broken_update

[sudo] Passwort für frank:


Willkommen zu minicom 2.7.1

Optionen: I18n
Übersetzt am Dec 23 2019, 02:06:26.
Port /dev/ttyUSB0, 10:44:07

Drücken Sie CTRL-A  Z für Hilfe zu speziellen Tasten
DDR Version V1.11 20211103
ln
ddrconfig:7
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -24ps, dqs3: -144ps,
tdqss: cs1 dqs0: -24ps, dqs1: -72ps, dqs2: -48ps, dqs3: -168ps,

change to: 324MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x63

change to: 528MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1560MHz(final freq)
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:22%
dram drv:40,odt:80
vref_ca:00000071
clk skew:0x21
cs 0:
the read training result:
DQS0:0x39, DQS1:0x37, DQS2:0x3b, DQS3:0x34,
min  :0x12 0x14 0x16 0x12  0x2  0x6  0xa  0x3 , 0xd  0xc  0x4  0x2  0xf  0xf 0x,
      0x17 0x17 0x11  0xe  0xa  0x2  0x5  0x5 ,0x12  0xf  0xa  0x2 0x14 0x12  0,
mid  :0x2f 0x30 0x33 0x2e 0x1e 0x23 0x27 0x20 ,0x27 0x27 0x20 0x1e 0x2a 0x28 0x,
      0x30 0x30 0x2b 0x27 0x21 0x1d 0x1d 0x20 ,0x2d 0x28 0x25 0x1e 0x2d 0x2d 0x,
max  :0x4c 0x4c 0x50 0x4b 0x3b 0x41 0x44 0x3d ,0x42 0x43 0x3c 0x3a 0x45 0x42 0x,
      0x4a 0x4a 0x45 0x41 0x38 0x38 0x36 0x3b ,0x48 0x41 0x41 0x3b 0x47 0x48 0x,
range:0x3a 0x38 0x3a 0x39 0x39 0x3b 0x3a 0x3a ,0x35 0x37 0x38 0x38 0x36 0x33 0x,
      0x33 0x33 0x34 0x33 0x2e 0x36 0x31 0x36 ,0x36 0x32 0x37 0x39 0x33 0x36 0x,
the write training result:
DQS0:0x1d, DQS1:0xe, DQS2:0x1d, DQS3:0x5,
min  :0x6a 0x6d 0x70 0x6a 0x5a 0x5d 0x63 0x62 0x61 ,0x52 0x53 0x4d 0x4d 0x57 0x,
      0x6e 0x70 0x66 0x67 0x5e 0x5c 0x5d 0x62 0x64 ,0x56 0x55 0x52 0x4d 0x59 0x,
mid  :0x86 0x88 0x8b 0x84 0x73 0x78 0x7c 0x7a 0x77 ,0x6d 0x6f 0x67 0x67 0x6f 0x,
      0x89 0x89 0x7f 0x80 0x78 0x75 0x76 0x7a 0x7b ,0x71 0x6f 0x6c 0x67 0x72 0x,
max  :0xa2 0xa4 0xa7 0x9f 0x8c 0x93 0x96 0x93 0x8e ,0x89 0x8b 0x81 0x81 0x87 0x,
      0xa5 0xa3 0x98 0x9a 0x92 0x8f 0x8f 0x92 0x93 ,0x8c 0x8a 0x87 0x81 0x8c 0x,
range:0x38 0x37 0x37 0x35 0x32 0x36 0x33 0x31 0x2d ,0x37 0x38 0x34 0x34 0x30 0x,
      0x37 0x33 0x32 0x33 0x34 0x33 0x32 0x30 0x2f ,0x36 0x35 0x35 0x34 0x33 0x,
cs 1:
the read training result:
DQS0:0x35, DQS1:0x35, DQS2:0x38, DQS3:0x32,
min  :0x12 0x11 0x14 0x12  0x1  0x5  0xa  0x2 , 0xc  0xd  0x3  0x2  0xe  0xd  0,
      0x13 0x13  0xd  0xd  0x8  0x0  0x3  0x4 , 0xd  0xb  0xa  0x1 0x13 0x13  0,
mid  :0x2d 0x2d 0x30 0x2c 0x1d 0x22 0x25 0x1d ,0x26 0x27 0x1f 0x1d 0x29 0x27 0x,
      0x2d 0x2c 0x27 0x26 0x1f 0x1b 0x1c 0x1f ,0x29 0x25 0x24 0x1d 0x2d 0x2d 0x,
max  :0x49 0x49 0x4c 0x47 0x3a 0x3f 0x41 0x39 ,0x41 0x42 0x3b 0x39 0x44 0x41 0x,
      0x47 0x46 0x42 0x3f 0x36 0x36 0x35 0x3a ,0x46 0x3f 0x3f 0x3a 0x47 0x47 0x,
range:0x37 0x38 0x38 0x35 0x39 0x3a 0x37 0x37 ,0x35 0x35 0x38 0x37 0x36 0x34 0x,
      0x34 0x33 0x35 0x32 0x2e 0x36 0x32 0x36 ,0x39 0x34 0x35 0x39 0x34 0x34 0x,
the write training result:
DQS0:0x1d, DQS1:0xe, DQS2:0x1d, DQS3:0x5,
min  :0x74 0x77 0x7a 0x74 0x63 0x69 0x6c 0x6d 0x6a ,0x61 0x63 0x59 0x59 0x63 0x,
      0x69 0x68 0x63 0x62 0x59 0x57 0x57 0x5f 0x5f ,0x52 0x50 0x4f 0x4a 0x54 0x,
mid  :0x90 0x92 0x95 0x8e 0x7c 0x82 0x85 0x84 0x82 ,0x7b 0x7c 0x73 0x72 0x7d 0x,
      0x86 0x84 0x7d 0x7c 0x74 0x71 0x71 0x78 0x78 ,0x6d 0x6a 0x69 0x62 0x6e 0x,
max  :0xac 0xae 0xb0 0xa9 0x96 0x9c 0x9f 0x9b 0x9a ,0x96 0x96 0x8e 0x8c 0x98 0x,
      0xa3 0xa1 0x97 0x96 0x8f 0x8c 0x8c 0x91 0x92 ,0x89 0x85 0x84 0x7b 0x88 0x,
range:0x38 0x37 0x36 0x35 0x33 0x33 0x33 0x2e 0x30 ,0x35 0x33 0x35 0x33 0x35 0x,
      0x3a 0x39 0x34 0x34 0x36 0x35 0x35 0x32 0x33 ,0x37 0x35 0x35 0x31 0x34 0x,
CA Training result:
cs:0 min  :0x4f 0x4a 0x43 0x3a 0x42 0x39 0x4b ,0x4e 0x44 0x42 0x39 0x40 0x33 0x,
cs:0 mid  :0x8a 0x8b 0x7c 0x7c 0x7c 0x7c 0x79 ,0x87 0x86 0x7c 0x7b 0x7a 0x77 0x,
cs:0 max  :0xc5 0xcc 0xb5 0xbf 0xb6 0xbf 0xa7 ,0xc1 0xc8 0xb6 0xbe 0xb4 0xbb 0x,
cs:0 range:0x76 0x82 0x72 0x85 0x74 0x86 0x5c ,0x73 0x84 0x74 0x85 0x74 0x88 0x,
cs:1 min  :0x4e 0x52 0x42 0x40 0x44 0x3d 0x4a ,0x4c 0x48 0x40 0x3f 0x40 0x3c 0x,
cs:1 mid  :0x8d 0x90 0x7d 0x7d 0x7f 0x7c 0x78 ,0x88 0x86 0x7d 0x7c 0x7c 0x78 0x,
cs:1 max  :0xcc 0xce 0xb8 0xbb 0xbb 0xbb 0xa7 ,0xc4 0xc4 0xbb 0xba 0xb8 0xb4 0x,
cs:1 range:0x7e 0x7c 0x76 0x7b 0x77 0x7e 0x5d ,0x78 0x7c 0x7b 0x7b 0x78 0x78 0x,
out
rockchip_sdram_size fdc20208 10000af1
rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
SDRAM base=0, size=100000000

U-Boot SPL 2022.04-2 (Apr 07 2022 - 18:03:21 +0000)
saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss.!
Trying to boot from MMC1
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-152-g4e725b15f:cl
NOTICE:  BL31: Built : 10:51:13, Jul 15 2021
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2022.04-2 (Apr 07 2022 - 18:03:21 +0000) Manjaro Linux ARM

Model: Pine64 RK3566 Quartz64-B Board
DRAM:  rockchip_sdram_size fdc20208 10000af1
rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
SDRAM base=0, size=100000000
3.7 GiB
PMIC:  RK8090 (on=0x10, off=0x00)
Core:  282 devices, 21 uclasses, devicetree: separate
MMC:   rockchip_sdhci_probe clk set rate fail!
mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
Loading Environment from nowhere... OK
In:    serial@fe660000
Out:   serial@fe660000
Err:   serial@fe660000
Model: Pine64 RK3566 Quartz64-B Board
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1:      Manjaro ARM
Retrieving file: /initramfs-linux.img
Retrieving file: /Image
append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=d6cd730s
Retrieving file: /dtbs/rockchip/rk3566-quartz64-b.dtb
** Unable to read file /dtbs/rockchip/rk3566-quartz64-b.dtb **
Skipping Manjaro ARM for failure retrieving FDT
SCRIPT FAILED: continuing...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk mmc@fe2b0000.blk...
Card did not respond to voltage select! : -110
Scanning disk mmc@fe2c0000.blk...
Disk mmc@fe2c0000.blk not ready
Card did not respond to voltage select! : -110
Scanning disk mmc@fe310000.blk...
Disk mmc@fe310000.blk not ready
Found 3 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
Card did not respond to voltage select! : -110
starting USB...
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd840000: USB OHCI 1.0
scanning bus usb@fd800000 for devices... 1 USB Device(s) found
scanning bus usb@fd840000 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
No ethernet found.
missing environment variable: pxeuuid
Retrieving file: /extlinux/pxelinux.cfg/00000000
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/0000000
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/000000
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/00000
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/0000
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/000
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/00
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/0
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/default-arm-rk3568-quartz64-b-rk3566
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/default-arm-rk3568
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/default-arm
No ethernet found.
Retrieving file: /extlinux/pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
=>