API tools faq
paste
Advertisement
asavah

N56UA1RGMII

asavah
Jul 5th, 2016
140
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.33 KB | None | 0 0
raw download clone embed print report
  1. Jan 1 00:00:04 syslogd started: BusyBox v1.24.2
  2. Jan 1 00:00:04 RT-N56U: firmware version: 3.4.3.9-099_67c42b1
  3. Jan 1 00:00:05 kernel: klogd started: BusyBox v1.24.2 (2016-07-05 13:52:28 EEST)
  4. Jan 1 00:00:05 kernel: Linux version 3.4.112 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 Tue Jul 5 13:50:22 EEST 2016
  5. Jan 1 00:00:05 kernel: Ralink SoC: RT3883, RevID: 0105, RAM: DDR2, XTAL: 40MHz
  6. Jan 1 00:00:05 kernel: CPU/OCP/SYS frequency: 500/166/166 MHz
  7. Jan 1 00:00:05 kernel: CPU revision is: 0001974c (MIPS 74Kc)
  8. Jan 1 00:00:05 kernel: Determined physical RAM map:
  9. Jan 1 00:00:05 kernel: memory: 08000000 @ 00000000 (usable)
  10. Jan 1 00:00:05 kernel: Zone PFN ranges:
  11. Jan 1 00:00:05 kernel: Normal 0x00000000 -> 0x00008000
  12. Jan 1 00:00:05 kernel: Movable zone start PFN for each node
  13. Jan 1 00:00:05 kernel: Early memory PFN ranges
  14. Jan 1 00:00:05 kernel: 0: 0x00000000 -> 0x00008000
  15. Jan 1 00:00:05 kernel: On node 0 totalpages: 32768
  16. Jan 1 00:00:05 kernel: free_area_init_node: node 0, pgdat 802dca50, node_mem_map 81000000
  17. Jan 1 00:00:05 kernel: Normal zone: 256 pages used for memmap
  18. Jan 1 00:00:05 kernel: Normal zone: 0 pages reserved
  19. Jan 1 00:00:05 kernel: Normal zone: 32512 pages, LIFO batch:7
  20. Jan 1 00:00:05 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  21. Jan 1 00:00:05 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  22. Jan 1 00:00:05 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. Jan 1 00:00:05 kernel: pcpu-alloc: [0] 0
  24. Jan 1 00:00:05 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  25. Jan 1 00:00:05 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
  26. Jan 1 00:00:05 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
  27. Jan 1 00:00:05 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  28. Jan 1 00:00:05 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  29. Jan 1 00:00:05 kernel: Writing ErrCtl register=00000000
  30. Jan 1 00:00:05 kernel: Readback ErrCtl register=00000000
  31. Jan 1 00:00:05 kernel: Memory: 126680k/131072k available (2579k kernel code, 4392k reserved, 352k data, 200k init, 0k highmem)
  32. Jan 1 00:00:05 kernel: NR_IRQS:40
  33. Jan 1 00:00:05 kernel: console [ttyS0] enabled
  34. Jan 1 00:00:05 kernel: Calibrating delay loop... 249.34 BogoMIPS (lpj=498688)
  35. Jan 1 00:00:05 kernel: pid_max: default: 32768 minimum: 301
  36. Jan 1 00:00:05 kernel: Mount-cache hash table entries: 512
  37. Jan 1 00:00:05 kernel: NET: Registered protocol family 16
  38. Jan 1 00:00:05 kernel: bio: create slab <bio-0> at 0
  39. Jan 1 00:00:05 kernel: PCI host bridge to bus 0000:00
  40. Jan 1 00:00:05 kernel: pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
  41. Jan 1 00:00:05 kernel: pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff]
  42. Jan 1 00:00:05 kernel: pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
  43. Jan 1 00:00:05 kernel: pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
  44. Jan 1 00:00:05 kernel: pci 0000:00:00.0: supports D1
  45. Jan 1 00:00:05 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  46. Jan 1 00:00:05 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  47. Jan 1 00:00:05 kernel: pci 0000:01:00.0: [1814:3091] type 00 class 0x028000
  48. Jan 1 00:00:05 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
  49. Jan 1 00:00:05 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot
  50. Jan 1 00:00:05 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  51. Jan 1 00:00:05 kernel: pci 0000:00:00.0: BAR 1: assigned [mem 0x20100000-0x2010ffff]
  52. Jan 1 00:00:05 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff]
  53. Jan 1 00:00:05 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
  54. Jan 1 00:00:05 kernel: pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
  55. Jan 1 00:00:05 kernel: PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  56. Jan 1 00:00:05 kernel: Switching to clocksource MIPS
  57. Jan 1 00:00:05 kernel: NET: Registered protocol family 2
  58. Jan 1 00:00:05 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  59. Jan 1 00:00:05 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  60. Jan 1 00:00:05 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  61. Jan 1 00:00:05 kernel: TCP: Hash tables configured (established 4096 bind 4096)
  62. Jan 1 00:00:05 kernel: TCP: reno registered
  63. Jan 1 00:00:05 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
  64. Jan 1 00:00:05 kernel: NET: Registered protocol family 1
  65. Jan 1 00:00:05 kernel: PCI: CLS 32 bytes, default 32
  66. Jan 1 00:00:05 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
  67. Jan 1 00:00:05 kernel: msgmni has been set to 247
  68. Jan 1 00:00:05 kernel: io scheduler noop registered (default)
  69. Jan 1 00:00:05 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  70. Jan 1 00:00:05 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
