Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 6.6.6 (root@USERNAME) (gcc (CRUX-x86_64-multilib) 12.3.0, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT_DYNAMIC Wed Dec 13 14:20:23 MSK 2023
- [ 0.000000] Command line: BOOT_IMAGE=/boot//vmlinuz-6.6.6 root=PARTUUID=45297d58-1fca-91d4-0f11-384e21f953a7 rootwait ro radeon.pcie_gen2=1 radeon.audio=1 zswap.enabled=1 selinux=0 amd_iommu=on slab_nomerge slub_debug=FZ init_on_alloc=1 init_on_free=1 pti=on oops=panic ipv6.disable=1 tsx=off mitigations=auto,nosmt consoleblank=0 console=tty12 --
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032effffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] APIC: Static calls initialized
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN53WW(V3.00) 01/08/2014
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2495.407 MHz processor
- [ 0.007772] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.007775] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.007783] last_pfn = 0x32f000 max_arch_pfn = 0x400000000
- [ 0.007790] MTRR map: 8 entries (3 fixed + 5 variable; max 20), built from 9 variable MTRRs
- [ 0.007792] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.008132] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
- [ 0.012600] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
- [ 0.012615] Kernel/User page tables isolation: force enabled on command line.
- [ 0.012616] Using GB pages for direct mapping
- [ 0.013585] ACPI: Early table checksum verification disabled
- [ 0.013591] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
- [ 0.013596] ACPI: XSDT 0x000000009FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
- [ 0.013602] ACPI: FACP 0x000000009FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013609] ACPI: DSDT 0x000000009FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013612] ACPI: FACS 0x000000009FB7C000 000040
- [ 0.013615] ACPI: SLIC 0x000000009FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013618] ACPI: UEFI 0x000000009FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013622] ACPI: HPET 0x000000009FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013625] ACPI: APIC 0x000000009FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013627] ACPI: MCFG 0x000000009FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013630] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013633] ACPI: BOOT 0x000000009FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013636] ACPI: WDRT 0x000000009FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013639] ACPI: WDAT 0x000000009FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013642] ACPI: FPDT 0x000000009FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013645] ACPI: MSDM 0x000000009FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013648] ACPI: SSDT 0x000000009FBE3000 0009F8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013651] ACPI: SSDT 0x000000009FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
- [ 0.013653] ACPI: Reserving FACP table memory at [mem 0x9fbfb000-0x9fbfb10b]
- [ 0.013655] ACPI: Reserving DSDT table memory at [mem 0x9fbea000-0x9fbf6a65]
- [ 0.013656] ACPI: Reserving FACS table memory at [mem 0x9fb7c000-0x9fb7c03f]
- [ 0.013657] ACPI: Reserving SLIC table memory at [mem 0x9fbfd000-0x9fbfd175]
- [ 0.013658] ACPI: Reserving UEFI table memory at [mem 0x9fbfc000-0x9fbfc235]
- [ 0.013659] ACPI: Reserving HPET table memory at [mem 0x9fbfa000-0x9fbfa037]
- [ 0.013660] ACPI: Reserving APIC table memory at [mem 0x9fbf9000-0x9fbf9083]
- [ 0.013661] ACPI: Reserving MCFG table memory at [mem 0x9fbf8000-0x9fbf803b]
- [ 0.013662] ACPI: Reserving ASF! table memory at [mem 0x9fbf7000-0x9fbf70a4]
- [ 0.013663] ACPI: Reserving BOOT table memory at [mem 0x9fbe9000-0x9fbe9027]
- [ 0.013664] ACPI: Reserving WDRT table memory at [mem 0x9fbe8000-0x9fbe8046]
- [ 0.013665] ACPI: Reserving WDAT table memory at [mem 0x9fbe7000-0x9fbe71ab]
- [ 0.013666] ACPI: Reserving FPDT table memory at [mem 0x9fbe5000-0x9fbe5043]
- [ 0.013667] ACPI: Reserving MSDM table memory at [mem 0x9fbe4000-0x9fbe4054]
- [ 0.013668] ACPI: Reserving SSDT table memory at [mem 0x9fbe3000-0x9fbe39f7]
- [ 0.013669] ACPI: Reserving SSDT table memory at [mem 0x9fbe1000-0x9fbe2f6d]
- [ 0.013748] Zone ranges:
- [ 0.013749] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.013751] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.013753] Normal [mem 0x0000000100000000-0x000000032effffff]
- [ 0.013754] Device empty
- [ 0.013755] Movable zone start for each node
- [ 0.013756] Early memory node ranges
- [ 0.013757] node 0: [mem 0x0000000000001000-0x000000000009efff]
- [ 0.013758] node 0: [mem 0x0000000000100000-0x000000009555dfff]
- [ 0.013760] node 0: [mem 0x0000000095d5f000-0x0000000095dbbfff]
- [ 0.013761] node 0: [mem 0x00000000966bc000-0x000000009f8befff]
- [ 0.013762] node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
- [ 0.013763] node 0: [mem 0x0000000100000000-0x000000032effffff]
- [ 0.013765] Initmem setup node 0 [mem 0x0000000000001000-0x000000032effffff]
- [ 0.013772] On node 0, zone DMA: 1 pages in unavailable ranges
- [ 0.013816] On node 0, zone DMA: 97 pages in unavailable ranges
- [ 0.024106] On node 0, zone DMA32: 2049 pages in unavailable ranges
- [ 0.024785] On node 0, zone DMA32: 2304 pages in unavailable ranges
- [ 0.024803] On node 0, zone DMA32: 832 pages in unavailable ranges
- [ 0.063863] On node 0, zone Normal: 1024 pages in unavailable ranges
- [ 0.063938] On node 0, zone Normal: 4096 pages in unavailable ranges
- [ 0.064152] ACPI: PM-Timer IO Port: 0x408
- [ 0.064157] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.064159] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.064160] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.064161] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.064169] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- [ 0.064172] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.064174] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.064178] ACPI: Using ACPI (MADT) for SMP configuration information
- [ 0.064179] ACPI: HPET id: 0x10228210 base: 0xfed00000
- [ 0.064185] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.064205] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.064208] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.064209] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.064210] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.064212] PM: hibernation: Registered nosave memory: [mem 0x9555e000-0x95d5efff]
- [ 0.064214] PM: hibernation: Registered nosave memory: [mem 0x95dbc000-0x966bbfff]
- [ 0.064216] PM: hibernation: Registered nosave memory: [mem 0x9f8bf000-0x9fabefff]
- [ 0.064216] PM: hibernation: Registered nosave memory: [mem 0x9fabf000-0x9fbbefff]
- [ 0.064217] PM: hibernation: Registered nosave memory: [mem 0x9fbbf000-0x9fbfefff]
- [ 0.064219] PM: hibernation: Registered nosave memory: [mem 0x9fc00000-0xcfffffff]
- [ 0.064220] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
- [ 0.064221] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- [ 0.064222] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
- [ 0.064223] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.064223] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
- [ 0.064224] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
- [ 0.064225] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
- [ 0.064226] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
- [ 0.064227] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
- [ 0.064227] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.064228] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
- [ 0.064229] PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffffffff]
- [ 0.064231] [mem 0xd0000000-0xf7ffffff] available for PCI devices
- [ 0.064234] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.068698] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
- [ 0.069234] percpu: Embedded 50 pages/cpu s167720 r8192 d28888 u524288
- [ 0.069242] pcpu-alloc: s167720 r8192 d28888 u524288 alloc=1*2097152
- [ 0.069246] pcpu-alloc: [0] 0 1 2 3
- [ 0.069266] Kernel command line: BOOT_IMAGE=/boot//vmlinuz-6.6.6 root=PARTUUID=45297d58-1fca-91d4-0f11-384e21f953a7 rootwait ro radeon.pcie_gen2=1 radeon.audio=1 zswap.enabled=1 selinux=0 amd_iommu=on slab_nomerge slub_debug=FZ init_on_alloc=1 init_on_free=1 pti=on oops=panic ipv6.disable=1 tsx=off mitigations=auto,nosmt consoleblank=0 console=tty12 --
- [ 0.069359] AMD-Vi: Unknown option - 'on'
- [ 0.069479] Unknown kernel command line parameters "BOOT_IMAGE=/boot//vmlinuz-6.6.6 slub_debug=FZ pti=on tsx=off", will be passed to user space.
- [ 0.069487] printk: log_buf_len individual max cpu contribution: 131072 bytes
- [ 0.069488] printk: log_buf_len total cpu_extra contributions: 393216 bytes
- [ 0.069489] printk: log_buf_len min size: 131072 bytes
- [ 0.070286] printk: log_buf_len: 524288 bytes
- [ 0.070288] printk: early log buf free: 120384(91%)
- [ 0.074707] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
- [ 0.076897] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
- [ 0.076924] Built 1 zonelists, mobility grouping on. Total pages: 2892640
- [ 0.077564] mem auto-init: stack:all(zero), heap alloc:on, heap free:on
- [ 0.077566] mem auto-init: clearing system memory may take some time...
- [ 0.077567] stackdepot: allocating hash table via alloc_large_system_hash
- [ 0.079749] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
- [ 0.079756] software IO TLB: area num 4.
- [ 2.813307] Memory: 11436356K/11754868K available (14336K kernel code, 1540K rwdata, 2932K rodata, 1372K init, 4020K bss, 318256K reserved, 0K cma-reserved)
- [ 2.813515] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 2.813842] allocated 23592960 bytes of page_ext
- [ 2.813898] Kernel/User page tables isolation: enabled
- [ 2.814079] Dynamic Preempt: full
- [ 2.814298] rcu: Preemptible hierarchical RCU implementation.
- [ 2.814299] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 2.814300] rcu: RCU priority boosting: priority 1 delay 500 ms.
- [ 2.814302] Trampoline variant of Tasks RCU enabled.
- [ 2.814302] Tracing variant of Tasks RCU enabled.
- [ 2.814303] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 2.814304] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 2.820449] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
- [ 2.820871] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 2.820966] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
- [ 2.821147] spurious 8259A interrupt: IRQ7.
- [ 2.822480] Console: colour VGA+ 80x25
- [ 2.822483] printk: console [tty12] enabled
- [ 2.825931] ACPI: Core revision 20230628
- [ 2.826329] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
- [ 2.826367] APIC: Switch to symmetric I/O mode setup
- [ 2.826857] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 2.876376] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f846fe75f, max_idle_ns: 440795226018 ns
- [ 2.876404] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.81 BogoMIPS (lpj=24954070)
- [ 2.876468] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
- [ 2.876485] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
- [ 2.876504] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
- [ 2.876526] Spectre V2 : Mitigation: Retpolines
- [ 2.876541] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 2.876560] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
- [ 2.876576] RETBleed: Vulnerable
- [ 2.876593] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
- [ 2.876617] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 2.876637] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 2.876653] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 2.876670] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 2.876686] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 2.894063] Freeing SMP alternatives memory: 32K
- [ 2.894088] pid_max: default: 32768 minimum: 301
- [ 2.894332] LSM: initializing lsm=lockdown,capability,integrity
- [ 2.894505] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 2.894530] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 3.020358] smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
- [ 3.020893] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
- [ 3.020948] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
- [ 3.021005] Performance Events: Fam15h core perfctr, AMD PMU driver.
- [ 3.021047] ... version: 0
- [ 3.021062] ... bit width: 48
- [ 3.021077] ... generic registers: 6
- [ 3.021092] ... value mask: 0000ffffffffffff
- [ 3.021108] ... max period: 00007fffffffffff
- [ 3.021123] ... fixed-purpose events: 0
- [ 3.021138] ... event mask: 000000000000003f
- [ 3.021268] signal: max sigframe size: 1776
- [ 3.021343] rcu: Hierarchical SRCU implementation.
- [ 3.021359] rcu: Max phase no-delay instances is 1000.
- [ 3.021606] MCE: In-kernel MCE decoding enabled.
- [ 3.021761] smp: Bringing up secondary CPUs ...
- [ 3.022038] smpboot: x86: Booting SMP configuration:
- [ 3.022054] .... node #0, CPUs: #2
- [ 0.015506] __common_interrupt: 2.55 No irq handler for vector
- [ 3.022242] #1 #3
- [ 0.015506] __common_interrupt: 1.55 No irq handler for vector
- [ 0.015506] __common_interrupt: 3.55 No irq handler for vector
- [ 3.022242] smp: Brought up 1 node, 4 CPUs
- [ 3.022242] smpboot: Max logical packages: 1
- [ 3.022242] smpboot: Total of 4 processors activated (19963.25 BogoMIPS)
- [ 3.027373] devtmpfs: initialized
- [ 3.027373] device: 'platform': device_add
- [ 3.027373] PM: Adding info for No Bus:platform
- [ 3.027373] bus: 'platform': registered
- [ 3.027373] bus: 'cpu': registered
- [ 3.027373] device: 'cpu': device_add
- [ 3.027373] PM: Adding info for No Bus:cpu
- [ 3.027373] x86/mm: Memory block size: 128MB
- [ 3.027373] bus: 'memory': registered
- [ 3.027373] device: 'memory': device_add
- [ 3.027373] PM: Adding info for No Bus:memory
- [ 3.027373] device: 'memory0': device_add
- [ 3.027373] bus: 'memory': add device memory0
- [ 3.027373] PM: Adding info for memory:memory0
- [ 3.027373] device: 'memory1': device_add
- [ 3.027373] bus: 'memory': add device memory1
- [ 3.027373] PM: Adding info for memory:memory1
- [ 3.027373] device: 'memory2': device_add
- [ 3.027373] bus: 'memory': add device memory2
- [ 3.027373] PM: Adding info for memory:memory2
- [ 3.027373] device: 'memory3': device_add
- [ 3.027373] bus: 'memory': add device memory3
- [ 3.027373] PM: Adding info for memory:memory3
- [ 3.027373] device: 'memory4': device_add
- [ 3.027373] bus: 'memory': add device memory4
- [ 3.027373] PM: Adding info for memory:memory4
- [ 3.027373] device: 'memory5': device_add
- [ 3.027373] bus: 'memory': add device memory5
- [ 3.027373] PM: Adding info for memory:memory5
- [ 3.027373] device: 'memory6': device_add
- [ 3.027373] bus: 'memory': add device memory6
- [ 3.027373] PM: Adding info for memory:memory6
- [ 3.027373] device: 'memory7': device_add
- [ 3.027392] bus: 'memory': add device memory7
- [ 3.027426] PM: Adding info for memory:memory7
- [ 3.027440] device: 'memory8': device_add
- [ 3.027466] bus: 'memory': add device memory8
- [ 3.027499] PM: Adding info for memory:memory8
- [ 3.027512] device: 'memory9': device_add
- [ 3.027537] bus: 'memory': add device memory9
- [ 3.027570] PM: Adding info for memory:memory9
- [ 3.027583] device: 'memory10': device_add
- [ 3.027607] bus: 'memory': add device memory10
- [ 3.027641] PM: Adding info for memory:memory10
- [ 3.027654] device: 'memory11': device_add
- [ 3.027679] bus: 'memory': add device memory11
- [ 3.027715] PM: Adding info for memory:memory11
- [ 3.027729] device: 'memory12': device_add
- [ 3.027754] bus: 'memory': add device memory12
- [ 3.027788] PM: Adding info for memory:memory12
- [ 3.027802] device: 'memory13': device_add
- [ 3.027826] bus: 'memory': add device memory13
- [ 3.027861] PM: Adding info for memory:memory13
- [ 3.027874] device: 'memory14': device_add
- [ 3.027898] bus: 'memory': add device memory14
- [ 3.027933] PM: Adding info for memory:memory14
- [ 3.027946] device: 'memory15': device_add
- [ 3.027971] bus: 'memory': add device memory15
- [ 3.028004] PM: Adding info for memory:memory15
- [ 3.028017] device: 'memory16': device_add
- [ 3.028041] bus: 'memory': add device memory16
- [ 3.028073] PM: Adding info for memory:memory16
- [ 3.028086] device: 'memory17': device_add
- [ 3.028111] bus: 'memory': add device memory17
- [ 3.028146] PM: Adding info for memory:memory17
- [ 3.028159] device: 'memory18': device_add
- [ 3.028183] bus: 'memory': add device memory18
- [ 3.028217] PM: Adding info for memory:memory18
- [ 3.028231] device: 'memory19': device_add
- [ 3.028254] bus: 'memory': add device memory19
- [ 3.028287] PM: Adding info for memory:memory19
- [ 3.028300] device: 'memory32': device_add
- [ 3.028324] bus: 'memory': add device memory32
- [ 3.028357] PM: Adding info for memory:memory32
- [ 3.028369] device: 'memory33': device_add
- [ 3.028396] bus: 'memory': add device memory33
- [ 3.028430] PM: Adding info for memory:memory33
- [ 3.028442] device: 'memory34': device_add
- [ 3.028467] bus: 'memory': add device memory34
- [ 3.028499] PM: Adding info for memory:memory34
- [ 3.028513] device: 'memory35': device_add
- [ 3.028537] bus: 'memory': add device memory35
- [ 3.028571] PM: Adding info for memory:memory35
- [ 3.028584] device: 'memory36': device_add
- [ 3.028610] bus: 'memory': add device memory36
- [ 3.028643] PM: Adding info for memory:memory36
- [ 3.028656] device: 'memory37': device_add
- [ 3.028680] bus: 'memory': add device memory37
- [ 3.028714] PM: Adding info for memory:memory37
- [ 3.028727] device: 'memory38': device_add
- [ 3.028751] bus: 'memory': add device memory38
- [ 3.028784] PM: Adding info for memory:memory38
- [ 3.028797] device: 'memory39': device_add
- [ 3.028824] bus: 'memory': add device memory39
- [ 3.028859] PM: Adding info for memory:memory39
- [ 3.028873] device: 'memory40': device_add
- [ 3.028898] bus: 'memory': add device memory40
- [ 3.028942] PM: Adding info for memory:memory40
- [ 3.028955] device: 'memory41': device_add
- [ 3.028989] bus: 'memory': add device memory41
- [ 3.029028] PM: Adding info for memory:memory41
- [ 3.029042] device: 'memory42': device_add
- [ 3.029068] bus: 'memory': add device memory42
- [ 3.029106] PM: Adding info for memory:memory42
- [ 3.029120] device: 'memory43': device_add
- [ 3.029147] bus: 'memory': add device memory43
- [ 3.029182] PM: Adding info for memory:memory43
- [ 3.029196] device: 'memory44': device_add
- [ 3.029223] bus: 'memory': add device memory44
- [ 3.029259] PM: Adding info for memory:memory44
- [ 3.029273] device: 'memory45': device_add
- [ 3.029301] bus: 'memory': add device memory45
- [ 3.029338] PM: Adding info for memory:memory45
- [ 3.029353] device: 'memory46': device_add
- [ 3.029380] bus: 'memory': add device memory46
- [ 3.029419] PM: Adding info for memory:memory46
- [ 3.029433] device: 'memory47': device_add
- [ 3.029460] bus: 'memory': add device memory47
- [ 3.029496] PM: Adding info for memory:memory47
- [ 3.029511] device: 'memory48': device_add
- [ 3.029538] bus: 'memory': add device memory48
- [ 3.029575] PM: Adding info for memory:memory48
- [ 3.029590] device: 'memory49': device_add
- [ 3.029620] bus: 'memory': add device memory49
- [ 3.029656] PM: Adding info for memory:memory49
- [ 3.029670] device: 'memory50': device_add
- [ 3.029698] bus: 'memory': add device memory50
- [ 3.029734] PM: Adding info for memory:memory50
- [ 3.029750] device: 'memory51': device_add
- [ 3.029777] bus: 'memory': add device memory51
- [ 3.029814] PM: Adding info for memory:memory51
- [ 3.029829] device: 'memory52': device_add
- [ 3.029858] bus: 'memory': add device memory52
- [ 3.029895] PM: Adding info for memory:memory52
- [ 3.029911] device: 'memory53': device_add
- [ 3.029943] bus: 'memory': add device memory53
- [ 3.029977] PM: Adding info for memory:memory53
- [ 3.029990] device: 'memory54': device_add
- [ 3.030014] bus: 'memory': add device memory54
- [ 3.030048] PM: Adding info for memory:memory54
- [ 3.030061] device: 'memory55': device_add
- [ 3.030086] bus: 'memory': add device memory55
- [ 3.030122] PM: Adding info for memory:memory55
- [ 3.030135] device: 'memory56': device_add
- [ 3.030160] bus: 'memory': add device memory56
- [ 3.030194] PM: Adding info for memory:memory56
- [ 3.030207] device: 'memory57': device_add
- [ 3.030231] bus: 'memory': add device memory57
- [ 3.030266] PM: Adding info for memory:memory57
- [ 3.030279] device: 'memory58': device_add
- [ 3.030303] bus: 'memory': add device memory58
- [ 3.030339] PM: Adding info for memory:memory58
- [ 3.030352] device: 'memory59': device_add
- [ 3.030377] bus: 'memory': add device memory59
- [ 3.030410] PM: Adding info for memory:memory59
- [ 3.030423] device: 'memory60': device_add
- [ 3.030448] bus: 'memory': add device memory60
- [ 3.030481] PM: Adding info for memory:memory60
- [ 3.030494] device: 'memory61': device_add
- [ 3.030520] bus: 'memory': add device memory61
- [ 3.030555] PM: Adding info for memory:memory61
- [ 3.030569] device: 'memory62': device_add
- [ 3.030593] bus: 'memory': add device memory62
- [ 3.030627] PM: Adding info for memory:memory62
- [ 3.030641] device: 'memory63': device_add
- [ 3.030665] bus: 'memory': add device memory63
- [ 3.030698] PM: Adding info for memory:memory63
- [ 3.030712] device: 'memory64': device_add
- [ 3.030737] bus: 'memory': add device memory64
- [ 3.030770] PM: Adding info for memory:memory64
- [ 3.030788] device: 'memory65': device_add
- [ 3.030814] bus: 'memory': add device memory65
- [ 3.030847] PM: Adding info for memory:memory65
- [ 3.030861] device: 'memory66': device_add
- [ 3.030885] bus: 'memory': add device memory66
- [ 3.030918] PM: Adding info for memory:memory66
- [ 3.030933] device: 'memory67': device_add
- [ 3.030957] bus: 'memory': add device memory67
- [ 3.030991] PM: Adding info for memory:memory67
- [ 3.031005] device: 'memory68': device_add
- [ 3.031030] bus: 'memory': add device memory68
- [ 3.031063] PM: Adding info for memory:memory68
- [ 3.031077] device: 'memory69': device_add
- [ 3.031102] bus: 'memory': add device memory69
- [ 3.031136] PM: Adding info for memory:memory69
- [ 3.031150] device: 'memory70': device_add
- [ 3.031175] bus: 'memory': add device memory70
- [ 3.031208] PM: Adding info for memory:memory70
- [ 3.031221] device: 'memory71': device_add
- [ 3.031246] bus: 'memory': add device memory71
- [ 3.031281] PM: Adding info for memory:memory71
- [ 3.031294] device: 'memory72': device_add
- [ 3.031319] bus: 'memory': add device memory72
- [ 3.031354] PM: Adding info for memory:memory72
- [ 3.031368] device: 'memory73': device_add
- [ 3.031392] bus: 'memory': add device memory73
- [ 3.031425] PM: Adding info for memory:memory73
- [ 3.031438] device: 'memory74': device_add
- [ 3.031462] bus: 'memory': add device memory74
- [ 3.031498] PM: Adding info for memory:memory74
- [ 3.031511] device: 'memory75': device_add
- [ 3.031537] bus: 'memory': add device memory75
- [ 3.031571] PM: Adding info for memory:memory75
- [ 3.031585] device: 'memory76': device_add
- [ 3.031610] bus: 'memory': add device memory76
- [ 3.031643] PM: Adding info for memory:memory76
- [ 3.031657] device: 'memory77': device_add
- [ 3.031681] bus: 'memory': add device memory77
- [ 3.031717] PM: Adding info for memory:memory77
- [ 3.031730] device: 'memory78': device_add
- [ 3.031754] bus: 'memory': add device memory78
- [ 3.031789] PM: Adding info for memory:memory78
- [ 3.031802] device: 'memory79': device_add
- [ 3.031826] bus: 'memory': add device memory79
- [ 3.031860] PM: Adding info for memory:memory79
- [ 3.031873] device: 'memory80': device_add
- [ 3.031899] bus: 'memory': add device memory80
- [ 3.031931] PM: Adding info for memory:memory80
- [ 3.031944] device: 'memory81': device_add
- [ 3.031971] bus: 'memory': add device memory81
- [ 3.032005] PM: Adding info for memory:memory81
- [ 3.032019] device: 'memory82': device_add
- [ 3.032043] bus: 'memory': add device memory82
- [ 3.032077] PM: Adding info for memory:memory82
- [ 3.032093] device: 'memory83': device_add
- [ 3.032117] bus: 'memory': add device memory83
- [ 3.032152] PM: Adding info for memory:memory83
- [ 3.032166] device: 'memory84': device_add
- [ 3.032193] bus: 'memory': add device memory84
- [ 3.032227] PM: Adding info for memory:memory84
- [ 3.032241] device: 'memory85': device_add
- [ 3.032266] bus: 'memory': add device memory85
- [ 3.032300] PM: Adding info for memory:memory85
- [ 3.032313] device: 'memory86': device_add
- [ 3.032338] bus: 'memory': add device memory86
- [ 3.032372] PM: Adding info for memory:memory86
- [ 3.032386] device: 'memory87': device_add
- [ 3.032411] bus: 'memory': add device memory87
- [ 3.032448] PM: Adding info for memory:memory87
- [ 3.032462] device: 'memory88': device_add
- [ 3.032488] bus: 'memory': add device memory88
- [ 3.032521] PM: Adding info for memory:memory88
- [ 3.032535] device: 'memory89': device_add
- [ 3.032559] bus: 'memory': add device memory89
- [ 3.032595] PM: Adding info for memory:memory89
- [ 3.032608] device: 'memory90': device_add
- [ 3.032632] bus: 'memory': add device memory90
- [ 3.032669] PM: Adding info for memory:memory90
- [ 3.032682] device: 'memory91': device_add
- [ 3.032707] bus: 'memory': add device memory91
- [ 3.032741] PM: Adding info for memory:memory91
- [ 3.032754] device: 'memory92': device_add
- [ 3.032779] bus: 'memory': add device memory92
- [ 3.032812] PM: Adding info for memory:memory92
- [ 3.032826] device: 'memory93': device_add
- [ 3.032852] bus: 'memory': add device memory93
- [ 3.032895] PM: Adding info for memory:memory93
- [ 3.032908] device: 'memory94': device_add
- [ 3.032933] bus: 'memory': add device memory94
- [ 3.032968] PM: Adding info for memory:memory94
- [ 3.032981] device: 'memory95': device_add
- [ 3.033005] bus: 'memory': add device memory95
- [ 3.033040] PM: Adding info for memory:memory95
- [ 3.033053] device: 'memory96': device_add
- [ 3.033078] bus: 'memory': add device memory96
- [ 3.033111] PM: Adding info for memory:memory96
- [ 3.033125] device: 'memory97': device_add
- [ 3.033152] bus: 'memory': add device memory97
- [ 3.033186] PM: Adding info for memory:memory97
- [ 3.033200] device: 'memory98': device_add
- [ 3.033225] bus: 'memory': add device memory98
- [ 3.033258] PM: Adding info for memory:memory98
- [ 3.033273] device: 'memory99': device_add
- [ 3.033297] bus: 'memory': add device memory99
- [ 3.033332] PM: Adding info for memory:memory99
- [ 3.033346] device: 'memory100': device_add
- [ 3.033372] bus: 'memory': add device memory100
- [ 3.033406] PM: Adding info for memory:memory100
- [ 3.033419] device: 'memory101': device_add
- [ 3.033444] bus: 'memory': add device memory101
- [ 3.033479] PM: Adding info for memory:memory101
- [ 3.033515] bus: 'container': registered
- [ 3.033520] device: 'container': device_add
- [ 3.033550] PM: Adding info for No Bus:container
- [ 3.033936] ACPI: PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
- [ 3.033936] bus: 'workqueue': registered
- [ 3.033936] device: 'workqueue': device_add
- [ 3.033936] PM: Adding info for No Bus:workqueue
- [ 3.033936] device: 'wakeup0': device_add
- [ 3.036414] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 3.036451] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 3.036719] pinctrl core: initialized pinctrl subsystem
- [ 3.036829] device class 'regulator': registering
- [ 3.036866] Registering platform device 'reg-dummy'. Parent at platform
- [ 3.036870] device: 'reg-dummy': device_add
- [ 3.036880] bus: 'platform': add device reg-dummy
- [ 3.036926] PM: Adding info for platform:reg-dummy
- [ 3.036937] bus: 'platform': add driver reg-dummy
- [ 3.036946] platform reg-dummy: probing driver reg-dummy asynchronously
- [ 3.036959] bus: 'platform': __driver_probe_device: matched device reg-dummy with driver reg-dummy
- [ 3.036963] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
- [ 3.036975] reg-dummy reg-dummy: no default pinctrl state
- [ 3.037009] device: 'regulator.0': device_add
- [ 3.037076] PM: Adding info for No Bus:regulator.0
- [ 3.037108] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
- [ 3.037117] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
- [ 3.037119] reg-dummy reg-dummy: driver reg-dummy async attach completed: 0
- [ 3.037495] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 3.038110] audit: initializing netlink subsys (disabled)
- [ 3.038152] device class 'bdi': registering
- [ 3.038152] audit: type=2000 audit(1703870410.210:1): state=initialized audit_enabled=0 res=1
- [ 3.038152] device class 'pci_bus': registering
- [ 3.038152] bus: 'pci': registered
- [ 3.038152] bus: 'pci_express': registered
- [ 3.038152] device class 'backlight': registering
- [ 3.038152] device class 'tty': registering
- [ 3.038152] device class 'vtconsole': registering
- [ 3.038152] device: 'vtcon0': device_add
- [ 3.038152] PM: Adding info for No Bus:vtcon0
- [ 3.038152] device class 'iommu': registering
- [ 3.038152] device class 'devlink': registering
- [ 3.038152] device class 'wakeup': registering
- [ 3.038152] bus: 'i2c': registered
- [ 3.038152] bus: 'i2c': add driver dummy
- [ 3.038152] thermal_sys: Registered thermal governor 'step_wise'
- [ 3.038152] device class 'thermal': registering
- [ 3.038152] cpuidle: using governor ladder
- [ 3.038152] cpuidle: using governor menu
- [ 3.038152] Simple Boot Flag at 0x44 set to 0x1
- [ 3.038152] device class 'dma': registering
- [ 3.038152] device class 'dmi': registering
- [ 3.038152] device: 'id': device_add
- [ 3.038152] PM: Adding info for No Bus:id
- [ 3.038152] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 3.038152] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as E820 entry
- [ 3.038152] PCI: Using configuration type 1 for base access
- [ 3.038152] device: 'cpu0': device_add
- [ 3.038152] bus: 'cpu': add device cpu0
- [ 3.038152] PM: Adding info for cpu:cpu0
- [ 3.038152] device: 'cpu1': device_add
- [ 3.038152] bus: 'cpu': add device cpu1
- [ 3.038152] PM: Adding info for cpu:cpu1
- [ 3.038152] device: 'cpu2': device_add
- [ 3.038152] bus: 'cpu': add device cpu2
- [ 3.038152] PM: Adding info for cpu:cpu2
- [ 3.038152] device: 'cpu3': device_add
- [ 3.038152] bus: 'cpu': add device cpu3
- [ 3.038152] PM: Adding info for cpu:cpu3
- [ 3.038152] device: 'writeback': device_add
- [ 3.038152] bus: 'workqueue': add device writeback
- [ 3.038152] PM: Adding info for workqueue:writeback
- [ 3.038152] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
- [ 3.038152] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
- [ 3.038152] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
- [ 3.038152] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
- [ 3.038152] device class 'block': registering
- [ 3.038152] device class 'graphics': registering
- [ 3.038152] device: 'fbcon': device_add
- [ 3.038152] PM: Adding info for No Bus:fbcon
- [ 3.038152] ACPI: Added _OSI(Module Device)
- [ 3.038152] ACPI: Added _OSI(Processor Device)
- [ 3.038152] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 3.038152] ACPI: Added _OSI(Processor Aggregator Device)
- [ 3.128766] ACPI: 3 ACPI AML tables successfully acquired and loaded
- [ 3.134910] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 3.138329] ACPI: _OSC evaluation for CPUs failed, trying _PDC
- [ 3.148115] ACPI: EC: EC started
- [ 3.148131] ACPI: EC: interrupt blocked
- [ 3.148623] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 3.148644] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
- [ 3.148664] ACPI: Interpreter enabled
- [ 3.148745] ACPI: PM: (supports S0 S3 S4 S5)
- [ 3.148761] ACPI: Using IOAPIC for interrupt routing
- [ 3.149896] bus: 'acpi': registered
- [ 3.149901] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 3.149921] PCI: Using E820 reservations for host bridge windows
- [ 3.151324] Registering platform device 'wdat_wdt'. Parent at platform
- [ 3.151329] device: 'wdat_wdt': device_add
- [ 3.151344] bus: 'platform': add device wdat_wdt
- [ 3.151405] PM: Adding info for platform:wdat_wdt
- [ 3.151451] ACPI: Enabled 8 GPEs in block 00 to 1F
- [ 3.151554] device: 'LNXSYSTM:00': device_add
- [ 3.151566] bus: 'acpi': add device LNXSYSTM:00
- [ 3.151604] PM: Adding info for acpi:LNXSYSTM:00
- [ 3.151735] device: 'LNXCPU:00': device_add
- [ 3.151746] bus: 'acpi': add device LNXCPU:00
- [ 3.151780] PM: Adding info for acpi:LNXCPU:00
- [ 3.151882] device: 'LNXCPU:01': device_add
- [ 3.151892] bus: 'acpi': add device LNXCPU:01
- [ 3.151929] PM: Adding info for acpi:LNXCPU:01
- [ 3.152028] device: 'LNXCPU:02': device_add
- [ 3.152038] bus: 'acpi': add device LNXCPU:02
- [ 3.152073] PM: Adding info for acpi:LNXCPU:02
- [ 3.152175] device: 'LNXCPU:03': device_add
- [ 3.152184] bus: 'acpi': add device LNXCPU:03
- [ 3.152220] PM: Adding info for acpi:LNXCPU:03
- [ 3.152446] device: 'LNXSYBUS:00': device_add
- [ 3.152455] bus: 'acpi': add device LNXSYBUS:00
- [ 3.152489] PM: Adding info for acpi:LNXSYBUS:00
- [ 3.152744] device: 'PNP0C0C:00': device_add
- [ 3.152755] bus: 'acpi': add device PNP0C0C:00
- [ 3.152792] PM: Adding info for acpi:PNP0C0C:00
- [ 3.153755] device: 'PNP0A08:00': device_add
- [ 3.153768] bus: 'acpi': add device PNP0A08:00
- [ 3.153812] PM: Adding info for acpi:PNP0A08:00
- [ 3.154416] device: 'PNP0C02:00': device_add
- [ 3.154427] bus: 'acpi': add device PNP0C02:00
- [ 3.154462] PM: Adding info for acpi:PNP0C02:00
- [ 3.154720] device: 'LNXVIDEO:00': device_add
- [ 3.154730] bus: 'acpi': add device LNXVIDEO:00
- [ 3.154765] PM: Adding info for acpi:LNXVIDEO:00
- [ 3.154986] device: 'device:00': device_add
- [ 3.154996] bus: 'acpi': add device device:00
- [ 3.155030] PM: Adding info for acpi:device:00
- [ 3.155249] device: 'device:01': device_add
- [ 3.155259] bus: 'acpi': add device device:01
- [ 3.155294] PM: Adding info for acpi:device:01
- [ 3.155498] device: 'LNXVIDEO:01': device_add
- [ 3.155508] bus: 'acpi': add device LNXVIDEO:01
- [ 3.155541] PM: Adding info for acpi:LNXVIDEO:01
- [ 3.155749] device: 'device:02': device_add
- [ 3.155770] bus: 'acpi': add device device:02
- [ 3.155806] PM: Adding info for acpi:device:02
- [ 3.156046] device: 'device:03': device_add
- [ 3.156056] bus: 'acpi': add device device:03
- [ 3.156096] PM: Adding info for acpi:device:03
- [ 3.156321] device: 'device:04': device_add
- [ 3.156331] bus: 'acpi': add device device:04
- [ 3.156371] PM: Adding info for acpi:device:04
- [ 3.156623] device: 'LNXVIDEO:02': device_add
- [ 3.156634] bus: 'acpi': add device LNXVIDEO:02
- [ 3.156672] PM: Adding info for acpi:LNXVIDEO:02
- [ 3.156896] device: 'device:05': device_add
- [ 3.156905] bus: 'acpi': add device device:05
- [ 3.156943] PM: Adding info for acpi:device:05
- [ 3.157146] device: 'device:06': device_add
- [ 3.157155] bus: 'acpi': add device device:06
- [ 3.157190] PM: Adding info for acpi:device:06
- [ 3.157978] device: 'device:07': device_add
- [ 3.157989] bus: 'acpi': add device device:07
- [ 3.158025] PM: Adding info for acpi:device:07
- [ 3.158228] device: 'device:08': device_add
- [ 3.158238] bus: 'acpi': add device device:08
- [ 3.158272] PM: Adding info for acpi:device:08
- [ 3.158987] device: 'device:09': device_add
- [ 3.158997] bus: 'acpi': add device device:09
- [ 3.159035] PM: Adding info for acpi:device:09
- [ 3.159238] device: 'device:0a': device_add
- [ 3.159248] bus: 'acpi': add device device:0a
- [ 3.159283] PM: Adding info for acpi:device:0a
- [ 3.159999] device: 'device:0b': device_add
- [ 3.160010] bus: 'acpi': add device device:0b
- [ 3.160046] PM: Adding info for acpi:device:0b
- [ 3.160288] device: 'device:0c': device_add
- [ 3.160298] bus: 'acpi': add device device:0c
- [ 3.160333] PM: Adding info for acpi:device:0c
- [ 3.160552] device: 'device:0d': device_add
- [ 3.160562] bus: 'acpi': add device device:0d
- [ 3.160604] PM: Adding info for acpi:device:0d
- [ 3.161395] device: 'device:0e': device_add
- [ 3.161405] bus: 'acpi': add device device:0e
- [ 3.161439] PM: Adding info for acpi:device:0e
- [ 3.161640] device: 'device:0f': device_add
- [ 3.161650] bus: 'acpi': add device device:0f
- [ 3.161684] PM: Adding info for acpi:device:0f
- [ 3.161922] device: 'device:10': device_add
- [ 3.161931] bus: 'acpi': add device device:10
- [ 3.161965] PM: Adding info for acpi:device:10
- [ 3.162157] device: 'device:11': device_add
- [ 3.162166] bus: 'acpi': add device device:11
- [ 3.162204] PM: Adding info for acpi:device:11
- [ 3.162444] device: 'device:12': device_add
- [ 3.162454] bus: 'acpi': add device device:12
- [ 3.162488] PM: Adding info for acpi:device:12
- [ 3.162683] device: 'device:13': device_add
- [ 3.162692] bus: 'acpi': add device device:13
- [ 3.162727] PM: Adding info for acpi:device:13
- [ 3.162964] device: 'device:14': device_add
- [ 3.162973] bus: 'acpi': add device device:14
- [ 3.163007] PM: Adding info for acpi:device:14
- [ 3.163200] device: 'device:15': device_add
- [ 3.163210] bus: 'acpi': add device device:15
- [ 3.163248] PM: Adding info for acpi:device:15
- [ 3.163489] device: 'device:16': device_add
- [ 3.163499] bus: 'acpi': add device device:16
- [ 3.163538] PM: Adding info for acpi:device:16
- [ 3.163775] device: 'device:17': device_add
- [ 3.163786] bus: 'acpi': add device device:17
- [ 3.163829] PM: Adding info for acpi:device:17
- [ 3.164597] device: 'PNP0103:00': device_add
- [ 3.164612] bus: 'acpi': add device PNP0103:00
- [ 3.164656] PM: Adding info for acpi:PNP0103:00
- [ 3.164919] device: 'device:18': device_add
- [ 3.164933] bus: 'acpi': add device device:18
- [ 3.164980] PM: Adding info for acpi:device:18
- [ 3.165286] device: 'device:19': device_add
- [ 3.165298] bus: 'acpi': add device device:19
- [ 3.165342] PM: Adding info for acpi:device:19
- [ 3.166379] device: 'device:1a': device_add
- [ 3.166430] bus: 'acpi': add device device:1a
- [ 3.166479] PM: Adding info for acpi:device:1a
- [ 3.166759] device: 'device:1b': device_add
- [ 3.166771] bus: 'acpi': add device device:1b
- [ 3.166813] PM: Adding info for acpi:device:1b
- [ 3.167032] device: 'device:1c': device_add
- [ 3.167043] bus: 'acpi': add device device:1c
- [ 3.167083] PM: Adding info for acpi:device:1c
- [ 3.167276] device: 'device:1d': device_add
- [ 3.167286] bus: 'acpi': add device device:1d
- [ 3.167321] PM: Adding info for acpi:device:1d
- [ 3.167590] device: 'device:1e': device_add
- [ 3.167601] bus: 'acpi': add device device:1e
- [ 3.167635] PM: Adding info for acpi:device:1e
- [ 3.167894] device: 'device:1f': device_add
- [ 3.167904] bus: 'acpi': add device device:1f
- [ 3.167938] PM: Adding info for acpi:device:1f
- [ 3.168195] device: 'device:20': device_add
- [ 3.168206] bus: 'acpi': add device device:20
- [ 3.168242] PM: Adding info for acpi:device:20
- [ 3.169006] device: 'device:21': device_add
- [ 3.169017] bus: 'acpi': add device device:21
- [ 3.169051] PM: Adding info for acpi:device:21
- [ 3.169244] device: 'device:22': device_add
- [ 3.169255] bus: 'acpi': add device device:22
- [ 3.169290] PM: Adding info for acpi:device:22
- [ 3.169546] device: 'device:23': device_add
- [ 3.169556] bus: 'acpi': add device device:23
- [ 3.169590] PM: Adding info for acpi:device:23
- [ 3.170340] device: 'device:24': device_add
- [ 3.170352] bus: 'acpi': add device device:24
- [ 3.170398] PM: Adding info for acpi:device:24
- [ 3.171228] device: 'device:25': device_add
- [ 3.171239] bus: 'acpi': add device device:25
- [ 3.171277] PM: Adding info for acpi:device:25
- [ 3.171489] device: 'device:26': device_add
- [ 3.171499] bus: 'acpi': add device device:26
- [ 3.171534] PM: Adding info for acpi:device:26
- [ 3.171791] device: 'device:27': device_add
- [ 3.171800] bus: 'acpi': add device device:27
- [ 3.171834] PM: Adding info for acpi:device:27
- [ 3.172092] device: 'device:28': device_add
- [ 3.172103] bus: 'acpi': add device device:28
- [ 3.172140] PM: Adding info for acpi:device:28
- [ 3.172333] device: 'device:29': device_add
- [ 3.172342] bus: 'acpi': add device device:29
- [ 3.172377] PM: Adding info for acpi:device:29
- [ 3.172570] device: 'device:2a': device_add
- [ 3.172580] bus: 'acpi': add device device:2a
- [ 3.172615] PM: Adding info for acpi:device:2a
- [ 3.172806] device: 'device:2b': device_add
- [ 3.172816] bus: 'acpi': add device device:2b
- [ 3.172851] PM: Adding info for acpi:device:2b
- [ 3.173041] device: 'device:2c': device_add
- [ 3.173051] bus: 'acpi': add device device:2c
- [ 3.173087] PM: Adding info for acpi:device:2c
- [ 3.173341] device: 'device:2d': device_add
- [ 3.173351] bus: 'acpi': add device device:2d
- [ 3.173386] PM: Adding info for acpi:device:2d
- [ 3.173597] device: 'device:2e': device_add
- [ 3.173608] bus: 'acpi': add device device:2e
- [ 3.173642] PM: Adding info for acpi:device:2e
- [ 3.173849] device: 'device:2f': device_add
- [ 3.173858] bus: 'acpi': add device device:2f
- [ 3.173893] PM: Adding info for acpi:device:2f
- [ 3.174151] device: 'device:30': device_add
- [ 3.174162] bus: 'acpi': add device device:30
- [ 3.174198] PM: Adding info for acpi:device:30
- [ 3.174390] device: 'device:31': device_add
- [ 3.174400] bus: 'acpi': add device device:31
- [ 3.174433] PM: Adding info for acpi:device:31
- [ 3.174625] device: 'device:32': device_add
- [ 3.174635] bus: 'acpi': add device device:32
- [ 3.174669] PM: Adding info for acpi:device:32
- [ 3.174922] device: 'device:33': device_add
- [ 3.174931] bus: 'acpi': add device device:33
- [ 3.174965] PM: Adding info for acpi:device:33
- [ 3.175655] device: 'device:34': device_add
- [ 3.175666] bus: 'acpi': add device device:34
- [ 3.175709] PM: Adding info for acpi:device:34
- [ 3.176915] device: 'device:35': device_add
- [ 3.176925] bus: 'acpi': add device device:35
- [ 3.176961] PM: Adding info for acpi:device:35
- [ 3.177651] device: 'device:36': device_add
- [ 3.177662] bus: 'acpi': add device device:36
- [ 3.177696] PM: Adding info for acpi:device:36
- [ 3.177891] device: 'device:37': device_add
- [ 3.177901] bus: 'acpi': add device device:37
- [ 3.177934] PM: Adding info for acpi:device:37
- [ 3.178126] device: 'device:38': device_add
- [ 3.178136] bus: 'acpi': add device device:38
- [ 3.178172] PM: Adding info for acpi:device:38
- [ 3.178365] device: 'device:39': device_add
- [ 3.178374] bus: 'acpi': add device device:39
- [ 3.178408] PM: Adding info for acpi:device:39
- [ 3.178684] device: 'device:3a': device_add
- [ 3.178694] bus: 'acpi': add device device:3a
- [ 3.178727] PM: Adding info for acpi:device:3a
- [ 3.179216] device: 'SMB0001:00': device_add
- [ 3.179225] bus: 'acpi': add device SMB0001:00
- [ 3.179259] PM: Adding info for acpi:SMB0001:00
- [ 3.179473] device: 'device:3b': device_add
- [ 3.179483] bus: 'acpi': add device device:3b
- [ 3.179519] PM: Adding info for acpi:device:3b
- [ 3.179733] device: 'PNP0200:00': device_add
- [ 3.179742] bus: 'acpi': add device PNP0200:00
- [ 3.179775] PM: Adding info for acpi:PNP0200:00
- [ 3.179998] device: 'PNP0C04:00': device_add
- [ 3.180007] bus: 'acpi': add device PNP0C04:00
- [ 3.180040] PM: Adding info for acpi:PNP0C04:00
- [ 3.180261] device: 'PNP0000:00': device_add
- [ 3.180271] bus: 'acpi': add device PNP0000:00
- [ 3.180304] PM: Adding info for acpi:PNP0000:00
- [ 3.180737] device: 'PNP0B00:00': device_add
- [ 3.180751] bus: 'acpi': add device PNP0B00:00
- [ 3.180789] PM: Adding info for acpi:PNP0B00:00
- [ 3.181026] device: 'PNP0800:00': device_add
- [ 3.181037] bus: 'acpi': add device PNP0800:00
- [ 3.181076] PM: Adding info for acpi:PNP0800:00
- [ 3.181464] device: 'PNP0100:00': device_add
- [ 3.181473] bus: 'acpi': add device PNP0100:00
- [ 3.181507] PM: Adding info for acpi:PNP0100:00
- [ 3.181828] device: 'MSF0001:00': device_add
- [ 3.181838] bus: 'acpi': add device MSF0001:00
- [ 3.181875] PM: Adding info for acpi:MSF0001:00
- [ 3.182199] device: 'ETD061B:00': device_add
- [ 3.182210] bus: 'acpi': add device ETD061B:00
- [ 3.182244] PM: Adding info for acpi:ETD061B:00
- [ 3.182582] device: 'SYN2B20:00': device_add
- [ 3.182592] bus: 'acpi': add device SYN2B20:00
- [ 3.182627] PM: Adding info for acpi:SYN2B20:00
- [ 3.182969] device: 'SYN2B21:00': device_add
- [ 3.182980] bus: 'acpi': add device SYN2B21:00
- [ 3.183013] PM: Adding info for acpi:SYN2B21:00
- [ 3.183344] device: 'PNP0F13:00': device_add
- [ 3.183354] bus: 'acpi': add device PNP0F13:00
- [ 3.183390] PM: Adding info for acpi:PNP0F13:00
- [ 3.183614] device: 'PNP0C02:01': device_add
- [ 3.183624] bus: 'acpi': add device PNP0C02:01
- [ 3.183657] PM: Adding info for acpi:PNP0C02:01
- [ 3.184099] device: 'PNP0C01:00': device_add
- [ 3.184110] bus: 'acpi': add device PNP0C01:00
- [ 3.184143] PM: Adding info for acpi:PNP0C01:00
- [ 3.184413] device: 'PNP0C09:00': device_add
- [ 3.184422] bus: 'acpi': add device PNP0C09:00
- [ 3.184457] PM: Adding info for acpi:PNP0C09:00
- [ 3.184815] device: 'VPC2004:00': device_add
- [ 3.184828] bus: 'acpi': add device VPC2004:00
- [ 3.184861] PM: Adding info for acpi:VPC2004:00
- [ 3.196978] device: 'PNP0C0A:00': device_add
- [ 3.197003] bus: 'acpi': add device PNP0C0A:00
- [ 3.197047] PM: Adding info for acpi:PNP0C0A:00
- [ 3.197309] device: 'ACPI0003:00': device_add
- [ 3.197319] bus: 'acpi': add device ACPI0003:00
- [ 3.197352] PM: Adding info for acpi:ACPI0003:00
- [ 3.198128] device: 'device:3c': device_add
- [ 3.198138] bus: 'acpi': add device device:3c
- [ 3.198180] PM: Adding info for acpi:device:3c
- [ 3.198392] device: 'device:3d': device_add
- [ 3.198402] bus: 'acpi': add device device:3d
- [ 3.198436] PM: Adding info for acpi:device:3d
- [ 3.198695] device: 'device:3e': device_add
- [ 3.198704] bus: 'acpi': add device device:3e
- [ 3.198740] PM: Adding info for acpi:device:3e
- [ 3.199319] device: 'device:3f': device_add
- [ 3.199329] bus: 'acpi': add device device:3f
- [ 3.199364] PM: Adding info for acpi:device:3f
- [ 3.199931] device: 'device:40': device_add
- [ 3.199941] bus: 'acpi': add device device:40
- [ 3.199983] PM: Adding info for acpi:device:40
- [ 3.200224] device: 'device:41': device_add
- [ 3.200234] bus: 'acpi': add device device:41
- [ 3.200268] PM: Adding info for acpi:device:41
- [ 3.200894] device: 'device:42': device_add
- [ 3.200905] bus: 'acpi': add device device:42
- [ 3.200942] PM: Adding info for acpi:device:42
- [ 3.201530] device: 'device:43': device_add
- [ 3.201541] bus: 'acpi': add device device:43
- [ 3.201576] PM: Adding info for acpi:device:43
- [ 3.201865] device: 'device:44': device_add
- [ 3.201875] bus: 'acpi': add device device:44
- [ 3.201911] PM: Adding info for acpi:device:44
- [ 3.202106] device: 'device:45': device_add
- [ 3.202116] bus: 'acpi': add device device:45
- [ 3.202149] PM: Adding info for acpi:device:45
- [ 3.202559] device: 'device:46': device_add
- [ 3.202569] bus: 'acpi': add device device:46
- [ 3.202602] PM: Adding info for acpi:device:46
- [ 3.202831] device: 'device:47': device_add
- [ 3.202841] bus: 'acpi': add device device:47
- [ 3.202875] PM: Adding info for acpi:device:47
- [ 3.203065] device: 'device:48': device_add
- [ 3.203077] bus: 'acpi': add device device:48
- [ 3.203110] PM: Adding info for acpi:device:48
- [ 3.203303] device: 'device:49': device_add
- [ 3.203312] bus: 'acpi': add device device:49
- [ 3.203347] PM: Adding info for acpi:device:49
- [ 3.203552] device: 'device:4a': device_add
- [ 3.203562] bus: 'acpi': add device device:4a
- [ 3.203595] PM: Adding info for acpi:device:4a
- [ 3.203787] device: 'device:4b': device_add
- [ 3.203797] bus: 'acpi': add device device:4b
- [ 3.203833] PM: Adding info for acpi:device:4b
- [ 3.204022] device: 'device:4c': device_add
- [ 3.204034] bus: 'acpi': add device device:4c
- [ 3.204067] PM: Adding info for acpi:device:4c
- [ 3.204256] device: 'device:4d': device_add
- [ 3.204265] bus: 'acpi': add device device:4d
- [ 3.204299] PM: Adding info for acpi:device:4d
- [ 3.204488] device: 'device:4e': device_add
- [ 3.204497] bus: 'acpi': add device device:4e
- [ 3.204530] PM: Adding info for acpi:device:4e
- [ 3.204720] device: 'device:4f': device_add
- [ 3.204729] bus: 'acpi': add device device:4f
- [ 3.204763] PM: Adding info for acpi:device:4f
- [ 3.205255] device: 'PNP0C0F:00': device_add
- [ 3.205268] bus: 'acpi': add device PNP0C0F:00
- [ 3.205302] PM: Adding info for acpi:PNP0C0F:00
- [ 3.205786] device: 'PNP0C0F:01': device_add
- [ 3.205796] bus: 'acpi': add device PNP0C0F:01
- [ 3.205834] PM: Adding info for acpi:PNP0C0F:01
- [ 3.206323] device: 'PNP0C0F:02': device_add
- [ 3.206426] bus: 'acpi': add device PNP0C0F:02
- [ 3.206464] PM: Adding info for acpi:PNP0C0F:02
- [ 3.206967] device: 'PNP0C0F:03': device_add
- [ 3.206976] bus: 'acpi': add device PNP0C0F:03
- [ 3.207014] PM: Adding info for acpi:PNP0C0F:03
- [ 3.207461] device: 'PNP0C0F:04': device_add
- [ 3.207471] bus: 'acpi': add device PNP0C0F:04
- [ 3.207505] PM: Adding info for acpi:PNP0C0F:04
- [ 3.207969] device: 'PNP0C0F:05': device_add
- [ 3.207979] bus: 'acpi': add device PNP0C0F:05
- [ 3.208013] PM: Adding info for acpi:PNP0C0F:05
- [ 3.208462] device: 'PNP0C0F:06': device_add
- [ 3.208472] bus: 'acpi': add device PNP0C0F:06
- [ 3.208507] PM: Adding info for acpi:PNP0C0F:06
- [ 3.208971] device: 'PNP0C0F:07': device_add
- [ 3.208981] bus: 'acpi': add device PNP0C0F:07
- [ 3.209014] PM: Adding info for acpi:PNP0C0F:07
- [ 3.209264] device: 'PNP0C0E:00': device_add
- [ 3.209274] bus: 'acpi': add device PNP0C0E:00
- [ 3.209308] PM: Adding info for acpi:PNP0C0E:00
- [ 3.209598] device: 'PNP0C0D:00': device_add
- [ 3.209608] bus: 'acpi': add device PNP0C0D:00
- [ 3.209670] PM: Adding info for acpi:PNP0C0D:00
- [ 3.209907] device: 'LNXSYBUS:01': device_add
- [ 3.209917] bus: 'acpi': add device LNXSYBUS:01
- [ 3.209950] PM: Adding info for acpi:LNXSYBUS:01
- [ 3.210126] Registering platform device 'acpi-cpufreq'. Parent at platform
- [ 3.210130] device: 'acpi-cpufreq': device_add
- [ 3.210139] bus: 'platform': add device acpi-cpufreq
- [ 3.210180] PM: Adding info for platform:acpi-cpufreq
- [ 3.210429] Registering platform device 'PNP0C0C:00'. Parent at platform
- [ 3.210433] device: 'PNP0C0C:00': device_add
- [ 3.210475] bus: 'platform': add device PNP0C0C:00
- [ 3.210521] PM: Adding info for platform:PNP0C0C:00
- [ 3.211256] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 3.211291] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- [ 3.211344] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR]
- [ 3.211362] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER PCIeCapability LTR]
- [ 3.211391] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
- [ 3.211416] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 3.212119] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
- [ 3.212161] device: 'pci0000:00': device_add
- [ 3.212217] PM: Adding info for No Bus:pci0000:00
- [ 3.212353] device: '0000:00': device_add
- [ 3.212412] PM: Adding info for No Bus:0000:00
- [ 3.212918] PCI host bridge to bus 0000:00
- [ 3.212937] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 3.212957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 3.212976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 3.212999] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cbfff window]
- [ 3.213024] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
- [ 3.213046] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
- [ 3.213068] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
- [ 3.213091] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
- [ 3.213113] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.213175] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
- [ 3.213235] device: '0000:00:00.0': device_add
- [ 3.213254] bus: 'pci': add device 0000:00:00.0
- [ 3.213347] PM: Adding info for pci:0000:00:00.0
- [ 3.213384] pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
- [ 3.213407] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
- [ 3.213427] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
- [ 3.213447] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
- [ 3.213479] pci 0000:00:01.0: enabling Extended Tags
- [ 3.213513] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 3.213554] pci 0000:00:01.0: supports D1 D2
- [ 3.213585] device: '0000:00:01.0': device_add
- [ 3.213648] device: 'wakeup1': device_add
- [ 3.213737] bus: 'pci': add device 0000:00:01.0
- [ 3.213923] PM: Adding info for pci:0000:00:01.0
- [ 3.213949] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
- [ 3.213973] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
- [ 3.214011] pci 0000:00:01.1: enabling Extended Tags
- [ 3.214060] pci 0000:00:01.1: supports D1 D2
- [ 3.214085] device: '0000:00:01.1': device_add
- [ 3.214111] bus: 'pci': add device 0000:00:01.1
- [ 3.214207] PM: Adding info for pci:0000:00:01.1
- [ 3.214237] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
- [ 3.215022] pci 0000:00:02.0: enabling Extended Tags
- [ 3.215076] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 3.215109] device: '0000:00:02.0': device_add
- [ 3.215165] device: 'wakeup2': device_add
- [ 3.215257] bus: 'pci': add device 0000:00:02.0
- [ 3.215462] PM: Adding info for pci:0000:00:02.0
- [ 3.215505] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
- [ 3.215541] pci 0000:00:04.0: enabling Extended Tags
- [ 3.215595] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 3.215627] device: '0000:00:04.0': device_add
- [ 3.215685] device: 'wakeup3': device_add
- [ 3.215784] bus: 'pci': add device 0000:00:04.0
- [ 3.216019] PM: Adding info for pci:0000:00:04.0
- [ 3.216047] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
- [ 3.216085] pci 0000:00:05.0: enabling Extended Tags
- [ 3.216142] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
- [ 3.216175] device: '0000:00:05.0': device_add
- [ 3.216236] device: 'wakeup4': device_add
- [ 3.216332] bus: 'pci': add device 0000:00:05.0
- [ 3.217387] PM: Adding info for pci:0000:00:05.0
- [ 3.217443] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
- [ 3.217480] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
- [ 3.217613] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
- [ 3.217664] device: '0000:00:10.0': device_add
- [ 3.217724] device: 'wakeup5': device_add
- [ 3.217810] bus: 'pci': add device 0000:00:10.0
- [ 3.218062] PM: Adding info for pci:0000:00:10.0
- [ 3.218113] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
- [ 3.218142] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
- [ 3.218165] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
- [ 3.218188] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
- [ 3.218211] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
- [ 3.218234] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
- [ 3.218256] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
- [ 3.218331] device: '0000:00:11.0': device_add
- [ 3.218386] device: 'wakeup6': device_add
- [ 3.218459] bus: 'pci': add device 0000:00:11.0
- [ 3.218636] PM: Adding info for pci:0000:00:11.0
- [ 3.218714] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
- [ 3.218744] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
- [ 3.218826] device: '0000:00:12.0': device_add
- [ 3.218881] device: 'wakeup7': device_add
- [ 3.218955] bus: 'pci': add device 0000:00:12.0
- [ 3.219155] PM: Adding info for pci:0000:00:12.0
- [ 3.219238] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
- [ 3.219993] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
- [ 3.221986] pci 0000:00:12.2: supports D1 D2
- [ 3.222003] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 3.222038] device: '0000:00:12.2': device_add
- [ 3.222100] device: 'wakeup8': device_add
- [ 3.222180] bus: 'pci': add device 0000:00:12.2
- [ 3.222407] PM: Adding info for pci:0000:00:12.2
- [ 3.222457] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
- [ 3.222486] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
- [ 3.222569] device: '0000:00:13.0': device_add
- [ 3.222626] device: 'wakeup9': device_add
- [ 3.222701] bus: 'pci': add device 0000:00:13.0
- [ 3.222903] PM: Adding info for pci:0000:00:13.0
- [ 3.222981] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
- [ 3.223724] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
- [ 3.225727] pci 0000:00:13.2: supports D1 D2
- [ 3.225744] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 3.225779] device: '0000:00:13.2': device_add
- [ 3.225840] device: 'wakeup10': device_add
- [ 3.225920] bus: 'pci': add device 0000:00:13.2
- [ 3.226144] PM: Adding info for pci:0000:00:13.2
- [ 3.226220] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
- [ 3.226319] device: '0000:00:14.0': device_add
- [ 3.226377] device: 'wakeup11': device_add
- [ 3.226479] bus: 'pci': add device 0000:00:14.0
- [ 3.226666] PM: Adding info for pci:0000:00:14.0
- [ 3.226742] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
- [ 3.226775] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
- [ 3.226856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 3.226888] device: '0000:00:14.2': device_add
- [ 3.226945] device: 'wakeup12': device_add
- [ 3.227018] bus: 'pci': add device 0000:00:14.2
- [ 3.227226] PM: Adding info for pci:0000:00:14.2
- [ 3.227296] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
- [ 3.227391] device: '0000:00:14.3': device_add
- [ 3.227446] device: 'wakeup13': device_add
- [ 3.227520] bus: 'pci': add device 0000:00:14.3
- [ 3.227695] PM: Adding info for pci:0000:00:14.3
- [ 3.227790] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
- [ 3.227861] device: '0000:00:14.4': device_add
- [ 3.227916] device: 'wakeup14': device_add
- [ 3.227995] bus: 'pci': add device 0000:00:14.4
- [ 3.228196] PM: Adding info for pci:0000:00:14.4
- [ 3.228268] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
- [ 3.228315] device: '0000:00:18.0': device_add
- [ 3.228332] bus: 'pci': add device 0000:00:18.0
- [ 3.228421] PM: Adding info for pci:0000:00:18.0
- [ 3.228441] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
- [ 3.228486] device: '0000:00:18.1': device_add
- [ 3.228503] bus: 'pci': add device 0000:00:18.1
- [ 3.228589] PM: Adding info for pci:0000:00:18.1
- [ 3.228610] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
- [ 3.228655] device: '0000:00:18.2': device_add
- [ 3.228672] bus: 'pci': add device 0000:00:18.2
- [ 3.228759] PM: Adding info for pci:0000:00:18.2
- [ 3.228780] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
- [ 3.228829] device: '0000:00:18.3': device_add
- [ 3.228846] bus: 'pci': add device 0000:00:18.3
- [ 3.228931] PM: Adding info for pci:0000:00:18.3
- [ 3.228952] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
- [ 3.228997] device: '0000:00:18.4': device_add
- [ 3.229014] bus: 'pci': add device 0000:00:18.4
- [ 3.229102] PM: Adding info for pci:0000:00:18.4
- [ 3.229124] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
- [ 3.229168] device: '0000:00:18.5': device_add
- [ 3.229185] bus: 'pci': add device 0000:00:18.5
- [ 3.229274] PM: Adding info for pci:0000:00:18.5
- [ 3.229352] device: '0000:01': device_add
- [ 3.229409] PM: Adding info for No Bus:0000:01
- [ 3.229483] pci 0000:01:00.0: [1002:6665] type 00 class 0x038000
- [ 3.229515] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 3.229544] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
- [ 3.229566] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
- [ 3.229592] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 3.229615] pci 0000:01:00.0: enabling Extended Tags
- [ 3.229708] pci 0000:01:00.0: supports D1 D2
- [ 3.229724] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
- [ 3.229774] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:02.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
- [ 3.229815] device: '0000:01:00.0': device_add
- [ 3.229876] device: 'wakeup15': device_add
- [ 3.229969] bus: 'pci': add device 0000:01:00.0
- [ 3.230195] PM: Adding info for pci:0000:01:00.0
- [ 3.256865] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 3.256907] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
- [ 3.256926] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 3.256948] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 3.257011] device: '0000:02': device_add
- [ 3.257086] PM: Adding info for No Bus:0000:02
- [ 3.257171] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
- [ 3.257214] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
- [ 3.257244] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
- [ 3.257337] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
- [ 3.257415] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 3.257478] device: '0000:02:00.0': device_add
- [ 3.257556] device: 'wakeup16': device_add
- [ 3.257668] bus: 'pci': add device 0000:02:00.0
- [ 3.257916] PM: Adding info for pci:0000:02:00.0
- [ 3.286453] pci 0000:00:04.0: PCI bridge to [bus 02]
- [ 3.286482] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
- [ 3.286500] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 3.286555] device: '0000:03': device_add
- [ 3.286622] PM: Adding info for No Bus:0000:03
- [ 3.286753] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
- [ 3.286803] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
- [ 3.286870] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
- [ 3.287042] pci 0000:03:00.0: supports D1 D2
- [ 3.287059] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 3.287172] device: '0000:03:00.0': device_add
- [ 3.287245] device: 'wakeup17': device_add
- [ 3.287342] bus: 'pci': add device 0000:03:00.0
- [ 3.287589] PM: Adding info for pci:0000:03:00.0
- [ 3.316492] pci 0000:00:05.0: PCI bridge to [bus 03]
- [ 3.316522] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
- [ 3.316613] pci_bus 0000:04: extended config space not accessible
- [ 3.316636] device: '0000:04': device_add
- [ 3.316708] PM: Adding info for No Bus:0000:04
- [ 3.316784] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
- [ 3.316812] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
- [ 3.316836] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 3.316858] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 3.316881] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000cbfff window] (subtractive decode)
- [ 3.316904] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000effff window] (subtractive decode)
- [ 3.316926] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff window] (subtractive decode)
- [ 3.316949] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
- [ 3.316971] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
- [ 3.317054] pci_bus 0000:00: on NUMA node 0
- [ 3.317084] device: 'wakeup18': device_add
- [ 3.318088] Registering platform device 'PNP0103:00'. Parent at pci0000:00
- [ 3.318092] device: 'PNP0103:00': device_add
- [ 3.318122] bus: 'platform': add device PNP0103:00
- [ 3.318162] PM: Adding info for platform:PNP0103:00
- [ 3.318674] Registering platform device 'PNP0C04:00'. Parent at 0000:00:14.3
- [ 3.318679] device: 'PNP0C04:00': device_add
- [ 3.318708] bus: 'platform': add device PNP0C04:00
- [ 3.318750] PM: Adding info for platform:PNP0C04:00
- [ 3.318844] Registering platform device 'PNP0800:00'. Parent at 0000:00:14.3
- [ 3.318847] device: 'PNP0800:00': device_add
- [ 3.318876] bus: 'platform': add device PNP0800:00
- [ 3.318920] PM: Adding info for platform:PNP0800:00
- [ 3.319432] Registering platform device 'PNP0C09:00'. Parent at 0000:00:14.3
- [ 3.319437] device: 'PNP0C09:00': device_add
- [ 3.319468] bus: 'platform': add device PNP0C09:00
- [ 3.319509] PM: Adding info for platform:PNP0C09:00
- [ 3.319593] Registering platform device 'VPC2004:00'. Parent at PNP0C09:00
- [ 3.319596] device: 'VPC2004:00': device_add
- [ 3.319623] bus: 'platform': add device VPC2004:00
- [ 3.319659] PM: Adding info for platform:VPC2004:00
- [ 3.346543] Registering platform device 'PNP0C0A:00'. Parent at 0000:00:14.3
- [ 3.346554] device: 'PNP0C0A:00': device_add
- [ 3.346595] bus: 'platform': add device PNP0C0A:00
- [ 3.346646] PM: Adding info for platform:PNP0C0A:00
- [ 3.346691] Registering platform device 'ACPI0003:00'. Parent at 0000:00:14.3
- [ 3.346694] device: 'ACPI0003:00': device_add
- [ 3.346720] bus: 'platform': add device ACPI0003:00
- [ 3.346759] PM: Adding info for platform:ACPI0003:00
- [ 3.348805] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
- [ 3.356402] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
- [ 3.356402] Registering platform device 'PNP0C0D:00'. Parent at platform
- [ 3.356402] device: 'PNP0C0D:00': device_add
- [ 3.356402] bus: 'platform': add device PNP0C0D:00
- [ 3.356402] PM: Adding info for platform:PNP0C0D:00
- [ 3.356402] device: 'LNXPWRBN:00': device_add
- [ 3.356402] bus: 'acpi': add device LNXPWRBN:00
- [ 3.356402] PM: Adding info for acpi:LNXPWRBN:00
- [ 3.356402] device: 'wakeup19': device_add
- [ 3.356402] bus: 'acpi': add driver ec
- [ 3.356402] bus: 'acpi': __driver_probe_device: matched device PNP0C09:00 with driver ec
- [ 3.356402] bus: 'acpi': really_probe: probing driver ec with device PNP0C09:00
- [ 3.356402] ec PNP0C09:00: no default pinctrl state
- [ 3.356402] ACPI: EC: interrupt unblocked
- [ 3.356402] ACPI: EC: event unblocked
- [ 3.356402] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 3.356402] ACPI: EC: GPE=0x3
- [ 3.356402] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
- [ 3.356402] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
- [ 3.356402] driver: 'ec': driver_bound: bound to device 'PNP0C09:00'
- [ 3.356402] bus: 'acpi': really_probe: bound device PNP0C09:00 to driver ec
- [ 3.356463] device: 'wakeup20': device_add
- [ 3.356463] bus: 'pnp': registered
- [ 3.356463] device class 'misc': registering
- [ 3.356463] iommu: Default domain type: Translated
- [ 3.356463] iommu: DMA domain TLB invalidation policy: lazy mode
- [ 3.356463] bus: 'dax': registered
- [ 3.356463] device class 'dma_heap': registering
- [ 3.356467] device class 'scsi_host': registering
- [ 3.356467] bus: 'scsi': registered
- [ 3.356467] device class 'scsi_device': registering
- [ 3.356467] SCSI subsystem initialized
- [ 3.356467] device class 'ata_link': registering
- [ 3.356467] device class 'ata_port': registering
- [ 3.356467] device class 'ata_device': registering
- [ 3.356467] libata version 3.00 loaded.
- [ 3.356467] ACPI: bus type USB registered
- [ 3.356467] bus: 'usb': registered
- [ 3.356467] device class 'usbmisc': registering
- [ 3.356467] bus: 'usb': add driver usbfs
- [ 3.356467] usbcore: registered new interface driver usbfs
- [ 3.356467] bus: 'usb': add driver hub
- [ 3.356467] usbcore: registered new interface driver hub
- [ 3.356467] bus: 'usb': add driver usb
- [ 3.356467] usbcore: registered new device driver usb
- [ 3.356467] bus: 'typec': registered
- [ 3.356467] device class 'typec_mux': registering
- [ 3.356467] device class 'retimer': registering
- [ 3.356467] device class 'typec': registering
- [ 3.356467] device class 'usb_power_delivery': registering
- [ 3.356467] device class 'usb_role': registering
- [ 3.356467] bus: 'serio': registered
- [ 3.356467] device class 'input': registering
- [ 3.356467] device class 'rtc': registering
- [ 3.356467] device class 'power_supply': registering
- [ 3.356467] EDAC MC: Ver: 3.0.0
- [ 3.356467] bus: 'edac': registered
- [ 3.356467] device: 'edac': device_add
- [ 3.356467] PM: Adding info for No Bus:edac
- [ 3.356467] device: 'mc': device_add
- [ 3.356467] bus: 'edac': add device mc
- [ 3.356467] PM: Adding info for edac:mc
- [ 3.356506] device class 'devfreq': registering
- [ 3.356514] device class 'net': registering
- [ 3.356547] device: 'lo': device_add
- [ 3.356759] PM: Adding info for No Bus:lo
- [ 3.357147] PCI: Using ACPI for IRQ routing
- [ 3.358835] PCI: pci_cache_line_size set to 64 bytes
- [ 3.358899] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
- [ 3.358906] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
- [ 3.358911] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
- [ 3.358915] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
- [ 3.358919] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
- [ 3.358923] e820: reserve RAM buffer [mem 0x32f000000-0x32fffffff]
- [ 3.358935] device: 'vga_arbiter': device_add
- [ 3.358983] PM: Adding info for No Bus:vga_arbiter
- [ 3.359009] pci 0000:00:01.0: vgaarb: setting as boot VGA device
- [ 3.359009] pci 0000:00:01.0: vgaarb: bridge control possible
- [ 3.359009] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 3.359009] vgaarb: loaded
- [ 3.359009] Registering platform device 'platform-framebuffer.0'. Parent at platform
- [ 3.359009] device: 'platform-framebuffer.0': device_add
- [ 3.359009] bus: 'platform': add device platform-framebuffer.0
- [ 3.359009] PM: Adding info for platform:platform-framebuffer.0
- [ 3.359009] device class 'wmi_bus': registering
- [ 3.359009] bus: 'wmi': registered
- [ 3.359009] bus: 'platform': add driver acpi-wmi
- [ 3.359009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 3.359009] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 3.366745] clocksource: Switched to clocksource tsc-early
- [ 3.367538] VFS: Disk quotas dquot_6.6.0
- [ 3.367653] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 3.367828] FS-Cache: Loaded
- [ 3.368030] device: 'cachefiles': device_add
- [ 3.368082] PM: Adding info for No Bus:cachefiles
- [ 3.368101] CacheFiles: Loaded
- [ 3.368101] bus: 'pnp': add driver system
- [ 3.368101] pnp: PnP ACPI init
- [ 3.368101] device: 'pnp0': device_add
- [ 3.368101] PM: Adding info for No Bus:pnp0
- [ 3.368683] device: '00:00': device_add
- [ 3.368725] bus: 'pnp': add device 00:00
- [ 3.368782] PM: Adding info for pnp:00:00
- [ 3.368796] bus: 'pnp': __driver_probe_device: matched device 00:00 with driver system
- [ 3.368799] bus: 'pnp': really_probe: probing driver system with device 00:00
- [ 3.368816] system 00:00: no default pinctrl state
- [ 3.368842] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 3.368868] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 3.368887] driver: 'system': driver_bound: bound to device '00:00'
- [ 3.368902] bus: 'pnp': really_probe: bound device 00:00 to driver system
- [ 3.370239] device: '00:01': device_add
- [ 3.370276] bus: 'pnp': add device 00:01
- [ 3.370333] PM: Adding info for pnp:00:01
- [ 3.370435] device: '00:02': device_add
- [ 3.370472] bus: 'pnp': add device 00:02
- [ 3.370530] PM: Adding info for pnp:00:02
- [ 3.370726] device: '00:03': device_add
- [ 3.370762] bus: 'pnp': add device 00:03
- [ 3.370819] PM: Adding info for pnp:00:03
- [ 3.371323] device: '00:04': device_add
- [ 3.371361] bus: 'pnp': add device 00:04
- [ 3.371419] PM: Adding info for pnp:00:04
- [ 3.371431] bus: 'pnp': __driver_probe_device: matched device 00:04 with driver system
- [ 3.371433] bus: 'pnp': really_probe: probing driver system with device 00:04
- [ 3.371444] system 00:04: no default pinctrl state
- [ 3.371466] system 00:04: [io 0x0400-0x04cf] has been reserved
- [ 3.371491] system 00:04: [io 0x04d0-0x04d1] has been reserved
- [ 3.371515] system 00:04: [io 0x04d6] has been reserved
- [ 3.371538] system 00:04: [io 0x0680-0x06ff] has been reserved
- [ 3.371562] system 00:04: [io 0x077a] has been reserved
- [ 3.371584] system 00:04: [io 0x0c00-0x0c01] has been reserved
- [ 3.371608] system 00:04: [io 0x0c14] has been reserved
- [ 3.371630] system 00:04: [io 0x0c50-0x0c52] has been reserved
- [ 3.371654] system 00:04: [io 0x0c6c] has been reserved
- [ 3.371677] system 00:04: [io 0x0c6f] has been reserved
- [ 3.371702] system 00:04: [io 0x0cd0-0x0cdb] could not be reserved
- [ 3.371725] system 00:04: [io 0x0840-0x0847] has been reserved
- [ 3.371742] driver: 'system': driver_bound: bound to device '00:04'
- [ 3.371755] bus: 'pnp': really_probe: bound device 00:04 to driver system
- [ 3.372137] device: '00:05': device_add
- [ 3.372175] bus: 'pnp': add device 00:05
- [ 3.372232] PM: Adding info for pnp:00:05
- [ 3.372243] bus: 'pnp': __driver_probe_device: matched device 00:05 with driver system
- [ 3.372245] bus: 'pnp': really_probe: probing driver system with device 00:05
- [ 3.372256] system 00:05: no default pinctrl state
- [ 3.372277] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 3.372301] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
- [ 3.372319] driver: 'system': driver_bound: bound to device '00:05'
- [ 3.372331] bus: 'pnp': really_probe: bound device 00:05 to driver system
- [ 3.388701] pnp: PnP ACPI: found 6 devices
- [ 3.388742] device class 'mem': registering
- [ 3.388779] device: 'mem': device_add
- [ 3.388852] PM: Adding info for No Bus:mem
- [ 3.388934] device: 'null': device_add
- [ 3.388986] PM: Adding info for No Bus:null
- [ 3.389036] device: 'port': device_add
- [ 3.389087] PM: Adding info for No Bus:port
- [ 3.389140] device: 'zero': device_add
- [ 3.389199] PM: Adding info for No Bus:zero
- [ 3.389248] device: 'full': device_add
- [ 3.389298] PM: Adding info for No Bus:full
- [ 3.389346] device: 'random': device_add
- [ 3.389396] PM: Adding info for No Bus:random
- [ 3.389444] device: 'urandom': device_add
- [ 3.389494] PM: Adding info for No Bus:urandom
- [ 3.389544] device: 'kmsg': device_add
- [ 3.389596] PM: Adding info for No Bus:kmsg
- [ 3.389664] device: 'tty': device_add
- [ 3.389723] PM: Adding info for No Bus:tty
- [ 3.389778] device: 'console': device_add
- [ 3.389832] PM: Adding info for No Bus:console
- [ 3.389889] device: 'tty0': device_add
- [ 3.389948] PM: Adding info for No Bus:tty0
- [ 3.390005] device class 'vc': registering
- [ 3.390028] device: 'vcs': device_add
- [ 3.390093] PM: Adding info for No Bus:vcs
- [ 3.390143] device: 'vcsu': device_add
- [ 3.390196] PM: Adding info for No Bus:vcsu
- [ 3.390246] device: 'vcsa': device_add
- [ 3.390299] PM: Adding info for No Bus:vcsa
- [ 3.390355] device: 'vcs1': device_add
- [ 3.390417] PM: Adding info for No Bus:vcs1
- [ 3.390473] device: 'vcsu1': device_add
- [ 3.390535] PM: Adding info for No Bus:vcsu1
- [ 3.390590] device: 'vcsa1': device_add
- [ 3.390651] PM: Adding info for No Bus:vcsa1
- [ 3.390724] device: 'tty1': device_add
- [ 3.390782] PM: Adding info for No Bus:tty1
- [ 3.390850] device: 'tty2': device_add
- [ 3.390907] PM: Adding info for No Bus:tty2
- [ 3.390966] device: 'tty3': device_add
- [ 3.391026] PM: Adding info for No Bus:tty3
- [ 3.391083] device: 'tty4': device_add
- [ 3.391141] PM: Adding info for No Bus:tty4
- [ 3.391201] device: 'tty5': device_add
- [ 3.391259] PM: Adding info for No Bus:tty5
- [ 3.391316] device: 'tty6': device_add
- [ 3.391374] PM: Adding info for No Bus:tty6
- [ 3.391432] device: 'tty7': device_add
- [ 3.391494] PM: Adding info for No Bus:tty7
- [ 3.391552] device: 'tty8': device_add
- [ 3.391610] PM: Adding info for No Bus:tty8
- [ 3.391670] device: 'tty9': device_add
- [ 3.391726] PM: Adding info for No Bus:tty9
- [ 3.391784] device: 'tty10': device_add
- [ 3.391845] PM: Adding info for No Bus:tty10
- [ 3.391902] device: 'tty11': device_add
- [ 3.391965] PM: Adding info for No Bus:tty11
- [ 3.392023] device: 'tty12': device_add
- [ 3.392089] PM: Adding info for No Bus:tty12
- [ 3.392147] device: 'tty13': device_add
- [ 3.392205] PM: Adding info for No Bus:tty13
- [ 3.392263] device: 'tty14': device_add
- [ 3.392323] PM: Adding info for No Bus:tty14
- [ 3.392383] device: 'tty15': device_add
- [ 3.392452] PM: Adding info for No Bus:tty15
- [ 3.392510] device: 'tty16': device_add
- [ 3.392567] PM: Adding info for No Bus:tty16
- [ 3.392626] device: 'tty17': device_add
- [ 3.392684] PM: Adding info for No Bus:tty17
- [ 3.392742] device: 'tty18': device_add
- [ 3.392801] PM: Adding info for No Bus:tty18
- [ 3.392857] device: 'tty19': device_add
- [ 3.392919] PM: Adding info for No Bus:tty19
- [ 3.392975] device: 'tty20': device_add
- [ 3.393034] PM: Adding info for No Bus:tty20
- [ 3.393096] device: 'tty21': device_add
- [ 3.393155] PM: Adding info for No Bus:tty21
- [ 3.393214] device: 'tty22': device_add
- [ 3.393272] PM: Adding info for No Bus:tty22
- [ 3.393331] device: 'tty23': device_add
- [ 3.393394] PM: Adding info for No Bus:tty23
- [ 3.393453] device: 'tty24': device_add
- [ 3.393513] PM: Adding info for No Bus:tty24
- [ 3.393569] device: 'tty25': device_add
- [ 3.393626] PM: Adding info for No Bus:tty25
- [ 3.393683] device: 'tty26': device_add
- [ 3.393744] PM: Adding info for No Bus:tty26
- [ 3.393800] device: 'tty27': device_add
- [ 3.393861] PM: Adding info for No Bus:tty27
- [ 3.393919] device: 'tty28': device_add
- [ 3.393977] PM: Adding info for No Bus:tty28
- [ 3.394036] device: 'tty29': device_add
- [ 3.394092] PM: Adding info for No Bus:tty29
- [ 3.394152] device: 'tty30': device_add
- [ 3.394208] PM: Adding info for No Bus:tty30
- [ 3.394267] device: 'tty31': device_add
- [ 3.394328] PM: Adding info for No Bus:tty31
- [ 3.394386] device: 'tty32': device_add
- [ 3.394445] PM: Adding info for No Bus:tty32
- [ 3.394501] device: 'tty33': device_add
- [ 3.394557] PM: Adding info for No Bus:tty33
- [ 3.394614] device: 'tty34': device_add
- [ 3.394672] PM: Adding info for No Bus:tty34
- [ 3.394728] device: 'tty35': device_add
- [ 3.394788] PM: Adding info for No Bus:tty35
- [ 3.394845] device: 'tty36': device_add
- [ 3.394903] PM: Adding info for No Bus:tty36
- [ 3.394961] device: 'tty37': device_add
- [ 3.395013] PM: Adding info for No Bus:tty37
- [ 3.395065] device: 'tty38': device_add
- [ 3.395114] PM: Adding info for No Bus:tty38
- [ 3.395166] device: 'tty39': device_add
- [ 3.395218] PM: Adding info for No Bus:tty39
- [ 3.395292] device: 'tty40': device_add
- [ 3.395342] PM: Adding info for No Bus:tty40
- [ 3.395393] device: 'tty41': device_add
- [ 3.395442] PM: Adding info for No Bus:tty41
- [ 3.395493] device: 'tty42': device_add
- [ 3.395541] PM: Adding info for No Bus:tty42
- [ 3.395595] device: 'tty43': device_add
- [ 3.395646] PM: Adding info for No Bus:tty43
- [ 3.395697] device: 'tty44': device_add
- [ 3.395746] PM: Adding info for No Bus:tty44
- [ 3.395806] device: 'tty45': device_add
- [ 3.395855] PM: Adding info for No Bus:tty45
- [ 3.395907] device: 'tty46': device_add
- [ 3.395960] PM: Adding info for No Bus:tty46
- [ 3.396011] device: 'tty47': device_add
- [ 3.396063] PM: Adding info for No Bus:tty47
- [ 3.396113] device: 'tty48': device_add
- [ 3.396165] PM: Adding info for No Bus:tty48
- [ 3.396216] device: 'tty49': device_add
- [ 3.396266] PM: Adding info for No Bus:tty49
- [ 3.396315] device: 'tty50': device_add
- [ 3.396365] PM: Adding info for No Bus:tty50
- [ 3.396416] device: 'tty51': device_add
- [ 3.396466] PM: Adding info for No Bus:tty51
- [ 3.396518] device: 'tty52': device_add
- [ 3.396566] PM: Adding info for No Bus:tty52
- [ 3.396618] device: 'tty53': device_add
- [ 3.396667] PM: Adding info for No Bus:tty53
- [ 3.396719] device: 'tty54': device_add
- [ 3.396771] PM: Adding info for No Bus:tty54
- [ 3.396822] device: 'tty55': device_add
- [ 3.396873] PM: Adding info for No Bus:tty55
- [ 3.396923] device: 'tty56': device_add
- [ 3.396973] PM: Adding info for No Bus:tty56
- [ 3.397023] device: 'tty57': device_add
- [ 3.397071] PM: Adding info for No Bus:tty57
- [ 3.397124] device: 'tty58': device_add
- [ 3.397173] PM: Adding info for No Bus:tty58
- [ 3.397230] device: 'tty59': device_add
- [ 3.397281] PM: Adding info for No Bus:tty59
- [ 3.397332] device: 'tty60': device_add
- [ 3.397381] PM: Adding info for No Bus:tty60
- [ 3.397430] device: 'tty61': device_add
- [ 3.397479] PM: Adding info for No Bus:tty61
- [ 3.397530] device: 'tty62': device_add
- [ 3.397580] PM: Adding info for No Bus:tty62
- [ 3.397632] device: 'tty63': device_add
- [ 3.397685] PM: Adding info for No Bus:tty63
- [ 3.397844] device: 'hw_random': device_add
- [ 3.397902] PM: Adding info for No Bus:hw_random
- [ 3.397955] device class 'firmware': registering
- [ 3.402848] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 3.403015] device class 'powercap': registering
- [ 3.403174] NET: Registered PF_INET protocol family
- [ 3.403278] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 3.408064] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
- [ 3.408122] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 3.408178] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 3.408463] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
- [ 3.409348] TCP: Hash tables configured (established 131072 bind 65536)
- [ 3.409600] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
- [ 3.409779] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
- [ 3.409872] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
- [ 3.410124] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 3.410168] NET: Registered PF_XDP protocol family
- [ 3.410191] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
- [ 3.410234] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
- [ 3.410267] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 3.410285] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
- [ 3.410304] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 3.410322] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 3.410344] pci 0000:00:04.0: PCI bridge to [bus 02]
- [ 3.410360] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
- [ 3.410377] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
- [ 3.411169] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
- [ 3.411190] pci 0000:00:05.0: PCI bridge to [bus 03]
- [ 3.411207] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
- [ 3.411227] pci 0000:00:14.4: PCI bridge to [bus 04]
- [ 3.411252] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 3.411269] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 3.411286] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 3.411303] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cbfff window]
- [ 3.411319] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
- [ 3.411336] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff window]
- [ 3.411352] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
- [ 3.411369] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
- [ 3.411386] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
- [ 3.411402] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
- [ 3.411418] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- [ 3.411438] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- [ 3.411454] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
- [ 3.411471] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
- [ 3.411487] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
- [ 3.411503] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
- [ 3.411519] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 3.411535] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000cbfff window]
- [ 3.411551] pci_bus 0000:04: resource 8 [mem 0x000d0000-0x000effff window]
- [ 3.411568] pci_bus 0000:04: resource 9 [mem 0xd0000000-0xf7ffffff window]
- [ 3.411584] pci_bus 0000:04: resource 10 [mem 0xfc000000-0xfed3ffff window]
- [ 3.411601] pci_bus 0000:04: resource 11 [mem 0xfed45000-0xffffffff window]
- [ 3.412013] device: 'pci:0000:00:01.0--pci:0000:00:01.1': device_add
- [ 3.412100] devices_kset: Moving 0000:00:01.1 to end of list
- [ 3.412102] PM: Moving pci:0000:00:01.1 to end of list
- [ 3.412104] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
- [ 3.412105] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
- [ 3.445979] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x180 took 29734 usecs
- [ 3.475878] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x180 took 29112 usecs
- [ 3.475913] pci 0000:00:12.2: PME# does not work under D3, disabling it
- [ 3.513111] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x180 took 36257 usecs
- [ 3.543020] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x180 took 29121 usecs
- [ 3.543054] pci 0000:00:13.2: PME# does not work under D3, disabling it
- [ 3.543146] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
- [ 3.543183] PCI: CLS 64 bytes, default 64
- [ 3.543268] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 3.543284] software IO TLB: mapped [mem 0x000000009b8bf000-0x000000009f8bf000] (64MB)
- [ 3.543404] LVT offset 0 assigned for vector 0x400
- [ 3.543638] perf: AMD IBS detected (0x000000ff)
- [ 3.543947] bus: 'clocksource': registered
- [ 3.543957] device: 'clocksource': device_add
- [ 3.544003] PM: Adding info for No Bus:clocksource
- [ 3.544012] device: 'clocksource0': device_add
- [ 3.544032] bus: 'clocksource': add device clocksource0
- [ 3.544070] PM: Adding info for clocksource:clocksource0
- [ 3.544089] bus: 'platform': add driver alarmtimer
- [ 3.544175] bus: 'clockevents': registered
- [ 3.544181] device: 'clockevents': device_add
- [ 3.544221] PM: Adding info for No Bus:clockevents
- [ 3.544228] device: 'clockevent0': device_add
- [ 3.544239] bus: 'clockevents': add device clockevent0
- [ 3.544276] PM: Adding info for clockevents:clockevent0
- [ 3.544296] device: 'clockevent1': device_add
- [ 3.544307] bus: 'clockevents': add device clockevent1
- [ 3.544347] PM: Adding info for clockevents:clockevent1
- [ 3.544366] device: 'clockevent2': device_add
- [ 3.544376] bus: 'clockevents': add device clockevent2
- [ 3.544411] PM: Adding info for clockevents:clockevent2
- [ 3.544433] device: 'clockevent3': device_add
- [ 3.544449] bus: 'clockevents': add device clockevent3
- [ 3.544484] PM: Adding info for clockevents:clockevent3
- [ 3.544499] device: 'broadcast': device_add
- [ 3.544506] bus: 'clockevents': add device broadcast
- [ 3.544538] PM: Adding info for clockevents:broadcast
- [ 3.544683] bus: 'event_source': registered
- [ 3.544689] device: 'msr': device_add
- [ 3.544712] bus: 'event_source': add device msr
- [ 3.544751] PM: Adding info for event_source:msr
- [ 3.544773] device: 'ibs_op': device_add
- [ 3.544786] bus: 'event_source': add device ibs_op
- [ 3.544826] PM: Adding info for event_source:ibs_op
- [ 3.544843] device: 'ibs_fetch': device_add
- [ 3.544858] bus: 'event_source': add device ibs_fetch
- [ 3.544897] PM: Adding info for event_source:ibs_fetch
- [ 3.544910] device: 'cpu': device_add
- [ 3.544971] bus: 'event_source': add device cpu
- [ 3.545010] PM: Adding info for event_source:cpu
- [ 3.545023] device: 'breakpoint': device_add
- [ 3.545030] bus: 'event_source': add device breakpoint
- [ 3.545070] PM: Adding info for event_source:breakpoint
- [ 3.545082] device: 'uprobe': device_add
- [ 3.545097] bus: 'event_source': add device uprobe
- [ 3.545135] PM: Adding info for event_source:uprobe
- [ 3.545148] device: 'tracepoint': device_add
- [ 3.545160] bus: 'event_source': add device tracepoint
- [ 3.545197] PM: Adding info for event_source:tracepoint
- [ 3.545210] device: 'software': device_add
- [ 3.545217] bus: 'event_source': add device software
- [ 3.545255] PM: Adding info for event_source:software
- [ 3.545275] Initialise system trusted keyrings
- [ 3.545539] workingset: timestamp_bits=46 max_order=22 bucket_order=0
- [ 3.545586] zbud: loaded
- [ 3.545768] device: 'userfaultfd': device_add
- [ 3.545833] PM: Adding info for No Bus:userfaultfd
- [ 3.556880] Key type asymmetric registered
- [ 3.556896] Asymmetric key parser 'x509' registered
- [ 3.556949] device class 'bsg': registering
- [ 3.556966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 3.556986] io scheduler mq-deadline registered
- [ 3.557002] io scheduler kyber registered
- [ 3.557049] io scheduler bfq registered
- [ 3.557212] bus: 'pci_express': add driver aer
- [ 3.557239] bus: 'pci_express': add driver pcie_pme
- [ 3.557264] bus: 'pci': add driver pcieport
- [ 3.557275] bus: 'pci': __driver_probe_device: matched device 0000:00:02.0 with driver pcieport
- [ 3.557279] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
- [ 3.557293] pcieport 0000:00:02.0: no default pinctrl state
- [ 3.557928] device: '0000:00:02.0:pcie010': device_add
- [ 3.557939] bus: 'pci_express': add device 0000:00:02.0:pcie010
- [ 3.557978] PM: Adding info for pci_express:0000:00:02.0:pcie010
- [ 3.558011] driver: 'pcieport': driver_bound: bound to device '0000:00:02.0'
- [ 3.558032] bus: 'pci': really_probe: bound device 0000:00:02.0 to driver pcieport
- [ 3.558035] bus: 'pci': __driver_probe_device: matched device 0000:00:04.0 with driver pcieport
- [ 3.558037] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:04.0
- [ 3.558047] pcieport 0000:00:04.0: no default pinctrl state
- [ 3.558542] device: '0000:00:04.0:pcie010': device_add
- [ 3.558552] bus: 'pci_express': add device 0000:00:04.0:pcie010
- [ 3.558586] PM: Adding info for pci_express:0000:00:04.0:pcie010
- [ 3.558615] driver: 'pcieport': driver_bound: bound to device '0000:00:04.0'
- [ 3.558630] bus: 'pci': really_probe: bound device 0000:00:04.0 to driver pcieport
- [ 3.558633] bus: 'pci': __driver_probe_device: matched device 0000:00:05.0 with driver pcieport
- [ 3.558634] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:05.0
- [ 3.558643] pcieport 0000:00:05.0: no default pinctrl state
- [ 3.559125] device: '0000:00:05.0:pcie010': device_add
- [ 3.559134] bus: 'pci_express': add device 0000:00:05.0:pcie010
- [ 3.559166] PM: Adding info for pci_express:0000:00:05.0:pcie010
- [ 3.559194] driver: 'pcieport': driver_bound: bound to device '0000:00:05.0'
- [ 3.559209] bus: 'pci': really_probe: bound device 0000:00:05.0 to driver pcieport
- [ 3.559214] bus: 'pci': __driver_probe_device: matched device 0000:00:14.4 with driver pcieport
- [ 3.559216] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:14.4
- [ 3.559225] pcieport 0000:00:14.4: no default pinctrl state
- [ 3.559237] pcieport: probe of 0000:00:14.4 rejects match -19
- [ 3.559379] bus: 'platform': add driver vesa-framebuffer
- [ 3.559407] bus: 'platform': add driver acpi-ged
- [ 3.559440] bus: 'acpi': add driver video
- [ 3.559457] bus: 'acpi': __driver_probe_device: matched device LNXVIDEO:00 with driver video
- [ 3.559459] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:00
- [ 3.559469] video LNXVIDEO:00: no default pinctrl state
- [ 3.559683] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 3.560141] device: 'input0': device_add
- [ 3.560264] PM: Adding info for No Bus:input0
- [ 3.560282] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
- [ 3.560316] driver: 'video': driver_bound: bound to device 'LNXVIDEO:00'
- [ 3.560327] bus: 'acpi': really_probe: bound device LNXVIDEO:00 to driver video
- [ 3.560330] bus: 'acpi': __driver_probe_device: matched device LNXVIDEO:01 with driver video
- [ 3.560331] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:01
- [ 3.560342] video LNXVIDEO:01: no default pinctrl state
- [ 3.560514] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no)
- [ 3.560804] device: 'input1': device_add
- [ 3.560913] PM: Adding info for No Bus:input1
- [ 3.560929] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:01/input/input1
- [ 3.560960] driver: 'video': driver_bound: bound to device 'LNXVIDEO:01'
- [ 3.560970] bus: 'acpi': really_probe: bound device LNXVIDEO:01 to driver video
- [ 3.560973] bus: 'acpi': __driver_probe_device: matched device LNXVIDEO:02 with driver video
- [ 3.560975] bus: 'acpi': really_probe: probing driver video with device LNXVIDEO:02
- [ 3.560984] video LNXVIDEO:02: no default pinctrl state
- [ 3.561016] video: probe of LNXVIDEO:02 rejects match -19
- [ 3.561049] bus: 'cpu': add driver processor
- [ 3.561057] bus: 'cpu': __driver_probe_device: matched device cpu0 with driver processor
- [ 3.561059] bus: 'cpu': really_probe: probing driver processor with device cpu0
- [ 3.561069] processor cpu0: no default pinctrl state
- [ 3.561117] ACPI: \_PR_.C000: Found 2 idle states
- [ 3.561374] device: 'cooling_device0': device_add
- [ 3.561431] PM: Adding info for No Bus:cooling_device0
- [ 3.561451] driver: 'processor': driver_bound: bound to device 'cpu0'
- [ 3.561477] bus: 'cpu': really_probe: bound device cpu0 to driver processor
- [ 3.561479] bus: 'cpu': __driver_probe_device: matched device cpu1 with driver processor
- [ 3.561480] bus: 'cpu': really_probe: probing driver processor with device cpu1
- [ 3.561489] processor cpu1: no default pinctrl state
- [ 3.561530] ACPI: \_PR_.C001: Found 2 idle states
- [ 3.561754] device: 'cooling_device1': device_add
- [ 3.561802] PM: Adding info for No Bus:cooling_device1
- [ 3.561819] driver: 'processor': driver_bound: bound to device 'cpu1'
- [ 3.561844] bus: 'cpu': really_probe: bound device cpu1 to driver processor
- [ 3.561847] bus: 'cpu': __driver_probe_device: matched device cpu2 with driver processor
- [ 3.561848] bus: 'cpu': really_probe: probing driver processor with device cpu2
- [ 3.561857] processor cpu2: no default pinctrl state
- [ 3.561898] ACPI: \_PR_.C002: Found 2 idle states
- [ 3.562321] device: 'cooling_device2': device_add
- [ 3.562376] PM: Adding info for No Bus:cooling_device2
- [ 3.562427] driver: 'processor': driver_bound: bound to device 'cpu2'
- [ 3.562455] bus: 'cpu': really_probe: bound device cpu2 to driver processor
- [ 3.562457] bus: 'cpu': __driver_probe_device: matched device cpu3 with driver processor
- [ 3.562459] bus: 'cpu': really_probe: probing driver processor with device cpu3
- [ 3.562469] processor cpu3: no default pinctrl state
- [ 3.562512] ACPI: \_PR_.C003: Found 2 idle states
- [ 3.562963] device: 'cooling_device3': device_add
- [ 3.563018] PM: Adding info for No Bus:cooling_device3
- [ 3.563037] driver: 'processor': driver_bound: bound to device 'cpu3'
- [ 3.563064] bus: 'cpu': really_probe: bound device cpu3 to driver processor
- [ 3.563085] bus: 'acpi': add driver hardware_error_device
- [ 3.563123] bus: 'platform': add driver gpio-clk
- [ 3.563148] bus: 'platform': add driver clk-fch
- [ 3.563208] device: 'ptmx': device_add
- [ 3.563253] PM: Adding info for No Bus:ptmx
- [ 3.563472] device: 'hpet': device_add
- [ 3.563517] PM: Adding info for No Bus:hpet
- [ 3.563567] bus: 'acpi': add driver hpet
- [ 3.563584] bus: 'acpi': __driver_probe_device: matched device PNP0103:00 with driver hpet
- [ 3.563586] bus: 'acpi': really_probe: probing driver hpet with device PNP0103:00
- [ 3.563596] hpet PNP0103:00: no default pinctrl state
- [ 3.563916] hpet: probe of PNP0103:00 rejects match -19
- [ 3.563953] device: 'nvram': device_add
- [ 3.564001] PM: Adding info for No Bus:nvram
- [ 3.564165] Non-volatile memory driver v1.3
- [ 3.564182] bus: 'platform': add driver timeriomem_rng
- [ 3.564205] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
- [ 3.564255] device class 'drm': registering
- [ 3.564277] ACPI: bus type drm_connector registered
- [ 3.564533] device: 'cache': device_add
- [ 3.564555] device: 'index0': device_add
- [ 3.564602] device: 'index1': device_add
- [ 3.564659] device: 'index2': device_add
- [ 3.564714] device: 'cache': device_add
- [ 3.564730] device: 'index0': device_add
- [ 3.564774] device: 'index1': device_add
- [ 3.564816] device: 'index2': device_add
- [ 3.564895] device: 'cache': device_add
- [ 3.564940] device: 'index0': device_add
- [ 3.564989] device: 'index1': device_add
- [ 3.565032] device: 'index2': device_add
- [ 3.565140] device: 'cache': device_add
- [ 3.565193] device: 'index0': device_add
- [ 3.565235] device: 'index1': device_add
- [ 3.565276] device: 'index2': device_add
- [ 3.565332] device: 'system': device_add
- [ 3.565384] PM: Adding info for No Bus:system
- [ 3.565504] device class 'spi_transport': registering
- [ 3.565520] device class 'spi_host': registering
- [ 3.565567] device class 'scsi_disk': registering
- [ 3.565587] bus: 'scsi': add driver sd
- [ 3.566084] bus: 'pci': add driver ahci
- [ 3.566106] bus: 'pci': __driver_probe_device: matched device 0000:00:11.0 with driver ahci
- [ 3.566110] bus: 'pci': really_probe: probing driver ahci with device 0000:00:11.0
- [ 3.566125] ahci 0000:00:11.0: no default pinctrl state
- [ 3.566144] ahci 0000:00:11.0: version 3.0
- [ 3.566997] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 3.567023] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 3.567186] device: 'ata1': device_add
- [ 3.567223] PM: Adding info for No Bus:ata1
- [ 3.567230] device: 'ata1': device_add
- [ 3.567283] PM: Adding info for No Bus:ata1
- [ 3.567316] device: 'link1': device_add
- [ 3.567353] PM: Adding info for No Bus:link1
- [ 3.567357] device: 'link1': device_add
- [ 3.567410] PM: Adding info for No Bus:link1
- [ 3.567439] device: 'dev1.0': device_add
- [ 3.567474] PM: Adding info for No Bus:dev1.0
- [ 3.567478] device: 'dev1.0': device_add
- [ 3.567528] PM: Adding info for No Bus:dev1.0
- [ 3.567572] device: 'ata2': device_add
- [ 3.567606] PM: Adding info for No Bus:ata2
- [ 3.567610] device: 'ata2': device_add
- [ 3.567657] PM: Adding info for No Bus:ata2
- [ 3.567682] device: 'link2': device_add
- [ 3.567716] PM: Adding info for No Bus:link2
- [ 3.567720] device: 'link2': device_add
- [ 3.567767] PM: Adding info for No Bus:link2
- [ 3.567794] device: 'dev2.0': device_add
- [ 3.567830] PM: Adding info for No Bus:dev2.0
- [ 3.567834] device: 'dev2.0': device_add
- [ 3.567882] PM: Adding info for No Bus:dev2.0
- [ 3.568261] device: 'scsi_tmf_0': device_add
- [ 3.568273] bus: 'workqueue': add device scsi_tmf_0
- [ 3.568316] PM: Adding info for workqueue:scsi_tmf_0
- [ 3.568340] scsi host0: ahci
- [ 3.568496] device: 'host0': device_add
- [ 3.568507] bus: 'scsi': add device host0
- [ 3.568548] PM: Adding info for scsi:host0
- [ 3.568562] device: 'host0': device_add
- [ 3.568685] PM: Adding info for No Bus:host0
- [ 3.569015] device: 'scsi_tmf_1': device_add
- [ 3.569026] bus: 'workqueue': add device scsi_tmf_1
- [ 3.569066] PM: Adding info for workqueue:scsi_tmf_1
- [ 3.569092] scsi host1: ahci
- [ 3.569218] device: 'host1': device_add
- [ 3.569227] bus: 'scsi': add device host1
- [ 3.569270] PM: Adding info for scsi:host1
- [ 3.569282] device: 'host1': device_add
- [ 3.569407] PM: Adding info for No Bus:host1
- [ 3.569462] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 27
- [ 3.569483] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 27
- [ 3.569512] driver: 'ahci': driver_bound: bound to device '0000:00:11.0'
- [ 3.569551] bus: 'pci': really_probe: bound device 0000:00:11.0 to driver ahci
- [ 3.569648] bus: 'pci': add driver ehci-pci
- [ 3.569660] pci 0000:00:12.2: probing driver ehci-pci asynchronously
- [ 3.569668] pci 0000:00:13.2: probing driver ehci-pci asynchronously
- [ 3.569673] bus: 'pci': __driver_probe_device: matched device 0000:00:12.2 with driver ehci-pci
- [ 3.569683] bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:12.2
- [ 3.569711] ehci-pci 0000:00:12.2: no default pinctrl state
- [ 3.569717] bus: 'pci': add driver ohci-pci
- [ 3.569729] bus: 'pci': __driver_probe_device: matched device 0000:00:12.0 with driver ohci-pci
- [ 3.569731] bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:12.0
- [ 3.569743] ohci-pci 0000:00:12.0: no default pinctrl state
- [ 3.569817] bus: 'pci': __driver_probe_device: matched device 0000:00:13.2 with driver ehci-pci
- [ 3.569821] bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:13.2
- [ 3.569833] ehci-pci 0000:00:13.2: no default pinctrl state
- [ 3.570622] QUIRK: Enable AMD PLL fix
- [ 3.570688] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 3.570740] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 3.570781] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.570823] ehci-pci 0000:00:12.2: debug port 1
- [ 3.570948] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
- [ 3.602607] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 3.602829] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
- [ 3.602852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.602873] usb usb1: Product: EHCI Host Controller
- [ 3.602889] usb usb1: Manufacturer: Linux 6.6.6 ehci_hcd
- [ 3.602905] usb usb1: SerialNumber: 0000:00:12.2
- [ 3.602927] device: 'usb1': device_add
- [ 3.603066] bus: 'usb': add device usb1
- [ 3.603137] PM: Adding info for usb:usb1
- [ 3.603420] bus: 'usb': __driver_probe_device: matched device usb1 with driver usb
- [ 3.603423] bus: 'usb': really_probe: probing driver usb with device usb1
- [ 3.603465] device: '1-0:1.0': device_add
- [ 3.603521] bus: 'usb': add device 1-0:1.0
- [ 3.603548] PM: Adding info for usb:1-0:1.0
- [ 3.603561] bus: 'usb': __driver_probe_device: matched device 1-0:1.0 with driver hub
- [ 3.603563] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
- [ 3.603579] hub 1-0:1.0: no default pinctrl state
- [ 3.603593] hub 1-0:1.0: USB hub found
- [ 3.603633] hub 1-0:1.0: 5 ports detected
- [ 3.603699] device: 'usb1-port1': device_add
- [ 3.603778] PM: Adding info for No Bus:usb1-port1
- [ 3.603789] usb usb1-port1: adding component (ops 0xffffffff81eb67c0)
- [ 3.603802] device: 'usb1-port2': device_add
- [ 3.603874] PM: Adding info for No Bus:usb1-port2
- [ 3.603883] usb usb1-port2: adding component (ops 0xffffffff81eb67c0)
- [ 3.603895] device: 'usb1-port3': device_add
- [ 3.604194] PM: Adding info for No Bus:usb1-port3
- [ 3.604203] usb usb1-port3: adding component (ops 0xffffffff81eb67c0)
- [ 3.604216] device: 'usb1-port4': device_add
- [ 3.604351] PM: Adding info for No Bus:usb1-port4
- [ 3.604359] usb usb1-port4: adding component (ops 0xffffffff81eb67c0)
- [ 3.604371] device: 'usb1-port5': device_add
- [ 3.604634] PM: Adding info for No Bus:usb1-port5
- [ 3.604643] usb usb1-port5: adding component (ops 0xffffffff81eb67c0)
- [ 3.604740] driver: 'hub': driver_bound: bound to device '1-0:1.0'
- [ 3.604761] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
- [ 3.604773] device: 'ep_81': device_add
- [ 3.604832] PM: Adding info for No Bus:ep_81
- [ 3.604834] driver: 'usb': driver_bound: bound to device 'usb1'
- [ 3.604851] bus: 'usb': really_probe: bound device usb1 to driver usb
- [ 3.604861] device: 'ep_00': device_add
- [ 3.604913] PM: Adding info for No Bus:ep_00
- [ 3.604955] device: 'wakeup21': device_add
- [ 3.605025] driver: 'ehci-pci': driver_bound: bound to device '0000:00:12.2'
- [ 3.605042] bus: 'pci': really_probe: bound device 0000:00:12.2 to driver ehci-pci
- [ 3.605045] ehci-pci 0000:00:12.2: driver ehci-pci async attach completed: 0
- [ 3.605048] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 3.605110] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 3.605148] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.605222] ehci-pci 0000:00:13.2: debug port 1
- [ 3.605355] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
- [ 3.635423] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 3.635644] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
- [ 3.635667] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.635688] usb usb2: Product: EHCI Host Controller
- [ 3.635704] usb usb2: Manufacturer: Linux 6.6.6 ehci_hcd
- [ 3.635721] usb usb2: SerialNumber: 0000:00:13.2
- [ 3.635742] device: 'usb2': device_add
- [ 3.635889] bus: 'usb': add device usb2
- [ 3.635950] PM: Adding info for usb:usb2
- [ 3.636098] bus: 'usb': __driver_probe_device: matched device usb2 with driver usb
- [ 3.636101] bus: 'usb': really_probe: probing driver usb with device usb2
- [ 3.636139] device: '2-0:1.0': device_add
- [ 3.636189] bus: 'usb': add device 2-0:1.0
- [ 3.636216] PM: Adding info for usb:2-0:1.0
- [ 3.636228] bus: 'usb': __driver_probe_device: matched device 2-0:1.0 with driver hub
- [ 3.636230] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
- [ 3.636241] hub 2-0:1.0: no default pinctrl state
- [ 3.636254] hub 2-0:1.0: USB hub found
- [ 3.636292] hub 2-0:1.0: 5 ports detected
- [ 3.636347] device: 'usb2-port1': device_add
- [ 3.636656] PM: Adding info for No Bus:usb2-port1
- [ 3.636667] usb usb2-port1: adding component (ops 0xffffffff81eb67c0)
- [ 3.636683] device: 'usb2-port2': device_add
- [ 3.636731] PM: Adding info for No Bus:usb2-port2
- [ 3.636739] usb usb2-port2: adding component (ops 0xffffffff81eb67c0)
- [ 3.636752] device: 'usb2-port3': device_add
- [ 3.636804] PM: Adding info for No Bus:usb2-port3
- [ 3.636814] usb usb2-port3: adding component (ops 0xffffffff81eb67c0)
- [ 3.636826] device: 'usb2-port4': device_add
- [ 3.636875] PM: Adding info for No Bus:usb2-port4
- [ 3.636882] usb usb2-port4: adding component (ops 0xffffffff81eb67c0)
- [ 3.636893] device: 'usb2-port5': device_add
- [ 3.636943] PM: Adding info for No Bus:usb2-port5
- [ 3.636951] usb usb2-port5: adding component (ops 0xffffffff81eb67c0)
- [ 3.637068] driver: 'hub': driver_bound: bound to device '2-0:1.0'
- [ 3.637084] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
- [ 3.637095] device: 'ep_81': device_add
- [ 3.637152] PM: Adding info for No Bus:ep_81
- [ 3.637154] driver: 'usb': driver_bound: bound to device 'usb2'
- [ 3.637169] bus: 'usb': really_probe: bound device usb2 to driver usb
- [ 3.637179] device: 'ep_00': device_add
- [ 3.637229] PM: Adding info for No Bus:ep_00
- [ 3.637269] device: 'wakeup22': device_add
- [ 3.637342] driver: 'ehci-pci': driver_bound: bound to device '0000:00:13.2'
- [ 3.637347] ohci-pci 0000:00:12.0: OHCI PCI host controller
- [ 3.637357] bus: 'pci': really_probe: bound device 0000:00:13.2 to driver ehci-pci
- [ 3.637376] ehci-pci 0000:00:13.2: driver ehci-pci async attach completed: 0
- [ 3.637412] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 3.637598] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
- [ 3.692561] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.694204] ata1.00: ATA-9: SSD 256GB, W0110A0, max UDMA/133
- [ 3.694781] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.695061] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
- [ 3.696897] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
- [ 3.713596] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06
- [ 3.713625] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.713645] usb usb3: Product: OHCI PCI host controller
- [ 3.713661] usb usb3: Manufacturer: Linux 6.6.6 ohci_hcd
- [ 3.713676] usb usb3: SerialNumber: 0000:00:12.0
- [ 3.713697] device: 'usb3': device_add
- [ 3.713841] bus: 'usb': add device usb3
- [ 3.713902] PM: Adding info for usb:usb3
- [ 3.714238] bus: 'usb': __driver_probe_device: matched device usb3 with driver usb
- [ 3.714244] bus: 'usb': really_probe: probing driver usb with device usb3
- [ 3.714303] device: '3-0:1.0': device_add
- [ 3.714373] bus: 'usb': add device 3-0:1.0
- [ 3.714408] PM: Adding info for usb:3-0:1.0
- [ 3.714422] bus: 'usb': __driver_probe_device: matched device 3-0:1.0 with driver hub
- [ 3.714424] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
- [ 3.714437] hub 3-0:1.0: no default pinctrl state
- [ 3.714454] hub 3-0:1.0: USB hub found
- [ 3.714511] hub 3-0:1.0: 5 ports detected
- [ 3.714583] device: 'usb3-port1': device_add
- [ 3.714670] PM: Adding info for No Bus:usb3-port1
- [ 3.714683] usb usb3-port1: adding component (ops 0xffffffff81eb67c0)
- [ 3.714699] device: 'usb3-port2': device_add
- [ 3.714777] PM: Adding info for No Bus:usb3-port2
- [ 3.714789] usb usb3-port2: adding component (ops 0xffffffff81eb67c0)
- [ 3.714804] device: 'usb3-port3': device_add
- [ 3.715130] PM: Adding info for No Bus:usb3-port3
- [ 3.715139] usb usb3-port3: adding component (ops 0xffffffff81eb67c0)
- [ 3.715153] device: 'usb3-port4': device_add
- [ 3.715441] PM: Adding info for No Bus:usb3-port4
- [ 3.715451] usb usb3-port4: adding component (ops 0xffffffff81eb67c0)
- [ 3.715464] device: 'usb3-port5': device_add
- [ 3.715747] PM: Adding info for No Bus:usb3-port5
- [ 3.715757] usb usb3-port5: adding component (ops 0xffffffff81eb67c0)
- [ 3.715830] driver: 'hub': driver_bound: bound to device '3-0:1.0'
- [ 3.715846] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
- [ 3.715859] device: 'ep_81': device_add
- [ 3.715917] PM: Adding info for No Bus:ep_81
- [ 3.715919] driver: 'usb': driver_bound: bound to device 'usb3'
- [ 3.715939] bus: 'usb': really_probe: bound device usb3 to driver usb
- [ 3.715951] device: 'ep_00': device_add
- [ 3.716011] PM: Adding info for No Bus:ep_00
- [ 3.716097] device: 'wakeup23': device_add
- [ 3.716164] driver: 'ohci-pci': driver_bound: bound to device '0000:00:12.0'
- [ 3.716183] bus: 'pci': really_probe: bound device 0000:00:12.0 to driver ohci-pci
- [ 3.716187] bus: 'pci': __driver_probe_device: matched device 0000:00:13.0 with driver ohci-pci
- [ 3.716189] bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:13.0
- [ 3.716199] ohci-pci 0000:00:13.0: no default pinctrl state
- [ 3.716686] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 3.716720] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
- [ 3.716814] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
- [ 3.793597] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.06
- [ 3.793627] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.793648] usb usb4: Product: OHCI PCI host controller
- [ 3.793664] usb usb4: Manufacturer: Linux 6.6.6 ohci_hcd
- [ 3.793680] usb usb4: SerialNumber: 0000:00:13.0
- [ 3.793701] device: 'usb4': device_add
- [ 3.793839] bus: 'usb': add device usb4
- [ 3.793899] PM: Adding info for usb:usb4
- [ 3.794227] bus: 'usb': __driver_probe_device: matched device usb4 with driver usb
- [ 3.794233] bus: 'usb': really_probe: probing driver usb with device usb4
- [ 3.794287] device: '4-0:1.0': device_add
- [ 3.794356] bus: 'usb': add device 4-0:1.0
- [ 3.794384] PM: Adding info for usb:4-0:1.0
- [ 3.794398] bus: 'usb': __driver_probe_device: matched device 4-0:1.0 with driver hub
- [ 3.794400] bus: 'usb': really_probe: probing driver hub with device 4-0:1.0
- [ 3.794413] hub 4-0:1.0: no default pinctrl state
- [ 3.794428] hub 4-0:1.0: USB hub found
- [ 3.794488] hub 4-0:1.0: 5 ports detected
- [ 3.794561] device: 'usb4-port1': device_add
- [ 3.794902] PM: Adding info for No Bus:usb4-port1
- [ 3.794924] usb usb4-port1: adding component (ops 0xffffffff81eb67c0)
- [ 3.794941] device: 'usb4-port2': device_add
- [ 3.794993] PM: Adding info for No Bus:usb4-port2
- [ 3.795003] usb usb4-port2: adding component (ops 0xffffffff81eb67c0)
- [ 3.795014] device: 'usb4-port3': device_add
- [ 3.795063] PM: Adding info for No Bus:usb4-port3
- [ 3.795071] usb usb4-port3: adding component (ops 0xffffffff81eb67c0)
- [ 3.795084] device: 'usb4-port4': device_add
- [ 3.795134] PM: Adding info for No Bus:usb4-port4
- [ 3.795143] usb usb4-port4: adding component (ops 0xffffffff81eb67c0)
- [ 3.795154] device: 'usb4-port5': device_add
- [ 3.795205] PM: Adding info for No Bus:usb4-port5
- [ 3.795213] usb usb4-port5: adding component (ops 0xffffffff81eb67c0)
- [ 3.795291] driver: 'hub': driver_bound: bound to device '4-0:1.0'
- [ 3.795306] bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub
- [ 3.795316] device: 'ep_81': device_add
- [ 3.795387] PM: Adding info for No Bus:ep_81
- [ 3.795394] driver: 'usb': driver_bound: bound to device 'usb4'
- [ 3.795411] bus: 'usb': really_probe: bound device usb4 to driver usb
- [ 3.795422] device: 'ep_00': device_add
- [ 3.795481] PM: Adding info for No Bus:ep_00
- [ 3.795534] device: 'wakeup24': device_add
- [ 3.795600] driver: 'ohci-pci': driver_bound: bound to device '0000:00:13.0'
- [ 3.795618] bus: 'pci': really_probe: bound device 0000:00:13.0 to driver ohci-pci
- [ 3.795673] bus: 'usb': add driver usb-storage
- [ 3.795711] usbcore: registered new interface driver usb-storage
- [ 3.795729] bus: 'i2c': add driver tcpci
- [ 3.795763] bus: 'pnp': add driver i8042 kbd
- [ 3.795774] bus: 'pnp': __driver_probe_device: matched device 00:02 with driver i8042 kbd
- [ 3.795777] bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:02
- [ 3.795788] i8042 kbd 00:02: no default pinctrl state
- [ 3.795802] driver: 'i8042 kbd': driver_bound: bound to device '00:02'
- [ 3.795817] bus: 'pnp': really_probe: bound device 00:02 to driver i8042 kbd
- [ 3.795832] bus: 'pnp': add driver i8042 aux
- [ 3.795841] bus: 'pnp': __driver_probe_device: matched device 00:03 with driver i8042 aux
- [ 3.795843] bus: 'pnp': really_probe: probing driver i8042 aux with device 00:03
- [ 3.795853] i8042 aux 00:03: no default pinctrl state
- [ 3.795866] driver: 'i8042 aux': driver_bound: bound to device '00:03'
- [ 3.795879] bus: 'pnp': really_probe: bound device 00:03 to driver i8042 aux
- [ 3.795893] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
- [ 3.795963] bus: 'platform': add driver i8042
- [ 3.795997] Registering platform device 'i8042'. Parent at platform
- [ 3.796002] device: 'i8042': device_add
- [ 3.796013] bus: 'platform': add device i8042
- [ 3.796061] PM: Adding info for platform:i8042
- [ 3.796074] bus: 'platform': __driver_probe_device: matched device i8042 with driver i8042
- [ 3.796076] bus: 'platform': really_probe: probing driver i8042 with device i8042
- [ 3.796086] i8042 i8042: no default pinctrl state
- [ 3.839226] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.839257] device: 'serio0': device_add
- [ 3.839311] bus: 'serio': add device serio0
- [ 3.839370] PM: Adding info for serio:serio0
- [ 3.839383] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 3.839409] device: 'serio1': device_add
- [ 3.839441] bus: 'serio': add device serio1
- [ 3.839495] PM: Adding info for serio:serio1
- [ 3.839507] driver: 'i8042': driver_bound: bound to device 'i8042'
- [ 3.839517] bus: 'platform': really_probe: bound device i8042 to driver i8042
- [ 3.839522] bus: 'serio': add driver atkbd
- [ 3.839554] bus: 'serio': __driver_probe_device: matched device serio0 with driver atkbd
- [ 3.839556] bus: 'serio': really_probe: probing driver atkbd with device serio0
- [ 3.839565] atkbd serio0: no default pinctrl state
- [ 3.841536] device: 'uinput': device_add
- [ 3.841579] PM: Adding info for No Bus:uinput
- [ 3.841765] bus: 'pnp': add driver rtc_cmos
- [ 3.841774] bus: 'pnp': __driver_probe_device: matched device 00:01 with driver rtc_cmos
- [ 3.841776] bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:01
- [ 3.841786] rtc_cmos 00:01: no default pinctrl state
- [ 3.841805] rtc_cmos 00:01: RTC can wake from S4
- [ 3.841872] device: 'wakeup25': device_add
- [ 3.842101] device: 'rtc0': device_add
- [ 3.842177] PM: Adding info for No Bus:rtc0
- [ 3.842344] Registering platform device 'alarmtimer.0.auto'. Parent at rtc0
- [ 3.842348] device: 'alarmtimer.0.auto': device_add
- [ 3.842358] bus: 'platform': add device alarmtimer.0.auto
- [ 3.842405] PM: Adding info for platform:alarmtimer.0.auto
- [ 3.842416] bus: 'platform': __driver_probe_device: matched device alarmtimer.0.auto with driver alarmtimer
- [ 3.842418] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer.0.auto
- [ 3.842429] alarmtimer alarmtimer.0.auto: no default pinctrl state
- [ 3.842441] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer.0.auto'
- [ 3.842451] bus: 'platform': really_probe: bound device alarmtimer.0.auto to driver alarmtimer
- [ 3.842502] device: 'wakeup26': device_add
- [ 3.842572] rtc_cmos 00:01: registered as rtc0
- [ 3.842655] rtc_cmos 00:01: setting system clock to 2023-12-29T17:20:11 UTC (1703870411)
- [ 3.842693] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
- [ 3.842723] driver: 'rtc_cmos': driver_bound: bound to device '00:01'
- [ 3.842736] bus: 'pnp': really_probe: bound device 00:01 to driver rtc_cmos
- [ 3.842784] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
- [ 3.842837] bus: 'hid': registered
- [ 3.842841] device class 'hidraw': registering
- [ 3.842858] hid: raw HID events driver (C) Jiri Kosina
- [ 3.842882] bus: 'hid': add driver hid-generic
- [ 3.842909] bus: 'usb': add driver usbhid
- [ 3.842938] usbcore: registered new interface driver usbhid
- [ 3.842954] usbhid: USB HID core driver
- [ 3.843079] NET: Registered PF_PACKET protocol family
- [ 3.843351] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
- [ 3.843466] bus: 'machinecheck': registered
- [ 3.843476] device: 'machinecheck': device_add
- [ 3.843519] PM: Adding info for No Bus:machinecheck
- [ 3.843542] device: 'machinecheck0': device_add
- [ 3.843555] bus: 'machinecheck': add device machinecheck0
- [ 3.843597] PM: Adding info for machinecheck:machinecheck0
- [ 3.843759] device: 'machinecheck1': device_add
- [ 3.843770] bus: 'machinecheck': add device machinecheck1
- [ 3.843810] PM: Adding info for machinecheck:machinecheck1
- [ 3.844059] device: 'machinecheck2': device_add
- [ 3.844090] bus: 'machinecheck': add device machinecheck2
- [ 3.844134] PM: Adding info for machinecheck:machinecheck2
- [ 3.844342] device: 'machinecheck3': device_add
- [ 3.844354] bus: 'machinecheck': add device machinecheck3
- [ 3.844390] PM: Adding info for machinecheck:machinecheck3
- [ 3.844673] Registering platform device 'microcode'. Parent at platform
- [ 3.844683] device: 'microcode': device_add
- [ 3.844702] bus: 'platform': add device microcode
- [ 3.844756] PM: Adding info for platform:microcode
- [ 3.844808] microcode: CPU0: patch_level=0x06001119
- [ 3.844810] microcode: CPU1: patch_level=0x06001119
- [ 3.844813] microcode: CPU3: patch_level=0x06001119
- [ 3.844932] microcode: CPU2: patch_level=0x06001119
- [ 3.844967] microcode: Microcode Update Driver: v2.2.
- [ 3.844973] IPI shorthand broadcast: enabled
- [ 3.852895] sched_clock: Marking stable (3846875504, 5506609)->(3857436928, -5054815)
- [ 3.852968] device: 'cpu_dma_latency': device_add
- [ 3.853017] PM: Adding info for No Bus:cpu_dma_latency
- [ 3.853459] Loading compiled-in X.509 certificates
- [ 3.854699] Loaded X.509 cert 'Build time autogenerated kernel key: c82ddbf948d94e25c762565cc922699f22bae2a0'
- [ 3.861239] zswap: loaded using pool zstd/z3fold
- [ 3.874918] kmemleak: Kernel memory leak detector initialized (mem pool available: 15598)
- [ 3.874925] kmemleak: Automatic memory scanning thread started
- [ 3.875719] page_owner is disabled
- [ 3.876274] Key type encrypted registered
- [ 3.876301] evm: Initialising EVM extended attributes:
- [ 3.876317] evm: security.selinux
- [ 3.876333] evm: security.SMACK64 (disabled)
- [ 3.876348] evm: security.SMACK64EXEC (disabled)
- [ 3.876363] evm: security.SMACK64TRANSMUTE (disabled)
- [ 3.876379] evm: security.SMACK64MMAP (disabled)
- [ 3.876394] evm: security.apparmor (disabled)
- [ 3.876409] evm: security.ima (disabled)
- [ 3.876425] evm: security.capability
- [ 3.876439] evm: HMAC attrs: 0x1
- [ 3.877146] clk: Disabling unused clocks
- [ 3.877224] device: 'vcs12': device_add
- [ 3.877279] PM: Adding info for No Bus:vcs12
- [ 3.877475] device: 'vcsu12': device_add
- [ 3.877522] PM: Adding info for No Bus:vcsu12
- [ 3.877570] device: 'vcsa12': device_add
- [ 3.877623] PM: Adding info for No Bus:vcsa12
- [ 3.883382] device: 'input2': device_add
- [ 3.883524] PM: Adding info for No Bus:input2
- [ 3.883561] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 3.883617] driver: 'atkbd': driver_bound: bound to device 'serio0'
- [ 3.883653] bus: 'serio': really_probe: bound device serio0 to driver atkbd
- [ 3.883659] bus: 'serio': __driver_probe_device: matched device serio1 with driver atkbd
- [ 3.883662] bus: 'serio': really_probe: probing driver atkbd with device serio1
- [ 3.883675] atkbd serio1: no default pinctrl state
- [ 3.894824] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 3.906025] atkbd: probe of serio1 rejects match -19
- [ 3.925637] usb 2-2: new high-speed USB device number 2 using ehci-pci
- [ 4.126563] usb 2-2: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
- [ 4.126593] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.126611] usb 2-2: Product: USB2.0-CRW
- [ 4.126627] usb 2-2: Manufacturer: Generic
- [ 4.126643] usb 2-2: SerialNumber: 20100201396000000
- [ 4.126664] device: '2-2': device_add
- [ 4.126781] bus: 'usb': add device 2-2
- [ 4.126829] PM: Adding info for usb:2-2
- [ 4.127064] bus: 'usb': __driver_probe_device: matched device 2-2 with driver usb
- [ 4.127067] bus: 'usb': really_probe: probing driver usb with device 2-2
- [ 4.127082] usb 2-2: no default pinctrl state
- [ 4.128189] device: '2-2:1.0': device_add
- [ 4.128235] bus: 'usb': add device 2-2:1.0
- [ 4.128266] PM: Adding info for usb:2-2:1.0
- [ 4.128483] device: 'ep_01': device_add
- [ 4.128542] PM: Adding info for No Bus:ep_01
- [ 4.128552] device: 'ep_82': device_add
- [ 4.128615] PM: Adding info for No Bus:ep_82
- [ 4.128624] device: 'ep_83': device_add
- [ 4.128685] PM: Adding info for No Bus:ep_83
- [ 4.128688] driver: 'usb': driver_bound: bound to device '2-2'
- [ 4.128709] bus: 'usb': really_probe: bound device 2-2 to driver usb
- [ 4.128732] device: 'ep_00': device_add
- [ 4.128791] PM: Adding info for No Bus:ep_00
- [ 4.585629] tsc: Refined TSC clocksource calibration: 2495.335 MHz
- [ 4.585671] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f8031522b, max_idle_ns: 440795271144 ns
- [ 4.585762] clocksource: Switched to clocksource tsc
- [ 8.746317] ata1.00: configured for UDMA/133
- [ 8.746608] device: ':ata1--scsi:0:0:0:0': device_add
- [ 8.746686] scsi 0:0:0:0: Linked as a consumer to ata1
- [ 8.746757] scsi 0:0:0:0: Direct-Access ATA SSD 256GB 0A0 PQ: 0 ANSI: 5
- [ 8.746965] device: 'target0:0:0': device_add
- [ 8.746977] bus: 'scsi': add device target0:0:0
- [ 8.747013] PM: Adding info for scsi:target0:0:0
- [ 8.747028] device: '0:0:0:0': device_add
- [ 8.747145] bus: 'scsi': add device 0:0:0:0
- [ 8.747179] PM: Adding info for scsi:0:0:0:0
- [ 8.747189] scsi 0:0:0:0: scheduling asynchronous probe
- [ 8.747211] device: '0:0:0:0': device_add
- [ 8.747271] PM: Adding info for No Bus:0:0:0:0
- [ 8.747297] device: '0:0:0:0': device_add
- [ 8.747306] bus: 'scsi': __driver_probe_device: matched device 0:0:0:0 with driver sd
- [ 8.747317] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
- [ 8.747346] sd 0:0:0:0: no default pinctrl state
- [ 8.747363] PM: Adding info for No Bus:0:0:0:0
- [ 8.747658] device: '0:0:0:0': device_add
- [ 8.747774] PM: Adding info for No Bus:0:0:0:0
- [ 8.747846] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
- [ 8.747887] sd 0:0:0:0: [sda] Write Protect is off
- [ 8.747907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 8.747931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 8.747983] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
- [ 8.748203] device: 'sda': device_add
- [ 8.748309] PM: Adding info for No Bus:sda
- [ 8.748734] device: '8:0': device_add
- [ 8.748809] PM: Adding info for No Bus:8:0
- [ 8.756528] sda: sda1 sda2 sda3 sda4
- [ 8.756597] device: 'sda1': device_add
- [ 8.756694] PM: Adding info for No Bus:sda1
- [ 8.756906] device: 'sda2': device_add
- [ 8.756988] PM: Adding info for No Bus:sda2
- [ 8.757047] device: 'sda3': device_add
- [ 8.757127] PM: Adding info for No Bus:sda3
- [ 8.757186] device: 'sda4': device_add
- [ 8.757264] PM: Adding info for No Bus:sda4
- [ 8.757409] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 8.757428] driver: 'sd': driver_bound: bound to device '0:0:0:0'
- [ 8.757444] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
- [ 8.757448] sd 0:0:0:0: async probe completed
- [ 8.860067] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 8.862147] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100)
- [ 8.862178] ata2: limiting SATA link speed to 3.0 Gbps
- [ 9.055632] usb 1-1: device descriptor read/64, error -110
- [ 9.379582] usb 1-1: New USB device found, idVendor=1005, idProduct=b113, bcdDevice= 1.00
- [ 9.379613] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 9.379630] usb 1-1: Product: USB FLASH DRIVE
- [ 9.379646] usb 1-1: Manufacturer:
- [ 9.379662] usb 1-1: SerialNumber: 07102A6E2915C261
- [ 9.379685] device: '1-1': device_add
- [ 9.379826] bus: 'usb': add device 1-1
- [ 9.379864] PM: Adding info for usb:1-1
- [ 9.379974] bus: 'usb': __driver_probe_device: matched device 1-1 with driver usb
- [ 9.379978] bus: 'usb': really_probe: probing driver usb with device 1-1
- [ 9.379990] usb 1-1: no default pinctrl state
- [ 9.380830] device: '1-1:1.0': device_add
- [ 9.380917] bus: 'usb': add device 1-1:1.0
- [ 9.380943] PM: Adding info for usb:1-1:1.0
- [ 9.380969] bus: 'usb': __driver_probe_device: matched device 1-1:1.0 with driver usb-storage
- [ 9.380972] bus: 'usb': really_probe: probing driver usb-storage with device 1-1:1.0
- [ 9.380984] usb-storage 1-1:1.0: no default pinctrl state
- [ 9.381002] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 9.381398] device: 'scsi_tmf_2': device_add
- [ 9.381411] bus: 'workqueue': add device scsi_tmf_2
- [ 9.381459] PM: Adding info for workqueue:scsi_tmf_2
- [ 9.381554] scsi host2: usb-storage 1-1:1.0
- [ 9.381629] device: 'host2': device_add
- [ 9.381639] bus: 'scsi': add device host2
- [ 9.381676] PM: Adding info for scsi:host2
- [ 9.381689] device: 'host2': device_add
- [ 9.381788] PM: Adding info for No Bus:host2
- [ 9.381810] driver: 'usb-storage': driver_bound: bound to device '1-1:1.0'
- [ 9.381828] bus: 'usb': really_probe: bound device 1-1:1.0 to driver usb-storage
- [ 9.381841] device: 'ep_81': device_add
- [ 9.381903] PM: Adding info for No Bus:ep_81
- [ 9.381914] device: 'ep_02': device_add
- [ 9.381969] PM: Adding info for No Bus:ep_02
- [ 9.381972] driver: 'usb': driver_bound: bound to device '1-1'
- [ 9.381991] bus: 'usb': really_probe: bound device 1-1 to driver usb
- [ 9.382010] device: 'ep_00': device_add
- [ 9.382073] PM: Adding info for No Bus:ep_00
- [ 9.935633] usb 3-3: new full-speed USB device number 2 using ohci-pci
- [ 10.200856] usb 3-3: New USB device found, idVendor=0cf3, idProduct=3004, bcdDevice= 0.01
- [ 10.200886] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 10.200908] device: '3-3': device_add
- [ 10.201152] bus: 'usb': add device 3-3
- [ 10.201189] PM: Adding info for usb:3-3
- [ 10.201303] bus: 'usb': __driver_probe_device: matched device 3-3 with driver usb
- [ 10.201306] bus: 'usb': really_probe: probing driver usb with device 3-3
- [ 10.201319] usb 3-3: no default pinctrl state
- [ 10.202891] device: '3-3:1.0': device_add
- [ 10.203096] bus: 'usb': add device 3-3:1.0
- [ 10.203123] PM: Adding info for usb:3-3:1.0
- [ 10.203154] device: 'ep_81': device_add
- [ 10.203209] PM: Adding info for No Bus:ep_81
- [ 10.203218] device: 'ep_82': device_add
- [ 10.203272] PM: Adding info for No Bus:ep_82
- [ 10.203281] device: 'ep_02': device_add
- [ 10.203333] PM: Adding info for No Bus:ep_02
- [ 10.203337] device: '3-3:1.1': device_add
- [ 10.203473] bus: 'usb': add device 3-3:1.1
- [ 10.203496] PM: Adding info for usb:3-3:1.1
- [ 10.203517] device: 'ep_83': device_add
- [ 10.203573] PM: Adding info for No Bus:ep_83
- [ 10.203581] device: 'ep_03': device_add
- [ 10.203633] PM: Adding info for No Bus:ep_03
- [ 10.203637] driver: 'usb': driver_bound: bound to device '3-3'
- [ 10.203670] bus: 'usb': really_probe: bound device 3-3 to driver usb
- [ 10.203697] device: 'ep_00': device_add
- [ 10.203765] PM: Adding info for No Bus:ep_00
- [ 10.428085] scsi 2:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 4
- [ 10.428326] device: 'target2:0:0': device_add
- [ 10.428351] bus: 'scsi': add device target2:0:0
- [ 10.428398] PM: Adding info for scsi:target2:0:0
- [ 10.428420] device: '2:0:0:0': device_add
- [ 10.428520] bus: 'scsi': add device 2:0:0:0
- [ 10.428557] PM: Adding info for scsi:2:0:0:0
- [ 10.428568] scsi 2:0:0:0: scheduling asynchronous probe
- [ 10.428578] device: '2:0:0:0': device_add
- [ 10.428608] bus: 'scsi': __driver_probe_device: matched device 2:0:0:0 with driver sd
- [ 10.428617] bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
- [ 10.428643] PM: Adding info for No Bus:2:0:0:0
- [ 10.428644] sd 2:0:0:0: no default pinctrl state
- [ 10.428669] device: '2:0:0:0': device_add
- [ 10.428739] PM: Adding info for No Bus:2:0:0:0
- [ 10.428871] device: '2:0:0:0': device_add
- [ 10.428988] PM: Adding info for No Bus:2:0:0:0
- [ 10.485636] usb 1-4: new high-speed USB device number 4 using ehci-pci
- [ 10.725279] usb 1-4: New USB device found, idVendor=0bda, idProduct=5728, bcdDevice= 0.13
- [ 10.725310] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
- [ 10.725328] usb 1-4: Product: Lenovo EasyCamera
- [ 10.725344] usb 1-4: Manufacturer: CINDC3980
- [ 10.725360] usb 1-4: SerialNumber: 200901010001
- [ 10.725381] device: '1-4': device_add
- [ 10.725608] bus: 'usb': add device 1-4
- [ 10.725650] PM: Adding info for usb:1-4
- [ 10.725766] bus: 'usb': __driver_probe_device: matched device 1-4 with driver usb
- [ 10.725769] bus: 'usb': really_probe: probing driver usb with device 1-4
- [ 10.725782] usb 1-4: no default pinctrl state
- [ 10.727532] device: '1-4:1.0': device_add
- [ 10.727679] bus: 'usb': add device 1-4:1.0
- [ 10.727705] PM: Adding info for usb:1-4:1.0
- [ 10.728707] device: 'ep_83': device_add
- [ 10.728776] PM: Adding info for No Bus:ep_83
- [ 10.728781] device: '1-4:1.1': device_add
- [ 10.728900] bus: 'usb': add device 1-4:1.1
- [ 10.728925] PM: Adding info for usb:1-4:1.1
- [ 10.728941] driver: 'usb': driver_bound: bound to device '1-4'
- [ 10.728977] bus: 'usb': really_probe: bound device 1-4 to driver usb
- [ 10.728995] device: 'ep_00': device_add
- [ 10.729063] PM: Adding info for No Bus:ep_00
- [ 11.103912] sd 2:0:0:0: [sdb] 60532992 512-byte logical blocks: (31.0 GB/28.9 GiB)
- [ 11.104723] sd 2:0:0:0: [sdb] Write Protect is off
- [ 11.104744] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 11.105452] sd 2:0:0:0: [sdb] No Caching mode page found
- [ 11.105473] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 11.105594] device: 'sdb': device_add
- [ 11.105730] PM: Adding info for No Bus:sdb
- [ 11.106052] device: '8:16': device_add
- [ 11.106113] PM: Adding info for No Bus:8:16
- [ 11.133166] sdb: sdb1 sdb10
- [ 11.133245] device: 'sdb1': device_add
- [ 11.133348] PM: Adding info for No Bus:sdb1
- [ 11.133448] device: 'sdb10': device_add
- [ 11.133535] PM: Adding info for No Bus:sdb10
- [ 11.133664] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 11.133684] driver: 'sd': driver_bound: bound to device '2:0:0:0'
- [ 11.133710] bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
- [ 11.133715] sd 2:0:0:0: async probe completed
- [ 13.975971] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
- [ 14.297133] ata2.00: ATA-8: TOSHIBA MQ01ABF050, AM0Q5E, max UDMA/100
- [ 14.297706] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 14.300348] ata2.00: configured for UDMA/100
- [ 14.305262] device: ':ata2--scsi:1:0:0:0': device_add
- [ 14.305341] scsi 1:0:0:0: Linked as a consumer to ata2
- [ 14.305408] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 5E PQ: 0 ANSI: 5
- [ 14.305669] device: 'target1:0:0': device_add
- [ 14.305682] bus: 'scsi': add device target1:0:0
- [ 14.305722] PM: Adding info for scsi:target1:0:0
- [ 14.305740] device: '1:0:0:0': device_add
- [ 14.305875] bus: 'scsi': add device 1:0:0:0
- [ 14.305916] PM: Adding info for scsi:1:0:0:0
- [ 14.305925] scsi 1:0:0:0: scheduling asynchronous probe
- [ 14.305936] device: '1:0:0:0': device_add
- [ 14.305938] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
- [ 14.305942] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
- [ 14.305959] sd 1:0:0:0: no default pinctrl state
- [ 14.306005] PM: Adding info for No Bus:1:0:0:0
- [ 14.306035] device: '1:0:0:0': device_add
- [ 14.306100] PM: Adding info for No Bus:1:0:0:0
- [ 14.306151] device: '1:0:0:0': device_add
- [ 14.306263] PM: Adding info for No Bus:1:0:0:0
- [ 14.306349] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
- [ 14.306383] sd 1:0:0:0: [sdc] 4096-byte physical blocks
- [ 14.306416] sd 1:0:0:0: [sdc] Write Protect is off
- [ 14.306436] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 14.306460] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 14.306516] sd 1:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
- [ 14.306751] device: 'sdc': device_add
- [ 14.306883] PM: Adding info for No Bus:sdc
- [ 14.307175] device: '8:32': device_add
- [ 14.307238] PM: Adding info for No Bus:8:32
- [ 14.425408] sdc: sdc1
- [ 14.425478] device: 'sdc1': device_add
- [ 14.425602] PM: Adding info for No Bus:sdc1
- [ 14.425766] sd 1:0:0:0: [sdc] Attached SCSI disk
- [ 14.425785] driver: 'sd': driver_bound: bound to device '1:0:0:0'
- [ 14.425803] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
- [ 14.425807] sd 1:0:0:0: async probe completed
- [ 14.949352] EXT4-fs (sdb1): orphan cleanup on readonly fs
- [ 14.950063] EXT4-fs (sdb1): mounted filesystem d33c71d1-ec7e-4c2f-8423-731bbf214074 ro with ordered data mode. Quota mode: none.
