# The syntax is:
# key=value
# with [default] applying to all machines
# unless they are specifically listed with
# a different settings.

#[machine_name]
# Adjust screen resolution as needed, per client.

#================================
#[192.168.0.10]
#X_MODE_0 = 1280x1024
#X_HORZSYNC = "60-70"
#X_VERTREFRESH = "59-62"

#================================
[default]

#CONFIGURE_X = True

X_MODE_0 = 800X600

#PRINTER_0_WRITE_ONLY = Y        # A fix for slow printing
PRINTER_0_DEVICE   = /dev/lp0   # Client's parallel port
PRINTER_0_TYPE     = P          # P-Parallel, S-Serial
#PRINTER_0_PORT     = 9100       # tcp/ip port: defaults to 9100
#PRINTER_0_SPEED    = 9600       # baud rate: defaults to 9600

#PRINTER_0_FLOWCTRL = H          # Flow control:
                                # H-Hardware (CTS/RTS) (default)
                                # S-Software (XON/XOFF)

#PRINTER_0_PARITY   = N          # Parity: N-None, E-Even, O-Odd
                                 # (defaults to 'N')

#PRINTER_0_DATABITS = 8          # Databits: 5,6,7,8 (defaults to 8)
#-----------------------------------
[achar]
#[192.168.3.54]
#[00:02:a5:79:14:5f]

X_MODE_0 = 800X600

PRINTER_0_DEVICE   = /dev/lp0   # Client's parallel port
PRINTER_0_TYPE     = P          # P-Parallel, S-Serial
PRINTER_0_PORT     = 9100       # tcp/ip port: defaults to 9100
PRINTER_0_SPEED    = 9600       # baud rate: defaults to 9600

#-----------------------------------
[diaz]

X_MODE_0 = 800X600

#-----------------------------------
[jeram]

X_MODE_0 = 800X600

#-----------------------------------
[mola]

X_MODE_0 = 800X600

#-----------------------------------