Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- fugalh@falcon:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.31-17-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 (Ubuntu 2.6.31-17.54-generic)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
- [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.2 present.
- [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-protect
- [ 0.000000] F0000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask FC0000000 write-back
- [ 0.000000] 1 base 040000000 mask FE0000000 write-back
- [ 0.000000] 2 base 0E0000000 mask FFC000000 write-combining
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 base 0E0000000 mask FFC000000 write-combining
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable)
- [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000005fff0000 (usable)
- [ 0.000000] modified: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
- [ 0.000000] modified: 000000005fff3000 - 0000000060000000 (ACPI data)
- [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
- [ 0.000000] RAMDISK: 377ee000 - 37feff73
- [ 0.000000] Allocated new RAMDISK: 008ad000 - 010aef73
- [ 0.000000] Move RAMDISK from 00000000377ee000 - 0000000037feff72 to 008ad000 - 010aef72
- [ 0.000000] ACPI: RSDP 000f7070 00014 (v00 VIA694)
- [ 0.000000] ACPI: RSDT 5fff3000 00028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: FACP 5fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
- [ 0.000000] ACPI: DSDT 5fff30c0 03E02 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
- [ 0.000000] ACPI: FACS 5fff0000 00040
- [ 0.000000] 647MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00011000 - 00017f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
- [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
- [ 0.000000] #5 [00008a9000 - 00008ac09a] BRK ==> [00008a9000 - 00008ac09a]
- [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- [ 0.000000] #7 [00008ad000 - 00010aef73] NEW RAMDISK ==> [00008ad000 - 00010aef73]
- [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0005fff0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x000000a0
- [ 0.000000] 0: 0x00000100 -> 0x0005fff0
- [ 0.000000] On node 0 totalpages: 393088
- [ 0.000000] free_area_init_node: node 0, pgdat c0784960, node_mem_map c10af200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3952 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 1296 pages used for memmap
- [ 0.000000] HighMem zone: 164578 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] Found and enabled local APIC!
- [ 0.000000] nr_irqs_gsi: 16
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages at c1cb6000, static data 35612 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390016
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=a74effdd-351d-47a3-bb1c-c5c16a238e03 ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 7863680 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0005fff0)
- [ 0.000000] Memory: 1534488k/1572800k available (4566k kernel code, 36936k reserved, 2142k data, 540k init, 663496k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
- [ 0.000000] .data : 0xc0575a64 - 0xc078d408 (2142 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0575a64 (4566 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:2304 nr_irqs:256
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1668.484 MHz processor.
- [ 0.002260] Console: colour VGA+ 80x25
- [ 0.002267] console [tty0] enabled
- [ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3336.96 BogoMIPS (lpj=6673936)
- [ 0.004058] Security Framework initialized
- [ 0.004112] AppArmor: AppArmor initialized
- [ 0.004124] Mount-cache hash table entries: 512
- [ 0.004357] Initializing cgroup subsys ns
- [ 0.004365] Initializing cgroup subsys cpuacct
- [ 0.004371] Initializing cgroup subsys memory
- [ 0.004385] Initializing cgroup subsys freezer
- [ 0.004389] Initializing cgroup subsys net_cls
- [ 0.004410] CPU: CLK_CTL MSR was 6003d223. Reprogramming to 2003d223
- [ 0.004415] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.004419] CPU: L2 Cache: 256K (64 bytes/line)
- [ 0.004426] mce: CPU supports 4 MCE banks
- [ 0.004456] Performance Counters: AMD PMU driver.
- [ 0.004466] ... version: 0
- [ 0.004469] ... bit width: 48
- [ 0.004471] ... generic counters: 4
- [ 0.004474] ... value mask: 0000ffffffffffff
- [ 0.004477] ... max period: 00007fffffffffff
- [ 0.004480] ... fixed-purpose counters: 0
- [ 0.004482] ... counter mask: 000000000000000f
- [ 0.004489] Checking 'hlt' instruction... OK.
- [ 0.020696] SMP alternatives: switching to UP code
- [ 0.028037] Freeing SMP alternatives: 19k freed
- [ 0.028086] ACPI: Core revision 20090521
- [ 0.035958] ACPI: setting ELCR to 0200 (from 1a20)
- [ 0.036994] weird, boot CPU (#0) not listed by the BIOS.
- [ 0.036998] SMP motherboard not detected.
- [ 0.040001] SMP disabled
- [ 0.040001] Brought up 1 CPUs
- [ 0.040001] Total of 1 processors activated (3336.96 BogoMIPS).
- [ 0.040001] CPU0 attaching NULL sched-domain.
- [ 0.040001] Booting paravirtualized kernel on bare hardware
- [ 0.040001] regulator: core version 0.5
- [ 0.040001] Time: 19:15:05 Date: 02/06/10
- [ 0.040001] NET: Registered protocol family 16
- [ 0.040001] EISA bus registered
- [ 0.040001] ACPI: bus type pci registered
- [ 0.045179] PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=1
- [ 0.045183] PCI: Using configuration type 1 for base access
- [ 0.046519] bio: create slab <bio-0> at 0
- [ 0.047160] ACPI: EC: Look up EC in DSDT
- [ 0.053327] ACPI: Interpreter enabled
- [ 0.053334] ACPI: (supports S0 S1 S4 S5)
- [ 0.053365] ACPI: Using PIC for interrupt routing
- [ 0.058557] ACPI: No dock devices found.
- [ 0.058688] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.058763] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
- [ 0.058858] pci 0000:00:01.0: supports D1
- [ 0.058892] pci 0000:00:0a.0: reg 10 io port: [0xd000-0xd03f]
- [ 0.058918] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x00ffff]
- [ 0.058956] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe4000000-0xe7ffffff]
- [ 0.059029] pci 0000:00:0c.0: reg 10 io port: [0xd400-0xd47f]
- [ 0.059041] pci 0000:00:0c.0: reg 18 io port: [0xd800-0xd8ff]
- [ 0.059049] pci 0000:00:0c.0: reg 1c 32bit mmio: [0xeb030000-0xeb030fff]
- [ 0.059057] pci 0000:00:0c.0: reg 20 32bit mmio: [0xeb000000-0xeb01ffff]
- [ 0.059069] pci 0000:00:0c.0: reg 30 32bit mmio: [0x000000-0x007fff]
- [ 0.059087] pci 0000:00:0c.0: supports D1
- [ 0.059122] pci 0000:00:0e.0: reg 10 io port: [0xdc00-0xdcff]
- [ 0.059164] pci 0000:00:0e.0: supports D1 D2
- [ 0.059216] pci 0000:00:10.0: reg 20 io port: [0xe000-0xe01f]
- [ 0.059241] pci 0000:00:10.0: supports D1 D2
- [ 0.059245] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.059251] pci 0000:00:10.0: PME# disabled
- [ 0.059299] pci 0000:00:10.1: reg 20 io port: [0xe400-0xe41f]
- [ 0.059324] pci 0000:00:10.1: supports D1 D2
- [ 0.059327] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.059332] pci 0000:00:10.1: PME# disabled
- [ 0.059380] pci 0000:00:10.2: reg 20 io port: [0xe800-0xe81f]
- [ 0.059405] pci 0000:00:10.2: supports D1 D2
- [ 0.059408] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.059413] pci 0000:00:10.2: PME# disabled
- [ 0.059446] pci 0000:00:10.3: reg 10 32bit mmio: [0xeb031000-0xeb0310ff]
- [ 0.059486] pci 0000:00:10.3: supports D1 D2
- [ 0.059489] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.059494] pci 0000:00:10.3: PME# disabled
- [ 0.059557] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.059566] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM
- [ 0.059571] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB
- [ 0.059635] pci 0000:00:11.1: reg 20 io port: [0xec00-0xec0f]
- [ 0.059722] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff]
- [ 0.059730] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff]
- [ 0.059737] pci 0000:01:00.0: reg 18 32bit mmio: [0xe9000000-0xe9ffffff]
- [ 0.059752] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
- [ 0.059803] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xeaffffff]
- [ 0.059809] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.059818] pci_bus 0000:00: on NUMA node 0
- [ 0.059824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.082020] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
- [ 0.082231] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
- [ 0.082441] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- [ 0.082651] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- [ 0.082854] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
- [ 0.083050] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
- [ 0.083274] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
- [ 0.083470] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
- [ 0.083779] SCSI subsystem initialized
- [ 0.083932] libata version 3.00 loaded.
- [ 0.084076] usbcore: registered new interface driver usbfs
- [ 0.084100] usbcore: registered new interface driver hub
- [ 0.084143] usbcore: registered new device driver usb
- [ 0.084336] ACPI: WMI: Mapper loaded
- [ 0.084340] PCI: Using ACPI for IRQ routing
- [ 0.084550] Bluetooth: Core ver 2.15
- [ 0.084605] NET: Registered protocol family 31
- [ 0.084608] Bluetooth: HCI device and connection manager initialized
- [ 0.084613] Bluetooth: HCI socket layer initialized
- [ 0.084616] NetLabel: Initializing
- [ 0.084619] NetLabel: domain hash size = 128
- [ 0.084621] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.084645] NetLabel: unlabeled traffic allowed by default
- [ 0.087975] pnp: PnP ACPI init
- [ 0.088057] ACPI: bus type pnp registered
- [ 0.092787] pnp: PnP ACPI: found 14 devices
- [ 0.092791] ACPI: ACPI bus type pnp unregistered
- [ 0.092796] PnPBIOS: Disabled by ACPI PNP
- [ 0.092814] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
- [ 0.092819] system 00:00: iomem range 0xdd000-0xdffff has been reserved
- [ 0.092824] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
- [ 0.092828] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
- [ 0.092833] system 00:00: iomem range 0x5fff0000-0x5fffffff could not be reserved
- [ 0.092838] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
- [ 0.092842] system 00:00: iomem range 0x0-0x9ffff could not be reserved
- [ 0.092847] system 00:00: iomem range 0x100000-0x5ffeffff could not be reserved
- [ 0.092852] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
- [ 0.092856] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.092861] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
- [ 0.092871] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.092876] system 00:02: ioport range 0x294-0x297 has been reserved
- [ 0.127618] AppArmor: AppArmor Filesystem Enabled
- [ 0.127648] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.127652] pci 0000:00:01.0: IO window: disabled
- [ 0.127660] pci 0000:00:01.0: MEM window: 0xe8000000-0xeaffffff
- [ 0.127665] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff
- [ 0.127683] pci 0000:00:01.0: setting latency timer to 64
- [ 0.127691] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.127695] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.127700] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xeaffffff]
- [ 0.127704] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.127764] NET: Registered protocol family 2
- [ 0.127902] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.128506] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.130637] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.131771] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.131776] TCP reno registered
- [ 0.131966] NET: Registered protocol family 1
- [ 0.132112] Trying to unpack rootfs image as initramfs...
- [ 0.441443] Freeing initrd memory: 8199k freed
- [ 0.457425] cpufreq-nforce2: No nForce2 chipset.
- [ 0.457463] Scanning for low memory corruption every 60 seconds
- [ 0.457654] audit: initializing netlink socket (disabled)
- [ 0.457686] type=2000 audit(1265483705.456:1): initialized
- [ 0.468843] highmem bounce pool size: 64 pages
- [ 0.468857] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.470899] VFS: Disk quotas dquot_6.5.2
- [ 0.470982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.471745] fuse init (API version 7.12)
- [ 0.471857] msgmni has been set to 1719
- [ 0.472230] alg: No test for stdrng (krng)
- [ 0.472250] io scheduler noop registered
- [ 0.472254] io scheduler anticipatory registered
- [ 0.472257] io scheduler deadline registered
- [ 0.472317] io scheduler cfq registered (default)
- [ 0.472338] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- [ 0.472426] pci 0000:01:00.0: Boot video device
- [ 0.472539] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.472572] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.472767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 0.472775] ACPI: Power Button [PWRF]
- [ 0.472852] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 0.472857] ACPI: Power Button [PWRB]
- [ 0.472928] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
- [ 0.472936] ACPI: Sleep Button [SLPB]
- [ 0.472999] fan PNP0C0B:00: registered as cooling_device0
- [ 0.473006] ACPI: Fan [FAN] (on)
- [ 0.473300] Marking TSC unstable due to TSC halts in idle
- [ 0.473334] ACPI: CPU0 (power states: C1[C1] C2[C2])
- [ 0.473357] processor LNXCPU:00: registered as cooling_device1
- [ 0.473362] ACPI: Processor [CPU0] (supports 2 throttling states)
- [ 0.476069] thermal LNXTHERM:01: registered as thermal_zone0
- [ 0.476069] ACPI: Thermal Zone [THRM] (55 C)
- [ 0.476069] isapnp: Scanning for PnP cards...
- [ 0.477368] Switched to high resolution mode on CPU 0
- [ 0.829863] isapnp: No Plug & Play device found
- [ 0.831390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.831518] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.831605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.831917] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.832058] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.833482] brd: module loaded
- [ 0.834126] loop: module loaded
- [ 0.834264] input: Macintosh mouse button emulation as /devices/virtual/input/input3
- [ 0.834450] sata_promise 0000:00:0c.0: version 2.12
- [ 0.835044] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
- [ 0.835049] PCI: setting IRQ 11 as level-triggered
- [ 0.835057] sata_promise 0000:00:0c.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- [ 0.835397] scsi0 : sata_promise
- [ 0.835568] scsi1 : sata_promise
- [ 0.835645] scsi2 : sata_promise
- [ 0.835691] ata1: SATA max UDMA/133 mmio m4096@0xeb030000 ata 0xeb030200 irq 11
- [ 0.835696] ata2: SATA max UDMA/133 mmio m4096@0xeb030000 ata 0xeb030280 irq 11
- [ 0.835701] ata3: PATA max UDMA/133 mmio m4096@0xeb030000 ata 0xeb030300 irq 11
- [ 0.836351] pata_via 0000:00:11.1: version 0.3.4
- [ 0.836807] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
- [ 0.836812] PCI: setting IRQ 5 as level-triggered
- [ 0.836820] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
- [ 0.836826] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 5
- [ 0.837302] scsi3 : pata_via
- [ 0.837427] scsi4 : pata_via
- [ 0.840186] ata4: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14
- [ 0.840192] ata5: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15
- [ 0.840744] Fixed MDIO Bus: probed
- [ 0.840797] PPP generic driver version 2.4.2
- [ 0.840991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.841028] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- [ 0.841058] ehci_hcd 0000:00:10.3: EHCI Host Controller
- [ 0.841167] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
- [ 0.841248] ehci_hcd 0000:00:10.3: irq 11, io mem 0xeb031000
- [ 0.852012] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
- [ 0.852172] usb usb1: configuration #1 chosen from 1 choice
- [ 0.852218] hub 1-0:1.0: USB hub found
- [ 0.852237] hub 1-0:1.0: 6 ports detected
- [ 0.852335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.852370] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.852464] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
- [ 0.852478] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 0.852530] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
- [ 0.852559] uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e000
- [ 0.852678] usb usb2: configuration #1 chosen from 1 choice
- [ 0.852733] hub 2-0:1.0: USB hub found
- [ 0.852748] hub 2-0:1.0: 2 ports detected
- [ 0.853424] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
- [ 0.853428] PCI: setting IRQ 12 as level-triggered
- [ 0.853436] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
- [ 0.853444] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 0.853492] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
- [ 0.853518] uhci_hcd 0000:00:10.1: irq 12, io base 0x0000e400
- [ 0.853632] usb usb3: configuration #1 chosen from 1 choice
- [ 0.853677] hub 3-0:1.0: USB hub found
- [ 0.853692] hub 3-0:1.0: 2 ports detected
- [ 0.854273] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
- [ 0.854278] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
- [ 0.854287] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 0.854333] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
- [ 0.854358] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e800
- [ 0.854496] usb usb4: configuration #1 chosen from 1 choice
- [ 0.854533] hub 4-0:1.0: USB hub found
- [ 0.854547] hub 4-0:1.0: 2 ports detected
- [ 0.854691] PNP: No PS/2 controller found. Probing ports directly.
- [ 1.104090] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.104198] mice: PS/2 mouse device common for all mice
- [ 1.104391] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 1.104418] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 1.104571] device-mapper: uevent: version 1.0.3
- [ 1.104732] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 1.104864] device-mapper: multipath: version 1.1.0 loaded
- [ 1.104868] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.105087] EISA: Probing bus 0 at eisa.0
- [ 1.105108] Cannot allocate resource for EISA slot 4
- [ 1.105111] Cannot allocate resource for EISA slot 5
- [ 1.105125] EISA: Detected 0 cards.
- [ 1.105245] cpuidle: using governor ladder
- [ 1.105306] cpuidle: using governor menu
- [ 1.106025] TCP cubic registered
- [ 1.106229] NET: Registered protocol family 10
- [ 1.106852] lo: Disabled Privacy Extensions
- [ 1.107291] NET: Registered protocol family 17
- [ 1.107328] Bluetooth: L2CAP ver 2.13
- [ 1.107330] Bluetooth: L2CAP socket layer initialized
- [ 1.107335] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.107338] Bluetooth: SCO socket layer initialized
- [ 1.107417] Bluetooth: RFCOMM TTY layer initialized
- [ 1.107422] Bluetooth: RFCOMM socket layer initialized
- [ 1.107425] Bluetooth: RFCOMM ver 1.11
- [ 1.107453] powernow-k8: Processor cpuid 681 not supported
- [ 1.107493] Using IPI No-Shortcut mode
- [ 1.107618] PM: Resume from disk failed.
- [ 1.107651] registered taskstats version 1
- [ 1.107799] Magic number: 14:160:293
- [ 1.107862] tty tty26: hash matches
- [ 1.107963] rtc_cmos 00:04: setting system clock to 2010-02-06 19:15:06 UTC (1265483706)
- [ 1.107968] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.107971] EDD information not available.
- [ 1.156059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.204247] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
- [ 1.204252] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32)
- [ 1.279231] ata1.00: configured for UDMA/133
- [ 1.279452] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
- [ 1.279456] ata1: hotplug_status 0x11
- [ 1.279469] ata1: hard resetting link
- [ 1.404032] usb 2-1: new low speed USB device using uhci_hcd and address 2
- [ 1.581588] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.824039] usb 2-2: new low speed USB device using uhci_hcd and address 3
- [ 2.000053] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.001463] usb 2-2: configuration #1 chosen from 1 choice
- [ 2.103893] ata1.00: configured for UDMA/133
- [ 2.103900] ata1: EH complete
- [ 2.104095] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
- [ 2.104283] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.104355] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 2.104432] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.104437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.104475] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.104681] sda: sda1 sda2
- [ 2.143926] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.424055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.474576] ata2.00: ATA-7: ST3500630AS, 3.AAE, max UDMA/133
- [ 2.474580] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
- [ 2.541233] ata2.00: configured for UDMA/133
- [ 2.541450] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
- [ 2.541454] ata2: hotplug_status 0x22
- [ 2.541464] ata2: hard resetting link
- [ 3.264051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.365924] ata2.00: configured for UDMA/133
- [ 3.365929] ata2: EH complete
- [ 3.366057] scsi 1:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
- [ 3.366263] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 3.366323] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 3.366397] sd 1:0:0:0: [sdb] Write Protect is off
- [ 3.366402] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 3.366440] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.366650] sdb: sdb1 sdb2
- [ 3.405951] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 3.676212] ata5.01: NODEV after polling detection
- [ 3.684428] ata5.00: ATAPI: CW088D ATAPI CD-R/RW, V110F, max UDMA/33
- [ 3.700307] ata5.00: configured for UDMA/33
- [ 3.701187] scsi 4:0:0:0: CD-ROM CyberDrv CW088D CD-R/RW 110F PQ: 0 ANSI: 5
- [ 3.703326] sr0: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray
- [ 3.703332] Uniform CD-ROM driver Revision: 3.20
- [ 3.703475] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 3.703570] sr 4:0:0:0: Attached scsi generic sg2 type 5
- [ 3.703611] Freeing unused kernel memory: 540k freed
- [ 3.704704] Write protecting the kernel text: 4568k
- [ 3.704748] Write protecting the kernel read-only data: 1836k
- [ 3.938688] 3c59x 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
- [ 3.938698] 3c59x: Donald Becker and others.
- [ 3.938711] 0000:00:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001d000.
- [ 3.967256] Linux agpgart interface v0.103
- [ 4.084163] FDC 0 is a post-1991 82077
- [ 4.200911] usbcore: registered new interface driver hiddev
- [ 4.204158] agpgart: Detected VIA KT266/KY266x/KT333 chipset
- [ 4.218707] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
- [ 4.218842] generic-usb 0003:05AC:0307.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:10.0-1/input0
- [ 4.218985] usbcore: registered new interface driver usbhid
- [ 4.218990] usbhid: v2.6:USB HID core driver
- [ 4.230484] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
- [ 4.293690] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5
- [ 4.293836] logitech 0003:046D:C50C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2/input0
- [ 4.326008] logitech 0003:046D:C50C.0003: fixing up Logitech keyboard report descriptor
- [ 4.327502] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input6
- [ 4.327761] logitech 0003:046D:C50C.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2/input1
- [ 5.713707] md: linear personality registered for level -1
- [ 5.718591] md: multipath personality registered for level -4
- [ 5.728160] md: raid0 personality registered for level 0
- [ 5.756058] md: raid1 personality registered for level 1
- [ 5.765835] xor: automatically using best checksumming function: pIII_sse
- [ 5.784008] pIII_sse : 3651.000 MB/sec
- [ 5.784011] xor: using function: pIII_sse (3651.000 MB/sec)
- [ 5.785312] async_tx: api initialized (async)
- [ 5.856090] raid6: int32x1 654 MB/s
- [ 5.924026] raid6: int32x2 636 MB/s
- [ 5.992066] raid6: int32x4 459 MB/s
- [ 6.060027] raid6: int32x8 431 MB/s
- [ 6.128023] raid6: mmxx1 1349 MB/s
- [ 6.196007] raid6: mmxx2 2255 MB/s
- [ 6.264026] raid6: sse1x1 1252 MB/s
- [ 6.332030] raid6: sse1x2 2012 MB/s
- [ 6.332034] raid6: using algorithm sse1x2 (2012 MB/s)
- [ 6.338676] md: raid6 personality registered for level 6
- [ 6.338683] md: raid5 personality registered for level 5
- [ 6.338686] md: raid4 personality registered for level 4
- [ 6.351703] md: raid10 personality registered for level 10
- [ 6.547581] EXT4-fs (sda1): barriers enabled
- [ 6.559385] kjournald2 starting: pid 414, dev sda1:8, commit interval 5 seconds
- [ 6.559408] EXT4-fs (sda1): delayed allocation enabled
- [ 6.559414] EXT4-fs: file extents enabled
- [ 6.560654] EXT4-fs: mballoc enabled
- [ 6.560678] EXT4-fs (sda1): mounted filesystem with ordered data mode
- [ 7.104583] type=1505 audit(1265483712.496:2): operation="profile_load" pid=437 name=/sbin/dhclient3
- [ 7.104989] type=1505 audit(1265483712.496:3): operation="profile_load" pid=437 name=/usr/lib/NetworkManager/nm-dhcp-client.action
- [ 7.105221] type=1505 audit(1265483712.496:4): operation="profile_load" pid=437 name=/usr/lib/connman/scripts/dhclient-script
- [ 7.146844] type=1505 audit(1265483712.536:5): operation="profile_load" pid=438 name=/usr/bin/evince
- [ 7.154849] type=1505 audit(1265483712.544:6): operation="profile_load" pid=438 name=/usr/bin/evince-previewer
- [ 7.159801] type=1505 audit(1265483712.548:7): operation="profile_load" pid=438 name=/usr/bin/evince-thumbnailer
- [ 7.178079] type=1505 audit(1265483712.568:8): operation="profile_load" pid=440 name=/usr/sbin/mysqld
- [ 7.181667] type=1505 audit(1265483712.572:9): operation="profile_load" pid=441 name=/usr/sbin/ntpd
- [ 7.185066] type=1505 audit(1265483712.576:10): operation="profile_load" pid=442 name=/usr/sbin/tcpdump
- [ 7.875690] EXT4-fs (sda1): internal journal on sda1:8
- [ 8.576855] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- [ 8.577578] SGI XFS Quota Management subsystem
- [ 8.600386] XFS mounting filesystem dm-1
- [ 8.792982] udev: starting version 147
- [ 8.825672] Ending clean XFS mount for filesystem: dm-1
- [ 9.287165] udev: renamed network interface eth0 to eth1
- [ 9.442105] parport_pc 00:0a: reported by Plug and Play ACPI
- [ 9.442156] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 9.498892] ppdev: user-space parallel port driver
- [ 9.508471] EXT4-fs (dm-2): barriers enabled
- [ 9.521675] kjournald2 starting: pid 712, dev dm-2:8, commit interval 5 seconds
- [ 9.522008] EXT4-fs (dm-2): internal journal on dm-2:8
- [ 9.522014] EXT4-fs (dm-2): delayed allocation enabled
- [ 9.522019] EXT4-fs: file extents enabled
- [ 9.543542] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 9.592127] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 994kHz
- [ 9.629909] EXT4-fs: mballoc enabled
- [ 9.629945] EXT4-fs (dm-2): mounted filesystem with ordered data mode
- [ 9.644726] Linux video capture interface: v2.00
- [ 9.683289] lp0: using parport0 (interrupt-driven).
- [ 10.166783] nvidia: module license 'NVIDIA' taints kernel.
- [ 10.166794] Disabling lock debugging due to kernel taint
- [ 10.447319] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
- [ 10.447976] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
- [ 10.643645] irda_init()
- [ 10.643672] NET: Registered protocol family 23
- [ 10.705122] ivtv: Start initialization, version 1.4.1
- [ 10.705340] ivtv0: Initializing card 0
- [ 10.705347] ivtv0: Autodetected Hauppauge card (cx23416 based)
- [ 10.705464] ivtv 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
- [ 10.705478] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
- [ 10.762161] tveeprom 0-0050: Hauppauge model 26552, rev F1A3, serial# 10302173
- [ 10.762168] tveeprom 0-0050: tuner model is TCL MFNM05-4 (idx 103, type 43)
- [ 10.762173] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
- [ 10.762178] tveeprom 0-0050: audio processor is CX25843 (idx 37)
- [ 10.762182] tveeprom 0-0050: decoder processor is CX25843 (idx 30)
- [ 10.762185] tveeprom 0-0050: has radio
- [ 10.762190] ivtv0: Autodetected Hauppauge WinTV PVR-150
- [ 11.081048] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
- [ 11.441881] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.658019] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
- [ 11.863937] tda9887 0-0043: creating new instance
- [ 11.863943] tda9887 0-0043: tda988[5/6/7] found
- [ 11.869425] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
- [ 11.906197] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
- [ 11.947898] tuner-simple 0-0061: creating new instance
- [ 11.947907] tuner-simple 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
- [ 11.949866] IRQ 11/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
- [ 11.950386] ivtv0: Registered device video0 for encoder MPG (4096 kB)
- [ 11.950416] ivtv0: Registered device video32 for encoder YUV (2048 kB)
- [ 11.950446] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
- [ 11.950484] ivtv0: Registered device video24 for encoder PCM (320 kB)
- [ 11.950512] ivtv0: Registered device radio0 for encoder radio
- [ 11.950516] ivtv0: Initialized card: Hauppauge WinTV PVR-150
- [ 11.950556] ivtv: End initialization
- [ 11.954114] C-Media PCI 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
- [ 12.466557] eth1: setting full-duplex.
- [ 12.628122] ivtv 0000:00:0b.0: firmware: requesting v4l-cx2341x-enc.fw
- [ 12.989321] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
- [ 13.188822] ivtv0: Encoder revision: 0x02060039
- [ 13.224410] cx25840 0-0044: firmware: requesting v4l-cx25840.fw
- [ 14.173281] type=1505 audit(1265483719.564:11): operation="profile_replace" pid=1046 name=/sbin/dhclient3
- [ 14.173690] type=1505 audit(1265483719.564:12): operation="profile_replace" pid=1046 name=/usr/lib/NetworkManager/nm-dhcp-client.action
- [ 14.173926] type=1505 audit(1265483719.564:13): operation="profile_replace" pid=1046 name=/usr/lib/connman/scripts/dhclient-script
- [ 14.241882] type=1505 audit(1265483719.632:14): operation="profile_replace" pid=1047 name=/usr/bin/evince
- [ 14.266212] type=1505 audit(1265483719.656:15): operation="profile_replace" pid=1047 name=/usr/bin/evince-previewer
- [ 14.315256] type=1505 audit(1265483719.704:16): operation="profile_replace" pid=1047 name=/usr/bin/evince-thumbnailer
- [ 14.354914] type=1505 audit(1265483719.744:17): operation="profile_replace" pid=1049 name=/usr/sbin/mysqld
- [ 14.367835] type=1505 audit(1265483719.756:18): operation="profile_replace" pid=1050 name=/usr/sbin/ntpd
- [ 14.401468] type=1505 audit(1265483719.792:19): operation="profile_replace" pid=1052 name=/usr/sbin/tcpdump
- [ 17.699383] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
- [ 19.476437] type=1503 audit(1265483724.868:20): operation="open" pid=1431 parent=1430 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [ 20.107442] type=1503 audit(1265483725.496:21): operation="open" pid=1469 parent=1468 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [ 20.492672] type=1503 audit(1265483725.884:22): operation="open" pid=1588 parent=1476 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [ 21.166331] type=1503 audit(1265483726.556:23): operation="open" pid=1635 parent=1634 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [ 22.204131] type=1503 audit(1265483727.596:24): operation="open" pid=1650 parent=1649 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [ 22.628014] eth1: no IPv6 routers present
- [ 23.500227] type=1503 audit(1265483728.892:25): operation="open" pid=1666 parent=1665 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [ 23.554727] type=1503 audit(1265483728.944:26): operation="open" pid=1677 parent=1676 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
- [10092.665255] spurious 8259A interrupt: IRQ7.
Add Comment
Please, Sign In to add comment