Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ### Target Vendor/Product (support only Ralink RT3883/MT7620/MT7621/MT7628)
- CONFIG_VENDOR=TPLINK
- CONFIG_PRODUCT=MT7620
- ### Target ProductID (board select, max 12 symbols)
- CONFIG_FIRMWARE_PRODUCT_ID="TL_C5-V4"
- ############################################################
- ### Linux kernel configuration
- ############################################################
- ### Force MT7620 CPU clock to 600MHz (override Uboot settings)
- #CONFIG_FIRMWARE_CPU_600MHZ=y
- ### Enable MT7620 CPU sleep mode (downclock to 200MHz on idle)
- #CONFIG_FIRMWARE_CPU_SLEEP=y
- ### Kernel driver select for WiFi AP 2.4GHz
- ### 2.7 = MT7620 v2.7.2.0
- ### 3.0 = MT7620 v3.0.4.0
- CONFIG_FIRMWARE_WIFI2_DRIVER=2.7
- ### Kernel driver select for WiFi AP 5GHz
- ### 3.0 = MT7612E v3.0.4.0
- CONFIG_FIRMWARE_WIFI5_DRIVER=3.0
- ### Enable IPv6 support
- CONFIG_FIRMWARE_ENABLE_IPV6=y
- ### Include XFRM (IPsec) modules CONFIG_FIRMWARE_ENABLE_IPV6=y iptables extension ~ 0.2MB
- #CONFIG_FIRMWARE_INCLUDE_XFRM=y
- ### Enable USB support
- CONFIG_FIRMWARE_ENABLE_USB=y
- ### Enable FAT/FAT32 filesystem support. ~0.1MB
- #CONFIG_FIRMWARE_ENABLE_FAT=y
- ### Enable exFAT (FAT/FAT32 too) filesystem support. ~0.12MB
- CONFIG_FIRMWARE_ENABLE_EXFAT=y
- ### Enable EXT2 filesystem support. ~0.1MB
- #CONFIG_FIRMWARE_ENABLE_EXT2=y
- ### Enable EXT3 filesystem support. ~0.2MB
- #CONFIG_FIRMWARE_ENABLE_EXT3=y
- ### Enable EXT4 (EXT3/2 too) filesystem support. ~0.4MB
- CONFIG_FIRMWARE_ENABLE_EXT4=y
- ### Enable XFS filesystem support. ~0.6MB
- #CONFIG_FIRMWARE_ENABLE_XFS=y
- ### Enable Apple HFS+ filesystem support. ~0.1MB
- #CONFIG_FIRMWARE_ENABLE_HFS=y
- ### Enable FUSE (filesystems in userspace) support. ~0.1MB
- CONFIG_FIRMWARE_ENABLE_FUSE=y
- ### Enable swap files/partitions support. ~0.05MB
- CONFIG_FIRMWARE_ENABLE_SWAP=y
- ### Include UVC camera modules. ~0.2MB
- #CONFIG_FIRMWARE_INCLUDE_UVC=y
- ### Include USB-HID modules. ~0.2MB
- #CONFIG_FIRMWARE_INCLUDE_HID=y
- ### Include USB-Serial modules (e.g. pl2303). ~0.03MB
- #CONFIG_FIRMWARE_INCLUDE_SERIAL=y
- ### Include USB-Audio modules ~0.46MB
- #CONFIG_FIRMWARE_INCLUDE_AUDIO=y
- ### Include network QoS scheduling modules. ~0.2MB
- #CONFIG_FIRMWARE_INCLUDE_QOS=y
- ### Include IMQ module for shapers (a bit of performance degradation). ~0.02MB
- #CONFIG_FIRMWARE_INCLUDE_IMQ=y
- ### Include IFB module for shapers. ~0.03MB
- #CONFIG_FIRMWARE_INCLUDE_IFB=y
- ### Include IPSet utility and kernel modules. ~0.4MB
- CONFIG_FIRMWARE_INCLUDE_IPSET=y
- ### Include NFSv3 server. ~0.6MB
- #CONFIG_FIRMWARE_INCLUDE_NFSD=y
- ### Include NFSv3 client. ~0.5MB
- #CONFIG_FIRMWARE_INCLUDE_NFSC=y
- ### Include CIFS (SMB) client. ~0.2MB
- #CONFIG_FIRMWARE_INCLUDE_CIFS=y
- ### Включить сборку бэкпортированных драйверов для медиа устройств
- #CONFIG_FIRMWARE_ENABLE_BACKPORTED=y
- ### Поместить бэкпортированный драйвера в образ прошивки
- ### (в противном случае они будут собраны в отдельный архив для размещения в /opt/lib/)
- #CONFIG_FIRMWARE_INCLUDE_BACKPORTED=y
- ############################################################
- ### Userspace configuration
- ############################################################
- ### Include WebUI international resources. Increased firmware size
- #CONFIG_FIRMWARE_INCLUDE_LANG_BR=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_CZ=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_DA=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_DE=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_ES=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_FI=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_FR=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_NO=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_PL=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_RU=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_SV=y
- #CONFIG_FIRMWARE_INCLUDE_LANG_UK=y
- ### Include NTFS-3G FUSE driver (instead of Paragon "ufsd"). ~0.4MB
- CONFIG_FIRMWARE_INCLUDE_NTFS_3G=y
- ### Include LPR printer daemon. ~0.12MB
- CONFIG_FIRMWARE_INCLUDE_LPRD=y