  71. Jan 1 00:00:05 kernel: Ralink GPIO driver initialized. Number of GPIO: 96, GPIO mode: 0000185D
  72. Jan 1 00:00:05 kernel: loop: module loaded
  73. Jan 1 00:00:05 kernel: ralink flash device: 0x1000000 at 0x1c000000
  74. Jan 1 00:00:05 kernel: Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
  75. Jan 1 00:00:05 kernel: Ralink SoC physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
  76. Jan 1 00:00:05 kernel: Amd/Fujitsu Extended Query Table at 0x0040
  77. Jan 1 00:00:05 kernel: Amd/Fujitsu Extended Query version 1.1.
  78. Jan 1 00:00:05 kernel: number of CFI chips: 1
  79. Jan 1 00:00:05 kernel: Creating 7 MTD partitions on "Ralink SoC physically mapped flash":
  80. Jan 1 00:00:05 kernel: 0x000000000000-0x000000030000 : "Bootloader"
  81. Jan 1 00:00:05 kernel: 0x000000030000-0x000000040000 : "Config"
  82. Jan 1 00:00:05 kernel: 0x000000040000-0x000000050000 : "Factory"
  83. Jan 1 00:00:05 kernel: 0x000000050000-0x00000015bd00 : "Kernel"
  84. Jan 1 00:00:05 kernel: 0x00000015bd00-0x0000007f0000 : "RootFS"
  85. Jan 1 00:00:05 kernel: 0x0000007f0000-0x000000800000 : "Storage"
  86. Jan 1 00:00:05 kernel: 0x000000050000-0x000000800000 : "Firmware_Stub"
  87. Jan 1 00:00:05 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
  88. Jan 1 00:00:05 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
  89. Jan 1 00:00:05 kernel: raeth: NAPI support, weight 32
  90. Jan 1 00:00:05 kernel: raeth: Byte Queue Limits (BQL) support
  91. Jan 1 00:00:05 kernel: PPP generic driver version 2.4.2
  92. Jan 1 00:00:05 kernel: PPP MPPE Compression module registered
  93. Jan 1 00:00:05 kernel: NET: Registered protocol family 24
  94. Jan 1 00:00:05 kernel: PPTP driver version 0.8.5
  95. Jan 1 00:00:05 kernel: Realtek RTL8367M GSW Driver v3.1.
  96. Jan 1 00:00:05 kernel: rtl8367 - hw bridge: W|LLLL
  97. Jan 1 00:00:05 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
  98. Jan 1 00:00:05 kernel: xt_time: kernel timezone is -0000
  99. Jan 1 00:00:05 kernel: Bridge firewalling registered
  100. Jan 1 00:00:05 kernel: gre: GRE over IPv4 demultiplexor driver
  101. Jan 1 00:00:05 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
  102. Jan 1 00:00:05 kernel: TCP: cubic registered
  103. Jan 1 00:00:05 kernel: NET: Registered protocol family 10
  104. Jan 1 00:00:05 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
  105. Jan 1 00:00:05 kernel: IPv6 over IPv4 tunneling driver
  106. Jan 1 00:00:05 kernel: NET: Registered protocol family 17
  107. Jan 1 00:00:05 kernel: L2TP core driver, V2.0
  108. Jan 1 00:00:05 kernel: PPPoL2TP kernel driver, V2.0
  109. Jan 1 00:00:05 kernel: 8021q: 802.1Q VLAN Support v1.8
  110. Jan 1 00:00:05 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
  111. Jan 1 00:00:05 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  112. Jan 1 00:00:05 kernel: Freeing unused kernel memory: 200k freed
  113. Jan 1 00:00:05 kernel: Algorithmics/MIPS FPU Emulator v1.5
  114. Jan 1 00:00:05 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel.
  115. Jan 1 00:00:05 kernel: APSoC AP Driver version: 2.7.2.0
  116. Jan 1 00:00:05 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  117. Jan 1 00:00:05 kernel: RT309x AP Driver version: 2.7.1.5
