Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
- [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
- [ 0.000000] [0: swapper: 0] Linux version 3.0.101-cyanogenmod-gdfb2166 (nospamdan@Mint17Build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 29 18:17:20 EDT 2015
- [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- [ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
- [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
- [ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
- [ 0.000000] [0: swapper: 0] memory pool 3 (start 78f00000 size 7100000) initialized
- [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
- [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
- [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
- [ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c1d05000 (42105000 physical) for fb
- [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c2957000 s9888 r8192 d14688 u32768
- [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209160
- [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache androidboot.selinux=permissive sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=dd0a632e androidboot.baseband=csfb
- [ 0.000000] [0: swapper: 0] (sec_dbg_setup)
- [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
- [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
- [ 0.000000] hw_rev_setup : HW rev value is intialized first
- [ 0.000000] HW rev value : 0xD
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 43MB 760MB 22MB = 825MB total
- [ 0.000000] Memory: 802432k/802432k available, 159104k reserved, 419840K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc004c000 ( 272 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0b76db0 (10716 kB)
- [ 0.000000] .data : 0xc0c00000 - 0xc0cf2228 ( 969 kB)
- [ 0.000000] .bss : 0xc0cf224c - 0xc13518c8 (6526 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:855
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67655)
- [ 0.150207] pid_max: default: 32768 minimum: 301
- [ 0.150543] Security Framework initialized
- [ 0.150573] SELinux: Initializing.
- [ 0.150817] Mount-cache hash table entries: 512
- [ 0.152160] Initializing cgroup subsys cpuacct
- [ 0.152252] Initializing cgroup subsys freezer
- [ 0.152313] CPU: Testing write buffer coherency: ok
- [ 0.152679] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
- [ 0.185241] CPU1: Booted secondary processor
- [ 0.195129] Brought up 2 CPUs
- [ 0.195129] SMP: Total of 2 processors activated (27.06 BogoMIPS).
- [ 0.210327] print_constraints: dummy:
- [ 0.210449] rdev_init_debugfs: Error-Bad Function Input
- [ 0.210754] NET: Registered protocol family 16
- [ 0.210968] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.213043] (sec_get_lpm_mode) 1a2b3c00
- [ 0.213073] (sec_get_lpm_mode) 0
- [ 0.213073] (sec_debug_init)
- [ 0.213104] (sec_debug_init) reset_reason : 0x1a2b3c00
- [ 0.213104] msm_tsens_early_init: done
- [ 0.213134] msm_rpm_init: RPM firmware 2.0.1115
- [ 0.213928] saw_probe: id=0, name=8901_s0
- [ 0.214385] saw_probe: id=1, name=8901_s1
- [ 0.216003] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
- [ 0.216064] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
- [ 0.216094] rcg_clk_handoff: sdc1_clk rate=48000000
- [ 0.216156] rcg_clk_handoff: dsi_byte_clk rate=1
- [ 0.216217] rcg_clk_handoff: mdp_clk rate=200000000
- [ 0.216308] rcg_clk_handoff: pixel_mdp_clk rate=27400000
- [ 0.218322] Max ACPU freq: 1512000 KHz
- [ 0.223815] CPU0: 23 scaling frequencies supported.
- [ 0.223815] CPU1: 23 scaling frequencies supported.
- [ 0.224334] LTE_switch_init!
- [ 0.224395] LTE_switch_init end!
- [ 0.225860] pm8058_probe: PMIC revision: E3
- [ 0.227172] pm_gpio_probe: OK: base=173, ngpio=40
- [ 0.227386] pm8xxx_mpp_probe: OK: base=213, ngpio=12
- [ 0.228698] pm8901_probe: PMIC REVISION = F4
- [ 0.229156] pm8xxx_mpp_probe: OK: base=225, ngpio=4
- [ 0.243804] ram_console: got buffer at 77800000, size 100000
- [ 0.243957] ram_console: uncorrectable error in header
- [ 0.243957] ram_console: found existing invalid buffer, size 9306084, start 533036
- [ 0.253021] console [ram-1] enabled
- [ 0.254425] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
- [ 0.255035] msm_snddev_init
- [ 0.255554] msm_snddev_init snd_devices_celox - config
- [ 0.265930] [TSP] Power Down S to discharge for unexpected leackage current
- [ 0.266479] [TKEY] tkey_device_init: 8901_lvs2 On
- [ 0.267089] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
- [ 0.267211] brcm_wlan_init: start
- [ 0.267333] brcm_init_wlan_mem: WIFI MEM Allocated
- [ 0.286285] bio: create slab <bio-0> at 0
- [ 0.287780] ION heap vmalloc created
- [ 0.287933] ION heap mm created at 38800000 with size 3600000
- [ 0.288085] ION heap mm_fw created at 38600000 with size 200000
- [ 0.288208] ION heap mfc created at 3be00000 with size 2000
- [ 0.288360] ION heap sf created at 78f00000 with size 4000000
- [ 0.288482] ION heap camera_preview created at 7cf00000 with size 1200000
- [ 0.288665] ION heap wb created at 7e100000 with size 1400000
- [ 0.288757] ION heap qsecom created at 7f500000 with size 600000
- [ 0.288940] ION heap audio created at 7fb00000 with size 4cf000
- [ 0.289215] pmic8058_pwm_probe: OK
- [ 0.289947] SCSI subsystem initialized
- [ 0.290222] usbcore: registered new interface driver usbfs
- [ 0.290344] usbcore: registered new interface driver hub
- [ 0.290618] usbcore: registered new device driver usb
- [ 0.291076] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
- [ 0.291412] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
- [ 0.291656] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
- [ 0.291961] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
- [ 0.292236] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
- [ 0.292541] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
- [ 0.292877] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
- [ 0.293273] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.293853] Bluetooth: Core ver 2.16
- [ 0.293975] NET: Registered protocol family 31
- [ 0.294067] Bluetooth: HCI device and connection manager initialized
- [ 0.294219] Bluetooth: HCI socket layer initialized
- [ 0.294281] Bluetooth: L2CAP socket layer initialized
- [ 0.294586] Bluetooth: SCO socket layer initialized
- [ 0.295135] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.295471] Switching to clocksource gp_timer
- [ 0.314575] msm_thermal_init complete.
- [ 0.314819] NET: Registered protocol family 2
- [ 0.315093] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.315551] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.316406] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
- [ 0.317474] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.317565] TCP reno registered
- [ 0.317718] UDP hash table entries: 256 (order: 1, 12288 bytes)
- [ 0.317810] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- [ 0.318359] NET: Registered protocol family 1
- [ 0.318725] RPC: Registered named UNIX socket transport module.
- [ 0.318847] RPC: Registered udp transport module.
- [ 0.318939] RPC: Registered tcp transport module.
- [ 0.319000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.319366] Trying to unpack rootfs image as initramfs...
- [ 0.361816] Freeing initrd memory: 1032K
- [ 0.362213] PMU: registered new PMU device of type 0
- [ 0.362487] PMU: registered new PMU device of type 1
- [ 0.363006] ETM/ETB intialized.
- [ 0.363220] pil_qdsp6v3 pil_qdsp6v3: using secure boot
- [ 0.363739] pil_modem pil_modem: using secure boot
- [ 0.364044] sdio_al:SDIO-AL SW version 1.30
- [ 0.367034] smd_channel_probe_worker: allocation table not initialized
- [ 0.373168] msm_dsps driver version 3.03.
- [ 0.379089] lpa_if_init: lpa_if_ptr 0xde9e0e00 buf_vir 0xffdf0000 buf_phy 0x5ee90000 buf_zise 65536
- [ 0.379974] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
- [ 0.381591] sec_switch_probe enter sec_switch_probe
- [ 0.382354] charm_modem_probe: Registering charm modem
- [ 0.384613] msm_rpm_log_probe: OK
- [ 0.384826] [BT] bcm4330_bluetooth_init
- [ 0.385314] [BT] bcm4330_bluetooth_probe
- [ 0.385803] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
- [ 0.385894] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
- [ 0.435211] sec_log_save_old: saved old log at 262144@deac0000
- [ 0.439605] sec_getlog_supply_kloginfo: 0xc112a2b8
- [ 0.439849] audit: initializing netlink socket (disabled)
- [ 0.440032] type=2000 audit(0.410:1): initialized
- [ 0.524688] highmem bounce pool size: 64 pages
- [ 0.524932] ashmem: initialized
- [ 0.530792] exFAT: Core Version 1.2.4
- [ 0.530914] exFAT: FS Version 1.2.4
- [ 0.532745] fuse init (API version 7.16)
- [ 0.533508] msgmni has been set to 749
- [ 0.533599] SELinux: Registering netfilter hooks
- [ 0.535552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 0.535797] io scheduler noop registered
- [ 0.535888] io scheduler deadline registered
- [ 0.536041] io scheduler row registered
- [ 0.536193] io scheduler cfq registered (default)
- [ 0.538757] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 0.538848] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 0.543060] ld9040 start lcdc_ld9040_panel_init
- [ 0.543243] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
- [ 0.543395] ld9040 msm_fb_add_device START
- [ 0.543518] setting pdata->panel_info.fb_num to 3. type: 0
- [ 0.543609] msm_fb_add_device: msm_fb_device_alloc failed!
- [ 0.543762] ld9040 msm_fb_add_device end
- [ 0.544250] ld9040 platform_driver_register(&this_driver) is done
- [ 0.544433] ld9040 LDI : EA8868, pixelclock 27400000
- [ 0.544830] setting pdata->panel_info.fb_num to 3. type: 3
- [ 0.547790] mdp4_lcdc_vsync_init: ndx=0
- [ 0.550048] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
- [ 0.550231] is_lpcharging_state: is_lpm_boot:0
- [ 0.550323] pm_runtime: fail to wake up
- [ 0.550506] [kmj] lcdc_LD9040_panel_power:enable:1
- [ 0.551696] ld9040 lcdc_ld9040_panel_on + (0,0,0)
- [ 0.551818] ld9040 : lcdc_config_gpios [1]
- [ 0.551971] ld9040 start spi_init
- [ 0.552062] ld9040 clk : 103, cs : 104, sdi : 106
- [ 0.552154] ld9040 start ld9040_disp_powerup
- [ 0.605804] ld9040 start ld9040_disp_on - HW Rev: 13
- [ 0.736480] ld9040 ld9040_read_lcd_id: a1 3 22
- [ 0.736633] ld9040 lcd EA8868 M3
- [ 0.800079] ld9040 ACL_cutoff_set Percentage : 40!!
- [ 0.801483] ld9040 ea8868_gamma_ctl 18 18
- [ 0.801757] ld9040 lcdc_ld9040_panel_on - (1,1,1)
- [ 0.803253] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 0.803436] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 0.806610] load_565rle_image: Can not open /initlogo.rle
- [ 0.807128] Registered led device: lcd-backlight
- [ 0.807250] mdp4_lcdc_vsync_init: ndx=0
- [ 0.807373] sec_getlog_supply_fbinfo: 0x42105000 480 800 32 2
- [ 0.807556] ld9040 platform_device_register(&this_device) is done
- [ 0.808074] hdmi_msm hdmi_msm.0: probe
- [ 0.808746] hdmi_msm hdmi_msm.1: probe
- [ 0.808868] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
- [ 0.809143] setting pdata->panel_info.fb_num to 1. type: 7
- [ 0.809936] mdp4_dtv_vsync_init: ndx=0
- [ 0.812103] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
- [ 0.812500] mdp4_dtv_vsync_init: ndx=0
- [ 0.812774] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de32d808
- [ 0.812896] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
- [ 0.813079] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- [ 0.813415] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
- [ 0.814514]
- [ 0.814514] msm_vidc_enc: Inside vid_enc_init()
- [ 0.814941]
- [ 0.814941] msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 0.815216] is_lpcharging_state: is_lpm_boot:0
- [ 0.815551] mhl_v2, Board : get_mhl_int_irq, rev:13
- [ 0.815826] create mhl sysfile
- [ 0.816314] input: sii9234_rcp as /devices/virtual/input/input0
- [ 0.817199] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- [ 0.817718] msm_serial_hs module loaded
- [ 0.817901] msm_serial_hsl: detected port #1
- [ 0.818054] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
- [ 0.818389] msm_serial_hsl: detected port #0
- [ 0.818572] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
- [ 0.819030] msm_serial_hsl: driver initialized
- [ 0.820068] msm_rotator_probe: rotator_hw_revision=1
- [ 0.825897] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 0.827331] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 0.828460] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 0.834655] brd: module loaded
- [ 0.837493] loop: module loaded
- [ 0.837921] is_lpcharging_state: is_lpm_boot:0
- [ 0.838165] ak8975 probe start!
- [ 0.839233] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 0.840240] ak8975 probe success!
- [ 0.840393] is_lpcharging_state: is_lpm_boot:0
- [ 0.840515] k3dh probe start!!
- [ 0.840698] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 0.841033] k3dh probe success!!
- [ 0.841308] sec_jack:sec_jack_probe : Registering jack driver
- [ 0.841613] input: sec_jack as /devices/virtual/input/input1
- [ 0.842498] pm8xxx_upl_probe: OK
- [ 0.843505] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
- [ 0.843872] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
- [ 0.844329] THNAK YOU!!
- [ 0.844482] vibrator I2C attach success!!!
- [ 0.844635] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
- [ 0.858123] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
- [ 0.859100] is_lpcharging_state: is_lpm_boot:0
- [ 0.859252] a2220_init
- [ 0.859527] i2c-core: driver [audience_a2220] using legacy suspend method
- [ 0.859710] i2c-core: driver [audience_a2220] using legacy resume method
- [ 0.859954] level device init
- [ 0.865112] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
- [ 0.865295] audience_a2220 :a2220_ioctl: creating thread..
- [ 0.865509] audience_a2220 :a2220_init_thread
- [ 0.875854] init_a2220 -
- [ 0.875946] adie_codec_register_codec_operations: codec type 1
- [ 0.876678] Loading pn544 driver
- [ 0.876831] pn544_probe : IRQ num 628
- [ 0.877044] pn544_probe : requesting IRQ 628
- [ 0.877868] SCSI Media Changer driver v0.25
- [ 0.878356] PPP generic driver version 2.4.2
- [ 0.878601] PPP Deflate Compression module registered
- [ 0.878753] PPP BSD Compression module registered
- [ 0.886230] PPP MPPE Compression module registered
- [ 0.886383] NET: Registered protocol family 24
- [ 0.886474] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 0.886657] CSLIP: code copyright 1989 Regents of the University of California.
- [ 0.887268] tun: Universal TUN/TAP device driver, 1.6
- [ 0.887359] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.888244] smsc911x: Driver version 2008-10-21
- [ 0.888610] usbcore: registered new interface driver asix
- [ 0.888732] usbcore: registered new interface driver cdc_ether
- [ 0.888946] usbcore: registered new interface driver net1080
- [ 0.889099] usbcore: registered new interface driver cdc_subset
- [ 0.889282] usbcore: registered new interface driver zaurus
- [ 0.889404] cdc_ncm: 04-Aug-2011
- [ 0.889587] usbcore: registered new interface driver cdc_ncm
- [ 0.889709] rmnet_init: SMD devices[8]
- [ 0.894042] rmnet_init: SDIO devices[8]
- [ 0.906799] msm_hsusb_smb328a_vbus_power attached 0
- [ 0.908843] msm_otg msm_otg: success to host_notify_dev_register
- [ 0.909210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.909545] host driver registered w/ tranceiver
- [ 0.909912] usbcore: registered new interface driver cdc_acm
- [ 0.910034] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.910247] usbcore: registered new interface driver usblp
- [ 0.910430] Initializing USB Mass Storage driver...
- [ 0.910552] usbcore: registered new interface driver usb-storage
- [ 0.910675] USB Mass Storage support registered.
- [ 0.910858] usbcore: registered new interface driver ums-alauda
- [ 0.911010] usbcore: registered new interface driver ums-cypress
- [ 0.911224] usbcore: registered new interface driver ums-datafab
- [ 0.911346] usbcore: registered new interface driver ums-freecom
- [ 0.911560] usbcore: registered new interface driver ums-isd200
- [ 0.911743] usbcore: registered new interface driver ums-jumpshot
- [ 0.911895] usbcore: registered new interface driver ums-karma
- [ 0.912109] usbcore: registered new interface driver ums-onetouch
- [ 0.912231] usbcore: registered new interface driver ums-sddr09
- [ 0.912445] usbcore: registered new interface driver ums-sddr55
- [ 0.912567] usbcore: registered new interface driver ums-usbat
- [ 0.912780] usbcore: registered new interface driver usb_ehset_test
- [ 0.913146] peripheral driver registered w/ tranceiver
- [ 0.913360] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
- [ 0.915527] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 0.915710] android_usb gadget: Number of LUNs=2
- [ 0.915802] lun0: LUN: removable file: (no medium)
- [ 0.916015] lun1: LUN: removable file: (no medium)
- [ 0.916351] android_usb gadget: android_usb ready
- [ 0.918121] DIAG registered SDIO device
- [ 0.918426] diagchar initialized now
- [ 0.918762] mousedev: PS/2 mouse device common for all mice
- [ 0.920288] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
- [ 0.920898] is_lpcharging_state: is_lpm_boot:0
- [ 0.921081] [TSP] mxt224_probe
- [ 0.921325] input: sec_touchscreen as /devices/virtual/input/input3
- [ 0.921569] mxt224_power_on: enter
- [ 0.922088] [TSP POWER ON L1 3.3 enable
- [ 0.922576] [TSP POWER ON L4 1.8 enable
- [ 0.922729] mxt224_power_on: exit
- [ 0.975891] mxt224_power_on is finished
- [ 0.977508] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
- [ 1.017211] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
- [ 1.017395] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
- [ 1.036010] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
- [ 1.036315] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
- [ 1.037506] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
- [ 1.037658] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
- [ 1.037841] a2220_bootup_init: starting to load image (2459 passes)...
- [ 1.041778] [TSP] TSP chip is MXT224-E
- [ 1.042419] [TSP]user_info_value is 0
- [ 1.136016] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
- [ 1.136138] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
- [ 1.136688] msm_otg_suspend: usb in low power mode
- [ 1.136810] [TSP] ta_status is 0
- [ 1.136962] [TSP] mxt224_ta_probe
- [ 1.145599] [TSP]TA_probe MXT224E T48 Byte2 is 114
- [ 1.147857] [TSP]calibration success!!!
- [ 1.148437] [TSP] mxt224_probe e
- [ 1.148925] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
- [ 1.149230] [sweep2wake]: set device pmic8xxx_pwrkey
- [ 1.149566] [TSP] Calibration End!!!!!!
- [ 1.149749] [TSP] Clearing unused slots
- [ 1.151092] using rtc device, pm8xxx_rtc, for alarms
- [ 1.151214] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 1.151824] i2c /dev entries driver
- [ 1.152954] [TSP] Calibration End!!!!!!
- [ 1.153137] [TSP] Clearing unused slots
- [ 1.153320] is_lpcharging_state: is_lpm_boot:0
- [ 1.153442] yda165:yda165_init
- [ 1.153656] yda165:yda165_probe
- [ 1.153747] yda165:yda165_probe
- [ 1.153839] yda165_probe: OK
- [ 1.154052] yda165:load_ampgain completed
- [ 1.154296] is_lpcharging_state: is_lpm_boot:0
- [ 1.154602] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 1.154968] input: proximity_sensor as /devices/virtual/input/input5
- [ 1.155242] opt_i2c_probe(839):
- [ 1.155395] opt_i2c_probe, 840 : start!!!
- [ 1.155517] GP2A opt i2c attach success!!!
- [ 1.155609] GP2A opt i2c attach success!!!
- [ 1.155761] opt_i2c_probe, 859 : end!!!
- [ 1.155914] opt_i2c_client : (0xdea0be00)
- [ 1.156738] opt_i2c_write(497): : 0x4, 0x2
- [ 1.156890] gp2a_opt_probe is OK!!
- [ 1.157531] is_lpcharging_state: is_lpm_boot:0
- [ 1.158508] input: light_sensor as /devices/virtual/input/input6
- [ 1.159210] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
- [ 1.162017] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
- [ 1.162322] i2c-core: driver [fsa9480] using legacy resume method
- [ 1.162445] is_lpcharging_state: is_lpm_boot:0
- [ 1.162658] [GYRO] k3g_probe start!
- [ 1.162780] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- [ 1.163391] input: gyro_sensor as /devices/virtual/input/input8
- [ 1.164672] input: orientation_sensor as /devices/virtual/input/input9
- [ 1.165069] lirc_dev: IR Remote Control driver registered, major 239
- [ 1.165252] IR NEC protocol handler initialized
- [ 1.165344] IR RC5(x) protocol handler initialized
- [ 1.165435] IR RC6 protocol handler initialized
- [ 1.165588] IR JVC protocol handler initialized
- [ 1.165710] IR Sony protocol handler initialized
- [ 1.165863] IR RC5 (streamzap) protocol handler initialized
- [ 1.166015] IR LIRC bridge handler initialized
- [ 1.166107] Linux video capture interface: v2.00
- [ 1.166412] usbcore: registered new interface driver uvcvideo
- [ 1.166503] USB Video Class driver (v1.1.0)
- [ 1.167510] is_lpcharging_state: is_lpm_boot:0
- [ 1.167694] ############# M5MO probe ##############
- [ 1.167968] [M5MO] m5mo_sensor_probe : E
- [ 1.168060] [M5MO] m5mo_i2c_init : E
- [ 1.168212] [M5MO] m5mo_i2c_probe : E
- [ 1.168304] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
- [ 1.168334]
- [ 1.169464] is_lpcharging_state: is_lpm_boot:0
- [ 1.169708] ############# S5K5BAFX probe ##############
- [ 1.170196] [5BAFX] s5k5bafx_sensor_probe : E
- [ 1.170288] [5BAFX] s5k5bafx_i2c_init : E
- [ 1.170501] [5BAFX] s5k5bafx_i2c_probe : E
- [ 1.170593] [5BAFX] s5k5bafx_i2c_probe : X
- [ 1.170806] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
- [ 1.171783] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
- [ 1.172210] max17040_probe: MAX17043 driver Loading!
- [ 1.172363] max17040_get_version :
- [ 1.173278] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
- [ 1.174255] max17040_get_rcomp : current rcomp = 0xc71f(199)
- [ 1.175567] max17040_get_rcomp : current rcomp = 0xc71f(199)
- [ 1.179321] i2c-core: driver [max17040] using legacy suspend method
- [ 1.179473] i2c-core: driver [max17040] using legacy resume method
- [ 1.179687] smb328a_probe: SMB328A driver Loading!
- [ 1.179809] is_lpcharging_state: is_lpm_boot:0
- [ 1.183319] i2c-core: driver [smb328a] using legacy suspend method
- [ 1.183441] i2c-core: driver [smb328a] using legacy resume method
- [ 1.184173] msm_adc successfully registered
- [ 1.185607] Critical temperature reached (0 C), shutting down.
- [ 1.185821] Critical temperature reached (0 C), shutting down.
- [ 1.186126] pm8xxx_init_adc: adc_channel_open() failed.
- [ 1.186279] pm8xxx_tm_probe: Unable to initialize adc
- [ 1.186431] [TSP] Calibration!!!!!!
- [ 1.186462] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
- [ 1.186920] pm8xxx_tm_probe: OK
- [ 1.187652] device-mapper: uevent: version 1.0.3
- [ 1.188049] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 1.188446] Bluetooth: HCI UART driver ver 2.2
- [ 1.188629] Bluetooth: HCI H4 protocol initialized
- [ 1.188720] Bluetooth: HCI_IBS protocol initialized
- [ 1.188812] Bluetooth: BlueSleep Mode Driver Ver 1.1
- [ 1.189636] cpuidle: using governor ladder
- [ 1.189727] cpuidle: using governor menu
- [ 1.190551] mmc0: mci-version: 0
- [ 1.190704] mmc0: No card detect facilities available
- [ 1.191375] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
- [ 1.191589] mmc0: 8 bit data mode enabled
- [ 1.191680] mmc0: 4 bit data mode disabled
- [ 1.191894] mmc0: polling status mode disabled
- [ 1.191986] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.192169] mmc0: Slot eject status = 0
- [ 1.192260] mmc0: Power save feature enable = 1
- [ 1.192382] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d840000
- [ 1.192565] mmc0: DM cmd busaddr 0x5d840000, cmdptr busaddr 0x5d857f40
- [ 1.193298] mmc1: mci-version: 0
- [ 1.194061] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
- [ 1.194244] mmc1: 8 bit data mode enabled
- [ 1.194335] mmc1: 4 bit data mode disabled
- [ 1.194427] mmc1: polling status mode disabled
- [ 1.194641] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.194732] mmc1: Slot eject status = 0
- [ 1.194915] mmc1: Power save feature enable = 1
- [ 1.195007] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d860000
- [ 1.195190] mmc1: DM cmd busaddr 0x5d860000, cmdptr busaddr 0x5d877f40
- [ 1.195861] mmc2: mci-version: 0
- [ 1.196807] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
- [ 1.196990] mmc2: 8 bit data mode disabled
- [ 1.197082] mmc2: 4 bit data mode enabled
- [ 1.197296] mmc2: polling status mode disabled
- [ 1.197387] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.197570] mmc2: Slot eject status = 0
- [ 1.197662] mmc2: Power save feature enable = 1
- [ 1.197784] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d8a0000
- [ 1.197937] mmc2: DM cmd busaddr 0x5d8a0000, cmdptr busaddr 0x5d8b7f40
- [ 1.198638] mmc3: mci-version: 0
- [ 1.198822] mmc3: No card detect facilities available
- [ 1.199432] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
- [ 1.199615] mmc3: 8 bit data mode disabled
- [ 1.199707] mmc3: 4 bit data mode enabled
- [ 1.199920] mmc3: polling status mode disabled
- [ 1.200012] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.200195] mmc3: Slot eject status = 0
- [ 1.200286] mmc3: Power save feature enable = 1
- [ 1.200408] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d8c0000
- [ 1.200561] mmc3: DM cmd busaddr 0x5d8c0000, cmdptr busaddr 0x5d8d7f40
- [ 1.201293] mmc4: mci-version: 0
- [ 1.202056] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
- [ 1.202239] mmc4: 8 bit data mode disabled
- [ 1.202362] mmc4: 4 bit data mode enabled
- [ 1.202453] mmc4: polling status mode disabled
- [ 1.202667] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 1.202758] mmc4: Slot eject status = 0
- [ 1.202941] mmc4: Power save feature enable = 1
- [ 1.203033] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d8e0000
- [ 1.203216] mmc4: DM cmd busaddr 0x5d8e0000, cmdptr busaddr 0x5d8f7f40
- [ 1.204162] Registered led device: camera:flash0
- [ 1.204467] Registered led device: camera:flash1
- [ 1.206665] usbcore: registered new interface driver usbhid
- [ 1.206756] usbhid: USB HID core driver
- [ 1.207366] logger: created 512K log 'log_main'
- [ 1.207550] logger: created 256K log 'log_events'
- [ 1.207794] logger: created 512K log 'log_radio'
- [ 1.208038] logger: created 256K log 'log_system'
- [ 1.208160] sec_getlog_supply_loggerinfo: 0xc11c4ca8 0xc1244ca8 0xc12c4ca8 0xc1304ca8
- [ 1.209564] zram: Created 2 device(s) ...
- [ 1.210083] usbcore: registered new interface driver snd-usb-audio
- [ 1.211517] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
- [ 1.211975] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- [ 1.212402] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
- [ 1.214172] [TSP] Calibration End!!!!!!
- [ 1.214263] [TSP] Clearing unused slots
- [ 1.214324] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- [ 1.215637] ALSA device list:
- [ 1.215728] #0: msm-audio
- [ 1.226806] oprofile: using arm/armv7-scorpionmp
- [ 1.227081] GACT probability NOT on
- [ 1.227172] Mirror/redirect action on
- [ 1.227355] u32 classifier
- [ 1.227447] Actions configured
- [ 1.227539] Netfilter messages via NETLINK v0.30.
- [ 1.227813] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
- [ 1.228424] ctnetlink v0.93: registering with nfnetlink.
- [ 1.228729] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.228851] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.229461] xt_time: kernel timezone is -0000
- [ 1.229827] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.230255] arp_tables: (C) 2002 David S. Miller
- [ 1.235504] TCP cubic registered
- [ 1.235595] Initializing XFRM netlink socket
- [ 1.251556] NET: Registered protocol family 10
- [ 1.278991] Mobile IPv6
- [ 1.279174] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.279449] IPv6 over IPv4 tunneling driver
- [ 1.280578] NET: Registered protocol family 17
- [ 1.280792] NET: Registered protocol family 15
- [ 1.281036] Bluetooth: RFCOMM TTY layer initialized
- [ 1.281158] Bluetooth: RFCOMM socket layer initialized
- [ 1.281341] Bluetooth: RFCOMM ver 1.11
- [ 1.281433] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.281585] Bluetooth: BNEP filters: protocol multicast
- [ 1.281707] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.282073] NET: Registered protocol family 35
- [ 1.282287] Registering the dns_resolver key type
- [ 1.282409] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
- [ 1.282684] Registering SWP/SWPB emulation handler
- [ 1.295074] clock_late_init() disabled 188 unused clocks
- [ 1.299896] MSM Watchdog Initialized
- [ 1.300811] set_dload_mode <0> ( C0016ADC )
- [ 1.301696] [TKEY] touchkey_init START
- [ 1.301788] is_lpcharging_state: is_lpm_boot:0
- [ 1.302673] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd
- [ 1.302917] [TKEY] sec i2c_touchkey_probe
- [ 1.303161] input: sec_touchkey as /devices/virtual/input/input10
- [ 1.303649] [TKEY] enter touchkey_auto_calibration
- [ 1.308685] mmc0: new high speed MMC card at address 0001
- [ 1.309204] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
- [ 1.309417] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
- [ 1.309722] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
- [ 1.314453] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
- [ 1.329559] mmcblk0boot1: unknown partition table
- [ 1.331848] mmcblk0boot0: unknown partition table
- [ 1.349365] [TKEY] after touchkey_auto_calibration result = 1
- [ 1.349609] [TKEY] touchkey_init END
- [ 1.351043] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-09-30 12:35:56 UTC (1443616556)
- [ 1.351348] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- [ 1.351898] sec_bat_get_lpcharging_state: LP charging:0
- [ 1.352966] sec_bat_polling_work: adc work already on a queue
- [ 1.354278] [fg] p:6195, s1:65, s2:100, v:3775000, t:0
- [ 1.355560] Warning: unable to open an initial console.
- [ 1.355895] Freeing init memory: 272K
- [ 1.390655] pmic8058_xoadc:The offset for AMUX calibrationwas -374
- [ 1.424163] SELinux: 2048 avtab hash slots, 8091 rules.
- [ 1.427734] SELinux: 2048 avtab hash slots, 8091 rules.
- [ 1.427856] SELinux: 1 users, 2 roles, 653 types, 0 bools, 1 sens, 1024 cats
- [ 1.428222] SELinux: 86 classes, 8091 rules
- [ 1.429901] SELinux: Completing initialization.
- [ 1.430084] SELinux: Setting up existing superblocks.
- [ 1.430236] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 1.430419] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- [ 1.430633] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- [ 1.430816] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- [ 1.430999] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 1.431152] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- [ 1.440765] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- [ 1.440887] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- [ 1.441070] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- [ 1.441284] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- [ 1.441497] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- [ 1.441741] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 1.441925] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 1.478790] param_sec_operation: filp_open failed. (-2)
- [ 1.478912] sec_open_param PARAM OPEN FAIL
- [ 1.484039] sec_switch_init_work error value = 3
- [ 1.774749] type=1403 audit(1443616556.910:2): policy loaded auid=4294967295 ses=4294967295
- [ 1.786712] gpio_request: gpio-251 (SD_WP_Switch) status -22
- [ 1.786834] msm_sdc3_get_wpswitch:Failed to request GPIO 251
- [ 1.787017] mmc2: host does not support reading read-only switch. assuming write-enable.
- [ 1.789031] mmc2: new high speed SDXC card at address e624
- [ 1.789611] mmcblk1: mmc2:e624 SU64G 59.4 GiB
- [ 1.792877] mmcblk1: p1 p2
- [ 2.066680] sec_bat_get_lpcharging_state: LP charging:0
- [ 2.075744] init: invalid gid 'qcom_oncrpc'
- [ 2.356597] sec_bat_polling_work: adc work already on a queue
- [ 2.476623] type=1400 audit(1443616557.620:3): avc: denied { read } for pid=21 comm="kworker/0:1" name="mmcblk0p12" dev=tmpfs ino=3194 scontext=u:r:kernel:s0 tcontext=u:object_r:mmc_block_device:s0 tclass=blk_file
- [ 2.476898] type=1400 audit(1443616557.620:4): avc: denied { open } for pid=21 comm="kworker/0:1" name="mmcblk0p12" dev=tmpfs ino=3194 scontext=u:r:kernel:s0 tcontext=u:object_r:mmc_block_device:s0 tclass=blk_file
- [ 2.482482] sec_switch_init_work value = 1
- [ 2.482574] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
- [ 2.492767] fsa9480_manual_switching(0)
- [ 2.590087] init: could not open /dev/keychord
- [ 2.616729] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 2.617370] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 2.620025] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 2.620422] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 2.646728] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 2.667205] SELinux: initialized (dev mmcblk0p13, type vfat), uses genfs_contexts
- [ 2.667510] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p13,target=/firmware,type=vfat)=0
- [ 2.836730] sec_jack:sec_jack_det_irq_handler : ready = 1.
- [ 2.836914] sec_jack: ear micbias off
- [ 2.844451] EXT4-fs (mmcblk0p21): recovery complete
- [ 2.849822] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 2.849975] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
- [ 2.850219] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p21,target=/efs,type=ext4)=0
- [ 2.857147] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: errors=panic
- [ 2.857360] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- [ 2.857543] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p24,target=/system,type=ext4)=0
- [ 2.865753] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x60470)
- [ 2.865936] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 1th superblock
- [ 2.866516] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- [ 2.866729] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 2th superblock
- [ 2.866912] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x60470)
- [ 2.867004] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 1th superblock
- [ 2.867187] F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- [ 2.867370] F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 2th superblock
- [ 2.966796] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p25,target=/data,type=f2fs)=-1
- [ 3.518920] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
- [ 3.519470] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
- [ 3.519653] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
- [ 3.547058] a2220_bootup_init: firmware loaded successfully
- [ 3.757446] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
- [ 3.757568] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13
- [ 3.757751] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
- [ 3.758026] audience_a2220 :execute_cmdmsg : ...go to suspend first
- [ 3.758178] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10
- [ 3.887054] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
- [ 3.887176] a2220_bootup_init: initialized!
- [ 3.887329] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
- [ 5.452880] EXT4-fs (mmcblk0p25): ext4_orphan_cleanup: deleting unreferenced inode 362190
- [ 5.453277] EXT4-fs (mmcblk0p25): 1 orphan inode deleted
- [ 5.453399] EXT4-fs (mmcblk0p25): recovery complete
- [ 5.505767] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- [ 5.505981] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- [ 5.506164] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-num/p25,/data,ext4)=0
- [ 5.578094] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-num/p25
- [ 5.668029] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 5.668182] e2fsck: /dev/block/platform/msm_sdcc.1/by-num/p25: clean, 7805/394352 files, 1083506/1574400 blocks
- [ 5.685760] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
- [ 5.685974] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- [ 5.686248] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p25,target=/data,type=ext4)=0
- [ 5.686370] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-num/p25 on /data with fs_type=ext4 instead of f2fs
- [ 5.693237] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x4b90)
- [ 5.693359] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
- [ 5.694030] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- [ 5.694183] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
- [ 5.694305] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x4b90)
- [ 5.694488] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 1th superblock
- [ 5.694671] F2FS-fs (mmcblk0p26): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- [ 5.694763] F2FS-fs (mmcblk0p26): Can't find valid F2FS filesystem in 2th superblock
- [ 5.727172] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p26,target=/cache,type=f2fs)=-1
- [ 5.872314] EXT4-fs (mmcblk0p26): ext4_orphan_cleanup: deleting unreferenced inode 21
- [ 5.872497] EXT4-fs (mmcblk0p26): 1 orphan inode deleted
- [ 5.872650] EXT4-fs (mmcblk0p26): recovery complete
- [ 5.918334] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- [ 5.918548] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
- [ 5.918792] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-num/p26,/cache,ext4)=0
- [ 5.967193] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-num/p26
- [ 5.994079] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 5.994293] e2fsck: /dev/block/platform/msm_sdcc.1/by-num/p26: clean, 18/19344 files, 2483/77312 blocks
- [ 6.008148] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 6.008300] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
- [ 6.008544] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-num/p26,target=/cache,type=ext4)=0
- [ 6.008728] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-num/p26 on /cache with fs_type=ext4 instead of f2fs
- [ 6.887176] msmsdcc_runtime_suspend: Enter WIFI suspend
- [ 7.033386] type=1400 audit(1443616562.164:5): avc: denied { setattr } for pid=1 comm="init" name="mmcblk0p12" dev=tmpfs ino=3194 scontext=u:r:init:s0 tcontext=u:object_r:mmc_block_device:s0 tclass=blk_file
- [ 7.100708] type=1400 audit(1443616562.234:6): avc: denied { read } for pid=141 comm="sh" name="image" dev=mmcblk0p13 ino=2 scontext=u:r:init_shell:s0 tcontext=u:object_r:vfat:s0 tclass=dir
- [ 7.101013] type=1400 audit(1443616562.234:7): avc: denied { open } for pid=141 comm="sh" name="image" dev=mmcblk0p13 ino=2 scontext=u:r:init_shell:s0 tcontext=u:object_r:vfat:s0 tclass=dir
- [ 7.126892] type=1400 audit(1443616562.254:8): avc: denied { getattr } for pid=140 comm="run-parts" path="/system/etc/init.d/90userinit" dev=mmcblk0p24 ino=398 scontext=u:r:sysinit:s0 tcontext=u:object_r:userinit_exec:s0 tclass=file
- [ 7.127288] type=1400 audit(1443616562.264:9): avc: denied { execute } for pid=140 comm="run-parts" name="90userinit" dev=mmcblk0p24 ino=398 scontext=u:r:sysinit:s0 tcontext=u:object_r:userinit_exec:s0 tclass=file
- [ 7.167175] fsa9480 5-0025: fsa9480_init_detect
- [ 7.168273] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
- [ 7.191162] type=1400 audit(1443616562.324:10): avc: denied { getattr } for pid=141 comm="ls" path="/firmware/image/modem.b00" dev=mmcblk0p13 ino=78 scontext=u:r:init_shell:s0 tcontext=u:object_r:vfat:s0 tclass=file
- [ 7.243927] type=1400 audit(1443616562.374:11): avc: denied { read open } for pid=156 comm="run-parts" name="90userinit" dev=mmcblk0p24 ino=398 scontext=u:r:sysinit:s0 tcontext=u:object_r:userinit_exec:s0 tclass=file
- [ 7.244354] type=1400 audit(1443616562.374:12): avc: denied { execute_no_trans } for pid=156 comm="run-parts" path="/system/etc/init.d/90userinit" dev=mmcblk0p24 ino=398 scontext=u:r:sysinit:s0 tcontext=u:object_r:userinit_exec:s0 tclass=file
- [ 7.270690] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
- [ 7.433380] type=1400 audit(1443616562.564:13): avc: denied { mounton } for pid=180 comm="mount" path="/system/etc/firmware/misc_mdm" dev=mmcblk0p24 ino=7665 scontext=u:r:init_shell:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- [ 7.445953] SELinux: initialized (dev mmcblk0p17, type vfat), uses genfs_contexts
- [ 7.446197] type=1400 audit(1443616562.574:14): avc: denied { mount } for pid=180 comm="mount" name="/" dev=mmcblk0p17 ino=1 scontext=u:r:init_shell:s0 tcontext=u:object_r:vfat:s0 tclass=filesystem
- [ 8.014404] logd.auditd: start
- [ 8.435913] pil_qdsp6v3 pil_qdsp6v3: brought out of reset
- [ 8.470001] apr_tal:Q6 Is Up
- [ 8.820800] healthd: wakealarm_init: timerfd_create failed
- [ 8.824218] healthd: battery [l=65 v=3796 t=27.9 h=2 st=3] dock-battery none chg=
- [ 9.813232] pil_modem pil_modem: brought out of reset
- [ 9.813385] smd_tty_open: DS open failed -19
- [ 9.822753] init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
- [ 9.822967] init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
- [ 9.823120] init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
- [ 9.823333] init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
- [ 9.823516] init: property 'ro.model' doesn't exist while expanding '$ro.model'
- [ 9.823699] init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
- [ 9.823852] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- [ 9.824401] mass_storage_vendor_store: vendor SAMSUNG
- [ 9.824645] mass_storage_product_store: product SGH-I727
- [ 9.829162] init: service 'console' requires console
- [ 9.834472] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- [ 9.842468] init: Warning! Service qmiproxy needs a SELinux domain defined; please fix!
- [ 9.843841] init: Warning! Service secril-daemon needs a SELinux domain defined; please fix!
- [ 9.844238] type=1400 audit(1443616564.967:15): avc: denied { execmem } for pid=239 comm="qcks" scontext=u:r:mdm_helper:s0 tcontext=u:r:mdm_helper:s0 tclass=process
- [ 9.844726] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
- [ 9.845458] init: Warning! Service zygote needs a SELinux domain defined; please fix!
- [ 9.846527] android_usb: already disabled
- [ 9.851287] type=1400 audit(1443616564.977:16): avc: denied { getattr } for pid=239 comm="qcks" path="/dev/mdm" dev=tmpfs ino=3324 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:radio_device:s0 tclass=chr_file
- [ 9.867401] type=1400 audit(1443616564.997:17): avc: denied { dac_override } for pid=239 comm="qcks" capability=1 scontext=u:r:mdm_helper:s0 tcontext=u:r:mdm_helper:s0 tclass=capability
- [ 9.867980] type=1400 audit(1443616564.997:18): avc: denied { read } for pid=239 comm="qcks" name="mdm" dev=tmpfs ino=3324 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:radio_device:s0 tclass=chr_file
- [ 9.868438] type=1400 audit(1443616564.997:19): avc: denied { open } for pid=239 comm="qcks" name="mdm" dev=tmpfs ino=3324 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:radio_device:s0 tclass=chr_file
- [ 9.869079] type=1400 audit(1443616564.997:20): avc: denied { ioctl } for pid=239 comm="qcks" path="/dev/mdm" dev=tmpfs ino=3324 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:radio_device:s0 tclass=chr_file
- [ 9.869689] charm_modem_ioctl: Entering ioctl cmd = 1
- [ 9.869812] charm_modem_ioctl: Powering on
- [ 9.879150] usb: enable_store f:mtp
- [ 9.879241] usb: enable_store f:acm
- [ 9.879333] usb: acm is enabled. (bcdDevice=0x400)
- [ 9.879516] usb: enable_store f:adb
- [ 9.880493] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
- [ 9.898193] adb_open
- [ 9.898315] mtp_bind_config
- [ 9.898437] acm_init_port:gport:tty_ports:1 sdio_ports:0 smd_ports:0 nr_ports:1
- [ 9.900360] adb_bind_config
- [ 9.930419] type=1400 audit(1443616565.057:21): avc: denied { getattr } for pid=239 comm="qcks" path="/dev/ttyHSL1" dev=tmpfs ino=3141 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 9.946655] Notify: smsm init
- [ 9.946777] _smem_log_init: no power log or log_idx allocated
- [ 9.982391] rmt_storage (248): /proc/248/oom_adj is deprecated, please use /proc/248/oom_score_adj instead.
- [ 9.983306] type=1400 audit(1443616565.107:22): avc: denied { read write } for pid=248 comm="rmt_storage" name="rmt_storage" dev=tmpfs ino=3325 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 9.991699] type=1400 audit(1443616565.117:23): avc: denied { open } for pid=248 comm="rmt_storage" name="rmt_storage" dev=tmpfs ino=3325 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 9.997314] rpcrouter_smd_remote_notify: smd opened 0x (null)
- [ 10.000610] rmt_storage_get_ramfs: RAMFS entry: addr = 0x46100000, size = 0x00300000
- [ 10.000823] rmt_storage_get_ramfs: RAMFS entry: addr = 0x42e00000, size = 0x00002000
- [ 10.007385] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
- [ 10.018951] rmt_storage_event_open_cb: open callback received
- [ 10.019134] open partition /boot/modem_fs1 handle=1
- [ 10.019683] rmt_storage_event_user_data_cb: send user data callback received
- [ 10.020294] rmt_storage_event_open_cb: open callback received
- [ 10.020416] open partition /boot/modem_fs2 handle=2
- [ 10.020965] rmt_storage_event_user_data_cb: send user data callback received
- [ 10.021514] rmt_storage_event_open_cb: open callback received
- [ 10.021697] open partition /boot/modem_fsg handle=3
- [ 10.022216] rmt_storage_event_user_data_cb: send user data callback received
- [ 10.022796] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received
- [ 10.023437] rmt_storage_event_read_iovec_cb: read iovec callback received
- [ 10.041748] type=1400 audit(1443616565.167:24): avc: denied { read write } for pid=257 comm="ks" name="ttyHSL1" dev=tmpfs ino=3141 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 10.042388] type=1400 audit(1443616565.167:25): avc: denied { open } for pid=257 comm="ks" name="ttyHSL1" dev=tmpfs ino=3141 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 10.043029] type=1400 audit(1443616565.167:26): avc: denied { ioctl } for pid=257 comm="ks" path="/dev/ttyHSL1" dev=tmpfs ino=3141 scontext=u:r:mdm_helper:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 10.043823] type=1400 audit(1443616565.167:27): avc: denied { write } for pid=248 comm="rmt_storage" name="mmcblk0p10" dev=tmpfs ino=3186 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:mmc_block_device:s0 tclass=blk_file
- [ 10.045837] type=1400 audit(1443616565.167:28): avc: denied { ioctl } for pid=248 comm="rmt_storage" path="/dev/rmt_storage" dev=tmpfs ino=3325 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 10.046203] type=1400 audit(1443616565.167:29): avc: denied { read write } for pid=248 comm="rmt_storage" path="/dev/rmt_storage" dev=tmpfs ino=3325 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:device:s0 tclass=chr_file
- [ 10.089385] rmt_storage_ioctl: send status ioctl
- [ 10.090087] rmt_storage_event_read_iovec_cb: read iovec callback received
- [ 10.175933] rmt_storage_ioctl: send status ioctl
- [ 10.183319] rmt_storage_event_read_iovec_cb: read iovec callback received
- [ 10.643005] rmt_storage_ioctl: send status ioctl
- [ 10.912780] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 59080000
- [ 11.285919] SELinux: 2048 avtab hash slots, 8174 rules.
- [ 11.289794] SELinux: 2048 avtab hash slots, 8174 rules.
- [ 11.289978] SELinux: 1 users, 2 roles, 653 types, 0 bools, 1 sens, 1024 cats
- [ 11.290313] SELinux: 86 classes, 8174 rules
- [ 11.891967] SELinux: 2048 avtab hash slots, 8174 rules.
- [ 11.895263] SELinux: 2048 avtab hash slots, 8174 rules.
- [ 11.895385] SELinux: 1 users, 2 roles, 653 types, 0 bools, 1 sens, 1024 cats
- [ 11.895721] SELinux: 86 classes, 8174 rules
- [ 12.225982] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
- [ 12.283325] audit_log_lost: 2 callbacks suppressed
- [ 12.283447] audit: audit_lost=5 audit_rate_limit=20 audit_backlog_limit=64
- [ 12.283630] audit: rate limit exceeded
- [ 12.625457] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
- [ 12.720581] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
- [ 13.110900] init: untracked pid 434 exited with status 0
- [ 13.676757] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1
- [ 13.677093] msm8x60_multi_sdio_slot_status_irq: calling sdc2_status_notify_cb
- [ 13.677459] msm8x60_multi_sdio_slot_status_irq: calling sdc5_status_notify_cb
- [ 13.734008] mmc1: new high speed SDIO card at address 0002
- [ 13.745666] mmc mmc1:0002: SDIO Card claimed.
- [ 13.746154] sdio_al:setup bootloader on card 1
- [ 13.746398] sdio_al: SDIOC BOOT SW version 0x30001
- [ 13.746673] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
- [ 13.746887] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
- [ 13.747406] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
- [ 13.747955] sdio_al:In Flashless boot, waiting for its completion
- [ 13.748138] sdio_al:free sdioc_boot_sw_header.
- [ 13.814636] mmc4: new high speed SDIO card at address 0002
- [ 13.815551] mmc mmc4:0002: SDIO Card claimed.
- [ 13.816040] sdio_al:wait for bootloader completion on card 4
- [ 13.816345] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
- [ 14.500274] audit: audit_lost=9 audit_rate_limit=20 audit_backlog_limit=64
- [ 14.500640] audit: rate limit exceeded
- [ 15.531066] audit: audit_lost=15 audit_rate_limit=20 audit_backlog_limit=64
- [ 15.531280] audit: rate limit exceeded
- [ 15.537506] msm_release_control: control0
- [ 15.537628] __msm_release, open count =0
- [ 15.537780] __msm_release, release VFE
- [ 15.600646] auddev_cb_function, evt_id=64,
- [ 15.600769] msm_reset_put:Resetting all devices
- [ 15.600952] msm_clear_all_session:
- [ 15.671997] apr_tal: SMD_EVENT_OPEN
- [ 15.677642] pcm_in_open: pcm in open session id[1]
- [ 15.692321] [pcm_in.c:pcm_in_release] release session id[1]
- [ 16.170257] sdio_al: sdio_dld_open, TTY DEVICE FOR FLASHLESS BOOT OPENED
- [ 16.257781] charm_status_change: charm sent status change interrupt
- [ 16.257934] charm_status_change: charm is now ready
- [ 20.027618] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - DURATION IN MSEC = 3860
- [ 20.027923] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES WRITTEN ON SDIO BUS = 30325344...BYTES SENT BY TTY = 30325344
- [ 20.028259] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES RECEIVED ON SDIO BUS = 1732...BYTES SENT TO TTY = 1732
- [ 20.028686] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - THROUGHPUT=62 Mbit/Sec
- [ 20.028991] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL_BUFFER_SIZE=16 KB..CLIENT UL_BUFFER=48 KB
- [ 20.029418] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST OUTGOING BUFFER_SIZE=48 KB
- [ 20.029724] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL BUFFER ADDRESS = 0x4000
- [ 20.030120] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT UP BUFFER ADDRESS = 0x8000
- [ 20.030426] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - READ POINTER = 47712
- [ 20.030975] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - WRITE POINTER = 47712
- [ 20.031311] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - READ POINTER = 1732
- [ 20.031585] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - WRITE POINTER = 1732
- [ 20.031860] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - READ POINTER = 47712
- [ 20.032135] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - WRITE POINTER = 47712
- [ 20.032318] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - END DEBUG INFO
- [ 20.032623] sdio_al:Got bootloader_done event..
- [ 20.033020] sdio_al:Got bootloader_done event..
- [ 20.033538] sdio_al: sdio_dld_close - Bootloader done, returning...
- [ 20.035827] charm_modem_ioctl: Entering ioctl cmd = 5
- [ 20.036254] charm_modem_ioctl: check if charm is booted up
- [ 20.036499] charm_modem_ioctl: Entering ioctl cmd = 7
- [ 20.036804] charm_modem_ioctl: wait for charm to need images reloaded
- [ 21.017272] sdio_al:user_irq enabled
- [ 21.017608] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
- [ 21.017730] sdio_al:sdio_al_setup for card 4
- [ 21.021026] sdio_al:claim IRQ for card 4
- [ 21.023681] rpcrouter_sdio_remote_probe Called
- [ 21.024261] sdio_al:ch SDIO_RPC read_threshold=1, write_threshold=576, min_write_avail=544, max_rx_threshold=1088, max_tx_threshold=1152
- [ 21.029052] sdio_al:sdio_open SDIO_RPC completed OK
- [ 21.029174] sdio_al: setting channel SDIO_RPC as lpm_chan
- [ 21.029296] rpcrouter_sdio_remote_probe Completed
- [ 22.752349] input: compass_sensor as /devices/virtual/input/input11
- [ 22.757781] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- [ 22.758728] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_FUSE_ACCESS
- [ 22.760467] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- [ 22.777801] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- [ 23.447570] sensor_power_on_vdd: vdd_2p85=5, vdd_1p8=5, vdd_2p_4=0, vdd_2p85_mag=0
- [ 23.447692] 15323
- [ 23.447784] LED_onoff: LED_onff = 1
- [ 23.467834] opt_i2c_write(497): : 0x1, 0x8
- [ 23.468505] opt_i2c_write(497): : 0x2, 0x40
- [ 23.469177] opt_i2c_write(497): : 0x3, 0x0
- [ 23.469909] opt_i2c_write(497): : 0x4, 0x3
- [ 23.470458] opt_i2c_write(497): : 0x5, 0xc0
- [ 23.471313] opt_i2c_write(497): : 0x4, 0x1
- [ 23.527221] proximity_enable_store(253): [PROX] Start proximity = 1
- [ 23.527832] opt_i2c_write(497): : 0x4, 0x3
- [ 23.767944] [GYRO] k3g_set_enable: dps = 0 CTRL_REG4 = 0x90
- [ 23.801605] opt_i2c_write(497): : 0x4, 0x2
- [ 23.801879] 15323
- [ 23.803100] LED_onoff: LED_onff = 0
- [ 23.803497] vreg_set_voltage: 8058_l9: request v=[0, 0] is outside possible v=[750000, 4900000]
- [ 23.803863] sensor_power_off_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- [ 24.550628] request_suspend_state: wakeup (3->0) at 24523483407 (2015-09-30 12:36:19.690371270 UTC)
- [ 24.755096] sdio_al:ch SDIO_QMI read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=8192, max_tx_threshold=8192
- [ 24.757232] sdio_al:user_irq enabled
- [ 24.757476] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
- [ 24.757720] sdio_al:sdio_al_setup for card 1
- [ 24.757934] sdio_al:sdio_open SDIO_QMI completed OK
- [ 24.760040] sdio_ctl_probe Begins
- [ 24.761596] sdio_al:claim IRQ for card 1
- [ 24.827423] sdio_al:ch SDIO_RMNT read_threshold=1, write_threshold=4096, min_write_avail=1600, max_rx_threshold=15360, max_tx_threshold=8192
- [ 24.828033] sdio_al:sdio_open SDIO_RMNT completed OK
- [ 24.828155] sdio_al: setting channel SDIO_RMNT as lpm_chan
- [ 25.146240] msm_sdio_dmux_open: opened ch 0
- [ 25.647003] msm_sdio_dmux_open: opened ch 1
- [ 25.647399] msm_sdio_dmux_open: opened ch 2
- [ 25.647644] msm_sdio_dmux_open: opened ch 3
- [ 25.647888] msm_sdio_dmux_open: opened ch 4
- [ 25.648193] msm_sdio_dmux_open: opened ch 5
- [ 25.648437] msm_sdio_dmux_open: opened ch 6
- [ 25.648742] msm_sdio_dmux_open: opened ch 7
- [ 26.027252] ERROR sdio_cmux_open: Wait Timed Out for ch0
- [ 26.027435] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- [ 27.527252] ERROR sdio_cmux_open: Wait Timed Out for ch0
- [ 27.527404] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- [ 29.027221] ERROR sdio_cmux_open: Wait Timed Out for ch0
- [ 29.027343] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- [ 30.527252] ERROR sdio_cmux_open: Wait Timed Out for ch0
- [ 30.527465] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
- [ 30.837341] sdio_al: sdio_enable_func() err=62
- [ 30.837463] sdio_al:sdio_open SDIO_DIAG err=62
- [ 30.837646] DIAG could not open SDIO channel
- [ 30.837768] SDIO_DIAG: probe of SDIO_DIAG failed with error -62
- [ 30.878417] rmt_storage_probe: Remote storage RPC client (0x300100a7)initialized
- [ 41.275665] apr_tal:Modem Is Up
- [ 45.467224] sec_bat_measure_work: adc work already on a queue
- [ 45.475860] healthd: battery [l=65 v=3747 t=28.2 h=2 st=3] dock-battery none chg=
- [ 85.547210] sec_bat_polling_work: adc work already on a queue
- [ 85.552062] healthd: battery [l=65 v=3757 t=28.6 h=2 st=3] dock-battery none chg=
- [ 125.629089] sec_bat_measure_work: adc work already on a queue
- [ 125.631225] [fg] p:6105, s1:64, s2:65, v:3752500, t:957
- [ 125.633911] healthd: battery [l=64 v=3752 t=28.7 h=2 st=3] dock-battery none chg=
- [ 149.679321] healthd: battery [l=64 v=3752 t=28.7 h=2 st=3] dock-battery none chg=
- [ 150.692260] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- [ 150.692779] [VIBETONZ] DISABLE
- [ 151.887359] lowmem_shrink: convert oom_adj to oom_score_adj:
- [ 151.887603] oom_adj 0 => oom_score_adj 0
- [ 151.887725] oom_adj 1 => oom_score_adj 58
- [ 151.887847] oom_adj 2 => oom_score_adj 117
- [ 151.888031] oom_adj 3 => oom_score_adj 176
- [ 151.888153] oom_adj 9 => oom_score_adj 529
- [ 151.888275] oom_adj 15 => oom_score_adj 1000
- [ 155.355865] msm_release_control: control0
- [ 155.356079] __msm_release, open count =0
- [ 155.356231] __msm_release, release VFE
- [ 155.371734] msm_camio_sensor_clk_on
- [ 155.387268] camera_power_maincam :ON
- [ 155.393035] AF 2.8V
- [ 155.399841] SENSOR IO 1.8V
- [ 155.437622] msm_camio_sensor_clk_on : X
- [ 155.437744] [M5MO] m5mo_sensor_open_init:2418:E
- [ 155.437866] [M5MO] m5mo_register_isp_irq : E
- [ 155.438171] [M5MO] m5mo_start : E
- [ 155.438598] [M5MO] m5mo_wait_interrupt :E
- [ 155.522674] [M5MO]**************** interrupt ****************
- [ 155.523742] [M5MO] m5mo_wait_interrupt: X: 0x1
- [ 155.528625] *************************************
- [ 155.528839] [M5MO] F/W Version: SDEH0D
- [ 155.529022] [M5MO] Firmware Version: 1
- [ 155.529205] [M5MO] Parameter Version: 3118
- [ 155.529541] [M5MO] AWB Version: 2a06
- [ 155.529724] *************************************
- [ 155.530731] [M5MO]set Preview size as VGA
- [ 155.531250] [M5MO]set antibanding
- [ 155.533172] [M5MO] m5mo_start : X
- [ 155.533386] [M5MO] m5mo_sensor_init_probe : m5mo_start END 1
- [ 155.533691] [M5MO] m5mo_sensor_open_init:2458:X
- [ 155.928985] [M5MO] m5mo_set_fps : fps : 30
- [ 155.929473] [M5MO] m5mo_set_scene : 1
- [ 155.930236] [M5MO] m5mo_set_ev : 4
- [ 155.930664] [M5MO] m5mo_set_saturation : 2
- [ 155.931243] [M5MO] m5mo_set_sharpness : 2
- [ 155.932250] [M5MO] m5mo_set_whitebalance : 1
- [ 155.942199] msm_release_config: config0
- [ 155.942382] __msm_release, open count =1
- [ 155.942901] msm_release_control: control0
- [ 155.943023] msm_release_control, stop vfe if active
- [ 155.943267] __msm_release, open count =0
- [ 155.943389] __msm_release, release VFE
- [ 155.973663] __msm_release, release Sensor
- [ 155.973876] [M5MO] m5mo_set_af_softlanding : E
- [ 155.974487] [M5MO] m5mo_set_mode : E 0x1 -> 0x2
- [ 155.975616] [M5MO] m5mo_i2c_verify : [c,b,v] [00, 0b, 02] (try = 0)
- [ 155.975769] [M5MO] m5mo_set_mode : X
- [ 155.997772] [M5MO]status = 4
- [ 155.997924] [M5MO] m5mo_set_af_softlanding : X
- [ 156.001159] msm_camio_sensor_clk_off
- [ 156.017242] camera_power_maincam :OFF
- [ 156.031768] msm_camio_sensor_clk_off : X
- [ 156.341430] msm_release_control: control0
- [ 156.341735] __msm_release, open count =0
- [ 156.341888] __msm_release, release VFE
- [ 156.350341] msm_camio_sensor_clk_on
- [ 156.367218] camera_power_vtcam :ON
- [ 156.407226] msm_camio_sensor_clk_on : X
- [ 156.407440] [5BAFX] s5k5bafx_sensor_open_init : E
- [ 156.407714] [5BAFX] s5k5bafx_sensor_open_init : X
- [ 156.411163] [5BAFX] s5k5bafx_sensor_ext_config : cmd = 10 , param1 = 15
- [ 156.411346] [5BAFX] s5k5bafx_sensor_ext_config:1151:camera isn't initialized
- [ 156.411376]
- [ 156.417938] msm_release_config: config1
- [ 156.418212] __msm_release, open count =1
- [ 156.418731] msm_release_control: control1
- [ 156.418853] msm_release_control, stop vfe if active
- [ 156.419097] __msm_release, open count =0
- [ 156.419219] __msm_release, release VFE
- [ 156.453674] __msm_release, release Sensor
- [ 156.453857] msm_camio_sensor_clk_off
- [ 156.467346] camera_power_vtcam :OFF
- [ 156.477813] msm_camio_sensor_clk_off : X
- [ 164.731079] acc_open
- [ 164.731201] acc_release
- [ 165.721252] healthd: battery [l=64 v=3782 t=28.8 h=2 st=3] dock-battery none chg=
- [ 167.974395] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- [ 167.974548] [VIBETONZ] DISABLE
- [ 167.978027] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
- [ 167.978210] [VIBETONZ] ENABLE
- [ 167.981658] [VIBETONZ] DISABLE
- [ 168.001983] [VIBETONZ] enable_vibetonz_from_user : time = 21 msec
- [ 168.002105] [VIBETONZ] ENABLE
- [ 168.025512] [VIBETONZ] DISABLE
- [ 168.949829] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- [ 168.950927] [VIBETONZ] DISABLE
- [ 170.349121] wifi_set_power = 1
- [ 170.349212] brcm_wlan_power: 1
- [ 170.437164] wifi_set_carddetect = 1
- [ 170.437255] msm_device_sdc4.name= 4
- [ 170.551605] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 170.554199] mmc3: queuing unknown CIS tuple 0x80 (6 bytes)
- [ 170.612915] mmc3: new high speed SDIO card at address 0001
- [ 170.616790]
- [ 170.616821] Dongle Host Driver, version 1.28.19.9 (RC1_0107)
- [ 170.616851] Compiled in drivers/net/wireless/bcmdhd on Sep 29 2015 at 01:01:08
- [ 170.618194] alloc static buf at de980000!
- [ 170.618835] dhdsdio_probe : no mutex held. set lock
- [ 170.619140] F1 signature read @0x18000000=0x16834330
- [ 170.624298] DHD: dongle ram size is set to 294912(orig 294912)
- [ 170.627532] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xdd579e40
- [ 170.627807] wl_create_event_handler thr:2cb created
- [ 170.632415] p2p0: P2P Interface Registered
- [ 170.633300] dhd_attach thr:2cc created
- [ 170.633972] dhd_attach thr:2cd created
- [ 170.634216] dhd_attach thr:2ce created
- [ 171.720642] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 171.844207] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 171.848785] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
- [ 171.853973] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=14:cc:eb
- [ 172.085205] POWER_VAL = 1
- [ 172.106781] dhd_wl_ioctl: WLC_GET_VAR: arp_version, ret = -23
- [ 172.111480] Firmware version = wl0: Dec 6 2012 21:27:24 version 5.90.100.430 (JB) (WFD)
- [ 172.612426] SELinux: Context u:object_r:wifi_efs_file:s0 is not valid (left unmapped).
- [ 172.620361] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 14:cc:eb
- [ 172.620574] dhdsdio_probe : the lock is released.
- [ 173.950317]
- [ 173.950317] Dongle Host Driver, version 1.28.19.9 (RC1_0107)
- [ 173.950347] Compiled in drivers/net/wireless/bcmdhd on Sep 29 2015 at 01:01:08
- [ 173.958740] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=16:cc:eb
- [ 174.511566] light_delay_store, new_delay = 1000, old_delay = 200
- [ 174.517364] light_delay_store, new_delay = 1000, old_delay = 1000ld9040 get_gamma_value_from_bl >>> bl_value:10, gamma_value: 0.
- [ 174.657226] ld9040 brightness!!! bl_level=10, tune_level=0 curr=18
- [ 174.657836] ld9040 ACL_cutoff_set Percentage : off!!
- [ 174.659332] ld9040 ea8868_gamma_ctl 0 0
- [ 176.469909] audit: audit_lost=22 audit_rate_limit=20 audit_backlog_limit=64
- [ 176.470092] audit: rate limit exceeded
- [ 178.708068] apr_tal: SMD_EVENT_OPEN
- [ 178.714538] evrc_in_open:session id 1: NT mode encoder success
- [ 178.714721] evrc_in_open:session id 1: success
- [ 178.719390] audio_in_release: session id 1
- [ 178.829620] apr_tal: SMD_EVENT_OPEN
- [ 178.835754] qcelp_in_open:session id 1: NT mode encoder success
- [ 178.835876] qcelp_in_open:session id 1: success
- [ 178.840515] audio_in_release: session id 1
- [ 178.862152] msm_vidc_venc: Inside vid_enc_open()
- [ 178.862274]
- [ 178.862274] msm_vidc_enc: Inside vid_enc_open_client()
- [ 178.862609]
- [ 178.862609] res_trk_download_firmware(): Request firmware download
- [ 179.319122]
- [ 179.319122] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.337615] fw_version 7:19:2012
- [ 179.338775]
- [ 179.338775] msm_vidc_enc: Inside vid_enc_release()
- [ 179.339050]
- [ 179.339050] msm_vidc_enc: Inside vid_enc_close_client()
- [ 179.348358] SELinux: initialized (dev mmcblk0p28, type vfat), uses genfs_contexts
- [ 179.361663]
- [ 179.361663] msm_vidc_enc: Return from vid_enc_release()
- [ 179.363342] msm_vidc_venc: Inside vid_enc_open()
- [ 179.363616]
- [ 179.363616] msm_vidc_enc: Inside vid_enc_open_client()
- [ 179.366333]
- [ 179.366333] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.387512] fw_version 7:19:2012
- [ 179.390136]
- [ 179.390136] msm_vidc_enc: Inside vid_enc_release()
- [ 179.390472]
- [ 179.390472] msm_vidc_enc: Inside vid_enc_close_client()
- [ 179.410797]
- [ 179.410797] msm_vidc_enc: Return from vid_enc_release()
- [ 179.412261] msm_vidc_venc: Inside vid_enc_open()
- [ 179.412445]
- [ 179.412475] msm_vidc_enc: Inside vid_enc_open_client()
- [ 179.413635]
- [ 179.413635] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.437469] fw_version 7:19:2012
- [ 179.438476]
- [ 179.438507] msm_vidc_enc: Inside vid_enc_release()
- [ 179.438812]
- [ 179.438812] msm_vidc_enc: Inside vid_enc_close_client()
- [ 179.460693]
- [ 179.460723] msm_vidc_enc: Return from vid_enc_release()
- [ 179.475799] msm_vidc_dec: Inside vid_dec_open()
- [ 179.476837]
- [ 179.476837] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.497497] fw_version 7:19:2012
- [ 179.502563] msm_vidc_dec: Inside vid_dec_release()
- [ 179.520751] msm_vidc_dec: Return from vid_dec_release()
- [ 179.523986]
- [ 179.524017] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.547485] fw_version 7:19:2012
- [ 179.547821] Securing...
- [ 179.548278] Failed to protect memory for heap mm - error code: -95
- [ 179.548400] ION heap secure failed heap id 8 rc -95
- [ 179.548583] Secure session operation failure
- [ 179.567291] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 179.672027]
- [ 179.672027] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.688659] fw_version 7:19:2012
- [ 179.688995] Securing...
- [ 179.689392] Failed to protect memory for heap mm - error code: -95
- [ 179.689575] ION heap secure failed heap id 8 rc -95
- [ 179.689697] Secure session operation failure
- [ 179.707275] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 179.710083] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- [ 179.812133]
- [ 179.812133] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.827484] fw_version 7:19:2012
- [ 179.828002] Securing...
- [ 179.828430] Failed to protect memory for heap mm - error code: -95
- [ 179.828613] ION heap secure failed heap id 8 rc -95
- [ 179.828735] Secure session operation failure
- [ 179.847320] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 179.951904]
- [ 179.951904] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 179.967498] fw_version 7:19:2012
- [ 179.967742] Securing...
- [ 179.968109] Failed to protect memory for heap mm - error code: -95
- [ 179.968292] ION heap secure failed heap id 8 rc -95
- [ 179.968383] Secure session operation failure
- [ 179.987243] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.091766]
- [ 180.091766] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.107452] fw_version 7:19:2012
- [ 180.107818] Securing...
- [ 180.108184] Failed to protect memory for heap mm - error code: -95
- [ 180.108276] ION heap secure failed heap id 8 rc -95
- [ 180.108459] Secure session operation failure
- [ 180.128082] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.232666]
- [ 180.232696] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.247467] fw_version 7:19:2012
- [ 180.247802] Securing...
- [ 180.248199] Failed to protect memory for heap mm - error code: -95
- [ 180.248382] ION heap secure failed heap id 8 rc -95
- [ 180.248504] Secure session operation failure
- [ 180.267272] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.371887]
- [ 180.371887] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.387634] fw_version 7:19:2012
- [ 180.387969] Securing...
- [ 180.388427] Failed to protect memory for heap mm - error code: -95
- [ 180.388549] ION heap secure failed heap id 8 rc -95
- [ 180.388732] Secure session operation failure
- [ 180.407318] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.512207]
- [ 180.512207] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.528106] fw_version 7:19:2012
- [ 180.528503] Securing...
- [ 180.528930] Failed to protect memory for heap mm - error code: -95
- [ 180.529052] ION heap secure failed heap id 8 rc -95
- [ 180.529235] Secure session operation failure
- [ 180.547271] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.651916]
- [ 180.651916] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.667510] fw_version 7:19:2012
- [ 180.667816] Securing...
- [ 180.668182] Failed to protect memory for heap mm - error code: -95
- [ 180.668395] ION heap secure failed heap id 8 rc -95
- [ 180.668487] Secure session operation failure
- [ 180.687316] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.792236]
- [ 180.792236] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.807495] fw_version 7:19:2012
- [ 180.807769] Securing...
- [ 180.808197] Failed to protect memory for heap mm - error code: -95
- [ 180.808319] ION heap secure failed heap id 8 rc -95
- [ 180.808502] Secure session operation failure
- [ 180.827392] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 180.932739]
- [ 180.932739] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 180.947631] fw_version 7:19:2012
- [ 180.947937] Securing...
- [ 180.948303] Failed to protect memory for heap mm - error code: -95
- [ 180.948577] ION heap secure failed heap id 8 rc -95
- [ 180.948699] Secure session operation failure
- [ 180.967285] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.071472]
- [ 181.071472] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.087524] fw_version 7:19:2012
- [ 181.087829] Securing...
- [ 181.088195] Failed to protect memory for heap mm - error code: -95
- [ 181.088409] ION heap secure failed heap id 8 rc -95
- [ 181.088531] Secure session operation failure
- [ 181.107910] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.212402]
- [ 181.212432] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.227539] fw_version 7:19:2012
- [ 181.227874] Securing...
- [ 181.228271] Failed to protect memory for heap mm - error code: -95
- [ 181.228393] ION heap secure failed heap id 8 rc -95
- [ 181.228576] Secure session operation failure
- [ 181.247375] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.352050]
- [ 181.352050] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.367462] fw_version 7:19:2012
- [ 181.367736] Securing...
- [ 181.368103] Failed to protect memory for heap mm - error code: -95
- [ 181.368286] ION heap secure failed heap id 8 rc -95
- [ 181.368408] Secure session operation failure
- [ 181.387237] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.491851]
- [ 181.491882] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.507507] fw_version 7:19:2012
- [ 181.507781] Securing...
- [ 181.508209] Failed to protect memory for heap mm - error code: -95
- [ 181.508331] ION heap secure failed heap id 8 rc -95
- [ 181.508514] Secure session operation failure
- [ 181.527282] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.550659] ld9040 get_gamma_value_from_bl >>> bl_value:11, gamma_value: 0.
- [ 181.550689] ld9040 brightness!!! bl_level=11, tune_level=0 curr=0
- [ 181.567779] ld9040 get_gamma_value_from_bl >>> bl_value:12, gamma_value: 0.
- [ 181.567810] ld9040 brightness!!! bl_level=12, tune_level=0 curr=0
- [ 181.601074] ld9040 get_gamma_value_from_bl >>> bl_value:13, gamma_value: 0.
- [ 181.601104] ld9040 brightness!!! bl_level=13, tune_level=0 curr=0
- [ 181.617797] ld9040 get_gamma_value_from_bl >>> bl_value:14, gamma_value: 0.
- [ 181.617858] ld9040 brightness!!! bl_level=14, tune_level=0 curr=0
- [ 181.633972]
- [ 181.634002] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.651153] ld9040 get_gamma_value_from_bl >>> bl_value:15, gamma_value: 0.
- [ 181.651184] ld9040 brightness!!! bl_level=15, tune_level=0 curr=0
- [ 181.657470] fw_version 7:19:2012
- [ 181.657836] Securing...
- [ 181.658233] Failed to protect memory for heap mm - error code: -95
- [ 181.658386] ION heap secure failed heap id 8 rc -95
- [ 181.658569] Secure session operation failure
- [ 181.668395] ld9040 get_gamma_value_from_bl >>> bl_value:16, gamma_value: 0.
- [ 181.668426] ld9040 brightness!!! bl_level=16, tune_level=0 curr=0
- [ 181.677246] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.701385] ld9040 get_gamma_value_from_bl >>> bl_value:17, gamma_value: 0.
- [ 181.701416] ld9040 brightness!!! bl_level=17, tune_level=0 curr=0
- [ 181.718658] ld9040 get_gamma_value_from_bl >>> bl_value:18, gamma_value: 0.
- [ 181.718688] ld9040 brightness!!! bl_level=18, tune_level=0 curr=0
- [ 181.752288] ld9040 get_gamma_value_from_bl >>> bl_value:19, gamma_value: 0.
- [ 181.752349] ld9040 brightness!!! bl_level=19, tune_level=0 curr=0
- [ 181.768615] ld9040 get_gamma_value_from_bl >>> bl_value:20, gamma_value: 0.
- [ 181.768646] ld9040 brightness!!! bl_level=20, tune_level=0 curr=0
- [ 181.782043]
- [ 181.782043] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.797485] fw_version 7:19:2012
- [ 181.797790] Securing...
- [ 181.798156] Failed to protect memory for heap mm - error code: -95
- [ 181.798339] ION heap secure failed heap id 8 rc -95
- [ 181.798461] Secure session operation failure
- [ 181.801940] ld9040 get_gamma_value_from_bl >>> bl_value:21, gamma_value: 0.
- [ 181.801971] ld9040 brightness!!! bl_level=21, tune_level=0 curr=0
- [ 181.817291] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.818725] ld9040 get_gamma_value_from_bl >>> bl_value:22, gamma_value: 0.
- [ 181.818786] ld9040 brightness!!! bl_level=22, tune_level=0 curr=0
- [ 181.852203] ld9040 get_gamma_value_from_bl >>> bl_value:23, gamma_value: 0.
- [ 181.852233] ld9040 brightness!!! bl_level=23, tune_level=0 curr=0
- [ 181.869018] ld9040 get_gamma_value_from_bl >>> bl_value:24, gamma_value: 0.
- [ 181.869049] ld9040 brightness!!! bl_level=24, tune_level=0 curr=0
- [ 181.902496] ld9040 get_gamma_value_from_bl >>> bl_value:25, gamma_value: 0.
- [ 181.902557] ld9040 brightness!!! bl_level=25, tune_level=0 curr=0
- [ 181.919403] ld9040 get_gamma_value_from_bl >>> bl_value:26, gamma_value: 0.
- [ 181.919433] ld9040 brightness!!! bl_level=26, tune_level=0 curr=0
- [ 181.922027]
- [ 181.922058] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 181.937500] fw_version 7:19:2012
- [ 181.937805] Securing...
- [ 181.938232] Failed to protect memory for heap mm - error code: -95
- [ 181.938476] ION heap secure failed heap id 8 rc -95
- [ 181.938720] Secure session operation failure
- [ 181.952728] ld9040 get_gamma_value_from_bl >>> bl_value:27, gamma_value: 0.
- [ 181.952789] ld9040 brightness!!! bl_level=27, tune_level=0 curr=0
- [ 181.957275] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 181.969635] ld9040 get_gamma_value_from_bl >>> bl_value:28, gamma_value: 0.
- [ 181.969665] ld9040 brightness!!! bl_level=28, tune_level=0 curr=0
- [ 182.008819] ld9040 get_gamma_value_from_bl >>> bl_value:29, gamma_value: 0.
- [ 182.008850] ld9040 brightness!!! bl_level=29, tune_level=0 curr=0
- [ 182.025115] ld9040 get_gamma_value_from_bl >>> bl_value:30, gamma_value: 0.
- [ 182.025146] ld9040 brightness!!! bl_level=30, tune_level=0 curr=0
- [ 182.053497] ld9040 get_gamma_value_from_bl >>> bl_value:31, gamma_value: 0.
- [ 182.053527] ld9040 brightness!!! bl_level=31, tune_level=0 curr=0
- [ 182.061950]
- [ 182.061981] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.070129] ld9040 get_gamma_value_from_bl >>> bl_value:32, gamma_value: 0.
- [ 182.070159] ld9040 brightness!!! bl_level=32, tune_level=0 curr=0
- [ 182.077484] fw_version 7:19:2012
- [ 182.077758] Securing...
- [ 182.078155] Failed to protect memory for heap mm - error code: -95
- [ 182.078338] ION heap secure failed heap id 8 rc -95
- [ 182.078460] Secure session operation failure
- [ 182.097320] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.103820] ld9040 get_gamma_value_from_bl >>> bl_value:33, gamma_value: 0.
- [ 182.103851] ld9040 brightness!!! bl_level=33, tune_level=0 curr=0
- [ 182.120727] ld9040 get_gamma_value_from_bl >>> bl_value:34, gamma_value: 0.
- [ 182.120758] ld9040 brightness!!! bl_level=34, tune_level=0 curr=0
- [ 182.153961] ld9040 get_gamma_value_from_bl >>> bl_value:35, gamma_value: 0.
- [ 182.153991] ld9040 brightness!!! bl_level=35, tune_level=0 curr=0
- [ 182.170837] ld9040 get_gamma_value_from_bl >>> bl_value:36, gamma_value: 0.
- [ 182.170867] ld9040 brightness!!! bl_level=36, tune_level=0 curr=0
- [ 182.202270]
- [ 182.202301] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.205017] ld9040 get_gamma_value_from_bl >>> bl_value:37, gamma_value: 0.
- [ 182.205047] ld9040 brightness!!! bl_level=37, tune_level=0 curr=0
- [ 182.217681] fw_version 7:19:2012
- [ 182.217987] Securing...
- [ 182.218383] Failed to protect memory for heap mm - error code: -95
- [ 182.218658] ION heap secure failed heap id 8 rc -95
- [ 182.218780] Secure session operation failure
- [ 182.221588] ld9040 get_gamma_value_from_bl >>> bl_value:38, gamma_value: 0.
- [ 182.221618] ld9040 brightness!!! bl_level=38, tune_level=0 curr=0
- [ 182.237335] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.259185] ld9040 get_gamma_value_from_bl >>> bl_value:39, gamma_value: 0.
- [ 182.259246] ld9040 brightness!!! bl_level=39, tune_level=0 curr=0
- [ 182.271270] ld9040 get_gamma_value_from_bl >>> bl_value:40, gamma_value: 1.
- [ 182.271301] ld9040 brightness!!! bl_level=40, tune_level=1 curr=0
- [ 182.271972] ld9040 if bl_value is 0 or 1, acl_on skipped
- [ 182.273406] ld9040 ea8868_gamma_ctl 1 1
- [ 182.305419] ld9040 get_gamma_value_from_bl >>> bl_value:41, gamma_value: 1.
- [ 182.305450] ld9040 brightness!!! bl_level=41, tune_level=1 curr=1
- [ 182.321746] ld9040 get_gamma_value_from_bl >>> bl_value:42, gamma_value: 1.
- [ 182.321777] ld9040 brightness!!! bl_level=42, tune_level=1 curr=1
- [ 182.338928] ld9040 get_gamma_value_from_bl >>> bl_value:43, gamma_value: 1.
- [ 182.338989] ld9040 brightness!!! bl_level=43, tune_level=1 curr=1
- [ 182.342010]
- [ 182.342041] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.357482] fw_version 7:19:2012
- [ 182.357757] Securing...
- [ 182.358154] Failed to protect memory for heap mm - error code: -95
- [ 182.358337] ION heap secure failed heap id 8 rc -95
- [ 182.358428] Secure session operation failure
- [ 182.371826] ld9040 get_gamma_value_from_bl >>> bl_value:44, gamma_value: 1.
- [ 182.371856] ld9040 brightness!!! bl_level=44, tune_level=1 curr=1
- [ 182.377319] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.388549] ld9040 get_gamma_value_from_bl >>> bl_value:45, gamma_value: 1.
- [ 182.388580] ld9040 brightness!!! bl_level=45, tune_level=1 curr=1
- [ 182.422149] ld9040 get_gamma_value_from_bl >>> bl_value:46, gamma_value: 1.
- [ 182.422210] ld9040 brightness!!! bl_level=46, tune_level=1 curr=1
- [ 182.438812] ld9040 get_gamma_value_from_bl >>> bl_value:47, gamma_value: 1.
- [ 182.438842] ld9040 brightness!!! bl_level=47, tune_level=1 curr=1
- [ 182.472442] ld9040 get_gamma_value_from_bl >>> bl_value:48, gamma_value: 1.
- [ 182.472503] ld9040 brightness!!! bl_level=48, tune_level=1 curr=1
- [ 182.482299]
- [ 182.482330] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.489135] ld9040 get_gamma_value_from_bl >>> bl_value:49, gamma_value: 1.
- [ 182.489166] ld9040 brightness!!! bl_level=49, tune_level=1 curr=1
- [ 182.497497] fw_version 7:19:2012
- [ 182.497924] Securing...
- [ 182.498321] Failed to protect memory for heap mm - error code: -95
- [ 182.498443] ION heap secure failed heap id 8 rc -95
- [ 182.498596] Secure session operation failure
- [ 182.517272] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.522766] ld9040 get_gamma_value_from_bl >>> bl_value:50, gamma_value: 2.
- [ 182.522796] ld9040 brightness!!! bl_level=50, tune_level=2 curr=1
- [ 182.525909] ld9040 ACL_cutoff_set Percentage : 40!!
- [ 182.527496] ld9040 ea8868_gamma_ctl 2 2
- [ 182.539367] ld9040 get_gamma_value_from_bl >>> bl_value:51, gamma_value: 2.
- [ 182.539398] ld9040 brightness!!! bl_level=51, tune_level=2 curr=2
- [ 182.572998] ld9040 get_gamma_value_from_bl >>> bl_value:52, gamma_value: 2.
- [ 182.573059] ld9040 brightness!!! bl_level=52, tune_level=2 curr=2
- [ 182.589721] ld9040 get_gamma_value_from_bl >>> bl_value:53, gamma_value: 2.
- [ 182.589752] ld9040 brightness!!! bl_level=53, tune_level=2 curr=2
- [ 182.621826]
- [ 182.621856] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.624816] ld9040 get_gamma_value_from_bl >>> bl_value:54, gamma_value: 2.
- [ 182.624877] ld9040 brightness!!! bl_level=54, tune_level=2 curr=2
- [ 182.637725] fw_version 7:19:2012
- [ 182.638122] Securing...
- [ 182.638549] Failed to protect memory for heap mm - error code: -95
- [ 182.638702] ION heap secure failed heap id 8 rc -95
- [ 182.638885] Secure session operation failure
- [ 182.640289] ld9040 get_gamma_value_from_bl >>> bl_value:55, gamma_value: 2.
- [ 182.640319] ld9040 brightness!!! bl_level=55, tune_level=2 curr=2
- [ 182.643768] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- [ 182.667388] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.685943] ld9040 get_gamma_value_from_bl >>> bl_value:56, gamma_value: 2.
- [ 182.686004] ld9040 brightness!!! bl_level=56, tune_level=2 curr=2
- [ 182.694000] ld9040 get_gamma_value_from_bl >>> bl_value:57, gamma_value: 2.
- [ 182.694030] ld9040 brightness!!! bl_level=57, tune_level=2 curr=2
- [ 182.728668] ld9040 get_gamma_value_from_bl >>> bl_value:58, gamma_value: 2.
- [ 182.728729] ld9040 brightness!!! bl_level=58, tune_level=2 curr=2
- [ 182.740509] ld9040 get_gamma_value_from_bl >>> bl_value:59, gamma_value: 2.
- [ 182.740539] ld9040 brightness!!! bl_level=59, tune_level=2 curr=2
- [ 182.772155]
- [ 182.772186] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.790771] ld9040 get_gamma_value_from_bl >>> bl_value:61, gamma_value: 3.
- [ 182.790802] ld9040 brightness!!! bl_level=61, tune_level=3 curr=2
- [ 182.792846] ld9040 ea8868_gamma_ctl 3 3
- [ 182.797515] fw_version 7:19:2012
- [ 182.797821] Securing...
- [ 182.798217] Failed to protect memory for heap mm - error code: -95
- [ 182.798431] ION heap secure failed heap id 8 rc -95
- [ 182.798522] Secure session operation failure
- [ 182.817413] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.824584] ld9040 get_gamma_value_from_bl >>> bl_value:62, gamma_value: 3.
- [ 182.824615] ld9040 brightness!!! bl_level=62, tune_level=3 curr=3
- [ 182.843994] ld9040 get_gamma_value_from_bl >>> bl_value:63, gamma_value: 3.
- [ 182.844055] ld9040 brightness!!! bl_level=63, tune_level=3 curr=3
- [ 182.874633] ld9040 get_gamma_value_from_bl >>> bl_value:64, gamma_value: 3.
- [ 182.874664] ld9040 brightness!!! bl_level=64, tune_level=3 curr=3
- [ 182.892303] ld9040 get_gamma_value_from_bl >>> bl_value:65, gamma_value: 3.
- [ 182.892333] ld9040 brightness!!! bl_level=65, tune_level=3 curr=3
- [ 182.899871] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- [ 182.922027]
- [ 182.922027] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 182.924896] ld9040 get_gamma_value_from_bl >>> bl_value:66, gamma_value: 3.
- [ 182.924957] ld9040 brightness!!! bl_level=66, tune_level=3 curr=3
- [ 182.937500] fw_version 7:19:2012
- [ 182.937744] Securing...
- [ 182.938140] Failed to protect memory for heap mm - error code: -95
- [ 182.938323] ION heap secure failed heap id 8 rc -95
- [ 182.938446] Secure session operation failure
- [ 182.941680] ld9040 get_gamma_value_from_bl >>> bl_value:67, gamma_value: 3.
- [ 182.941711] ld9040 brightness!!! bl_level=67, tune_level=3 curr=3
- [ 182.957244] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 182.975128] ld9040 get_gamma_value_from_bl >>> bl_value:68, gamma_value: 3.
- [ 182.975158] ld9040 brightness!!! bl_level=68, tune_level=3 curr=3
- [ 182.991851] ld9040 get_gamma_value_from_bl >>> bl_value:69, gamma_value: 3.
- [ 182.991882] ld9040 brightness!!! bl_level=69, tune_level=3 curr=3
- [ 183.025543] ld9040 get_gamma_value_from_bl >>> bl_value:70, gamma_value: 4.
- [ 183.025573] ld9040 brightness!!! bl_level=70, tune_level=4 curr=3
- [ 183.027496] ld9040 ea8868_gamma_ctl 4 4
- [ 183.042297] ld9040 get_gamma_value_from_bl >>> bl_value:71, gamma_value: 4.
- [ 183.042358] ld9040 brightness!!! bl_level=71, tune_level=4 curr=4
- [ 183.061126]
- [ 183.061157] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.075897] ld9040 get_gamma_value_from_bl >>> bl_value:72, gamma_value: 4.
- [ 183.075927] ld9040 brightness!!! bl_level=72, tune_level=4 curr=4
- [ 183.077453] fw_version 7:19:2012
- [ 183.077789] Securing...
- [ 183.078155] Failed to protect memory for heap mm - error code: -95
- [ 183.078338] ION heap secure failed heap id 8 rc -95
- [ 183.078460] Secure session operation failure
- [ 183.092590] ld9040 get_gamma_value_from_bl >>> bl_value:73, gamma_value: 4.
- [ 183.092651] ld9040 brightness!!! bl_level=73, tune_level=4 curr=4
- [ 183.097259] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.125976] ld9040 get_gamma_value_from_bl >>> bl_value:74, gamma_value: 4.
- [ 183.126007] ld9040 brightness!!! bl_level=74, tune_level=4 curr=4
- [ 183.142700] ld9040 get_gamma_value_from_bl >>> bl_value:75, gamma_value: 4.
- [ 183.142761] ld9040 brightness!!! bl_level=75, tune_level=4 curr=4
- [ 183.176269] ld9040 get_gamma_value_from_bl >>> bl_value:76, gamma_value: 4.
- [ 183.176300] ld9040 brightness!!! bl_level=76, tune_level=4 curr=4
- [ 183.193023] ld9040 get_gamma_value_from_bl >>> bl_value:77, gamma_value: 4.
- [ 183.193084] ld9040 brightness!!! bl_level=77, tune_level=4 curr=4
- [ 183.201843]
- [ 183.201843] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.217468] fw_version 7:19:2012
- [ 183.217742] Securing...
- [ 183.218139] Failed to protect memory for heap mm - error code: -95
- [ 183.218322] ION heap secure failed heap id 8 rc -95
- [ 183.218444] Secure session operation failure
- [ 183.226593] ld9040 get_gamma_value_from_bl >>> bl_value:78, gamma_value: 4.
- [ 183.226654] ld9040 brightness!!! bl_level=78, tune_level=4 curr=4
- [ 183.237274] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.243347] ld9040 get_gamma_value_from_bl >>> bl_value:79, gamma_value: 4.
- [ 183.243377] ld9040 brightness!!! bl_level=79, tune_level=4 curr=4
- [ 183.278961] ld9040 get_gamma_value_from_bl >>> bl_value:80, gamma_value: 5.
- [ 183.278991] ld9040 brightness!!! bl_level=80, tune_level=5 curr=4
- [ 183.280883] ld9040 ea8868_gamma_ctl 5 5
- [ 183.295776] ld9040 get_gamma_value_from_bl >>> bl_value:81, gamma_value: 5.
- [ 183.295806] ld9040 brightness!!! bl_level=81, tune_level=5 curr=5
- [ 183.327117] ld9040 get_gamma_value_from_bl >>> bl_value:82, gamma_value: 5.
- [ 183.327148] ld9040 brightness!!! bl_level=82, tune_level=5 curr=5
- [ 183.341796]
- [ 183.341796] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.343994] ld9040 get_gamma_value_from_bl >>> bl_value:83, gamma_value: 5.
- [ 183.344024] ld9040 brightness!!! bl_level=83, tune_level=5 curr=5
- [ 183.357482] fw_version 7:19:2012
- [ 183.357818] Securing...
- [ 183.358215] Failed to protect memory for heap mm - error code: -95
- [ 183.358520] ION heap secure failed heap id 8 rc -95
- [ 183.358642] Secure session operation failure
- [ 183.377288] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.377563] ld9040 get_gamma_value_from_bl >>> bl_value:84, gamma_value: 5.
- [ 183.377593] ld9040 brightness!!! bl_level=84, tune_level=5 curr=5
- [ 183.394561] ld9040 get_gamma_value_from_bl >>> bl_value:85, gamma_value: 5.
- [ 183.394592] ld9040 brightness!!! bl_level=85, tune_level=5 curr=5
- [ 183.427825] ld9040 get_gamma_value_from_bl >>> bl_value:86, gamma_value: 5.
- [ 183.427856] ld9040 brightness!!! bl_level=86, tune_level=5 curr=5
- [ 183.444763] ld9040 get_gamma_value_from_bl >>> bl_value:87, gamma_value: 5.
- [ 183.444793] ld9040 brightness!!! bl_level=87, tune_level=5 curr=5
- [ 183.483489]
- [ 183.483520] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.507629] fw_version 7:19:2012
- [ 183.507904] Securing...
- [ 183.508361] Failed to protect memory for heap mm - error code: -95
- [ 183.508544] ION heap secure failed heap id 8 rc -95
- [ 183.508666] Secure session operation failure
- [ 183.530731] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.545196] ld9040 get_gamma_value_from_bl >>> bl_value:91, gamma_value: 6.
- [ 183.545257] ld9040 brightness!!! bl_level=91, tune_level=6 curr=5
- [ 183.547271] ld9040 ea8868_gamma_ctl 6 6
- [ 183.578674] ld9040 get_gamma_value_from_bl >>> bl_value:92, gamma_value: 6.
- [ 183.578704] ld9040 brightness!!! bl_level=92, tune_level=6 curr=6
- [ 183.595306] ld9040 get_gamma_value_from_bl >>> bl_value:93, gamma_value: 6.
- [ 183.595336] ld9040 brightness!!! bl_level=93, tune_level=6 curr=6
- [ 183.628784] ld9040 get_gamma_value_from_bl >>> bl_value:94, gamma_value: 6.
- [ 183.628814] ld9040 brightness!!! bl_level=94, tune_level=6 curr=6
- [ 183.636840]
- [ 183.636871] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.645507] ld9040 get_gamma_value_from_bl >>> bl_value:95, gamma_value: 6.
- [ 183.645538] ld9040 brightness!!! bl_level=95, tune_level=6 curr=6
- [ 183.657501] fw_version 7:19:2012
- [ 183.657745] Securing...
- [ 183.658264] Failed to protect memory for heap mm - error code: -95
- [ 183.658386] ION heap secure failed heap id 8 rc -95
- [ 183.658569] Secure session operation failure
- [ 183.677276] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.679046] ld9040 get_gamma_value_from_bl >>> bl_value:96, gamma_value: 6.
- [ 183.679107] ld9040 brightness!!! bl_level=96, tune_level=6 curr=6
- [ 183.695861] ld9040 get_gamma_value_from_bl >>> bl_value:97, gamma_value: 6.
- [ 183.695922] ld9040 brightness!!! bl_level=97, tune_level=6 curr=6
- [ 183.729370] ld9040 get_gamma_value_from_bl >>> bl_value:98, gamma_value: 6.
- [ 183.729431] ld9040 brightness!!! bl_level=98, tune_level=6 curr=6
- [ 183.750518] ld9040 get_gamma_value_from_bl >>> bl_value:99, gamma_value: 6.
- [ 183.750549] ld9040 brightness!!! bl_level=99, tune_level=6 curr=6
- [ 183.781524] ld9040 get_gamma_value_from_bl >>> bl_value:100, gamma_value: 7.
- [ 183.781555] ld9040 brightness!!! bl_level=100, tune_level=7 curr=6
- [ 183.782989]
- [ 183.783020] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.787414] ld9040 ea8868_gamma_ctl 7 7
- [ 183.807556] fw_version 7:19:2012
- [ 183.807861] Securing...
- [ 183.808258] Failed to protect memory for heap mm - error code: -95
- [ 183.808441] ION heap secure failed heap id 8 rc -95
- [ 183.808563] Secure session operation failure
- [ 183.813598] ld9040 get_gamma_value_from_bl >>> bl_value:101, gamma_value: 7.
- [ 183.813659] ld9040 brightness!!! bl_level=101, tune_level=7 curr=7
- [ 183.827331] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.932098]
- [ 183.932098] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 183.939636] ld9040 get_gamma_value_from_bl >>> bl_value:106, gamma_value: 7.
- [ 183.939666] ld9040 brightness!!! bl_level=106, tune_level=7 curr=7
- [ 183.947479] fw_version 7:19:2012
- [ 183.947753] Securing...
- [ 183.948120] Failed to protect memory for heap mm - error code: -95
- [ 183.948303] ION heap secure failed heap id 8 rc -95
- [ 183.948425] Secure session operation failure
- [ 183.967285] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 183.972045] ld9040 get_gamma_value_from_bl >>> bl_value:107, gamma_value: 7.
- [ 183.972076] ld9040 brightness!!! bl_level=107, tune_level=7 curr=7
- [ 183.983825] ld9040 get_gamma_value_from_bl >>> bl_value:108, gamma_value: 7.
- [ 183.983886] ld9040 brightness!!! bl_level=108, tune_level=7 curr=7
- [ 183.998046] ld9040 get_gamma_value_from_bl >>> bl_value:109, gamma_value: 7.
- [ 183.998077] ld9040 brightness!!! bl_level=109, tune_level=7 curr=7
- [ 184.009002] rmt_storage_event_open_cb: open callback received
- [ 184.009124] open partition /q6_fs1_parti_id_0x59 handle=4
- [ 184.013031] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received
- [ 184.014556] ld9040 get_gamma_value_from_bl >>> bl_value:110, gamma_value: 8.
- [ 184.014587]
- [ 184.014801] sdio_al:ch SDIO_SMEM read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120
- [ 184.015075] ld9040 brightness!!! bl_level=110, tune_level=8 curr=7
- [ 184.015258] sdio_al:sdio_open SDIO_SMEM completed OK
- [ 184.017059] ld9040 ea8868_gamma_ctl 8 8
- [ 184.017822] rmt_storage_event_user_data_cb: send user data callback received
- [ 184.019165] rmt_storage_event_open_cb: open callback received
- [ 184.019348] open partition /q6_fs2_parti_id_0x5A handle=5
- [ 184.020660] rmt_storage_event_user_data_cb: send user data callback received
- [ 184.021911] rmt_storage_event_open_cb: open callback received
- [ 184.022033] open partition /q6_fsg_parti_id_0x5B handle=6
- [ 184.025115] rmt_storage_event_user_data_cb: send user data callback received
- [ 184.048370] ld9040 get_gamma_value_from_bl >>> bl_value:111, gamma_value: 8.
- [ 184.048400] ld9040 brightness!!! bl_level=111, tune_level=8 curr=8
- [ 184.065063] ld9040 get_gamma_value_from_bl >>> bl_value:112, gamma_value: 8.
- [ 184.065093] ld9040 brightness!!! bl_level=112, tune_level=8 curr=8
- [ 184.072387]
- [ 184.072387] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.087493] fw_version 7:19:2012
- [ 184.087921] Securing...
- [ 184.088317] Failed to protect memory for heap mm - error code: -95
- [ 184.088500] ION heap secure failed heap id 8 rc -95
- [ 184.088623] Secure session operation failure
- [ 184.098205] ld9040 get_gamma_value_from_bl >>> bl_value:113, gamma_value: 8.
- [ 184.098236] ld9040 brightness!!! bl_level=113, tune_level=8 curr=8
- [ 184.107269] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.115386] ld9040 get_gamma_value_from_bl >>> bl_value:114, gamma_value: 8.
- [ 184.115447] ld9040 brightness!!! bl_level=114, tune_level=8 curr=8
- [ 184.127777] rmt_storage_event_write_iovec_cb: write iovec callback received
- [ 184.212127]
- [ 184.212127] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.227539] fw_version 7:19:2012
- [ 184.227783] Securing...
- [ 184.228149] Failed to protect memory for heap mm - error code: -95
- [ 184.228332] ION heap secure failed heap id 8 rc -95
- [ 184.228454] Secure session operation failure
- [ 184.247161] p2p0: no IPv6 routers present
- [ 184.247222] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.321197] ld9040 get_gamma_value_from_bl >>> bl_value:115, gamma_value: 8.
- [ 184.321228] ld9040 brightness!!! bl_level=115, tune_level=8 curr=8
- [ 184.321990] ld9040 get_gamma_value_from_bl >>> bl_value:122, gamma_value: 9.
- [ 184.322021] ld9040 brightness!!! bl_level=122, tune_level=9 curr=8
- [ 184.324066] ld9040 ea8868_gamma_ctl 9 9
- [ 184.351623]
- [ 184.351623] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.367462] fw_version 7:19:2012
- [ 184.367797] Securing...
- [ 184.368164] Failed to protect memory for heap mm - error code: -95
- [ 184.368286] ION heap secure failed heap id 8 rc -95
- [ 184.368469] Secure session operation failure
- [ 184.387207] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.491760]
- [ 184.491760] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.507507] fw_version 7:19:2012
- [ 184.507781] Securing...
- [ 184.508148] Failed to protect memory for heap mm - error code: -95
- [ 184.508331] ION heap secure failed heap id 8 rc -95
- [ 184.508422] Secure session operation failure
- [ 184.527252] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.631896]
- [ 184.631896] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.647460] fw_version 7:19:2012
- [ 184.647735] Securing...
- [ 184.648162] Failed to protect memory for heap mm - error code: -95
- [ 184.648284] ION heap secure failed heap id 8 rc -95
- [ 184.648468] Secure session operation failure
- [ 184.667266] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.771850]
- [ 184.771850] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.787475] fw_version 7:19:2012
- [ 184.787719] Securing...
- [ 184.788116] Failed to protect memory for heap mm - error code: -95
- [ 184.788299] ION heap secure failed heap id 8 rc -95
- [ 184.788421] Secure session operation failure
- [ 184.796997] rmt_storage_ioctl: send status ioctl
- [ 184.807250] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.911773]
- [ 184.911804] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 184.927490] fw_version 7:19:2012
- [ 184.927795] Securing...
- [ 184.928222] Failed to protect memory for heap mm - error code: -95
- [ 184.928344] ION heap secure failed heap id 8 rc -95
- [ 184.928527] Secure session operation failure
- [ 184.948730] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 184.993103] ld9040 get_gamma_value_from_bl >>> bl_value:148, gamma_value: 11.
- [ 184.993164] ld9040 brightness!!! bl_level=148, tune_level=11 curr=9
- [ 184.995025] ld9040 ea8868_gamma_ctl 11 11
- [ 185.003143] ld9040 get_gamma_value_from_bl >>> bl_value:149, gamma_value: 11.
- [ 185.003173] ld9040 brightness!!! bl_level=149, tune_level=11 curr=11
- [ 185.019958] ld9040 get_gamma_value_from_bl >>> bl_value:150, gamma_value: 12.
- [ 185.019989] ld9040 brightness!!! bl_level=150, tune_level=12 curr=11
- [ 185.021881] ld9040 ea8868_gamma_ctl 12 12
- [ 185.053558]
- [ 185.053558] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.054229] ld9040 get_gamma_value_from_bl >>> bl_value:151, gamma_value: 12.
- [ 185.054260] ld9040 brightness!!! bl_level=151, tune_level=12 curr=12
- [ 185.070251] ld9040 get_gamma_value_from_bl >>> bl_value:152, gamma_value: 12.
- [ 185.070312] ld9040 brightness!!! bl_level=152, tune_level=12 curr=12
- [ 185.077514] fw_version 7:19:2012
- [ 185.077880] Securing...
- [ 185.078460] Failed to protect memory for heap mm - error code: -95
- [ 185.078643] ION heap secure failed heap id 8 rc -95
- [ 185.078765] Secure session operation failure
- [ 185.097259] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 185.103759] ld9040 get_gamma_value_from_bl >>> bl_value:153, gamma_value: 12.
- [ 185.103790] ld9040 brightness!!! bl_level=153, tune_level=12 curr=12
- [ 185.120483] ld9040 get_gamma_value_from_bl >>> bl_value:154, gamma_value: 12.
- [ 185.120544] ld9040 brightness!!! bl_level=154, tune_level=12 curr=12
- [ 185.153808] ld9040 get_gamma_value_from_bl >>> bl_value:155, gamma_value: 12.
- [ 185.153839] ld9040 brightness!!! bl_level=155, tune_level=12 curr=12
- [ 185.170837] ld9040 get_gamma_value_from_bl >>> bl_value:156, gamma_value: 12.
- [ 185.170898] ld9040 brightness!!! bl_level=156, tune_level=12 curr=12
- [ 185.201843]
- [ 185.201843] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.204162] ld9040 get_gamma_value_from_bl >>> bl_value:157, gamma_value: 12.
- [ 185.204193] ld9040 brightness!!! bl_level=157, tune_level=12 curr=12
- [ 185.217468] fw_version 7:19:2012
- [ 185.217712] Securing...
- [ 185.218078] Failed to protect memory for heap mm - error code: -95
- [ 185.218261] ION heap secure failed heap id 8 rc -95
- [ 185.218383] Secure session operation failure
- [ 185.220947] ld9040 get_gamma_value_from_bl >>> bl_value:158, gamma_value: 12.
- [ 185.220977] ld9040 brightness!!! bl_level=158, tune_level=12 curr=12
- [ 185.237243] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 185.254394] ld9040 get_gamma_value_from_bl >>> bl_value:159, gamma_value: 12.
- [ 185.254425] ld9040 brightness!!! bl_level=159, tune_level=12 curr=12
- [ 185.271057] ld9040 get_gamma_value_from_bl >>> bl_value:160, gamma_value: 13.
- [ 185.271087] ld9040 brightness!!! bl_level=160, tune_level=13 curr=12
- [ 185.272979] ld9040 ea8868_gamma_ctl 13 13
- [ 185.304504] ld9040 get_gamma_value_from_bl >>> bl_value:161, gamma_value: 13.
- [ 185.304534] ld9040 brightness!!! bl_level=161, tune_level=13 curr=13
- [ 185.321533] ld9040 get_gamma_value_from_bl >>> bl_value:162, gamma_value: 13.
- [ 185.321594] ld9040 brightness!!! bl_level=162, tune_level=13 curr=13
- [ 185.339477] ld9040 get_gamma_value_from_bl >>> bl_value:163, gamma_value: 13.
- [ 185.339508] ld9040 brightness!!! bl_level=163, tune_level=13 curr=13
- [ 185.341796]
- [ 185.341827] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.357452] fw_version 7:19:2012
- [ 185.357727] Securing...
- [ 185.358093] Failed to protect memory for heap mm - error code: -95
- [ 185.358276] ION heap secure failed heap id 8 rc -95
- [ 185.358367] Secure session operation failure
- [ 185.371795] ld9040 get_gamma_value_from_bl >>> bl_value:164, gamma_value: 13.
- [ 185.371826] ld9040 brightness!!! bl_level=164, tune_level=13 curr=13
- [ 185.377288] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 185.388488] ld9040 get_gamma_value_from_bl >>> bl_value:165, gamma_value: 13.
- [ 185.388549] ld9040 brightness!!! bl_level=165, tune_level=13 curr=13
- [ 185.421875] ld9040 get_gamma_value_from_bl >>> bl_value:166, gamma_value: 13.
- [ 185.421905] ld9040 brightness!!! bl_level=166, tune_level=13 curr=13
- [ 185.438659] ld9040 get_gamma_value_from_bl >>> bl_value:167, gamma_value: 13.
- [ 185.438690] ld9040 brightness!!! bl_level=167, tune_level=13 curr=13
- [ 185.472106] ld9040 get_gamma_value_from_bl >>> bl_value:168, gamma_value: 13.
- [ 185.472137] ld9040 brightness!!! bl_level=168, tune_level=13 curr=13
- [ 185.481842]
- [ 185.481872] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.489074] ld9040 get_gamma_value_from_bl >>> bl_value:169, gamma_value: 13.
- [ 185.489105] ld9040 brightness!!! bl_level=169, tune_level=13 curr=13
- [ 185.497467] fw_version 7:19:2012
- [ 185.497741] Securing...
- [ 185.498138] Failed to protect memory for heap mm - error code: -95
- [ 185.498321] ION heap secure failed heap id 8 rc -95
- [ 185.498413] Secure session operation failure
- [ 185.517272] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 185.522674] ld9040 get_gamma_value_from_bl >>> bl_value:170, gamma_value: 14.
- [ 185.522735] ld9040 brightness!!! bl_level=170, tune_level=14 curr=13
- [ 185.524597] ld9040 ea8868_gamma_ctl 14 14
- [ 185.539367] ld9040 get_gamma_value_from_bl >>> bl_value:171, gamma_value: 14.
- [ 185.539398] ld9040 brightness!!! bl_level=171, tune_level=14 curr=14
- [ 185.573028] ld9040 get_gamma_value_from_bl >>> bl_value:172, gamma_value: 14.
- [ 185.573059] ld9040 brightness!!! bl_level=172, tune_level=14 curr=14
- [ 185.589721] ld9040 get_gamma_value_from_bl >>> bl_value:173, gamma_value: 14.
- [ 185.589782] ld9040 brightness!!! bl_level=173, tune_level=14 curr=14
- [ 185.621856]
- [ 185.621856] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.623992] ld9040 get_gamma_value_from_bl >>> bl_value:174, gamma_value: 14.
- [ 185.624053] ld9040 brightness!!! bl_level=174, tune_level=14 curr=14
- [ 185.637481] fw_version 7:19:2012
- [ 185.637817] Securing...
- [ 185.638183] Failed to protect memory for heap mm - error code: -95
- [ 185.638305] ION heap secure failed heap id 8 rc -95
- [ 185.638488] Secure session operation failure
- [ 185.640106] ld9040 get_gamma_value_from_bl >>> bl_value:175, gamma_value: 14.
- [ 185.640167] ld9040 brightness!!! bl_level=175, tune_level=14 curr=14
- [ 185.657257] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 185.673461] ld9040 get_gamma_value_from_bl >>> bl_value:176, gamma_value: 14.
- [ 185.673492] ld9040 brightness!!! bl_level=176, tune_level=14 curr=14
- [ 185.690124] ld9040 get_gamma_value_from_bl >>> bl_value:177, gamma_value: 14.
- [ 185.690155] ld9040 brightness!!! bl_level=177, tune_level=14 curr=14
- [ 185.723541] ld9040 get_gamma_value_from_bl >>> bl_value:178, gamma_value: 14.
- [ 185.723571] ld9040 brightness!!! bl_level=178, tune_level=14 curr=14
- [ 185.740325] ld9040 get_gamma_value_from_bl >>> bl_value:179, gamma_value: 14.
- [ 185.740356] ld9040 brightness!!! bl_level=179, tune_level=14 curr=14
- [ 185.761871]
- [ 185.761871] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.774047] ld9040 get_gamma_value_from_bl >>> bl_value:180, gamma_value: 15.
- [ 185.774078] ld9040 brightness!!! bl_level=180, tune_level=15 curr=14
- [ 185.775939] ld9040 ea8868_gamma_ctl 15 15
- [ 185.787475] fw_version 7:19:2012
- [ 185.787780] Securing...
- [ 185.788146] Failed to protect memory for heap mm - error code: -95
- [ 185.788269] ION heap secure failed heap id 8 rc -95
- [ 185.788452] Secure session operation failure
- [ 185.790802] ld9040 get_gamma_value_from_bl >>> bl_value:181, gamma_value: 15.
- [ 185.790863] ld9040 brightness!!! bl_level=181, tune_level=15 curr=15
- [ 185.807250] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 185.824157] ld9040 get_gamma_value_from_bl >>> bl_value:182, gamma_value: 15.
- [ 185.824218] ld9040 brightness!!! bl_level=182, tune_level=15 curr=15
- [ 185.911834]
- [ 185.911834] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 185.927490] fw_version 7:19:2012
- [ 185.927734] Securing...
- [ 185.928161] Failed to protect memory for heap mm - error code: -95
- [ 185.928283] ION heap secure failed heap id 8 rc -95
- [ 185.928466] Secure session operation failure
- [ 185.947235] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.051818]
- [ 186.051849] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.067535] fw_version 7:19:2012
- [ 186.067810] Securing...
- [ 186.068145] Failed to protect memory for heap mm - error code: -95
- [ 186.068328] ION heap secure failed heap id 8 rc -95
- [ 186.068450] Secure session operation failure
- [ 186.087280] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.192718]
- [ 186.192749] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.207489] fw_version 7:19:2012
- [ 186.207763] Securing...
- [ 186.208129] Failed to protect memory for heap mm - error code: -95
- [ 186.208374] ION heap secure failed heap id 8 rc -95
- [ 186.208465] Secure session operation failure
- [ 186.227478] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.332061]
- [ 186.332061] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.347503] fw_version 7:19:2012
- [ 186.347900] Securing...
- [ 186.348266] Failed to protect memory for heap mm - error code: -95
- [ 186.348388] ION heap secure failed heap id 8 rc -95
- [ 186.348571] Secure session operation failure
- [ 186.367309] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.472045]
- [ 186.472076] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.488220] fw_version 7:19:2012
- [ 186.488525] Securing...
- [ 186.488922] Failed to protect memory for heap mm - error code: -95
- [ 186.489105] ION heap secure failed heap id 8 rc -95
- [ 186.489227] Secure session operation failure
- [ 186.507263] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.612213]
- [ 186.612213] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.627593] fw_version 7:19:2012
- [ 186.627899] Securing...
- [ 186.628356] Failed to protect memory for heap mm - error code: -95
- [ 186.628479] ION heap secure failed heap id 8 rc -95
- [ 186.628662] Secure session operation failure
- [ 186.647277] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.751831]
- [ 186.751861] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.767486] fw_version 7:19:2012
- [ 186.767761] Securing...
- [ 186.768371] Failed to protect memory for heap mm - error code: -95
- [ 186.768554] ION heap secure failed heap id 8 rc -95
- [ 186.768676] Secure session operation failure
- [ 186.787261] ion_iommu_delayed_unmap: Virtual memory address leak in domain 0, partition 0
- [ 186.843872] msm_vidc_dec: Inside vid_dec_open()
- [ 186.844848]
- [ 186.844848] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.867492] fw_version 7:19:2012
- [ 186.868835] msm_vidc_dec: Inside vid_dec_release()
- [ 186.890716] msm_vidc_dec: Return from vid_dec_release()
- [ 186.892547] msm_vidc_dec: Inside vid_dec_open()
- [ 186.893737]
- [ 186.893737] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.917510] fw_version 7:19:2012
- [ 186.918792] msm_vidc_dec: Inside vid_dec_release()
- [ 186.940673] msm_vidc_dec: Return from vid_dec_release()
- [ 186.941955] msm_vidc_dec: Inside vid_dec_open()
- [ 186.942962]
- [ 186.942962] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 186.977478] fw_version 7:19:2012
- [ 186.978851] msm_vidc_dec: Inside vid_dec_release()
- [ 187.000946] msm_vidc_dec: Return from vid_dec_release()
- [ 187.002227] msm_vidc_dec: Inside vid_dec_open()
- [ 187.003387]
- [ 187.003387] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 187.037475] fw_version 7:19:2012
- [ 187.038940] msm_vidc_dec: Inside vid_dec_release()
- [ 187.060668] msm_vidc_dec: Return from vid_dec_release()
- [ 187.062164] msm_vidc_dec: Inside vid_dec_open()
- [ 187.063201]
- [ 187.063201] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 187.087463] fw_version 7:19:2012
- [ 187.088317] msm_vidc_dec: Inside vid_dec_release()
- [ 187.110687] msm_vidc_dec: Return from vid_dec_release()
- [ 187.111816] msm_vidc_dec: Inside vid_dec_open()
- [ 187.112823]
- [ 187.112823] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 187.137542] fw_version 7:19:2012
- [ 187.138000] msm_vidc_dec: Inside vid_dec_release()
- [ 187.160705] msm_vidc_dec: Return from vid_dec_release()
- [ 187.161834] msm_vidc_dec: Inside vid_dec_open()
- [ 187.162902]
- [ 187.162902] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
- [ 187.177459] fw_version 7:19:2012
- [ 187.177795] msm_vidc_dec: Inside vid_dec_release()
- [ 187.200744] msm_vidc_dec: Return from vid_dec_release()CPU1: Booted secondary processor
- [ 192.729675] CPU1: Booted secondary processor
- [ 194.739624] CPU1: Booted secondary processor
- [ 197.489624] CPU1: Booted secondary processor
- [ 198.829620] CPU1: Booted secondary processor
- [ 199.680053] CPU1: Booted secondary processor
- [ 200.380859] CPU1: Booted secondary processor
- [ 201.329559] CPU1: Booted secondary processor
- [ 202.129669] CPU1: Booted secondary processor
- [ 204.029693] CPU1: Booted secondary processor
- [ 204.518981] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
- [ 204.520507] [VIBETONZ] DISABLE
- [ 205.847625] sec_bat_measure_work: adc work already on a queue
- [ 205.861877] healthd: battery [l=64 v=3771 t=29.0 h=2 st=3] dock-battery none chg=
- [ 207.749664] CPU1: Booted secondary processor
- [ 211.399658] CPU1: Booted secondary processor
- [ 212.250213] CPU1: Booted secondary processor
- [ 212.800140] CPU1: Booted secondary processor
- [ 213.799652] CPU1: Booted secondary processor
- [ 214.949645] CPU1: Booted secondary processor
- [ 216.139587] CPU1: Booted secondary processor
- [ 217.298614] [TSP] ID-0,UD:1
- [ 217.323425] [TSP] t: 4, a: 0
- [ 217.328887] [TSP] ID-0,UD:2
- [ 217.350921] [TSP] t: 0, a: 0
- [ 217.351470] [TSP] calibration was not decided yet
- [ 217.371490] [TSP] ID-0,UD:0
- [ 217.699951] [TSP] ID-0,UD:1
- [ 217.724670] [TSP] t: 2, a: 0
- [ 217.820129] [TSP] ID-0,UD:2
- [ 217.844818] [TSP] t: 2, a: 0
- [ 217.846893] [TSP] ID-0,UD:2
- [ 217.868927] [TSP] t: 2, a: 0
- [ 217.870941] [TSP] ID-0,UD:2
- [ 217.892974] [TSP] t: 2, a: 0
- [ 217.895050] [TSP] ID-0,UD:2
- [ 217.919830] [TSP] t: 2, a: 0
- [ 217.921844] [TSP] ID-0,UD:2
- [ 217.943908] [TSP] t: 2, a: 0
- [ 217.945983] [TSP] ID-0,UD:2
- [ 217.968048] [TSP] t: 2, a: 0
- [ 217.970062] [TSP] ID-0,UD:2
- [ 217.992156] [TSP] t: 1, a: 0
- [ 217.994232] [TSP] ID-0,UD:2
- [ 218.016296] [TSP] t: 1, a: 0
- [ 218.018341] [TSP] ID-0,UD:2
- [ 218.040405] [TSP] t: 0, a: 0
- [ 218.040985] [TSP] calibration was not decided yet
- [ 218.042541] [TSP] ID-0,UD:2
- [ 218.064636] [TSP] t: 0, a: 0
- [ 218.065216] [TSP] calibration was not decided yet
- [ 218.066802] [TSP] ID-0,UD:0
- [ 218.307342] [TSP] ID-0,UD:1
- [ 218.329467] [TSP] t: 0, a: 0
- [ 218.329986] [TSP] calibration was not decided yet
- [ 218.349945] [TSP] ID-0,UD:0
- [ 218.462371] [TSP] ID-0,UD:1
- [ 218.487182] [TSP] t: 10, a: 0
- [ 218.489196] [TSP] ID-0,UD:2
- [ 218.511291] [TSP] t: 11, a: 0
- [ 218.513549] [TSP] ID-0,UD:2
- [ 218.535919] [TSP] t: 10, a: 0
- [ 218.537902] [TSP] ID-0,UD:2
- [ 218.562652] [TSP] t: 6, a: 0
- [ 218.564666] [TSP] ID-0,UD:2
- [ 218.586883] [TSP] t: 6, a: 0
- [ 218.588928] [TSP] ID-0,UD:2
- [ 218.610992] [TSP] t: 7, a: 0
- [ 218.613037] [TSP] ID-0,UD:2
- [ 218.635192] [TSP] t: 6, a: 0
- [ 218.637237] [TSP] ID-0,UD:2
- [ 218.659606] [TSP] t: 2, a: 0
- [ 218.661651] [TSP] ID-0,UD:2
- [ 218.686431] [TSP] t: 0, a: 0
- [ 218.686981] [TSP] calibration was not decided yet
- [ 218.688568] [TSP] ID-0,UD:2
- [ 218.710815] [TSP] t: 0, a: 0
- [ 218.711334] [TSP] calibration was not decided yet
- [ 218.712921] [TSP] ID-0,UD:0
- [ 219.131286] [TSP] ID-0,UD:1
- [ 219.156005] [TSP] t: 3, a: 0
- [ 219.219146] [TSP] ID-0,UD:0
- [ 219.374328] [TSP] ID-0,UD:1
- [ 219.399169] [TSP] t: 2, a: 0
- [ 219.732940] [TSP] ID-0,UD:0
- [ 223.149688] CPU1: Booted secondary processor
- [ 223.939605] CPU1: Booted secondary processor
- [ 224.742187] CPU1: Booted secondary processor
- [ 225.440551] CPU1: Booted secondary processor
- [ 227.460205] CPU1: Booted secondary processor
- [ 228.490234] CPU1: Booted secondary processor
- [ 232.310607] CPU1: Booted secondary processor
- [ 232.959869] CPU1: Booted secondary processor
- [ 235.059631] CPU1: Booted secondary processor
- [ 235.959594] CPU1: Booted secondary processor
- [ 238.550323] [LIGHT SENSOR] lux up 0x335 (821)
- [ 239.299621] CPU1: Booted secondary processor
- [ 240.679565] CPU1: Booted secondary processor
- [ 241.840911] k3dh_read_accel_xyz: data=(233, 425, 898) cal=(-8, 8, -10)
- [ 242.029785] CPU1: Booted secondary processor
- [ 244.209594] CPU1: Booted secondary processor
- [ 245.975494] healthd: battery [l=64 v=3788 t=30.0 h=2 st=3] dock-battery none chg=
- [ 246.219604] CPU1: Booted secondary processor
- [ 247.071258] CPU1: Booted secondary processor
- [ 248.279998] CPU1: Booted secondary processor
- [ 249.971221] CPU1: Booted secondary processor
- [ 251.669860] CPU1: Booted secondary processor
- [ 252.779663] CPU1: Booted secondary processor
- [ 253.469085] ld9040 get_gamma_value_from_bl >>> bl_value:181, gamma_value: 15.
- [ 253.469116] ld9040 brightness!!! bl_level=181, tune_level=15 curr=15
- [ 253.485626] ld9040 get_gamma_value_from_bl >>> bl_value:177, gamma_value: 14.
- [ 253.485656] ld9040 brightness!!! bl_level=177, tune_level=14 curr=15
- [ 253.487731] ld9040 ea8868_gamma_ctl 14 14
- [ 253.502380] ld9040 get_gamma_value_from_bl >>> bl_value:174, gamma_value: 14.
- [ 253.502410] ld9040 brightness!!! bl_level=174, tune_level=14 curr=14
- [ 253.519165] ld9040 get_gamma_value_from_bl >>> bl_value:171, gamma_value: 14.
- [ 253.519226] ld9040 brightness!!! bl_level=171, tune_level=14 curr=14
- [ 253.537872] ld9040 get_gamma_value_from_bl >>> bl_value:167, gamma_value: 13.
- [ 253.537994] ld9040 brightness!!! bl_level=167, tune_level=13 curr=14
- [ 253.542175] ld9040 ea8868_gamma_ctl 13 13
- [ 253.554595] ld9040 get_gamma_value_from_bl >>> bl_value:164, gamma_value: 13.
- [ 253.554687] ld9040 brightness!!! bl_level=164, tune_level=13 curr=13
- [ 253.571472] ld9040 get_gamma_value_from_bl >>> bl_value:161, gamma_value: 13.
- [ 253.571563] ld9040 brightness!!! bl_level=161, tune_level=13 curr=13
- [ 253.587982] ld9040 get_gamma_value_from_bl >>> bl_value:157, gamma_value: 12.
- [ 253.588104] ld9040 brightness!!! bl_level=157, tune_level=12 curr=13
- [ 253.595275] ld9040 ea8868_gamma_ctl 12 12
- [ 253.604705] ld9040 get_gamma_value_from_bl >>> bl_value:154, gamma_value: 12.
- [ 253.604797] ld9040 brightness!!! bl_level=154, tune_level=12 curr=12
- [ 253.621765] ld9040 get_gamma_value_from_bl >>> bl_value:151, gamma_value: 12.
- [ 253.621856] ld9040 brightness!!! bl_level=151, tune_level=12 curr=12
- [ 253.638244] ld9040 get_gamma_value_from_bl >>> bl_value:147, gamma_value: 11.
- [ 253.638366] ld9040 brightness!!! bl_level=147, tune_level=11 curr=12
- [ 253.646118] ld9040 ea8868_gamma_ctl 11 11
- [ 253.655029] ld9040 get_gamma_value_from_bl >>> bl_value:144, gamma_value: 11.
- [ 253.655151] ld9040 brightness!!! bl_level=144, tune_level=11 curr=11
- [ 253.671844] ld9040 get_gamma_value_from_bl >>> bl_value:141, gamma_value: 11.
- [ 253.671936] ld9040 brightness!!! bl_level=141, tune_level=11 curr=11
- [ 253.688537] ld9040 get_gamma_value_from_bl >>> bl_value:137, gamma_value: 10.
- [ 253.688659] ld9040 brightness!!! bl_level=137, tune_level=10 curr=11
- [ 253.696105] ld9040 ea8868_gamma_ctl 10 10
- [ 253.705444] ld9040 get_gamma_value_from_bl >>> bl_value:134, gamma_value: 10.
- [ 253.705535] ld9040 brightness!!! bl_level=134, tune_level=10 curr=10
- [ 253.722412] ld9040 get_gamma_value_from_bl >>> bl_value:131, gamma_value: 10.
- [ 253.722503] ld9040 brightness!!! bl_level=131, tune_level=10 curr=10
- [ 253.737213] ld9040 get_gamma_value_from_bl >>> bl_value:127, gamma_value: 9.
- [ 253.737243] ld9040 brightness!!! bl_level=127, tune_level=9 curr=10
- [ 253.739135] ld9040 ea8868_gamma_ctl 9 9
- [ 253.753906] ld9040 get_gamma_value_from_bl >>> bl_value:124, gamma_value: 9.
- [ 253.753936] ld9040 brightness!!! bl_level=124, tune_level=9 curr=9
- [ 253.770568] ld9040 get_gamma_value_from_bl >>> bl_value:121, gamma_value: 9.
- [ 253.770599] ld9040 brightness!!! bl_level=121, tune_level=9 curr=9
- [ 253.787292] ld9040 get_gamma_value_from_bl >>> bl_value:117, gamma_value: 8.
- [ 253.787353] ld9040 brightness!!! bl_level=117, tune_level=8 curr=9
- [ 253.789215] ld9040 ea8868_gamma_ctl 8 8
- [ 253.804046] ld9040 get_gamma_value_from_bl >>> bl_value:114, gamma_value: 8.
- [ 253.804077] ld9040 brightness!!! bl_level=114, tune_level=8 curr=8
- [ 253.822692] ld9040 get_gamma_value_from_bl >>> bl_value:110, gamma_value: 8.
- [ 253.822814] ld9040 brightness!!! bl_level=110, tune_level=8 curr=8
- [ 253.839447] ld9040 get_gamma_value_from_bl >>> bl_value:107, gamma_value: 7.
- [ 253.839569] ld9040 brightness!!! bl_level=107, tune_level=7 curr=8
- [ 253.843505] ld9040 ea8868_gamma_ctl 7 7
- [ 253.856048] ld9040 get_gamma_value_from_bl >>> bl_value:104, gamma_value: 7.
- [ 253.856140] ld9040 brightness!!! bl_level=104, tune_level=7 curr=7
- [ 253.873229] ld9040 get_gamma_value_from_bl >>> bl_value:100, gamma_value: 7.
- [ 253.873321] ld9040 brightness!!! bl_level=100, tune_level=7 curr=7
- [ 253.890167] ld9040 get_gamma_value_from_bl >>> bl_value:97, gamma_value: 6.
- [ 253.890258] ld9040 brightness!!! bl_level=97, tune_level=6 curr=7
- [ 253.894226] ld9040 ea8868_gamma_ctl 6 6
- [ 253.906036] ld9040 get_gamma_value_from_bl >>> bl_value:94, gamma_value: 6.
- [ 253.906066] ld9040 brightness!!! bl_level=94, tune_level=6 curr=6
- [ 253.921600] ld9040 get_gamma_value_from_bl >>> bl_value:90, gamma_value: 6.
- [ 253.921630] ld9040 brightness!!! bl_level=90, tune_level=6 curr=6
- [ 253.946166] ld9040 get_gamma_value_from_bl >>> bl_value:87, gamma_value: 5.
- [ 253.946197] ld9040 brightness!!! bl_level=87, tune_level=5 curr=6
- [ 253.948150] ld9040 ea8868_gamma_ctl 5 5
- [ 253.957977] ld9040 get_gamma_value_from_bl >>> bl_value:84, gamma_value: 5.
- [ 253.958038] ld9040 brightness!!! bl_level=84, tune_level=5 curr=5
- [ 253.974639] ld9040 get_gamma_value_from_bl >>> bl_value:80, gamma_value: 5.
- [ 253.974670] ld9040 brightness!!! bl_level=80, tune_level=5 curr=5
- [ 253.991394] ld9040 get_gamma_value_from_bl >>> bl_value:77, gamma_value: 4.
- [ 253.991424] ld9040 brightness!!! bl_level=77, tune_level=4 curr=5
- [ 253.993316] ld9040 ea8868_gamma_ctl 4 4
- [ 254.008422] ld9040 get_gamma_value_from_bl >>> bl_value:74, gamma_value: 4.
- [ 254.008453] ld9040 brightness!!! bl_level=74, tune_level=4 curr=4
- [ 254.024932] ld9040 get_gamma_value_from_bl >>> bl_value:70, gamma_value: 4.
- [ 254.024993] ld9040 brightness!!! bl_level=70, tune_level=4 curr=4
- [ 254.049438] ld9040 get_gamma_value_from_bl >>> bl_value:67, gamma_value: 3.
- [ 254.049468] ld9040 brightness!!! bl_level=67, tune_level=3 curr=4
- [ 254.051330] ld9040 ea8868_gamma_ctl 3 3
- [ 254.059875] CPU1: Booted secondary processor
- [ 254.061340] ld9040 get_gamma_value_from_bl >>> bl_value:64, gamma_value: 3.
- [ 254.061401] ld9040 brightness!!! bl_level=64, tune_level=3 curr=3
- [ 254.072937] ld9040 get_gamma_value_from_bl >>> bl_value:60, gamma_value: 3.
- [ 254.073028] ld9040 brightness!!! bl_level=60, tune_level=3 curr=3
- [ 254.089233] ld9040 get_gamma_value_from_bl >>> bl_value:57, gamma_value: 2.
- [ 254.089294] ld9040 brightness!!! bl_level=57, tune_level=2 curr=3
- [ 254.091156] ld9040 ea8868_gamma_ctl 2 2
- [ 254.106018] ld9040 get_gamma_value_from_bl >>> bl_value:53, gamma_value: 2.
- [ 254.106048] ld9040 brightness!!! bl_level=53, tune_level=2 curr=2
- [ 254.123779] ld9040 get_gamma_value_from_bl >>> bl_value:50, gamma_value: 2.
- [ 254.123809] ld9040 brightness!!! bl_level=50, tune_level=2 curr=2
- [ 254.140533] ld9040 get_gamma_value_from_bl >>> bl_value:47, gamma_value: 1.
- [ 254.140594] ld9040 brightness!!! bl_level=47, tune_level=1 curr=2
- [ 254.141296] ld9040 ACL_cutoff_set Percentage : off!!
- [ 254.142730] ld9040 ea8868_gamma_ctl 1 1
- [ 254.159027] ld9040 get_gamma_value_from_bl >>> bl_value:43, gamma_value: 1.
- [ 254.159088] ld9040 brightness!!! bl_level=43, tune_level=1 curr=1
- [ 254.173736] ld9040 get_gamma_value_from_bl >>> bl_value:40, gamma_value: 1.
- [ 254.173828] ld9040 brightness!!! bl_level=40, tune_level=1 curr=1
- [ 254.190582] ld9040 get_gamma_value_from_bl >>> bl_value:37, gamma_value: 0.
- [ 254.190643] ld9040 brightness!!! bl_level=37, tune_level=0 curr=1
- [ 254.192108] ld9040 if bl_value is 0 or 1, acl_on skipped
- [ 254.195037] ld9040 ea8868_gamma_ctl 0 0
- [ 254.209716] ld9040 get_gamma_value_from_bl >>> bl_value:33, gamma_value: 0.
- [ 254.209808] ld9040 brightness!!! bl_level=33, tune_level=0 curr=0
- [ 254.223754] ld9040 get_gamma_value_from_bl >>> bl_value:30, gamma_value: 0.
- [ 254.223815] ld9040 brightness!!! bl_level=30, tune_level=0 curr=0
- [ 254.241851] ld9040 get_gamma_value_from_bl >>> bl_value:27, gamma_value: 0.
- [ 254.241912] ld9040 brightness!!! bl_level=27, tune_level=0 curr=0
- [ 254.259857] ld9040 get_gamma_value_from_bl >>> bl_value:23, gamma_value: 0.
- [ 254.259918] ld9040 brightness!!! bl_level=23, tune_level=0 curr=0
- [ 254.275726] ld9040 get_gamma_value_from_bl >>> bl_value:20, gamma_value: 0.
- [ 254.275817] ld9040 brightness!!! bl_level=20, tune_level=0 curr=0
- [ 254.958801] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
- [ 255.059814] CPU1: Booted secondary processor
- [ 255.566497] ld9040 get_gamma_value_from_bl >>> bl_value:0, gamma_value: 0.
- [ 255.566558] ld9040 brightness!!! bl_level=0, tune_level=0 curr=0
- [ 255.600097] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
- [ 255.600158] ld9040 lcdc_ld9040_panel_off + (1,1,1)
- [ 255.737182] ld9040 : lcdc_config_gpios [0]
- [ 255.737213] ld9040 start ld9040_disp_powerdown
- [ 255.737243] ld9040 lcdc_ld9040_panel_off -
- [ 255.737274] [kmj] lcdc_LD9040_panel_power:enable:0
- [ 255.808380] request_suspend_state: sleep (0->3) at 255781234870 (2015-09-30 12:40:10.948122733 UTC)
- [ 255.808593] early_suspend: begin
- [ 255.808685] early_suspend: kworker/u:3
- [ 255.808837] early_suspend: call handlers
- [ 255.808959] early_suspend: calling ledtrig_sleep_early_suspend
- [ 255.809143] early_suspend: calling sec_touchkey_early_suspend
- [ 255.809265] sec_touchkey_early_suspend
- [ 255.809356] early_suspend: calling ld9040_early_suspend
- [ 255.809539] ld9040 panel off at early_suspend (0,0,0)
- [ 255.809631] early_suspend: calling ebln_early_suspend
- [ 255.809844] early_suspend: calling dhd_early_suspend
- [ 255.809936] dhd_early_suspend: enter
- [ 255.810119] dhd_set_suspend: force extra Suspend setting
- [ 255.820831] Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x5
- [ 255.822052] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
- [ 255.822753] early_suspend: calling stop_drawing_early_suspend
- [ 255.823089] early_suspend: calling kgsl_early_suspend_driver
- [ 255.825958] early_suspend: calling msmfb_early_suspend
- [ 255.826141] early_suspend: calling mdp_early_suspend
- [ 255.826232] dtv_pipe is not configured yet
- [ 255.826354] early_suspend: calling msmsdcc_early_suspend
- [ 255.826507] early_suspend: calling msmsdcc_early_suspend
- [ 255.826599] early_suspend: calling msmsdcc_early_suspend
- [ 255.826782] early_suspend: calling msmsdcc_early_suspend
- [ 255.826873] early_suspend: calling msmsdcc_early_suspend
- [ 255.827056] early_suspend: calling sec_bat_early_suspend
- [ 255.827209] sec_bat_early_suspend...
- [ 255.827301] early_suspend: calling mxt224_early_suspend
- [ 255.827514] mxt224_power_off: enter
- [ 255.827850] [TSP POWER OFF L4 1.8 disable
- [ 255.828247] [TSP POWER OFF L1 3.3 disable
- [ 255.828338] mxt224_power_off is finished
- [ 255.828430] [TSP] mxt224_early_suspend
- [ 255.828613] early_suspend: done
- [ 255.828704] active wake lock PowerManagerService.WakeLocks
- [ 255.828796] active wake lock dofstrim
- [ 255.828948] PM: Syncing filesystems...
- [ 256.259429] CPU1: Booted secondary processor
- [ 257.109588] CPU1: Booted secondary processor
- [ 257.729553] CPU1: Booted secondary processor
- [ 267.699493] CPU1: Booted secondary processor
- [ 267.750579] sync done.
- [ 270.249542] CPU1: Booted secondary processor
- [ 271.489837] CPU1: Booted secondary processor
- [ 273.749664] CPU1: Booted secondary processor
- [ 275.959594] CPU1: Booted secondary processor
- [ 277.569519] CPU1: Booted secondary processor
- [ 278.339538] CPU1: Booted secondary processor
- [ 279.319732] CPU1: Booted secondary processor
- [ 280.384796] rmt_storage_event_write_iovec_cb: write iovec callback received
- [ 280.449554] CPU1: Booted secondary processor
- [ 280.629730] rmt_storage_ioctl: send status ioctl
- [ 286.127838] sec_bat_measure_work: adc work already on a queue
- [ 286.132385] [fg] p:6010, s1:63, s2:64, v:3810000, t:935
- [ 286.142761] healthd: battery [l=63 v=3810 t=29.6 h=2 st=3] dock-battery none chg=
- [ 286.329650] CPU1: Booted secondary processor
- [ 287.569641] CPU1: Booted secondary processor
- [ 288.769683] CPU1: Booted secondary processor
- [ 290.499603] CPU1: Booted secondary processor
- [ 293.119750] CPU1: Booted secondary processor
- [ 294.419586] CPU1: Booted secondary processor
- [ 295.569580] CPU1: Booted secondary processor
- [ 296.769470] CPU1: Booted secondary processor
- [ 297.919586] CPU1: Booted secondary processor
- [ 298.719604] CPU1: Booted secondary processor
- [ 299.219726] CPU1: Booted secondary processor
- [ 300.369781] CPU1: Booted secondary processor
- [ 301.669677] CPU1: Booted secondary processor
- [ 303.152099] CPU1: Booted secondary processor
- [ 303.969665] CPU1: Booted secondary processor
- [ 304.969573] CPU1: Booted secondary processor
- [ 306.929565] CPU1: Booted secondary processor
- [ 307.829559] CPU1: Booted secondary processor
- [ 309.929595] CPU1: Booted secondary processor
- [ 311.471343] CPU1: Booted secondary processor
- [ 314.209564] CPU1: Booted secondary processor
- [ 315.569885] CPU1: Booted secondary processor
- [ 316.519531] CPU1: Booted secondary processor
- [ 317.119537] CPU1: Booted secondary processor
- [ 320.499725] CPU1: Booted secondary processor
- [ 322.079589] CPU1: Booted secondary processor
- [ 322.979583] CPU1: Booted secondary processor
- [ 324.891143] CPU1: Booted secondary processor
- [ 325.791839] CPU1: Booted secondary processor
- [ 326.240081] CPU1: Booted secondary processor
- [ 326.282592] healthd: battery [l=63 v=3800 t=29.1 h=2 st=3] dock-battery none chg=
- [ 326.739532] CPU1: Booted secondary processor
- [ 327.591979] CPU1: Booted secondary processor
- [ 328.039672] CPU1: Booted secondary processor
- [ 328.489593] CPU1: Booted secondary processor
- [ 328.939636] CPU1: Booted secondary processor
- [ 329.489562] CPU1: Booted secondary processor
- [ 329.939697] CPU1: Booted secondary processor
- [ 330.339569] CPU1: Booted secondary processor
- [ 330.889526] CPU1: Booted secondary processor
- [ 331.444183] CPU1: Booted secondary processor
- [ 331.943389] CPU1: Booted secondary processor
- [ 332.389678] CPU1: Booted secondary processor
- [ 332.839691] CPU1: Booted secondary processor
- [ 333.344573] CPU1: Booted secondary processor
- [ 333.839660] CPU1: Booted secondary processor
- [ 334.489532] CPU1: Booted secondary processor
- [ 335.239532] CPU1: Booted secondary processor
- [ 335.989562] CPU1: Booted secondary processor
- [ 338.700103] CPU1: Booted secondary processor
- [ 339.099670] CPU1: Booted secondary processor
- [ 339.499572] CPU1: Booted secondary processor
- [ 339.899627] CPU1: Booted secondary processor
- [ 340.549804] CPU1: Booted secondary processor
- [ 341.049682] CPU1: Booted secondary processor
- [ 341.589538] CPU1: Booted secondary processor
- [ 342.579559] CPU1: Booted secondary processor
- [ 343.129608] CPU1: Booted secondary processor
- [ 344.299591] CPU1: Booted secondary processor
- [ 344.699523] CPU1: Booted secondary processor
- [ 345.249603] CPU1: Booted secondary processor
- [ 345.649505] CPU1: Booted secondary processor
- [ 346.299499] CPU1: Booted secondary processor
- [ 346.979522] CPU1: Booted secondary processor
- [ 347.779510] CPU1: Booted secondary processor
- [ 348.179504] CPU1: Booted secondary processor
- [ 348.629608] CPU1: Booted secondary processor
- [ 349.479583] CPU1: Booted secondary processor
- [ 350.029754] CPU1: Booted secondary processor
- [ 350.429504] CPU1: Booted secondary processor
- [ 350.929534] CPU1: Booted secondary processor
- [ 351.479553] CPU1: Booted secondary processor
- [ 352.179626] CPU1: Booted secondary processor
- [ 352.579528] CPU1: Booted secondary processor
- [ 353.279571] CPU1: Booted secondary processor
- [ 354.029632] CPU1: Booted secondary processor
- [ 354.429565] CPU1: Booted secondary processor
- [ 354.929534] CPU1: Booted secondary processor
- [ 355.579528] CPU1: Booted secondary processor
- [ 356.029663] CPU1: Booted secondary processor
- [ 356.779602] CPU1: Booted secondary processor
- [ 357.179534] CPU1: Booted secondary processor
- [ 357.729583] CPU1: Booted secondary processor
- [ 358.129516] CPU1: Booted secondary processor
- [ 358.629547] CPU1: Booted secondary processor
- [ 359.129516] CPU1: Booted secondary processor
- [ 359.929534] CPU1: Booted secondary processor
- [ 360.329559] CPU1: Booted secondary processor
- [ 366.431518] healthd: battery [l=63 v=3828 t=28.9 h=2 st=3] dock-battery none chg=
- [ 390.429656] CPU1: Booted secondary processor
- [ 391.259704] CPU1: Booted secondary processor
- [ 393.209747] CPU1: Booted secondary processor
- [ 406.440673] sec_bat_measure_work: adc work already on a queue
- [ 406.459960] healthd: battery [l=63 v=3847 t=28.9 h=2 st=3] dock-battery none chg=
- [ 439.779510] CPU1: Booted secondary processor
- [ 446.596343] healthd: battery [l=63 v=3847 t=28.8 h=2 st=3] dock-battery none chg=
- [ 452.220550] CPU1: Booted secondary processor
- [ 453.819549] CPU1: Booted secondary processor
- [ 454.590332] init: untracked pid 1268 killed by signal 9
- [ 468.919769] CPU1: Booted secondary processor
- [ 474.109222] init: untracked pid 3602 exited with status 45
- [ 475.152770] init: untracked pid 3613 exited with status 48
- [ 475.425476] CPU1: Booted secondary processor
- [ 477.869750] CPU1: Booted secondary processor
- [ 479.969635] CPU1: Booted secondary processor
- [ 486.619567] CPU1: Booted secondary processor
- [ 486.671783] healthd: battery [l=63 v=3785 t=28.6 h=2 st=3] dock-battery none chg=
- [ 490.719635] CPU1: Booted secondary processor
- [ 493.040557] init: untracked pid 4037 exited with status 213
- [ 494.060089] init: untracked pid 4049 exited with status 47
- [ 503.037506] init: untracked pid 3604 exited with status 0
- [ 503.037689] init: untracked pid 3616 exited with status 0
- [ 508.429626] CPU1: Booted secondary processor
- [ 509.479644] CPU1: Booted secondary processor
- [ 510.574218] init: untracked pid 4052 exited with status 0
- [ 510.582824] init: untracked pid 4040 exited with status 0
- [ 513.949707] CPU1: Booted secondary processor
- [ 522.161437] suspend: enter suspend
- [ 522.162078] Freezing user space processes ...
- [ 522.179595] PM: Syncing filesystems...
- [ 522.238464] (elapsed 0.07 seconds) done.
- [ 522.386322] sync done.
- [ 522.490325] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 522.546691] [VIBTONZ] isa1200_early_suspend
- [ 522.550140] bluesleep suspending...
- [ 522.550201] [BT]
- [ 522.554748] sensor_power_off_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.557342] sensor_power_off_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.558074] sensor_power_off_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.564361] gp2a_opt_suspend(766):
- [ 522.565612] sensor_power_off_vdd: vdd_2p85=0, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.579956] msmsdcc_runtime_suspend: Enter WIFI suspend
- [ 522.580688] bcmsdh_sdmmc_suspend Enter
- [ 522.592742] PM: suspend of devices complete after 58.471 msecs
- [ 522.603973] power_suspend_late return 0
- [ 522.604919] PM: late suspend of devices complete after 11.596 msecs
- [ 522.605468] Disabling non-boot CPUs ...
- [ 522.606567] msm_pm_enter
- [ 522.606567] msm_pm_enter: power collapse
- [ 522.606567] Enabled clocks:
- [ 522.606567] afab_a_clk
- [ 522.606567] ebi1_a_clk
- [ 522.606567] mmfpb_a_clk
- [ 522.606567] Enabled clock count: 3
- [ 522.606567] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
- [ 522.606567] msm_pm_enter: return
- [ 522.615570] PM: early resume of devices complete after 7.965 msecs
- [ 522.619506] wakeup wake lock: alarm_rtc
- [ 522.625946] bcmsdh_sdmmc_resume Enter
- [ 522.626464] bcmsdh_sdmmc_resume Enter
- [ 522.630249] gp2a_opt_resume(786):
- [ 522.631866] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.641754] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
- [ 522.648010] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.649444] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.651763] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- [ 522.656005] bluesleep resuming...
- [ 522.656066] [BT]
- [ 522.664581] [VIBTONZ] isa1200_late_resume
- [ 522.673614] PM: resume of devices complete after 52.946 msecs
- [ 522.686706] Restarting tasks ...
- [ 522.730438] charm_modem_ioctl: Entering ioctl cmd = 7
- [ 522.731811] charm_modem_ioctl: wait for charm to need images reloaded
- [ 522.783081] done.
- [ 522.785278] mmc_pm_notify(): WLAN SKIP DETECT CHANGE
- [ 522.786010] suspend: exit suspend, ret = 0 (2015-09-30 12:44:52.118962608 UTC)
- [ 522.787109] active wake lock mmc2_detect
- [ 522.787597] active wake lock alarm_rtc, time left 84
- [ 522.791076] healthd: battery [l=63 v=3851 t=28.5 h=2 st=3] dock-battery none chg=
- [ 523.151519] suspend: enter suspend
- [ 523.151641] Freezing user space processes ...
- [ 523.154846] PM: Syncing filesystems...
- [ 523.177734] (elapsed 0.02 seconds) done.
- [ 523.197692] sync done.
- [ 523.430236] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 523.454528] [VIBTONZ] isa1200_early_suspend
- [ 523.455169] bluesleep suspending...
- [ 523.455169] [BT]
- [ 523.456146] sensor_power_off_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.457092] sensor_power_off_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.457214] sensor_power_off_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.458343] gp2a_opt_suspend(766):
- [ 523.458892] sensor_power_off_vdd: vdd_2p85=0, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.459930] msmsdcc_runtime_suspend: Enter WIFI suspend
- [ 523.460113] bcmsdh_sdmmc_suspend Enter
- [ 523.520263] PM: suspend of devices complete after 68.113 msecs
- [ 523.522491] power_suspend_late return 0
- [ 523.522644] PM: late suspend of devices complete after 2.257 msecs
- [ 523.522766] Disabling non-boot CPUs ...
- [ 523.523132] msm_pm_enter
- [ 523.523132] msm_pm_enter: power collapse
- [ 523.523132] Enabled clocks:
- [ 523.523132] afab_a_clk
- [ 523.523132] ebi1_a_clk
- [ 523.523132] mmfpb_a_clk
- [ 523.523132] Enabled clock count: 3
- [ 523.523132] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
- [ 523.523132] msm_pm_enter: return
- [ 523.524871] PM: early resume of devices complete after 1.555 msecs
- [ 523.525878] wakeup wake lock: alarm_rtc
- [ 523.528656] bcmsdh_sdmmc_resume Enter
- [ 523.528778] bcmsdh_sdmmc_resume Enter
- [ 523.529449] gp2a_opt_resume(786):
- [ 523.529998] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.533813] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
- [ 523.535491] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.535888] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.536773] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- [ 523.538116] bluesleep resuming...
- [ 523.538146] [BT]
- [ 523.540893] [VIBTONZ] isa1200_late_resume
- [ 523.542541] PM: resume of devices complete after 16.531 msecs
- [ 523.544738] Restarting tasks ...
- [ 523.546813] [fg] p:5916, s1:62, s2:63, v:3856250, t:963
- [ 523.553405] healthd: battery [l=62 v=3856 t=28.5 h=2 st=3] dock-battery none chg=
- [ 523.554168] charm_modem_ioctl: Entering ioctl cmd = 7
- [ 523.554260] charm_modem_ioctl: wait for charm to need images reloaded
- [ 523.580413] done.
- [ 523.580596] mmc_pm_notify(): WLAN SKIP DETECT CHANGE
- [ 523.580718] suspend: exit suspend, ret = 0 (2015-09-30 12:46:14.039398291 UTC)
- [ 523.580902] active wake lock mmc2_detect
- [ 523.581024] active wake lock pmic8058_xoadc_wakelock
- [ 523.581176] active wake lock PowerManagerService.WakeLocks
- [ 523.581268] active wake lock sec-battery-adc
- [ 523.690795] CPU1: Booted secondary processor
- [ 524.014678] suspend: enter suspend
- [ 524.014831] Freezing user space processes ...
- [ 524.015014] PM: Syncing filesystems...
- [ 524.038116] (elapsed 0.02 seconds) done.
- [ 524.122344] sync done.
- [ 524.288269] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 524.315734] [VIBTONZ] isa1200_early_suspend
- [ 524.316467] bluesleep suspending...
- [ 524.316497] [BT]
- [ 524.317565] sensor_power_off_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.318969] sensor_power_off_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.319122] sensor_power_off_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.320404] gp2a_opt_suspend(766):
- [ 524.320953] sensor_power_off_vdd: vdd_2p85=0, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.322174] msmsdcc_runtime_suspend: Enter WIFI suspend
- [ 524.322357] bcmsdh_sdmmc_suspend Enter
- [ 524.382598] PM: suspend of devices complete after 69.427 msecs
- [ 524.385070] power_suspend_late return 0
- [ 524.385253] PM: late suspend of devices complete after 2.531 msecs
- [ 524.385375] Disabling non-boot CPUs ...
- [ 524.389190] msm_pm_enter
- [ 524.389190] msm_pm_enter: power collapse
- [ 524.389190] Enabled clocks:
- [ 524.389190] afab_a_clk
- [ 524.389190] ebi1_a_clk
- [ 524.389190] mmfpb_a_clk
- [ 524.389190] Enabled clock count: 3
- [ 524.389190] msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000
- [ 524.389190] msm_pm_enter: return
- [ 524.389404] Enabling non-boot CPUs ...
- [ 524.391113] CPU1: Booted secondary processor
- [ 524.392852] CPU1 is up
- [ 524.396881] PM: early resume of devices complete after 3.782 msecs
- [ 524.398773] wakeup wake lock: event4-570
- [ 524.402008] bcmsdh_sdmmc_resume Enter
- [ 524.402099] bcmsdh_sdmmc_resume Enter
- [ 524.402832] gp2a_opt_resume(786):
- [ 524.403442] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.406066] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
- [ 524.407958] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.408416] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.409393] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- [ 524.410766] bluesleep resuming...
- [ 524.410766] [BT]
- [ 524.413665] [VIBTONZ] isa1200_late_resume
- [ 524.415618] PM: resume of devices complete after 16.836 msecs
- [ 524.418212] Restarting tasks ...
- [ 524.428894] charm_modem_ioctl: Entering ioctl cmd = 7
- [ 524.429168] charm_modem_ioctl: wait for charm to need images reloaded
- [ 524.442779] healthd: battery [l=62 v=3857 t=28.1 h=2 st=3] dock-battery none chg=
- [ 524.450286] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/affected_cpus: No such file or directory
- [ 524.450683] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/cpu_utilization: No such file or directory
- [ 524.450988] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/related_cpus: No such file or directory
- [ 524.451324] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor: No such file or directory
- [ 524.451629] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver: No such file or directory
- [ 524.451934] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_governors: No such file or directory
- [ 524.452270] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/scaling_setspeed: No such file or directory
- [ 524.452575] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies: No such file or directory
- [ 524.452911] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq: No such file or directory
- [ 524.453216] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq: No such file or directory
- [ 524.453674] SELinux: Could not set context for /sys/devices/system/cpu/cpu1/cpufreq/stats: No such file or directory
- [ 524.453887] SELinux: Could not read /sys/devices/system/cpu/cpu1/cpufreq/stats: No such file or directory.
- [ 524.457763] done.
- [ 524.458068] mmc_pm_notify(): WLAN SKIP DETECT CHANGE
- [ 524.458221] suspend: exit suspend, ret = 0 (2015-09-30 12:47:24.044003511 UTC)
- [ 524.458435] active wake lock mmc2_detect
- [ 524.458526] active wake lock KeyEvents
- [ 524.636474] [TKEY] touchkey is not enabled.W
- [ 524.848052] light_delay_store, new_delay = 1000, old_delay = 1000
- [ 524.848358] light_delay_store, new_delay = 1000, old_delay = 1000
- [ 524.864746] request_suspend_state: wakeup (3->0) at 524836610631 (2015-09-30 12:47:24.450328673 UTC)
- [ 524.865020] late_resume: begin
- [ 524.865112] late_resume: call handlers
- [ 524.865203] late_resume: calling mxt224_late_resume
- [ 524.865386] mxt224_power_on: enter
- [ 524.865722] [TSP POWER ON L1 3.3 enable
- [ 524.865997] [TSP POWER ON L4 1.8 enable
- [ 524.866180] mxt224_power_on: exit
- [ 524.918243] mxt224_power_on is finished
- [ 524.918457] [TSP] ta_status in (mxt224_late_resume) is 0
- [ 524.918670] [TSP] mxt224_ta_probe
- [ 524.929626] [TSP]TA_probe MXT224E T48 Byte2 is 114
- [ 524.930206] [TSP]calibration success!!!
- [ 524.930633] [TSP] mxt224_late_resume
- [ 524.930755] late_resume: calling sec_bat_late_resume
- [ 524.930877] sec_bat_late_resume...
- [ 524.931121] late_resume: calling msmsdcc_late_resume
- [ 524.931304] late_resume: calling msmsdcc_late_resume
- [ 524.931518] late_resume: calling msmsdcc_late_resume
- [ 524.931640] late_resume: calling msmsdcc_late_resume
- [ 524.931762] late_resume: calling msmsdcc_late_resume
- [ 524.932006] [TSP] Calibration End!!!!!!
- [ 524.932128] [TSP] Clearing unused slots
- [ 524.932800] late_resume: calling mdp_early_resume
- [ 524.932952] late_resume: calling msmfb_early_resume
- [ 524.933074] late_resume: calling kgsl_late_resume_driver
- [ 524.935943] [TSP] Calibration End!!!!!!
- [ 524.936065] [TSP] Clearing unused slots
- [ 524.966461] [TSP] Calibration!!!!!!
- [ 524.969451] late_resume: calling start_drawing_late_resume
- [ 524.975494] late_resume: calling dhd_late_resume
- [ 524.975769] dhd_late_resume: enter
- [ 524.975891] dhd_set_suspend: Remove extra suspend setting
- [ 524.979461] [kmj] lcdc_LD9040_panel_power:enable:1
- [ 524.979949] ld9040 lcdc_ld9040_panel_on + (0,0,0)
- [ 524.979980] ld9040 : lcdc_config_gpios [1]
- [ 524.980010] ld9040 start spi_init
- [ 524.980041] ld9040 clk : 103, cs : 104, sdi : 106
- [ 524.980041] ld9040 start ld9040_disp_powerup
- [ 524.994140] [TSP] Calibration End!!!!!!
- [ 524.994171] [TSP] Clearing unused slots
- [ 525.000305] late_resume: calling ebln_late_resume
- [ 525.000335] late_resume: calling ld9040_late_resume
- [ 525.000396] ld9040 panel on at late_resume (0,0,0)
- [ 525.038909] ld9040 start ld9040_disp_on - HW Rev: 13
- [ 525.041595] ld9040 LCD_M3 : 1
- [ 525.044799] ld9040 ACL_cutoff_set Percentage : 40!!
- [ 525.046325] ld9040 ea8868_gamma_ctl 10 10
- [ 525.046447] ld9040 lcdc_ld9040_panel_on - (1,1,1)
- [ 525.050384] late_resume: calling sec_touchkey_early_resume
- [ 525.050415] [TKEY] sec_touchkey_early_resume
- [ 525.050445] [TKEY] tkey_vdd_enable: enter
- [ 525.050506] gpio_request: gpio-157 (TKEY_SCL) status -16
- [ 525.050537] gpio_request: gpio-156 (TKEY_SDA) status -16
- [ 525.050933] [TKEY] LED RESERVED !! LED returned on touchkey_led_status = 16
- [ 525.050964] tkey_led_vdd_enable 1
- [ 525.050994] late_resume: calling ledtrig_sleep_early_resume
- [ 525.051025] late_resume: done
- [ 525.055328] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 525.055358] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 525.087615] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
- [ 525.087738] hdmi_msm hdmi_msm.1: hdmi_common_wta_hpd: '1'''.
- [ 1319.507141]
- [ 1319.507324] Restarting Linux version 3.0.101-cyanogenmod-gdfb2166 (nospamdan@Mint17Build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Sep 29 18:17:20 EDT 2015
- [ 1319.507385]
- [ 1319.508026] set_dload_mode <0> ( C0174264 )
- [ 1319.508361] Going down for restart now
- [ 1319.508972] pm8xxx_reset_pwr_off, [1]
- [ 1319.509307] pm8xxx_reset_pwr_off, [2]
- [ 1319.509643] pm8xxx_reset_pwr_off, [3]
- [ 1319.510314] pm8xxx_reset_pwr_off, [4]
- [ 1319.510650] pm8xxx_reset_pwr_off, [5]
- [ 1319.518981] pm8xxx_reset_pwr_off, [6]
- [ 1319.519592] pm8xxx_reset_pwr_off, [7]
- [ 1319.519927] pm8xxx_reset_pwr_off, [8]
- No errors detected
Add Comment
Please, Sign In to add comment