Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:80;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
- TE: 87776
- BL2 Built : 13:27:37, Oct 25 2017. gxl g56b77aa - xiaobo.gu@droid12
- set vdd cpu_a to 1120 mv
- set vdd cpu_b to 1050 mv
- set vddee to 1000 mv
- Board ID = 1
- CPU clk: 1200MHz
- DQS-corr enabled
- DDR scramble enabled
- LPDDR3 chl: Rank0+1 @ 768MHz
- bist_test rank: 0 19 0c 27 3M⸮⸮4e 15 02 28 40 26 5b 1c 0a 2f 32 1a 4a 19 04 2e 33 19 4e 715 rank: 1 18 0a 27 34 1c 4d 13 01 25 3e 26 57 1d 0b 2f 32 1a 4a 19 04 2f 30 16 4b 715
- Rank0: 2048MB(auto)-2T-3
- RankL'⸮⸮⸮⸮j ⸮auto)-2T-3
- AddrBus test pass!
- -s
- emmc switch 3 ok
- BL2: rpmb counter: 0x000000ac
- emmc switch 0 ok
- Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
- New fip structure!
- Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000⸮⸮j
- Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
- Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00066c00
- NOTICE: BL3-1: v1.0(release):7c45a4f
- NOTICE: BL3-1: Built : 14:09:28, Oct 13 2017
- !⸮*j⸮ BL31: GXL normal boot!
- NOTICE: BL31: BL33 decompress pass
- mpu_config_enable:ok
- [Image: gxl_v1.1.3255-1a77b01 2017-09-15 16:58:02 xiaobo.gu@droid12]
- OPS=0x82
- wdt: reset registers!
- 68 ed de 3e 1c 0 71 de c5 d5 8c 71 [1.160876 Inits done]
- secure task start!
- high task start!
- low task start!
- ERROR: Error initializing runtime service opteed_fast
- U-Boot 2015.01-g35d0abe-dirty (Apr 11 2018 - 15:54:26)
- DRAM: 3 GiB
- Relocation Offset is: b6eb1000
- register usb cfg[0][1] = 00000000b7f5a738
- [CANVAS]canvas init
- boot_device_flag : 1
- Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
- init bus_cycle=6, bus_timing=7, system=5.0ns
- reset failed
- gdt_chip_type and ret:fffffffe
- get_chip_type and ret:fffffffe
- chip detect failed and ret:fffffffe
- nandphy_init failed and ret=0xfffffff1
- MMC: aml_priv->desc_buf = 0x00000000b3eb16b0
- aml_priv->desc_buf = 0x00000000b3eb39d0
- SDIO Port B: 0, SDIO Port C: 1
- emmc/sd response timeout, cmd8, status=0x1ff2800
- emmc/sd response timeout, cmd55, status=0x1ff2800
- original ext_csd[171] USE_WP field value is 50
- ext_csd[171] USER_WP filed value after switch is 58
- init_part() 293: PART_TYPE_AML
- [mmc_init] mmc init success
- Amlogic multi-dtb tool
- Multi dtb detected
- Multi dtb tool version: v2 .
- Support 2 dtbs.
- aml_dt soc: gxm platform: q201 variant: 3g
- dtb 0 soc: gxm plat: q201 vari: 2g
- dtb 1 soc: gxm plat: q201 vari: 3g
- Find match dtb: 1
- start dts,buffer=00000000b3eb6200,dt_addr=00000000b3ec2200
- Amlogic multi-dtb tool
- Multi dtb detected
- Multi dtb tool version: v2 .
- Support 2 dtbs.
- aml_dt soc: gxm platform: q201 variant: 3g
- dtb 0 soc: gxm plat: q201 vari: 2g
- dtb 1 soc: gxm plat: q201 vari: 3g
- Find match dtb: 1
- parts: 10
- 00: logo 0000000002000000 1
- 01: recovery 0000000002000000 1
- 02: rsW⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮j
- 03: tee 0000000000800000 1
- 04: crypt 0000000002000000 1
- 05: misc 0000000002000000 1
- 06: boot 0000000002000000 1
- 07: system 0000000080000000 1
- 08: cache 0000000020000000 2
- ⸮09: data ffffffffffffffff 4
- init_part() 293: PART_TYPE_AML
- eMMC/TSD partition table have been checked OK!
- check pattern success
- mmc env offset: 0x27400000
- In: serial
- Out: serial
- Err: serial
- reboot_mode=cold_boot
- [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
- _verify_dtb_checksum()-1078: calc 284b9321, store 284b9321
- _verify_dtb_checksum()-1078: calc 284b9321, store 284b9321
- dtb_read()-1200: total valid 2
- dtb_read()-1267: do nothing
- Amlogic multi-dtb tool
- Multi dtb detected
- Multi dtb tool version: v2 .
- Support 2 dtbs.
- aml_d soc: gxm platform: q201 variant: 3g
- dtb 0 soc: gxm plat: q201 vari: 2g
- dtb 1 soc: gxm plat: q201 vari: 3g
- Find match dtb: 1
- vpu: clk_level in dts: 7
- vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
- vpu: vpu_clk_gate_init_off
- vpp: vpp_init
- hpd_state=0
- cvbs performance type = 6, table = 0
- vpp: vpp_pq_load pq val error !!!
- Net: dwmac.c9410000amlkey_init() enter!
- [EFUSE_MSG]keynum is 4
- [BL31]: tee size: 0
- Start read misc partition datas!
- info->attemp_times = 0
- info->active_slot = 0
- info->slot_info[0].bootable = 1
- info->slot_info[0].online = 1
- info->slot_info[1].bootable = 0
- info->slot_info[1].online = 0
- info->attemp_times = 0
- attemp_times = 0
- active slot = 0
- wipe_data=successful
- wipe_cache=successful
- upgrade_step=2
- [OSD]load fb addr from dts
- [OSD]fb_addr for logo: 0x7f851000
- [OSD]load fb addr from dts
- [OSD]fb_addr for logo: 0x7f851000
- [CANVAS]addr=0x7f851000 width=3840, height=2160
- amlkey_init() enter!
- amlkey_init() 71: already init!
- [EFUSE_MSG]keynum is 4
- [BL31]: tee size: 0
- [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
- [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programeʕ⸮5
- gpio: pin GPIOAO_2 (gpio 10>) value is 1
- Hit Enter or space or Ctrl+C key to stop autoboot -- : 1 0
- card out
- emmc/sd response timeout, cmd8, status=0x1ff2800
- emmc/sd response timeout, cmd55, status=0x1ff2800
- emmc/sd response timeout, cmd1, status=0x1ff2800
- emmc/sd response timeout, cmd8, status=0x1ff2800
- emmc/sd response timeout, cmd55, status=0x1ff2800
- emmc/sd response timeout, cmd1, status=0x1ff2800
- ** Bad device mmc 0 **
- (Re)start USB...
- USB0: USB3.0 XHCI init start
- Register 3000140 NbrPorts 3
- Starting the controller
- USB XHCI 1.00
- scanning bus 0 for devices... 2 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- ** Bad device usb 0 **
- ee_gate_off ...
- ## Booting Android Image at 0x01080000 ...
- reloc_addr =b3f36450
- copy done
- load dtb from 0x1000000 ......
- Amlogic multi-dtb tool
- Single dtb detected
- Uncompressing Kernel Image ... OK
- kernel loaded at 0x01080000, end = 0x021b57d0
- Loading Ramdisk to b3d35000, end b3e9ed17 ... OK
- Loading Device Tree to 000000001fff1000, end 000000001ffff083 ... OK
- fdt_instaboot: no instaboot image
- Ptarting kernel ...
- uboot time: 6468422 us
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.14.29-g9179730-dirty (mly@`zkj) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.⸮JJ⸮⸮5A⸮PREEMPT Thu Sep 21 18:42:57 CST 2017
- [ 0.000000@0] CPU: AArcx64 Processor [410fd034] revision 4
- [ 0.000000@0] no prop version_code
- [ 0.000000@0] bootconsole [earlycon0] enabled
- [ 0.000000@0] fdt Reserved memory table:
- [ 0.000000@0] linux,di: 0x00000000be200000 - 0x00000000c0000000 (30 MiB)
- [ 0.000000@0] DI: DI reserved memory: created CMA me[K⸮pool at 0x00000000be200000, size 30 MiB
- [ 0.000000@0] linux,chunk-reserve: 0x00000000ba200000 - 0x00000000be200000 (64 MiB)
- X 0.000000@0] linux,ion-dev: 0x00000000b6200000 - 0x00000000ba200000 (64 MiB)
- [ 0.000000@0] linux,vdin1_cma: 0x00000000b5000000 - 0x00000000b6000000 (16 MiB)
- [ 0.000000@0] cma: Reserved 16 MiB at b5000000, total cma pages:4096
- [ 0.000000@0] linux,ppmgr: 0x00000000b6200000 - 0x00000000b6200000 (0 MiB)
- [ 0.000000@0] linux,codec_mm_cma: 0x000000009ec00000 - 0x00000000b3c00000 (336 MiB)
- [ 0.000000@0] cma: Reserved 336 MiB at 9ec00000, total cma pages:90112
- [ 0.000000@0] linux,picdec: 0x00000000b6200000 - 0x00000000b6200000 (0 MiB)
- [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
- [ 0.000000@0] linux,codec_mm_reserved: 0x000000009ab00000 - 0x000000009ec00000 (65 MiB)
- [ 0.000000@0] fdt Reserved memory total: 579 MiB
- [ 0.000000@0] cma: Reserved 8 MiB at b4800000, total cma pages:92160
- [ 0.000000@0] psci: Using PSCI v0.1 Function IDs from DT
- X 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0b6160000 s19968 r8192 d20992 u49152
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 768261
- [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=8 vout=576cvbs,enable hdmimode=1080p60hzى͵⸮⸮⸮⸮576cvbs hdmitx= cvbsdrv=0⸮⸮⸮ androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=78:c2:c0:99:52:c0 androidboot.mac=78:c2:c0:99:52:c0 androidboot.slot_suffix=_a androidboot.rpmb_state=1
- [ 0.000000@0] logo: osd1
- [ 0.000000@0] logo: loaded
- [ 0.000000@0] logo: 0x3d800000
- [ 0.000000@0] logo: 576cvbs
- [ 0.000000@0] vout_serve: 576cvbs
- [ 0.000000@0] vout_serve: enable: 1
- [ 0.000000@0] logo: get hdmimode: 1080p60hz
- [ 0.000000@0] logo: get cvbsmode: 576cvbs
- [ 0.000000@0] tv_vout: cvbs performance line = 0
- [ 0.000000@0] [amvecm] pq string error !!!
- [ 0.000000@0] jtag: jtag select 2
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cachd hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000@0] Memory: 2444208K/3140608K available (10933K kernel code, 1237K rwdata, 4192K rodata, 1251K init, 3804K bss, S⸮⸮⸮⸮Z⸮reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8044210000 ( 66 MB)
- [ 0.000000@0] modules : 0xffffffbff`000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB)
- [ 0.000000@0] .init : 0xffffffc001f47000 - 0xffffffc00207fe00 ( 1252 kB)
- [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001f467e4 ( 15130 kB)
- [ 0.000000@0] .data : 0xffffffc002080000 - 0xffffffc0021b57d0 ( 1238 kB)
- [ 0.000000@0] PM: Registered nosave memory'ڵ⸮⸮⸮0x01080000-0x01f45fff]
- [ ⸮r⸮⸮⸮⸮⸮⸮⸮ SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, No|es=1
- [ 0.000000@0] arch_multi_cluster:1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.008250@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994
- [ 0.016848@0] Console: colour dummy device 80x25
- [ 0.021097@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.031671@0] pid_max: default: 32768 minimum: 301
- [ 0.036588@0] Security Framework initialized
- [ 0.040787@0] SELinux: Initializing.
- [ 0.044533@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.051369@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.065375@0] Initializing cgroup subsys debug
- [ 0.065415@0] Initializing cgroup subsys freezer
- [ 0.068936@0] ftrace: allocating 37808 entries in 148 pages
- [ 0.125126@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.125167@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.130751@0] /cpus/cpu@2: Missing clock-frequency property
- [ 0.136380@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.141952@0] /cpus/cpu@000: Missing clock-frequency property
- [ 0.147735@0] /cpus/cpu@001: Missing clock-frequency property
- [ 0.153504@0] /cpus/cpu@002: Missing clock-frequency property
- [ 0.159286@0] /cpus/cpu@003: Missing clock-frequency property
- [ 0.165053@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
- [ 0.215402@0] Meson chip version = RevA (22:A - 82:0)
- [ 0.233782@0] CPU1: Booted secondary processor
- [ 0.253753@2] CPU2: Booted secondary processor
- [ 0.273766@0] CPU3: Booted secondary processor
- [ 0.293797@4] CPU4: Booted secondary processor
- [ 0.313789@4] CPU5: Bo`ted secndary processor
- [ 0.333807@6] CPU6: Booted secondary processor
- [ 0.353835@0] CPU7: Booted secondary processor
- [ 0.353929@0] Br⸮⸮⸮сup 8 CPUs
- [ 0.382751@0] SMP: Total of 8 processors activated.
- [ 0.396819@2] sched: registering cpufreq notifiers for scale-invariant loads
- [ 0.398343@2] instabooting: 0
- [ 0.418451@2] cma: cma_init_reserved_areas, use_cma_first:1
- [ 0.418564@2] pinctrl core: initialized pinctrl subsystem
- [ 0.424589@2] regulator-dummy: no parameters
- [ 0.429110@0] NET: Registered protocol family 16
- [ 0.435313@2] ramoops: using module parameters
- [ 0.437905@2] console [pstore-1] enabled
- [ 0.441225@2] pstore: Registered ramoops as persistent store backend
- [ 0.447638@2] ramoops: attached 0x100000@0x730⸮⸮⸮b*⸮⸮⸮ 0/0
- [ 0.454352@2] cpuidle: using governor menu
- [ 0.457679@0] aml_vdac_init: module init
- [ 0.461532@2] register canvas platform driver
- [ 0.465822@3] register rdma platform driver
- [ 0.472135@3] vdso: 2 pages (1 code, 1 data) at base ffffffc002088000
- [ 0.476460@3] hw-breakpoint: found 6 breakpoint and 4 wachpoint registers.
- [ 0.483803@3] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.490717@0] software IO TLB [mem 0x95400000-0x95800000] (4MB) mapped at [ffffffc095400000-ffffffc0957fffff]
- [ 0.499677@0] Serial: AMBA PL011 UART driver
- [ 0.504640@0] aml_i2c version: 20140813
- [ 0.508080@2] i2c-core: driver [pmu4] using legacy resume method
- [ 0.514110@2] codec_mm:codec_mm_module_init
- [ ⸮0.518163@2] media_configs_system_init
- [ 0.522074@2] aml_watch_point_probe, in
- [ 0.526292@2] meson_mpll_clk: register mpll_clk_out0 success done
- [ 0.531894@2] meson_mpll_clk: register mpll_clk_out1 success done
- [ 0.538002@2] meson_mpll_clk: register mpll_clk_out2 success done
- [ 0.544346@2] clk_sys: register PLL sys_pll success done
- [ 0.549471@2] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0⸮⸮⸮⸮⸮] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.559963@2] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.565528@2] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.571425@2] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.577381@2] gxl_clk: [ f`lk_div3 ] ->clockrate: 666666666Hz
- [ 0.583237@2] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.589105@2] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.594962@2] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.600855@2] gxl_clk: clock initialization complete
- [ 0.605988@2] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk⸮reg2=ffffff800003e764
- [ 0.616503@2] aml_iomap: amlogic iomap probe"⸮⸮⸮5
- [ 0.619093@2] pinmux-gxl ⸮⸮⸮⸮⸮r⸮⸮⸮⸮⸮⸮⸮ Init pinux probe!
- [ 0.625388@2] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.631163@2] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
- [ 0.638742@2] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_txpe+0x0/0xbc)
- [ 0.646989@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
- [ 0.654838@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
- domain-0 init dvfs: 4
- domain-1 init dvfs: 4
- [ 0.675626@3] codec_mm has 2 memory regions
- [ 0.675696@3] codec_mm codec_mm.21: assigned reserved lemory node linux,codec_mm_cma ok
- [ 0.682304@3] codec_mm codec_mm.21: assigned⸮⸮͕⸮ٕ⸮⸮memory node linux,codec_mm_reserved ok
- [ 0.690952@0] codec_mm has 2 memory regions
- [ 0.695004@3] codec_mm codec_mm.21: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.703061@0] codec_mm codec_mm.21: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.714126@3] vpu: driver version: v04
- [ 0.715307@3] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.719952@3] vpu: vpu_probe OK
- [ 0.724776@2] tv_vout: tvout_probe
- ⸮[ 0.726403@2] tv_vout: chrdev devno 266338304 for disp
- [ 0.731575@2] vout_notify: vout_register_server
- [ 0.736108@2] tv_vout: register tv module server ok
- [ 0.741234@3] tv_vout: create cdev tv
- [ 0.744723@0] tv_vout tvout_probe OK
- [ 0.749084@0] canvas_probe reg=00000000c8838000,size=400
- [ 0.753725@0\ canvas maped reg_base =ffffff800009a000
- [ 0.763051@2] rdma_probe
- [ 1.143081@3] bio: create slab <bio-0> at 0
- [ 1.144287@0] SCSI subsystem initialized
- [ 1.146290@0] usbcore: registered new interface driver usbfs
- [ 1.151443@0] usbcore: registered new interface driver hub
- [ 1.057001@3] usbcore: registered new device driver usb
- [ 1.163422@0] i2c-gpio i2c_gpio.42: using pins 17> (SDA) and 173 (SCL)
- [ 1.168941@0] Linux video capture interface: v2.00
- [ 1.173796@0] pps_core: LinuxPPS API ver. 1 registered
- [ 1.178624@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.188624@⸮⸮⸮⸮⸮⸮⸮⸮⸮support registered
- [ 1.193501@0] hdmitx: system: Ver: 2014May6
- ⸮ 1.196511@0] hdmitx: amhdmitx_probe
- [ 1.200324@0] hdmitx: hdmi_init_chip_type: 0
- [ 1.204257@0] hdmitx hpd irq = 89
- [ 1.208246@0] hdmitx20: Mapped PHY: 0xc1100000
- [ 1.211986@0] hdmitx20: Mapped PHY: 0xc8834400
- [ 1.216431@0] hdmitx20: Mapped PHY: 0xd0100000
- [ 1.220899@0] hdmitx20: Mapped PHY: 0xc8100000
- [ 1.225436@0] hdmitx20: Mapped PHY: 0xc883c000
- [ 1.229811@0] hdmitx20: Mapped PHY: ⸮104400
- [ 1.234273@3] hdmitx20: Mapped PHY: 0xc883a000
- [ 1.238741@3] hdmitx20: Mapped PHY: 0xda83a000
- [ 1.243199@0] hdmitx20: Mapped PHY: 0xd0044000
- [ 1.247908@3] avmute set to 1
- [ 1.250748@0] hdmitx: attr default
- [ 1.254458@0] vout_serve: vout_init_module
- [ 1.258317@0] tv_vout: tv_set_current_vmode[925]fps_target_mode=8
- [ 1.264352@0] tv_vout: mode is 8,sync_du⸮ѥ⸮⸮}⸮⸮⸮⸮1,sync_duration_num=50
- [ 1.271118@0] tv_vout: already display in uboot
- [ 1.275668@0] vout_serve: vinfo mode is: 576cvbs
- [ 1.280297@0] vout_serve: init mode 576cvbs
- [ 1.284766@0] vout_serve: create_vout_fops OK
- [ 1.288872@3] vout_serve: create vout attribute OK
- ⸮[ 1.293691@0] vout_sY.W⸮j⸮ͽ⸮}ٽ⸮⸮}⸮ɽ⸮⸮⸮OK
- [ 1.288284@0] logo: logo_ini|
- [ 1.301494@0] osd_rdma: osd_rdma_init: rdma_table p=0xb4841000,op=0xb4841000 , v=0xffffff80000b9000
- [ 1.310184@0] rdma_register, rdma_table_addr ffffff80000c9000 rdma_table_addr_phy b4842000 reg_buf ffffffc09582c000
- [ 1.320651@0] rdma_register success, handle 1 table_size 4096
- X 1.326410@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
- [ 1.332474@0] rdma_register, rdma_table_addr ⸮⸮⸮⸮⸮⸮⸮⸮⸮"⸮000 rdma_table_addr_phy b4843000 reg_buf ffffffc0959a1000
- [ 1.342967@0] rdma_register success, handle 2 table_size 4096
- [ 1.348722@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
- [ 1.354790@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.361254@0] Bluetooth: Core ver 2.18
- X 1.364450@0] NET: Registered protocol family 31
- [ 1.368937@0] Bluetooth: HCI device and connection manager initialized
- [ 1.375519@0] Bluetooth: HCI socket layer initialized
- [ 1.380621@0] Bluetooth: L2CAP socket layer initialized
- [ 1.385858@0] Bluetooth: SCO socket layer initialized
- [ 1.390903@0] NetLabel: Initialihng
- [ 1.394484@0] NdtLabel: domain hash size = 128
- [ 1.399090@0] NetLabel: protocols = UNLABELED CIPSOv4
- C 1.404245@0] NetLabel: unlabeled traffic allowed by default
- [ 1.412546@0] Switched to clocksource arch_sys_counter
- [ 1.457542@0] register gxtv_demod demod driver
- [ 1.457993@0] [amlatvdemod..]aml_atvdemod_init.
- [ 1.461080@0] NET: Registered protocol family 2
- [ 1.466111@0] TCP established hash table entr es: 32768 (order: 6, 262144 bytes)
- [ 1.473252@0] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.480321@0] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.486803@0] TCP: reno registered
- [ 1.489947@0] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.496439@0] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.503119@0] NET: Registered protocol family 1
- [ 1.507634@0] RPC: Registered named UNIX socket transport module.
- [ 1.513494@0] RPC: Registered udp transport module.
- [ 1.518420@0] RPC: Registered tcp transport module.
- [ 1.523295@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.530089@0] pwm: output_co = 16 ; clock_co = 8
- [ 1.534644@0] pwm: npwm= 16
- [ 1.537644@3] pwm: p~`be ok
- [ ⸮r⸮⸮⸮⸮⸮⸮⸮] wifi: power_on_pin_OD = 0;
- [ 1.544122@0] aml_wifi wifi.37: [wifi_dev_probe] no power_on_pin2
- [ 1.550261@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] pwm phandle val=40;pwm-channel1=4;pwm-channel2=12
- [ 1.560369@0] aml_wifi wifi.37: [pwm_double_channel@conf_dt] pwm_config1[0] = 30541
- [ 1.568006@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
- [ 1.575698@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
- [ 1.583422@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
- [ 1.591090@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
- [ 1.598491@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
- [ 1.605798@0] aml_wifi wifi.37: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 1.612821@0] aml_wifi wifi.37: [pwm_double_channel_conf] wifi pwm conf ok
- [ 1.619776@0] aml_wifi wifi.37: [wifi_dev_probe] dhd_static_buf setup
- [ 1.626264@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
- [ 1.633798@0] aml_wifi wifi.37: [wifi_dev_probe] interrupt_pin=241
- [ 1.640028@0] aml_wifi wifi.37: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
- [ 1.647450@0] aml_wifi wifi.37: [wifi_dev_probe] power_on_pin=240
- [ 1.653571@0] aml_wifi wifi.37: [wifi_dev_probe] clock_32k_pin=0
- [ 1.659943@3] aml_wifi wifi.37: [wifi_setup_dt] wifi_setup_dt
- [ 1.665421@0] aml_wifi wifi.37: [wifi_setup_dt] interrupt_pin(241)
- [ 1.671599@3] aml_wifi wifi.37: [wifi_setup_dt] power_on_pin(240)
- [ 1.678104@0] Unpacking initramfs...
- [ 1.740035@0] Freeing initrd memory: 1444K (ffffff,⸮d35000 ⸮ ffffffc0b3e9e000)
- [ ⸮r⸮⸮⸮⸮⸮⸮⸮] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 1.748464@0] Initialise system trusted keyring
- [ 1.752989@0] audit: initializing netlink subsys (disabled)
- [ 1.758608@0] audit: type=2000 audit(1.660:1): initialized
- [ 1.765040@3] HugeTLB registdred 2 MB page size, pre-allocated 0 pages
- [ 1.778265@0] VFS: Disk quotas dquot_6.5.2
- [ ⸮r⸮⸮ª⸮⸮⸮] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.788884@0] NFS: Registering the id_resolver key type
- [ 1.788952@0] Key type id_resolver registered
- [ 1.793108@0] Key type id_legacy registered
- [ 1.797347@0] NTFS driver 2.1.30 [Flags: R/O].
- [ 1.802171@0] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 1.809920@0] fuse init (API version 7.22)
- [ 1.813869@0] msgmni has been set to 5496
- [ 1.818802@3] NET: Registered protocol family 38
- [ 1.821784@3] Key type asymmetric registered
- [ 1.826460@0] Asymmetric key parser 'x509' registered
- [ 1.831563@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 1.838964@0] io scheduler noop registered
- [ 1.842871@0] io scheduler deadline registered
- [ 1.847599@3] io scheduler cfq registered (default)
- [ 1.903236@0] meson-rng c8834000.rng: hwrng registered
- [ 1.907006@0] loop: module loaded
- [ 1.907669@0] zram: Created 1 device(s) ...
- [ 1.911407@0] mtdops: mtd device (mtddev=name/number) must be supplied
- [ 1.919242@0] tun: Universal TUN/TAP device driver, 1.6
- [ 1.922245@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@pualcomm.com>
- [ 2.054080@0] libphy: stmmac: probed
- [ 2.054116@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
- [ 2.058693@0] eth0: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
- [ 2.065129@0] PPP generic driver version 2.4.2
- [ 2.069281@0] PPP BSD Compression module registered
- [ 2.074012@1] PPP Deflate Comprepsion module registered
- [ 2.079227@1] PPP MPPE Compression module registered
- [ 2.084204@0] NET: Registered protocol family 24
- [ 2.089028@0] usbcore: registered new interface driver asix
- [ 2.094681@0] usbcore: registered new interface driver ax88179_178a
- [ 2.100931@1] usbcore: registered new interface driver cdc_ether
- [ 2.106944@0] usbcore: registered new interface driver net1080
- [ 2.112782@0] usbcore: registered new interface driver cdc_subset
- [ 2.118930@0] usbcore: registered new interface driver zaurus
- [ 2.124711@0] usbcore: registered new interface driver cdc_ncm
- [ 2.130740@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.137188@1] ehci-h20ahb: H20AHB-EHCI Host Controller drivdr
- [ 2.143255@0] ohci_hcd: USB 0.1 'Open' Host Controller (OHCI) Driver
- [ 2.149754@1] usbcore: registered newJ⸮ѕə⸮⸮⸮⸮driver cdc_acm
- [ 2.155198@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 2.163575@0] usbcore: registered new interface driver usb-storage
- [ 2.169877@0] usbcore: registered new interface driver usbserial
- [ 2.176551@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff800010e000
- [ 2.186692@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 2.193186@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff800011a080
- [ 2.204612@0] mousedev: PS/2 mouse device common for all mice
- [ 2.210170@0] usbcore: registered new interface driver xpad
- [ 2.215474@0] i2c /dev entries drZW⸮5
- [ 2.219457@0] IR NEC protocol handler initialized
- [ 2.223627@0] IR RC5(x) protocol handler initialized
- [ 2.228569@0] IR RC6 protocol handler initialized
- [ 2.233303@1] IR JVC protocol handler initialized
- [ 2.238019@1] IR Sony protocol handler initialized
- [ 2.242858@1] IR RC5 (streamzap) protocol handler initialized
- [ 2.248606@0] IR SANYO protocol handler initialized
- [ 2.253514@0] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.259777@0] usbcore: registered new interface driver uvcvideo
- [ 2.265507@0] USB Video Class driver (1.1.1)
- [ 2.269915@0] usbcore: registered new interface driver cx231xx
- [ 2.275695@0] cx231xx: Cx231xx dvb Extension initialized
- [ 2.282003@1] device-mapper: ikѱ⸮ 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 2.289857@0] Bluetooth: HCI UART |river ver 2.2
- [ 2.294298@0] Bluetooth: HCI H4 protocol initialized
- ⸮[ 2.299659@0] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
- [ 2.307098@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
- [ 2.310466@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
- [ 2.318368@0] CPUidle arm64: cpuidle ini⸮х⸮х!