  118. Jan 1 00:00:05 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
  119. Jan 1 00:00:05 kernel: raeth: HW VLAN TX offload enabled
  120. Jan 1 00:00:05 kernel: raeth: HW Scatter/Gather TX offload enabled
  121. Jan 1 00:00:05 kernel: rtl8367 - set broadcast storm control rate as: 10240 kbps
  122. Jan 1 00:00:05 kernel: device eth2.1 entered promiscuous mode
  123. Jan 1 00:00:05 kernel: device eth2 entered promiscuous mode
  124. Jan 1 00:00:07 kernel: =====================================================
  125. Jan 1 00:00:08 kernel: Channel 36 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
  126. Jan 1 00:00:08 kernel: Channel 40 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
  127. Jan 1 00:00:08 kernel: Channel 44 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
  128. Jan 1 00:00:08 kernel: Channel 48 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
  129. Jan 1 00:00:08 kernel: =====================================================
  130. Jan 1 00:00:08 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 36
  131. Jan 1 00:00:08 kernel: Min Dirty = 0
  132. Jan 1 00:00:08 kernel: ExChannel = 40 , 0
  133. Jan 1 00:00:08 kernel: BW = 40
  134. Jan 1 00:00:08 kernel: device ra0 entered promiscuous mode
  135. Jan 1 00:00:10 kernel: ch1 bssid=b4:75:0e:15:26:1e
  136. Jan 1 00:00:10 kernel: ch1 bssid=ec:23:3d:de:6c:c0
  137. Jan 1 00:00:10 kernel: ch1 bssid=a0:f3:c1:f1:4f:f6
  138. Jan 1 00:00:10 kernel: ch2 bssid=c4:6e:1f:59:df:08
  139. Jan 1 00:00:10 kernel: ch3 bssid=f4:f2:6d:e7:e4:ca
  140. Jan 1 00:00:10 kernel: ch4 bssid=64:70:02:fd:01:62
  141. Jan 1 00:00:10 kernel: ch4 bssid=e8:94:f6:a0:83:fd
  142. Jan 1 00:00:10 kernel: ch5 bssid=00:1d:5a:d0:da:f9
  143. Jan 1 00:00:10 kernel: ch6 bssid=00:14:d1:51:12:e2
  144. Jan 1 00:00:10 kernel: ch6 bssid=f4:ec:38:ef:20:58
  145. Jan 1 00:00:10 kernel: ch6 bssid=4c:ac:0a:5d:78:4a
  146. Jan 1 00:00:10 kernel: ch6 bssid=f8:d1:11:3c:3b:78
  147. Jan 1 00:00:10 kernel: ch9 bssid=b0:48:7a:96:f3:04
  148. Jan 1 00:00:10 kernel: ch9 bssid=c4:6e:1f:e1:54:18
  149. Jan 1 00:00:10 kernel: ch10 bssid=64:70:02:e7:06:a6
  150. Jan 1 00:00:10 kernel: ch11 bssid=e8:94:f6:9a:4d:98
  151. Jan 1 00:00:10 kernel: ch11 bssid=30:b5:c2:99:f3:64
  152. Jan 1 00:00:10 kernel: ch13 bssid=d8:50:e6:c9:5d:d8
  153. Jan 1 00:00:10 kernel: =====================================================
  154. Jan 1 00:00:10 kernel: Channel 1 : Dirty = 338, False CCA = 7, Busy Time = 0, Skip Channel = FALSE
  155. Jan 1 00:00:10 kernel: Channel 2 : Dirty = 358, False CCA = 117, Busy Time = 0, Skip Channel = FALSE
