Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===================================================================
- MT7621 stage1 code Dec 16 2019 17:45:55 (ASIC)
- CPU=500000000 HZ BUS=166666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11100000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-1200Mhz ===
- PLL3 FB_DL: 0xb, 1/0 = 630/394 2D000000
- PLL2 FB_DL: 0xc, 1/0 = 643/381 31000000
- PLL4 FB_DL: 0x12, 1/0 = 720/304 49000000
- DDR patch working
- do DDR setting..[01F40000]
- Apply DDR3 Setting...(use customer AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
- 000E:| 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
- 000F:| 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0
- 0010:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
- 0011:| 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- DRAMC_DQSCTL1[0e0]=13000000
- DRAMC_DQSGCTL[124]=80000033
- rank 0 coarse = 15
- rank 0 fine = 56
- B:| 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0
- opt_dle value:8
- DRAMC_DDR2CTL[07c]=C287220D
- DRAMC_PADCTL4[0e4]=000022B3
- DRAMC_DQIDLY1[210]=0D0E0B0E
- DRAMC_DQIDLY2[214]=0C0F0C0E
- DRAMC_DQIDLY3[218]=0B0A0A0A
- DRAMC_DQIDLY4[21c]=090A0B09
- DRAMC_R0DELDLY[018]=00002221
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 14 10 13 12 14 11 15 11 9 9
- 10 | 10 10 9 11 10 8
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =33 DQS1 = 34
- ==================================================================
- bit DQS0 bit DQS1
- 0 (1~65)33 8 (1~65)33
- 1 (1~64)32 9 (1~66)33
- 2 (1~64)32 10 (1~67)34
- 3 (1~63)32 11 (1~66)33
- 4 (1~65)33 12 (1~67)34
- 5 (1~64)32 13 (1~67)34
- 6 (1~66)33 14 (2~67)34
- 7 (1~64)32 15 (1~65)33
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 14 11 14 13 14 12 15 12 10 10
- 10 | 10 11 9 11 10 9
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
- DQ loop=15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- DRAMC_DQODLY1[200]=88888888
- DRAMC_DQODLY2[204]=88888888
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=500000000 HZ BUS=166666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Mar 2 2021 - 22:11:06)
- Board: Ralink APSoC DRAM: 128 MB
- relocate_code Pointer at: 87fb8000
- Config XHCI 40M PLL
- flash manufacture id: 1c, device id 70 17
- Warning: un-recognized chip ID, please update bootloader!
- *** Warning - bad CRC, using default environment
- ============================================
- Ralink UBoot Version: 5.0.0.0
- --------------------------------------------
- ASIC MT7621A DualCore (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:Mar 2 2021 Time:22:11:06
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- #Reset_MT7530
- gpioMode Reg: 0x4852c
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- 0
- 3: System Boot system code via Flash.
- ## Booting image at bfc20000 ...
- text base: 80001000
- entry point: 80549640
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 80549640) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- LINUX started...
- THIS IS ASIC
- SDK 5.0.S.0
- Linux version 3.10.14 (jenkins@Sohoiipf) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 SMP Tue Mar 2 22:15:56 CST 2021
- The CPU feqenuce set to 880 MHz
- GCMP present
- CPU0 revision is: 0001992f (MIPS 1004Kc)
- Software DMA cache coherency
- Determined physical RAM map:
- memory: 08000000 @ 00000000 (usable)
- Zone ranges:
- Normal [mem 0x00000000-0x07ffffff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x00000000-0x07ffffff]
- On node 0 totalpages: 32768
- free_area_init_node: node 0, pgdat 807c2a40, node_mem_map 81000000
- Normal zone: 256 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 32768 pages, LIFO batch:7
- Detected 3 available secondary CPU(s)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- PERCPU: Embedded 8 pages/cpu @81103000 s10496 r8192 d14080 u32768
- pcpu-alloc: s10496 r8192 d14080 u32768 alloc=8*4096
- pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 init=/sbin/init earlyprintk debug
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Writing ErrCtl register=0000228a
- Readback ErrCtl register=0000228a
- Memory: 121184k/131072k available (5450k kernel code, 9888k reserved, 2500k data, 364k init, 0k highmem)
- Hierarchical RCU implementation.
- NR_IRQS:128
- console [ttyS1] enabled
- Calibrating delay loop... 574.46 BogoMIPS (lpj=1148928)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- ftrace: allocating 15485 entries in 31 pages
- launch: starting cpu1
- launch: cpu1 gone!
- CPU1 revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Synchronize counters for CPU 1: done.
- launch: starting cpu2
- launch: cpu2 gone!
- CPU2 revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Synchronize counters for CPU 2: done.
- launch: starting cpu3
- launch: cpu3 gone!
- CPU3 revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Synchronize counters for CPU 3: done.
- Brought up 4 CPUs
- NET: Registered protocol family 16
- release PCIe RST: RALINK_RSTCTRL = 7000000
- PCIE PHY initialize
- ***** Xtal 40MHz *****
- start MT7621 PCIe register access
- RALINK_RSTCTRL = 7000000
- RALINK_CLKCFG1 = 77ffeff8
- *************** MT7621 PCIe RC mode *************
- PCIE2 no card, disable it(RST&CLK)
- pcie_link status = 0x3
- RALINK_RSTCTRL= 3000000
- *** Configure Device number setting of Virtual PCI-PCI bridge ***
- RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- PCIE0 enabled
- PCIE1 enabled
- interrupt enable status: 300000
- Port 1 N_FTS = 1b105000
- Port 0 N_FTS = 1b105000
- config reg done
- init_rt2880pci done
- FPU Affinity set after 4688 emulations
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
- pci 0000:00:00.0: reg 10: [mem 0x00000000-0x7fffffff]
- pci 0000:00:00.0: reg 14: [mem 0x00000000-0x0000ffff]
- pci 0000:00:00.0: supports D1
- pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
- pci 0000:00:01.0: reg 10: [mem 0x00000000-0x7fffffff]
- pci 0000:00:01.0: reg 14: [mem 0x00000000-0x0000ffff]
- pci 0000:00:01.0: supports D1
- pci 0000:00:01.0: PME# supported from D0 D1 D3hot
- pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
- pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit]
- pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
- pci 0000:02:00.0: reg 10: [mem 0x00000000-0x000fffff 64bit]
- pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
- pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
- pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
- pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- pci 0000:00:00.0: PCI bridge to [bus 01]
- pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
- pci 0000:00:01.0: PCI bridge to [bus 02]
- pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
- PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- BAR0 at slot 0 = 0
- bus=0x0, slot = 0x0
- res[0]->start = 0
- res[0]->end = 0
- res[1]->start = 60200000
- res[1]->end = 6020ffff
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- BAR0 at slot 1 = 0
- bus=0x0, slot = 0x1
- res[0]->start = 0
- res[0]->end = 0
- res[1]->start = 60210000
- res[1]->end = 6021ffff
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- bus=0x1, slot = 0x0, irq=0x4
- res[0]->start = 60000000
- res[0]->end = 600fffff
- res[1]->start = 0
- res[1]->end = 0
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- bus=0x2, slot = 0x1, irq=0x18
- res[0]->start = 60100000
- res[0]->end = 601fffff
- res[1]->start = 0
- res[1]->end = 0
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- Switching to clocksource MIPS
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- PCI: CLS 80 bytes, default 32
- 4 CPUs re-calibrate udelay(lpj = 1167360)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- msgmni has been set to 236
- io scheduler noop registered (default)
- reg_int_mask=0, INT_MASK= 0
- HSDMA_init
- hsdma_phy_tx_ring0 = 0x07dcc000, hsdma_tx_ring0 = 0xa7dcc000
- hsdma_phy_rx_ring0 = 0x07dd0000, hsdma_rx_ring0 = 0xa7dd0000
- TX_CTX_IDX0 = 0
- TX_DTX_IDX0 = 0
- RX_CRX_IDX0 = 3ff
- RX_DRX_IDX0 = 0
- set_fe_HSDMA_glo_cfg
- HSDMA_GLO_CFG = 465
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- TP-LINK gpio driver initialized
- brd: module loaded
- flash manufacture id: 1c, device id 70 17
- Warning: un-recognized chip ID, please update SPI driver!
- EN25Q64(1c 30171c30) (8192 Kbytes)
- mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- Creating 5 MTD partitions on "raspi":
- 0x000000000000-0x000000800000 : "ALL"
- 0x000000000000-0x000000020000 : "fs-uboot"
- 0x000000020000-0x000000350000 : "os-image"
- 0x000000350000-0x0000007c0000 : "file-system"
- 0x0000007f0000-0x000000800000 : "radio"
- register mt_drv
- == pAd = c0181000, size = 4587840, Status=0 ==
- pAd->PciHif.CSRBaseAddress =0xc0080000, csr_addr=0xc0080000!
- RTMPInitPCIeDevice():device_id=0x7615
- mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
- mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
- AP Driver version-5.0.3.1
- RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0
- mt7615_init()-->
- Use 1st iPAeLNA default bin.
- Use 0st /etc/MT7615E_EEPROM1.bin default bin.
- <--mt7615_init()
- <-- RTMPAllocTxRxRingMemory, Status=0
- == pAd = c0701000, size = 4587840, Status=0 ==
- pAd->PciHif.CSRBaseAddress =0xc0600000, csr_addr=0xc0600000!
- RTMPInitPCIeDevice():device_id=0x7615
- mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
- mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
- AP Driver version-5.0.3.1
- RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0
- mt7615_init()-->
- Use 2nd iPAeLNA default bin.
- Use 1st /etc/MT7615E_EEPROM2.bin default bin.
- <--mt7615_init()
- <-- RTMPAllocTxRxRingMemory, Status=0
- rdm_major = 253
- GMAC1_MAC_ADRH -- : 0x0000000c
- GMAC1_MAC_ADRL -- : 0x432880c2
- Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
- GMAC1_MAC_ADRH -- : 0x0000000c
- GMAC1_MAC_ADRL -- : 0x43288059
- PROC INIT OK!
- TCP: cubic registered
- NET: Registered protocol family 17
- 8021q: 802.1Q VLAN Support v1.8
- VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- Freeing unused kernel memory: 364K (807c5000 - 80820000)
- procd: Console is alive
- procd: - preinit -
- mounting /dev/root
- procd: - early -
- procd: - ubus -
- procd: - init -
- Please press Enter to activate this console.
- bridge: Successed to create netlink socket
- liblog: module license 'unspecified' taints kernel.
- Disabling lock debugging due to kernel taint
- reloadprofile() begin
- reloadprofile() end
- reloadconfig() begin
- get_upgrade_level() begin
- /tmp/default-config/config/upgrade: No such file or directory
- ============> upgrade_level = 0
- get_upgrade_level() end
- get_upgrade_level() begin
- /tmp/user-config/config/upgrade: No such file or directory
- ============> upgrade_level = 0
- get_upgrade_level() end
- !!!!===> not do resetandmergeconfig .....
- reloadconfig() end
- user has set country
- device is not production models, do nothing!!!
- loadRepeaterProductInfo() end
- tplink: try to open!
- [GPIOD][gpio_create_ibus_thread:35]create ibus thread successfully
- 0: 0:FFFFFFD8:FFFFFFBA: 5:FFFFFF80
- Raeth v3.1 (Tasklet)
- set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- phy_free_head is 0x6336000!!!
- phy_free_tail_phy is 0x6337ff0!!!
- txd_pool=a6338000 phy_txd_pool=06338000
- ei_local->skb_free start address is 0x86eea6dc.
- free_txd: 06338010, ei_local->cpu_ptr: 06338000
- POOL HEAD_PTR | DMA_PTR | CPU_PTR
- ----------------+---------+--------
- 0xa6338000 0x06338000 0x06338000
- phy_qrx_ring = 0x06332000, qrx_ring = 0xa6332000
- phy_rx_ring0 = 0x06340000, rx_ring0 = 0xa6340000
- MT7530 Reset Completed!!
- change HW-TRAP to 0x17ccf
- set LAN/WAN LLLLW
- GMAC1_MAC_ADRH -- : 0x0000b0a7
- GMAC1_MAC_ADRL -- : 0xb9fa9fe7
- CDMA_CSG_CFG = 81000000
- GDMA1_FWD_CFG = 20710000
- ===>> br_fdb_change_mac_address:163 call fdb_insert
- ===>> fdb_create:549 mac:b0:a7:b9:fa:9f:e7
- ===>> fdb_create:551 fdb.dst is set as null
- fdb_create:543 source is null
- device eth2 entered promiscuous mode
- br-lan: port 1(eth2) entered forwarding state
- br-lan: port 1(eth2) entered forwarding state
- ===>> fdb_insert:630 mac:b0:a7:b9:fa:9f:e7
- ===>> fdb_insert:632 fdb.dst is null, skip and create again
- br-lan: adding interface eth2 with same address as a received packet
- tz isGMT-01:00
- [SMARTIPD] [smartip_create_ibus_thread 40] create ibus thread successfully
- [SMARTIPD] [onemesh_get_mesh_enable 952] Parse JSON failed!
- server: 192.168.0.100wifid[mtk_init_platform:6703]: mtk init platform start.
- wifid[wifi_create_ibus_thread:40]: Create ibus thread successfully
- [SMARTIPD] [smartip_receive_event 66] smartipd received action: 2
- [SMARTIPD] [smartip_receive_event 119] in ibus action wifi: set prelink_status to FALSE
- wifid[wifi_exec_cmd:1930]: iwpriv apclii0 set DfsPrelink=0
- wifid[wifi_get_production_models:460]: get char 0
- wifid[wifi_exec_cmd:1930]: mkdir -p /tmp/wireless/
- wifid[wifi_exec_cmd:1930]: cp /etc/wireless/2G_Profile.dat /tmp/wireless/2G_Profile.dat
- wifid[wifi_exec_cmd:1930]: cp /etc/wireless/5G_Profile.dat /tmp/wireless/5G_Profile.dat
- wifid[_init_config_file:2368]:
- ++++++++l_mtk.DFS_support = TRUE+++++++++
- scanTime_2G:15 scanTime_5G:18
- wifid[wifi_exec_cmd:1930]: wifi forcesetscantime 15 36
- wifid[wifi_exec_cmd:1930]: switch_config.sh 1
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- [SMARTIPD] [smartip_start_process 749] smartipd start udhcpc..........
- [DHCPC] start udhcpc.........
- [DHCPC] Sending discover...at number 0
- [DHCPC] Sending discover...at Unicast
- wifid[wifi_exec_cmd:1930]: ifconra0: ===> main_virtual_if_open
- fig ra0 up
- init l1profile with ra0 dev_idx 1 for index INDEX1
- profile_path=/tmp/wireless/2G_Profile.dat
- EEPROM_name=e2p
- EEPROM_offset=0x0
- EEPROM_size=0x4000
- main_ifname=ra0
- ext_ifname=ra
- apcli_ifname=apcli
- single_sku_path=/etc/wireless/RT2860AP/SingleSKU.dat
- bf_sku_path=/etc/wireless/RT2860AP/SingleSKU_BF.dat
- load l1profile succeed!
- driver_own()::Try to Clear FW Own...
- driver_own()::Success to clear FW Own
- UserCfgInit 1605 Clear ApCliAutoConnectRunning.
- UserCfgInit 1605 Clear ApCliAutoConnectRunning.
- UserCfgInit:1959 pAd->ed_sta_threshold = 1, pAd->ed_ap_threshold = 1
- RtmpOSFileOpen(): Error 2 opening /etc/Wireless/iNIC/iNIC_ap_5G.dat
- Open file "/etc/Wireless/iNIC/iNIC_ap_5G.dat" failed!
- E2pAccessMode=2
- SSID[0]=TP-Link_Extender, EdcaIdx=0
- SSID[1]=, EdcaIdx=0
- DBDC Mode=0, eDBDC_mode = 0
- BSS0 PhyMode=14
- wmode_band_equal(): Band Equal!
- [TxPower] BAND0: 100
- [PERCENTAGEenable] BAND0: 1
- FragThreshold[0]=2346
- pAd->ed_sta_threshold = 2
- read_etxbf: ETxBfEnCond = 1
- read_etxbf: BSSID[0]
- read_etxbf: MBSS[0] ETxBfEnCond = 1
- read_etxbf: More BSSID[1]
- read_etxbf: More MBSS[1] ETxBfEnCond = 1
- [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0
- HT: WDEV[0] Ext Channel = ABOVE
- HT: greenap_cap = 0
- WtcSetMaxStaNum: BssidNum:2, MaxStaNum:123 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:124
- Top Init Done!
