UT-100C dmesg output

[  110.891966] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[  111.026435] usb 1-1.2: New USB device found, idVendor=048d, idProduct=9507
[  111.026449] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.026458] usb 1-1.2: Product: DTV Modulator
[  111.026466] usb 1-1.2: Manufacturer: GKB
[  111.026474] usb 1-1.2: SerialNumber: UT100CV4201504240422
[  111.027496] *** it950x usb device pluged in ***
[  111.027504] - Enter Device_init Function -
[  111.027509]         DRIVER_RELEASE_VERSION  : v16.11.10.1
[  111.027516]         EAGLE_FW_RELEASE_LINK_VERSION: 255.39.2.0
[  111.027523]         EAGLE_FW_RELEASE_OFDM_VERSION: 255.9.11.0
[  111.027529]         FW_RELEASE_LINK_VERSION: 0.0.255.1
[  111.027535]         FW_RELEASE_OFDM_VERSION: 0.0.255.1
[  111.027542]         FW_V2_RELEASE_LINK_VERSION: 3.40.1.0
[  111.027549]         FW_V2_RELEASE_OFDM_VERSION: 3.32.1.0
[  111.027555]         FW_V2I_RELEASE_LINK_VERSION: 3.46.6.3
[  111.027561]         FW_V2I_RELEASE_OFDM_VERSION: 3.47.6.3
[  111.027568]         API_TX_RELEASE_VERSION  : 103.20160929.0
[  111.027574]         API_RX_RELEASE_VERSION  : 203.20130405.0
[  111.027579] USB mode= 0x200
[  111.027960] - Enter DRV_GetEEPROMConfig Function -
[  111.029168] Chip Version is 1---and Read 4979---valid bit = 0x01
[  111.029181] =============Need read eeprom
[  111.029578] EEPROM_IRMODE = 0x00,
[  111.029590] bIrTblDownload OFF
[  111.029600] bRAWIr OFF
[  111.029606] IT950x HID (keyboard) mode
[  111.029616] SelectiveSuspend = OFF
[  111.030022] EEPROM_TSMODE = 0x00
[  111.030028] TSMode = TS1 mode
[  111.030818] EEPROM susped mode=1
[  111.031181] - Enter DRV_Initialize Function -
[  111.032027] EagleUser_getDeviceType
               	- Device Type: 11 load from EEPROM
[  111.065255] RX SlaveII address: 3A
[  111.065267] - IT9507_setSlaveIICAddress:3A ok -
[  111.066025]     StreamType_DVBT_DATAGRAM
[  111.228157]     Device initialize TX Ok
[  111.251953]     Device RX no initialized
[  111.252248]     FwVer OFDM = 0x0,
[  111.252630] FwVer LINK = 0xff270200
[  111.252637] 	Device_init success
[  111.252968] AirHD Reg Write ok!
[  111.253802] - SetDCCalibrationTable no setted -
[  111.253807] 	 no eeprom or DC value is invalid
[  111.254099] tx minor 223
[  111.254187] - Enter DL_ApPwCtrl Function -
[  111.254194]   chip =  1  bOn = OFF
[  111.254199] - Enter DL_ApPwCtrl Function -
[  111.254205]   chip =  0  bOn = OFF
[  111.371960] IT950x Power OFF
[  111.374205] USB ITEtech device now attached to USBSkel-223