- ### Include USB-over-Ethernet printer daemon. ~0.05MB
- #CONFIG_FIRMWARE_INCLUDE_U2EC=y
- ### Include "tcpdump" utility. ~0.6MB
- #CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y
- ### Include "hdparm" utility (allow set HDD spindown timeout and APM). ~0.1MB
- CONFIG_FIRMWARE_INCLUDE_HDPARM=y
- ### Include "parted" utility (allow make GPT partitions). ~0.3MB
- CONFIG_FIRMWARE_INCLUDE_PARTED=y
- ### Include SMB (and WINS) server. ~1.5MB
- #CONFIG_FIRMWARE_INCLUDE_SMBD=y
- ### Add support SMB2
- CONFIG_FIRMWARE_INCLUDE_SMBD36=y
- ### Include WINS server only. ~0.4MB
- #CONFIG_FIRMWARE_INCLUDE_WINS=y
- ### Include syslog for SMB and WINS server. ~0.3MB
- #CONFIG_FIRMWARE_INCLUDE_SMBD_SYSLOG=y
- ### Include FTP server. ~0.2MB
- #CONFIG_FIRMWARE_INCLUDE_FTPD=y
- ### Include alternative L2TP control client RP-L2TP. ~0.1MB
- CONFIG_FIRMWARE_INCLUDE_RPL2TP=y
- ### Include EAP-TTLS and EAP-PEAP authentication support. openssl ~1.2MB, wpa_supplicant +0.04MB
- CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y
- ### Include HTTPS support for DDNS client. openssl ~1.2MB
- CONFIG_FIRMWARE_INCLUDE_DDNS_SSL=y
- ### Include HTTPS support. openssl ~1.2MB
- CONFIG_FIRMWARE_INCLUDE_HTTPS=y
- ### Include sftp-server. openssl ~1.2MB, sftp-server ~0.06MB
- CONFIG_FIRMWARE_INCLUDE_SFTP=y
- ### Include dropbear SSH. ~0.3MB
- CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y
- ### Make the dropbear symmetrical ciphers and hashes faster. ~0.06MB
- CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y
- ### Include OpenSSH instead of dropbear. openssl ~1.2MB, openssh ~1.0MB
- #CONFIG_FIRMWARE_INCLUDE_OPENSSH=y
- ### Include OpenVPN. IPv6 required. openssl ~1.2MB, openvpn ~0.4MB
- CONFIG_FIRMWARE_INCLUDE_OPENVPN=y
- ### Include StrongSwan. XFRM modules ~0.2MB, strongswan ~0.7MB
- #CONFIG_FIRMWARE_INCLUDE_SSWAN=y
- ### Include Wireguard VPN module and utilite
- #CONFIG_FIRMWARE_INCLUDE_WIREGUARD=y
- ### Include Elliptic Curves (EC) to openssl library. ~0.1MB
- CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y
- ### Include "openssl" executable for generate certificates. ~0.4MB
- CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y
- ### Include xUPNPd IPTV mediaserver. ~0.3MB
- #CONFIG_FIRMWARE_INCLUDE_XUPNPD=y
- ### Include Minidlna UPnP mediaserver. ~1.6MB
- #CONFIG_FIRMWARE_INCLUDE_MINIDLNA=y
- ### Include Firefly iTunes mediaserver. ~1.0MB
- #CONFIG_FIRMWARE_INCLUDE_FIREFLY=y
- ### Include ffmpeg 0.11.x instead of 0.6.x for Minidlna and Firefly. ~0.1MB
- #CONFIG_FIRMWARE_INCLUDE_FFMPEG_NEW=y
- ### Include Transmission torrent. openssl ~1.2MB, transmission ~1.5MB
- #CONFIG_FIRMWARE_INCLUDE_TRANSMISSION=y
- ### Include Transmission-Web-Control (advanced WebUI). ~0.8MB
- #CONFIG_FIRMWARE_INCLUDE_TRANSMISSION_WEB_CONTROL=y
- ### Include Aria2 download manager. openssl ~1.2MB, aria2 ~3.5MB
- #CONFIG_FIRMWARE_INCLUDE_ARIA=y
- ### Include Aria2 WEB control. ~0.7MB
- #CONFIG_FIRMWARE_INCLUDE_ARIA_WEB_CONTROL=y
- ### Include TOR proxy ~2.3MB
- #CONFIG_FIRMWARE_INCLUDE_TOR=y
- ### Include GeoIP database info for TOR proxy ~1.1MB
- #CONFIG_FIRMWARE_INCLUDE_TOR_GEOIP=y
- ### Include IPv6 GeoIP database info for TOR proxy ~1.1MB
- #CONFIG_FIRMWARE_INCLUDE_TOR_GEOIPV6=y
- ### Include Privoxy proxy ~0.3MB
- #CONFIG_FIRMWARE_INCLUDE_PRIVOXY=y
- ### Include DNSCrypt proxy ~0.5MB
- #CONFIG_FIRMWARE_INCLUDE_DNSCRYPT=y
- ### Include Stubby ~0.5MB
- #CONFIG_FIRMWARE_INCLUDE_STUBBY=y
- ### Include WPAD support
- #CONFIG_FIRMWARE_INCLUDE_WPAD=y
- ### Include compressed memory support
- #CONFIG_FIRMWARE_INCLUDE_ZRAM=y
- ### Add adb package
- #CONFIG_FIRMWARE_INCLUDE_ADB=y
- ### Include LUA support
- #CONFIG_FIRMWARE_INCLUDE_LUA=y
- ############################################################
- ### Connection settings SSH PROMETHEUS
- ############################################################
- ### IP
- IPWRT=192.168.1.1
- ### Login
- ROOTWRT=admin
- ### Password
- PWDR="admin"
- ### SSH Port
- ssh_port="22"
- ############################################################
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement