API tools faq
paste
Advertisement
codekipper

dmesg Beelink GS1

codekipper
Mar 28th, 2021
82
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.31 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.10.26 (marcus@COOPSHTPC) (aarch64-none-linux-gnu-gcc.real (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Sun Mar 28 10:54:00 CEST 2021
  3. [ 0.000000] Machine model: Beelink GS1
  4. [ 0.000000] cma: Reserved 384 MiB at 0x00000000a8000000
  5. [ 0.000000] NUMA: No NUMA configuration found
  6. [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
  7. [ 0.000000] NUMA: NODE_DATA [mem 0xa7bd6100-0xa7bd7fff]
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff]
  10. [ 0.000000] DMA32 empty
  11. [ 0.000000] Normal empty
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
  16. [ 0.000000] On node 0 totalpages: 524288
  17. [ 0.000000] DMA zone: 8192 pages used for memmap
  18. [ 0.000000] DMA zone: 0 pages reserved
  19. [ 0.000000] DMA zone: 524288 pages, LIFO batch:63
  20. [ 0.000000] psci: probing for conduit method from DT.
  21. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  22. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  23. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  24. [ 0.000000] psci: SMC Calling Convention v1.2
  25. [ 0.000000] percpu: Embedded 22 pages/cpu s50200 r8192 d31720 u90112
  26. [ 0.000000] pcpu-alloc: s50200 r8192 d31720 u90112 alloc=22*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  28. [ 0.000000] Detected VIPT I-cache on CPU0
  29. [ 0.000000] CPU features: detected: ARM erratum 845719
  30. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
  31. [ 0.000000] Policy zone: DMA
  32. [ 0.000000] Kernel command line: boot=UUID=1103-2937 disk=UUID=f6b9bebd-9112-4fae-ac35-5082a2e26576 quiet console=ttyS0,115200 console=tty1
  33. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  34. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  35. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  36. [ 0.000000] Memory: 1640648K/2097152K available (12094K kernel code, 1268K rwdata, 4524K rodata, 4416K init, 409K bss, 63288K reserved, 393216K cma-reserved)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  39. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  40. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  41. [ 0.000000] Tracing variant of Tasks RCU enabled.
  42. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  43. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  44. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  45. [ 0.000000] GIC: Using split EOI/Deactivate mode
  46. [ 0.000000] random: get_random_bytes called from start_kernel+0x328/0x4e4 with crng_init=0
  47. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  48. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  49. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  50. [ 0.000263] Console: colour dummy device 80x25
  51. [ 0.000295] printk: console [tty1] enabled
  52. [ 0.000375] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  53. [ 0.000387] pid_max: default: 32768 minimum: 301
  54. [ 0.000474] LSM: Security Framework initializing
  55. [ 0.000543] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  56. [ 0.000562] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  57. [ 0.002267] rcu: Hierarchical SRCU implementation.
  58. [ 0.003311] smp: Bringing up secondary CPUs ...
  59. [ 0.004164] Detected VIPT I-cache on CPU1
  60. [ 0.004232] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  61. [ 0.004957] Detected VIPT I-cache on CPU2
  62. [ 0.004994] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  63. [ 0.005629] Detected VIPT I-cache on CPU3
  64. [ 0.005662] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  65. [ 0.005735] smp: Brought up 1 node, 4 CPUs
  66. [ 0.005743] SMP: Total of 4 processors activated.
  67. [ 0.005750] CPU features: detected: 32-bit EL0 Support
  68. [ 0.005756] CPU features: detected: CRC32 instructions
  69. [ 0.014521] CPU: All CPU(s) started at EL2
  70. [ 0.014546] alternatives: patching kernel code
  71. [ 0.016030] devtmpfs: initialized
  72. [ 0.021991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  73. [ 0.022012] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  74. [ 0.034556] pinctrl core: initialized pinctrl subsystem
  75. [ 0.035629] NET: Registered protocol family 16
  76. [ 0.037462] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  77. [ 0.037611] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  78. [ 0.037805] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  79. [ 0.038353] thermal_sys: Registered thermal governor 'step_wise'
  80. [ 0.038728] cpuidle: using governor menu
  81. [ 0.038863] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  82. [ 0.038957] ASID allocator initialised with 65536 entries
  83. [ 0.039680] Serial: AMBA PL011 UART driver
  84. [ 0.062139] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  85. [ 0.062153] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  86. [ 0.062159] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  87. [ 0.062165] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  88. [ 0.063749] cryptd: max_cpu_qlen set to 1000
  89. [ 0.066546] iommu: Default domain type: Translated
  90. [ 0.066875] SCSI subsystem initialized
  91. [ 0.067001] libata version 3.00 loaded.
  92. [ 0.067224] usbcore: registered new interface driver usbfs
  93. [ 0.067262] usbcore: registered new interface driver hub
  94. [ 0.067298] usbcore: registered new device driver usb
  95. [ 0.067537] mc: Linux media interface: v0.10
  96. [ 0.067564] videodev: Linux video capture interface: v2.00
  97. [ 0.067675] pps_core: LinuxPPS API ver. 1 registered
  98. [ 0.067680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  99. [ 0.067696] PTP clock support registered
  100. [ 0.068142] Advanced Linux Sound Architecture Driver Initialized.
  101. [ 0.068927] clocksource: Switched to clocksource arch_sys_counter
  102. [ 0.069112] VFS: Disk quotas dquot_6.6.0
  103. [ 0.069168] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  104. [ 0.075580] NET: Registered protocol family 2
  105. [ 0.076237] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  106. [ 0.076275] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  107. [ 0.076419] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  108. [ 0.076697] TCP: Hash tables configured (established 16384 bind 16384)
  109. [ 0.076834] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  110. [ 0.076890] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  111. [ 0.077162] NET: Registered protocol family 1
  112. [ 0.077558] RPC: Registered named UNIX socket transport module.
  113. [ 0.077563] RPC: Registered udp transport module.
  114. [ 0.077567] RPC: Registered tcp transport module.
  115. [ 0.077571] RPC: Registered tcp NFSv4.1 backchannel transport module.
  116. [ 0.112481] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  117. [ 0.116782] Initialise system trusted keyrings
  118. [ 0.117025] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  119. [ 0.123672] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  120. [ 0.124519] NFS: Registering the id_resolver key type
  121. [ 0.124549] Key type id_resolver registered
  122. [ 0.124554] Key type id_legacy registered
  123. [ 0.124645] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  124. [ 0.125326] Key type cifs.idmap registered
  125. [ 0.125584] 9p: Installing v9fs 9p2000 file system support
  126. [ 0.171719] NET: Registered protocol family 38
  127. [ 0.171731] Key type asymmetric registered
  128. [ 0.171737] Asymmetric key parser 'x509' registered
  129. [ 0.171783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  130. [ 0.171905] io scheduler mq-deadline registered
  131. [ 0.171910] io scheduler kyber registered
  132. [ 0.172418] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
  133. [ 0.173400] sun4i-usb-phy 5100400.phy: failed to get clock usb0_phy
  134. [ 0.177756] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  135. [ 0.191854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  136. [ 0.195991] cacheinfo: Unable to detect cache hierarchy for CPU 0
  137. [ 0.203627] loop: module loaded
  138. [ 0.259576] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  139. [ 0.259588] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  140. [ 0.260143] libphy: Fixed MDIO Bus: probed
  141. [ 0.260739] tun: Universal TUN/TAP device driver, 1.6
  142. [ 0.263201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  143. [ 0.263208] ehci-platform: EHCI generic platform driver
  144. [ 0.263457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  145. [ 0.263474] ohci-platform: OHCI generic platform driver
  146. [ 0.264155] usbcore: registered new interface driver uas
  147. [ 0.264199] usbcore: registered new interface driver usb-storage
  148. [ 0.266567] sun6i-rtc 7000000.rtc: registered as rtc0
  149. [ 0.266602] sun6i-rtc 7000000.rtc: setting system clock to 2021-03-28T10:04:03 UTC (1616925843)
  150. [ 0.266609] sun6i-rtc 7000000.rtc: RTC enabled
  151. [ 0.266701] i2c /dev entries driver
  152. [ 0.266893] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
  153. [ 0.268731] axp20x-i2c 0-0036: AXP20x variant AXP806 found
  154. [ 0.273385] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0
  155. [ 0.279708] vdd-cpu: supplied by vcc-5v
  156. [ 0.280588] vdd-gpu: supplied by vcc-5v
  157. [ 0.281477] vdd-sys: supplied by vcc-5v
  158. [ 0.282333] vcc-dram: supplied by vcc-5v
  159. [ 0.283178] vcc-pl: supplied by vcc-5v
  160. [ 0.284054] vcc-ac200: supplied by vcc-5v
  161. [ 0.284902] vcc25-dram: supplied by vcc-5v
  162. [ 0.286460] vcc-bias-pll: supplied by vcc-5v
  163. [ 0.287336] vcc-efuse-pcie-hdmi-io: supplied by vcc-5v
  164. [ 0.288183] vcc-dcxoio: supplied by vcc-5v
  165. [ 0.289024] bldo4: supplied by vcc-5v
  166. [ 0.289888] vcc-3v3: supplied by vcc-5v
  167. [ 0.290743] vcc-wifi-1: supplied by vcc-5v
  168. [ 0.291596] vcc-wifi-2: supplied by vcc-5v
  169. [ 0.291804] sw: supplied by regulator-dummy
  170. [ 0.291878] axp20x-i2c 0-0036: AXP20X driver loaded
  171. [ 0.292581] IR NEC protocol handler initialized
  172. [ 0.292585] IR RC5(x/sz) protocol handler initialized
  173. [ 0.292589] IR RC6 protocol handler initialized
  174. [ 0.292593] IR JVC protocol handler initialized
  175. [ 0.292597] IR Sony protocol handler initialized
  176. [ 0.292601] IR SANYO protocol handler initialized
  177. [ 0.292605] IR Sharp protocol handler initialized
  178. [ 0.292609] IR MCE Keyboard/mouse protocol handler initialized
  179. [ 0.292613] IR XMP protocol handler initialized
  180. [ 0.292617] ir_imon_decoder: IR iMON protocol handler initialized
  181. [ 0.292620] IR RCMM protocol handler initialized
  182. [ 0.292677] usbcore: registered new interface driver xbox_remote
  183. [ 0.294087] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  184. [ 0.294714] sdhci: Secure Digital Host Controller Interface driver
  185. [ 0.294718] sdhci: Copyright(c) Pierre Ossman
  186. [ 0.294811] Synopsys Designware Multimedia Card Interface Driver
  187. [ 0.295445] sdhci-pltfm: SDHCI platform and OF driver helper
  188. [ 0.296337] ledtrig-cpu: registered to indicate activity on CPUs
  189. [ 0.296634] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  190. [ 0.296749] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  191. [ 0.297013] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  192. [ 0.297139] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  193. [ 0.297230] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  194. [ 0.297325] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  195. [ 0.297397] sun8i-ce 1904000.crypto: Register cbc(aes)
  196. [ 0.297545] sun8i-ce 1904000.crypto: Register ecb(aes)
  197. [ 0.297652] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  198. [ 0.297754] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  199. [ 0.297854] sun8i-ce 1904000.crypto: Register md5
  200. [ 0.297949] sun8i-ce 1904000.crypto: Register sha1
  201. [ 0.298044] sun8i-ce 1904000.crypto: Register sha224
  202. [ 0.298139] sun8i-ce 1904000.crypto: Register sha256
  203. [ 0.298235] sun8i-ce 1904000.crypto: Register sha384
  204. [ 0.298342] sun8i-ce 1904000.crypto: Register sha512
  205. [ 0.298439] sun8i-ce 1904000.crypto: Register stdrng
  206. [ 0.299125] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  207. [ 0.299632] hid: raw HID events driver (C) Jiri Kosina
  208. [ 0.300226] usbcore: registered new interface driver usbhid
  209. [ 0.300230] usbhid: USB HID core driver
  210. [ 0.300538] random: fast init done
  211. [ 0.302020] random: crng init done
  212. [ 0.303939] Initializing XFRM netlink socket
  213. [ 0.304448] NET: Registered protocol family 10
  214. [ 0.305352] Segment Routing with IPv6
  215. [ 0.305407] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  216. [ 0.305910] NET: Registered protocol family 17
  217. [ 0.306068] 9pnet: Installing 9P2000 support
  218. [ 0.306097] Key type dns_resolver registered
  219. [ 0.306391] registered taskstats version 1
  220. [ 0.306408] Loading compiled-in X.509 certificates
  221. [ 0.324809] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  222. [ 0.325329] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  223. [ 0.325813] printk: console [ttyS0] disabled
  224. [ 0.325893] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 33, base_baud = 1500000) is a 16550A
  225. [ 0.339101] printk: console [ttyS0] enabled
  226. [ 0.340758] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  227. [ 0.340782] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  228. [ 0.340956] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
  229. [ 0.341010] xhci-hcd xhci-hcd.1.auto: irq 40, io mem 0x05200000
  230. [ 0.341752] hub 1-0:1.0: USB hub found
  231. [ 0.341787] hub 1-0:1.0: 1 port detected
  232. [ 0.342058] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  233. [ 0.342073] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  234. [ 0.342088] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  235. [ 0.342142] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  236. [ 0.342583] hub 2-0:1.0: USB hub found
  237. [ 0.342613] hub 2-0:1.0: 1 port detected
  238. [ 0.343593] ehci-platform 5101000.usb: EHCI Host Controller
  239. [ 0.343612] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3
  240. [ 0.343720] ehci-platform 5101000.usb: irq 38, io mem 0x05101000
  241. [ 0.356933] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  242. [ 0.357463] hub 3-0:1.0: USB hub found
  243. [ 0.357491] hub 3-0:1.0: 1 port detected
  244. [ 0.549002] ohci-platform 5101400.usb: Generic Platform OHCI controller
  245. [ 0.549025] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 4
  246. [ 0.549148] ohci-platform 5101400.usb: irq 39, io mem 0x05101400
  247. [ 0.613465] hub 4-0:1.0: USB hub found
  248. [ 0.613495] hub 4-0:1.0: 1 port detected
  249. [ 0.614496] usb_phy_generic usb_phy_generic.2.auto: supply vcc not found, using dummy regulator
  250. [ 0.757139] musb-hdrc musb-hdrc.3.auto: MUSB HDRC host driver
  251. [ 0.757166] musb-hdrc musb-hdrc.3.auto: new USB bus registered, assigned bus number 5
  252. [ 0.757730] hub 5-0:1.0: USB hub found
  253. [ 0.757758] hub 5-0:1.0: 1 port detected
  254. [ 0.761689] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 912000 KHz, changing to: 1080000 KHz
  255. [ 0.763553] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  256. [ 0.763885] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator
  257. [ 0.764668] sunxi-mmc 4020000.mmc: Got CD GPIO
  258. [ 0.768723] scpi_protocol scpi: SCP Protocol 1.2 Firmware 0.3.10000 version
  259. [ 0.773044] sun8i-mixer 1100000.mixer: deferred probe timeout, ignoring dependency
  260. [ 0.773296] sun4i-drm display-engine: deferred probe timeout, ignoring dependency
  261. [ 0.798400] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
  262. [ 0.798749] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
  263. [ 0.799185] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
  264. [ 0.799311] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  265. [ 0.800054] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  266. [ 0.801134] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  267. [ 0.801852] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
  268. [ 0.802150] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  269. [ 0.808728] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  270. [ 0.808848] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  271. [ 0.844754] mmc0: host does not support reading read-only switch, assuming write-enable
  272. [ 0.847503] mmc0: new high speed SDHC card at address aaaa
  273. [ 0.848104] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  274. [ 0.850885] mmcblk0: p1 p2
  275. [ 0.893748] mmc1: new high speed MMC card at address 0001
  276. [ 0.894399] mmcblk1: mmc1:0001 R1J56L 14.7 GiB
  277. [ 0.894755] mmcblk1boot0: mmc1:0001 R1J56L partition 1 8.00 MiB
  278. [ 0.895097] mmcblk1boot1: mmc1:0001 R1J56L partition 2 8.00 MiB
  279. [ 0.896867] mmcblk1: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 >
  280. [ 0.896906] mmcblk1: p1 size 25501696 extends beyond EOD, truncated
  281. [ 0.951662] Console: switching to colour frame buffer device 240x67
  282. [ 1.001177] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  283. [ 1.001858] cedrus 1c0e000.video-codec: deferred probe timeout, ignoring dependency
  284. [ 1.002578] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  285. [ 1.006010] ALSA device list:
  286. [ 1.006022] #0: allwinner-hdmi
  287. [ 1.008723] Freeing unused kernel memory: 4416K
  288. [ 1.008798] Run /init as init process
  289. [ 1.008801] with arguments:
  290. [ 1.008805] /init
  291. [ 1.008808] with environment:
  292. [ 1.008812] HOME=/
  293. [ 1.008815] TERM=linux
  294. [ 1.008819] boot=UUID=1103-2937
  295. [ 1.008823] disk=UUID=f6b9bebd-9112-4fae-ac35-5082a2e26576
  296. [ 1.107169] Checking disk(s): UUID=1103-2937 UUID=f6b9bebd-9112-4fae-ac35-5082a2e26576
  297. [ 1.741505] fsck: CP437: Invalid argument
  298. [ 1.741627] fsck: fsck.fat 4.1 (2017-01-24)
  299. [ 1.741779] fsck: /dev/mmcblk0p1: 24 files, 16404/65501 clusters
  300. [ 1.741959] fsck: STORAGE: clean, 572/3758080 files, 502695/15029760 blocks
  301. [ 2.284131] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  302. [ 2.284169] ext4 filesystem being mounted at /storage supports timestamps until 2038 (0x7fffffff)
  303. [ 2.717555] kernel-overlays-setup: setup base modules
  304. [ 2.762556] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.10.26
  305. [ 2.800454] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  306. [ 2.805349] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  307. [ 2.807723] kernel-overlays-setup: done
  308. [ 3.472427] systemd[1]: systemd 247.3 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  309. [ 3.473466] systemd[1]: Detected architecture arm64.
  310. [ 3.497166] systemd[1]: Set hostname to <LibreELEC>.
  311. [ 3.727547] systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
  312. [ 3.754297] systemd[1]: Created slice system-modprobe.slice.
  313. [ 3.755236] systemd[1]: Created slice User and Session Slice.
  314. [ 3.755463] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  315. [ 3.755598] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  316. [ 3.755802] systemd[1]: Reached target Paths.
  317. [ 3.755887] systemd[1]: Reached target Slices.
  318. [ 3.768155] systemd[1]: Listening on RPCbind Server Activation Socket.
  319. [ 3.768337] systemd[1]: Reached target RPC Port Mapper.
  320. [ 3.768634] systemd[1]: Listening on initctl Compatibility Named Pipe.
  321. [ 3.772627] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  322. [ 3.773969] systemd[1]: Listening on Journal Socket (/dev/log).
  323. [ 3.774515] systemd[1]: Listening on Journal Socket.
  324. [ 3.776167] systemd[1]: Listening on udev Control Socket.
  325. [ 3.776592] systemd[1]: Listening on udev Kernel Socket.
  326. [ 3.780170] systemd[1]: Mounting Huge Pages File System...
  327. [ 3.783847] systemd[1]: Mounting POSIX Message Queue File System...
  328. [ 3.787637] systemd[1]: Mounting Kernel Debug File System...
  329. [ 3.788099] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  330. [ 3.791809] systemd[1]: Mounting Variable Directory...
  331. [ 3.796239] systemd[1]: Starting Create list of static device nodes for the current kernel...
  332. [ 3.800009] systemd[1]: Starting Setup machine-id...
  333. [ 3.804094] systemd[1]: Starting Load Kernel Module configfs...
  334. [ 3.807951] systemd[1]: Starting Load Kernel Module drm...
  335. [ 3.811905] systemd[1]: Starting Load Kernel Module fuse...
  336. [ 3.815629] systemd[1]: Starting Show Version...
  337. [ 3.818669] systemd[1]: Starting Create Persistent Log Directory on /storage...
  338. [ 3.821886] systemd[1]: Starting Mounting swapfile...
  339. [ 3.883877] systemd[1]: Starting Load Kernel Modules...
  340. [ 3.888986] systemd[1]: Starting Setup NTP servers for timesyncd...
  341. [ 3.894539] fuse: init (API version 7.32)
  342. [ 3.895462] systemd[1]: Starting Coldplug All udev Devices...
  343. [ 3.899664] systemd[1]: Starting Wait for Kernel Time Synchronisation...
  344. [ 3.907159] systemd[1]: Mounted Huge Pages File System.
  345. [ 3.907601] systemd[1]: Mounted POSIX Message Queue File System.
  346. [ 3.907906] systemd[1]: Mounted Kernel Debug File System.
  347. [ 3.908180] systemd[1]: Mounted Variable Directory.
  348. [ 3.909750] systemd[1]: Finished Create list of static device nodes for the current kernel.
  349. [ 3.911418] systemd[1]: Finished Setup machine-id.
  350. [ 3.912216] systemd[1]: [email protected]: Succeeded.
  351. [ 3.913382] systemd[1]: Finished Load Kernel Module configfs.
  352. [ 3.914631] systemd[1]: [email protected]: Succeeded.
  353. [ 3.916673] systemd[1]: Finished Load Kernel Module drm.
  354. [ 3.918462] systemd[1]: [email protected]: Succeeded.
  355. [ 3.920336] systemd[1]: Finished Load Kernel Module fuse.
  356. [ 3.922754] systemd[1]: Finished Show Version.
  357. [ 3.924530] systemd[1]: Finished Create Persistent Log Directory on /storage.
  358. [ 3.926496] systemd[1]: Finished Load Kernel Modules.
  359. [ 3.931666] systemd[1]: Mounting FUSE Control File System...
  360. [ 3.935368] systemd[1]: Mounting Kernel Configuration File System...
  361. [ 3.935732] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
  362. [ 3.940413] systemd[1]: Starting Journal Service...
  363. [ 3.943889] systemd[1]: Starting Apply Kernel Variables...
  364. [ 3.947391] systemd[1]: Starting Create Static Device Nodes in /dev...
  365. [ 3.950693] systemd[1]: Finished Setup NTP servers for timesyncd.
  366. [ 3.993141] systemd[1]: Mounted FUSE Control File System.
  367. [ 3.993728] systemd[1]: Mounted Kernel Configuration File System.
  368. [ 4.055017] systemd[1]: Finished Apply Kernel Variables.
  369. [ 4.058375] systemd[1]: Started Journal Service.
  370. [ 4.096094] systemd-journald[286]: Received client request to flush runtime journal.
  371. [ 5.696456] panfrost 1800000.gpu: clock rate = 432000000
  372. [ 5.696481] panfrost 1800000.gpu: bus_clock rate = 200000000
  373. [ 5.697048] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
  374. [ 5.697061] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
  375. [ 5.697067] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
  376. [ 5.697070] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
  377. [ 5.717338] sun50i-di 1420000.deinterlace: Device registered as /dev/video1
  378. [ 5.735858] [drm] Initialized panfrost 1.1.0 20180908 for 1800000.gpu on minor 1
  379. [ 5.842377] Registered IR keymap rc-beelink-gs1
  380. [ 5.842604] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
  381. [ 5.843011] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
  382. [ 5.843301] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input1
  383. [ 5.845467] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found
  384. [ 5.845480] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found
  385. [ 5.845739] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator
  386. [ 5.845944] dwmac-sun8i 5020000.ethernet: PTP uses main clock
  387. [ 5.845975] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000)
  388. [ 5.866448] sunxi-ir 7040000.ir: initialized sunXi IR driver
  389. [ 5.954192] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
  390. [ 5.954204] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
  391. [ 5.954210] dwmac-sun8i 5020000.ethernet: COE Type 2
  392. [ 5.954213] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
  393. [ 5.954216] dwmac-sun8i 5020000.ethernet: Normal descriptors
  394. [ 5.954219] dwmac-sun8i 5020000.ethernet: Chain mode enabled
  395. [ 5.954746] libphy: stmmac: probed
  396. [ 6.409082] EXT4-fs (mmcblk1p1): warning: maximal mount count reached, running e2fsck is recommended
  397. [ 6.409085] EXT4-fs (mmcblk1p16): warning: maximal mount count reached, running e2fsck is recommended
  398. [ 6.411287] EXT4-fs (mmcblk1p16): mounted filesystem with ordered data mode. Opts: (null)
  399. [ 6.411326] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
  400. [ 6.421804] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  401. [ 6.422084] EXT4-fs (mmcblk1p7): warning: maximal mount count reached, running e2fsck is recommended
  402. [ 6.422597] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null)
  403. [ 6.427108] FAT-fs (mmcblk1p13): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  404. [ 6.529241] dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
  405. [ 6.534237] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found
  406. [ 6.534260] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available
  407. [ 6.534266] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW
  408. [ 6.551890] dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii-id link mode
  409. [ 6.794458] input: eventlircd as /devices/virtual/input/input2
  410. [ 9.629932] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  411. [ 9.630001] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  412. [ 9.693655] 8021q: 802.1Q VLAN Support v1.8
  413. [ 17.521196] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  414. [ 17.629050] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  415. [ 25.447799] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  416. [ 25.669233] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  417. [ 25.777199] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  418. [ 25.885657] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  419. [ 25.993057] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  420. [ 26.193061] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  421. [ 40.653171] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  422. [ 40.760989] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  423. [ 40.869294] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  424. [ 40.976992] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  425. [ 41.085174] dw_hdmi_cec_hardirq: stat=11 LOW_DRIVE
  426.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!