- [ 14.950160] VFS: Mounted root (ext4 filesystem) readonly on device 8:17.
- [ 14.950761] Freeing unused kernel image (initmem) memory: 1372K
- [ 15.025654] Write protecting the kernel read-only data: 18432k
- [ 15.026237] Freeing unused kernel image (rodata/data gap) memory: 1164K
- [ 15.028064] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 15.028081] x86/mm: Checking user space page tables
- [ 15.028256] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 15.028316] Run /sbin/init as init process
- [ 15.028332] with arguments:
- [ 15.028333] /sbin/init
- [ 15.028333] with environment:
- [ 15.028334] HOME=/
- [ 15.028335] TERM=linux
- [ 15.028336] BOOT_IMAGE=/boot//vmlinuz-6.6.6
- [ 15.028337] slub_debug=FZ
- [ 15.028340] pti=on
- [ 15.028340] tsx=off
- [ 15.783806] udevd[156]: starting version 3.2.14
- [ 17.655528] random: crng init done
- [ 18.013425] udevd[156]: specified group 'sgx' unknown
- [ 18.054286] udevd[157]: starting eudev-3.2.14
- [ 18.087250] udevd[157]: specified group 'sgx' unknown
- [ 18.234954] bus: 'acpi': add driver button
- [ 18.234976] bus: 'acpi': __driver_probe_device: matched device PNP0C0C:00 with driver button
- [ 18.234980] bus: 'acpi': really_probe: probing driver button with device PNP0C0C:00
- [ 18.234994] button PNP0C0C:00: no default pinctrl state
- [ 18.235030] device: 'input4': device_add
- [ 18.235160] PM: Adding info for No Bus:input4
- [ 18.235203] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
- [ 18.235311] device: 'wakeup27': device_add
- [ 18.235388] ACPI: button: Power Button [PWRB]
- [ 18.235405] driver: 'button': driver_bound: bound to device 'PNP0C0C:00'
- [ 18.235431] bus: 'acpi': really_probe: bound device PNP0C0C:00 to driver button
- [ 18.235451] bus: 'acpi': __driver_probe_device: matched device PNP0C0D:00 with driver button
- [ 18.235453] bus: 'acpi': really_probe: probing driver button with device PNP0C0D:00
- [ 18.235462] button PNP0C0D:00: no default pinctrl state
- [ 18.235502] device: 'input5': device_add
- [ 18.235635] PM: Adding info for No Bus:input5
- [ 18.235664] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
- [ 18.235704] device: 'wakeup28': device_add
- [ 18.275548] device: 'wakeup28': device_unregister
- [ 18.275721] ACPI: button: Lid Switch [LID]
- [ 18.275744] driver: 'button': driver_bound: bound to device 'PNP0C0D:00'
- [ 18.275783] bus: 'acpi': really_probe: bound device PNP0C0D:00 to driver button
- [ 18.275789] bus: 'acpi': __driver_probe_device: matched device LNXPWRBN:00 with driver button
- [ 18.275792] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00
- [ 18.275810] button LNXPWRBN:00: no default pinctrl state
- [ 18.275924] device: 'input6': device_add
- [ 18.276098] PM: Adding info for No Bus:input6
- [ 18.276133] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
- [ 18.276187] device: 'wakeup28': device_add
- [ 18.276269] device: 'wakeup28': device_unregister
- [ 18.276307] ACPI: button: Power Button [PWRF]
- [ 18.276324] driver: 'button': driver_bound: bound to device 'LNXPWRBN:00'
- [ 18.276344] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button
- [ 18.292232] bus: 'acpi': add driver battery
- [ 18.292295] bus: 'acpi': __driver_probe_device: matched device PNP0C0A:00 with driver battery
- [ 18.292300] bus: 'acpi': really_probe: probing driver battery with device PNP0C0A:00
- [ 18.292322] battery PNP0C0A:00: no default pinctrl state
- [ 18.296140] bus: 'acpi': add driver tiny-power-button
- [ 18.307856] bus: 'pci': add driver piix4_smbus
- [ 18.307891] bus: 'pci': __driver_probe_device: matched device 0000:00:14.0 with driver piix4_smbus
- [ 18.307896] bus: 'pci': really_probe: probing driver piix4_smbus with device 0000:00:14.0
- [ 18.307913] piix4_smbus 0000:00:14.0: no default pinctrl state
- [ 18.307958] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20230628/utaddress-204)
- [ 18.307997] ACPI: OSL: Resource conflict; ACPI support missing from driver?
- [ 18.308034] piix4_smbus: probe of 0000:00:14.0 rejects match -19
- [ 18.350068] device: 'event0': device_add
- [ 18.350145] PM: Adding info for No Bus:event0
- [ 18.350289] device: 'event1': device_add
- [ 18.350356] PM: Adding info for No Bus:event1
- [ 18.350436] device: 'event2': device_add
- [ 18.350498] PM: Adding info for No Bus:event2
- [ 18.350577] device: 'event3': device_add
- [ 18.350638] PM: Adding info for No Bus:event3
- [ 18.350716] device: 'event4': device_add
- [ 18.350779] PM: Adding info for No Bus:event4
- [ 18.350868] device: 'event5': device_add
- [ 18.350928] PM: Adding info for No Bus:event5
- [ 18.351240] bus: 'acpi': add driver ac
- [ 18.351264] bus: 'acpi': __driver_probe_device: matched device ACPI0003:00 with driver ac
- [ 18.351269] bus: 'acpi': really_probe: probing driver ac with device ACPI0003:00
- [ 18.351284] ac ACPI0003:00: no default pinctrl state
- [ 18.353838] device: 'ACAD': device_add
- [ 18.353923] PM: Adding info for No Bus:ACAD
- [ 18.353937] device: 'ACAD': dev_uevent: class uevent() returned -11
- [ 18.353982] device: 'ACAD': dev_uevent: class uevent() returned -11
- [ 18.354002] device: 'wakeup28': device_add
- [ 18.354088] ACPI: AC: AC Adapter [ACAD] (on-line)
- [ 18.354116] driver: 'ac': driver_bound: bound to device 'ACPI0003:00'
- [ 18.354144] bus: 'acpi': really_probe: bound device ACPI0003:00 to driver ac
- [ 18.390948] device class 'sound': registering
- [ 18.395609] device class 'rfkill': registering
- [ 18.395678] device: 'rfkill': device_add
- [ 18.395749] PM: Adding info for No Bus:rfkill
- [ 18.445843] device: 'BAT1': device_add
- [ 18.446033] PM: Adding info for No Bus:BAT1
- [ 18.446051] device: 'BAT1': dev_uevent: class uevent() returned -11
- [ 18.446091] ACPI: battery: Slot [BAT1] (battery present)
- [ 18.446206] device: 'wakeup29': device_add
- [ 18.446313] driver: 'battery': driver_bound: bound to device 'PNP0C0A:00'
- [ 18.446353] bus: 'acpi': really_probe: bound device PNP0C0A:00 to driver battery
- [ 18.462259] device class 'leds': registering
- [ 18.472236] bus: 'pci': add driver xhci_hcd
- [ 18.472257] bus: 'pci': __driver_probe_device: matched device 0000:00:10.0 with driver xhci_hcd
- [ 18.472262] bus: 'pci': really_probe: probing driver xhci_hcd with device 0000:00:10.0
- [ 18.472276] xhci_hcd 0000:00:10.0: no default pinctrl state
- [ 18.472781] xhci_hcd 0000:00:10.0: xHCI Host Controller
- [ 18.472819] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
- [ 18.473049] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
- [ 18.473964] device: 'wakeup30': device_add
- [ 18.474080] xhci_hcd 0000:00:10.0: xHCI Host Controller
- [ 18.474114] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
- [ 18.474143] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
- [ 18.476643] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
- [ 18.476667] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 18.476689] usb usb5: Product: xHCI Host Controller
- [ 18.476706] usb usb5: Manufacturer: Linux 6.6.6 xhci-hcd
- [ 18.476724] usb usb5: SerialNumber: 0000:00:10.0
- [ 18.476747] device: 'usb5': device_add
- [ 18.476880] bus: 'usb': add device usb5
- [ 18.476966] PM: Adding info for usb:usb5
- [ 18.477160] bus: 'usb': __driver_probe_device: matched device usb5 with driver usb
- [ 18.477163] bus: 'usb': really_probe: probing driver usb with device usb5
- [ 18.477219] device: '5-0:1.0': device_add
- [ 18.477267] bus: 'usb': add device 5-0:1.0
- [ 18.477302] PM: Adding info for usb:5-0:1.0
- [ 18.477335] bus: 'usb': __driver_probe_device: matched device 5-0:1.0 with driver hub
- [ 18.477337] bus: 'usb': really_probe: probing driver hub with device 5-0:1.0
- [ 18.477351] hub 5-0:1.0: no default pinctrl state
- [ 18.477370] hub 5-0:1.0: USB hub found
- [ 18.477423] hub 5-0:1.0: 2 ports detected
- [ 18.477494] device: 'usb5-port1': device_add
- [ 18.477576] PM: Adding info for No Bus:usb5-port1
- [ 18.477592] usb usb5-port1: adding component (ops 0xffffffff81eb67c0)
- [ 18.477611] device: 'usb5-port2': device_add
- [ 18.477683] PM: Adding info for No Bus:usb5-port2
- [ 18.477695] usb usb5-port2: adding component (ops 0xffffffff81eb67c0)
- [ 18.477750] driver: 'hub': driver_bound: bound to device '5-0:1.0'
- [ 18.477784] bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub
- [ 18.477798] device: 'ep_81': device_add
- [ 18.477871] PM: Adding info for No Bus:ep_81
- [ 18.477873] driver: 'usb': driver_bound: bound to device 'usb5'
- [ 18.477906] bus: 'usb': really_probe: bound device usb5 to driver usb
- [ 18.477923] device: 'ep_00': device_add
- [ 18.478010] PM: Adding info for No Bus:ep_00
- [ 18.478078] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 18.478310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
- [ 18.478334] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 18.478355] usb usb6: Product: xHCI Host Controller
- [ 18.478380] usb usb6: Manufacturer: Linux 6.6.6 xhci-hcd
- [ 18.478398] usb usb6: SerialNumber: 0000:00:10.0
- [ 18.478419] device: 'usb6': device_add
- [ 18.478539] bus: 'usb': add device usb6
- [ 18.478628] PM: Adding info for usb:usb6
- [ 18.478826] bus: 'usb': __driver_probe_device: matched device usb6 with driver usb
- [ 18.478829] bus: 'usb': really_probe: probing driver usb with device usb6
- [ 18.478905] device: '6-0:1.0': device_add
- [ 18.478956] bus: 'usb': add device 6-0:1.0
- [ 18.478996] PM: Adding info for usb:6-0:1.0
- [ 18.479023] bus: 'usb': __driver_probe_device: matched device 6-0:1.0 with driver hub
- [ 18.479026] bus: 'usb': really_probe: probing driver hub with device 6-0:1.0
- [ 18.479038] hub 6-0:1.0: no default pinctrl state
- [ 18.479056] hub 6-0:1.0: USB hub found
- [ 18.479105] hub 6-0:1.0: 2 ports detected
- [ 18.479184] device: 'usb6-port1': device_add
- [ 18.479255] PM: Adding info for No Bus:usb6-port1
- [ 18.479267] usb usb6-port1: adding component (ops 0xffffffff81eb67c0)
- [ 18.479297] device: 'usb6-port2': device_add
- [ 18.479411] PM: Adding info for No Bus:usb6-port2
- [ 18.479423] usb usb6-port2: adding component (ops 0xffffffff81eb67c0)
- [ 18.479484] driver: 'hub': driver_bound: bound to device '6-0:1.0'
- [ 18.479513] bus: 'usb': really_probe: bound device 6-0:1.0 to driver hub
- [ 18.479527] device: 'ep_81': device_add
- [ 18.479610] PM: Adding info for No Bus:ep_81
- [ 18.479613] driver: 'usb': driver_bound: bound to device 'usb6'
- [ 18.479647] bus: 'usb': really_probe: bound device usb6 to driver usb
- [ 18.479662] device: 'ep_00': device_add
- [ 18.479759] PM: Adding info for No Bus:ep_00
- [ 18.479763] driver: 'xhci_hcd': driver_bound: bound to device '0000:00:10.0'
- [ 18.479797] bus: 'pci': really_probe: bound device 0000:00:10.0 to driver xhci_hcd
- [ 18.497105] device class 'watchdog': registering
- [ 18.525162] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
- [ 18.525191] bus: 'platform': add driver sp5100-tco
- [ 18.525315] Registering platform device 'sp5100-tco'. Parent at platform
- [ 18.525320] device: 'sp5100-tco': device_add
- [ 18.525335] bus: 'platform': add device sp5100-tco
- [ 18.525400] PM: Adding info for platform:sp5100-tco
- [ 18.525431] bus: 'platform': __driver_probe_device: matched device sp5100-tco with driver sp5100-tco
- [ 18.525436] bus: 'platform': really_probe: probing driver sp5100-tco with device sp5100-tco
- [ 18.525452] sp5100-tco sp5100-tco: no default pinctrl state
- [ 18.525551] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
- [ 18.525614] device: 'watchdog': device_add
- [ 18.525698] PM: Adding info for No Bus:watchdog
- [ 18.525822] device: 'watchdog0': device_add
- [ 18.525927] PM: Adding info for No Bus:watchdog0
- [ 18.526006] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
- [ 18.526026] driver: 'sp5100-tco': driver_bound: bound to device 'sp5100-tco'
- [ 18.526057] bus: 'platform': really_probe: bound device sp5100-tco to driver sp5100-tco
- [ 18.537037] bus: 'pci': add driver alx
- [ 18.537062] bus: 'pci': __driver_probe_device: matched device 0000:02:00.0 with driver alx
- [ 18.537066] bus: 'pci': really_probe: probing driver alx with device 0000:02:00.0
- [ 18.537080] alx 0000:02:00.0: no default pinctrl state
- [ 18.547968] device: 'eth0': device_add
- [ 18.548199] PM: Adding info for No Bus:eth0
- [ 18.548717] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:a7:f7:22]
- [ 18.548744] driver: 'alx': driver_bound: bound to device '0000:02:00.0'
- [ 18.548779] bus: 'pci': really_probe: bound device 0000:02:00.0 to driver alx
- [ 18.558273] device class 'hwmon': registering
- [ 18.565220] bus: 'serio': add driver serio_raw
- [ 18.592274] device: 'timer': device_add
- [ 18.592370] PM: Adding info for No Bus:timer
- [ 18.597729] bus: 'platform': add driver acpi-cpufreq
- [ 18.597753] bus: 'platform': __driver_probe_device: matched device acpi-cpufreq with driver acpi-cpufreq
- [ 18.597758] bus: 'platform': really_probe: probing driver acpi-cpufreq with device acpi-cpufreq
- [ 18.597772] acpi-cpufreq acpi-cpufreq: no default pinctrl state
- [ 18.598272] acpi_cpufreq: overriding BIOS provided _PSD data
- [ 18.599203] driver: 'acpi-cpufreq': driver_bound: bound to device 'acpi-cpufreq'
- [ 18.599242] bus: 'platform': really_probe: bound device acpi-cpufreq to driver acpi-cpufreq
- [ 18.599711] bus: 'pci': add driver k10temp
- [ 18.599740] bus: 'pci': __driver_probe_device: matched device 0000:00:18.3 with driver k10temp
- [ 18.599746] bus: 'pci': really_probe: probing driver k10temp with device 0000:00:18.3
- [ 18.599762] k10temp 0000:00:18.3: no default pinctrl state
- [ 18.599834] device: 'hwmon0': device_add
- [ 18.599979] PM: Adding info for No Bus:hwmon0
- [ 18.600018] driver: 'k10temp': driver_bound: bound to device '0000:00:18.3'
- [ 18.600048] bus: 'pci': really_probe: bound device 0000:00:18.3 to driver k10temp
- [ 18.622015] device: 'input2::numlock': device_add
- [ 18.622141] PM: Adding info for No Bus:input2::numlock
- [ 18.622233] device: 'input2::capslock': device_add
- [ 18.622331] PM: Adding info for No Bus:input2::capslock
- [ 18.622398] device: 'input2::scrolllock': device_add
- [ 18.622478] PM: Adding info for No Bus:input2::scrolllock
- [ 18.645055] bus: 'wmi': add driver ideapad_wmi
- [ 18.645238] bus: 'platform': add driver ideapad_acpi
- [ 18.645242] bus: 'platform': add driver wdat_wdt
- [ 18.645271] bus: 'platform': __driver_probe_device: matched device wdat_wdt with driver wdat_wdt
- [ 18.645276] bus: 'platform': __driver_probe_device: matched device VPC2004:00 with driver ideapad_acpi
- [ 18.645278] bus: 'platform': really_probe: probing driver wdat_wdt with device wdat_wdt
- [ 18.645280] bus: 'platform': really_probe: probing driver ideapad_acpi with device VPC2004:00
- [ 18.645303] ideapad_acpi VPC2004:00: no default pinctrl state
- [ 18.645303] wdat_wdt wdat_wdt: no default pinctrl state
- [ 18.645377] wdat_wdt wdat_wdt: can't request region for resource [mem 0xfec000f0-0xfec000f3]
- [ 18.645400] device: 'wakeup31': device_add
- [ 18.645411] wdat_wdt: probe of wdat_wdt failed with error -16
- [ 18.706170] device: 'input7': device_add
- [ 18.706475] PM: Adding info for No Bus:input7
- [ 18.706582] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input7
- [ 18.706677] device: 'event6': device_add
- [ 18.706830] PM: Adding info for No Bus:event6
- [ 18.707021] ideapad_acpi VPC2004:00: Keyboard backlight control not available
- [ 18.708195] bus: 'usb': add driver uas
- [ 18.708365] usbcore: registered new interface driver uas
- [ 18.752146] bus: 'serio': add driver psmouse
- [ 18.752789] bus: 'serio': __driver_probe_device: matched device serio1 with driver psmouse
- [ 18.752797] bus: 'serio': really_probe: probing driver psmouse with device serio1
- [ 18.752827] psmouse serio1: no default pinctrl state
- [ 18.809944] mc: Linux media interface: v0.10
- [ 18.810104] bus: 'media': registered
- [ 18.835812] device: 'rfkill0': device_add
- [ 18.836054] PM: Adding info for No Bus:rfkill0
- [ 18.859931] bus: 'hdaudio': registered
- [ 18.897780] bus: 'usb': add driver rtsx_usb
- [ 18.897819] bus: 'usb': __driver_probe_device: matched device 2-2:1.0 with driver rtsx_usb
- [ 18.897825] bus: 'usb': really_probe: probing driver rtsx_usb with device 2-2:1.0
- [ 18.897849] rtsx_usb 2-2:1.0: no default pinctrl state
- [ 18.898405] device class 'ieee80211': registering
- [ 18.898753] Registering platform device 'regulatory.0'. Parent at platform
- [ 18.898759] device: 'regulatory.0': device_add
- [ 18.898776] bus: 'platform': add device regulatory.0
- [ 18.898831] PM: Adding info for platform:regulatory.0
- [ 18.898879] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 18.899445] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 18.900614] Registering platform device 'rtsx_usb_sdmmc.1.auto'. Parent at 2-2:1.0
- [ 18.900625] device: 'rtsx_usb_sdmmc.1.auto': device_add
- [ 18.900651] bus: 'platform': add device rtsx_usb_sdmmc.1.auto
- [ 18.900754] PM: Adding info for platform:rtsx_usb_sdmmc.1.auto
- [ 18.900844] Registering platform device 'rtsx_usb_ms.2.auto'. Parent at 2-2:1.0
- [ 18.900853] device: 'rtsx_usb_ms.2.auto': device_add
- [ 18.900877] bus: 'platform': add device rtsx_usb_ms.2.auto
- [ 18.900963] PM: Adding info for platform:rtsx_usb_ms.2.auto
- [ 18.901006] driver: 'rtsx_usb': driver_bound: bound to device '2-2:1.0'
- [ 18.901054] bus: 'usb': really_probe: bound device 2-2:1.0 to driver rtsx_usb
- [ 18.901156] usbcore: registered new interface driver rtsx_usb
- [ 18.925140] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 18.925188] cfg80211: failed to load regulatory.db
- [ 18.955833] device: 'rfkill1': device_add
- [ 18.956101] PM: Adding info for No Bus:rfkill1
- [ 19.044891] videodev: Linux video capture interface: v2.00
- [ 19.044923] device class 'video4linux': registering
- [ 19.069817] bus: 'pci': add driver snd_hda_intel
- [ 19.069851] bus: 'pci': __driver_probe_device: matched device 0000:00:01.1 with driver snd_hda_intel
- [ 19.069857] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:01.1
- [ 19.069880] snd_hda_intel 0000:00:01.1: no default pinctrl state
- [ 19.070808] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
- [ 19.070845] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:01.1'
- [ 19.070916] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver snd_hda_intel
- [ 19.070930] bus: 'pci': __driver_probe_device: matched device 0000:00:14.2 with driver snd_hda_intel
- [ 19.070934] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:14.2
- [ 19.070955] snd_hda_intel 0000:00:14.2: no default pinctrl state
- [ 19.071737] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:14.2'
- [ 19.071791] bus: 'pci': really_probe: bound device 0000:00:14.2 to driver snd_hda_intel
- [ 19.079679] device: 'hdaudioC0D0': device_add
- [ 19.079880] bus: 'hdaudio': add device hdaudioC0D0
- [ 19.079983] PM: Adding info for hdaudio:hdaudioC0D0
- [ 19.082818] snd_hda_intel 0000:00:01.1: Cannot probe codecs, giving up
- [ 19.083313] bus: 'hdaudio': remove device hdaudioC0D0
- [ 19.083318] PM: Removing info for hdaudio:hdaudioC0D0
- [ 19.089123] device: 'hdaudioC1D0': device_add
- [ 19.089212] bus: 'hdaudio': add device hdaudioC1D0
- [ 19.089263] PM: Adding info for hdaudio:hdaudioC1D0
- [ 19.090789] snd_hda_intel 0000:00:14.2: Cannot probe codecs, giving up
- [ 19.091017] bus: 'hdaudio': remove device hdaudioC1D0
- [ 19.091020] PM: Removing info for hdaudio:hdaudioC1D0
- [ 19.095748] ideapad_acpi VPC2004:00: DYTC interface is not available
- [ 19.095793] driver: 'ideapad_acpi': driver_bound: bound to device 'VPC2004:00'
- [ 19.095857] bus: 'platform': really_probe: bound device VPC2004:00 to driver ideapad_acpi
- [ 19.304602] bus: 'usb': add driver uvcvideo
- [ 19.304658] bus: 'usb': __driver_probe_device: matched device 1-4:1.0 with driver uvcvideo
- [ 19.304666] bus: 'usb': really_probe: probing driver uvcvideo with device 1-4:1.0
- [ 19.304695] uvcvideo 1-4:1.0: no default pinctrl state
- [ 19.305862] driver: 'uvcvideo': driver_bound: bound to device '1-4:1.1'
- [ 19.306291] usb 1-4: Found UVC 1.00 device Lenovo EasyCamera (0bda:5728)
- [ 19.317840] device: 'video0': device_add
- [ 19.318103] PM: Adding info for No Bus:video0
- [ 19.318379] device: 'video1': device_add
- [ 19.318584] PM: Adding info for No Bus:video1
- [ 19.318818] device: 'media0': device_add
- [ 19.318850] bus: 'media': add device media0
- [ 19.318952] PM: Adding info for media:media0
- [ 19.319114] driver: 'uvcvideo': driver_bound: bound to device '1-4:1.0'
- [ 19.319186] bus: 'usb': really_probe: bound device 1-4:1.0 to driver uvcvideo
- [ 19.319344] usbcore: registered new interface driver uvcvideo
- [ 19.375160] Bluetooth: Core ver 2.22
- [ 19.375218] device class 'bluetooth': registering
- [ 19.375310] NET: Registered PF_BLUETOOTH protocol family
- [ 19.375330] Bluetooth: HCI device and connection manager initialized
- [ 19.375365] Bluetooth: HCI socket layer initialized
- [ 19.375391] Bluetooth: L2CAP socket layer initialized
- [ 19.375433] Bluetooth: SCO socket layer initialized
- [ 19.485339] bus: 'hdaudio': add driver snd_hda_codec_hdmi
- [ 19.502819] alx 0000:02:00.0 enp2s0: renamed from eth0
- [ 19.502853] net eth0: renaming to enp2s0
- [ 19.529598] bus: 'usb': add driver btusb
- [ 19.529648] bus: 'usb': __driver_probe_device: matched device 3-3:1.0 with driver btusb
- [ 19.529656] bus: 'usb': really_probe: probing driver btusb with device 3-3:1.0
- [ 19.529682] btusb 3-3:1.0: no default pinctrl state
- [ 19.530725] btusb: probe of 3-3:1.0 rejects match -19
- [ 19.530747] bus: 'usb': __driver_probe_device: matched device 3-3:1.1 with driver btusb
- [ 19.530752] bus: 'usb': really_probe: probing driver btusb with device 3-3:1.1
- [ 19.530779] btusb 3-3:1.1: no default pinctrl state
- [ 19.532726] btusb: probe of 3-3:1.1 rejects match -19
- [ 19.532895] usbcore: registered new interface driver btusb
- [ 19.552197] [drm] radeon kernel modesetting enabled.
- [ 19.552264] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
- [ 19.553357] bus: 'hdaudio': add driver snd_hda_codec_generic
- [ 19.553709] ATPX version 1, functions 0x00000003
- [ 19.553734] bus: 'mmc': registered
- [ 19.553739] device class 'mmc_host': registering
- [ 19.553923] bus: 'sdio': registered
- [ 19.554970] bus: 'pci': add driver radeon
- [ 19.555011] bus: 'pci': __driver_probe_device: matched device 0000:00:01.0 with driver radeon
- [ 19.555016] bus: 'pci': really_probe: probing driver radeon with device 0000:00:01.0
- [ 19.555033] radeon 0000:00:01.0: no default pinctrl state
- [ 19.555092] bus: 'platform': remove device platform-framebuffer.0
- [ 19.555094] PM: Removing info for platform:platform-framebuffer.0
- [ 19.555151] radeon 0000:00:01.0: vgaarb: deactivate vga console
- [ 19.555193] device: 'vtcon1': device_add
- [ 19.555277] PM: Adding info for No Bus:vtcon1
- [ 19.556138] Console: switching to colour dummy device 80x25
- [ 19.556155] device: 'vtcon0': device_unregister
- [ 19.556177] PM: Removing info for No Bus:vtcon0
- [ 19.556206] device: 'vtcon0': device_create_release
- [ 19.556973] device: 'renderD128': device_add
- [ 19.557049] PM: Adding info for No Bus:renderD128
- [ 19.557336] device: 'card0': device_add
- [ 19.557413] PM: Adding info for No Bus:card0
- [ 19.557524] [drm] initializing kernel modesetting (ARUBA 0x1002:0x990B 0x17AA:0x3804 0x00).
- [ 19.557621] resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000cbfff window]
- [ 19.557633] caller pci_map_rom+0x63/0x1a0 mapping multiple BARs
- [ 19.559326] ATOM BIOS: 113
- [ 19.559409] radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
- [ 19.559417] radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
- [ 19.559431] [drm] Detected VRAM RAM=768M, BAR=256M
- [ 19.559435] [drm] RAM width 64bits DDR
- [ 19.559806] [drm] radeon: 768M of VRAM memory ready
- [ 19.559816] [drm] radeon: 1024M of GTT memory ready.
- [ 19.559866] [drm] Loading ARUBA Microcode
- [ 19.570724] bus: 'hdaudio': add driver snd_hda_codec_conexant
- [ 19.618911] bus: 'platform': add driver rtsx_usb_sdmmc
- [ 19.618963] platform rtsx_usb_sdmmc.1.auto: probing driver rtsx_usb_sdmmc asynchronously
- [ 19.618991] bus: 'platform': __driver_probe_device: matched device rtsx_usb_sdmmc.1.auto with driver rtsx_usb_sdmmc
- [ 19.619001] bus: 'platform': really_probe: probing driver rtsx_usb_sdmmc with device rtsx_usb_sdmmc.1.auto
- [ 19.619036] rtsx_usb_sdmmc rtsx_usb_sdmmc.1.auto: no default pinctrl state
- [ 19.619183] device: 'wakeup32': device_add
- [ 19.619491] device: 'mmc0::': device_add
- [ 19.619801] PM: Adding info for No Bus:mmc0::
- [ 19.619890] device: 'mmc0': device_add
- [ 19.620110] PM: Adding info for No Bus:mmc0
- [ 19.620411] driver: 'rtsx_usb_sdmmc': driver_bound: bound to device 'rtsx_usb_sdmmc.1.auto'
- [ 19.620470] bus: 'platform': really_probe: bound device rtsx_usb_sdmmc.1.auto to driver rtsx_usb_sdmmc
- [ 19.620481] rtsx_usb_sdmmc rtsx_usb_sdmmc.1.auto: driver rtsx_usb_sdmmc async attach completed: 0
- [ 19.693262] [drm] Internal thermal controller without fan control
- [ 19.693396] device: 'hwmon1': device_add
- [ 19.693685] PM: Adding info for No Bus:hwmon1
- [ 19.693988] [drm] radeon: dpm initialized
- [ 19.698943] kvm_amd: SVM disabled (by BIOS) in MSR_VM_CR on CPU 1
- [ 19.722480] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
- [ 19.722565] [drm] GART: num cpu pages 262144, num gpu pages 262144
- [ 19.775180] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
- [ 19.775617] radeon 0000:00:01.0: WB enabled
- [ 19.775629] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00
- [ 19.776018] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
- [ 19.796268] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18
- [ 19.796279] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c
- [ 19.796288] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04
- [ 19.796297] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08
- [ 19.796305] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c
- [ 19.796312] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10
- [ 19.796757] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
- [ 19.797016] radeon 0000:00:01.0: radeon: using MSI.
- [ 19.797120] [drm] radeon: irq initialized.
- [ 19.815702] [drm] ring test on 0 succeeded in 2 usecs
- [ 19.815713] [drm] ring test on 3 succeeded in 3 usecs
- [ 19.815722] [drm] ring test on 4 succeeded in 3 usecs
- [ 19.861826] [drm] ring test on 5 succeeded in 1 usecs
- [ 19.881854] [drm] UVD initialized successfully.
- [ 19.889912] bus: 'pci': add driver ath9k
- [ 19.889982] bus: 'pci': __driver_probe_device: matched device 0000:03:00.0 with driver ath9k
- [ 19.889990] bus: 'pci': really_probe: probing driver ath9k with device 0000:03:00.0
- [ 19.890021] ath9k 0000:03:00.0: no default pinctrl state
- [ 19.890731] ath: phy0: WB335 2-ANT card detected
- [ 19.890747] ath: phy0: Set BT/WLAN RX diversity capability
- [ 19.897685] ath: phy0: Enable LNA combining
- [ 19.898791] ath: phy0: ASPM enabled: 0x43
- [ 19.898809] ath: EEPROM regdomain: 0x65
- [ 19.898813] ath: EEPROM indicates we should expect a direct regpair map
- [ 19.898821] ath: Country alpha2 being used: 00
- [ 19.898827] ath: Regpair used: 0x65
- [ 19.908943] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 19.908969] device: 'phy0': device_add
- [ 19.909362] PM: Adding info for No Bus:phy0
- [ 19.909625] device: 'rfkill2': device_add
- [ 19.909956] PM: Adding info for No Bus:rfkill2
- [ 19.910207] device: 'wlan0': device_add
- [ 19.910939] PM: Adding info for No Bus:wlan0
- [ 19.911595] device: 'ath9k-phy0': device_add
- [ 19.911834] PM: Adding info for No Bus:ath9k-phy0
- [ 19.911965] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0x000000009b40742c, irq=17
- [ 19.911985] driver: 'ath9k': driver_bound: bound to device '0000:03:00.0'
- [ 19.912069] bus: 'pci': really_probe: bound device 0000:03:00.0 to driver ath9k
- [ 19.914190] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
- [ 19.914200] net wlan0: renaming to wlp3s0
- [ 19.992058] [drm] ring test on 6 succeeded in 18 usecs
- [ 19.992077] [drm] ring test on 7 succeeded in 3 usecs
- [ 19.992082] [drm] VCE initialized successfully.
- [ 19.992256] radeon 0000:00:01.0: adding component (ops radeon_audio_component_bind_ops [radeon])
- [ 19.992431] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 19.992495] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 19.992556] [drm] ib test on ring 4 succeeded in 0 usecs
- [ 20.180431] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
- [ 20.221799] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
- [ 20.263225] psmouse serio1: elantech: Elan sample query result 04, 5c, 85
- [ 20.476415] device: 'input8': device_add
- [ 20.476686] PM: Adding info for No Bus:input8
- [ 20.476774] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
- [ 20.476823] device: 'event7': device_add
- [ 20.476931] PM: Adding info for No Bus:event7
- [ 20.484808] driver: 'psmouse': driver_bound: bound to device 'serio1'
- [ 20.484913] bus: 'serio': really_probe: bound device serio1 to driver psmouse
- [ 20.515732] [drm] ib test on ring 5 succeeded
- [ 21.045742] [drm] ib test on ring 6 succeeded
- [ 21.217077] device: 'mice': device_add
- [ 21.217240] PM: Adding info for No Bus:mice
- [ 21.217491] device: 'mouse0': device_add
- [ 21.217635] PM: Adding info for No Bus:mouse0
- [ 21.217789] mousedev: PS/2 mouse device common for all mice
- [ 21.555725] [drm] ib test on ring 7 succeeded
- [ 21.556610] device: 'i2c-0': device_add
- [ 21.556687] bus: 'i2c': add device i2c-0
- [ 21.556810] PM: Adding info for i2c:i2c-0
- [ 21.557116] device: 'i2c-1': device_add
- [ 21.557179] bus: 'i2c': add device i2c-1
- [ 21.557303] PM: Adding info for i2c:i2c-1
- [ 21.557459] device: 'i2c-2': device_add
- [ 21.557518] bus: 'i2c': add device i2c-2
- [ 21.557643] PM: Adding info for i2c:i2c-2
- [ 21.557799] device: 'i2c-3': device_add
- [ 21.557858] bus: 'i2c': add device i2c-3
- [ 21.557981] PM: Adding info for i2c:i2c-3
- [ 21.558136] device: 'i2c-4': device_add
- [ 21.558197] bus: 'i2c': add device i2c-4
- [ 21.558314] PM: Adding info for i2c:i2c-4
- [ 21.558468] device: 'i2c-5': device_add
- [ 21.558527] bus: 'i2c': add device i2c-5
- [ 21.558655] PM: Adding info for i2c:i2c-5
- [ 21.559362] device: 'card0-eDP-1': device_add
- [ 21.559574] PM: Adding info for No Bus:card0-eDP-1
- [ 21.559869] device: 'i2c-6': device_add
- [ 21.559944] bus: 'i2c': add device i2c-6
- [ 21.560063] PM: Adding info for i2c:i2c-6
- [ 21.560285] device: 'card0-VGA-1': device_add
- [ 21.560495] PM: Adding info for No Bus:card0-VGA-1
- [ 21.560760] device: 'i2c-7': device_add
- [ 21.560830] bus: 'i2c': add device i2c-7
- [ 21.560950] PM: Adding info for i2c:i2c-7
- [ 21.561153] device: 'card0-HDMI-A-1': device_add
- [ 21.561361] PM: Adding info for No Bus:card0-HDMI-A-1
- [ 21.561652] device: 'radeon_bl0': device_add
- [ 21.561889] PM: Adding info for No Bus:radeon_bl0
- [ 21.565886] [drm] radeon atom DIG backlight initialized
- [ 21.565897] [drm] Radeon Display Connectors
- [ 21.565903] [drm] Connector 0:
- [ 21.565909] [drm] eDP-1
- [ 21.565915] [drm] HPD1
- [ 21.565921] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
- [ 21.565933] [drm] Encoders:
- [ 21.565938] [drm] LCD1: INTERNAL_UNIPHY2
- [ 21.565944] [drm] Connector 1:
- [ 21.565950] [drm] VGA-1
- [ 21.565955] [drm] HPD2
- [ 21.565959] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
- [ 21.565970] [drm] Encoders:
- [ 21.565975] [drm] CRT1: INTERNAL_UNIPHY2
- [ 21.565981] [drm] CRT1: NUTMEG
- [ 21.565986] [drm] Connector 2:
- [ 21.565991] [drm] HDMI-A-1
- [ 21.565996] [drm] HPD3
- [ 21.566001] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
- [ 21.566011] [drm] Encoders:
- [ 21.566016] [drm] DFP1: INTERNAL_UNIPHY
- [ 21.743424] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
- [ 23.144683] [drm] fb mappable at 0xD03E9000
- [ 23.144702] [drm] vram apper at 0xD0000000
- [ 23.144709] [drm] size 4325376
- [ 23.144714] [drm] fb depth is 24
- [ 23.144720] [drm] pitch is 5632
- [ 23.144762] fbcon: radeondrmfb (fb0) is primary device
- [ 23.144838] device: 'vtcon0': device_add
- [ 23.144980] PM: Adding info for No Bus:vtcon0
- [ 25.099712] Console: switching to colour frame buffer device 170x48
- [ 25.101230] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
- [ 25.146154] driver: 'radeon': driver_bound: bound to device '0000:00:01.0'
- [ 25.146286] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver radeon
- [ 25.146372] bus: 'pci': __driver_probe_device: matched device 0000:01:00.0 with driver radeon
- [ 25.146378] bus: 'pci': really_probe: probing driver radeon with device 0000:01:00.0
- [ 25.146406] radeon 0000:01:00.0: no default pinctrl state
- [ 25.146585] radeon 0000:01:00.0: enabling device (0000 -> 0003)
- [ 25.147155] device: 'renderD129': device_add
- [ 25.147309] PM: Adding info for No Bus:renderD129
- [ 25.147634] device: 'card1': device_add
- [ 25.147774] PM: Adding info for No Bus:card1
- [ 25.147973] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x17AA:0x3804 0x00).
- [ 25.148090] vga_switcheroo: enabled
- [ 25.240838] ATOM BIOS: Lenovo
- [ 25.240926] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
- [ 25.240956] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
- [ 25.240992] [drm] Detected VRAM RAM=2048M, BAR=256M
- [ 25.241009] [drm] RAM width 64bits DDR
- [ 25.241494] [drm] radeon: 2048M of VRAM memory ready
- [ 25.241549] [drm] radeon: 1024M of GTT memory ready.
- [ 25.241706] [drm] Loading hainan Microcode
- [ 25.953077] [drm] Internal thermal controller without fan control
- [ 25.953241] device: 'hwmon2': device_add
- [ 25.953474] PM: Adding info for No Bus:hwmon2
- [ 25.964322] [drm] radeon: dpm initialized
- [ 25.964347] [drm] GART: num cpu pages 262144, num gpu pages 262144
- [ 25.965200] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
- [ 26.292055] [drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
- [ 26.292359] radeon 0000:01:00.0: WB enabled
- [ 26.292377] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
- [ 26.292404] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
- [ 26.292430] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
- [ 26.292456] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
- [ 26.293041] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
- [ 26.293624] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
- [ 26.294533] radeon 0000:01:00.0: radeon: using MSI.
- [ 26.295243] [drm] radeon: irq initialized.
- [ 26.488667] [drm] ring test on 0 succeeded in 1 usecs
- [ 26.489304] [drm] ring test on 1 succeeded in 1 usecs
- [ 26.489922] [drm] ring test on 2 succeeded in 1 usecs
- [ 26.490543] [drm] ring test on 3 succeeded in 4 usecs
- [ 26.491156] [drm] ring test on 4 succeeded in 3 usecs
- [ 26.491893] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 26.492624] [drm] ib test on ring 1 succeeded in 0 usecs
- [ 26.493344] [drm] ib test on ring 2 succeeded in 0 usecs
- [ 26.494068] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 26.494783] [drm] ib test on ring 4 succeeded in 0 usecs
- [ 26.495798] device: 'i2c-8': device_add
- [ 26.495837] bus: 'i2c': add device i2c-8
- [ 26.495911] PM: Adding info for i2c:i2c-8
- [ 26.496076] device: 'i2c-9': device_add
- [ 26.496115] bus: 'i2c': add device i2c-9
- [ 26.496188] PM: Adding info for i2c:i2c-9
- [ 26.496275] device: 'i2c-10': device_add
- [ 26.496310] bus: 'i2c': add device i2c-10
- [ 26.496378] PM: Adding info for i2c:i2c-10
- [ 26.496462] device: 'i2c-11': device_add
- [ 26.496500] bus: 'i2c': add device i2c-11
- [ 26.496567] PM: Adding info for i2c:i2c-11
- [ 26.496650] device: 'i2c-12': device_add
- [ 26.496684] bus: 'i2c': add device i2c-12
- [ 26.496751] PM: Adding info for i2c:i2c-12
- [ 26.496832] device: 'i2c-13': device_add
- [ 26.496866] bus: 'i2c': add device i2c-13
- [ 26.496937] PM: Adding info for i2c:i2c-13
- [ 26.497020] device: 'i2c-14': device_add
- [ 26.497053] bus: 'i2c': add device i2c-14
- [ 26.497116] PM: Adding info for i2c:i2c-14
- [ 26.497198] device: 'i2c-15': device_add
- [ 26.497229] bus: 'i2c': add device i2c-15
- [ 26.497293] PM: Adding info for i2c:i2c-15
- [ 26.497364] [drm] Radeon Display Connectors
- [ 26.514828] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
- [ 26.515611] radeon 0000:01:00.0: [drm] No compatible format found
- [ 26.516207] radeon 0000:01:00.0: [drm] Cannot find any crtc or sizes
- [ 26.516800] driver: 'radeon': driver_bound: bound to device '0000:01:00.0'
- [ 26.516878] bus: 'pci': really_probe: bound device 0000:01:00.0 to driver radeon
- [ 28.220689] [drm] amdgpu kernel modesetting enabled.
- [ 28.221271] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
- [ 28.223069] amdgpu: ATPX version 1, functions 0x00000003
- [ 28.226924] device class 'kfd': registering
- [ 28.227022] device: 'kfd': device_add
- [ 28.227156] PM: Adding info for No Bus:kfd
- [ 28.227435] amdgpu: Virtual CRAT table created for CPU
- [ 28.228289] amdgpu: Topology: Add CPU node
- [ 28.229074] bus: 'pci': add driver amdgpu
- [ 28.306562] EXT4-fs (sdb1): re-mounted d33c71d1-ec7e-4c2f-8423-731bbf214074 ro. Quota mode: none.
- [ 31.416705] EXT4-fs (sdb1): re-mounted d33c71d1-ec7e-4c2f-8423-731bbf214074 r/w. Quota mode: none.
- [ 41.308774] udevd[157]: specified group 'sgx' unknown
- [ 44.508692] udevd[157]: specified group 'sgx' unknown
- [ 47.304120] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
- [ 47.354208] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 47.354263] wlp3s0: No basic rates, using min rate instead
- [ 47.354282] wlp3s0: 80 MHz not supported, disabling VHT
- [ 47.366280] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 47.367518] wlp3s0: authenticated
- [ 47.375624] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 47.377432] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 47.377452] wlp3s0: No basic rates, using min rate instead
- [ 47.377622] wlp3s0: associated
- [ 47.649878] [drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
- [ 47.650108] radeon 0000:01:00.0: WB enabled
- [ 47.650115] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
- [ 47.650121] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
- [ 47.650127] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
- [ 47.650131] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
- [ 47.650135] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
- [ 47.650468] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
- [ 47.650474] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
- [ 47.650478] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
- [ 47.650482] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
- [ 47.650486] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
- [ 47.850819] [drm] ring test on 0 succeeded in 1 usecs
- [ 47.850830] [drm] ring test on 1 succeeded in 1 usecs
- [ 47.850838] [drm] ring test on 2 succeeded in 1 usecs
- [ 47.850847] [drm] ring test on 3 succeeded in 3 usecs
- [ 47.850856] [drm] ring test on 4 succeeded in 3 usecs
- [ 47.850932] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 47.850994] [drm] ib test on ring 1 succeeded in 0 usecs
- [ 47.851053] [drm] ib test on ring 2 succeeded in 0 usecs
- [ 47.851093] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 47.851130] [drm] ib test on ring 4 succeeded in 0 usecs
- [ 47.909111] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
- [ 59.603617] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 59.603672] wlp3s0: No basic rates, using min rate instead
- [ 59.603692] wlp3s0: 80 MHz not supported, disabling VHT
- [ 59.615418] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 59.616926] wlp3s0: authenticated
- [ 59.625576] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 59.627538] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 59.627559] wlp3s0: No basic rates, using min rate instead
- [ 59.627716] wlp3s0: associated
- [ 59.734685] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
- [ 92.313410] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 92.313464] wlp3s0: No basic rates, using min rate instead
- [ 92.313481] wlp3s0: 80 MHz not supported, disabling VHT
- [ 92.325243] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 92.326904] wlp3s0: authenticated
- [ 92.335672] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 92.337549] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 92.337569] wlp3s0: No basic rates, using min rate instead
- [ 92.337722] wlp3s0: associated
- [ 92.446981] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
- [ 124.084244] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 124.084298] wlp3s0: No basic rates, using min rate instead
- [ 124.084319] wlp3s0: 80 MHz not supported, disabling VHT
- [ 124.096106] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 124.097310] wlp3s0: authenticated
- [ 124.105551] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 124.107400] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 124.107431] wlp3s0: No basic rates, using min rate instead
- [ 124.107584] wlp3s0: associated
- [ 124.214618] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
- [ 161.891484] device: 'vcs2': device_add
- [ 161.891608] PM: Adding info for No Bus:vcs2
- [ 161.891797] device: 'vcsu2': device_add
- [ 161.891934] PM: Adding info for No Bus:vcsu2
- [ 161.892068] device: 'vcsa2': device_add
- [ 161.892180] PM: Adding info for No Bus:vcsa2
- [ 216.743763] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 216.743819] wlp3s0: No basic rates, using min rate instead
- [ 216.743839] wlp3s0: 80 MHz not supported, disabling VHT
- [ 216.755785] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 216.757113] wlp3s0: authenticated
- [ 216.765673] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 216.767679] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 216.767697] wlp3s0: No basic rates, using min rate instead
- [ 216.767841] wlp3s0: associated
- [ 216.875822] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
- [ 238.254654] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
- [ 238.276880] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
- [ 342.293745] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 342.293798] wlp3s0: No basic rates, using min rate instead
- [ 342.293816] wlp3s0: 80 MHz not supported, disabling VHT
- [ 342.305662] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 342.306940] wlp3s0: authenticated
- [ 342.315671] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 342.317572] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 342.317592] wlp3s0: No basic rates, using min rate instead
- [ 342.317739] wlp3s0: associated
- [ 342.424595] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
- [ 467.983858] wlp3s0: authenticate with 50:ff:20:03:f1:5c
- [ 467.983911] wlp3s0: No basic rates, using min rate instead
- [ 467.983931] wlp3s0: 80 MHz not supported, disabling VHT
- [ 467.995800] wlp3s0: send auth to 50:ff:20:03:f1:5c (try 1/3)
- [ 467.997046] wlp3s0: authenticated
- [ 468.005631] wlp3s0: associate with 50:ff:20:03:f1:5c (try 1/3)
- [ 468.007603] wlp3s0: RX AssocResp from 50:ff:20:03:f1:5c (capab=0xc11 status=0 aid=3)
- [ 468.007622] wlp3s0: No basic rates, using min rate instead
- [ 468.007762] wlp3s0: associated
- [ 468.120450] wlp3s0: deauthenticating from 50:ff:20:03:f1:5c by local choice (Reason: 1=UNSPECIFIED)
Add Comment
Please, Sign In to add comment