- [ 2.323319@0] CPUidle arm64: cpuidle init done!
- [ 2.328279@0] @@@@@@@@@@_____2______in dia_init()
- [ 2.331997@0] ATVR driver - init called!
- [ 2.336068@0] usbcore: registered new interface driver usbhid
- [ 2.341754@0] usbhid: USB HID core driver
- [ 2.346188@0] ashmem: initialized
- [ 2.349221@0] logger: created 256K log 'log_main'
- [ 2.353972@0] logger: created 256K log 'log_events'
- [ 2.358878@0] logger: created 256K log 'log_radio'
- [ 2.363676@0] logger: created 256K log 'log_system'
- [ 2.369617@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff800011c4c0
- [ 2.375667@0] c81004c0.serial: ttyS0 at MMIO 0xc80004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 2.390621@0] meson_ua.⸮1004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 2.393309@0] console [ttyS0] enabled
- [ 2.393309@0] console [ttyS0] enabled
- [ 2.400514@0] bootconsole [earlycon0] disabled
- [ 2.400514@0] bootconsole [earlycon0] disabled
- [ 2.409676@0] me⸮⸮⸮U⸮⸮сc11084c0.serial: ==uart1 reg addr = ffffff800011e4c0
- [ 2.416365@0] c11¢⸮.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 2.426109@0] meson-gpu-clkgen c883c000gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff]
- [ 2.435549@0] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16
- [ 2.443094@0] hdmitx_hdcp_init
- [ 2.446452@0] aml_vrtc rtc.36: rtc core: registered aml_vrtc as rtc0
- [ 2.452238@0] BLASTER Driver Init
- [ 2.455997@0] secmon has 1 memory regions
- [ 2.459404@0] secmon: share in base: 0xffffff800013a000, share out base: 0xffffff800013c⸮⸮j
- [ 2.467612@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 2.474584@0] secmon: probe done
- [ 2.478162@0] storage: storage in base: 0xffffff8001800000
- [ 2.483237@0] storage: storage out base: 0xffffff8001880000
- [ 2.488723@0] storage: storage block base: 0xffffff8001900000
- [ 2.494422@0] storage: probe done!
- [ 2.498381@0] aml_sd_emmc_probe: line 3608
- [ 2.501837@0] mmc driver version: 1.07, 2017-4-26: Support new emmc host controller for version 3
- [ 2.511195@0] aml_sd_emmc_reg_init 1152
- [ 2.514493@0] get property: ocr_avail, value:0x00200080
- [ 2.520942@0] get property: f_min, value:300000
- [ 2.527026@0] get property: f_max, value:50000000
- [ 2.533341@0] get property: max_req_size, value:0x00020000
- [ 2.539810@0] get property: pinname, str:emmc
- [ 2.545571@0] get property: ⸮ card_type, value:1
- [ 2.551272@0] get property: gpio_dat3, str:
- [ 2.556718@0] get property: hw_reset, str:
- [ 2.562153@0] emmc:pdata->caps = c0000d47
- [ 2.566104@0] emmc:pdata->caps2 = 0
- [ 2.569541@0] emmc:pdata->pm_caps = 0
- [ 2.573188@0] storage 1, boot 1
- [ 2.576270@0] get_storage_dev return 1
- [ 2.612570@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success⸮
- [ 2.612800@0] aml_sd_emmc_probe: line 3608
- [ 2.617414@0] aml_sd_emmc_reg_init 1152
- [ 2.620668@0] get property: ocr_avail, value:0x00200080
- [ 2.627098@0] get property: f_min, value:400000
- [ 2.633208@0] get p⸮⸮⸮⸮⸮⸮ f_max, value:100000000
- [ 2.639585@0] get property: max_req_size, value:0x00020000
- [ 2.646060@0] get property: irq_in, value:3
- [ 2.651746@0] get property: irq_out, value:5
- [ 2.657489@0] get property: gpio_cd, str:
- [ 2.662881@0] get property: pinname, str:sd
- [ 2.668494@0] get property: jtag_pin, str:
- [ 2.673951@0] get property: card_type, value:5
- [ 2.679621@0] get property: gpio_dat3, str:
- [ 2.685076@0] sd:pdata->caps = 7
- [ 2.688235@0] sd:pdata->caps2 = 0
- [ 2.691508@0] sd:pdata->pm_caps = 0
- [ 2.702036@0] emmc: try set sd/emmc to DDR mode
- [ 2.702091@0] [aml_sd_emmc_irq] emmc: warning... response crc,vstat:0xa1ff2400,virqc:3fff
- [ 2.709043@0] [aml_host_bus_fsm_show] emmc: err: wait for irq service, bus_fsm:0x8
- [ 2.716391@4] aml_sd_emmc_data_thread 2642 emmc: c[⸮⸮SHh⸮r⸮⸮⸮⸮⸮⸮⸮] [aml_sd_emmc_data_thread] aml_sd_emmc_data_thread() 2658: set 1st retry!
- [ 2.729519@4] [aml_sd_emmc_data_thread] retry cmd 6 the 10-th time(s)
- [ 2.033258@0] [aml_sd_emmc_probe] aml_sd_emmc_probe) success!
- [ 2.733293@0] aml_sd_emmc_probe: line 3608
- [ 2.733907@0] aml_sd_emmc_reg_init 1152
- [ 2.733961@0] get property: ocr_avail, value:0x00200080
- [ 2.733964@0] get property: f_min, value:400000
- [ 2.733966@0] get property: f_max, value:200000000
- [ 2.733969@0] get property: max_req_size, value:0x00020000
- [ 2.733974@0] get property'⸮⸮⸮⸮⸮⸮⸮⸮ str:sdio
- [ 2.733978@0] get property: ⸮ɑ}⸮⸮⸮⸮⸮ value:3
- [ 2.734018@0] sdio:pdata->caps = 7810f
- [ 2.734020@0] sdio:pdata->caps2 = 0
- [ 2.734023@0] sdio:pdata->pm_caps = 1
- [ 2.772563@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.773286@0] ion_dev has 1 memory regions
- [ 2.773320@0] ion_dev_mem_init size=0x4000000
- [ 2.801958@0] ion_chunk_heap_create: base 3122659328 size 67108864 align 0
- [ 2.815593@0] fb: osd_init_module
- [ 2.815729@0] fb: viu vsync irq: 35
- [ 2.815736@0] fb: failed to init reserved memory
- [ 2.815738@0] fb: osd_set_free_scale_mode_hw
- [ 2.815750@0] fb: osd_probe vinfo:ffffffc002136068
- [ 2.815754@0] fb: init fbdev bpp is:32
- [ 2.842167@4] emmc: retry, rx_phase 0 -> 1
- [ 2.842239@6] [aml_is_card_insert] card OUT
- [ 2.842313@0] [aml_is_card_insert] card OUT
- [ 2.8545<1@0] fb: set osd0 reverse as NONE
- [ 2.859223@0] emmc: new DDR MMC card at address 0001
- [ 2.863475@0] emmc: clock 50000000, 8-bit-bus-width
- [ 2.869204@0] mmcblk0> emmc:0001 032G74 29.1 GiB
- [ 2.873384@0] mmcblk0boot0: emmc:0001 032G74 partition 1 4.00 MiB
- [ 2.876308@0] fb: osd probe OK
- [ 2.876855@0] ge2d: ge2d_init_module
- [ 2.876868@0] ge2d: ge2d_dev major:242
- [ 2.877769@0] ge2d: vpu clock is 666660000 HZ
- [ 2.877781@0] ge2d: ge2d clock is 400 MHZ
- [ 2.877791@0] ge2d: ge2d: pdev=ffffffc0959a8600, irq=182, rstc=0xffffffc095bc06c0, clk=ffffffc095998300
- [ 2.877842@0] ge2d: mapped phy: 0xd0160000
- [ 2.877847@0] ge2d: ge2d start monitor
- [ 2.877909@0] ge2d: ge2d workqueue monitor start
- [ 2.878164@0] sysled: module init
- [ 2.878289@0] sysled: led_gpio = 154
- [ 2.878290@0] sysled: active_low = 0
- [ 2.878317@0] sysled: red_led_pin_num = 232
- [ 2.878330@0] sysled: mcu_pin_num = 151
- [ 2.878501@0] sysled: edwin---> add flash_led_timer
- [ 2.878504@0] sysled: Starting timer to fire in 50ms (4294937575)
- [ 2.878508@0] sysled: module probed ok
- [ 2.878965@0\ pwmled: module init
- [ 2.878976@0] edwin---> hbs658_init!!
- [ 2.879055@0] edwin---> hbs658_probe
- [ 2.879091@0] edwin set gpio-sda is ok!! gpio = 230
- [ 2.879101@0] edwin set gpio-scl is ok!! gpio = 231
- [ 2.879270@0] edwin--->count1 = 21, NO ACK!!
- [ 2.879275@0] edwin---> hbs658_write 40H error!!!
- [ 2.879277@0] edwin---> hbs658_probe check led error!!!
- [ 2.879554@0] codec:Amlogic A/V streaming port init
- [ 2.881665@0] codec:get gate dem]⸮control ok ffffffc095be0d40
- [ 2.881670@0] codec:get gate parser_top control k2⸮⸮⸮⸮⸮⸮⸮95be0840
- [ 2.881674@0] codec:get gate vpu_intr control ok ffffffc095be0f00
- [ 2.881680@0] codec:get gate vdec cotrol ok ffffffc095be0200
- [ 2.882585@0] codec:[tsync_pcr_init]init success.
- [ ⸮ 2.882611@0] codec:amvideocap_init_module
- [ 2.882770@0] codec:amvideocap_probe,amvideocap
- [ 2.882773@0] codec:use cma buf.
- [ 2.882774@0] codec:amvideocap_dev_register
- [ 2.883473@0] codec:amvdec_mmpeg4 module init
- [ 2.883834@0] ammvdec_h264 module init
- [ 2.885417@0] amvenc_avc_probe -- reserved memory config fail.
- [ 2.885420@0] amvenc_avc - cma memory pool size: 40 MB
- [ 2.885442@0] encode_wq_init.
- [ 2.885446@0] encode start monitor.
- [ 2.885503@2] encode workqueue monitor start.
- [ 2.885884@0] jpegenc module init
- [ 2.886215@0] codec:picdec_driver_probe called.
- [ 2.886218@0] picdec has 1 memory regions
- [ 2.886252@0] codec:picdec_driver_probe done.
- [ 2.887071@0] codec:vdec_request_irq ffffffc0017a6244, vsync
- [ 2.887294@0] codec:create_ge2d_work_queue video task ok
- [ 3.092415@0] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_ad⸮}⸮⸮⸮b4850000 reg_buf ffffffc0947c0000
- [ 3.092512@0] mmcblk0boot1: emmc:0001 ⸮⸮:⸮4 partition 2 4.00 MiB
- [ 3.092665@0] mmcblk0rpmb: emmc:0001 032G74 partition 3 4.00 MiB
- [ 3.114700@0] rdma_register success, handle 3 table_size 32768
- [ 3.114840@0] mmcblk0: unknown partition table
- [ 3.124929@0] video_rdma:rdma_init video rdma handle = 3.
- [ 3.130212@0] codec:used fix clk for vdec clk source!
- [ 3.130231@0] [mmc_read_partition_tbl] mmc read partition OK!
- [ 3.130232@0] add_emmc_partition
- [ 3.130452@0] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 3.130613@0] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 3.130756@0] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 3.130895@0] Xmmcblk0p04] env ffset 0x000027400000, size 0x000000800000
- [ 3.131025@0] [mmcblk0p05] ⸮ logo offset 0x000028400000, size 0x000002000000
- [ 3.131151@0] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 3.131278@0] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 3.131403@0] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 3.131534@0] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 3.131656@0] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 3.131788@0] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
- [ 3.131918@0] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
- [ 3.132044@0] [mmcblk0p13] data offset 0x0000b7400000, size 0x000690800000
- [ 3.132075@0] card key: card_blk_probe.
- [ 3.132078@0] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
- [ 3.132081@0] emmc key: emmc_key_init:552 ok.
- [ 3.267887@3] amlmmc_dtb_init: regyster dtb chardev
- [ 3.267888@0] codec:register clk_set_sdtting cpu[34]
- [ 3.278002@0] vpu_init
- [ 3.280058@0] vpu_probe
- [ 3.280068@2] calc 284b9321, store 284b9321
- [ 3.283768@2] calc 284b9321, store 284b9321
- [ 3.283770@2] total valid 2
- [ 3.284226@0] amlmmc_dtb_init: register dtb chardev OK
- [ 3.284226@0] Exit aml_emmc_partition_ops OK.
- [ 3.285339@2] mmcblk0boot1: unknown partition table
- [ 3.286334@2] mmcblk0boot0: unknown partition |able
- [ 3.286603@0] clear_emmc_wait_flag
- [ 3.315944@⸮B⸮ٍ⸮⸮⸮reserved memory config fail.
- [ 3.320643@0] HevcEnc - cma memory pool size: 64 MB
- [ 3.325478@0] HevcEnc - wave420l_irq: 219
- [ 3.329462@0] vpu base address get from platform driver physical base addr=0xc8810000, virtual base=0xffffff80003d8000
- [ 3.340355@2] success to probe vpu device with video memory from cma
- [ 3.346717@2] DI: di_module_init ok.
- [ 3.349883@2] DI: di_module_init> major 234
- [ 3.354319@2] DI: di_probe
- [ 3.356833@0] deinterlace has 1 memory regions
- [ 3.361140@0] deinterlace deinterlace.28: assigned reserved memory node linux,di ok
- [ 3.368699@0] DI-di_probe: get flag_cma error.
- [ 3.373111@0] di_irq:78,timerc_irq:38
- [ 3.376980@0] rdma_register, rdma_table_addr ffffff800019b000 rdma_table_addr_phy b484a000 reg_buf ffffffc094054000
- [ 3.387082@0] rdma_register success, handle 4 table_size 8192
- [ 3.392752@0] DI: di_probe allocate rdma channel 4.
- [ ⸮3.397577@0] DI: DI hw version 2.