- Use alloc_skb
- RX[0] DESC a6da0000 size = 16384
- RX[1] DESC a6da4000 size = 8192
- cut_through_init(): ct sw token number = 4095
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 86bfbf88,86bfbf88
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 86bfbf98,86bfbf98
- Hif Init Done!
- ctl->txq = c0b5b850
- ctl->rxq = c0b5b85c
- ctl->ackq = c0b5b868
- ctl->kickq = c0b5b874
- ctl->tx_doneq = c0b5b880
- ctl->rx_doneq = c0b5b88c
- ====>[debug]ctrl_fw_state_v2: target_stage = 1
- ====>[debug]ctrl_fw_state_v2: sucess, target stage = 1, current sync CR = 1
- Parsing patch header
- Built date: 20191217130820a
- Platform: ALPS
- HW/SW version: 0x8a108a10
- Patch version: 0x00000010
- Target address: 0x80000, length: 11072
- patch is not ready && get semaphore success
- EventGenericEventHandler: CMD Success
- MtCmdPatchFinishReq
- EventGenericEventHandler: CMD Success
- release patch semaphore
- WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
- ====>[debug]ctrl_fw_state_v2: target_stage = 1
- ====>[debug]ctrl_fw_state_v2: sucess, target stage = 1, current sync CR = 1
- Parsing CPU 0 fw tailer
- Chip ID: 0x04
- Eco version: 0x00
- Region number: 0x00
- Format version: 0x00
- Ram version: _reserved_
- Built date: 20191217131156\00
- Common crc: 0x0
- Parsing tailer region 0
- Feature set: 0x01
- Target address: 0x84000, Download size: 409600
- Parsing tailer region 1
- Feature set: 0x01
- Target address: 0x209c400, Download size: 43424
- EventGenericEventHandler: CMD Success
- EventGenericEventHandler: CMD Success
- MtCmdFwStartReq: override = 0x1, address = 0x84000
- EventGenericEventHandler: CMD Success
- Parsing CPU 1 fw tailer
- Chip ID: 0x04
- Eco version: 0x00
- Region number: 0x00
- Format version: 0x00
- Ram version: _reserved_
- Built date: 20181207140436\00
- Common crc: 0x0
- Parsing tailer region 0
- Feature set: 0x01
- Target address: 0x90000000, Download size: 122608
- EventGenericEventHandler: CMD Success
- MtCmdFwStartReq: override = 0x4, address = 0x0
- EventGenericEventHandler: CMD Success
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/t====>[debug]ctrl_fw_state_v2: target_stage = 3
- mp/monitor_runti====>[debug]ctrl_fw_state_v2: target_fw_sync = 7, fw_sync = 3
- me_info' failed
- ====>[debug]ctrl_fw_state_v2: target_fw_sync = 7, fw_sync = 7, OK2
- ====>[debug]ctrl_fw_state_v2: target_fw_sync = 7, fw_sync = 7, i = 13, OK3
- ====>[debug]ctrl_fw_state_v2: sucess, target stage = 3, current sync CR = 7
- MCU Init Done!
- efuse_probe: efuse = 10000212
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- RtmpEepromGetDefault::e2p_dafault=1
- RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
- NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x0]
- ===> tplink: eeFlashId 7615
- [34mNICReadEEPROMParameters: EEPROM 0x52 b300[m
- [34mNICReadEEPROMParameters: EEPROM 0x52 b300[m
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- table: 0x942cb0
- [DHCPC] Sending discover...at number 1
- [DHCPC] Sending discover...at Bcast
- on
- on
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- wpsd[wps_create_ibus_thread:43]: create ibus thread successfully
- wpsd[wpsd_backup_run_mode:1402]: DUT RUNNING AS A SUPER AP!!!
- wpsd[wpsd_backup_RFBand:1325]: RFBand: 2
- wpsd[wpsd_check_available_status:1180]: enabled: 1, apWpsAvailable: 3, staWpsAvailable: 3, pinEnabled: 1, pinCode:38140341\91\84
- wpsd[wpsd_backup_radio_enabled:1496]: wl0_radio_enabled = 1
- wpsd[wpsd_backup_radio_enabled:1497]: wl1_radio_enabled = 1
- !!!!!!!!!!!!!!!!!!!cloud_brd start!!!!!
- !!!!!!!!!!!!!!!!!!cloud-client start!!!
- [cloud_cli.c]: main()->cloud client start.
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- device not binded
- event:11
- ubus call cloud_client response is 0
- nrd doesn't start in AP mode
- {"sun":[],"wed":[],"sat":[],"tue":[],"thu":[],"fri":[],"mon":[]}
- /usr/sbin/tsched_conf -a power_schedule power_schedule '{"sun":[],"wed":[],"sat":[],"tue":[],"thu":[],"fri":[],"mon":[]}'
- /usr/sbin/tsched_conf -u power_schedule
- [DHCPC] Sending discover...at number 2
- [DHCPC] Sending discover...at Unicast
- procd: - init complete -
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- [DHCPC] Sending discover...at number 3
- [DHCPC] Sending discover...at Bcast
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- Country Region from e2p = 1
- mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
- mt7615_antenna_default_reset(): DBDC BAND0 TxPath = 2, RxPath = 2
- mt7615_antenna_default_reset(): DBDC BAND1 TxPath = 2, RxPath = 2
- RcRadioInit(): DbdcMode=0, ConcurrentBand=1
- RcRadioInit(): pRadioCtrl=86d36f14,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
- MtCmdSetDbdcCtrl:(ret = 0)
- [34mMtSingleSkuLoadParam: RF_LOCKDOWN Feature ON !!!
- [0m[34mMtSingleSkuLoadParam: SKU Table index = 0
- [0m===>> tplink: region is DE
- tplink: load sku 2, type is CE
- -----------------------------------------------------------------
- SKU table index: 0
- start channel: 1, ChListNum: 14
- Band: 0
- Channel: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
- CCK: 26 26
- OFDM: 26 26 26 26 26
- VHT20: 26 26 26 26 26 26 26
- VHT40: 26 26 26 26 26 26 26
- VHT80: 0 0 0 0 0 0 0
- VHT160: 0 0 0 0 0 0 0
- TxStreamDelta: 0 0 0 0
- TxNSSDelta: 0 0 0 0
- start channel: 184, ChListNum: 22
- Band: 1
- Channel: 184 188 192 196 8 12 16 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92
- CCK: 0 0
- OFDM: 30 30 30 30 30
- VHT20: 30 30 30 30 30 30 30
- VHT40: 30 30 30 30 30 30 30
- VHT80: 30 30 30 30 30 30 30
- VHT160: 30 30 30 30 30 30 30
- TxStreamDelta: 0 0 0 0
- TxNSSDelta: 0 0 0 0
- start channel: 96, ChListNum: 22
- Band: 1
- Channel: 96 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165 169 173 177 181
- CCK: 0 0
- OFDM: 36 36 36 34 32
- VHT20: 36 36 36 34 32 30 30
- VHT40: 36 36 36 34 32 30 30
- VHT80: 36 36 36 34 32 30 30
- VHT160: 36 36 36 34 32 30 30
- TxStreamDelta: 0 0 0 0
- TxNSSDelta: 0 0 0 0
- -----------------------------------------------------------------
- MtBfBackOffLoadParam: RF_LOCKDOWN Feature ON !!!
- MtBfBackOffLoadParam: BFBackoff Table index = 0
- EEPROM Init Done!
- mt_mac_init()-->
- mt7615_init_mac_cr()-->
- mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
- mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c
- <--mt_mac_init()
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- MAC Init Done!
- MT7615BBPInit():BBP Initialization.....
- Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- MT7615BBPInit() todo
- PHY Init Done!
- MtCmdSetMacTxRx:(ret = 0)
- WifiFwdSet::disabled=0
- Main bssid = 00:00:00:00:00:00
- MtCmdSetMacTxRx:(ret = 0)
- MtCmdSetMacTxRx:(ret = 0)
- <==== mt_wifi_init, Status=0
- TxBfModuleEnCtrl:It's not DBDC mode
- ==>mt_wifi_init:535 EDCCA EDCCACtrl = 1
- MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
- WtcSetMaxStaNum: BssidNum:2, MaxStaNum:123 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:124
- RedInit: set CR4/N9 RED Enable to 1.
- RedInit: RED Initiailize Done.
- cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
- RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e6
- MtCmdSetDbdcCtrl:(ret = 0)
- [1;33m [RadarStateCheck] RD_NORMAL_MODE [m
- MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
- BW = 1,TXStream = 4, RXStream = 4, scan(0)
- [SMARTIPD] [smartip_get_wired_connect_status 505] parse file '/tmp/monitor_runtime_info' failed
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=14, ch=2, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- AP inf up for ra_0(func_idx) OmacIdx=0
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- ApAutoChannelAtBootUp----------------->
- ApAutoChannelAtBootUp: AutoChannelBootup = 0
- ApAutoChannelAtBootUp<-----------------
- [41m ap_run_at_boot() : ACS is disable !![m
- mtk_band_steering_netlink_init 243 band steering netlink init ok
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- APStartUpForMbss: BssIndex = 0 channel = 2
- MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- apidx 0 for WscUUIDInit
- Generate UUID for apidx(0)
- wifid[wifi_exec_cmd:1930]: brctl addif br-lan ra0
- device ra0 entered promiscuous mode
- monitor doing
- br-lan: port 2(ra0) entered forwarding state
- br-lan: port 2(ra0) entered forwarding state
- wifid[wifi_exec_cmd:1930]: ifconfig rai0 up
- rai0: ===> main_virtual_if_open
- init l1profile with rai0 dev_idx 0 for index INDEX0
- profile_path=/tmp/wireless/5G_Profile.dat
- EEPROM_name=e2p
- EEPROM_offset=0x8000
- EEPROM_size=0x4000
- main_ifname=rai0
- ext_ifname=rai
- apcli_ifname=apclii
- single_sku_path=/etc/wireless/RT2860AP/SingleSKU.dat
- bf_sku_path=/etc/wireless/RT2860AP/SingleSKU_BF.dat
- load l1profile succeed!
- driver_own()::Try to Clear FW Own...
- driver_own()::Success to clear FW Own
- UserCfgInit 1605 Clear ApCliAutoConnectRunning.
- UserCfgInit 1605 Clear ApCliAutoConnectRunning.
- UserCfgInit:1959 pAd->ed_sta_threshold = 1, pAd->ed_ap_threshold = 1
- RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860/RT2860_5G.dat
- Open file "/etc/Wireless/RT2860/RT2860_5G.dat" failed!
- E2pAccessMode=2
- SSID[0]=TP-Link_Extender_5GHz, EdcaIdx=0
- SSID[1]=, EdcaIdx=0
- DBDC Mode=0, eDBDC_mode = 0
- BSS0 PhyMode=49
- wmode_band_equal(): Band Equal!
- [TxPower] BAND0: 100
- [PERCENTAGEenable] BAND0: 1
- FragThreshold[0]=2346
- pAd->ed_sta_threshold = 1
- pAd->ed_ap_threshold = 1
- read_etxbf: ETxBfEnCond = 1
- read_etxbf: BSSID[0]
- read_etxbf: MBSS[0] ETxBfEnCond = 1
- read_etxbf: More BSSID[1]
- read_etxbf: More MBSS[1] ETxBfEnCond = 1
- HT: WDEV[0] Ext Channel = ABOVE
- HT: greenap_cap = 0
- WtcSetMaxStaNum: BssidNum:2, MaxStaNum:123 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:124
- Top Init Done!
- Use alloc_skb
- RX[0] DESC a76ec000 size = 16384
- RX[1] DESC a7760000 size = 8192
- cut_through_init(): ct sw token number = 4095
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 850c2608,850c2608
- cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- cut_through_token_list_init(): 850c2618,850c2618
- Hif Init Done!
- ctl->txq = c05db850
- ctl->rxq = c05db85c
- ctl->ackq = c05db868
- ctl->kickq = c05db874
- ctl->tx_doneq = c05db880
- ctl->rx_doneq = c05db88c
- ====>[debug]ctrl_fw_state_v2: target_stage = 1
- ====>[debug]ctrl_fw_state_v2: sucess, target stage = 1, current sync CR = 1
- Parsing patch header
- Built date: 20191217130820a
- Platform: ALPS
- HW/SW version: 0x8a108a10
- Patch version: 0x00000010
- Target address: 0x80000, length: 11072
- patch is not ready && get semaphore success
- EventGenericEventHandler: CMD Success
- MtCmdPatchFinishReq
- EventGenericEventHandler: CMD Success
- release patch semaphore
- WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
- :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
- ====>[debug]ctrl_fw_state_v2: target_stage = 1
- ====>[debug]ctrl_fw_state_v2: sucess, target stage = 1, current sync CR = 1
- Parsing CPU 0 fw tailer
- Chip ID: 0x04
- Eco version: 0x00
- Region number: 0x00
- Format version: 0x00
- Ram version: _reserved_
- Built date: 20191217131156\00
- Common crc: 0x0
- Parsing tailer region 0
- Feature set: 0x01
- Target address: 0x84000, Download size: 409600
- Parsing tailer region 1
- Feature set: 0x01
- Target address: 0x209c400, Download size: 43424
- EventGenericEventHandler: CMD Success
- EventGenericEventHandler: CMD Success
- MtCmdFwStartReq: override = 0x1, address = 0x84000
- EventGenericEventHandler: CMD Success
- Parsing CPU 1 fw tailer
- Chip ID: 0x04
- Eco version: 0x00
- Region number: 0x00
- Format version: 0x00
- Ram version: _reserved_
- Built date: 20181207140436\00
- Common crc: 0x0
- Parsing tailer region 0
- Feature set: 0x01
- Target address: 0x90000000, Download size: 122608
- EventGenericEventHandler: CMD Success
- MtCmdFwStartReq: override = 0x4, address = 0x0
- [DHCPC] Sending discover...at number 4
- [DHCPC] Sending discover...at Unicast
- EventGenericEventHandler: CMD Success
- ====>[debug]ctrl_fw_state_v2: target_stage = 3
- ====>[debug]ctrl_fw_state_v2: target_fw_sync = 7, fw_sync = 3
- ====>[debug]ctrl_fw_state_v2: target_fw_sync = 7, fw_sync = 7, OK2
- ====>[debug]ctrl_fw_state_v2: target_fw_sync = 7, fw_sync = 7, i = 43, OK3
- ====>[debug]ctrl_fw_state_v2: sucess, target stage = 3, current sync CR = 7
- MCU Init Done!
- efuse_probe: efuse = 10000212
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- RtmpEepromGetDefault::e2p_dafault=1
- RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
- NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x8000]
- ===> tplink: eeFlashId 7615
- [34mNICReadEEPROMParameters: EEPROM 0x52 b300[m
- [34mNICReadEEPROMParameters: EEPROM 0x52 b300[m
- [DHCPC] Sending discover...at number 5
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 6
- [DHCPC] Sending discover...at Unicast
- Country Region from e2p = 1
- mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
- mt7615_antenna_default_reset(): DBDC BAND0 TxPath = 2, RxPath = 2
- mt7615_antenna_default_reset(): DBDC BAND1 TxPath = 2, RxPath = 2
- RcRadioInit(): DbdcMode=0, ConcurrentBand=1
- RcRadioInit(): pRadioCtrl=876e2f14,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
- MtCmdSetDbdcCtrl:(ret = 0)
- [34mMtSingleSkuLoadParam: RF_LOCKDOWN Feature ON !!!
- [0m[34mMtSingleSkuLoadParam: SKU Table index = 0
- [0m===>> tplink: region is DE
- tplink: load sku 2, type is CE
- -----------------------------------------------------------------
- SKU table index: 0
- start channel: 1, ChListNum: 14
- Band: 0
- Channel: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
- CCK: 26 26
- OFDM: 26 26 26 26 26
- VHT20: 26 26 26 26 26 26 26
- VHT40: 26 26 26 26 26 26 26
- VHT80: 0 0 0 0 0 0 0
- VHT160: 0 0 0 0 0 0 0
- TxStreamDelta: 0 0 0 0
- TxNSSDelta: 0 0 0 0
- start channel: 184, ChListNum: 22
- Band: 1
- Channel: 184 188 192 196 8 12 16 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92
- CCK: 0 0
- OFDM: 30 30 30 30 30
- VHT20: 30 30 30 30 30 30 30
- VHT40: 30 30 30 30 30 30 30
- VHT80: 30 30 30 30 30 30 30
- VHT160: 30 30 30 30 30 30 30
- TxStreamDelta: 0 0 0 0
- TxNSSDelta: 0 0 0 0
- start channel: 96, ChListNum: 22
- Band: 1
- Channel: 96 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165 169 173 177 181
- CCK: 0 0
- OFDM: 36 36 36 34 32
- VHT20: 36 36 36 34 32 30 30
- VHT40: 36 36 36 34 32 30 30
- VHT80: 36 36 36 34 32 30 30
- VHT160: 36 36 36 34 32 30 30
- TxStreamDelta: 0 0 0 0
- TxNSSDelta: 0 0 0 0
- -----------------------------------------------------------------
- MtBfBackOffLoadParam: RF_LOCKDOWN Feature ON !!!
- MtBfBackOffLoadParam: BFBackoff Table index = 0
- EEPROM Init Done!
- mt_mac_init()-->
- mt7615_init_mac_cr()-->
- mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
- mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c
- <--mt_mac_init()
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- MAC Init Done!
- MT7615BBPInit():BBP Initialization.....
- Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- MT7615BBPInit() todo
- PHY Init Done!
- MtCmdSetMacTxRx:(ret = 0)
- WifiFwdSet::disabled=0
- Main bssid = 00:00:00:00:00:00
- MtCmdSetMacTxRx:(ret = 0)
- MtCmdSetMacTxRx:(ret = 0)
- <==== mt_wifi_init, Status=0
- TxBfModuleEnCtrl:It's not DBDC mode
- ==>mt_wifi_init:535 EDCCA EDCCACtrl = 1
- MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
- WtcSetMaxStaNum: BssidNum:2, MaxStaNum:123 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:124
- RedInit: set CR4/N9 RED Enable to 1.
- RedInit: RED Initiailize Done.
- cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
- RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e5
- MtCmdSetDbdcCtrl:(ret = 0)
- [1;33m [RadarStateCheck] RD_NORMAL_MODE [m
- MtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0
- BW = 2,TXStream = 4, RXStream = 4, scan(0)
- [DHCPC] Sending discover...at number 7
- [DHCPC] Sending discover...at Bcast
- :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=49, ch=36, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- AP inf up for ra_0(func_idx) OmacIdx=0
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- ApAutoChannelAtBootUp----------------->
- ApAutoChannelAtBootUp: AutoChannelBootup = 0
- ApAutoChannelAtBootUp<-----------------
- [41m ap_run_at_boot() : ACS is disable !![m
- mtk_band_steering_netlink_init 243 band steering netlink init ok
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- APStartUpForMbss: BssIndex = 0 channel = 36
- MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- apidx 0 for WscUUIDInit
- Generate UUID for apidx(0)
- wifid[wifi_exec_cmd:1930]: brctl addif br-lan rai0
- device rai0 entered promiscuous mode
- br-lan: port 3(rai0) entered forwarding state
- br-lan: port 3(rai0) entered forwarding state
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set RTSThrSet_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
- eshold=2346
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set FragThSet_FragThreshold_Proc::set wdev0 FragThreshold=2346)
- reshold=2346
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set BeaconPeriod=100
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set DtimPeriod=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set HtGi=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set BasicRate=15
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set HtBssCoex=0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set HtAmsdu=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 SetEDCCACtrl: BandIdx = 0
- set EDCCACtrl=1
- SetEDCCACtrl: EDCCACtrl = 1
- MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WmmCapable=1
- IF(ra0) Set_WmmCapable_Proc::(bWmmCapable=1)
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set NoForwarding=0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set NoForwardingBTNBSSID=0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set SSID=\T\P\-\L\i\n\k\_\[PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- E\x\t\e\n\d\e\r
- wifi_sys_linkdown(), wdev idx = 0
- smartipd-----upExtEventBeaconLostHandler::FW LOG, Beacon lost (b0:a7:b9:fa:9f:e6), Reason 0x10
- Beacon lost - AP disabled!!!
- date address poobssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- l : start: 100 wifi_sys_close(), wdev idx = 0
- end: 199
- gw_wifi_sys_open(), wdev idx = 0
- str:192.168.0.25wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e6
- 4, dns_str:192.1MtCmdSetDbdcCtrl:(ret = 0)
- 68.0.254
- [SMARTCaller: wlan_operate_init+0xb4/0x12c
- IPD] [smartip_gephy_mode=14, ch=2, wdev_type=1
- nerate_udhcpd_cfht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- g 1901] smartip ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- generate udhcpd wifi_sys_linkup(), wdev idx = 0
- conf read succeswtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- s. readcount = 0bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- [SMARTIPD] [UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- onemesh_get_mesh_enable 952] Parse JSON failed!
- wifid[wifi_execSet_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
- _cmd:1930]: iwpriv rai0 set RTSThreshold=2346
- wifid[wifi_exec_cSet_FragThreshold_Proc::set wdev0 FragThreshold=2346)
- md:1930]: iwpriv rai0 set FragThreshold=2346
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set BeaconPeriod=100
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set DtimPeriod=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set HtGi=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set BasicRate=15
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set HtBssCoex=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set HtAmsdu=1
- wiSetEDCCACtrl: BandIdx = 0
- fid[wifi_exec_cmSetEDCCACtrl: EDCCACtrl = 1
- d:1930]: iwpriv MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- rai0 set EDCCACtrl=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 setIF(ra0) Set_WmmCapable_Proc::(bWmmCapable=1)
- WmmCapable=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set NoForwarding=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set NoForwardingBTNBSSID=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set SSID=\T[PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- \P\-\L\i\n\k\_\Ewifi_sys_linkdown(), wdev idx = 0
- ExtEventBeaconLostHandler::FW LOG, Beacon lost (b0:a7:b9:fa:9f:e5), Reason 0x10
- \x\t\e\n\d\e\r\_ Beacon lost - AP disabled!!!
- \5\G\H\z
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- wifi_sys_close(), wdev idx = 0
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e5
- MtCmdSetDbdcCtrl:(ret = 0)
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=49, ch=36, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set CountryCode=DE
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set CountryRegionABand=1
- wifid[wifi_exec_cmd:1930]: iwprI/F(apcli0) Set_ApCli_Enable_Proc::(enable = 0)
- iv apclii0 set Ahc_radio_res_request(): wdev=2, hobj is not ready!
- pCliEnable=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set VhtBw=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set AutoC[42mSet_AutoChannelSel_Proc: Alg = 3 [m
- hannelSel=3
- [AutoChSelBuildChannelListFor5G] ChListNum5G = 19
- MtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 36 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 40,control_ch2=0, central_chl = 40 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 44,control_ch2=0, central_chl = 44 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 48,control_ch2=0, central_chl = 48 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 52,control_ch2=0, central_chl = 52 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 56,control_ch2=0, central_chl = 56 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 60,control_ch2=0, central_chl = 60 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [DHCPC] Sending discover...at number 8
- [DHCPC] Sending discover...at Unicast
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 64,control_ch2=0, central_chl = 64 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 100,control_ch2=0, central_chl = 100 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 104,control_ch2=0, central_chl = 104 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 108,control_ch2=0, central_chl = 108 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 112,control_ch2=0, central_chl = 112 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 116,control_ch2=0, central_chl = 116 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 120,control_ch2=0, central_chl = 120 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 124,control_ch2=0, central_chl = 124 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 128,control_ch2=0, central_chl = 128 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 132,control_ch2=0, central_chl = 132 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 136,control_ch2=0, central_chl = 136 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- ====================================================================
- Channel 36 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 40 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 44 : Busy Time = 545, Skip Channel = FALSE, BwCap = TRUE
- Channel 48 : Busy Time = 122, Skip Channel = FALSE, BwCap = TRUE
- Channel 52 : Busy Time = 559, Skip Channel = FALSE, BwCap = TRUE
- Channel 56 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 60 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 64 : Busy Time = 49, Skip Channel = FALSE, BwCap = TRUE
- Channel 100 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 104 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 108 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 112 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 116 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 120 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 124 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 128 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 132 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- Channel 136 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE
- ====================================================================
- tp skip dfs channel 52
- tp skip dfs channel 56
- tp skip dfs channel 60
- tp skip dfs channel 64
- tp skip dfs channel 100
- tp skip dfs channel 104
- tp skip dfs channel 108
- tp skip dfs channel 112
- tp skip dfs channel 116
- tp skip dfs channel 120
- tp skip dfs channel 124
- tp skip dfs channel 128
- tp skip dfs channel 132
- tp skip dfs channel 136
- Rule 3 Channel Busy time value : Select Primary Channel 36
- Rule 3 Channel Busy time value : Min Channel Busy = 0
- [DHCPC] Sending Rule 3 Channel Busy time value : BW = 40
- discover...at nu[SelectClearChannelBusyTime] - band0 END
- mber 9
- [DHCPC] AutoChSelScanNextChannel : Current channel = 36 , selected new channel = 36
- Sending discoverMtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 38 DBDCIdx= 0, Band= 0
- ...at Bcast
- BW = 1,TXStream = 4, RXStream = 4, scan(0)
- scan_ch_restore,central ch=38,bw=1
- SYNC - End of SCAN, restore to 1MHz channel 38, Total BSS[00], bscaning[0], ApCliAutoConnectRunning[0], OpMode[1],wdev_type[1]
- @(scan_ch_restore)copy scan tab to pAd->activescantab!!!!!!!
- [SMARTIPD] [smartip_receive_event 66] smartipd received action: 1
- [SMARTIPD] [smartip_ibus_handle_dhcp_event 2819] smartipd handle dhcpc event.
- [SMARTIPD] [smartip_ibus_handle_dhcp_event 2830] smartip: udhcpc detects fail
- smartipd-----update address pool : start: 100 end: 199
- gw_str:192.168.0.254, dns_str:192.168.0.254
- [SMARTIPD] [smartip_generate_udhcpd_cfg 1901] smartip generate udhcpd conf read success. readcount = 0
- [SMARTIPD] [onemesh_get_mesh_enable 952] Parse JSON failed!
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set ChannSet_Channel_Proc()
- el=36
- ===> rtmp_set_channel:661 call mt_validate_dfs_channel_for_cac and bDfsEnable(1)
- rtmp_set_channel 774: send_event_to_network_roaming
- Set_Channel_Proc_by_Wdev::(Channel=36)
- Set_Channel_Proc 465: send_event_to_network_roaming
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set HtBssCoex=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set AP2040Rescan=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WirelMtCmdSetDbdcCtrl:(ret = 0)
- essMode=14
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=49, ch=36, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set HtBw=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set VhtBwMtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0
- =1
- BW = 2,TXStream = 4, RXStream = 4, scan(0)
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set TxPower=100
- Set_TxPower_Proc: BandIdx = 0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set AuthMode=OPEN
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set EncrypType=NONE
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set HideSSID=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set SSID=[PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- \T\P\-\L\i\n\k\_wifi_sys_linkdown(), wdev idx = 0
- \E\x\t\e\n\d\e\rExtEventBeaconLostHandler::FW LOG, Beacon lost (b0:a7:b9:fa:9f:e5), Reason 0x10
- Beacon lost - AP disabled!!!
- \_\5\G\H\z
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- wifi_sys_close(), wdev idx = 0
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e5
- MtCmdSetDbdcCtrl:(ret = 0)
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=49, ch=36, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set CountryCode=DE
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set CountryRegion=1
- wifid[wifi_exec_cmd:1930]: iwpriv apcli0 set ApCI/F(apcli0) Set_ApCli_Enable_Proc::(enable = 0)
- liEnable=0
- hc_radio_res_request(): wdev=2, hobj is not ready!
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set AutoCh[42mSet_AutoChannelSel_Proc: Alg = 3 [m
- annelSel=3
- MtCmdChannelSwitch: control_chl = 1,control_ch2=0, central_chl = 1 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 2 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
- [1;33m [Dot11HCntDownTimeoutAction] 2 [m
- MtCmdSetDfsTxStart:(ret = 0)
- ===> Dot11HCntDownTimeoutAction:394 cac_not_required(0)
- APStop(), oper(2) bssid(0)=b0:a7:b9:fa:9f:e5
- wifi_sys_linkdown(), wdev idx = 0
- ExtEventBeaconLostHandler::FW LOG, Beacon lost (b0:a7:b9:fa:9f:e5), Reason 0x10
- Beacon lost - AP disabled!!!
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- wifi_sys_close(), wdev idx = 0
- <=== APStop()
- APStartUp(), oper(2) bssid(0)=b0:a7:b9:fa:9f:e5
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e5
- MtCmdSetDbdcCtrl:(ret = 0)
- [1;33m [RadarStateCheck] RD_NORMAL_MODE [m
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=49, ch=36, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- AP inf up for ra_0(func_idx) OmacIdx=0
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- ApAutoChannelAtBootUp----------------->
- ApAutoChannelAtBootUp: AutoChannelBootup = 0
- ApAutoChannelAtBootUp<-----------------
- [41m ap_run_at_boot() : ACS is disable !![m
- mtk_band_steering_netlink_init 243 band steering netlink init ok
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- APStartUpForMbss: BssIndex = 0 channel = 36
- MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- apidx 0 for WscUUIDInit
- Generate UUID for apidx(0)
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- APStartUpForMbss: BssIndex = 0 channel = 36
- MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- WifiFwdSet::disabled=0
- Main bssid = b0:a7:b9:fa:9f:e5
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- [AutoChSelScanTimeout] - BandIdx = 0
- ====================================================================
- Channel 1 : Busy Time = 1393, Skip Channel = FALSE, BwCap = TRUE
- Channel 2 : Busy Time = 2147, Skip Channel = FALSE, BwCap = TRUE
- Channel 3 : Busy Time = 1395, Skip Channel = FALSE, BwCap = TRUE
- Channel 4 : Busy Time = 1904, Skip Channel = FALSE, BwCap = TRUE
- Channel 5 : Busy Time = 1690, Skip Channel = FALSE, BwCap = TRUE
- Channel 6 : Busy Time = 1431, Skip Channel = FALSE, BwCap = TRUE
- Channel 7 : Busy Time = 1423, Skip Channel = FALSE, BwCap = TRUE
- Channel 8 : Busy Time = 1031, Skip Channel = FALSE, BwCap = TRUE
- Channel 9 : Busy Time = 1738, Skip Channel = FALSE, BwCap = TRUE
- Channel 10 : Busy Time = 1640, Skip Channel = FALSE, BwCap = TRUE
- Channel 11 : Busy Time = 1982, Skip Channel = FALSE, BwCap = TRUE
- ====================================================================
- Rule 3 Channel Busy time value : Select Primary Channel 8
- Rule 3 Channel Busy time value : Min Channel Busy = 1031
- Rule 3 Channel Busy time value : BW = 20
- [SelectClearChannelBusyTime] - band0 END
- AutoChSelScanNextChannel : Current channel = 2 , selected new channel = 8
- MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
- BW = 1,TXStream = 4, RXStream = 4, scan(0)
- scan_ch_restore,central ch=4,bw=1
- SYNC - End of SCAN, restore to 1MHz channel 4, Total BSS[00], bscaning[0], ApCliAutoConnectRunning[0], OpMode[1],wdev_type[1]
- @(scan_ch_restore)copy scan tab to pAd->activescantab!!!!!!!
- MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- BW = 1,TXStream = 4, RXStream = 4, scan(0)
- APStop(), oper(1) bssid(0)=b0:a7:b9:fa:9f:e6
- wifi_sys_linkdown(), wdev idx = 0
- ExtEventBeaconLostHandler::FW LOG, Beacon lost (b0:a7:b9:fa:9f:e6), Reason 0x10
- Beacon lost - AP disabled!!!
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- wifi_sys_close(), wdev idx = 0
- mlme can't polling to idle, timeout
- <=== APStop()
- APStartUp(), oper(1) bssid(0)=b0:a7:b9:fa:9f:e6
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e6
- MtCmdSetDbdcCtrl:(ret = 0)
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=14, ch=8, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- AP inf up for ra_0(func_idx) OmacIdx=0
- AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- ApAutoChannelAtBootUp----------------->
- ApAutoChannelAtBootUp: AutoChannelBootup = 0
- ApAutoChannelAtBootUp<-----------------
- [41m ap_run_at_boot() : ACS is disable !![m
- mtk_band_steering_netlink_init 243 band steering netlink init ok
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- APStartUpForMbss: BssIndex = 0 channel = 8
- MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- apidx 0 for WscUUIDInit
- Generate UUID for apidx(0)
- [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- APStartUpForMbss: BssIndex = 0 channel = 8
- MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- WifiFwdSet::disabled=0
- Main bssid = b0:a7:b9:fa:9f:e6
- rtmp_set_channel 774: send_event_to_network_roaming
- Set_Channel_Proc_by_Wdev::(Channel=8)
- AutoChSelScanNextChannel 2976: send_event_to_network_roaming
- AutoChSelScanNextChannel::(Channel=8)
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set HtBssCoex=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set AP2040MtCmdSetMacTxRx:(ret = 0)
- Rescan=1
- MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 12,control_ch2=0, central_chl = 12 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- MtCmdChannelSwitch: control_chl = 13,control_ch2=0, central_chl = 13 DBDCIdx= 0, Band= 0
- BW = 0,TXStream = 4, RXStream = 4, scan(1)
- AP OBSS SYNC - BBP R4 to 20MHz.l
- Channel[Idx=4, Ch=5].bEffectedChannel=0x0!
- Channel[Idx=5, Ch=6].bEffectedChannel=0x2!
- needFallBack=TRUE due to OP/OT!
- Channel[Idx=6, Ch=7].bEffectedChannel=0x0!
- Channel[Idx=7, Ch=8].bEffectedChannel=0x0!
- Channel[Idx=8, Ch=9].bEffectedChannel=0x0!
- Channel[Idx=9, Ch=10].bEffectedChannel=0x0!
- Channel[Idx=10, Ch=11].bEffectedChannel=0x2!
- needFallBack=TRUE due to OP/OT!
- Channel[Idx=11, Ch=12].bEffectedChannel=0x0!
- Channel[Idx=12, Ch=13].bEffectedChannel=0x0!
- MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- BW = 1,TXStream = 4, RXStream = 4, scan(0)
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WirelessMode=9
- MtCmdSetDbdcCtrl:(ret = 0)
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=14, ch=8, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set HtBw=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set TxPower=100
- Set_TxPower_Proc: BandIdx = 0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set AuthMode=OPEN
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set EncrypType=NONE
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set HideSSID=0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set SSID=[PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- \T\P\-\L\i\n\k\_wifi_sys_linkdown(), wdev idx = 0
- \E\x\t\e\n\d\e\rExtEventBeaconLostHandler::FW LOG, Beacon lost (b0:a7:b9:fa:9f:e6), Reason 0x10
- Beacon lost - AP disabled!!!
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- wifi_sys_close(), wdev idx = 0
- wifi_sys_open(), wdev idx = 0
- wdev_attr_update(): wdevId0 = b0:a7:b9:fa:9f:e6
- MtCmdSetDbdcCtrl:(ret = 0)
- Caller: wlan_operate_init+0xb4/0x12c
- phy_mode=14, ch=8, wdev_type=1
- ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
- ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
- wifi_sys_linkup(), wdev idx = 0
- wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- LinkToOmacIdx = 0, LinkToWdevType = 1
- bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- wifid[wifi_exec_cmd:1930]: echo 1 > /tmp/wifi_mod_exist
- wifid[wifi_exec_cmd:1930]: echo 1 >/proc/range_extender_config/range_extender_sysmode
- wifid[wifi_exec_cmd:1930]: echo 'ra0:rai0:eth2:ra1:rai1' > /proc/dhcp_hook/dhcp_hook_dev_name
- wifid[wifi_exec_cmd:1930]: /etc/init.d/wps start
- table: 0x7d5cb0
- on
- on
- wpsd[main:2045]: wpsd has been started
- wifid[_acl_reload:815]: ===>> system mode: 1, mesh_enable: 0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set AccessPolicy=0
- wifid[_acl_reload:815]: ===>> system mode: 1, mesh_enable: 0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set AccessPolicy=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscSetupLock=0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscSetupLock=0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscMaxPinAttack=3
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscMaxPinAttack=3
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscSetupLockTime=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscSetupLockTime=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscUUID_E=bc329e001dd811b28601b0a7b9fa9fe6
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscConfMode=7
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscConfStatus=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscMode=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscConfStatus=1
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscMode=1
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set WscVendorPinCode=38140341
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set WscVendorPinCode=38140341
- wifid[wifi_exec_cmd:1930]: wifi chaninfo DE
- wifid[wifi_exec_cmd:1930]: /etc/init.d/access_control reload
- @@@@@@@@access_control run with aclreload
- [DHCPC] Sending discover...at number 0
- [DHCPC] Sending discover...at Unicast
- @@@@@@@@wifi_load succeed then do wifi aclreload...
- wpsd[wps_ubus_wifi_cb:125]: Message: {"action":8}
- wpsd[mtk_process_ibus_msg:993]: ibus event: 3
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 mac 820722RTMPIoctlMAC():after trim space, ptr len=17, pointer(84547000)=82072218=e8afc1e0!
- 18=e8afc1e0
- wifid[wifi_exec_cmd:1930]: killall -s 9 temp_control
- wifid[wifi_exec_cmd:1930]: /sbin/temp_control boot
- wifid[wifi_exec_RTMPIoctlMAC():after trim space, ptr len=17, pointer(84547000)=820d002c=00fe0000!
- cmd:1930]: /sbin/smp.sh wifi
- RTMPIoctlMAC():after trim space, ptr len=17, pointer(84547000)=820d002c=00fe0000!
- RTMPIoctlMAC():after trim space, ptr len=13, pointer(844a5000)=820d0030=7F03!
- RTMPIoctlMAC():after trim space, ptr len=13, pointer(84547000)=820d0030=7F03!
- get 2gtemp = 31, 5gtemp = 34
- RTMPIoctlMAC():after trim space, ptr len=8, pointer(84593000)=820d002c!
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- wifid[mtk_init_platform:6933]: Wifi start begin time: 11, end time:64
- wifid[_mark_down_reboot_time_to_use:5601]: Wifi start need time: 53
- wifid[_mark_down_reboot_time_to_use:5606]: Mark down system start need time: 64
- wifid[mtk_init_platform:6935]: mtk init platform end.
- wifid[wifi_exec_cmd:1930]: echo 1 > /tmp/wifi_init_finish_flag
- wifid[_acl_reload:815]: ===>> system mode: 1, mesh_enable: 0
- wifid[wifi_exec_cmd:1930]: iwpriv ra0 set AccessPolicy=0
- wifid[_acl_reload:815]: ===>> system mode: 1, mesh_enable: 0
- wifid[wifi_exec_cmd:1930]: iwpriv rai0 set AccessPolicy=0
- [DHCPC] Sending discover...at number 1
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 2
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 3
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 4
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 5
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 6
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 7
- [DHCPC] Sending discover...at Bcast
- get 2gtemp = 31, 5gtemp = 34
- RTMPIoctlMAC():after trim space, ptr len=8, pointer(845af000)=820d002c!
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- [DHCPC] Sending discover...at number 8
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 9
- [DHCPC] Sending discover...at Bcast
- [SMARTIPD] [smartip_receive_event 66] smartipd received action: 1
- [SMARTIPD] [smartip_ibus_handle_dhcp_event 2819] smartipd handle dhcpc event.
- [SMARTIPD] [smartip_ibus_handle_dhcp_event 2830] smartip: udhcpc detects fail
- BusyBox v1.22.1 (2021-03-02 22:29:49 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- MM NM MMMMMMM M M
- $MMMMM MMMMM MMMMMMMMMMM MMM MMM
- MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM
- MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM'
- MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM
- MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM
- MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM
- MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM
- MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM
- MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM
- MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM
- MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM
- MMMMMM MMMMN M MMMMMMMMM MMMM MMMM
- MMMM M MMMMMMM M M
- M
- ---------------------------------------------------------------
- For those about to rock... (Attitude Adjustment, r2611)
- ---------------------------------------------------------------
- root@OpenWrt:/#
- root@OpenWrt:/#
- root@OpenWrt:/#
- root@OpenWrt:/# cat /proc/cmdline
- console=ttyS1,57600n8 root=/dev/mtdblock3 init=/sbin/init earlyprintk debug
- root@OpenWrt:/# cat /proc/cpuinfo
- system type : MT7621
- machine : Unknown
- processor : 0
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 0
- VPE : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 1
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 0
- VPE : 1
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 2
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 1
- VPE : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 3
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 1
- VPE : 1
- VCED exceptions : not available
- VCEI exceptions : not available
- root@OpenWrt:/# cat /proc/meminfo
- MemTotal: 121548 kB
- MemFree: 72500 kB
- Buffers: 1352 kB
- Cached: 9332 kB
- SwapCached: 0 kB
- Active: 8212 kB
- Inactive: 7460 kB
- Active(anon): 5048 kB
- Inactive(anon): 1752 kB
- Active(file): 3164 kB
- Inactive(file): 5708 kB
- Unevictable: 0 kB
- Mlocked: 0 kB
- SwapTotal: 0 kB
- SwapFree: 0 kB
- Dirty: 0 kB
- Writeback: 0 kB
- AnonPages: 4972 kB
- Mapped: 2988 kB
- Shmem: 1812 kB
- Slab: 16376 kB
- SReclaimable: 1804 kB
- SUnreclaim: 14572 kB
- KernelStack: 720 kB
- PageTables: 512 kB
- NFS_Unstable: 0 kB
- Bounce: 0 kB
- WritebackTmp: RTMPIoctlMAC():after trim space, ptr len=8, pointer(84491000)=820d002c!
- 0 kB
- CommitLimit: 60772 kB
- Committed_AS: 86804 kB
- VmallocTotal: 1048372 kB
- VmallocUsed: 11432 kB
- VmallocChunk: 1036660 kB
- root@OpenWrt:/# get 2gtemp = 31, 5gtemp = 36
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- root@OpenWrt:/#
- root@OpenWrt:/# cat /proc/devices
- Character devices:
- 1 mem
- 2 pty
- 3 ttyp
- 4 ttyS
- 5 /dev/tty
- 5 /dev/console
- 5 /dev/ptmx
- 10 misc
- 90 mtd
- 128 ptm
- 136 pts
- 239 ralink_spi_flash_chrdev
- 251 apsoc_nvram
- 252 gpio
- 253 rdm0
- Block devices:
- 1 ramdisk
- 259 blkext
- 8 sd
- 31 mtdblock
- 65 sd
- 66 sd
- 67 sd
- 68 sd
- 69 sd
- 70 sd
- 71 sd
- 128 sd
- 129 sd
- 130 sd
- 131 sd
- 132 sd
- 133 sd
- 134 sd
- 135 sd
- root@OpenWrt:/#
- root@OpenWrt:/# [DHCPC] Sending discover...at number 0
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 1
- [DHCPC] Sending discover...at Bcast
- root@OpenWrt:/#
- root@OpenWrt:/# [DHCPC] Sending discover...at number 2
- [DHCPC] Sending discover...at Unicast
- ls /sys/devices/platform
- [1;34malarmtimer[0m [1;34mrt_dma.0[0m [1;34mserial8250[0m [0;0muevent[0m
- root@OpenWrt:/# [DHCPC] Sending discover...at number 3
- [DHCPC] Sending discover...at Bcast
- root@OpenWrt:/#
- root@OpenWrt:/# get 2gtemp = 31, 5gtemp = 36
- RTMPIoctlMAC():after trim space, ptr len=8, pointer(845ad000)=820d002c!
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- [DHCPC] Sending discover...at number 4
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 5
- [DHCPC] Sending discover...at Bcast
- root@OpenWrt:/#
- root@OpenWrt:/# [DHCPC] Sending discover...at number 6
- [DHCPC] Sending discover...at Unicast
- cat /proc/mtd
- dev: size erasesize name
- mtd0: 00800000 00010000 "ALL"
- mtd1: 00020000 00010000 "fs-uboot"
- mtd2: 00330000 00010000 "os-image"
- mtd3: 00470000 00010000 "file-system"
- mtd4: 00010000 00010000 "radio"
- root@OpenWrt:/# [DHCPC] Sending discover...at number 7
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 8
- [DHCPC] Sending discover...at Unicast
- root@OpenWrt:/#
- root@OpenWrt:/# cat /sys/class/mtd/mtd*/offset
- cat: can't open '/sys/class/mtd/mtd*/offset': No such file or directory
- root@OpenWrt:/# [DHCPC] Sending discover...at number 9
- [DHCPC] Sending discover...at Bcast
- root@OpenWrt:/# ifconfig -a[SMARTIPD] [smartip_receive_event 66] smartipd received action: 1
- apcli0 Link encap:Ethernet HWaddr B6:A7:B9:FA:9F:E6
- BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- apclii0 Link encap:Ethernet HWaddr B6:A7:B9:FA:9F:E5
- BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- br-lan Link encap:Ethernet HWaddr B0:A7:B9:FA:9F:E7
- inet addr:192.168.0.254 Bcast:192.168.0.255 Mask:255.255.255.0
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:0 (0.0 B) TX bytes:12024 (11.7 KiB)
- eth2 Link encap:Ethernet HWaddr B0:A7:B9:FA:9F:E7
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:12024 (11.7 KiB)
- Interrupt:3
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- UP LOOPBACK RUNNING MTU:65536 Metric:1
- RX packets:96 errors:0 dropped:0 overruns:0 frame:0
- TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:7324 (7.1 KiB) TX bytes:7324 (7.1 KiB)
- ra0 Link encap:Ethernet HWaddr B0:A7:B9:FA:9F:E6
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- Interrupt:24
- ra1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
- BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- rai0 Link encap:Ethernet HWaddr B0:A7:B9:FA:9F:E5
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- Interrupt:4
- rai1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
- BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- root@OpenWrt:/# [SMARTIPD] [smartip_ibus_handle_dhcp_event 2819] smartipd handle dhcpc event.
- [SMARTIPD] [smartip_ibus_handle_dhcp_event 2830] smartip: udhcpc detects fail
- get 2gtemp = 31, 5gtemp = 38
- RTMPIoctlMAC():after trim space, ptr len=8, pointer(845a9000)=820d002c!
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- root@OpenWrt:/#
- root@OpenWrt:/# ls /sys/class/net
- [1;36mapcli0[0m [1;36mapclii0[0m [1;36mbr-lan[0m [1;36meth2[0m [1;36mlo[0m [1;36mra0[0m [1;36mra1[0m [1;36mrai0[0m [1;36mrai1[0m
- root@OpenWrt:/#
- root@OpenWrt:/# brctl show
- bridge name bridge id STP enabled interfaces
- br-lan 8000.b0a7b9fa9fe7 no eth2
- ra0
- rai0
- root@OpenWrt:/#
- root@OpenWrt:/# cat /sys/kernel/debug/gpio
- cat: can't open '/sys/kernel/debug/gpio': No such file or directory
- root@OpenWrt:/# [DHCPC] Sending discover...at number 0
- [DHCPC] Sending discover...at Unicast
- root@OpenWrt:/# get 2gtemp = 31, 5gtemp = 38
- RTMPIoctlMAC():after trim space, ptr len=8, pointer(844a5000)=820d002c!
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- [DHCPC] Sending discover...at number 1
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 2
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 3
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 4
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 5
- [DHCPC] Sending discover...at Bcast
- [DHCPC] Sending discover...at number 6
- [DHCPC] Sending discover...at Unicast
- [DHCPC] Sending discover...at number 7
- [DHCPC] Sending discover...at Bcast
- get 2gtemp = 33, 5gtemp = 38
- RTMPIoctlMAC():after trim space, ptr len=8, pointer(84599000)=820d002c!
- get2gduty value = [0x2002c]:00fe0000
- 22222 getduty 100
- sleep 20
- [DHCPC] Sending discover...at number 8
- [DHCPC] Sending discover...at Unicast
- Terminating...
- Thanks for using picocom
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement