API tools faq
paste
Advertisement
Guest User

metaron's pi2 dmesg

a guest
May 31st, 2017
514
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.87 KB | None | 0 0
raw download clone embed print report
  1. pi2 boot-jesse # dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0xf00
  3. [ 0.000000] Linux version 4.8.16-v7+ (root@pi2) (gcc version 4.9.4 (Gentoo 4.9.4 p1.0, pie-0.6.4) ) #1 SMP Tue May 30 01:17:22 BST 2017
  4. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: div instructions available: patching division code
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] OF: fdt:Machine model: Raspberry Pi 2 Model B Rev 1.1
  8. [ 0.000000] early_vc_cma_mem(0/0x11800000@0x2b400000)
  9. [ 0.000000] -> initial 0, size 11800000, base 2b400000
  10. [ 0.000000] cma: Reserved 280 MiB at 0x2b400000
  11. [ 0.000000] vc_cma_reserve - using vc_cma as the default contiguous DMA area
  12. [ 0.000000] Memory policy: Data cache writealloc
  13. [ 0.000000] On node 0 totalpages: 248832
  14. [ 0.000000] free_area_init_node: node 0, pgdat 80c6c780, node_mem_map aaadf000
  15. [ 0.000000] Normal zone: 2187 pages used for memmap
  16. [ 0.000000] Normal zone: 0 pages reserved
  17. [ 0.000000] Normal zone: 248832 pages, LIFO batch:31
  18. [ 0.000000] percpu: Embedded 14 pages/cpu @aaa98000 s24780 r8192 d24372 u57344
  19. [ 0.000000] pcpu-alloc: s24780 r8192 d24372 u57344 alloc=14*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 246645
  22. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2709.boardrev=0xa01041 bcm2709.serial=0xfa5cbf4a smsc95xx.macaddr=B8:27:EB:5C:BF:4A bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc-cma-mem=0/0x11800000@0x2b400000 mem=0x2b400000@0x0 mem=0x11800000@0x2b400000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [ 0.000000] Memory: 685664K/995328K available (7168K kernel code, 474K rwdata, 2004K rodata, 1024K init, 774K bss, 22944K reserved, 286720K cma-reserved)
  27. [ 0.000000] Virtual kernel memory layout:
  28. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  30. vmalloc : 0xbd000000 - 0xff800000 (1064 MB)
  31. lowmem : 0x80000000 - 0xbcc00000 ( 972 MB)
  32. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  33. .text : 0x80008000 - 0x80800000 (8160 kB)
  34. .init : 0x80b00000 - 0x80c00000 (1024 kB)
  35. .data : 0x80c00000 - 0x80c76834 ( 475 kB)
  36. .bss : 0x80c78000 - 0x80d39964 ( 775 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Hierarchical RCU implementation.
  39. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  40. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  42. [ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
  43. [ 0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  44. [ 0.000000] arm_arch_timer: WARNING: Please fix your firmware
  45. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
  46. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  47. [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  48. [ 0.000032] Switching to timer-based delay loop, resolution 52ns
  49. [ 0.000392] Console: colour dummy device 80x30
  50. [ 0.001717] console [tty1] enabled
  51. [ 0.001775] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  52. [ 0.001852] pid_max: default: 32768 minimum: 301
  53. [ 0.002296] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.002350] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  55. [ 0.003675] Disabling cpuset control group subsystem
  56. [ 0.003940] CPU: Testing write buffer coherency: ok
  57. [ 0.004035] ftrace: allocating 21979 entries in 65 pages
  58. [ 0.058050] CPU0: update cpu_capacity 1024
  59. [ 0.058131] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  60. [ 0.058229] Setting up static identity map for 0x100000 - 0x100034
  61. [ 0.061334] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  62. [ 0.061341] arm_arch_timer: WARNING: Please fix your firmware
  63. [ 0.061354] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  64. [ 0.061358] arm_arch_timer: WARNING: Please fix your firmware
  65. [ 0.061378] CPU1: update cpu_capacity 1024
  66. [ 0.061386] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  67. [ 0.062381] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  68. [ 0.062386] arm_arch_timer: WARNING: Please fix your firmware
  69. [ 0.062394] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  70. [ 0.062397] arm_arch_timer: WARNING: Please fix your firmware
  71. [ 0.062410] CPU2: update cpu_capacity 1024
  72. [ 0.062418] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  73. [ 0.063331] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  74. [ 0.063336] arm_arch_timer: WARNING: Please fix your firmware
  75. [ 0.063343] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  76. [ 0.063347] arm_arch_timer: WARNING: Please fix your firmware
  77. [ 0.063360] CPU3: update cpu_capacity 1024
  78. [ 0.063367] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  79. [ 0.063477] Brought up 4 CPUs
  80. [ 0.064088] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  81. [ 0.064121] CPU: All CPU(s) started in HYP mode.
  82. [ 0.064150] CPU: Virtualization extensions available.
  83. [ 0.065281] devtmpfs: initialized
  84. [ 0.078795] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  85. [ 0.079227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  86. [ 0.094281] pinctrl core: initialized pinctrl subsystem
  87. [ 0.095145] NET: Registered protocol family 16
  88. [ 0.098307] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  89. [ 0.100028] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  90. [ 0.100087] hw-breakpoint: maximum watchpoint size is 8 bytes.
  91. [ 0.100290] Serial: AMBA PL011 UART driver
  92. [ 0.104295] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  93. [ 0.105108] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  94. [ 0.179350] bcm2835-dma 3f007000.dma: DMA legacy API manager at bd012000, dmachans=0x1
  95. [ 0.181899] SCSI subsystem initialized
  96. [ 0.182155] usbcore: registered new interface driver usbfs
  97. [ 0.182294] usbcore: registered new interface driver hub
  98. [ 0.182478] usbcore: registered new device driver usb
  99. [ 0.187788] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-05-31 11:45
  100. [ 0.190062] clocksource: Switched to clocksource arch_sys_counter
  101. [ 0.244321] VFS: Disk quotas dquot_6.6.0
  102. [ 0.244474] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  103. [ 0.244803] FS-Cache: Loaded
  104. [ 0.245209] CacheFiles: Loaded
  105. [ 0.261842] NET: Registered protocol family 2
  106. [ 0.263133] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  107. [ 0.263302] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  108. [ 0.263521] TCP: Hash tables configured (established 8192 bind 8192)
  109. [ 0.263674] UDP hash table entries: 512 (order: 2, 16384 bytes)
  110. [ 0.263762] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  111. [ 0.264105] NET: Registered protocol family 1
  112. [ 0.264786] RPC: Registered named UNIX socket transport module.
  113. [ 0.264832] RPC: Registered udp transport module.
  114. [ 0.264864] RPC: Registered tcp transport module.
  115. [ 0.264896] RPC: Registered tcp NFSv4.1 backchannel transport module.
  116. [ 0.266395] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  117. [ 0.268081] futex hash table entries: 1024 (order: 4, 65536 bytes)
  118. [ 0.269679] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  119. [ 0.288384] FS-Cache: Netfs 'nfs' registered for caching
  120. [ 0.289692] NFS: Registering the id_resolver key type
  121. [ 0.289767] Key type id_resolver registered
  122. [ 0.289799] Key type id_legacy registered
  123. [ 0.293037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  124. [ 0.293273] io scheduler noop registered (default)
  125. [ 0.293315] io scheduler deadline registered
  126. [ 0.293694] io scheduler cfq registered
  127. [ 0.296132] BCM2708FB: allocated DMA memory eb500000
  128. [ 0.296209] BCM2708FB: allocated DMA channel 0 @ bd012000
  129. [ 0.335970] Console: switching to colour frame buffer device 160x64
  130. [ 1.279842] bcm2835-rng 3f104000.rng: hwrng registered
  131. [ 1.280292] vc-cma: Videocore CMA driver
  132. [ 1.280451] vc-cma: vc_cma_base = 0x2b400000
  133. [ 1.280610] vc-cma: vc_cma_size = 0x11800000 (280 MiB)
  134. [ 1.280789] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  135. [ 1.281345] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  136. [ 1.302845] brd: module loaded
  137. [ 1.314647] loop: module loaded
  138. [ 1.315939] vchiq: vchiq_init_state: slot_zero = 0xab580000, is_master = 0
  139. [ 1.326861] Loading iSCSI transport class v2.0-870.