- [ 3.400948@0] 0x000000db:Y=db,U=0V=0
- [ 3.40<572@0] 0x000000dc:Y=dc,U=0⸮V=0
- [ 3.408183@0] 0x000000dd:Y=dd,U=0⸮V=0
- [ 3.411805@0] 0x000000de:Y=de,U=0V=0
- [ 3.415<52@0] 0x000000df:Y=df,U=0V=0
- [ 3.419050@0] 0x000000e0:Y=e0,U=0V=0
- [ 3.422680@0] 0x000000e1:Y=e1,U=0,V=0
- [ 3.426296@0] 0x000000e2:Y=e2,U=0⸮V=0
- [ 3.429918@0] 0x000000e3:Y=e3,U=0,V=0
- [ 3.4335<8@0] 0x000000f0:Y=f0,U=0V=0
- [ 3.437166@0] 0x000000f1:Y=f1,U=0⸮V=0
- [ 3.440785@0] 0x000000f2:Y=f2,U=0⸮V=0
- [ 3.444460@0] 0x000000f3:Y=f3,U=0V=0
- [ 3.448034@0] 0x000000f4:Y=f4,U=0V=0
- [ 3.451653@0] 0x000000f5:Y=f5,U=0V=0
- [ 3.455282@0] 0x000000f6:Y=f6,U=0⸮V=0
- [ 3.458902@0] 0x000000f7:Y=f7,U=0V=0
- [ 3.462520@0] 0x000000f8:Y=f8,U=0V=0
- [ 3.466151@0] 0x000000f9:Y=f9,U=0V=0
- [ 3.469766@0] 0x000000fa:Y=fa,U=0,V=0
- [ 3.473417@0] 0x000000fb:Y=fb,U=0⸮V=0
- [ 3.477014@0] 0x000000fc:Y=fc,U=0,V=0
- [ 3.480636@0] 0x000000fd:Y=fd,U=0V=j
- [ 3.484285@0] 0x000000fe:Y=fe,U=0V=0
- [ 3.487881@0] 0x000000ff:Y=ff,U=0V=0
- [ 3.481501@0] DI: support multi decoding 253~254~255.
- [ 3.497512@0] efusekeynum: 4
- [ 3.499374@0] efusekeyname: mac offset: 0 size: 6
- [ 3.505867@0] efusekeyname: mac_bt offset: 6 size: 6
- [ 3.512119@0] efusekeyname: mac_wifi offset: 12 size: 6
- [ 3.518590@0] efusekeyname: usid offset: 18 size: 16
- [ 3.525490@0] efuse efuse.10: probe OK!
- [ 3.529087@2] key unify config unifykey-num is 14
- [ 3.533441@2] key unify fact unifykey-num is 14
- [ 3.537821@2] aml_unifykeys_probe:1280=============unifykey_devno:e800000
- [ 3.544925@0] 6unifykey: device unifykeys `reated ok
- [ 3.549691@2] 6aml_unifykeys_init done!
- [ 3.553522@2] PPMGRDRV: warn: ppmgr module init func called
- [ 3.559125@2] PPMGRDRV: err: ppmgr_driver_probe called
- [ 3.564048@2] ppmgr has 1 memory regions
- [ 3.567958@2] PPMGRDRV: info: ppmgr_dev major:231
- [ 3.572942@0] PPMGRDRV: info: ppmgr_probe done
- [ 3.577488@2] amlogic rfkill init
- [ 3.580380@2] enter bt_probe of_node
- [ 3.583890@2] not get gpio_en
- [ 3.586723@2] power on valid level is high
- [ 3.590603@2] bt: power_on_pin_OD = 0;
- [ 3.594952@0] Bluetooth: BlueSleep Mode Driver Ver 1.2
- [ 3.600226@0] ionvideo-000: V4L2 device registered as video13
- [ 3.605534@2] ionvideo-001: V4L2 device registered as video14
- [ 3.611087@2] ionvideo-002: V4L2 device registered as video15
- [ 3.616863@0] ionvideo-003: V4L2 device registered as video16
- [ 3.622479@0] ionvideo-004: V4L2 device registered as video17
- [ 3.628224@2] ionvideo-005: V4L2 device registered as video18
- [ 3.634082@2] ionvideo-006: V4L2 device reVkѕɕ⸮⸮as video19
- [ 3.639576@0] ionvideo-007: V4L2 device registered as video20
- [ 3.645348@2] ionvideo-008: V4L2 device registered as video21
- [ 3.650806@2] ionvid: hnfo: Video Technology Magazine Ion Video
- [ 3.656680@2] ionvid: info: Capture Board ver 1.0 successfully loaded
- [ 3.663155@2] audio_dsp: [dsp]register dsp to char divece(257)
- [ 3.669651@2] amaudio: amaudio: driver amaudio succuess!
- [ 3.674483@2] amlvid:info: amlvideo_init called
- [ 3.678409@2] amlvid:info: amlvideo_create_instance called
- [ 3.684112@2] amlvid:info: v4l2_dev.name=:amlvideo-000
- [ 3.689368@0] amlvideo-000: V4L2 device registered as⸮⸮⸮⸮⸮⸮0
- [ 3.695280@2] vdin_drv_init: major 230
- [ 3.698899@0] rdma_register, rdma_table@`ddr ffffff800019e000 rdma_table_addr_phy b484c000 reg_buf ffffffc09474fc00
- [ 0.708908@0] rdma_register success, handle 5 table_size 512
- [ 3.714615@0] vdin_drv_probe:vdin.0 rdma hanld 5.
- [ ⸮3.719379@0]
- [ 3.719379@0] vdin memory resource undefined!!
- [ 3.725271@0] vdin0 cma_mem_size = 16 MB
- [ 3.729122@0] vdin0 irq: 115 rdma irq: 2
- [ 3.733064@0] vdin_drv_probe: fclk_div5 is 400 MHZ
- [ 3.737765@0] vdin_drv_probe: vdin[0] clock is 50 MHZ
- [ 3.743207@0] vdin_drv_probe: driver initialized ok
- [ 3.747708@0] rdma_register, rdma_table_addr ffffff80001a9000 rdma_table_addr_phy b484d000 reg_buf ffffffc095a50600
- [ 3.757967@0] rdma_register success, handle 6 table_size 512
- [ 3.763555@0] vdin_drv_probe:vdin.1 rdma hanld 6.
- [ 3.768414@0] vdin1 has 1 memory regions
- [ 3.772112@0] vdin vdin1.30: assigned reserved memory node linux,vdin1_cma ok
- [ 3.779238@0]
- [ 3.779238@0] vdin memory resource done.
- [ 3.784765@0] vdin1 cma_mem_size = 16 MB
- [ 3.788635@0] vdin1 irq: 117 rdma irq: 4
- [ 3.792560@0] vdin_drv_probe: fclk_div5 is 400 MHZ
- [ 3.797304@0] vdin_drv_probe: vdin[1] clock is 50 MHZ
- [ 3.802515@0] vdin_drv_probe: driver initialized ok
- [ 3.807325@0] vdin_drv_init: vdin driver init done
- [ 3.811839@0] tvafe_drv_init: major 229
- [ 3.816063@0] tvafe: tvafe_init.
- [ 3.819184@0] vbi: vbi_init.
- [ 3.822210@0] [RX]-hdmirx: hdmirx_init.
- [ 3.825490@0] ESM HLD: Initializing...
- [ 3.829170@0] ESM HLD: Registering device range 'esm_rx'...
- [ 3.834750@0] ESM HLD: Device range 'esm_rx' has been registered.
- [ 3.840815@0] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 3.846801@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 3.853356@0] ESM HLD: Creating device 'esm_rx'...
- [ 3.858264@0] ESM HLD: Device 'esm_rx' has been creatdd.
- [ 3.863354@0] ESM HLD: Done initializing the HLD driver.
- [ 3.868587@0] `mvdec_656in module: init.
- [ 3.872468@0] amvdec_656in_init_module. 1 hardware detected!.
- [ 3.878181@0] amvdec_656in_init_module:major 226
- [ 3.883044@0] amvdec_656in_probe:start probe .
- [ 3.887135@0⸮ amvdec_656in_probe: bt656 devp->index =0
- [ 3.892251@0] amvdec_656in_probe: bt656[0] clock is 333 MHZ
- [ 3.898027@0] amvdec_656in_probe:bt656[0]start get iore[X⸮.
- [ 3.903511@0] amvdec_656in_probe: bt656[0] maped reg_base =ffffff80001ac000, size=7c
- [ 3.911109@0] amvdec_656in_probe: tvin_frontend_init done :0
- [ 3.916746@0] `mvdec_656in probe ok.
- [ 3.920270@0] amvdec_656in_probe:start probe .
- [ 3.924670@0] amvdec_656in_probe: bt656 devp->index =1
- [ 3.929768@0] amvdec_656in_probe: bt656[1] clock is 333 MHZ
- [ 3.935455@0 amvdec_656in_probe:bt656[1]start get ioremap .
- [ 3.940963@0] amvdec_656in_probe: bt656[1⸮ maped reg_base =ffffff80001ae000, size=7c
- [ 3.948652@0] amvdec_656in_probe: tvin_frontend⸮init done :1
- [ 3.954281@0] amvdec_656in probe ok.
- [ 3.957980@0] amvdec_656in_init_module: bt656 driver init done
- [ 3.963566@0] [viuin..]viuin_init_module viuin module init
- [ 3.969501@0] [viuin..]viuin_probe probe ok.
- [ 3.973346@0\ aml_vecm_init:module init
- [ 3977245@0]
- [ 3.977245@0] VECM probe start
- [ 3.982068@0] Can't find wb_sel.
- [ 3.985073@0] dolby_vision_init_receiver(dvel)
- [ 3.989427@0] dolby_vision_init_receiver: dvel
- [ 3.994012@0] aml_vecm_probe: ok
- [ 3.997837@0] saradc c1108680.saradc: initialized by BL30
- [ 4.002372@0] saradc c1108680.saradc: calibration start:
- [ 4.007711@0] saradc c1108680.saradc: nominal=0, value=5
- [ 4.012966@0] saradc c1108680.saradc: nominal=256, value=231
- [ 4.018533@0] saradc c1108680.saradc: nominal=512, value=461
- [ 4.024158@0] saradc c1108680.saradc: nominal=768, value=690
- [ 4.029744@0] saradc c1108680.saradc: nominal=1023, value=920
- [ 4.035421@0] saradc c1108680.saradc: calibration end: coef=4568
- [ 4.041643@0] remote: Driver init
- [ 4.044770@0] remote: platform_data g_remote_ao_offset=580
- [ 4.050057@0] remote: platform_data irq =228
- [ 4.054318@0] remote: set drvdata completed
- [ 4.058522@0] remote: device_create_file completed
- [ 4.063761@⸮J⸮⸮⸮⸮⸮ aml_keypad as /devices/meson-remote.12/input/input0
- [ 4.070371@0] rem⸮⸮⸮ input_register_device completed
- [ 4.075345@0] remote: set_remote_mode[78\
- [ 4.079233@0] remote: remote config major:224
- [ 4.083890@0] remote: physical address:0x94654000
- [ 4.088986@0] gpio-key gpio_keypad.52: gpio_key: 0 name(power) pin()
- [ 4.094605@0] gpio-key gpio_keypad.52: amlogic_gpio_name_map_num pin 0!::
- [ 4.101383@0] gpio-key gpio_keypad.52: gpio_key: 0 power(147)
- [ 4.107025@0] gpio-key gpio_keypad.52: start setup_timer
- [ 4.112245@0] gpio-key gpio_keypad.52: power key(116) registed.
- [ 4.118439@0] inpu⸮:⸮⸮⸮}⸮⸮⸮⸮⸮⸮⸮as /devices/gpio_keypad.52/input/input1
- [ 4.124950@0] gpio-key gpio_keypad.52: gpio keypad register input device completed.
- [ 4.132346@0] input input1: gpio keypad major:223
- [ 4.138399@0] Sensor: lsm303d_init
- [ 4.140592@0] Sensor: stk8313_init
- [ 4.143905@0] Sensor: stk831x_init
- [ 4.147186@0] Sensor: mxc622x_acc_init
- [ 4.150881@0] Sensor: mxc6255xc_acc_init
- [ 4.154883@0] Sensor: l3gd20_gyr_init
- [ 4.159409@0] aml dvb init
- [ 4.161479@0] Amlogic Demod DVB-T/C DebugIF Init
- [ 4.165869@0] Amlogic Demod DVB-T/C DebugIF Init ok----------------
- [ 4.173910@2] jtag: module init
- [ 4.175072@2] jtag: pinctrl setup apao
- [ 4.178571@2] jtag: set state 2
- efuse_pw_en: 0x3
- WARNING! efusd bits is disabled
- Enable A53 JTAG cluster 0 to AO
- [ 4.194773@0] jtag: moduld probed ok
- [ 4.195562@0] defendkey c8834500.defendkey: defendkey_devno:da00000
- [ 4.199192@2] defendkey c8834500.defendkey: defendkey: device defendkey created ok
- [ 4.202578@0] input input1: key 116 up
- [ 4.210445@0] defendkey: driver init
- [ 4.214591@0] input: cec_input as /devices/virtual/input/input2
- [ 4.219811@0] cectx aocec: no hdmirx reg resource
- [ 4.224338@0] cectx aocec: no hhi reg resource
- [ 4.228613@0] cec: wake up flag:0
- [ 4.233924@2] aml_aes_dma c883e000.aml_aes: Aml AES_dma
- [ 4.237697@0] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma
- [ 4.243263@0] aml_sha_dma c883e000.aml_sha: Aml **⸮/SHA224/SHA256 dma
- [ 4.249650@0] usbcore: registered new interface driver snd-usb-audio
- [ 4.257059@2] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 4.264542@2\ aml-i2s-dai I2S.44: I2S Mic is in platform!
- [ 4.267680@2] aml_pcm_dai: pcm mode detection =1
- [ 4.272309@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
- [ 4.279041@0] aml_spdif_dai: set normal 512 fs /4 fs
- [ 4.283949@0] aml_spdif_dai: set 958 audio clk div 4
- [ 4.288811@0] aml_audio_hw: IEC958 16bit
- [ 4.292708@0] hdmitx: audio: aout noW⸮⸮rate 48000
- [ 4.297516@0] hdmitx: audio: aout notify size 16
- [ 4.302087⸮] hdmitx: audio: aout notify format CT_PCM
- [ 4.308276@0] aml_snd_card: aml_multi_dev_parse_of ...
- [ 4.312269@0] aml_snd_card: no multi dev!
- [ 4.522796@0] aml_snd_card: headphone detection disable=1
- [ 4.522833@0] aml_snd_card: no spk event delay time seWHh⸮r⸮⸮ª⸮⸮⸮] aml_pnd_m8_card aml_m8_snd.51: T9015-audio-hifi <-> I2S.44 mapping ok
- [ 4.536113@0] aml_snd_m8_card aml_m8_snd.51: dit-hifi <-> SPDIF.45 mapping ok
- [ 4.542519@0] aml_pcm: enter aml_pcm_new dai->name: PCM.46 dai->id: 0
- [ 4.549011@0] aml_snd_m8_card aml_m8_snd.51: pcm2bt-pcm <-> PCM.46 mapping ok
- [ 4.555913@0] aml_snd_m8_card aml_m8_snd.51: ASoC: no source widget found for LOUTL
- [ 4.563467@0] aml_snd_m8_card aml_m8_snd.51: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 4.572243@0] aml_snd_m8_card aml_m8_snd.51: ASoC: no source widget found for LOUTR
- [ 4.579846@0] aml_snd_m8_card aml_m8_snd.51: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 4.591169@0] GACT probability NOT on
- [ 4.592260@0] Mirror/redirect action on
- [ 4.596098@0] u32 classifier
- [ 4.598960@0] Actions configured
- [ 4.602430@0] Netfilter messages via NETLINK v0.30.
- [ 4.607344@0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 4.613978@0] ctnetlink v0.93: registering with nfnetlink.
- [ 4.619524@0] xt_time: kernel timezone is -0000
- [ 4.623518@0] ipip: IPv4 over IPv4 tunneling driver
- [ 4.629816@0] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.633877@0] arp_tables: (C) 2002 David S. Miller
- [ 4.639341@0] TCP: cubic registered
- [ 4.641843@0] Initializing XFRM netlink socket
- [ 4.64720L⸮] NET: Re`istered protocol family 10
- [ 4.651929@0] mip6: Mobile IPv6
- [ 4.654042@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.662009@0] sit: IPv6 over IPv4 tunneling driver
- [ 4.665625@0] NET: Registered protocol family 17
- [ 4.668794@0] NET: Registered protocol family 15
- [ 4.675797@0] Bridge firewalling registered
- [ 4.677654@0] Bluetooth: RFCOMM TTY layer initialized
- [ 4.682492@0] Bluetooth: RFCOMM socket layer initialized
- [ 4.687793@0] Bluetooth: RFCOMM ver 1.11
- [ 4.691615@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.697162@0] Bluetooth: BNEP filters: protocol multicast
- [ 4.702406@0] Bluetooth: BNEP socket layer initialized
- [ 4.707490@0] Bluetooth: HIDP (Human Interface Dmulation) ver 1.2
- [ 4.713553@0] Bluetooth: HIDP socket layer initialized
- [ 4.718706@0] l2tp_core: L2TP core driver, V2.0
- [ 4.723112@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 4.728007@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 4.733735@0] l2tp_netlink: L2TP netlink interface
- [ 4.738513@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 4.744541@0] l2tp_debugfs: L2TP debugfs support
- [ 4.749051@0] l2tp_ip6: L2TP IP encapsul`tion support for IPv6 (L2TPv3)
- [ 4.755664@0] NET: Registered protocol family 34
- [ 4.760286@0] Key type dns_resolver registered
- [ 4.766519@0] Registering SWP/SWPB emulation handler
- [ 4.770316@0] Loading compiled-in X.509 certificates
- [ 4.774577@0] regulator-dummy: disabling
- 4.778942@0] aml_vrtc rtc.36: setting system clock to 2015-01-01 00:00:11 UTC (1420070411)
- [ 4.789007@0] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
- [ 4.792442@0] gxbb_pm: enter meson_pm_probe!
- [ 4.796574@0] gxbb_pm: meson_pm_probe done
- [ 4.801476@0] cpucore_cooling_register, max_cpu_core_num:4
- [ 4.806251@0] cpucore_cooling_regipter, max_cpu_core_num:4
- [ 4.826955@0] aml_istbt_dev_ready NULL
- [ 4.8270⸮[ 4.831709@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 4.835287@0] Freeing unused kernel memory: 1248K (ffffffc001f47000 - ffffffc00207f000)
- [ 4.862827@0] init: init first stage started!
- [ ⸮r⸮⸮⸮ʚ⸮⸮] audit: type=1403 audit(1420070411.720:2): policy loaded auid=4294967295 ses=4294967295
- [ 5.012228@0] init: (Initializing SELinux non-enforcing took 0.15s.)
- [ 5.022193@0] init: init second stage started!
- [ 5.029804@0] init: Running restorecon...
- [ 5.122814@0] init: waitpid failed: No child processes
- [ 5.123198@0] init: (Loading properties from /default.prop took 0.00s.)
- [ 5.131542@0] init: (Parsing /init.environ.rc took 0.00s.)
- [ 5.134879@0] init: (Parsing /init.usb.rc took 0.00s.)
- [ 5.140202@0] init: /init.amlogic.rc: 245: chmod requires 2 arguments
- [ 5.147277@0] init: (Parsing init.allogic.usb.rc took 0.00s.)
- [ 5.151928@0] init: (Parsing init.amlogic.usb.rc took 0.00s.)
- [ 5.157211@0] init: (Parsing init.amlogic.board.rc took 0.01s.)
- [ 5.163227@0] init: (Parsing init.amlogic.wifi.rc took 0.00s.)
- [ 5.168855@0] init: could not import file 'init.mtk.rc' from '/init.amlogic.rc': No such file or directory
- [ 5.178407@0] init: (Parsing /init.amlogic.rc took 0.04s.)
- [ 5.184575@0] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 5.189825@0] init: (Parsing /init.zygote64_32.rc took 0.00s.)
- [ 5.195509@0] init: (Parsing /init.rc took 0.07s.)
- [ 5.273067@0] init: Starting service 'ueventd'...
- [ 5.273881@0] init: insmod: open("/boot/optee.ko") failed: No such file or directory[ 5.275851@0] ueventd: ueventd started!
- [ 5.283569@0] init: insmod: open("/boot⸮optee_armtz.ko") failed: No such file or directoryueventd: Coldboot took 0.88s.
- [ 6.171197@6] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 6.210526@6] fb: afbc: 1
- [ 6.211400@6] init: enter do_confirm_formated /dev/block/tee, /tee
- [ 6.213731@6] init: blocksize 1024, bytes_per_inode 1024
- [ 6.218928@6] init: do_confirm_formated ext4 try mount
- [ 6.230509@0] EXT4-fs (mmcblk0p8): recovery complete
- [ 6.230687@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 6.310012@0] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.312939@0] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
- [ 6.321366@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
- [ 6.526066@4] EXT4-fs (mmcblk0p13): recovery complete
- [ 6.526271@4] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 6.536451@2] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0: Success
- [ 6.591019@4] fs_mgr: check_fs(): unmount(/data) succeeded
- [ 6.592730@4] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
- [ 6.61179L⸮] random: e2fsck urandom read with 66 bits of entropy available
- [ 7.251419@4] e2fsck: e2fsck 1.42.9 (28-Dec-2013)C⸮+⸮r⸮⸮⸮⸮⸮⸮⸮]
- [ 7.252173@4] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 0.252173@4]
- [ 7.259793@4] e2fsck: Pass 2: Checking directory structure
- [ 7.259793@4]
- [ 7.266812@4] e2fsck: Pass 3: Checking directory connectivity
- [ 7.266812@4]
- [ 7.274151@4] e2fsck: Pass 4: Checking reference counts
- [ 7.274151@4]
- [ 7.280946@4] e2fsck: Pass 5: Checking group summary information
- [ 7.280946@4]
- [ 7.288546@4] e2fsck: /dev/block/data: 1914/1721760 files (10.7% non-contiguous), 327553/6883072 blocks
- [ 7.288546@4]
- [ 7.300692@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
- [ ⸮r⸮⸮ʚ⸮⸮⸮] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
- [ 7.317938@0] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
- [ ⸮ 7.328962@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
- [ 7.339100@0] EXT4-fs (mmcblk0p3): recovery complete
- [ 7.339306@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 7.349273@0] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0: Success
- [ 7.405092@0] fs_mgr: check_fs(): unmount(/cache) succeeded
- [ 7.405164@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
- [ 7.457739@4] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 7.457739@4]
- [ 7.458482@4] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 7.458482@4]
- [ 7.466073@4] e2fsck: Pass 2: Checking directory structure
- [ 7.466073@4]
- [ 7.473150@4] e2fsck: Pass⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮directory connectivity
- [ 7.473150@4]
- [ 7.480450@4] e2fsck: Pass 4: Checking reference counts
- [ 7.480450@4]
- [ 7.487283@4] e2fsck: Pass 5: Checking group summary information
- [ 7.487283@4]
- [ 7.494915@0] e2fsck: /dev/block/cache: 15/32768 files (0.0% non-contiguous), 4211⸮131072 blocks
- [ 7.494915@0]
- [ 7.506286@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
- [ 7.514032@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
- [ 7.523421@0] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
- [ ⸮r⸮⸮⸮⸮ʢ⸮] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option
- [ 7.541275@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 7.548206@0] fs_mgr: check_fs(): mount(/dev/block/tee,/tee,ext4)=0: Success
- [ 7.594605@0] fs_mgr: check_fs(): unmount(/tee) succeeded
- [ 7.594681@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/tee
- [ 7.625461@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 7.625461@0]
- [ 7.626196@0] e2fsck> Pass 1: Checking inodes, blocks, and sizes
- [ 7.626196@0]
- [ 7.633813@0] e2fsck: Pass 2: Checking directory structure
- [ 7.633813@0]
- [ 7.640838@0] e2fsck: Pass 3: Checking directory connectivity
- [ 7.640838@0]
- [ 7.648179@0] e2fsck: Pass 4: Checking reference counts
- [ 7.648179@0]
- [ 7.655000@0] e2fsck: Pass 5: Checking group summary information
- [ 7.655000@0]
- [ 0.662582@0] e2fsck: /dev/block/tee: 11/8192 files (0.0% non-contiguous), 3112/8192 blocks
- [ 7.662582@0]
- [ 7.673579@0] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option
- [ 7.681111@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
- [ 7.690703@0] fs_mgr: __mount(source=/dev/block/tee,targetO⸮⸮⸮⸮type=ext4)=0
- [ 7.757043@0] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
- [ 7.787672@0] logd.auditd: start
- [ 7.087819@0] logd.klogd: 7695259585
- [ 8.248942@2] init: cannot find '/system/bin/tee-supplicant' (No such file or directory), disabling 'tee_supplicant'
- [ 8.257677@2] init: property_set("ro.adb.secure", "1") failed
- [ 8.259841@2] init: /recovery not specified in fstab
- [ 8.329102@0] type=1400 audit(1420070415.040:3): avc: denied { module_request } for pid=4023 comm="debuggerd" kmod="personality-8" scontext=u:r:debuggerd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 8.466781@0] dig: dig start!
- [ 8.492670@0] random: nonblocking pool is initialized
- [ 8.520472@0] init: decode_uid: Unable to find UID for 'pppoe'. Returning UINTMAX
- [ 8.520869@0] init: decode_uid: Unable to find UID for 'pppoe'. Returning UINT_MAX
- [ 8.719673@4] mali_kbase: unknown parameter 'mali_debug_level' ignored
- [ 8.720572@4] mali_kbase: unknown parameter 'mali_shared_mem_size' ignored
- [ 8.730862@4] ftrace: Allocated trace_printk buffers
- [ 8.773467@0] mali d00c0000.t82x: Continuing without Mali regulator control
- [ 8.774859@0] mali d00c0000.t82x: set min pp to default 1
- 8.780137@0] mali d00c0000.t82x: set min clk default to 0
- [ 8.785675@0] mali d00c0000.t82x: dvfs table is 5
- [ 8.790229@0] mali d00c0000.t82x: dvfs table addr ffffffc0929a6018, ele size=48
- [ 8.797488@0] mali d00c0000.t82x: max clk set 3
- [ 8.801959@0] mali d00c0000.t82x: turbo clk set to 4
- [ 8.806884@0] mali d00c0000.t82x: default clh set to 1
- [ 8.812055@0] mali_plat=ffffffbffc04b338
- [ 8.816441@0] gpu cooling register okay with err=0
- [ 8.820773@0] gpu core cooling register okay with err=0
- [ 8.826006@0] gpu_power_main, 63
- [ 8.829253@0] hrtimer: interrupt took 15917 ns
- [ 8.833511@0] mali d00c0000.t82x:⸮GPU identified as 0x0820 r1p0 status 0
- [ 8.841091@0] mali d00c0000.t82x: Probed as mali0
- [ 8.845259@0] init: insmod: open("/system/lib/dovi.ko") failed: No such file or directoryinit: insmod: open("/sys
- [ 8.894040@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 8.896499@0] binder: 4076:4076⸮Ʌ⸮ͅ⸮ѥ⸮⸮⸮failed 29189, size 0-0
- [ 8.897623@0] logd.daemon: reinit
- [ 8.899082@6] type=1400 audit(1420070415.610:4): avc: denied { getattr } for pid=4078 comm="systemcontrol" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:system_control:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 8.913852@6] type=1400 audit(1420070415.630:5): avc: denied { getattr } for pid=4079 comm="hdmi_cec" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:hdmi_cec:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 8.937730@0] ddr_window,module_VER_:2017-03-18-11-13
- [ 8.944707@0] binder: 4079:4079 transaction failed 29189, size 0-0
- [ 8.954715@0] amlkey_init() enter!
- [ 8.958431@0] emmc_key_read:428, read ok
- [ 8.958436@0] amlkey_init() storagekey_info.buffer=ffffff8001900000, storagekey_info.size = 40000!
- [ 8.959661@0] vfm_map_store:rm default
- [ 8.959690@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 8.988560@0] binder: 4078:4078 transaction failed 29189, size 0-0
- q9377:/ # [ 9.192758@2] fb: osd_open index=0,open_count=1
- [ 9.192792@2] fb: use ion buffer for fb memory
- [ 9.196094@2] fb: OSD0 as afbcd mode
- [ 9.199813@2] meson-fb meson-fb.18: create ion_client ffffffc093f26d80, handle=ffffffc0947ad3c0
- [ 9.208243@2] meson-f,j⸮ͽ⸮⸮fb.18: ion memory(0): created fb at 0x00000000b6200000, size 8 MiB
- [ 9.216858@2] fb: 0, phy: 0x00000000b6200000, vir:0xffffff80073ff000, size=8300K
- [ 9.216858@2]
- [ 9.226159@2] meson-fb meson-fb.18: create ion_client ffffffc093f26d80, handle=ffffffc093f54840
- [ 9.234543@2] meson-fb meson-fb.18: ion memory(0): created fb at 0x00000000b6a1b000, size 8 MiB
- [ 9.243174@2] fb: 0, phy: 0x00000000b6a1b000, vir:0xffffff8007c1b000, size=8300K
- [ 9.243174@2]
- [ 9.252435@2] meson-fb meson-fb.18: create ion_client ffffffc093f26d80, handle=ffffffc0934975c0
- [ 9.260846@2] meson-fb meson-fb.18: ion memory(0): created fb at⸮⸮⸮0000000b7236000, size 8 MiB
- [ 9.269478@2] fb: 0, phy: 0x00000000b7236000, WK⸮0xffffff8008437000, size=8300K
- [ 9.26948@2]
- [ 9.278526@2] fb: Frame buffer memory assigned at
- [ 9.283006@2] fb: 0, phy: 0x00000000b6200000, vir:0xffffff80073ff000, size=8300K
- [ 9.283006@2]
- [ 9.292229@2] fb: 0, phy: 0x00000000b6200000, vir:0xffffff80073ff000, size=8300K
- [ 9.292229@2]
- [ 9.301292@2] fb: 0, phy: 0x00000000b6a1b000, vir:0xffffff8007c1b000, size=8300K
- [ 9.301292@2]
- [ 9.310349@2] fb: 0, phy: 0x00000000b7236000, vir:0xffffff8008437000, size=8300K
- [ 9.310349@2]
- [ 9.319406@2] fb: ---------------clear2⸮⸮ memory ffffff80073ff000
- [ 9.327188@2] fb: ---------------clear fb0 memory ⸮⸮⸮⸮⸮⸮⸮⸮⸮b000
- [ 9.333415@2] fb: ---------------clear fb0 memory ffffff8008437000
- [ 9.339408@2] fb: osd[0] canvas.idx =0x40
- [ 9.341738@2] fb: osd[0] canvas.addr=0xb6200000
- [ 9.346239@2] fb: osd[0] canvas.width=7680
- [ 9.350277@2] fb: osd[0] canvas.height=3240
- [ 9.354422@2] fb: osd[0⸮ frame.width=1920
- [ 9.358382@2] fb: osd[0] frame.height=1080
- [ 9.400303@2] fb: osd_open index=1,open_count=1
- [ 9.400335@2] fb: use ion buffer for fb memory
- [ 9.403735@2] meson-fb meson-fb.18: create ion_client fffff⸮⸮93f26d80, handle=ffffffc0947adc80
- [ 9.412232@2] meson-fb meson-fb.18: ion memory(1): cre`ted fb at 0x00000000b7a51000, size 1 MiB
- [ 9.420866@2] fb: Frame buffer memory assigned at
- [ 9.425347@2] fb: 1, phy: 0x00000000b7a51000, vir:0xffffff8008c53000, size=1024K
- [ 9.425347@2]
- [ 9.434588@2] fb: fb1 open, logo index:1
- [ 9.687954@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 9.688006@0] xk⸮⸮hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 9.6973⸮] xhci-h`d xhci-hcd.0.auto: irq 62, io mem 0xc9000000
- [ 9.702829@0] hub 1-0:1.0: USB hub found
- [ 9.705690@0] hub 1-0:10: 3 ports detected
- [ 9.710019@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 9.715446@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 9.724035@0] hub 2-0:1.0: USB hub found
- [ 9.727075@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 9.735657@0] file system registeredC⸮+⸮r⸮⸮ʊ⸮⸮⸮] init: property 'sys.usb.state' doesn't exist while expanding '${sys.usb.statY_RHh⸮r⸮⸮⸮⸮⸮⸮⸮] init: setprop: cannot expand '${sys.usb.state}'
- [ 9.752000@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
- [ 9.760194@0] init: write: cannot expand '${ro.serialno}'
- [ 9.765654@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
- [ 9.775142@0] init: write: cannot expand '${ro.usb.vendor.string}'
- [ 9.781283@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
- [ 9.791094@0] init: write: cann⸮*⸮⸮⸮⸮⸮⸮'${ro.usb.product.string}'
- [ 9.797338@0] init: property_set("ro.radio.noril", "tr]Y⸮ 2⸮⸮⸮⸮⸮5
- [ 9.804209@0] fb: afbc: 1
- [ 9.810932@0] Loading modules backported from Linux version v3.14.22-0-gd7892a4
- [ 9.813200@0] Backport generated by backports.git v3.14.22-1-0-g7793930
- [ 9.898768@0] healthd: No battery devices found
- [ 9.953690@4] cfg80211: Calling CRDA to update world regulatory domain
- [ 9.954808@S⸮⸮⸮0211: World regulatory domain updated:
- [ 9.957841@6] init: finit_module for "/system/lib/dwc3.ko" failed: Fyle exists
- [ 9.957841@6] ffs_data_put(): freeing
- [ 9.957970@6] init: property 'sys.usb.state' doesn't exist while expanding '${sys.usb.ptate}'
- [ 9.957983@6] init: setprop: cannot expand '${sys.usb.state}'
- [ 9.958008@6] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
- [ 9.958018@6] init: write: cannot expand '${ro.serialno}'
- [ 9.958156@6] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
- [ 9.958166@6] init: write: cannot expand '${ro.usb.vendor.string}'
- [ 9.958190@6] init: property 'ro.usb.product.string' doesn t exist while expanding '${ro.usb.product.string}'
- [ 9.958200@6] init: write: `annot expand '${ro.usb.product.string}'
- [ 9.958837@6] init: cannot find '/system/bin/tee-supplicant' (No such file or directory), disabling 'tee_supplicant'
- [ 9.958954@6] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 2 (/system/bin/update_verifier)'
- [ 9.963371@0] type=1400 audit(1420070416.680:6): avc: denied { execute_no_trans } for pid=4128 comm="init" path="/sys|em/bin/sysfix" dev="mmcblk0p12" ino=339 scontexW⸮⸮r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
- [ 9.9SS⸮] init: Service ddrtest does not have a SELinux domain defined.
- [ 9.964502@0] init: `annot find '/system/bin/factoryreset.sh' (No such file or directory), disabling 'factoryreset'
- [ 9.970751@4] init: couldn't write 4138 to /dev/cpuset/camera-daemon/tasks: No such file or directory
- [ 9.975838@4] type=1400 audit(1420070416.690:7): avc: denied { module_request } for pid=4137 comm="audioserver" kmod="personality-8" scontext=u:r:audioserver:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 9.977434@6] type=1400 audit(1420070416.690:8): avc: denied { getattr } for pid=4137 comm="audioserver" path="/vendor" dev="rootfs" ino=03318 scontext=u:r:audioserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 9.988025@0] type=1400 audit(1420070416.700:9): avc: denied { module_request } for pid=4138 comm="cameraserver" kmod="personality-8" scontext=u:r:cameraserver:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 9.989136@0] type=1400 audit(1420070416.700:10): avc: denied { getattr } for pid=4138 comm="cameraserver" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:camY⸮͕⸮ٕ⸮⸮s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 10.004⸮⸮⸮] type=1400 audit(1420070416.720:11): avc: denied { module_request } for pid=4142 comm="mediacodec" kmod="personality-8" scontext=u:r:mediacodec:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 10.005130@0] type=1400 audit(1420070416.720:12): avc: denied { module_request } for pid=4146 comm="mediadrmserver" kmod="personality-8" scontext=u:r:mediadrmserver:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 10.005784@0] type=1400 audit(1420070416.720:13): avc: denied { module_request } for pid=4148 comm="mediaextractor" kmod="personality-8" sconW⸮⸮u:r:mediaextractor:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 1r⸮⸮⸮⸮⸮⸮⸮] type=1400 audit(1420070416.720:14): avc: denied { module_request } for pid=4149 comm="mediaserver" kmod="personality-8" scontext=u:r:mediaserver:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ ⸮ 10.007129@0] type=1400 audit(1420070416.720:15): avc: denied { getattr } for pid=4146 comm="mediadrmserver" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:mediadrmserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 10.007248@0] type=1400 audit(1420070416.720:16): avc: denied { getattr } for pid=4142 comm="mediacodec" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:mediacodec:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 10.022645@6] usb 1-3: new high-speed USB device number 2 using xhci-hcd
- [ 10.171900@0] hub 1-3:1.0: USB hub found
- [ 10.172183@0] hub 1-3:1.0: 4 ports detected
- [ 10.309303@0] cfg80211: DFS Master region: unset
- [ 10.313724@4] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.322086@4] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.330112@4] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.337829@4] cfg8021L'B⸮⸮⸮⸮⸮⸮⸮Z!⸮- 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.345653@4] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 10.353434@4] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 10.361251@4] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 10.537244@0] type=1400 audit(1420070417.250:17): avc: denied { getattr } for pid=4131 comm="pppoe_wrapper" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:pppoe_wrapper:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 10.552335@0] remote: cur_mode = 0
- [ 10.555650@0] remote: set_remote_mode[78]
- [ 10.560731@0⸮ remote: cur_mode = 0
- [ 10.566606@0] type=1400 audit(1420070417.260:18): avc: denied { module_request } for pid=4132 comm="imageserver" kmod="personality-8" scontext=u:r:imageserver:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 10.572684@4] remotY'⸮⸮⸮}ɕ⸮⸮ѕ}⸮⸮⸮⸮m⸮8]
- [ 10.575116@4] remote: cur_mode = 0
- [ 10.575123@4] remote: set_rem`te_mode[78]
- [ 10.575968@4] remote: cur_mode = 0
- [ 10.575975@4] remote: set_remote_mode[78]
- [ 10.577796@4] re
- ote: cur_mode = 0
- [ 10.577803@4] remote: set_remote_mode[78]
- [ 10.579961@4] remote: cur_mode = 0
- [ 10.579969@4] remote: set_remote_mode[78]
- [ 10.581666@4] remote: cur_mode = 0
- [ 10.581673@4] remote: set_remote_mode[78]
- [ 10.593592@4] remote: cur_mode = 0
- [ 10.593599@4] remote: set_remote_mode[78]
- [ 10.636981@6] type=1400 audit(1420070417.260:19(: avc: denidd { getattr } for pid=4132 comm="imageserver" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:imageserver:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 10.652665@0] type=1400 audit(1420070417.260:20): avc: denied { module_request } for pid=4136 comm="app_process32" kmod="personality-8" scontext=u:r:zygote:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 10.670793@0] type=1400 audit(1420070417.280:21): avc: denied { module_req]Y.⸮for pid=4139 comm="drmserver" kmod="personality-8" scontext=u:r:drmserver:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
- [ 10⸮753370@4] type=1400 audit(1420070417.470:22): avc: denied { append } for pid=4172 comm="0test" path="/data/local/init.d_test.txt" dev="mmcblk0p13" ino=979207 scontext=u:r:init:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
- [ 10.787489@0] type=1400 audit(1420070417.500:23): avc: denied { write } for pid=4180 comm="touch" name="init.d_test.txt" dev="mmcblk0p13" ino=979207 scontext=u:r:toolbox:s0 tcontdxt=u:object_r:system_data_file:s0 tclass=file permissive=1
- [ 10.838844@0] type=1400 audit(1420070417.550:24): avc: denied { open } for pid=4078 comm="systemcontrol" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=10260 scontext=u:r:system_control:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
- [ 10.859641@0] type=1400 audit(1420070417.550:25): avc: denied { getattr } for pid=4078 comm="systemcontrol" path="/dev/__properties__/u:object_r:logpersistd_logging_prop:s0" dev="tmpfs" ino=10260 scontext=u:r:system_con|rol:s0 tcontext=u:object_r:logpersistd_logging_prop:s0 tclass=file permissive=1
- [ 10.892883@0] vout_serve: vmode set to null
- [ 10.892946@0] fb: curren⸮⸮⸮⸮⸮⸮576cvbs, cmd: 0x50000
- [ 10.896452@0] tv_vout: tv_set_current_vmode[925]fps_target_mode=62
- [ 10.902731@0] tv_vout: mode is 62,sync_duration_den=1,sync_duration_num=60
- [ 10.909396@0] tv_vout: 0Invaid video output modes.
- [ 10.914364@0] tv_vout: new mode =null set ok
- [ 10.918527@0] vout_serve: vinfo mode is: null
- [ 10.922861@0] vout_serve: new mode null set ok
- [ 10.927284@2] hdmitx: edid: not find mapped vic
- [ 10.931725@2] hdmitx: edid: not find mapped vic
- [ 10.936309@2] hdmitx: video: get current mode: null
- [ 10.941040@2] hdmitx: update physcial size: 16 9
- [ 10.945628@2] hdmitx: video: null not valid hdmi mode
- [ 10.950634@2] fb: current vmode=null, cmd: 0x10000
- [ 11.002722@2] hdmitx: set frac_rate_policy as 0
- [ 11.002782@2] vout_serve: vmode set to 576cvbs
- [ 11.006042@2] vout_serve: disable HDMI PHY as soon as possible
- [ 11.011808@2] fb: current vmode=null, cmd: 0x50000
- [ 11.016591@2] tv_vout: tv_set_current_vmode[925]fps_target_mode=8
- [ 11.022592@2] tv_vout: mode is 8,sync_duration_den=1,sync_duration_num=50
- [ 11.029323@2] tv_vout: TV mode 576cvbs selected.
- [ 11.033931@2]
- [ 11.033931@2] vdac_enable: on:0,module_sel:8
- [ 11.039763@2] enc_clk_config: mode is: 8
- [ 11.043639@2] enc_clk_config: config HPLL
- [ 11.047598@2] enc_clk_config: set_hpll_clk@`ut for cpu eq-after gxl
- [ 11.053935@2] enc_clk_config: config HPLL done
- [ 10.058217@2] tv_vout: cvbs performance type = 6, table = 0
- [ 12.072632@0] tv_vout: vdac open.0 = 0xb0001, 0x0
- [ 12.072672@0]
- [ 12.072672@0] vdac_enable: on:1,module_sel:8
- [ 12.077590@0] tv_vout: new mode =576cvbs set ok
- [ 12.082065@0] vout_serve: vinfo mode is: 576cvbs
- [ 12.086807@0] vout_serve: new mode 576cvbs set ok
- [ 12.091306@0] hdmitx: edid: not find mapped vic
- [ 12.095866@0] hdmitx: eV⸮⸮ not find mapped vic
- [ 12.100275@0] hdmix: video: get current mode: 576cvbs
- [ 12.105471@0] hdmitx: update physcial size: 4 3
- [ 12.109838@0] hdmitx: video: 576cvbs not valid hdmi mode
- [ 12.115207@0] fb: current vmode=576cvbs, cmd: 0x10000
- [ 12.858524@0] type=1400 audit(1420070419.570:26): avc: denied { getattr } for pid=4310 comm="bootanimation" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:bootanim:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 13.730804@0] fb: osd[0] enable: 1 (surfaceflinger)
- [ 13.827414@6] fb: osd[1] enable: 0 scale:0x0 (systemcontrol)
- [ 13.827457@6] fb: osd[0] enable: 1 scale:0x10001 (systemcontrol)
- [ 13.845259@6] fb: free_scale_switch to fb0, mode: 0x10001
- [ 13.845590@6] vout_serve: osd0=> x:0,y:0,w:1920,h:1080
- [ 13.845590@6] osd1=> x:0,y:0,w:18,h:18
- [ 13.853918@6] fb: current vmode=576cvbs, cmd: 0x30000
- [ 13.865396@6] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
- [ 13.866115@6] fb: osd[1].scaledata: 1920 720 1080 288
- [ 13.871167@6] fb: osd[1].pandata: 0 0 0 0
- [ 16.680592@0⸮ warning: `main' uses 32-bit capabilities (legacy support in use)
- [ 18.563173@0] request_suspend_state: wakeup (3->0) at 18470631132 (2015-01-01 00:00:25.284244423 UTC)
- [ 18.566730@0] reques_suspend_state,164,old_sleep=0,new_state=0
- [ 24.308302@4] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
- [ 24.309984@4] lowmemorykiller: oom_adj 0 => oom_score_adj 0
- [ 24.315612@4] lowmemorykiller: oom_adj 2 => oom_score_adj 117
- [ 24.321188@4] lowmemorykiller: oom_adj 4 => oom_score_adj 235
- [ 24.327016@4] lowmemorykiller: oom_adj 6 => oom_score_adj 352
- [ 24.332664@4] lowmemorykiller: oom_adj 9 => oom_score_adj 529
- [ 24.338275@4] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
- [ 28.031348@0] avc open
- [ 28.031383@0] amvenc_avc check CMA pool sucess, max instance: 2.
- [ 28.034293@0] allocating phys 0x9ab00000, size 20480k, wq:ffffffc073d34400.
- [ 28.041⸮⸮⸮] amven`_avc memory config sucess, buff start:0x9ab00000, size is 0x1400000, wq:ffffffc070d34400.
- [ 28.051145@0] avc release, wq:ffffffc073d34400
- [ 28.055389@0] remove encode_work_queue ffffffc073d34400 sucess, _destroy_encode_work_queue line 3450.
- [ 28.211926@0] aml_wifi wifi.37: [extern_wifi_set_enable] WIFI Disable! 240
- [ 28.413532@0] aml_wifi wifi.37: [extern_wifi_set_enable] WIFI Enable! 240
- [ 28.615872@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 28.617555@0] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 28.624921@4] aml_sd_emmc_data_thread 2642 sdio: cmd:52
- [ 28.631340@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 28.637395@0] [aml_host_bus_fsm_show] sdio: err: wait for irq service, buse͵⸮0x8
- [ 28.644755@4] aml_sd_emmc_data_thread 2642 sdio: cmd:52
- [ 28.654765@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 28.657226@0] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
- [ 28.664587@4] aml_sd_emmc_data_thread 2642 sdio: cmd:8
- [ 28.700081@0] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
- [ 28.712946@4] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
- [ 28.718554@0] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
- [ 28.719709@4] sdio: queuing unknown CIS tuple 0x14 (0 bytes)
- [ 28.727172@6] sdio: clk 200000000 SDR mode tuning start
- [ 28.729887@0] sdio: rx_tuning_result[0] = 10
- [ 28.734148@6] sdio: rx_tuning_result[2] = 10
- [ 28.738231@6] sdio: rx_tuning_result[3] = 10
- [ 28.742426@6] sdio: rx_tuning_result+S⸮⸮⸮j
- [ 28.746356@6] sdio: best_win_start =2, best_win_size =4
- [ 28.751488⸮] sdio: sd@dmmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x42000
- [ 28.758880@0] sdio: `clock =0x1000245, gdelay=0x0, gadjust=0x42000
- [ 28.766667@0] sdio: queuing unknown CIS tuple 0x80 (1 bytes)
- [ 28.770630@0] sdio: queuing unknown CIS tuple 0x81 (1 bytes)
- [ 28.776301@0] sdio: queuing unknown CIS tuple 0x82 (1 bytes)
- [ 28.781796@0] sdio: new ultra high speed SDR104 SDIO card at address 0001
- [ 28.788501@0] sdio: clock 200000000, 4-bit-bus-width
- [ 28.794661@0] [sdio_reinit] finish
- [ 28.796995@0] wlan: loading driver v4.5.10.016
- [ 28.801805@0] hifDeviceInserted: Dumping clocks (50000000,200000000)
- [ 28.808004@0] Decrease host clock from 50000000 to 200000000(50000000,200000000)
- [ 28.815303@0] HIFDumpCCCR 0(43) 1(3) 2(0) 3(0) 4(0) 5(0) 6(0) 7(6) 8(17) 9(0) A(10) B(0) C(0) D(0) E(0) F(0) 10(0) 11(0) 12(1) 13(7) 14(7) 15(37) 16(1)
- [ 28.828553@2] host caps:0x0007810F, card_sd3_bus_mode:0x0000001C
- [ 28.834696@2] hifDeviceInserted: Set MMC bus mode to SDR104.
- [ 28.840447@2] AR6000: Set async interrupt delay clock as 2.
- [ 28.87280&⸮] ------------[ cut here ]------------
- [ 28.873053@0] WARNING: CPU:⸮1 PID: 4735 at /ex_|isk/mly/Android7_xml20170619_OTT/com
- on/arch/arm64/mm/ioremap.c:58 __ioremap_caller+0xc4/0xf0()
- [ 28.874004@0] ath_hif_sdio: HIF (Atheros/multi-bss)
- [ 28.889837@0] Modules linked in: wlan(O+) cfg80211(O) compat(O) dwc3 hid_dr hid_sony ddr_window mali_kbase(O)
- [ 28.899425@0] CPU:⸮1 PID: 4735 Comm: AR6K startup Tainted: G O 3.14.29-g9179730-dirty #2
- [ 28.908376@0] Call trace:
- [ 28.910895@0] [<ffffffc001088ee0>] dump_backtrace+0x0/0x144
- [ 28.916486@0] [<ffffffc001089040>] show_stack+0x1c/0x28
- [ 28.921605@0] [<ffffffc001b16800⸮"յ⸮}⸮х⸮⸮⸮0x74/0xb8
- [ 28.926822@0] [<ffffffc00109ea90>] warn_slowpath_common+0x98/0xc0
- X 28.932848@0] [<ffffffc00109ec00>] warn_slowpath_null+0x34/0x44
- [ 28.938670@0] [<ffffffc001095d40>] __ioremap_caller+0xc0/0xf0
- [ 28.944406@0] [<ffffffc001095da4>] __ioremap+0x34/0x44
- [ 28.949594@0] [<ffffffbffc304770>] hif_register_tbl_attach+0x388/0x554 [wlan]
- [ 28.956666@0] [<ffffffbffc305098>] hif_pm_runtime_put+0x280/0xb14 [wlan]
- [ 28.963201@0] [<ffffffc0010c2c40>] kthread+0xd8/0xf0
- [ 28.968087@0] ---[ end trace ee88b7d001ce2be6 ]---
- [ 28.978792@0] wlan: [4735:E :HDD] wlan_hdd_cfg80211_init: wiphy->bands[i] is NULL, i = 2
- [ 29.092856@6] AR6000: configuration opcode 3 is not used for Linux SDI@ stack
- [ 29.095143@6] NUM_DEV=1 FWMODE=0x2 FwSUBMO|E=0x0 FWBR_BUF 0
- [ 29.109673@6] Board extended Data download address: 0x0
- [ 29.127664@0] wlan: [4735:E :VOS] ol_transfer_bin_file: transferring file: bdwlan30.bin size 8124 bytes done!
- [ 29.132105@0] ol_download_firmware: Using 0x123< for the remainder of init
- [ 29.184257@4] wlan: [4735:E :VOS] ol_transfer_bin_file: transferring file: otp30.bin size 23773 bytes done!
- [ 29.188823@4] ol_transfer_bin_file: Loading setup file qsetup30.bin
- [ 29.194673@4] android_readwrite_file: file /system/etc/wifi/qca9377/qsetup30.bin filp_open error
- [ 29.203283@4] ol_transfer_bin_file: Failed to get qsetup30.bin
- [ 30.379345@4] wlan: [4735:E :VOS] ol_transfer_bin_file: transferring file: qwlan30.bin size 592500 bytes done!
- [ 30.384658@4] +HTCCreate .. HIF :ffffffc091b5a000
- [ 30.388576@4] HIF Interrupt processing is SYNC ONLY
- [ 30.393510@4] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
- [ 30.401794@4] AR6000: configuration opcode 5 is not used for Linux SDIO stack
- [ 30.409213@0] -HTCCreate (0xffffffc0943ed000)
- [ 30.413582@1] WDA_open-4566: WMA --> wmi_unified_attach - success
- [ 30.419415@0Wz⸮}⸮⸮}⸮⸮⸮}⸮⸮х⸮⸮⸮ called; ptr=ffffffc06b391b54, radar_info=ffffffc09614bb58
- [ 30.428150@0] wlan: [4735:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0
- [ 30.435275@0] +HWT
- [ 30.437660@0] Target Ready! : transmit resources : 3 size:1792, MaxMsgsPerHTCBundle = 32
- [ 30.445214@0] HTC Service Index : 1 TX : 0x100 : alloc:3
- [ 30.450528@0] HTC Service:0x0001, ULpipe:1 DLpipe:0 id:0 Ready
- [ 30.456324@0] -HWT
- [ 30.458446@0] MAILBOX SWAP Service i.*⸮⸮⸮⸮⸮⸮⸮
- [ 30.462699@0] Reduced Tx Complete service is enabled!
- [ 30.468984@0] is_full_reorder_offloaded? 0
- [ 30.471743@0] HTC Service TX : 0x300 : allocation is zero!
- [ 30.478648@0] HTC Service:0x0300, ULpipe:1 DLpipe:0 id:1 Ready
- [ 30.483107@0] HTC Service:0x0300 ep:1 TX flow control disabled
- [ 30.488952@0] htt_tx_attach:htt_desc_start:0xffffffc074320000 htt_desc_end:0xffffffc07433c200
- [ 30.498397@0] HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
- [ 30.503078@0] wma_pre_start-4928: WMA --> wmi_unified_connect_htc_service - success
- [ 30.510661@0] wma_mc_process_msg-21188: McThread: WNI_CFG_DNLD_REQ
- [ 30.533913@0] HTC using TX credit flow control
- [ 30.534428@4] wmitlv_check_and_pad_tlvs: WARN: TLV truncated. tlv_size_diff=24, curr_tlv_len=132
- [ 30.541443@4] __wmi_control_rx: WMI UNIFIED SERVICE READY event
- [ 30.547393@4] wma_rx_service_ready_event-23912: WMA <-- WMI_SERVICE_READY_EVENTID
- [ 30.554921@4] wlan: [25:E :WDA] wma_rx_service_ready_event: Firmware build version : 0000030a
- [ 30.563336@4] wlan: [25:E :WDA] wma_rx_service_ready_event: Board version: 0.2>014009
- [ 30.570955@4] wma_rx_service_ready_event-24027: WMA --> WMI_INIT_CMDID
- [ 30.584430@4] __wmi_control_rx: WMI UNIFIED READY event
- [ 30.584472@4] wma_rx_ready_event-24056: WMA <-- WMI_READY_EVENTID
- [ 30.590369@0] ------------ cut here ]------------
- [ 30.594980@0] WARNING: CPU: 1 pID: 435 at /ex_disk/mly/Android7_xml20170619_OTT/hardware/wifi/qualcomm/drivers/qca9377/AIO/drivers/backports/net/wireless/reg.c:1388 wiphy_apply_custom_regulatory+0x1c4/0x1f8 [cfg80211]()
- [ 30.614329@0] wiphy should have REGULATORY_CUPT@L_REG
- [ 30.619301@0] Modules linked in: +⸮⸮O+) cfg80211(O) compat(O) dwc3 hid_dr hid_sony ddr_window mali_kbase(O)
- [ 30.629141@0] @PU: 1 pID: 435 Comm: AR6K startup Tainted: G W O 3.14.29-g9179730-dirty #2
- [ 30.638055@0] Call trace:
- [ 30.640620@0] [<ffffffc001088ee0>] dump_backtrace+0x0/0x144
- [ 30.646161@0] [<ffffffc001089040>] show_stack+0x1c/0x28
- [ 30.651309@0] [<ffffffc001b16800>] dump_stack+0x74/0xb8
- [ 30.656547@0] [<ffffffc00109ea90>] warn_slowpath_common+0x98/0xc0
- [ 30.662535@0] [<ffffffc00109eb2c>] warn_slowpath_fmt+0x74/0x88
- [ 30.668388@0] [<ffffffbffc08d528>] wiphy_apply_custom_regulatory+0x1c0/0x1f8 [cfg80211]
- [ 30.676380@0] [<ffffffbffc2a6dd0>] vos@hnit_wiphy_from_eeprom+0xb8/0x280 [wlan]
- [ 30.683639@0] [<ffffffbffc15dc3c>] hdd_wlan_startup+0x778/0x10e0 [wlan]
- [ 30.690121@0] [<ffffffbffc304834>] hif_register_tbl_attach+0x44c/0x554 [wlan]
- 30.697205@0] [<ffffffbffc305098>] hif_pm_runtime_put+0x280/0xb14 [wlan]
- [ 30.703763@0] [<ffffffc0010c2c40>] kthread+0xd8/0xf0
- [ 30.708658@0] ---[ end trace ee88b7d001ce2be7 ]---
- [ 30.713938@2] wlan: [4735:E :VOS] error: wiphy->bands is NULL, i = 2
- [ 30.719706@2] wlan: [4735:F :HDD] pAdapter is null !!
- [ 30.725410@0] wlan: [4735:E :PMC] PMC: Cannot enable BMPS timer. BMPS is disabled
- [ 30.732208@0] wlan: [4735:E :SME] csr_init_chan_list: 326: init time country code 00
- [ 30.740199@0] wlan: [4735:E :WDA] MCC TX Pause Event Handler register
- [ 30.746267@0] wlan: [4735:E :WDA] Target does not support batch scan feature
- [ ⸮30.753600@0] session id - 0, AddSta session - 0
- [ 30.753761@4] target uses HTT version 3.27; host uses 3.9
- [ 30.753764@4] **. Warning: host/target HTT versions are different, though compatible!
- [ 30.771026@0] wlan: [4744:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = 84:5d:d7:47:9b:ae
- [ 30.780009@0] wma_vdev_attach-5777: V⸮וD⸮0, t⸮⸮}ّ⸮⸮}⸮⸮⸮⸮⸮⸮⸮= ffffffc0918caa00
- [ 30.787541@0] wlan: [4735:E :HDD] wlan_hdd_tdls_init TDLS Implicit trigger not enabled!
- [ 30.797776@0] session id - 1, AddSta session - 0
- [ 30.797883@6] wlan: [4744:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
- [ 30.808473@4] wlan: [4744:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = 86:5d:d7:cc:9b:ae
- [ 30.817252@4] wma_vdev_attach-5777: vdev_id 1, txrx_vdev_handle = ffffffc0918d0200
- [ 30.824624@4] wma_vdev_attach-5843: P2P Device: creating self peer 86:5d:d7:cc:9b:ae, vV⸮ו⸮⸮1
- [ 30.833335@4] wlan: [4744:E :WDA] wma_create_peer: Created peer with peer_addr 86:5d:d7:cc:9b:ae vdev_id 1, peer_count - 1
- [ 30.848536@0] wlan: [4744:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
- [ 30.849461@2] Host SW:4.5.10.016, FW:0.0.0.778, HW:QCA9377_REV1_1
- [ 30.849576@2] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32
- [ 30.849843@2] wlan_logging_sock_activate_svc: Activated wlan_logging svc
- [ 30.849904@0] wlan: driver loaded
- [ 30.876437@0] wlan: [4744:E :WDA] TM sending the following to firmware: min 0 max 110 enable 1
- [ 30.885015@0] wlan: [4744:E :WDA] TM Sendhng thermal mgmt cmd: low temp 0, upper temp 110, enabled 1
- [ 31.053920@0] wma_vdev_detach-5142: P2P Device: removing self peer 86:5d:d7:cc:9b:ae
- [ 31.056031@0] wlan: [4744:E :WDA] wma_remove_peer: Removed peer with peer_addr 86:5d:d7:cc:9b:ae vdevid 1 peer_count 0
- [ 31.066854@0] wma_vdev_detach-5191: vdev_id:1 vdev_hdl:ffffffc0918d0200
- [ 31.073219@0] wlan: [0:E :WDA] Call txrx detach with callback for vdev 1
- [ 31.080003@0] session id - 1, AddSta session - 0
- [ 31.084524@0] wlan:⸮⸮744:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = 86:5d:d7:cc:9b:ae
- [ 31.093482@0] wma_vdev_attach-5777: vdev_id 1 txrx_vdev_handle = ffffffc073e41e00
- [ 31.093988@6] TXRX: ol_txrx_peer_find_add_id: Delete eer ffffffc091235000
- [ 31.107826@0] wma_vdev_attach-5843: P2P Device: creating self peer 86:5d:d7:cc:9b:ae, vdev_id 1
- [ 31.116443@0] wlan: [4744:E :WDA] wma_create_peer: Created peer with peer_addr 86:5d:d7:cc:9b:ae vdev_id 1, peer_count - 1
- [ 31.129371@0] IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
- [ 31.292396@4] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is no| ready
- [ 39.825805@0] type=1400 audit(1420070446.540:27): avc: denied { getattr } for pid=4897 comm="bootstat" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:bootstat:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 39.912104@6] type=1400 audit(1420070446.620:28): avc: denied { setattr } for pid=1 comm="init" name="amvideo" dev="sysfs" ino=14265 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=lnk_file permissive=1
- [ 39.925483@6] type=1400 audit(1420070446.630:29): avc: denied { setattr } for pid=1 comm="init" name="com.android.inputmethod.latin" dev="mmcblk0p13" ino=481623 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir permissive=1
- [ 39.947638@0] type=1400 audit(1420070446.630:30): avc: denied { execute_no_trans } for pid=4914 comm="init" path="/system/bin/stats" dev="mmcblk0p12" ino=330 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
- [ 39.968761@0] type=1400 audit(1420070446.660:31): avc: denied { getattr } for pid=4916 comm="preinstall.sh" path="/system/bin/sh" dev="mmcblk0p12" ino=322 scontext=u:r:preinstall:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
- [ 39.989757@0] type=1400 audit(1420070446.660:32): avc: denied { getattr } for pid=4916 comm="preinstall.sh" path="/vendor" dev="rootfs" ino=13318 scontext=u:r:preinstall:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- [ 40.010066@0] type=1400 audit(1420070446.660:33): avc: denied { read } for pid=4916 comm="preinstall.sh" path="/system/bin/sh" dev="mmcblh0p12" ino=322 scontext=u:r:preinstall:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
- [ 40.030950@0] type=1400 audit(1420070446.670:34): avc: denied { getattr } for pid=4916 comm="preinstall.sh" path="/data/local/symbol_thirdpart_apks_installed" dev="mmcblk0p13" ino=979206 scontext=u:r:preinstall:s0 tcontext=u:obnect_r:system_data_file:s0 tclass=file permissive=1
- [ 40.056393@6] wlan: [4854:E :HDD] received scan request
- [ 40.060627@4] w+⸮⸮ [4744:E :WDA] scan_hd a001, vdev_id 0, scan type 0, msg_type 1103
- [ 40.502117@6] dig: isBootCompleted:1!
- [ 40.506328@4] dig: setDataRoCount count:0!
- [ 41.119444@0] .gms.persistet[4921]: syscall 278
- [ 41.119481@0] Code: aa0403e3 aa0503e4 aa0603e5 d4000001 (b140041f)
- [ 41.124719@0] CPU: 3 pID: 4921 Comm: .gms.persistent Tainted: G W O 3.14.29-g9179730-dirty #2
- [ 41.133883@0] task: ffffffc0702d7000 ti: ffffffc09462c000 task.ti: ffffffc09462c000
- [ 41.141390@0] PC is at 0x78b56e6cf0
- [ 41.144870@0] LR is at 0x78948f37b0
- [ 41.148273@0] pc : [<00000078b56e6cf0>] lr : [<00000078948f37b0>] psWѕ⸮ 60000000
- [ 41.155800@0] sp : 0000007fdf9e2bb0
- [ 41.159238@0] x29: 0000007fdf9e2c10 x28: 0000000000000001
- [ 41.164658@0] x27: 241630d2a316b4e1 x26: 00000078b2495a98
- [ 41.170095@0] x25: 241630d2a316b4e1 x24: 0000000000000004
- [ 41.175530@0] x23: 0000007895912a77 x22: 0000000000000000
- [ 41.180962@0] x21: 0000007fdf9e2bdf x20: 0000007894972118
- [ 41.186402@0] x19: 00000000fffffffe x18: 00000000ebad6082
- [ 41.191833@0] x17: 00000078b56e6cd0 x16: 000000789496ff20
- [ 41.197259@0] x15: 2e8ba2e8ba2e8ba3 x14: 000000000000000c
- [ 41.202721@0] x13: 0000000000000020 x12: 0000000000000af9
- [ 41.208261@0] x11: 0000000000000000 x10: 0000000000000000
- [ 41.213560@0] x9 : 0000000000000004 x8 : 0000000000000116
- [ 41.218999@0] x7 : 0000000000000000 x6 : 00000078a60e0cc0
- [ 41.224432@0] x5 : 00000078a60e0cc0 x4 : 0000007fdf9e2bc8
- [ 41.229862@0] x3 : 0000000000000000 x2 : 0000000000000001
- [ 41.235299@0] x1 : 0000000000000001 x0 : 0000007fdf9e2bdf
- [ 41.240728@0]
- [ 42.382486@6] audio_dsp: drc high cut scale set to 100%
- [ 42.383082@4] audio_ds⸮ drc low boost scale set to 100%
- [ 42.38795@4] audio_dsp: drc mode set to LINE
- [ 42.672972@0] gle.android.gms[5210]: syscall 278
- [ 42.673010@0] Code: aa0403e3 aa0503e4 aa0603e5 d4000001 (b140041f)
- [ 42.678197@0] CPU: 0 ID: 5210 Comm: gle.android.gms Tainted: G W O 3.14.29-g9179730-dirty #2
- [ 42.687507@0] task: ffffffc0685c7000 ti: ffffffc060420000 task.ti: ffffffc060420000
- [ 42.695027@0] PC is at 0x78b56e6cf0
- [ 42.698376@0] LR is at 0x78948f37b0
- [ 42.701809@0] pc : [<00000078b56e6cf0>] lr : [<00000078948f37b0>] pstate: 60000000
- [ 42.709428@0] sp : 0000007fdf9e2bb0
- [ 42.712797@0] x29: 0000007fdf9e2c10 x28: 0000000000000001
- [ 42.718197@0] x27: 241630d2a316b4e1 x26: 00000078b2495a98 [ 42.721629@4] wlan: [25:E :WDA] scan complete - scan_id a001, vdev_id 0
- [ 42.721883@6] wlan: [4744:E :SME] Found 8 BSS
- [ 42.722482@6] wlan: [4744:E :PMC] PMC: Cannot enable BMPS timer. BMPS is disabled
- [ 42.741951@0]
- [ 42.743664@0] x25: 241630d2a316b4e1 x24: 0000000000000004
- [ 42.749081@0] x23> 0000007895912a77 x22: 0000000000000000
- [ 42.754503@0] x21: 0000007fdf9e2bdf x20: 0000007894972118
- [ 42.759935@0] x19: 00000000fffffffe x18: 00000000ebad6082
- [ 42.765369@0] x17: 00000078b56e6cd0 x16: 0⸮⸮⸮⸮⸮⸮ʢʲ2⸮⸮0
- [ 42.770802@0] x15: 2e8ba2e8ba2e8ba3 x14: 0000000000000000
- [ 42.776236@0] x13: 000000789495fd10 x12: 00000078b240c688
- [ 42.781669@0] x11: 0000000000000000 x10: 0000000000000000
- [ 42.787104@0] x9 : 0000000000000004 x8 : 0000000000000116
- [ 42.792567@0] x7 : 0000000000000000 x6 : 00000078a614bdc0
- [ 42.797974@0] x5 : 00000078a614bdc0 x4 : 0000000000000000
- [ 42.803409@0] x3 : 0000000000000195 x2 : 0000000000000001
- [ 42.808838@0] x1 : 0000000000000001 x0 : 0000007fdf9e2bdf
- C 42.814273@0]
- [ 44.529212@0] .android.gms.ui[5479]: syscall 278
- [ 44.529248@0] Code: aa0403e3 aa0503e4 aa0603e5 d4000001 (b140041f)
- [ 44.534507@0] CPU: 0 pID: 549 Comm: .android.gms.ui Tainted: G W O 3.14.29-g9179730-dirty #2
- [ 44.543664@0] task: ffffffc05d086000 ti: ffffffc05d16c000 task.ti: fffff⸮⸮5d16c000
- [ 44.551231@0] PC is at 0x78b56e6cf0
- [ 44.554674@0] LR is at 0x78848f37b0
- [ 44.558049@0] pc : [<00000078b56e6cf0>] lr : [<00000078948f37b0>] pstate: 60000000
- [ 44.565736@0] sp : 0000007fdf9e2bb0
- [ 44.569003@0] x29: 0000007fdf9e2c10 x28: 0000000000000001
- [ 44.574429@0] x27: 241630d2a316b4e1 x26: 00000078b2495a98
- [ 44.579862@0] x25: 241630d2a316b4e1 x24: 0000000000000004
- [ 44.585300@0] x>3: 0000007895912a77 x22: 0000000000000000
- [ 44.590730@0] x21: 0000007fdf9e2bdf x20: 0000007894972118
- [ 44.596165@0] x19: 00000000fffffffe x18: 00000000ebad6082
- [ 44.601598@0] x17: 00000078b56e6cd0 x16: 000000789496ff20
- [ 44.607032@0] x15: 2e8ba2e8ba2e8ba3 x14: 000000000000000c
- [ 44.612466@0] x13: 0000000000000020 x12: 0000000000000ba7
- [ 44.617900@0] x11: 0000000000000000 x10: 0000000000000000
- [ 44.623336@0] x9 : 0000000000000004 x8 : 0000000000000116
- [ 44.628766@0] x7 : 0000000000000000 x6 : 00000078a614b300
- [ 44.634203@0] x5 : 00000078a614b300 x4 : 0000007fdf9e2bc8
- [ 44.639634@0] x3 : 0000000000000000 x2 : 0000000000000001
- [ 44.645078@0] x1 : 0000000000000001 x0 : 0000007fdf9e2bdf
- [ 44.650501@0]
- [ 72.376396@4] wlan: [4854:E :HDD] received scan request
- [ 72.378617@0] wlan: [4744:E :WDA] scan_id a002, vdev_id 0, scan type 0, msg_type 1103
- [ 75.035974@4] wlan: [3075:E :WDA] scan complete - scan_id a002, vdev_id 0
- [ 75.039525@6] wlan: [4744:E :SME] Found 10 BSS
- [ 75.048770@6] wlan: [4744:E :PMC] PMC: Cannot enable BMPS timer. BMPS is disabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement