Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.9.78-147536-g7304d83-dirty (frepau01@bc5c9cc512a5) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Jan 9 09:58:59 UTC 2019
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
- [ 0.000000] bootconsole [pl11] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0xbd307018
- [ 0.000000] Ion: base 0xbb500000, size is 0x1e00000, node name graphic, heap-name carveout_gralloc namesize 17,[99][97][114][118]
- [ 0.000000] Ion: insert heap-name carveout_gralloc
- [ 0.000000] OF: reserved mem: initialized node graphic, compatible id hisi_ion
- [ 0.000000] cma: Reserved 64 MiB at 0x00000000b6400000
- [ 0.000000] On node 0 totalpages: 1566519
- [ 0.000000] DMA zone: 12189 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 780087 pages, LIFO batch:31
- [ 0.000000] Normal zone: 12288 pages used for memmap
- [ 0.000000] Normal zone: 786432 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] percpu: Embedded 22 pages/cpu @ffff8001bfed7000 s49944 r8192 d31976 u90112
- [ 0.000000] pcpu-alloc: s49944 r8192 d31976 u90112 alloc=22*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1542042
- [ 0.000000] Kernel command line: androidboot.hardware=hikey970 firmware_class.path=/system/etc/firmware loglevel=15 buildvariant=userdebug androidboot.selinux=permissive clk_ignore_unused=true root=/dee
- [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
- [ 0.000000] log_buf_len min size: 16384 bytes
- [ 0.000000] log_buf_len: 65536 bytes
- [ 0.000000] early log buf free: 13924(84%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] software IO TLB [mem 0xb2400000-0xb6400000] (64MB) mapped at [ffff8000b2400000-ffff8000b63fffff]
- [ 0.000000] Memory: 5963864K/6266076K available (12412K kernel code, 1114K rwdata, 5152K rodata, 4096K init, 542K bss, 236676K reserved, 65536K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008ca0000 ( 12416 KB)
- [ 0.000000] .rodata : 0xffff000008ca0000 - 0xffff0000091b0000 ( 5184 KB)
- [ 0.000000] .init : 0xffff0000091b0000 - 0xffff0000095b0000 ( 4096 KB)
- [ 0.000000] .data : 0xffff0000095b0000 - 0xffff0000096c6a00 ( 1115 KB)
- [ 0.000000] .bss : 0xffff0000096c6a00 - 0xffff00000974e53c ( 543 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0007000000 ( 112 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff8001c0000000 ( 7168 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1.92MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
- [ 0.000003] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
- [ 0.008681] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
- [ 0.018879] pid_max: default: 32768 minimum: 301
- [ 0.023575] Security Framework initialized
- [ 0.027713] SELinux: Initializing.
- [ 0.031257] SELinux: Starting in permissive mode
- [ 0.036023] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.042970] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.051546] sched-energy: Sched-energy-costs installed from DT
- [ 0.057448] CPU0: update cpu_capacity 360
- [ 0.061500] ASID allocator initialised with 32768 entries
- [ 0.099034] /soc/interrupt-controller@0xf4000000: Unable to locate ITS domain
- [ 0.106351] /soc/interrupt-controller@0xf4000000: unable to locate ITS domain
- [ 0.114372] Remapping and enabling EFI services.
- [ 0.119055] EFI remap 0x00000000ba400000 => 0000000020000000
- [ 0.124952] EFI remap 0x00000000ba450000 => 0000000020030000
- [ 0.130858] EFI remap 0x00000000ba4a0000 => 0000000020080000
- [ 0.136754] EFI remap 0x00000000ba5f0000 => 00000000201d0000
- [ 0.142650] EFI remap 0x00000000ba640000 => 0000000020220000
- [ 0.148546] EFI remap 0x00000000bf660000 => 0000000020270000
- [ 0.154441] EFI remap 0x00000000bf6b0000 => 00000000202b0000
- [ 0.160333] EFI remap 0x00000000fff05000 => 0000000020305000
- [ 0.214496] Detected VIPT I-cache on CPU1
- [ 0.214533] CPU1: update cpu_capacity 360
- [ 0.214535] CPU1: Booted secondary processor [410fd034]
- [ 0.246508] Detected VIPT I-cache on CPU2
- [ 0.246525] CPU2: update cpu_capacity 360
- [ 0.246527] CPU2: Booted secondary processor [410fd034]
- [ 0.278539] Detected VIPT I-cache on CPU3
- [ 0.278554] CPU3: update cpu_capacity 360
- [ 0.278556] CPU3: Booted secondary processor [410fd034]
- [ 0.311073] Detected VIPT I-cache on CPU4
- [ 0.311079] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
- [ 0.311083] CPU features: Unsupported CPU feature variation detected.
- [ 0.311098] CPU4: update cpu_capacity 1024
- [ 0.311100] CPU4: Booted secondary processor [410fd092]
- [ 0.342602] Detected VIPT I-cache on CPU5
- [ 0.342605] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
- [ 0.342615] CPU5: update cpu_capacity 1024
- [ 0.342617] CPU5: Booted secondary processor [410fd092]
- [ 0.374645] Detected VIPT I-cache on CPU6
- [ 0.374649] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
- [ 0.374660] CPU6: update cpu_capacity 1024
- [ 0.374661] CPU6: Booted secondary processor [410fd092]
- [ 0.406682] Detected VIPT I-cache on CPU7
- [ 0.406685] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
- [ 0.406696] CPU7: update cpu_capacity 1024
- [ 0.406697] CPU7: Booted secondary processor [410fd092]
- [ 0.406746] Brought up 8 CPUs
- [ 0.559691] SMP: Total of 8 processors activated.
- [ 0.564444] CPU features: detected feature: 32-bit EL0 Support
- [ 0.570552] CPU: All CPU(s) started at EL2
- [ 0.574715] alternatives: patching kernel code
- [ 0.581211] devtmpfs: initialized
- [ 0.592317] DMI not present or invalid.
- [ 0.596313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.606163] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.613158] pinctrl core: initialized pinctrl subsystem
- [ 0.619016] NET: Registered protocol family 16
- [ 0.623780] schedtune: init normalization constants...
- [ 0.628971] schedtune: CLUSTER[0-3] min_pwr: 0 max_pwr: 55
- [ 0.635565] schedtune: CPU[0] min_pwr: 0 max_pwr: 283
- [ 0.642156] schedtune: CPU[1] min_pwr: 0 max_pwr: 283
- [ 0.648747] schedtune: CPU[2] min_pwr: 0 max_pwr: 283
- [ 0.655336] schedtune: CPU[3] min_pwr: 0 max_pwr: 283
- [ 0.661927] schedtune: CLUSTER[4-7] min_pwr: 0 max_pwr: 218
- [ 0.668517] schedtune: CPU[4] min_pwr: 0 max_pwr: 1105
- [ 0.675108] schedtune: CPU[5] min_pwr: 0 max_pwr: 1105
- [ 0.681700] schedtune: CPU[6] min_pwr: 0 max_pwr: 1105
- [ 0.688290] schedtune: CPU[7] min_pwr: 0 max_pwr: 1105
- [ 0.694884] schedtune: SYSTEM min_pwr: 0 max_pwr: 5825
- [ 0.701476] schedtune: using normalization constants mul: 1745268256 sh1: 1 sh2: 12
- [ 0.709210] schedtune: configured to support 5 boost groups
- [ 0.734845] cpuidle: using governor ladder
- [ 0.754983] cpuidle: using governor menu
- [ 0.759295] vdso: 2 pages (1 code @ ffff000008ca7000, 1 data @ ffff0000095b4000)
- [ 0.766771] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.773990] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.780301] Serial: AMBA PL011 UART driver
- [ 0.785005] pstore: using zlib compression
- [ 0.789408] console [pstore-1] enabled
- [ 0.793192] pstore: Registered ramoops as persistent store backend
- [ 0.799433] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
- [ 0.805367] pinctrl-single e896c000.pinmux: 459 pins at pa ffff000008047000 size 1836
- [ 0.813507] pinctrl-single fff11000.pinmux: 463 pins at pa ffff000008049000 size 1852
- [ 0.821500] pinctrl-single fc182000.pinmux: 10 pins at pa ffff00000804b000 size 40
- [ 0.829213] pinctrl-single ff37e000.pinmux: 12 pins at pa ffff00000804d000 size 48
- [ 0.837098] pinctrl-single e896c800.pinmux: 459 pins at pa ffff00000804f800 size 1836
- [ 0.845244] pinctrl-single fff11800.pinmux: 463 pins at pa ffff000008051800 size 1852
- [ 0.853223] pinctrl-single fc182800.pinmux: 10 pins at pa ffff000008053800 size 40
- [ 0.860933] pinctrl-single ff37e800.pinmux: 12 pins at pa ffff000008055800 size 48
- [ 0.894086] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 6, base_baud = 0) is a PL011 rev2
- [ 0.903205] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 7, base_baud = 0) is a PL011 rev2
- [ 0.912257] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 8, base_baud = 0) is a PL011 rev2
- [ 0.921145] console [ttyAMA6] enabled
- [ 0.921145] console [ttyAMA6] enabled
- [ 0.928496] bootconsole [pl11] disabled
- [ 0.928496] bootconsole [pl11] disabled
- [ 0.936344] hisi-dma64 fdf30000.dma: dma_channels:0x10 dma_requests:0x20 dma_min_chan:0x1
- [ 0.945209] hisi-dma64 fdf30000.dma: initialized
- [ 0.949826] hisi-dma64 fdf30000.dma: hisi_dma64_probe ok!
- [ 0.958569] HISI SPMI probe
- [ 0.985670] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.992881] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
- [ 1.000792] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
- [ 1.008697] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
- [ 1.016596] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
- [ 1.024493] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
- [ 1.032388] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
- [ 1.040278] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
- [ 1.048170] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
- [ 1.056064] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
- [ 1.063956] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
- [ 1.071845] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
- [ 1.079739] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
- [ 1.087627] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
- [ 1.095515] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
- [ 1.103406] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
- [ 1.111296] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
- [ 1.119186] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
- [ 1.127080] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
- [ 1.134986] pl061_gpio fff28000.gpio: PL061 GPIO chip @0x00000000fff28000 registered
- [ 1.142881] pl061_gpio fff29000.gpio: PL061 GPIO chip @0x00000000fff29000 registered
- [ 1.150794] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
- [ 1.158681] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
- [ 1.166578] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
- [ 1.174472] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
- [ 1.182369] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
- [ 1.190263] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
- [ 1.198160] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
- [ 1.206055] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
- [ 1.213949] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
- [ 1.221857] ACPI: Interpreter disabled.
- [ 1.242068] vgaarb: loaded
- [ 1.244863] SCSI subsystem initialized
- [ 1.248704] libata version 3.00 loaded.
- [ 1.252622] ssp-pl022 ffd70000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 1.259598] ssp-pl022 ffd70000.spi: mapped registers from 0x00000000ffd70000 to ffff000009899000
- [ 1.268409] ssp-pl022 ffd70000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
- [ 1.276068] usbcore: registered new interface driver usbfs
- [ 1.281575] usbcore: registered new interface driver hub
- [ 1.286932] usbcore: registered new device driver usb
- [ 1.291993] tcpc_class_init_1.1.1_G
- [ 1.295479] TCPC class init OK
- [ 1.298547] Init Richtek RegMap
- [ 1.302206] Linux video capture interface: v2.00
- [ 1.306838] pps_core: LinuxPPS API ver. 1 registered
- [ 1.311800] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.320936] PTP clock support registered
- [ 1.324901] dmi: Firmware registration failed.
- [ 1.329410] Registered efivars operations
- [ 1.333683] Ion: invalid heap-name in node iommu_info, please check the name
- [ 1.340819] Ion: invalid heap-name in node linear, please check the name
- [ 1.347613] Ion: node name [heap_sys_user], heap-name [sys_heap]
- [ 1.353619] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
- [ 1.360576] Ion: heap sys_heap base =0, try to find dynamic area
- [ 1.366666] Ion: name = sys_heap, table name carveout_gralloc
- [ 1.372493] Ion: name = sys_heap, table name
- [ 1.376932] Ion: name = sys_heap, table name
- [ 1.381369] Ion: name = sys_heap, table name
- [ 1.385808] Ion: name = sys_heap, table name
- [ 1.390254] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
- [ 1.397645] Ion: heap index 1 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
- [ 1.405296] Ion: heap carveout_gralloc base =0, try to find dynamic area
- [ 1.412078] Ion: name = carveout_gralloc, table name carveout_gralloc
- [ 1.418601] Ion: have found heap name carveout_gralloc base = 0xbb500000, size 31457280
- [ 1.426600] in hisi_ion_enable_iommu start
- [ 1.430701] of_get_iova_info:start_addr 0x40000, size 0xbffc0000 align 0x8000
- [ 1.437835] in hisi_ion_enable_iommu end
- [ 1.441750] Ion: id 0 name sys_heap base 0 size 0
- [ 1.446593] Ion: adding heap sys_heap of type 0 with 0@0
- [ 1.451900] Ion: id 1 name carveout_gralloc base 3142582272 size 31457280
- [ 1.462466] Ion: adding heap carveout_gralloc of type 2 with bb500000@1e00000
- [ 1.469716] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.475998] Bluetooth: Core ver 2.22
- [ 1.479577] NET: Registered protocol family 31
- [ 1.484018] Bluetooth: HCI device and connection manager initialized
- [ 1.490373] Bluetooth: HCI socket layer initialized
- [ 1.495248] Bluetooth: L2CAP socket layer initialized
- [ 1.500302] Bluetooth: SCO socket layer initialized
- [ 1.505427] no hisilicon,hisi-pmic-irq-num1 property set
- [ 1.510738] hisi_pmic 2-00: the platform don't support ext-interrupt.
- [ 1.517231] [hisi_pmic_probe]. pmic->irqs[0] = 304
- [ 1.522027] [hisi_pmic_probe]. pmic->irqs[1] = 305
- [ 1.526823] [hisi_pmic_probe]. pmic->irqs[2] = 306
- [ 1.531618] [hisi_pmic_probe]. pmic->irqs[3] = 307
- [ 1.536413] [hisi_pmic_probe]. pmic->irqs[4] = 308
- [ 1.541206] [hisi_pmic_probe]. pmic->irqs[5] = 309
- [ 1.546001] [hisi_pmic_probe]. pmic->irqs[6] = 310
- [ 1.550795] [hisi_pmic_probe]. pmic->irqs[7] = 311
- [ 1.555591] [hisi_pmic_probe]. pmic->irqs[8] = 312
- [ 1.560386] [hisi_pmic_probe]. pmic->irqs[9] = 313
- [ 1.565178] [hisi_pmic_probe]. pmic->irqs[10] = 314
- [ 1.570057] [hisi_pmic_probe]. pmic->irqs[11] = 315
- [ 1.574935] [hisi_pmic_probe]. pmic->irqs[12] = 316
- [ 1.579814] [hisi_pmic_probe]. pmic->irqs[13] = 317
- [ 1.584695] [hisi_pmic_probe]. pmic->irqs[14] = 318
- [ 1.589573] [hisi_pmic_probe]. pmic->irqs[15] = 319
- [ 1.594754] clocksource: Switched to clocksource arch_sys_counter
- [ 1.600911] VFS: Disk quotas dquot_6.6.0
- [ 1.604858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.611799] pnp: PnP ACPI: disabled
- [ 1.616903] <[hisi_dt_parse_ip_atf]: regulator_id=0, ppll0_clock_set_rate_flag=0>
- [ 1.624536] <[hisi_dt_parse_ip_atf]: regulator_id=1, ppll0_clock_set_rate_flag=0>
- [ 1.632045] vivobus: supplied by media1_subsys
- [ 1.636496] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
- [ 1.641899] <[hisi_dt_parse_ip_atf]: regulator_id=8, ppll0_clock_set_rate_flag=0>
- [ 1.649492] <[hisi_dt_parse_ip_atf]: regulator_id=2, ppll0_clock_set_rate_flag=0>
- [ 1.656995] vcodecsubsys: supplied by media2_subsys
- [ 1.661878] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
- [ 1.667280] <[hisi_dt_parse_ip_atf]: regulator_id=3, ppll0_clock_set_rate_flag=0>
- [ 1.674781] dsssubsys: supplied by vivobus
- [ 1.678883] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
- [ 1.684298] <[hisi_dt_parse_ip_atf]: regulator_id=4, ppll0_clock_set_rate_flag=0>
- [ 1.691800] ispsubsys: supplied by vivobus
- [ 1.695904] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
- [ 1.701305] <[hisi_dt_parse_ip_atf]: regulator_id=5, ppll0_clock_set_rate_flag=0>
- [ 1.708807] vdec: supplied by vcodecsubsys
- [ 1.712910] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
- [ 1.718315] <[hisi_dt_parse_ip_atf]: regulator_id=6, ppll0_clock_set_rate_flag=0>
- [ 1.725815] venc: supplied by vcodecsubsys
- [ 1.729921] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
- [ 1.735334] <[hisi_dt_parse_ip_atf]: regulator_id=7, ppll0_clock_set_rate_flag=0>
- [ 1.742837] isp_srt: supplied by ispsubsys
- [ 1.746939] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
- [ 1.752428] NET: Registered protocol family 2
- [ 1.756995] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 1.764397] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 1.771348] TCP: Hash tables configured (established 65536 bind 65536)
- [ 1.777903] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 1.784025] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 1.790653] NET: Registered protocol family 1
- [ 1.795018] PCI: CLS 0 bytes, default 128
- [ 1.799356] Freeing initrd memory: 1644K
- [ 1.803733] kvm [1]: 8-bit VMID
- [ 1.806878] kvm [1]: IDMAP page: c90000
- [ 1.810705] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 1.816886] kvm [1]: Hyp mode initialized successfully
- [ 1.822050] kvm [1]: virtual timer IRQ4
- [ 1.827516] audit: initializing netlink subsys (disabled)
- [ 1.832944] audit: type=2000 audit(1.723:1): initialized
- [ 1.838459] workingset: timestamp_bits=46 max_order=21 bucket_order=0
- [ 1.847293] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.853186] Registering sdcardfs 0.1
- [ 1.856926] fuse init (API version 7.26)
- [ 1.860957] 9p: Installing v9fs 9p2000 file system support
- [ 1.866544] SELinux: Registering netfilter hooks
- [ 1.873320] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 1.880716] io scheduler noop registered
- [ 1.884673] io scheduler cfq registered (default)
- [ 1.890107] libphy: mdio_driver_register: phy-bcm-ns2-pci
- [ 1.896717] Kirin-pcie f4000000.pcie: eye_param_vboost = [0xffffffff]
- [ 1.903157] Kirin-pcie f4000000.pcie: eye_param_iboost = [0xffffffff]
- [ 1.909596] Kirin-pcie f4000000.pcie: eye_param_pre = [0xffffffff]
- [ 1.915772] Kirin-pcie f4000000.pcie: eye_param_post = [0xffffffff]
- [ 1.922036] Kirin-pcie f4000000.pcie: eye_param_main = [0xffffffff]
- [ 1.962828] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
- [ 1.968405] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
- [ 1.976682] Kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
- [ 1.983038] pci_bus 0000:00: root bus resource [bus 00-01]
- [ 1.988524] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
- [ 1.998717] pci 0000:00:00.0: [19e5:3670] type 01 class 0x060400
- [ 2.004744] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
- [ 2.011102] pci 0000:00:00.0: supports D1 D2
- [ 2.015370] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 2.021521] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
- [ 2.032523] pci 0000:01:00.0: [10b5:8606] type 01 class 0x060400
- [ 2.038746] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf601ffff]
- [ 2.046679] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 2.062853] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.071758] pci 0000:02:01.0: [10b5:8606] type 01 class 0x060400
- [ 2.079603] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
- [ 2.086547] pci 0000:02:04.0: [10b5:8606] type 01 class 0x060400
- [ 2.094393] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
- [ 2.101314] pci 0000:02:05.0: [10b5:8606] type 01 class 0x060400
- [ 2.109158] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
- [ 2.116121] pci 0000:02:07.0: [10b5:8606] type 01 class 0x060400
- [ 2.123968] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
- [ 2.130959] pci 0000:02:09.0: [10b5:8606] type 01 class 0x060400
- [ 2.138802] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
- [ 2.146071] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.154184] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.162298] pci 0000:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.170407] pci 0000:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.178518] pci 0000:02:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.187204] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
- [ 2.194450] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
- [ 2.201700] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
- [ 2.209150] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
- [ 2.215382] pci 0000:06:00.0: reg 0x10: [io 0x0000-0x00ff]
- [ 2.221266] pci 0000:06:00.0: reg 0x18: [mem 0xf6000000-0xf6000fff 64bit]
- [ 2.228252] pci 0000:06:00.0: reg 0x20: [mem 0xf6000000-0xf6003fff 64bit pref]
- [ 2.236775] pci 0000:06:00.0: supports D1 D2
- [ 2.241043] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.248635] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
- [ 2.255886] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
- [ 2.262543] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 07
- [ 2.270023] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
- [ 2.276813] pci 0000:00:00.0: BAR 14: assigned [mem 0xf7000000-0xf71fffff]
- [ 2.283687] pci 0000:00:00.0: BAR 15: assigned [mem 0xf7200000-0xf72fffff pref]
- [ 2.290994] pci 0000:00:00.0: BAR 13: no space for [io size 0x1000]
- [ 2.297346] pci 0000:00:00.0: BAR 13: failed to assign [io size 0x1000]
- [ 2.304045] pci 0000:01:00.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
- [ 2.310919] pci 0000:01:00.0: BAR 15: assigned [mem 0xf7200000-0xf72fffff 64bit pref]
- [ 2.318746] pci 0000:01:00.0: BAR 0: assigned [mem 0xf7100000-0xf711ffff]
- [ 2.325580] pci 0000:01:00.0: BAR 13: no space for [io size 0x1000]
- [ 2.331930] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x1000]
- [ 2.338627] pci 0000:02:07.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
- [ 2.345498] pci 0000:02:07.0: BAR 15: assigned [mem 0xf7200000-0xf72fffff 64bit pref]
- [ 2.353323] pci 0000:02:07.0: BAR 13: no space for [io size 0x1000]
- [ 2.359671] pci 0000:02:07.0: BAR 13: failed to assign [io size 0x1000]
- [ 2.366368] pci 0000:02:01.0: PCI bridge to [bus 03]
- [ 2.371525] pci 0000:02:04.0: PCI bridge to [bus 04]
- [ 2.376680] pci 0000:02:05.0: PCI bridge to [bus 05]
- [ 2.381836] pci 0000:06:00.0: BAR 4: assigned [mem 0xf7200000-0xf7203fff 64bit pref]
- [ 2.389732] pci 0000:06:00.0: BAR 2: assigned [mem 0xf7000000-0xf7000fff 64bit]
- [ 2.397194] pci 0000:06:00.0: BAR 0: no space for [io size 0x0100]
- [ 2.403456] pci 0000:06:00.0: BAR 0: failed to assign [io size 0x0100]
- [ 2.410065] pci 0000:02:07.0: PCI bridge to [bus 06]
- [ 2.415090] pci 0000:02:07.0: bridge window [mem 0xf7000000-0xf70fffff]
- [ 2.421917] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff 64bit pref]
- [ 2.429742] pci 0000:02:09.0: PCI bridge to [bus 07]
- [ 2.434900] pci 0000:01:00.0: PCI bridge to [bus 02-07]
- [ 2.440184] pci 0000:01:00.0: bridge window [mem 0xf7000000-0xf70fffff]
- [ 2.447011] pci 0000:01:00.0: bridge window [mem 0xf7200000-0xf72fffff 64bit pref]
- [ 2.454836] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 2.460059] pci 0000:00:00.0: bridge window [mem 0xf7000000-0xf71fffff]
- [ 2.466845] pci 0000:00:00.0: bridge window [mem 0xf7200000-0xf72fffff pref]
- [ 2.474218] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
- [ 2.481178] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 2.487704] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt
- [ 2.494228] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt
- [ 2.500751] pci 0000:02:05.0: Signaling PME through PCIe PME interrupt
- [ 2.507273] pci 0000:02:07.0: Signaling PME through PCIe PME interrupt
- [ 2.513798] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
- [ 2.520321] pci 0000:02:09.0: Signaling PME through PCIe PME interrupt
- [ 2.526849] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
- [ 2.533946] aer 0000:00:00.0:pcie002: service driver aer loaded
- [ 2.540003] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
- [ 2.554018] pcieport 0000:02:07.0: enabling device (0000 -> 0002)
- [ 2.565613] hisi-asp-dma e804b000.asp_dmac: initialized
- [ 2.571359] xenfs: not registering filesystem on non-xen platform
- [ 2.577950] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.585030] SuperH (H)SCI(F) driver initialized
- [ 2.589720] msm_serial: driver initialized
- [ 2.593952] [drm] Initialized
- [ 2.597301] [drm] the device node is dpe
- [ 2.601253] [drm] the device remote node is dsi
- [ 2.606025] [drm] dss_pwm_clk:[80000000]->[83000000].
- [ 2.611138] [drm] adv match_node ok
- [ 2.614714] [drm] adv parse_dt ok , adv7511->type = 1 <0--ADV7511, 1--ADV7533>
- [ 2.622010] [drm] adv75xx->vdd = 1800000
- [ 2.626107] [drm] adv7533_init_regulators ok
- [ 2.635481] [drm] adv get gpio_pd ok
- [ 2.639208] [drm] adv devm_regmap_init_i2c ok
- [ 2.643796] [drm] regmap_read ok, regmap_read Rev.= 20
- [ 2.651342] [drm] host attach, client name=[mipi-hikey], id=1
- [ 2.657221] [drm] dsi cur_client is 1 <0->hdmi;1->panel>
- [ 2.662920] [drm] dss_version_tag=0x40.
- [ 2.666781] [drm] dss irq = 64.
- [ 2.670011] e8600000.dpe supply regulator_dsssubsys not found, using dummy regulator
- [ 2.677783] e8600000.dpe supply regulator_media_subsys not found, using dummy regulator
- [ 2.685811] in hisi_ion_enable_iommu start
- [ 2.689905] ion domain already init return domain
- [ 2.694679] [drm] host attach, client name=[adv7533], id=0
- [ 2.700172] [drm] connector init
- [ 2.703408] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
- [ 2.709758] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.716368] [drm] No driver support for vblank timestamp query.
- [ 2.722289] [drm] num_crtc=1, num_connector=2.
- [ 2.726736] [drm:drm_helper_disable_unused_functions] *ERROR* Called for atomic driver, this is not what you want.
- [ 2.737230] [drm] connected : regmap_read val = 0xf0
- [ 2.742278] [drm] hdmi connector status = 1
- [ 2.960421] random: fast init done
- [ 2.965046] Checking mode 1280x720@60 clock: 74250...[ 2.969926] OK
- [ 2.971587] Checking mode 720x480@60 clock: 27000...[ 2.976372] BAD
- [ 2.978116] Checking mode 720x576@50 clock: 27000...[ 2.982900] BAD
- [ 2.984644] Checking mode 1280x720@50 clock: 74250...[ 2.989515] OK
- [ 2.991173] Checking mode 1920x1080@50 clock: 148500...[ 2.996218] OK
- [ 2.997875] Checking mode 1440x900@60 clock: 88750...[ 3.002745] BAD
- [ 3.004491] Checking mode 1440x900@75 clock: 136750...[ 3.009448] BAD
- [ 3.011194] Checking mode 1440x900@85 clock: 157000...[ 3.016152] BAD
- [ 3.017895] Checking mode 800x600@60 clock: 40000...[ 3.022679] OK
- [ 3.024338] Checking mode 800x600@56 clock: 36000...[ 3.029121] BAD
- [ 3.030867] Checking mode 640x480@75 clock: 31500...[ 3.035650] BAD
- [ 3.037393] Checking mode 640x480@73 clock: 31500...[ 3.042177] BAD
- [ 3.043922] Checking mode 640x480@60 clock: 25175...[ 3.048705] BAD
- [ 3.050448] Checking mode 720x400@70 clock: 28320...[ 3.055232] BAD
- [ 3.056976] Checking mode 1280x1024@75 clock: 135000...[ 3.062019] BAD
- [ 3.063765] Checking mode 1024x768@75 clock: 78750...[ 3.068635] BAD
- [ 3.070378] Checking mode 1024x768@70 clock: 75000...[ 3.075248] OK
- [ 3.076905] Checking mode 1024x768@60 clock: 65000...[ 3.081776] BAD
- [ 3.083521] Checking mode 800x600@75 clock: 49500...[ 3.088304] BAD
- [ 3.090047] Checking mode 800x600@72 clock: 50000...[ 3.094831] BAD
- [ 3.096575] Checking mode 1920x1080@60 clock: 148500...[ 3.101618] OK
- [ 3.103277] Checking mode 1280x720@60 clock: 74176...[ 3.108147] BAD
- [ 3.109890] Checking mode 720x480@60 clock: 27027...[ 3.114675] BAD
- [ 3.116420] Checking mode 640x480@60 clock: 25200...[ 3.121204] BAD
- [ 3.122949] Checking mode 1920x1080@60 clock: 148352...[ 3.127993] BAD
- [ 3.129750] [drm] kms: can't enable cloning when we probably wanted to.
- [ 3.140007] [drm] fbdev->smem_start = 0x262144, fbdev->screen_base = 0xffff00000d001000
- [ 3.148118] kirin-drm e8600000.dpe: fb0: dss frame buffer device
- [ 3.171011] [drm] Initialized kirin 1.0.0 20170309 on minor 0
- [ 3.176873] mali e82c0000.mali: Continuing without Mali regulator control
- [ 3.183987] mali e82c0000.mali: GPU identified as 0x1 arch 6.2.2 r0p0 status 1
- [ 3.191352] mali e82c0000.mali: Using coherency mode 1 set from dtb
- [ 3.197777] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
- [ 3.202757] Error reading temperature for gpu thermal zone: -22
- [ 3.214986] mali e82c0000.mali: Probed as mali0
- [ 3.223253] brd: module loaded
- [ 3.228084] loop: module loaded
- [ 3.231436] (stk) :sysfs entries created
- [ 3.235386] (hci_tty): inside hci_tty_init
- [ 3.239521] (hci_tty): allocated 242, 0
- [ 3.243403] gpio_hub_probe: step in
- [ 3.247053] gpio_hub_init:gpio hub init status:0
- [ 3.252105] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 3.262715] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
- [ 3.272976] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
- [ 3.283322] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
- [ 3.314760] Error reading temperature for gpu thermal zone: -22
- [ 3.336027] scsi host0: ufshcd
- [ 3.350829] hisi_sas: driver version v1.6
- [ 3.355867] libphy: Fixed MDIO Bus: probed
- [ 3.360079] tun: Universal TUN/TAP device driver, 1.6
- [ 3.365129] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.371379] CAN device driver interface
- [ 3.385354] mcp251x spi32766.0: CANCTRL 0x87
- [ 3.389820] mcp251x spi32766.0 can0: MCP2515 successfully initialized.
- [ 3.396707] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 3.402536] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.408478] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 3.415434] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 3.421022] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 3.426760] Error reading temperature for gpu thermal zone: -22
- [ 3.434765] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 3.440696] sky2: driver version 1.30
- [ 3.444455] r8168 Gigabit Ethernet driver 8.045.08 loaded
- [ 3.449909] r8168 0000:06:00.0: enabling device (0000 -> 0002)
- [ 3.477761] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
- [ 3.489160] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
- [ 3.489160] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
- [ 3.489160] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
- [ 3.520163] PPP generic driver version 2.4.2
- [ 3.524480] PPP BSD Compression module registered
- [ 3.525815] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
- [ 3.529205] ufshcd-hisi ff3c0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
- [ 3.529523] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.534758] Error reading temperature for gpu thermal zone: -22
- [ 3.561356] PPP Deflate Compression module registered
- [ 3.566416] PPP MPPE Compression module registered
- [ 3.571204] NET: Registered protocol family 24
- [ 3.575182] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.584144] usbcore: registered new interface driver asix
- [ 3.589582] usbcore: registered new interface driver ax88179_178a
- [ 3.595684] usbcore: registered new interface driver cdc_ether
- [ 3.601525] usbcore: registered new interface driver net1080
- [ 3.607195] usbcore: registered new interface driver cdc_subset
- [ 3.613121] usbcore: registered new interface driver zaurus
- [ 3.618708] usbcore: registered new interface driver cdc_ncm
- [ 3.619119] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.632851] VFIO - User Level meta-driver version: 0.3
- [ 3.639774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.642764] Error reading temperature for gpu thermal zone: -22
- [ 3.652218] ehci-pci: EHCI PCI platform driver
- [ 3.656672] ehci-platform: EHCI generic platform driver
- [ 3.661951] ehci-exynos: EHCI EXYNOS driver
- [ 3.663043] scsi 0:0:0:0: Direct-Access TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.674263] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 3.679865] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.686052] ohci-pci: OHCI PCI platform driver
- [ 3.690510] ohci-platform: OHCI generic platform driver
- [ 3.695772] ohci-exynos: OHCI EXYNOS driver
- [ 3.700148] usbcore: registered new interface driver usb-storage
- [ 3.706528] [I/hisi_pd] pd_dpm_init
- [ 3.710049] [I/hisi_pd] pd_dpm_probe : +++++++++
- [ 3.714728] gpio_hub_power_on:regulator_enable
- [ 3.714985] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.715143] scsi 0:0:0:1: Direct-Access TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.715225] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.715230] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 3.715298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.716871] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.750761] Error reading temperature for gpu thermal zone: -22
- [ 3.763687] gpio_hub_change_typec_power: set typec vbus gpio to 0
- [ 3.769782] gpio_hub_switch_to_hub: switch to hub
- [ 3.771025] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.771235] scsi 0:0:0:2: Direct-Access TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.771270] sd 0:0:0:1: [sdb] Write Protect is off
- [ 3.771274] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 3.771360] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.772520] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 3.812839] [I/hisi_pd] pd_dpm_probe ++++
- [ 3.812839]
- [ 3.818598] rt1711h_init (1.1.8_G): initializing...
- [ 3.823018] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
- [ 3.823225] scsi 0:0:0:3: Direct-Access TOSHIBA THGAF4G9N4LBAIRB 0300 PQ: 0 ANSI: 6
- [ 3.823279] sd 0:0:0:2: [sdc] Write Protect is off
- [ 3.823282] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 3.823355] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.824495] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 3.858759] Error reading temperature for gpu thermal zone: -22
- [ 3.867760] rt1711h node found...
- [ 3.871017] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
- [ 3.871261] sd 0:0:0:3: [sdd] Write Protect is off
- [ 3.871264] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 3.871335] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.873145] GPT:Primary header thinks Alt. header is not at the end of the disk.
- [ 3.873147] GPT:7805956 != 15615999
- [ 3.873148] GPT:Alternate GPT header not at the end of the disk.
- [ 3.873148] GPT:7805956 != 15615999
- [ 3.873149] GPT: Use GNU Parted to correct GPT errors.
- [ 3.873166] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
- [ 3.874204] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 3.936211] rt1711_i2c_probe
- [ 3.939090] I2C functionality : OK...
- [ 3.944330] rt_parse_dt
- [ 3.946783] rt1711h_chipID = 0x2171
- [ 3.950264] regmap_device_register: name = rt1711-4e
- [ 3.955238] rt_regmap_rt1711-4e: rt register cache data init
- [ 3.960980] rt_regmap_rt1711-4e: cache cata init successfully
- [ 3.966772] Error reading temperature for gpu thermal zone: -22
- [ 3.972758] tcpc_device_register register tcpc device (type_c_port0)
- [ 3.979148] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
- [ 3.986540] PD Timer number = 37
- [ 3.989794] tcpci_timer_init : init OK
- [ 3.993560] pd_parse_pdata
- [ 3.996273] pd_parse_pdata src pdo data =
- [ 4.000277] pd_parse_pdata 0: 0x00019064
- [ 4.004194] pd_parse_pdata snk pdo data =
- [ 4.008196] pd_parse_pdata 0: 0x000190c8
- [ 4.012113] pd_parse_pdata 1: 0x0002d0c8
- [ 4.016029] pd_parse_pdata id vdos data =
- [ 4.020033] pd_parse_pdata 0: 0xd00029cf
- [ 4.023948] pd_parse_pdata 1: 0x00000000
- [ 4.027864] pd_parse_pdata 2: 0x00010000
- [ 4.031782] dpm_caps: local_dr_power
- [ 4.035351] dpm_caps: local_dr_data
- [ 4.038833] dpm_caps: local_ext_power
- [ 4.042486] dpm_caps: local_usb_comm
- [ 4.046055] dpm_caps: local_usb_suspend
- [ 4.049883] dpm_caps: local_high_cap
- [ 4.053452] dpm_caps: local_give_back
- [ 4.057107] dpm_caps: local_no_suspend
- [ 4.060849] dpm_caps: local_vconn_supply
- [ 4.064765] dpm_caps: attemp_discover_cable_dfp
- [ 4.069288] dpm_caps: attemp_enter_dp_mode
- [ 4.073378] dpm_caps: attemp_discover_cable
- [ 4.074774] Error reading temperature for gpu thermal zone: -22
- [ 4.083468] dpm_caps: attemp_discover_id
- [ 4.087383] dpm_caps: pr_reject_as_source
- [ 4.091385] dpm_caps: pr_reject_as_sink
- [ 4.095214] dpm_caps: pr_check_gp_source
- [ 4.099129] dpm_caps: pr_check_gp_sink
- [ 4.102870] dpm_caps: dr_reject_as_dfp
- [ 4.106609] dpm_caps: dr_reject_as_ufp
- [ 4.110352] dpm_caps: snk_prefer_low_voltage
- [ 4.114616] dpm_caps: snk_ignore_mismatch_current
- [ 4.119314] dpm_caps = 0xc010c10b
- [ 4.122620] [I/hisi_pd] PE:pd_core_init
- [ 4.126799] rt1711_init_alert name = type_c_port0
- [ 4.131500] rt1711_init_alert gpio # = 293
- [ 4.135605] GPIO requested...
- [ 4.138565] rt1711_init_alert : IRQ number = 293
- [ 4.143176] rt1711_init_alert : irq initialized...
- [ 4.147984] IRQF_NO_THREAD Test
- [ 4.152070] [I/hisi_pd] [TCPC-I]SkipAlert:0x0000
- [ 4.156775] [I/hisi_pd] TPC-I:typec_init: DRP
- [ 4.161580] [I/hisi_pd] TPC-I:** Unattached.SNK
- [ 4.166192] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 4.173582] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 4.181180] tcpc_device_irq_enable : tcpc irq enable OK!
- [ 4.182043] [I/hisi_pd] TPC-I:[CC_Alert] 5/0
- [ 4.182045] [I/hisi_pd] TPC-I:** AttachWait.SNK
- [ 4.182763] Error reading temperature for gpu thermal zone: -22
- [ 4.201389] [drm] client change to HDMI
- [ 4.205250] [drm] connected : regmap_read val = 0xf0
- [ 4.205251] [drm] hdmi connector status = 1
- [ 4.214595] rt1711_i2c_probe probe OK!
- [ 4.218533] mousedev: PS/2 mouse device common for all mice
- [ 4.224177] usbcore: registered new interface driver xpad
- [ 4.229586] usbcore: registered new interface driver usb_acecad
- [ 4.235516] usbcore: registered new interface driver aiptek
- [ 4.241098] usbcore: registered new interface driver gtco
- [ 4.246507] usbcore: registered new interface driver hanwang
- [ 4.252176] usbcore: registered new interface driver kbtab
- [ 4.258190] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
- [ 4.264544] i2c /dev entries driver
- [ 4.268515] [ISP] isp_init: enter!
- [ 4.272075] [ISP] isp_probe: enter!
- [ 4.275600] [ISP] isp_getdts: clock rate 24000000, pool size 0x1000000[ 4.288351] [ISP] isp_probe: exit!
- [ 4.291852] [ISP] isp_init: exit!
- [ 4.295226] usbcore: registered new interface driver uvcvideo
- [ 4.300968] USB Video Class driver (1.1.1)
- [ 4.302065] [I/hisi_pd] TPC-I:[CC_Change] 5/0
- [ 4.302067] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 4.302068] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 4.302069] [I/hisi_pd] TPC-I:** Attached.SNK
- [ 4.302070] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 4.302070] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 4.302514] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 4.302516] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
- [ 4.302518] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
- [ 4.302520] [I/hisi_pd] TPC-I:Attached-> SINK
- [ 4.302521] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
- [ 4.302523] [I/hisi_pd] pd_dpm_set_typec_state = 2
- [ 4.302524] [I/hisi_pd] pd_dpm_set_cc_orientation cc_orientation =0
- [ 4.302531] [I/hisi_pd] [TCPC-I]usb_port_attached
- [ 4.302543] [I/hisi_pd] pd_dpm_report_device_attach
- [ 4.302570] gpio_hub_change_typec_power: typec power no change
- [ 4.302577] gpio_hub_switch_to_typec: switch to typec
- [ 4.407031] device-mapper: uevent: version 1.0.3
- [ 4.411766] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
- [ 4.420260] Bluetooth: HCI UART driver ver 2.3
- [ 4.424724] Bluetooth: HCI UART protocol H4 registered
- [ 4.429870] Bluetooth: HCI UART protocol LL registered
- [ 4.435260] (stc): chnl_id list empty :4 [ 4.439199] (stk) : st_kim_start
- [ 4.439411] sdhci: Secure Digital Host Controller Interface driver
- [ 4.439411] sdhci: Copyright(c) Pierre Ossman
- [ 4.439536] Synopsys Designware Multimedia Card Interface Driver
- [ 4.439770] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 4.441972] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
- [ 4.442038] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
- [ 4.442042] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
- [ 4.442060] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,256 deep fifo
- [ 4.442155] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
- [ 4.445023] Checking mode 1920x1080@60 clock: 148500...
- [ 4.445023] OK
- [ 4.445025] Checking mode 1920x1080@50 clock: 148500...
- [ 4.445025] OK
- [ 4.445026] Checking mode 1280x720@60 clock: 74250...
- [ 4.445026] OK
- [ 4.445027] Checking mode 1280x720@50 clock: 74250...
- [ 4.445028] OK
- [ 4.445028] Checking mode 1024x768@70 clock: 75000...
- [ 4.445029] OK
- [ 4.445029] Checking mode 800x600@60 clock: 40000...
- [ 4.445029] OK
- [ 4.445030] Checking mode 720x480@60 clock: 27000...
- [ 4.445030] BAD
- [ 4.445031] Checking mode 720x576@50 clock: 27000...
- [ 4.445031] BAD
- [ 4.445032] Checking mode 1440x900@60 clock: 88750...
- [ 4.445032] BAD
- [ 4.445033] Checking mode 1440x900@75 clock: 136750...
- [ 4.445033] BAD
- [ 4.445034] Checking mode 1440x900@85 clock: 157000...
- [ 4.445034] BAD
- [ 4.445035] Checking mode 800x600@56 clock: 36000...
- [ 4.445035] BAD
- [ 4.445035] Checking mode 640x480@75 clock: 31500...
- [ 4.445035] BAD
- [ 4.445036] Checking mode 640x480@73 clock: 31500...
- [ 4.445036] BAD
- [ 4.445038] Checking mode 640x480@60 clock: 25175...
- [ 4.445038] BAD
- [ 4.445038] Checking mode 720x400@70 clock: 28320...
- [ 4.445038] BAD
- [ 4.445039] Checking mode 1280x1024@75 clock: 135000...
- [ 4.445039] BAD
- [ 4.445040] Checking mode 1024x768@75 clock: 78750...
- [ 4.445040] BAD
- [ 4.445041] Checking mode 1024x768@60 clock: 65000...
- [ 4.445041] BAD
- [ 4.445042] Checking mode 800x600@75 clock: 49500...
- [ 4.445042] BAD
- [ 4.445043] Checking mode 800x600@72 clock: 50000...
- [ 4.445043] BAD
- [ 4.445044] Checking mode 1280x720@60 clock: 74176...
- [ 4.445044] BAD
- [ 4.445044] Checking mode 720x480@60 clock: 27027...
- [ 4.445044] BAD
- [ 4.445045] Checking mode 640x480@60 clock: 25200...
- [ 4.445045] BAD
- [ 4.445046] Checking mode 1920x1080@60 clock: 148352...
- [ 4.445046] BAD
- [ 4.445115] [drm] +.
- [ 4.445115] [drm] -.
- [ 4.445159] [drm] dss_pri_clk:[300000000]->[300000000].
- [ 4.445191] [drm] dss_mmbuf_clk:[238000000]->[237142858].
- [ 4.445221] [drm] mode->clock(org) = 148500
- [ 4.445222] [drm] HDMI real need clock = 144000000
- [ 4.445224] [drm] postdiv1=0x1, POSTDIV2=0x1
- [ 4.445258] [drm] dss_pxl0_clk [144000000]->[144000000]
- [ 4.445314] [drm] isr_s1 = 0x10000!
- [ 4.445315] [drm] isr_s2 = 0x11!
- [ 4.460978] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 4.480029] dwmmc_k3 ff37f000.dwmmc1: 1 slots initialized
- [ 4.480127] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 4.482222] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
- [ 4.482252] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
- [ 4.482256] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
- [ 4.482266] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,256 deep fifo
- [ 4.536044] [drm] Expected : lane_clock = 864 M
- [ 4.536213] [drm] burst_mode = 0x0 (DSI_NON_BURST_SYNC_PULSES => 0)
- [ 4.536214] [drm] hsa_time=33, hbp_time=111, hline_time=1650
- [ 4.536215] [drm] lane_byte_clk=108000000, pixel_clk=144000000
- [ 4.580783] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 4.598788] dwmmc_k3 fc183000.dwmmc2: 1 slots initialized
- [ 4.598898] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.602000] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.602266] hidraw: raw HID events driver (C) Jiri Kosina
- [ 4.603222] usbcore: registered new interface driver usbhid
- [ 4.603222] usbhid: USB HID core driver
- [ 4.603575] ashmem: initialized
- [ 4.604594] hisi_ddr_devfreq ddr_devfreq: init success
- [ 4.605682] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
- [ 4.605853] hifi_misc [E][473318]:hifi_check_img_loaded:1472: hifi img is loaded fail: 0xff3fe77f.
- [ 4.606557] hifi pdev name[hifidsp].
- [ 4.606784] DRV_IPCIntInit begin.
- [ 4.606785] DRV_IPCIntInit line = 220
- [ 4.606790] BSP_DRV_IPCIntInit end.
- [ 4.606791] func = mailbox_init, line = 695 baseaddr = 0x8e712c00
- [ 4.606807] mem_remap_type: phys_addr:0x8e712c00 size:0x00010000 npages:17 vaddr:ffff00000bc3ac00 offset:0x00000c00
- [ 4.606809] i = 0, head_addr = 0xffff00000bc3acf0, data_addr = 0xffff00000bc3e0b0
- [ 4.606810] i = 1, head_addr = 0xffff00000bc3ac50, data_addr = 0xffff00000bc3b0b0
- [ 4.606811] i = 2, head_addr = 0xffff00000bc3ad18, data_addr = 0xffff00000bc3e0b0
- [ 4.606811] i = 3, head_addr = 0xffff00000bc3ac78, data_addr = 0xffff00000bc3c8b0
- [ 4.606813] <<<<<<<<<<<<<<mailbox_create_box cpu_id = 0>>>>>>>>>>>>>>
- [ 4.606815] ******************func = mailbox_init_all_handle line = 530 src_id = 1 dst_id = 4******************
- [ 4.606816] ******************func = mailbox_init_all_handle line = 530 src_id = 0 dst_id = 4******************
- [ 4.606818] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 1******************
- [ 4.606818] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 0******************
- [ 4.607122] mb init OK!
- [ 4.607364] mb->local_id = 0 dst_id = 0
- [ 4.607368] hifi_misc [I][473368]:ap_ipc_int_init:914: Enter ap_ipc_int_init
- [ 4.607369] hifi_misc [I][473368]:ap_ipc_int_init:919: Exit ap_ipc_int_init
- [ 4.607392] [cambricon_ipu_init]: platform device and driver register!
- [ 4.607435] [cambricon_ipu_probe]: Initializing IPU device!
- [ 4.607441] [cambricon_ipu_probe]:IPU FIFO_TaskElements init success, queue size: 4096
- [ 4.607468] [cambricon_ipu_probe]: platform_get_irq_byname:65
- [ 4.607482] ff400000.cambricon-ipu supply vipu not found, using dummy regulator
- [ 4.607521] [cambricon_ipu_probe]:Get regulator ip succuss! dev-num-resouce:3
- [ 4.607550] [ipu_get_feature_tree]: the platform is kirin970_cs
- [ 4.607800] [cambricon_ipu_probe]: IPU Require IRQ Succeeded
- [ 4.607910] [ipu_clock_init]: IPU_DEBUG vcodecbus_clk_ptr is fffffffffffffffe
- [ 4.607914] [ipu_clock_init]: get clk rate done, start clk rate:900000000, stop clk rate:332000000
- [ 4.607935] of_get_iova_info:start_addr 0x40000, size 0x80000000 align 0x40000
- [ 4.607938] [ipu_enable_iommu] success,ipu_smmu_domain=0xffff8001b7bd6630, dev->bus is 0xffff000009660b88
- [ 4.608000] [cambricon_ipu_probe]: Succeeded to initialize ipu device.
- [ 4.608018] IFO:<493:VENC_DRV_ModInit>enter VENC_DRV_ModInit()
- [ 4.608018]
- [ 4.608212] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
- [ 4.608212]
- [ 4.608219] IFO:<368:VENC_DRV_SetupCdev>enter VENC_DRV_SetupCdev()
- [ 4.608219]
- [ 4.608263] IFO:<399:VENC_DRV_SetupCdev>exit VENC_DRV_SetupCdev()
- [ 4.608263]
- [ 4.608264] in hisi_ion_enable_iommu start
- [ 4.608265] ion domain already init return domain
- [ 4.608293] IFO:<131:Venc_GetDtsConfigInfo>venc_clk_rate: highRate:554000000, normalRate:450000000, lowRate:238000000
- [ 4.608293]
- [ 4.608295] ERR:<137:Venc_GetDtsConfigInfo>get venc qos mode failed set default
- [ 4.608295]
- [ 4.608296] IFO:<143:Venc_GetDtsConfigInfo>SmmuPageBaseAddr is 0xffff000008e12138
- [ 4.608296]
- [ 4.608297] IFO:<458:VENC_DRV_Probe>omxvenc probe successfully
- [ 4.608297]
- [ 4.608321] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
- [ 4.608321]
- [ 4.608322] IFO:<432:VENC_DRV_Probe>venc device detected already
- [ 4.608322]
- [ 4.608331] IFO:<506:VENC_DRV_ModInit>success
- [ 4.608331]
- [ 4.608332] IFO:<510:VENC_DRV_ModInit>exit VENC_DRV_ModInit()
- [ 4.608332]
- [ 4.608479] in hisi_ion_enable_iommu start
- [ 4.608480] ion domain already init return domain
- [ 4.608529] Already probe omxvdec
- [ 4.608954] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
- [ 4.609075] u32 classifier
- [ 4.609075] Actions configured
- [ 4.609079] Netfilter messages via NETLINK v0.30.
- [ 4.609287] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
- [ 4.609384] ctnetlink v0.93: registering with nfnetlink.
- [ 4.609571] xt_time: kernel timezone is -0000
- [ 4.621333] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.621390] arp_tables: arp_tables: (C) 2002 David S. Miller
- [ 4.623258] Initializing XFRM netlink socket
- [ 4.623418] NET: Registered protocol family 10
- [ 4.624055] mip6: Mobile IPv6
- [ 4.624084] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.634869] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 4.635047] NET: Registered protocol family 17
- [ 4.635055] NET: Registered protocol family 15
- [ 4.635056] can: controller area network core (rev 20120528 abi 9)
- [ 4.635069] NET: Registered protocol family 29
- [ 4.635076] can: raw protocol (rev 20120528)
- [ 4.635077] can: broadcast manager protocol (rev 20161123 t)
- [ 4.635080] can: netlink gateway (rev 20130117) max_hops=1
- [ 4.635381] Bluetooth: RFCOMM TTY layer initialized
- [ 4.635383] Bluetooth: RFCOMM socket layer initialized
- [ 4.635390] Bluetooth: RFCOMM ver 1.11
- [ 4.635393] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.635395] Bluetooth: HIDP socket layer initialized
- [ 4.635481] 9pnet: Installing 9P2000 support
- [ 4.636776] Registered cp15_barrier emulation handler
- [ 4.641732] Registered setend emulation handler
- [ 4.641936] registered taskstats version 1
- [ 4.645232] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 4.647469] mmc1: new SDIO card at address 0001
- [ 4.648246] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
- [ 4.648249] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
- [ 4.648250] wlcore: WARNING falling back to default config
- [ 4.651333] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
- [ 4.651335] asoc-simple-card soc:sound: adv7511 <-> e804f800.hisi_i2s mapping ok
- [ 4.652389] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 4.655240] rtc-efi rtc-efi: setting system clock to 1970-01-01 00:39:51 UTC (2391)
- [ 4.655241] [ISP] ov5640_main_module_init: enter!
- [ 4.655289] [ISP] ov5640_main_probe: enter!
- [ 4.763839] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
- [ 4.763841] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
- [ 4.764077] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
- [ 4.764078] Pending event is same --> ignore this event 2
- [ 4.764184] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 4.888330] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
- [ 4.891434] wlcore: loaded
- [ 4.909770] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 4.909773] [ISP] isp_i2c_xfer: I2C abort
- [ 4.909775] [ISP] isp_i2c_write_reg: write reg fail
- [ 4.909776] [ISP] ov5640_main_power: could not set init registers
- [ 4.909777] [ISP] isp_i2c_read_reg: read[0x300a]
- [ 4.912791] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 4.912793] [ISP] isp_i2c_xfer: I2C abort
- [ 4.912795] [ISP] isp_i2c_read_reg: read reg fail
- [ 4.912796] [ISP] ov5640_main_get_chip_id: get chip id high[255] fail
- [ 4.912814] [ISP] ov5640_main_probe: chip id is 0x0
- [ 4.912815] [ISP] ov5640_main_probe: chip id is 0x0, probe failed
- [ 4.912824] hisi-ov5640_main: probe of e8400000.isp:hisi,ov5640_main failed with error -1
- [ 4.912864] [ISP] ov5640_main_module_init: exit!
- [ 4.912865] [ISP] ov5640_sub_module_init: enter!
- [ 4.912915] [ISP] ov5640_sub_probe: enter!
- [ 5.146764] [drm] +.
- [ 5.146769] [drm] dss_pwm_clk clk_enable successed, ret=0!
- [ 5.165957] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 5.165960] [ISP] isp_i2c_xfer: I2C abort
- [ 5.165960] [ISP] isp_i2c_write_reg: write reg fail
- [ 5.165961] [ISP] ov5640_sub_power: could not set init registers
- [ 5.165962] [ISP] isp_i2c_read_reg: read[0x300a]
- [ 5.168977] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 5.168979] [ISP] isp_i2c_xfer: I2C abort
- [ 5.168980] [ISP] isp_i2c_read_reg: read reg fail
- [ 5.168981] [ISP] ov5640_sub_get_chip_id: get chip id high[255] fail
- [ 5.168994] [ISP] ov5640_sub_probe: chip id is 0x0, probe failed
- [ 5.168999] hisi-ov5640_sub: probe of e8400000.isp:hisi,ov5640_sub failed with error -1
- [ 5.169020] [ISP] ov5640_sub_module_init: exit!
- [ 5.169118] clk: Not disabling unused clocks
- [ 5.169130] wlan-en-regulator: disabling
- [ 5.169152] <[hisi_ip_to_atf_is_enabled]:regulator_id=0>
- [ 5.169153] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
- [ 5.169155] <[hisi_ip_to_atf_is_enabled]:regulator_id=8>
- [ 5.169156] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
- [ 5.169157] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
- [ 5.169158] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
- [ 5.169159] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
- [ 5.169159] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
- [ 5.169160] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
- [ 5.169162] ALSA device list:
- [ 5.169163] #0: hikey-hdmi
- [ 5.354942] [drm] bl_level is 255
- [ 5.354943] [drm] bl_level=255.
- [ 5.357358] [drm] connected : regmap_read val = 0xf0
- [ 5.357359] [drm] hdmi connector status = 1
- [ 5.368401] Checking mode 1920x1080@60 clock: 148500...
- [ 5.368401] OK
- [ 5.368402] Checking mode 1920x1080@50 clock: 148500...
- [ 5.368402] OK
- [ 5.368403] Checking mode 1280x720@60 clock: 74250...
- [ 5.368403] OK
- [ 5.368405] Checking mode 1280x720@50 clock: 74250...
- [ 5.368405] OK
- [ 5.368406] Checking mode 1024x768@70 clock: 75000...
- [ 5.368406] OK
- [ 5.368407] Checking mode 800x600@60 clock: 40000...
- [ 5.368407] OK
- [ 5.368408] Checking mode 720x480@60 clock: 27000...
- [ 5.368408] BAD
- [ 5.368409] Checking mode 720x576@50 clock: 27000...
- [ 5.368409] BAD
- [ 5.368410] Checking mode 1440x900@60 clock: 88750...
- [ 5.368410] BAD
- [ 5.368410] Checking mode 1440x900@75 clock: 136750...
- [ 5.368411] BAD
- [ 5.368411] Checking mode 1440x900@85 clock: 157000...
- [ 5.368411] BAD
- [ 5.368413] Checking mode 800x600@56 clock: 36000...
- [ 5.368413] BAD
- [ 5.368414] Checking mode 640x480@75 clock: 31500...
- [ 5.368414] BAD
- [ 5.368414] Checking mode 640x480@73 clock: 31500...
- [ 5.368414] BAD
- [ 5.368415] Checking mode 640x480@60 clock: 25175...
- [ 5.368415] BAD
- [ 5.368416] Checking mode 720x400@70 clock: 28320...
- [ 5.368416] BAD
- [ 5.368417] Checking mode 1280x1024@75 clock: 135000...
- [ 5.368417] BAD
- [ 5.368418] Checking mode 1024x768@75 clock: 78750...
- [ 5.368418] BAD
- [ 5.368419] Checking mode 1024x768@60 clock: 65000...
- [ 5.368419] BAD
- [ 5.368420] Checking mode 800x600@75 clock: 49500...
- [ 5.368420] BAD
- [ 5.368420] Checking mode 800x600@72 clock: 50000...
- [ 5.368420] BAD
- [ 5.368421] Checking mode 1280x720@60 clock: 74176...
- [ 5.368421] BAD
- [ 5.368422] Checking mode 720x480@60 clock: 27027...
- [ 5.368422] BAD
- [ 5.368423] Checking mode 640x480@60 clock: 25200...
- [ 5.368423] BAD
- [ 5.368424] Checking mode 1920x1080@60 clock: 148352...
- [ 5.368424] BAD
- [ 5.848336] uart-pl011 fff32000.serial: no DMA platform data
- [ 5.854733] EXT4-fs (sdd12): couldn't mount as ext3 due to feature incompatibilities
- [ 5.865113] EXT4-fs (sdd12): mounted filesystem without journal. Opts: (null)
- [ 5.872294] VFS: Mounted root (ext4 filesystem) readonly on device 8:60.
- [ 5.879389] devtmpfs: mounted
- [ 5.883351] Freeing unused kernel memory: 4096K
- [ 5.899227] init: init first stage started!
- [ 5.903583] init: Using Android DT directory /proc/device-tree/firmware/android/
- [ 5.911015] init: First stage mount skipped (missing/incompatible fstab in device tree)
- [ 5.919024] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
- [ 5.925844] init: Loading SELinux policy
- [ 5.934173] SELinux: 8192 avtab hash slots, 17547 rules.
- [ 5.942048] SELinux: 8192 avtab hash slots, 17547 rules.
- [ 5.947365] SELinux: 1 users, 4 roles, 1253 types, 0 bools, 1 sens, 1024 cats[ 5.953108] (stk) :ldisc_install = 1
- [ 5.957988] SELinux: 93 classes, 17547 rules
- [ 5.963042] SELinux: Completing initialization.
- [ 5.967659] SELinux: Setting up existing superblocks.
- [ 5.997713] audit: type=1403 audit(2392.839:2): policy loaded auid=4294967295 ses=4294967295
- [ 6.006311] selinux: SELinux: Loaded policy from /sepolicy
- [ 6.006311]
- [ 6.018151] selinux: SELinux: Loaded file_contexts
- [ 6.018151]
- [ 6.026790] init: init second stage started!
- [ 6.035318] init: Using Android DT directory /proc/device-tree/firmware/android/
- [ 6.044462] selinux: SELinux: Loaded file_contexts
- [ 6.044462]
- [ 6.050740] init: Running restorecon...
- [ 6.055880] selinux: SELinux: Could not stat /dev/block: No such file or directory.
- [ 6.055880]
- [ 6.065196] init: waitid failed: No child processes
- [ 6.070109] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
- [ 6.082811] init: Couldn't load property file '/prop.default': open() failed: No su┌───────────────────────────────┐e or directory
- [ 6.096455] init: Couldn't load property file '/odm/default.prop': open() failed: N│ │ file or directory
- [ 6.108558] init: Couldn't load property file '/vendor/default.prop': open() failed│ Cannot open /dev/ttyXRUSB0! │uch file or directory
- [ 6.162364] ueventd: ueventd started! │ │
- [ 6.171487] selinux: SELinux: Loaded file_contexts └───────────────────────────────┘
- [ 6.171487]
- [ 6.177945] ueventd: Parsing file /ueventd.rc...
- [ 6.183870] ueventd: Parsing file /vendor/ueventd.rc...
- [ 6.189200] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
- [ 6.199283] ueventd: Parsing file /odm/ueventd.rc...
- [ 6.204296] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
- [ 6.214208] ueventd: Parsing file /ueventd.hikey970.rc...
- [ 6.220560] ueventd: [libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt
- [ 6.295774] ueventd: Coldboot took 0.067 seconds
- [ 6.319533] Registered swp emulation handler
- [ 6.325156] audit: type=1400 audit(2393.167:3): avc: denied { write } for pid=1 comm="init" name="enabled" dev="sysfs" ino=7783 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissi1
- [ 6.343717] audit: type=1400 audit(2393.187:4): avc: denied { open } for pid=1 comm="init" path="/sys/kernel/mm/transparent_hugepage/enabled" dev="sysfs" ino=7783 scontext=u:r:init:s0 tcontext=u:obj1
- [ 6.373911] watchdogd: watchdogd started (interval 10, margin 20)!
- [ 6.380144] watchdogd: Failed to open /dev/watchdog: No such file or directory
- [ 6.392919] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,discard,barrier=1
- [ 6.408412] EXT4-fs (sdd15): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,discard,barrier=1
- [ 6.424545] audit: type=1400 audit(2393.267:5): avc: denied { setattr } for pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532068 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file p1
- [ 6.444211] audit: type=1400 audit(2393.287:6): avc: denied { write } for pid=1 comm="init" name="/" dev="debugfs" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
- [ 6.461958] audit: type=1400 audit(2393.303:7): avc: denied { add_name } for pid=1 comm="init" name="sched_features" scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
- [ 6.479377] audit: type=1400 audit(2393.323:8): avc: denied { create } for pid=1 comm="init" name="sched_features" scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
- [ 6.511647] audit: type=1400 audit(2393.355:9): avc: denied { getattr } for pid=1 comm="init" path="/data/nativetest" dev="sdd15" ino=17 scontext=u:r:init:s0 tcontext=u:object_r:nativetest_data_file1
- [ 6.532267] audit: type=1400 audit(2393.375:10): avc: denied { read } for pid=1 comm="init" name="nativetest" dev="sdd15" ino=17 scontext=u:r:init:s0 tcontext=u:object_r:nativetest_data_file:s0 tcla1
- [ 6.578946] file system registered
- [ 6.982967] (stk) :ldisc installation timeout[ 6.987188] (stk) :ldisc_install = 0
- (stk) : timed out waiting for ldisc to be un-installed[ 8.118816] (stk) :ldisc_install = 1
- (stk) :ldisc installation timeout[ 9.129920] (stk) :ldisc_install = 0
- [ 9.466730] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
- [ 9.472588] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
- [ 9.478681] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
- [ 9.484524] Pending event is same --> ignore this event 2
- [ 9.490052] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 10.150998] (stk) : timed out waiting for ldisc to be un-installed[ 10.264029] (stk) :ldisc_install = 1
- (stk) :ldisc installation timeout[ 11.273879] (stk) :ldisc_install = 0
- (stk) : timed out waiting for ldisc to be un-installed[ 12.406718] (stk) :ldisc_install = 1
- (stk) :ldisc installation timeout[ 13.418419] (stk) :ldisc_install = 0
- [ 14.198408] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
- [ 14.204302] [I/hisi_pd] pd_dpm_handle_pe_event unkonw event
- [ 14.210394] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
- [ 14.216241] Pending event is same --> ignore this event 2
- [ 14.221755] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 14.439526] (stk) : timed out waiting for ldisc to be un-installed[ 14.552605] (stk) :ldisc_install = 1
- (stk) :ldisc installation timeout[ 15.561862] (stk) :ldisc_install = 0
- (stk) : timed out waiting for ldisc to be un-installed[ 16.695282] (stk) :ldisc_install = 1
- (stk) :ldisc installation timeout[ 17.706419] (stk) :ldisc_install = 0
- (stk) : timed out waiting for ldisc to be un-installed[ 18.733776] Bluetooth: st_register failed -22
- [ 18.928587] [I/hisi_pd] PE:TYPE-C Only Charger!
- [ 18.933267] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
- [ 18.939115] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
- [ 18.945910] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
- [ 18.953676] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=8,+++
- [ 72.147111] random: crng init done
Add Comment
Please, Sign In to add comment