831476] sd 0:0:0:2: [sdc] Write Protect is off
  460. [    0.831920] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  461. [    0.832248] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  462. [    0.832252] sd 0:0:0:3: [sdd] 16384-byte physical blocks
  463. [    0.832564] sd 0:0:0:3: [sdd] Write Protect is off
  464. [    0.833309] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  465. [    0.835743] sd 0:0:0:0: [sda] Attached SCSI disk
  466. [    0.837036] Alternate GPT is invalid, using primary GPT.
  467. [    0.837051]  sdc: sdc1
  468. [    0.837152] sd 0:0:0:1: [sdb] Attached SCSI disk
  469. [    0.837601] Alternate GPT is invalid, using primary GPT.
  470. [    0.837630]  sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
  471. [    0.838216] sd 0:0:0:2: [sdc] Attached SCSI disk
  472. [    0.839415] sd 0:0:0:3: [sdd] Attached SCSI disk
  473. [    2.862438] console [ttyAMA6] enabled
  474. [    2.867155] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  475. [    2.874290] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffff000009d05000
  476. [    2.883167] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  477. [    2.891140] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  478. [    2.898247] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffff000009d0d000
  479. [    2.907092] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  480. [    2.917559] rt1711_i2c_probe
  481. [    2.920458] I2C functionality : OK...
  482. [    2.927310] rt_parse_dt
  483. [    2.929804] rt1711h_chipID = 0x2171
  484. [    2.933298] regmap_device_register: name = rt1711-4e
  485. [    2.938304]  rt_regmap_rt1711-4e: rt register cache data init
  486. [    2.944059]  rt_regmap_rt1711-4e: cache cata init successfully
  487. [    2.949971] tcpc_device_register register tcpc device (type_c_port0)
  488. [    2.956402] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
  489. [    2.963804] PD Timer number = 37
  490. [    2.967489] tcpci_timer_init : init OK
  491. [    2.971682] pd_parse_pdata
  492. [    2.974403] pd_parse_pdata src pdo data =
  493. [    2.978413] pd_parse_pdata 0: 0x00019064
  494. [    2.982339] pd_parse_pdata snk pdo data =
  495. [    2.986347] pd_parse_pdata 0: 0x000190c8
  496. [    2.990269] pd_parse_pdata 1: 0x0002d0c8
  497. [    2.994192] pd_parse_pdata id vdos data =
  498. [    2.998201] pd_parse_pdata 0: 0xd00029cf
  499. [    3.002121] pd_parse_pdata 1: 0x00000000
  500. [    3.006043] pd_parse_pdata 2: 0x00010000
  501. [    3.009967] dpm_caps: local_dr_power
  502. [    3.013543] dpm_caps: local_dr_data
  503. [    3.017035] dpm_caps: local_ext_power
  504. [    3.020697] dpm_caps: local_usb_comm
  505. [    3.024267] dpm_caps: local_usb_suspend
  506. [    3.028101] dpm_caps: local_high_cap
  507. [    3.031676] dpm_caps: local_give_back
  508. [    3.035337] dpm_caps: local_no_suspend
  509. [    3.039092] dpm_caps: local_vconn_supply
  510. [    3.043015] dpm_caps: attemp_discover_cable_dfp
  511. [    3.047545] dpm_caps: attemp_enter_dp_mode
  512. [    3.051641] dpm_caps: attemp_discover_cable
  513. [    3.055823] dpm_caps: attemp_discover_id
  514. [    3.059745] dpm_caps: pr_reject_as_source
  515. [    3.063754] dpm_caps: pr_reject_as_sink
  516. [    3.067589] dpm_caps: pr_check_gp_source
  517. [    3.071511] dpm_caps: pr_check_gp_sink
  518. [    3.075259] dpm_caps: dr_reject_as_dfp
  519. [    3.079007] dpm_caps: dr_reject_as_ufp
  520. [    3.082755] dpm_caps: snk_prefer_low_voltage
  521. [    3.087025] dpm_caps: snk_ignore_mismatch_current
  522. [    3.091731] dpm_caps = 0xc010c10b
  523. [    3.095046] [I/hisi_pd] PE:pd_core_init
  524. [    3.099849] rt1711_init_alert name = type_c_port0
  525. [    3.104589] rt1711_init_alert gpio # = 291
  526. [    3.108742] GPIO requested...
  527. [    3.111806] rt1711_init_alert : IRQ number = 69
  528. [    3.116376] rt1711_init_alert : irq initialized...
  529. [    3.122044] IRQF_NO_THREAD Test
  530. [    3.132775] [I/hisi_pd] TPC-I:typec_init: DRP
  531. [    3.192717] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  532. [    3.200134] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  533. [    3.207548] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
  534. [    3.214310] [E/hisi_pd] tcpci_disable_vbus_control: !!!++++++++
  535. [    3.220252] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=0,+++
  536. [    3.226104] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
  537. [    3.232400] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
  538. [    3.238252] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
  539. [    3.245508] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  540. [    3.251267] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  541. [    3.257376] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
  542. [    3.263134] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
  543. [    3.269242] [USB3][hisi_usb_otg_event]event: 2
  544. [    3.273711] [I/hisi_pd] TPC-I:** Unattached.SNK
  545. [    3.273951] [USB3][event_work]+
  546. [    3.273955] [USB3][handle_event][handle_event] type: 2
  547. [    3.273958] [USB3][set_vbus_power]set port power 1
  548. [    3.273965] [dwc3_otg_work]+
  549. [    3.273965]  evt = 2
  550. [    3.273970] [dwc3_resume_device] +
  551. [    3.274668] [dwc3_resume_device] -
  552. [    3.274671] [dwc3_otg_start_host]+
  553. [    3.275489] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  554. [    3.275516] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  555. [    3.276398] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
  556. [    3.276475] xhci-hcd xhci-hcd.0.auto: irq 66, io mem 0xff100000
  557. [    3.278754] hub 1-0:1.0: USB hub found
  558. [    3.278783] hub 1-0:1.0: 1 port detected
  559. [    3.279038] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  560. [    3.279052] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  561. [    3.279144] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  562. [    3.279909] hub 2-0:1.0: USB hub found
  563. [    3.279933] hub 2-0:1.0: 1 port detected
  564. [    3.280218] [dwc3_otg_start_host]-
  565. [    3.280220] [dwc3_otg_work]-
  566. [    3.280225] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  567. [    3.280230] [USB3][handle_event]hisi usb_status: OFF -> HOST
  568. [    3.280233] [USB3][event_work]-
  569. [    3.392033] tcpc_device_irq_enable : tcpc irq enable OK!
  570. [    3.393218] [I/hisi_pd] [TCPC-I]ps_change=1
  571. [    3.401645] rt1711_i2c_probe probe OK!
  572. [    3.407219] [drm] +.
  573. [    3.409543] [drm] wait for external HDMI bridge driver.
  574. [    3.416258] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  575. [    3.422377] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  576. [    3.434533] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  577. [    3.441581] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  578. [    3.447994] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  579. [    3.453394] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 58,32 bit host data width,128 deep fifo
  580. [    3.463018] mmc_host mmc1: card is non-removable.
  581. [    3.567107] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  582. [    3.593664] [drm] +.
  583. [    3.595986] [drm] wait for external HDMI bridge driver.
  584. [    3.602576] input: keys as /devices/platform/keys/input/input0
  585. [    3.609329] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:28:25 UTC (1705)
  586. [    3.617643] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  587. [    3.618416] [drm] +.
  588. [    3.618448] [drm] wait for external HDMI bridge driver.
  589. [    3.633633] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  590. [    3.636391] ALSA device list:
  591. [    3.636394]   No soundcards found.
  592. [    3.649307] uart-pl011 fff32000.serial: no DMA platform data
  593. [    3.655880] EXT4-fs (sdd10): couldn't mount as ext3 due to feature incompatibilities
  594. [    3.674496] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  595. [    3.687968] mmc1: new SDIO card at address 0001
  596. [    3.691719] EXT4-fs (sdd10): recovery complete
  597. [    3.692066] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: (null)
  598. [    3.692126] VFS: Mounted root (ext4 filesystem) on device 8:58.
  599. [    3.693440] devtmpfs: mounted
  600. [    3.693931] Freeing unused kernel memory: 1152K
  601. [    3.749680] systemd[1]: System time before build time, advancing clock.
  602.  
  603. Welcome to Debian GNU/Linux 9 (stretch)!
  604.  
  605. [    3.791598] hub 1-1:1.0: USB hub found
  606. [    3.795610] hub 1-1:1.0: 5 ports detected
  607. [    3.825069] [drm] +.
  608. [    3.827550] [drm] wait for external HDMI bridge driver.
  609. NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-online.service is masked.
  610. [  OK  ] Listening on udev Kernel Socket.
  611. [   3.892846] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  612. [0;32m  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  613. [  OK  ] Listening on Syslog Socket.
  614. [  OK  ] Reached target Swap.
  615. [  OK  ] Created slice User and Session Slice.
  616. [  OK  ] Listening on Journal Socket.
  617. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
  618. [  OK  ] Listening on udev Control Socket.
  619. [    3.935415] hub 2-1:1.0: USB hub found
  620. m  OK  ] Listening on Journal Socket (/dev/l[    3.942494] hub 2-1:1.0: 5 ports detected
  621. og).
  622. [  OK  ] Listening on J[    3.943782] [drm] +.
  623. ournal Audit Socket.
  624. [  OK  [    3.943817] [drm] wait for external HDMI bridge driver.
  625. ] Reached target Remote File Systems.
  626. [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
  627. [  OK  ] Reached target Paths.
  628. [  OK  ] Reached target Encrypted Volumes.
  629. [  OK  ] Listening on fsck to fsckd communication Socket.
  630. [  OK  ] Created slice System Slice.
  631.          Starting Load Kernel Modules...
  632. [  OK  ] Reached target Slices.
  633.          Mounting POSIX Message Queue File System...
  634. [  OK  ] Created slice system-getty.slice.
  635.          Mounting Debug File System...
  636.          Starting Set the console keyboard layout...
  637.          Starting Journal Service...
  638.          Starting Create Static Device Nodes in /dev...
  639.          Starting Nameserver information manager...
  640.          Starting Remount[    4.031589] EXT4-fs (sdd10): re-mounted. Opts: (null)
  641.  Root and Kernel File Systems...
  642.          Mounting Huge Pages File System...
  643. [  OK  ] Created slice system-serial\x2dgetty.slice.
  644. [  OK  ] Mounted Debug File System.
  645. [  OK  ] Mounted Huge Pages File System.
  646. [  OK  ] Mounted POSIX Message Queue File System.
  647. [  OK  ] Started Load Kernel Modules.
  648. [  OK  ] Started Create Static Device Nodes in /dev.
  649. [  OK  ] Started Nameserver information manager.
  650.          Starting udev Kernel Device Manager...
  651.          Mounting Configuration File System...
  652.          Starting Apply Kernel Variables...
  653. [  OK  ] Mounted Configuration File System.
  654. [  OK  ] Started Apply Kernel Variables.
  655. [  OK  ] Started Journal Service.
  656. [  OK  ] Started udev Kernel Device Manager.
  657. [    4.116725] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
  658. [  OK  ] Started Remount Root and Kernel File Systems.
  659. [  OK  ] Started Set the console keyboard layout.
  660. [  OK  ] Reached target Local File Systems (Pre).
  661. [  OK  ] Reached target Local File Systems.
  662.          Starting Set console font and keymap...
  663.          Starting Raise network interfaces...
  664.          Starting Load/Save Random Seed...
  665.          Starting udev Coldplug all Devices...
  666.          Starting Flush Journal to Persistent Storage...
  667. [  OK  ] Started Set console font and keymap.
  668. [  OK  ] Started Load/Save Random Seed.
  669. [    4.272420] [drm] +.
  670. [    4.274732] [drm] wait for external HDMI bridge driver.
  671. [    4.293171] systemd-journald[1671]: Received request to flush runtime journal from PID 1
  672. [  OK  ] Started Flush Journal to Persistent Storage.
  673.          Starting Create Volatile Files and Directories...
  674. [  OK  ] Started Create Volatile Files and Directories.
  675. [  OK  ] Started udev Coldplug all Devices.
  676. [    4.364729] usb 1-1.5: new high-speed USB device number 4 using xhci-hcd
  677.          Starting Update UTMP about System Boot/Shutdown...
  678.          Starting Network Time Synchronization...
  679. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  680. [  OK  ] Started Raise network interfaces.
  681. [    4.474152] [drm] +.
  682. [    4.476459] [drm] wait for external HDMI bridge driver.
  683. [  OK  ] Found device /dev/ttyAMA6.
  684. [  OK  ] Found device KLUBG4G1CE-B0B1 BOOT.
  685. [  OK  ] Started Network Time Synchronization.
  686. [  OK  ] Reached target System Initialization.
  687. [  OK  ] Listening on D-Bus System Message Bus Socket.
  688. [  OK  ] Reached target Sockets.
  689. [  OK  ] Reached target Basic System.
  690. [  OK  ] Started Regular background program processing daemon.
  691.          Starting Link to plaform specific files...
  692. [  OK  ] Started D-Bus System Message Bus.
  693.          Starting Network Manager...
  694.          Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  695.          Starting Login Service...
  696.          Starting Initialize hardware monitoring sensors...
  697.          Starting System Logging Service...
  698. [  OK  ] Started Daily Cleanup of Temporary Directories.
  699. [  OK  ] Reached target System Time Synchronized.
  700. [  OK  ] Started Trigger anacron every hour.
  701. [  OK  ] Started Daily apt download activities.
  702. [  OK  ] Started Run anacron jobs.
  703. [  OK  ] Started Daily apt upgrade and clean activities.
  704. [  OK  ] Reached target Timers.
  705.          Mounting /boot/efi...
  706. [    4.905184] FAT-fs (sdd7): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  707. [  OK  ] Started System Logging Service.
  708. [  OK  ] Mounted /boot/efi.
  709. [  OK  ] Started Link to plaform specific files.
  710. [  OK  ] Started Initialize hardware monitoring sensors.
  711. [  OK  ] Started Network Manager.
  712. [  OK  ] Started Login Service.
  713.          Starting Network Manager Script Dispatcher Service...
  714. [  OK  ] Reached target Network.
  715.          Starting Permit User Sessions...
  716.          Starting OpenBSD Secure Shell server...
  717. [  OK  ] Reached target Network is Online.
  718.          Starting /etc/rc.local Compatibility...
  719.          Starting LSB: Advanced IEEE 802.11 management daemon...
  720. [  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  721. [  OK  ] Started Permit User Sessions.
  722. [  OK  ] Started /etc/rc.local Compatibility.
  723. [  OK  ] Started LSB: Advanced IEEE 802.11 management daemon.
  724. [  OK  ] Started OpenBSD Secure Shell server.
  725. [  OK  ] Started Network Manager Script Dispatcher Service.
  726.          Starting Hostname Service...
  727. [  OK  ] Started Getty on tty1.
  728. [  OK  ] Started Serial Getty on ttyAMA6.
  729. [  OK  ] Reached target Login Prompts.
  730.          Starting LSB: set CPUFreq kernel parameters...
  731. [  OK  ] Started LSB: set CPUFreq kernel parameters.
  732. [  OK  ] Reached target Multi-User System.
  733. [  OK  ] Reached target Graphical Interface.
  734.          Starting Update UTMP about System Runlevel Changes...
  735. [  OK  ] Started Update UTMP about System Runlevel Changes.
  736. [  OK  ] Started Hostname Service.
  737.  
  738. Debian GNU/Linux 9 linaro-developer ttyAMA6
  739.  
  740. linaro-developer login: root (automatic login)
  741.  
  742. Last login: Thu Nov  3 17:16:43 UTC 2016 on ttyAMA6
  743. Linux linaro-developer 4.14.0-rc7-linaro-hikey960+ #8 SMP PREEMPT Thu Mar 8 11:34:37 UTC 2018 aarch64
  744.  
  745. The programs included with the Debian GNU/Linux system are free software;
  746. the exact distribution terms for each program are described in the
  747. individual files in /usr/share/doc/*/copyright.
  748.  
  749. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  750. permitted by applicable law.
  751. root@linaro-developer:~# [   20.893633] random: crng init done
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top