  140. [ 1.327914] usbcore: registered new interface driver smsc95xx
  141. [ 1.328126] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  142. [ 1.554459] Core Release: 2.80a
  143. [ 1.554591] Setting default values for core params
  144. [ 1.554781] Finished setting default values for core params
  145. [ 1.755411] Using Buffer DMA mode
  146. [ 1.755537] Periodic Transfer Interrupt Enhancement - disabled
  147. [ 1.755724] Multiprocessor Interrupt Enhancement - disabled
  148. [ 1.755903] OTG VER PARAM: 0, OTG VER FLAG: 0
  149. [ 1.756056] Dedicated Tx FIFOs mode
  150. [ 1.756643] WARN::dwc_otg_hcd_init:1049: FIQ DMA bounce buffers: virt = 0xab514000 dma = 0xeb514000 len=9024
  151. [ 1.756977] FIQ FSM acceleration enabled for :
  152. Non-periodic Split Transactions
  153. Periodic Split Transactions
  154. High-Speed Isochronous Endpoints
  155. Interrupt/Control Split Transaction hack enabled
  156. [ 1.757635] dwc_otg: Microframe scheduler enabled
  157. [ 1.757708] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8057f99c
  158. [ 1.757911] WARN::hcd_init_fiq:414: FIQ ASM at 0x8057fd0c length 36
  159. [ 1.758117] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbd5ae000
  160. [ 1.765857] dwc_otg 3f980000.usb: DWC OTG Controller
  161. [ 1.773529] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  162. [ 1.781315] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  163. [ 1.789048] Init: Port Power? op_state=1
  164. [ 1.796671] Init: Power Port (0)
  165. [ 1.804510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  166. [ 1.812178] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  167. [ 1.819797] usb usb1: Product: DWC OTG Controller
  168. [ 1.827365] usb usb1: Manufacturer: Linux 4.8.16-v7+ dwc_otg_hcd
  169. [ 1.834950] usb usb1: SerialNumber: 3f980000.usb
  170. [ 1.843647] hub 1-0:1.0: USB hub found
  171. [ 1.851296] hub 1-0:1.0: 1 port detected
  172. [ 1.859606] dwc_otg: FIQ enabled
  173. [ 1.859612] dwc_otg: NAK holdoff enabled
  174. [ 1.859617] dwc_otg: FIQ split-transaction FSM enabled
  175. [ 1.859632] Module dwc_common_port init
  176. [ 1.860009] usbcore: registered new interface driver usb-storage
  177. [ 1.868061] mousedev: PS/2 mouse device common for all mice
  178. [ 1.876974] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  179. [ 1.885039] bcm2835-cpufreq: min=600000 max=900000
  180. [ 1.893114] sdhci: Secure Digital Host Controller Interface driver
  181. [ 1.900734] sdhci: Copyright(c) Pierre Ossman
  182. [ 1.908792] sdhost: log_buf @ ab513000 (eb513000)
  183. [ 1.990109] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  184. [ 2.018024] sdhci-pltfm: SDHCI platform and OF driver helper
  185. [ 2.026528] ledtrig-cpu: registered to indicate activity on CPUs
  186. [ 2.034347] hidraw: raw HID events driver (C) Jiri Kosina
  187. [ 2.046197] usbcore: registered new interface driver usbhid
  188. [ 2.053784] usbhid: USB HID core driver
  189. [ 2.063946] Initializing XFRM netlink socket
  190. [ 2.071706] NET: Registered protocol family 17
  191. [ 2.073322] Indeed it is in host mode hprt0 = 00021501
  192. [ 2.087120] Key type dns_resolver registered
  193. [ 2.095540] Registering SWP/SWPB emulation handler
  194. [ 2.120926] registered taskstats version 1
  195. [ 2.128578] vc-sm: Videocore shared memory driver
  196. [ 2.136222] [vc_sm_connected_init]: start
  197. [ 2.144557] [vc_sm_connected_init]: end - returning 0
  198. [ 2.152723] of_cfs_init
  199. [ 2.160512] of_cfs_init: OK
  200. [ 2.162741] random: fast init done
  201. [ 2.177716] mmc0: host does not support reading read-only switch, assuming write-enable
  202. [ 2.185895] Waiting for root device /dev/mmcblk0p2...
  203. [ 2.187449] mmc0: new high speed SDHC card at address 1234
  204. [ 2.188550] mmcblk0: mmc0:1234 SA08G 7.21 GiB
  205. [ 2.202614] mmcblk0: p1 p2
  206. [ 2.230543] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
  207. [ 2.238291] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  208. [ 2.256039] devtmpfs: mounted
  209. [ 2.265656] Freeing unused kernel memory: 1024K (80b00000 - 80c00000)
  210. [ 2.270129] usb 1-1: new high-speed USB device number 2 using dwc_otg
  211. [ 2.270349] Indeed it is in host mode hprt0 = 00001101
  212. [ 2.500554] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  213. [ 2.508407] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  214. [ 2.517179] hub 1-1:1.0: USB hub found
  215. [ 2.525068] hub 1-1:1.0: 5 ports detected
  216. [ 2.850164] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  217. [ 3.000508] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  218. [ 3.008284] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  219. [ 3.033246] smsc95xx v1.0.4
  220. [ 3.134666] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5c:bf:4a
  221. [ 3.240179] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  222. [ 3.371097] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
  223. [ 3.379454] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  224. [ 3.379464] usb 1-1.2: Product: USB 2.0 Hub [MTT]
  225. [ 3.380708] hub 1-1.2:1.0: USB hub found
  226. [ 3.380834] hub 1-1.2:1.0: 4 ports detected
  227. [ 3.680167] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
  228. [ 3.901829] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5581
  229. [ 3.909960] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  230. [ 3.918042] usb 1-1.3: Product: Sandisk Ultra
  231. [ 3.926065] usb 1-1.3: Manufacturer: SanDisk
  232. [ 3.934200] usb 1-1.3: SerialNumber: A200131412478A17
  233. [ 3.943902] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  234. [ 3.953035] scsi host0: usb-storage 1-1.3:1.0
  235. [ 4.010211] usb 1-1.2.1: new high-speed USB device number 6 using dwc_otg
  236. [ 4.141276] usb 1-1.2.1: New USB device found, idVendor=0572, idProduct=c688
  237. [ 4.149426] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  238. [ 4.158052] usb 1-1.2.1: Product: USB Stick
  239. [ 4.166619] usb 1-1.2.1: Manufacturer: Max
  240. [ 4.174649] usb 1-1.2.1: SerialNumber: 080116
  241. [ 4.280194] usb 1-1.5: new high-speed USB device number 7 using dwc_otg
  242. [ 4.491352] usb 1-1.5: New USB device found, idVendor=0bc2, idProduct=61b5
  243. [ 4.499887] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  244. [ 4.508671] usb 1-1.5: Product: M3
  245. [ 4.516801] usb 1-1.5: Manufacturer: Seagate
  246. [ 4.525314] usb 1-1.5: SerialNumber: NM12D2SR
  247. [ 4.535002] usb-storage 1-1.5:1.0: USB Mass Storage device detected
  248. [ 4.544074] scsi host1: usb-storage 1-1.5:1.0
  249. [ 4.600177] usb 1-1.2.2: new high-speed USB device number 8 using dwc_otg
  250. [ 4.762153] usb 1-1.2.2: New USB device found, idVendor=0bc2, idProduct=3322
  251. [ 4.770455] usb 1-1.2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  252. [ 4.778743] usb 1-1.2.2: Product: Expansion Desk
  253. [ 4.787413] usb 1-1.2.2: Manufacturer: Seagate
  254. [ 4.795497] usb 1-1.2.2: SerialNumber: NA8EDCMC
  255. [ 4.805428] usb-storage 1-1.2.2:1.0: USB Mass Storage device detected
  256. [ 4.814374] scsi host2: usb-storage 1-1.2.2:1.0
  257. [ 4.920173] usb 1-1.2.3: new low-speed USB device number 9 using dwc_otg
  258. [ 4.971410] scsi 0:0:0:0: Direct-Access SanDisk Sandisk Ultra PMAP PQ: 0 ANSI: 6
  259. [ 4.981946] sd 0:0:0:0: [sda] 61800448 512-byte logical blocks: (31.6 GB/29.5 GiB)
  260. [ 4.992030] sd 0:0:0:0: [sda] Write Protect is off
  261. [ 5.000108] sd 0:0:0:0: [sda] Mode Sense: 2b 00 00 08
  262. [ 5.001275] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  263. [ 5.056473] usb 1-1.2.3: New USB device found, idVendor=0461, idProduct=4de3
  264. [ 5.065376] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  265. [ 5.074010] usb 1-1.2.3: Product: USB OPTICAL MOUSE
  266. [ 5.082218] usb 1-1.2.3: Manufacturer: Primax
  267. [ 5.100768] input: Primax USB OPTICAL MOUSE as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:0461:4DE3.0001/input/input0
  268. [ 5.110456] hid-generic 0003:0461:4DE3.0001: input,hidraw0: USB HID v1.11 Mouse [Primax USB OPTICAL MOUSE] on usb-3f980000.usb-1.2.3/input0
  269. [ 5.220191] usb 1-1.2.4: new low-speed USB device number 10 using dwc_otg
  270. [ 5.376516] usb 1-1.2.4: New USB device found, idVendor=1267, idProduct=0103
  271. [ 5.385408] usb 1-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  272. [ 5.409680] input: HID 1267:0103 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:1267:0103.0002/input/input1
  273. [ 5.481497] hid-generic 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-3f980000.usb-1.2.4/input0
  274. [ 5.506846] input: HID 1267:0103 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:1267:0103.0003/input/input2
  275. [ 5.580580] hid-generic 0003:1267:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-3f980000.usb-1.2.4/input1
  276. [ 5.611427] scsi 1:0:0:0: Direct-Access Seagate M3 0707 PQ: 0 ANSI: 6
  277. [ 5.851695] scsi 2:0:0:0: Direct-Access Seagate Expansion Desk 9401 PQ: 0 ANSI: 6
  278. [ 5.863066] sd 2:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
  279. [ 5.873541] sd 2:0:0:0: [sdc] Write Protect is off
  280. [ 5.883532] sd 2:0:0:0: [sdc] Mode Sense: 4f 00 00 00
  281. [ 5.884364] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  282. [ 5.928519] sdc: sdc1 sdc2 sdc3
  283. [ 5.942583] sd 2:0:0:0: [sdc] Attached SCSI disk
  284. [ 7.241246] sda: sda1 sda2
  285. [ 7.256146] sd 0:0:0:0: [sda] Attached SCSI removable disk
  286. [ 7.536460] sd 1:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
  287. [ 7.546805] sd 1:0:0:0: [sdb] Write Protect is off
  288. [ 7.557026] sd 1:0:0:0: [sdb] Mode Sense: 47 00 00 08
  289. [ 7.557662] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  290. [ 7.602034] sdb: sdb1
  291. [ 7.614545] sd 1:0:0:0: [sdb] Attached SCSI disk
  292. [ 11.840275] udevd[562]: starting version 3.1.5
  293. [ 12.633937] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  294. [ 12.786104] random: crng init done
  295. [ 12.857342] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
  296. [ 13.130643] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
  297. [ 13.131637] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
  298. [ 13.161726] i2c i2c-3: Added multiplexed i2c bus 4
  299. [ 13.161745] si2168 3-0064: Silicon Labs Si2168-B40 successfully identified
  300. [ 13.161758] si2168 3-0064: firmware version: B 4.0.2
  301. [ 13.175637] media: Linux media interface: v0.10
  302. [ 13.184821] si2157 4-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
  303. [ 13.184909] usb 1-1.2.1: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
  304. [ 13.186169] input: IR-receiver inside an USB DVB receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/input/input3
  305. [ 13.186557] dvb-usb: schedule remote query interval to 100 msecs.
  306. [ 13.186715] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
  307. [ 13.186916] usbcore: registered new interface driver dvb_usb_cxusb
  308. [ 14.964006] EXT4-fs (mmcblk0p2): Remounting file system with no journal so ignoring journalled data option
  309. [ 14.971377] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=writeback
  310. [ 15.890798] Adding 22510588k swap on /dev/sda2. Priority:-1 extents:1 across:22510588k FS
  311. [ 16.327928] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  312. [ 16.400159] JFS: nTxBlock = 7604, nTxLock = 60838
  313. [ 16.445016] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
  314. [ 16.456925] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
  315. [ 24.482982] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  316. [ 26.031504] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  317. [ 29.030834] NET: Registered protocol family 10
  318. [ 30.492620] FS-Cache: Netfs 'cifs' registered for caching
  319. [ 30.493487] Key type cifs.spnego registered
  320. [ 30.493511] Key type cifs.idmap registered
  321. [ 37.317950] si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
  322. [ 37.940422] si2168 3-0064: firmware version: B 4.0.4
  323. [ 37.968520] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  324. [ 38.502324] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  325. [ 38.503741] NFSD: starting 90-second grace period (net 80c62700)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!