  156. Jan 1 00:00:10 kernel: Channel 3 : Dirty = 374, False CCA = 107, Busy Time = 0, Skip Channel = FALSE
  157. Jan 1 00:00:10 kernel: Channel 4 : Dirty = 416, False CCA = 97, Busy Time = 0, Skip Channel = FALSE
  158. Jan 1 00:00:10 kernel: Channel 5 : Dirty = 414, False CCA = 107, Busy Time = 0, Skip Channel = FALSE
  159. Jan 1 00:00:10 kernel: Channel 6 : Dirty = 480, False CCA = 162, Busy Time = 0, Skip Channel = FALSE
  160. Jan 1 00:00:10 kernel: Channel 7 : Dirty = 344, False CCA = 279, Busy Time = 0, Skip Channel = FALSE
  161. Jan 1 00:00:10 kernel: Channel 8 : Dirty = 316, False CCA = 36, Busy Time = 0, Skip Channel = FALSE
  162. Jan 1 00:00:10 kernel: Channel 9 : Dirty = 364, False CCA = 96, Busy Time = 0, Skip Channel = FALSE
  163. Jan 1 00:00:10 kernel: Channel 10 : Dirty = 302, False CCA = 55, Busy Time = 0, Skip Channel = FALSE
  164. Jan 1 00:00:10 kernel: Channel 11 : Dirty = 256, False CCA = 125, Busy Time = 0, Skip Channel = FALSE
  165. Jan 1 00:00:10 kernel: Channel 12 : Dirty = 172, False CCA = 87, Busy Time = 0, Skip Channel = TRUE
  166. Jan 1 00:00:10 kernel: Channel 13 : Dirty = 190, False CCA = 38, Busy Time = 0, Skip Channel = TRUE
  167. Jan 1 00:00:10 kernel: =====================================================
  168. Jan 1 00:00:10 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 12
  169. Jan 1 00:00:10 kernel: Min Dirty = 172
  170. Jan 1 00:00:10 kernel: ExChannel = 8 , 0
  171. Jan 1 00:00:10 kernel: BW = 40
  172. Jan 1 00:00:10 kernel: device rai0 entered promiscuous mode
  173. Jan 1 00:00:11 kernel: br0: port 3(rai0) entered forwarding state
  174. Jan 1 00:00:11 kernel: br0: port 2(ra0) entered forwarding state
  175. Jan 1 00:00:11 kernel: br0: port 1(eth2.1) entered forwarding state
  176. Jan 1 00:00:12 kernel: rtl8367 - IGMP/MLD snooping: 1
  177. Jan 1 00:00:12 dnsmasq[163]: started, version 2.76 cachesize 1024
  178. Jan 1 00:00:12 dnsmasq[163]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
  179. Jan 1 00:00:12 dnsmasq-dhcp[163]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
  180. Jan 1 00:00:12 dnsmasq-dhcp[163]: DHCP, sockets bound exclusively to interface br0
  181. Jan 1 00:00:12 dnsmasq[163]: read /etc/hosts - 4 addresses
  182. Jan 1 00:00:12 dnsmasq[163]: read /etc/storage/dnsmasq/hosts - 0 addresses
  183. Jan 1 00:00:12 dnsmasq-dhcp[163]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
  184. Jan 1 00:00:12 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
  185. Jan 1 00:00:12 RT-N56U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
  186. Jan 1 00:00:12 RT-N56U: Hardware NAT/Routing: IPv4 UDP flow offload - OFF
  187. Jan 1 00:00:12 DHCP MAN Client: starting on eth2.2 ...
  188. Jan 1 00:00:12 pppd[188]: Plugin rp-pppoe.so loaded.
  189. Jan 1 00:00:12 pppd[188]: RP-PPPoE plugin version 3.12 compiled against pppd 2.4.7
  190. Jan 1 00:00:12 pppd[189]: pppd 2.4.7 started by iac, uid 0
  191. Jan 1 00:00:13 httpd[191]: Server listening port 80 (HTTP).
  192. Jan 1 00:00:13 kernel: br0: port 3(rai0) entered forwarding state
  193. Jan 1 00:00:13 kernel: br0: port 2(ra0) entered forwarding state
  194. Jan 1 00:00:14 kernel: br0: port 1(eth2.1) entered forwarding state
  195. Jan 1 00:00:28 sshd[201]: Server listening on :: port 22.
  196. Jan 1 00:00:28 sshd[201]: Server listening on 0.0.0.0 port 22.
  197. Jan 1 00:00:28 miniupnpd[205]: version 2.0 starting UPnP-IGD ext if ppp0 BOOTID=1420063228
  198. Jan 1 00:00:28 miniupnpd[205]: HTTP listening on port 62710
  199. Jan 1 00:00:47 pppd[189]: Timeout waiting for PADO packets
  200. Jan 1 00:02:02 pppd[189]: Timeout waiting for PADO packets
  201. Jan 1 00:03:17 pppd[189]: Timeout waiting for PADO packets
  202. Jan 1 00:04:33 pppd[189]: Timeout waiting for PADO packets
  203. Jan 1 00:05:48 pppd[189]: Timeout waiting for PADO packets
  204. Jan 1 00:07:03 pppd[189]: Timeout waiting for PADO packets
  205. Jan 1 00:08:04 detect_link: WAN port link restored!
  206. Jan 1 00:08:08 RT-N56U: force WAN DHCP client renew...
  207. Jan 1 00:08:12 detect_link: WAN port link down detected!
  208. Jan 1 00:08:18 detect_link: WAN port link restored!
  209. Jan 1 00:08:18 pppd[189]: Timeout waiting for PADO packets
  210. Jan 1 00:09:33 pppd[189]: Timeout waiting for PADO packets
  211. Jan 1 00:10:48 pppd[189]: Timeout waiting for PADO packets
  212. Jan 1 00:12:03 pppd[189]: Timeout waiting for PADO packets
  213. Jan 1 00:13:09 pppd[189]: Unable to complete PPPoE Discovery
  214. Jan 1 00:13:09 pppd[189]: Terminating on signal 15
  215. Jan 1 00:13:09 pppd[189]: Exit.
  216. Jan 1 00:13:09 kernel: Ralink HW NAT v2.52.0 Module Disabled
  217. Jan 1 00:13:10 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
  218. Jan 1 00:13:10 RT-N56U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
  219. Jan 1 00:13:10 RT-N56U: Hardware NAT/Routing: IPv4 UDP flow offload - ON
  220. Jan 1 00:13:11 miniupnpd[205]: shutting down MiniUPnPd
  221. Jan 1 00:13:11 DHCP WAN Client: starting on eth2.2 ...
  222. Jan 1 00:13:24 detect_link: WAN port link down detected!
  223. Jan 1 00:13:32 detect_link: WAN port link restored!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!