API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 18th, 2018
191
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.23 KB | None | 0 0
raw download clone embed print report
  1. % sudo smartctl -x /dev/ada0
  2. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
  3. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Red
  7. Device Model: WDC WD50EFRX-68MYMN1
  8. Serial Number: WD-WX51H3420969
  9. LU WWN Device Id: 5 0014ee 26099f221
  10. Firmware Version: 82.00A82
  11. User Capacity: 5,000,981,078,016 bytes [5.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 5700 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Sun Nov 18 12:06:15 2018 PST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is: Unavailable
  21. APM feature is: Unavailable
  22. Rd look-ahead is: Enabled
  23. Write cache is: Enabled
  24. DSN feature is: Unavailable
  25. ATA Security is: Disabled, NOT FROZEN [SEC1]
  26. Wt Cache Reorder: Enabled
  27.  
  28. === START OF READ SMART DATA SECTION ===
  29. SMART overall-health self-assessment test result: PASSED
  30.  
  31. General SMART Values:
  32. Offline data collection status: (0x00) Offline data collection activity
  33. was never started.
  34. Auto Offline Data Collection: Disabled.
  35. Self-test execution status: ( 0) The previous self-test routine completed
  36. without error or no self-test has ever
  37. been run.
  38. Total time to complete Offline
  39. data collection: (57120) seconds.
  40. Offline data collection
  41. capabilities: (0x7b) SMART execute Offline immediate.
  42. Auto Offline data collection on/off support.
  43. Suspend Offline collection upon new
  44. command.
  45. Offline surface scan supported.
  46. Self-test supported.
  47. Conveyance Self-test supported.
  48. Selective Self-test supported.
  49. SMART capabilities: (0x0003) Saves SMART data before entering
  50. power-saving mode.
  51. Supports SMART auto save timer.
  52. Error logging capability: (0x01) Error logging supported.
  53. General Purpose Logging supported.
  54. Short self-test routine
  55. recommended polling time: ( 2) minutes.
  56. Extended self-test routine
  57. recommended polling time: ( 570) minutes.
  58. Conveyance self-test routine
  59. recommended polling time: ( 5) minutes.
  60. SCT capabilities: (0x303d) SCT Status supported.
  61. SCT Error Recovery Control supported.
  62. SCT Feature Control supported.
  63. SCT Data Table supported.
  64.  
  65. SMART Attributes Data Structure revision number: 16
  66. Vendor Specific SMART Attributes with Thresholds:
  67. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  68. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  69. 3 Spin_Up_Time POS--K 214 207 021 - 8291
  70. 4 Start_Stop_Count -O--CK 100 100 000 - 52
  71. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  72. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  73. 9 Power_On_Hours -O--CK 057 057 000 - 31555
  74. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  75. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  76. 12 Power_Cycle_Count -O--CK 100 100 000 - 52
  77. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 45
  78. 193 Load_Cycle_Count -O--CK 200 200 000 - 1311
  79. 194 Temperature_Celsius -O---K 119 108 000 - 33
  80. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  81. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  82. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  83. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  84. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  85. ||||||_ K auto-keep
  86. |||||__ C event count
  87. ||||___ R error rate
  88. |||____ S speed/performance
  89. ||_____ O updated online
  90. |______ P prefailure warning
  91.  
  92. General Purpose Log Directory Version 1
  93. SMART Log Directory Version 1 [multi-sector log support]
  94. Address Access R/W Size Description
  95. 0x00 GPL,SL R/O 1 Log Directory
  96. 0x01 SL R/O 1 Summary SMART error log
  97. 0x02 SL R/O 5 Comprehensive SMART error log
  98. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  99. 0x06 SL R/O 1 SMART self-test log
  100. 0x07 GPL R/O 1 Extended self-test log
  101. 0x09 SL R/W 1 Selective self-test log
  102. 0x10 GPL R/O 1 NCQ Command Error log
  103. 0x11 GPL R/O 1 SATA Phy Event Counters log
  104. 0x21 GPL R/O 1 Write stream error log
  105. 0x22 GPL R/O 1 Read stream error log
  106. 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
  107. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  108. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  109. 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
  110. 0xb7 GPL,SL VS 40 Device vendor specific log
  111. 0xbd GPL,SL VS 1 Device vendor specific log
  112. 0xc0 GPL,SL VS 1 Device vendor specific log
  113. 0xc1 GPL VS 93 Device vendor specific log
  114. 0xe0 GPL,SL R/W 1 SCT Command/Status
  115. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  116.  
  117. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  118. No Errors Logged
  119.  
  120. SMART Extended Self-test Log Version: 1 (1 sectors)
  121. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  122. # 1 Extended offline Completed without error 00% 7096 -
  123. # 2 Short offline Completed without error 00% 7085 -
  124.  
  125. SMART Selective self-test log data structure revision number 1
  126. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  127. 1 0 0 Not_testing
  128. 2 0 0 Not_testing
  129. 3 0 0 Not_testing
  130. 4 0 0 Not_testing
  131. 5 0 0 Not_testing
  132. Selective self-test flags (0x0):
  133. After scanning selected spans, do NOT read-scan remainder of disk.
  134. If Selective self-test is pending on power-up, resume after 0 minute delay.
  135.  
  136. SCT Status Version: 3
  137. SCT Version (vendor specific): 258 (0x0102)
  138. SCT Support Level: 1
  139. Device State: Active (0)
  140. Current Temperature: 33 Celsius
  141. Power Cycle Min/Max Temperature: 30/33 Celsius
  142. Lifetime Min/Max Temperature: 2/44 Celsius
  143. Under/Over Temperature Limit Count: 0/0
  144. Vendor specific:
  145. 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  146. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  147.  
  148. SCT Temperature History Version: 2
  149. Temperature Sampling Period: 1 minute
  150. Temperature Logging Interval: 1 minute
  151. Min/Max recommended Temperature: 0/60 Celsius
  152. Min/Max Temperature Limit: -41/85 Celsius
  153. Temperature History Size (Index): 478 (24)
  154.  
  155. Index Estimated Time Temperature Celsius
  156. 25 2018-11-18 04:09 28 *********
  157. ... ..( 4 skipped). .. *********
  158. 30 2018-11-18 04:14 28 *********
  159. 31 2018-11-18 04:15 29 **********
  160. ... ..( 22 skipped). .. **********
  161. 54 2018-11-18 04:38 29 **********
  162. 55 2018-11-18 04:39 28 *********
  163. ... ..( 36 skipped). .. *********
  164. 92 2018-11-18 05:16 28 *********
  165. 93 2018-11-18 05:17 29 **********
  166. ... ..( 38 skipped). .. **********
  167. 132 2018-11-18 05:56 29 **********
  168. 133 2018-11-18 05:57 28 *********
  169. ... ..( 79 skipped). .. *********
  170. 213 2018-11-18 07:17 28 *********
  171. 214 2018-11-18 07:18 29 **********
  172. ... ..( 18 skipped). .. **********
  173. 233 2018-11-18 07:37 29 **********
  174. 234 2018-11-18 07:38 28 *********
  175. ... ..( 34 skipped). .. *********
  176. 269 2018-11-18 08:13 28 *********
  177. 270 2018-11-18 08:14 29 **********
  178. ... ..( 13 skipped). .. **********
  179. 284 2018-11-18 08:28 29 **********
  180. 285 2018-11-18 08:29 30 ***********
  181. ... ..( 49 skipped). .. ***********
  182. 335 2018-11-18 09:19 30 ***********
  183. 336 2018-11-18 09:20 31 ************
  184. ... ..( 37 skipped). .. ************
  185. 374 2018-11-18 09:58 31 ************
  186. 375 2018-11-18 09:59 30 ***********
  187. ... ..( 56 skipped). .. ***********
  188. 432 2018-11-18 10:56 30 ***********
  189. 433 2018-11-18 10:57 ? -
  190. 434 2018-11-18 10:58 30 ***********
  191. ... ..( 3 skipped). .. ***********
  192. 438 2018-11-18 11:02 30 ***********
  193. 439 2018-11-18 11:03 31 ************
  194. ... ..( 4 skipped). .. ************
  195. 444 2018-11-18 11:08 31 ************
  196. 445 2018-11-18 11:09 32 *************
  197. ... ..( 8 skipped). .. *************
  198. 454 2018-11-18 11:18 32 *************
  199. 455 2018-11-18 11:19 33 **************
  200. ... ..( 12 skipped). .. **************
  201. 468 2018-11-18 11:32 33 **************
  202. 469 2018-11-18 11:33 29 **********
  203. ... ..( 24 skipped). .. **********
  204. 16 2018-11-18 11:58 29 **********
  205. 17 2018-11-18 11:59 28 *********
  206. ... ..( 6 skipped). .. *********
  207. 24 2018-11-18 12:06 28 *********
  208.  
  209. SCT Error Recovery Control:
  210. Read: 70 (7.0 seconds)
  211. Write: 70 (7.0 seconds)
  212.  
  213. Device Statistics (GP/SMART Log 0x04) not supported
  214.  
  215. Pending Defects log (GP Log 0x0c) not supported
  216.  
  217. SATA Phy Event Counters (GP Log 0x11)
  218. ID Size Value Description
  219. 0x0001 2 0 Command failed due to ICRC error
  220. 0x0002 2 0 R_ERR response for data FIS
  221. 0x0003 2 0 R_ERR response for device-to-host data FIS
  222. 0x0004 2 0 R_ERR response for host-to-device data FIS
  223. 0x0005 2 0 R_ERR response for non-data FIS
  224. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  225. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  226. 0x0008 2 0 Device-to-host non-data FIS retries
  227. 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
  228. 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
  229. 0x000b 2 0 CRC errors within host-to-device FIS
  230. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  231. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  232. 0x8000 4 2142 Vendor specific
  233.  
  234. % sudo smartctl -x /dev/ada1
  235. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
  236. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  237.  
  238. === START OF INFORMATION SECTION ===
  239. Model Family: Western Digital Red
  240. Device Model: WDC WD30EFRX-68EUZN0
  241. Serial Number: WD-WCC4N2ZHL9PE
  242. LU WWN Device Id: 5 0014ee 25ffd22c4
  243. Firmware Version: 82.00A82
  244. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  245. Sector Sizes: 512 bytes logical, 4096 bytes physical
  246. Rotation Rate: 5400 rpm
  247. Device is: In smartctl database [for details use: -P show]
  248. ATA Version is: ACS-2 (minor revision not indicated)
  249. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  250. Local Time is: Sun Nov 18 12:06:20 2018 PST
  251. SMART support is: Available - device has SMART capability.
  252. SMART support is: Enabled
  253. AAM feature is: Unavailable
  254. APM feature is: Unavailable
  255. Rd look-ahead is: Enabled
  256. Write cache is: Enabled
  257. DSN feature is: Unavailable
  258. ATA Security is: Disabled, NOT FROZEN [SEC1]
  259. Wt Cache Reorder: Enabled
  260.  
  261. === START OF READ SMART DATA SECTION ===
  262. SMART overall-health self-assessment test result: PASSED
  263.  
  264. General SMART Values:
  265. Offline data collection status: (0x00) Offline data collection activity
  266. was never started.
  267. Auto Offline Data Collection: Disabled.
  268. Self-test execution status: ( 0) The previous self-test routine completed
  269. without error or no self-test has ever
  270. been run.
  271. Total time to complete Offline
  272. data collection: (41160) seconds.
  273. Offline data collection
  274. capabilities: (0x7b) SMART execute Offline immediate.
  275. Auto Offline data collection on/off support.
  276. Suspend Offline collection upon new
  277. command.
  278. Offline surface scan supported.
  279. Self-test supported.
  280. Conveyance Self-test supported.
  281. Selective Self-test supported.
  282. SMART capabilities: (0x0003) Saves SMART data before entering
  283. power-saving mode.
  284. Supports SMART auto save timer.
  285. Error logging capability: (0x01) Error logging supported.
  286. General Purpose Logging supported.
  287. Short self-test routine
  288. recommended polling time: ( 2) minutes.
  289. Extended self-test routine
  290. recommended polling time: ( 413) minutes.
  291. Conveyance self-test routine
  292. recommended polling time: ( 5) minutes.
  293. SCT capabilities: (0x703d) SCT Status supported.
  294. SCT Error Recovery Control supported.
  295. SCT Feature Control supported.
  296. SCT Data Table supported.
  297.  
  298. SMART Attributes Data Structure revision number: 16
  299. Vendor Specific SMART Attributes with Thresholds:
  300. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  301. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  302. 3 Spin_Up_Time POS--K 213 176 021 - 4341
  303. 4 Start_Stop_Count -O--CK 100 100 000 - 82
  304. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  305. 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
  306. 9 Power_On_Hours -O--CK 056 056 000 - 32696
  307. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  308. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  309. 12 Power_Cycle_Count -O--CK 100 100 000 - 80
  310. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 71
  311. 193 Load_Cycle_Count -O--CK 200 200 000 - 1165
  312. 194 Temperature_Celsius -O---K 118 108 000 - 32
  313. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  314. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  315. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  316. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  317. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  318. ||||||_ K auto-keep
  319. |||||__ C event count
  320. ||||___ R error rate
  321. |||____ S speed/performance
  322. ||_____ O updated online
  323. |______ P prefailure warning
  324.  
  325. General Purpose Log Directory Version 1
  326. SMART Log Directory Version 1 [multi-sector log support]
  327. Address Access R/W Size Description
  328. 0x00 GPL,SL R/O 1 Log Directory
  329. 0x01 SL R/O 1 Summary SMART error log
  330. 0x02 SL R/O 5 Comprehensive SMART error log
  331. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  332. 0x06 SL R/O 1 SMART self-test log
  333. 0x07 GPL R/O 1 Extended self-test log
  334. 0x09 SL R/W 1 Selective self-test log
  335. 0x10 GPL R/O 1 NCQ Command Error log
  336. 0x11 GPL R/O 1 SATA Phy Event Counters log
  337. 0x21 GPL R/O 1 Write stream error log
  338. 0x22 GPL R/O 1 Read stream error log
  339. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  340. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  341. 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
  342. 0xbd GPL,SL VS 1 Device vendor specific log
  343. 0xc0 GPL,SL VS 1 Device vendor specific log
  344. 0xc1 GPL VS 93 Device vendor specific log
  345. 0xe0 GPL,SL R/W 1 SCT Command/Status
  346. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  347.  
  348. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  349. No Errors Logged
  350.  
  351. SMART Extended Self-test Log Version: 1 (1 sectors)
  352. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  353. # 1 Extended offline Completed without error 00% 8237 -
  354. # 2 Short offline Completed without error 00% 8229 -
  355.  
  356. SMART Selective self-test log data structure revision number 1
  357. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  358. 1 0 0 Not_testing
  359. 2 0 0 Not_testing
  360. 3 0 0 Not_testing
  361. 4 0 0 Not_testing
  362. 5 0 0 Not_testing
  363. Selective self-test flags (0x0):
  364. After scanning selected spans, do NOT read-scan remainder of disk.
  365. If Selective self-test is pending on power-up, resume after 0 minute delay.
  366.  
  367. ^[[ASCT Status Version: 3
  368. SCT Version (vendor specific): 258 (0x0102)
  369. SCT Support Level: 1
  370. Device State: Active (0)
  371. Current Temperature: 32 Celsius
  372. Power Cycle Min/Max Temperature: 29/32 Celsius
  373. Lifetime Min/Max Temperature: 2/42 Celsius
  374. Under/Over Temperature Limit Count: 0/0
  375. Vendor specific:
  376. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  377. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  378.  
  379. SCT Temperature History Version: 2
  380. Temperature Sampling Period: 1 minute
  381. Temperature Logging Interval: 1 minute
  382. Min/Max recommended Temperature: 0/60 Celsius
  383. Min/Max Temperature Limit: -41/85 Celsius
  384. Temperature History Size (Index): 478 (78)
  385.  
  386. Index Estimated Time Temperature Celsius
  387. 79 2018-11-18 04:09 31 ************
  388. ... ..( 5 skipped). .. ************
  389. 85 2018-11-18 04:15 31 ************
  390. 86 2018-11-18 04:16 32 *************
  391. ... ..( 7 skipped). .. *************
  392. 94 2018-11-18 04:24 32 *************
  393. 95 2018-11-18 04:25 28 *********
  394. ... ..(191 skipped). .. *********
  395. 287 2018-11-18 07:37 28 *********
  396. 288 2018-11-18 07:38 27 ********
  397. ... ..(126 skipped). .. ********
  398. 415 2018-11-18 09:45 27 ********
  399. 416 2018-11-18 09:46 28 *********
  400. ... ..(118 skipped). .. *********
  401. 57 2018-11-18 11:45 28 *********
  402. 58 2018-11-18 11:46 ? -
  403. 59 2018-11-18 11:47 29 **********
  404. ... ..( 5 skipped). .. **********
  405. 65 2018-11-18 11:53 29 **********
  406. 66 2018-11-18 11:54 30 ***********
  407. ... ..( 3 skipped). .. ***********
  408. 70 2018-11-18 11:58 30 ***********
  409. 71 2018-11-18 11:59 31 ************
  410. ... ..( 6 skipped). .. ************
  411. 78 2018-11-18 12:06 31 ************
  412.  
  413. SCT Error Recovery Control:
  414. Read: 70 (7.0 seconds)
  415. Write: 70 (7.0 seconds)
  416.  
  417. Device Statistics (GP/SMART Log 0x04) not supported
  418.  
  419. Pending Defects log (GP Log 0x0c) not supported
  420.  
  421. SATA Phy Event Counters (GP Log 0x11)
  422. ID Size Value Description
  423. 0x0001 2 0 Command failed due to ICRC error
  424. 0x0002 2 0 R_ERR response for data FIS
  425. 0x0003 2 0 R_ERR response for device-to-host data FIS
  426. 0x0004 2 0 R_ERR response for host-to-device data FIS
  427. 0x0005 2 0 R_ERR response for non-data FIS
  428. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  429. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  430. 0x0008 2 0 Device-to-host non-data FIS retries
  431. 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
  432. 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
  433. 0x000b 2 0 CRC errors within host-to-device FIS
  434. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  435. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  436. 0x8000 4 2150 Vendor specific
  437.  
  438. % sudo smartctl -x /dev/ada2
  439. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
  440. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  441.  
  442. === START OF INFORMATION SECTION ===
  443. Model Family: Western Digital Red
  444. Device Model: WDC WD50EFRX-68MYMN1
  445. Serial Number: WD-WXL1H6450D9F
  446. LU WWN Device Id: 5 0014ee 2b5f32d45
  447. Firmware Version: 82.00A82
  448. User Capacity: 5,000,981,078,016 bytes [5.00 TB]
  449. Sector Sizes: 512 bytes logical, 4096 bytes physical
  450. Rotation Rate: 5700 rpm
  451. Device is: In smartctl database [for details use: -P show]
  452. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  453. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  454. Local Time is: Sun Nov 18 12:06:24 2018 PST
  455. SMART support is: Available - device has SMART capability.
  456. SMART support is: Enabled
  457. AAM feature is: Unavailable
  458. APM feature is: Unavailable
  459. Rd look-ahead is: Enabled
  460. Write cache is: Enabled
  461. DSN feature is: Unavailable
  462. ATA Security is: Disabled, NOT FROZEN [SEC1]
  463.  
  464. Read SCT Status failed: Input/output error
  465. Wt Cache Reorder: Unknown (SCT Feature Control command failed)
  466.  
  467. === START OF READ SMART DATA SECTION ===
  468. SMART overall-health self-assessment test result: PASSED
  469.  
  470. General SMART Values:
  471. Offline data collection status: (0x00) Offline data collection activity
  472. was never started.
  473. Auto Offline Data Collection: Disabled.
  474. Self-test execution status: ( 0) The previous self-test routine completed
  475. without error or no self-test has ever
  476. been run.
  477. Total time to complete Offline
  478. data collection: (56520) seconds.
  479. Offline data collection
  480. capabilities: (0x7b) SMART execute Offline immediate.
  481. Auto Offline data collection on/off support.
  482. Suspend Offline collection upon new
  483. command.
  484. Offline surface scan supported.
  485. Self-test supported.
  486. Conveyance Self-test supported.
  487. Selective Self-test supported.
  488. SMART capabilities: (0x0003) Saves SMART data before entering
  489. power-saving mode.
  490. Supports SMART auto save timer.
  491. Error logging capability: (0x01) Error logging supported.
  492. General Purpose Logging supported.
  493. Short self-test routine
  494. recommended polling time: ( 2) minutes.
  495. Extended self-test routine
  496. recommended polling time: ( 565) minutes.
  497. Conveyance self-test routine
  498. recommended polling time: ( 5) minutes.
  499. SCT capabilities: (0x303d) SCT Status supported.
  500. SCT Error Recovery Control supported.
  501. SCT Feature Control supported.
  502. SCT Data Table supported.
  503.  
  504. SMART Attributes Data Structure revision number: 16
  505. Vendor Specific SMART Attributes with Thresholds:
  506. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  507. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  508. 3 Spin_Up_Time POS--K 213 204 021 - 8325
  509. 4 Start_Stop_Count -O--CK 100 100 000 - 52
  510. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  511. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  512. 9 Power_On_Hours -O--CK 057 057 000 - 31553
  513. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  514. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  515. 12 Power_Cycle_Count -O--CK 100 100 000 - 52
  516. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 45
  517. 193 Load_Cycle_Count -O--CK 200 200 000 - 1025
  518. 194 Temperature_Celsius -O---K 120 110 000 - 32
  519. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  520. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  521. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  522. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  523. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  524. ||||||_ K auto-keep
  525. |||||__ C event count
  526. ||||___ R error rate
  527. |||____ S speed/performance
  528. ||_____ O updated online
  529. |______ P prefailure warning
  530.  
  531. General Purpose Log Directory Version 1
  532. SMART Log Directory Version 1 [multi-sector log support]
  533. Address Access R/W Size Description
  534. 0x00 GPL,SL R/O 1 Log Directory
  535. 0x01 SL R/O 1 Summary SMART error log
  536. 0x02 SL R/O 5 Comprehensive SMART error log
  537. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  538. 0x06 SL R/O 1 SMART self-test log
  539. 0x07 GPL R/O 1 Extended self-test log
  540. 0x09 SL R/W 1 Selective self-test log
  541. 0x10 GPL R/O 1 NCQ Command Error log
  542. 0x11 GPL R/O 1 SATA Phy Event Counters log
  543. 0x21 GPL R/O 1 Write stream error log
  544. 0x22 GPL R/O 1 Read stream error log
  545. 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
  546. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  547. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  548. 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
  549. 0xb7 GPL,SL VS 40 Device vendor specific log
  550. 0xbd GPL,SL VS 1 Device vendor specific log
  551. 0xc0 GPL,SL VS 1 Device vendor specific log
  552. 0xc1 GPL VS 93 Device vendor specific log
  553. 0xe0 GPL,SL R/W 1 SCT Command/Status
  554. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  555.  
  556. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  557. Device Error Count: 9
  558. CR = Command Register
  559. FEATR = Features Register
  560. COUNT = Count (was: Sector Count) Register
  561. LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
  562. LH = LBA High (was: Cylinder High) Register ] LBA
  563. LM = LBA Mid (was: Cylinder Low) Register ] Register
  564. LL = LBA Low (was: Sector Number) Register ]
  565. DV = Device (was: Device/Head) Register
  566. DC = Device Control Register
  567. ER = Error register
  568. ST = Status register
  569. Powered_Up_Time is measured from power on, and printed as
  570. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  571. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  572.  
  573. Error 9 [8] occurred at disk power-on lifetime: 30312 hours (1263 days + 0 hours)
  574. When the command that caused the error occurred, the device was active or idle.
  575.  
  576. After command completion occurred, registers were:
  577. ER -- ST COUNT LBA_48 LH LM LL DV DC
  578. -- -- -- == -- == == == -- -- -- -- --
  579. 10 -- 51 00 00 00 00 bd 78 18 90 40 00 Error: IDNF at LBA = 0xbd781890 = 3178764432
  580.  
  581. Commands leading to the command that caused the error were:
  582. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  583. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  584. 61 00 08 00 d0 00 00 bd 78 18 90 40 08 2d+16:11:27.382 WRITE FPDMA QUEUED
  585. ea 00 00 00 00 00 00 00 00 00 00 40 08 2d+16:11:22.435 FLUSH CACHE EXT
  586. 61 00 08 00 c0 00 02 46 30 d7 d0 40 08 2d+16:11:22.435 WRITE FPDMA QUEUED
  587. 61 00 08 00 b8 00 02 46 30 d5 d0 40 08 2d+16:11:22.435 WRITE FPDMA QUEUED
  588. 61 00 08 00 b0 00 00 00 40 03 d0 40 08 2d+16:11:22.435 WRITE FPDMA QUEUED
  589.  
  590. Error 8 [7] occurred at disk power-on lifetime: 27219 hours (1134 days + 3 hours)
  591. When the command that caused the error occurred, the device was active or idle.
  592.  
  593. After command completion occurred, registers were:
  594. ER -- ST COUNT LBA_48 LH LM LL DV DC
  595. -- -- -- == -- == == == -- -- -- -- --
  596. 40 -- 51 00 00 00 00 81 ea 4d a8 40 00 Error: UNC at LBA = 0x81ea4da8 = 2179616168
  597.  
  598. Commands leading to the command that caused the error were:
  599. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  600. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  601. 60 01 00 00 d0 00 00 81 ea 4d a8 40 08 13d+16:54:16.655 READ FPDMA QUEUED
  602. 60 01 00 00 c8 00 00 81 ea 4c a8 40 08 13d+16:54:16.654 READ FPDMA QUEUED
  603. 60 01 00 00 c0 00 00 81 ea 4b a8 40 08 13d+16:54:16.653 READ FPDMA QUEUED
  604. 60 01 00 00 b8 00 00 81 ea 49 a8 40 08 13d+16:54:16.652 READ FPDMA QUEUED
  605. 60 01 00 00 b0 00 00 81 ea 4a a8 40 08 13d+16:54:16.652 READ FPDMA QUEUED
  606.  
  607. Error 7 [6] occurred at disk power-on lifetime: 24849 hours (1035 days + 9 hours)
  608. When the command that caused the error occurred, the device was active or idle.
  609.  
  610. After command completion occurred, registers were:
  611. ER -- ST COUNT LBA_48 LH LM LL DV DC
  612. -- -- -- == -- == == == -- -- -- -- --
  613. 10 -- 51 00 00 00 00 00 40 01 e0 40 00 Error: IDNF at LBA = 0x004001e0 = 4194784
  614.  
  615. Commands leading to the command that caused the error were:
  616. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  617. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  618. 61 00 08 00 10 00 00 00 40 01 e0 40 08 26d+17:37:32.998 WRITE FPDMA QUEUED
  619. ea 00 00 00 00 00 00 00 00 00 00 40 08 26d+17:37:32.948 FLUSH CACHE EXT
  620. 61 00 10 00 00 00 00 da 87 ec 60 40 08 26d+17:37:32.948 WRITE FPDMA QUEUED
  621. 61 00 08 00 f8 00 00 da 87 ec 48 40 08 26d+17:37:32.948 WRITE FPDMA QUEUED
  622. 61 00 20 00 f0 00 00 d8 f3 fd 50 40 08 26d+17:37:32.948 WRITE FPDMA QUEUED
  623.  
  624. Error 6 [5] occurred at disk power-on lifetime: 21801 hours (908 days + 9 hours)
  625. When the command that caused the error occurred, the device was active or idle.
  626.  
  627. After command completion occurred, registers were:
  628. ER -- ST COUNT LBA_48 LH LM LL DV DC
  629. -- -- -- == -- == == == -- -- -- -- --
  630. 10 -- 51 00 00 00 00 79 39 68 18 40 00 Error: IDNF at LBA = 0x79396818 = 2033805336
  631.  
  632. Commands leading to the command that caused the error were:
  633. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  634. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  635. 61 00 08 00 e8 00 00 79 39 68 18 40 08 26d+12:10:07.977 WRITE FPDMA QUEUED
  636. ea 00 00 00 00 00 00 00 00 00 00 40 08 26d+12:10:02.999 FLUSH CACHE EXT
  637. 61 00 08 00 d8 00 02 46 30 d7 80 40 08 26d+12:10:02.999 WRITE FPDMA QUEUED
  638. 61 00 08 00 d0 00 02 46 30 d5 80 40 08 26d+12:10:02.999 WRITE FPDMA QUEUED
  639. 61 00 08 00 c8 00 00 00 40 03 80 40 08 26d+12:10:02.998 WRITE FPDMA QUEUED
  640.  
  641. Error 5 [4] occurred at disk power-on lifetime: 19108 hours (796 days + 4 hours)
  642. When the command that caused the error occurred, the device was active or idle.
  643.  
  644. After command completion occurred, registers were:
  645. ER -- ST COUNT LBA_48 LH LM LL DV DC
  646. -- -- -- == -- == == == -- -- -- -- --
  647. 40 -- 51 00 00 00 00 c5 b9 58 30 40 00 Error: UNC at LBA = 0xc5b95830 = 3317258288
  648.  
  649. Commands leading to the command that caused the error were:
  650. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  651. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  652. 60 00 08 00 08 00 00 c5 b9 58 30 40 08 39d+13:36:36.139 READ FPDMA QUEUED
  653. ea 00 00 00 00 00 00 00 00 00 00 40 08 39d+13:36:36.134 FLUSH CACHE EXT
  654. 61 00 08 00 f8 00 00 c6 02 53 a8 40 08 39d+13:36:36.134 WRITE FPDMA QUEUED
  655. ea 00 00 00 00 00 00 00 00 00 00 40 08 39d+13:36:36.120 FLUSH CACHE EXT
  656. 61 00 08 00 e8 00 00 c6 02 53 70 40 08 39d+13:36:36.120 WRITE FPDMA QUEUED
  657.  
  658. Error 4 [3] occurred at disk power-on lifetime: 16689 hours (695 days + 9 hours)
  659. When the command that caused the error occurred, the device was active or idle.
  660.  
  661. After command completion occurred, registers were:
  662. ER -- ST COUNT LBA_48 LH LM LL DV DC
  663. -- -- -- == -- == == == -- -- -- -- --
  664. 10 -- 51 00 00 00 00 81 17 72 c0 40 00 Error: IDNF at LBA = 0x811772c0 = 2165797568
  665.  
  666. Commands leading to the command that caused the error were:
  667. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  668. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  669. 61 00 08 00 98 00 00 81 17 72 c0 40 08 1d+19:03:02.435 WRITE FPDMA QUEUED
  670. ea 00 00 00 00 00 00 00 00 00 00 40 08 1d+19:02:57.448 FLUSH CACHE EXT
  671. 61 00 08 00 88 00 02 46 30 d7 b8 40 08 1d+19:02:57.448 WRITE FPDMA QUEUED
  672. 61 00 08 00 80 00 02 46 30 d5 b8 40 08 1d+19:02:57.448 WRITE FPDMA QUEUED
  673. 61 00 08 00 78 00 00 00 40 03 b8 40 08 1d+19:02:57.448 WRITE FPDMA QUEUED
  674.  
  675. Error 3 [2] occurred at disk power-on lifetime: 16006 hours (666 days + 22 hours)
  676. When the command that caused the error occurred, the device was active or idle.
  677.  
  678. After command completion occurred, registers were:
  679. ER -- ST COUNT LBA_48 LH LM LL DV DC
  680. -- -- -- == -- == == == -- -- -- -- --
  681. 10 -- 51 00 00 00 00 b3 88 f4 58 40 00 Error: IDNF at LBA = 0xb388f458 = 3012097112
  682.  
  683. Commands leading to the command that caused the error were:
  684. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  685. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  686. 61 00 08 00 08 00 00 b3 88 f4 58 40 08 11d+23:25:55.573 WRITE FPDMA QUEUED
  687. 61 00 08 00 00 00 00 b3 88 f4 30 40 08 11d+23:25:55.572 WRITE FPDMA QUEUED
  688. 61 00 08 00 f8 00 00 b3 88 f4 20 40 08 11d+23:25:55.572 WRITE FPDMA QUEUED
  689. 61 00 28 00 f0 00 00 42 86 cf 70 40 08 11d+23:25:55.572 WRITE FPDMA QUEUED
  690. 61 00 10 00 e8 00 00 b3 88 f4 38 40 08 11d+23:25:55.572 WRITE FPDMA QUEUED
  691.  
  692. Error 2 [1] occurred at disk power-on lifetime: 15177 hours (632 days + 9 hours)
  693. When the command that caused the error occurred, the device was active or idle.
  694.  
  695. After command completion occurred, registers were:
  696. ER -- ST COUNT LBA_48 LH LM LL DV DC
  697. -- -- -- == -- == == == -- -- -- -- --
  698. 10 -- 51 00 00 00 00 a0 7b 69 90 40 00 Error: IDNF at LBA = 0xa07b6990 = 2692442512
  699.  
  700. Commands leading to the command that caused the error were:
  701. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  702. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  703. 61 00 08 00 70 00 00 a0 7b 69 90 40 08 30d+08:14:29.629 WRITE FPDMA QUEUED
  704. ea 00 00 00 00 00 00 00 00 00 00 40 08 30d+08:14:29.540 FLUSH CACHE EXT
  705. 61 00 18 00 60 00 00 a0 7b 69 48 40 08 30d+08:14:29.540 WRITE FPDMA QUEUED
  706. ea 00 00 00 00 00 00 00 00 00 00 40 08 30d+08:14:29.529 FLUSH CACHE EXT
  707. 61 00 20 00 50 00 00 a0 7b 69 00 40 08 30d+08:14:29.529 WRITE FPDMA QUEUED
  708.  
  709. SMART Extended Self-test Log Version: 1 (1 sectors)
  710. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  711. # 1 Extended offline Completed without error 00% 7096 -
  712. # 2 Short offline Completed without error 00% 7085 -
  713.  
  714. SMART Selective self-test log data structure revision number 1
  715. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  716. 1 0 0 Not_testing
  717. 2 0 0 Not_testing
  718. 3 0 0 Not_testing
  719. 4 0 0 Not_testing
  720. 5 0 0 Not_testing
  721. Selective self-test flags (0x0):
  722. After scanning selected spans, do NOT read-scan remainder of disk.
  723. If Selective self-test is pending on power-up, resume after 0 minute delay.
  724.  
  725. SCT Status Version: 3
  726. SCT Version (vendor specific): 258 (0x0102)
  727. SCT Support Level: 1
  728. Device State: Active (0)
  729. Current Temperature: 32 Celsius
  730. Power Cycle Min/Max Temperature: 30/32 Celsius
  731. Lifetime Min/Max Temperature: 2/42 Celsius
  732. Under/Over Temperature Limit Count: 0/0
  733. Vendor specific:
  734. 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  735. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  736.  
  737. SCT Temperature History Version: 2
  738. Temperature Sampling Period: 1 minute
  739. Temperature Logging Interval: 1 minute
  740. Min/Max recommended Temperature: 0/60 Celsius
  741. Min/Max Temperature Limit: -41/85 Celsius
  742. Temperature History Size (Index): 478 (290)
  743.  
  744. Index Estimated Time Temperature Celsius
  745. 291 2018-11-18 04:10 27 ********
  746. ... ..( 71 skipped). .. ********
  747. 363 2018-11-18 05:22 27 ********
  748. 364 2018-11-18 05:23 28 *********
  749. ... ..( 37 skipped). .. *********
  750. 402 2018-11-18 06:01 28 *********
  751. 403 2018-11-18 06:02 27 ********
  752. ... ..( 24 skipped). .. ********
  753. 428 2018-11-18 06:27 27 ********
  754. 429 2018-11-18 06:28 28 *********
  755. ... ..( 66 skipped). .. *********
  756. 18 2018-11-18 07:35 28 *********
  757. 19 2018-11-18 07:36 29 **********
  758. ... ..( 7 skipped). .. **********
  759. 27 2018-11-18 07:44 29 **********
  760. 28 2018-11-18 07:45 28 *********
  761. ... ..( 17 skipped). .. *********
  762. 46 2018-11-18 08:03 28 *********
  763. 47 2018-11-18 08:04 27 ********
  764. ... ..( 10 skipped). .. ********
  765. 58 2018-11-18 08:15 27 ********
  766. 59 2018-11-18 08:16 28 *********
  767. ... ..( 61 skipped). .. *********
  768. 121 2018-11-18 09:18 28 *********
  769. 122 2018-11-18 09:19 29 **********
  770. ... ..( 21 skipped). .. **********
  771. 144 2018-11-18 09:41 29 **********
  772. 145 2018-11-18 09:42 30 ***********
  773. ... ..( 72 skipped). .. ***********
  774. 218 2018-11-18 10:55 30 ***********
  775. 219 2018-11-18 10:56 ? -
  776. 220 2018-11-18 10:57 31 ************
  777. 221 2018-11-18 10:58 30 ***********
  778. ... ..( 3 skipped). .. ***********
  779. 225 2018-11-18 11:02 30 ***********
  780. 226 2018-11-18 11:03 31 ************
  781. ... ..( 13 skipped). .. ************
  782. 240 2018-11-18 11:17 31 ************
  783. 241 2018-11-18 11:18 32 *************
  784. ... ..( 14 skipped). .. *************
  785. 256 2018-11-18 11:33 32 *************
  786. 257 2018-11-18 11:34 28 *********
  787. ... ..( 2 skipped). .. *********
  788. 260 2018-11-18 11:37 28 *********
  789. 261 2018-11-18 11:38 29 **********
  790. 262 2018-11-18 11:39 29 **********
  791. 263 2018-11-18 11:40 29 **********
  792. 264 2018-11-18 11:41 28 *********
  793. ... ..( 15 skipped). .. *********
  794. 280 2018-11-18 11:57 28 *********
  795. 281 2018-11-18 11:58 27 ********
  796. ... ..( 8 skipped). .. ********
  797. 290 2018-11-18 12:07 27 ********
  798.  
  799. Read SCT Status failed: Input/output error
  800. SCT (Get) Error Recovery Control command failed
  801.  
  802. Device Statistics (GP/SMART Log 0x04) not supported
  803.  
  804. Pending Defects log (GP Log 0x0c) not supported
  805.  
  806. SATA Phy Event Counters (GP Log 0x11)
  807. ID Size Value Description
  808. 0x0001 2 0 Command failed due to ICRC error
  809. 0x0002 2 0 R_ERR response for data FIS
  810. 0x0003 2 0 R_ERR response for device-to-host data FIS
  811. 0x0004 2 0 R_ERR response for host-to-device data FIS
  812. 0x0005 2 0 R_ERR response for non-data FIS
  813. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  814. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  815. 0x0008 2 0 Device-to-host non-data FIS retries
  816. 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
  817. 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
  818. 0x000b 2 0 CRC errors within host-to-device FIS
  819. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  820. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  821. 0x8000 4 2272 Vendor specific
  822.  
  823.  
  824.  
  825.  
  826.  
  827.  
  828.  
  829. % sudo smartctl -x /dev/ada3
  830. Password:
  831. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
  832. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  833.  
  834. === START OF INFORMATION SECTION ===
  835. Model Family: Western Digital Red
  836. Device Model: WDC WD30EFRX-68EUZN0
  837. Serial Number: WD-WCC4N2ZHLE5X
  838. LU WWN Device Id: 5 0014ee 20aa7dad3
  839. Firmware Version: 82.00A82
  840. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  841. Sector Sizes: 512 bytes logical, 4096 bytes physical
  842. Rotation Rate: 5400 rpm
  843. Device is: In smartctl database [for details use: -P show]
  844. ATA Version is: ACS-2 (minor revision not indicated)
  845. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  846. Local Time is: Sun Nov 18 12:44:30 2018 PST
  847. SMART support is: Available - device has SMART capability.
  848. SMART support is: Enabled
  849. AAM feature is: Unavailable
  850. APM feature is: Unavailable
  851. Rd look-ahead is: Enabled
  852. Write cache is: Enabled
  853. DSN feature is: Unavailable
  854. ATA Security is: Disabled, NOT FROZEN [SEC1]
  855. Wt Cache Reorder: Enabled
  856.  
  857. === START OF READ SMART DATA SECTION ===
  858. SMART overall-health self-assessment test result: PASSED
  859.  
  860. General SMART Values:
  861. Offline data collection status: (0x00) Offline data collection activity
  862. was never started.
  863. Auto Offline Data Collection: Disabled.
  864. Self-test execution status: ( 0) The previous self-test routine completed
  865. without error or no self-test has ever
  866. been run.
  867. Total time to complete Offline
  868. data collection: (41760) seconds.
  869. Offline data collection
  870. capabilities: (0x7b) SMART execute Offline immediate.
  871. Auto Offline data collection on/off support.
  872. Suspend Offline collection upon new
  873. command.
  874. Offline surface scan supported.
  875. Self-test supported.
  876. Conveyance Self-test supported.
  877. Selective Self-test supported.
  878. SMART capabilities: (0x0003) Saves SMART data before entering
  879. power-saving mode.
  880. Supports SMART auto save timer.
  881. Error logging capability: (0x01) Error logging supported.
  882. General Purpose Logging supported.
  883. Short self-test routine
  884. recommended polling time: ( 2) minutes.
  885. Extended self-test routine
  886. recommended polling time: ( 418) minutes.
  887. Conveyance self-test routine
  888. recommended polling time: ( 5) minutes.
  889. SCT capabilities: (0x703d) SCT Status supported.
  890. SCT Error Recovery Control supported.
  891. SCT Feature Control supported.
  892. SCT Data Table supported.
  893.  
  894. SMART Attributes Data Structure revision number: 16
  895. Vendor Specific SMART Attributes with Thresholds:
  896. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  897. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  898. 3 Spin_Up_Time POS--K 215 179 021 - 4216
  899. 4 Start_Stop_Count -O--CK 100 100 000 - 82
  900. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  901. 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
  902. 9 Power_On_Hours -O--CK 056 056 000 - 32696
  903. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  904. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  905. 12 Power_Cycle_Count -O--CK 100 100 000 - 80
  906. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 71
  907. 193 Load_Cycle_Count -O--CK 200 200 000 - 1176
  908. 194 Temperature_Celsius -O---K 117 108 000 - 33
  909. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  910. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  911. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  912. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  913. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  914. ||||||_ K auto-keep
  915. |||||__ C event count
  916. ||||___ R error rate
  917. |||____ S speed/performance
  918. ||_____ O updated online
  919. |______ P prefailure warning
  920.  
  921. General Purpose Log Directory Version 1
  922. SMART Log Directory Version 1 [multi-sector log support]
  923. Address Access R/W Size Description
  924. 0x00 GPL,SL R/O 1 Log Directory
  925. 0x01 SL R/O 1 Summary SMART error log
  926. 0x02 SL R/O 5 Comprehensive SMART error log
  927. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  928. 0x06 SL R/O 1 SMART self-test log
  929. 0x07 GPL R/O 1 Extended self-test log
  930. 0x09 SL R/W 1 Selective self-test log
  931. 0x10 GPL R/O 1 NCQ Command Error log
  932. 0x11 GPL R/O 1 SATA Phy Event Counters log
  933. 0x21 GPL R/O 1 Write stream error log
  934. 0x22 GPL R/O 1 Read stream error log
  935. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  936. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  937. 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
  938. 0xbd GPL,SL VS 1 Device vendor specific log
  939. 0xc0 GPL,SL VS 1 Device vendor specific log
  940. 0xc1 GPL VS 93 Device vendor specific log
  941. 0xe0 GPL,SL R/W 1 SCT Command/Status
  942. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  943.  
  944. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  945. No Errors Logged
  946.  
  947. SMART Extended Self-test Log Version: 1 (1 sectors)
  948. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  949. # 1 Extended offline Completed without error 00% 8237 -
  950. # 2 Short offline Completed without error 00% 8229 -
  951.  
  952. SMART Selective self-test log data structure revision number 1
  953. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  954. 1 0 0 Not_testing
  955. 2 0 0 Not_testing
  956. 3 0 0 Not_testing
  957. 4 0 0 Not_testing
  958. 5 0 0 Not_testing
  959. Selective self-test flags (0x0):
  960. After scanning selected spans, do NOT read-scan remainder of disk.
  961. If Selective self-test is pending on power-up, resume after 0 minute delay.
  962.  
  963. SCT Status Version: 3
  964. SCT Version (vendor specific): 258 (0x0102)
  965. SCT Support Level: 1
  966. Device State: Active (0)
  967. Current Temperature: 33 Celsius
  968. Power Cycle Min/Max Temperature: 29/33 Celsius
  969. Lifetime Min/Max Temperature: 2/42 Celsius
  970. Under/Over Temperature Limit Count: 0/0
  971. Vendor specific:
  972. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  973. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  974.  
  975. SCT Temperature History Version: 2
  976. Temperature Sampling Period: 1 minute
  977. Temperature Logging Interval: 1 minute
  978. Min/Max recommended Temperature: 0/60 Celsius
  979. Min/Max Temperature Limit: -41/85 Celsius
  980. Temperature History Size (Index): 478 (101)
  981.  
  982. Index Estimated Time Temperature Celsius
  983. 102 2018-11-18 04:47 33 **************
  984. ... ..( 14 skipped). .. **************
  985. 117 2018-11-18 05:02 33 **************
  986. 118 2018-11-18 05:03 28 *********
  987. ... ..( 13 skipped). .. *********
  988. 132 2018-11-18 05:17 28 *********
  989. 133 2018-11-18 05:18 27 ********
  990. ... ..(182 skipped). .. ********
  991. 316 2018-11-18 08:21 27 ********
  992. 317 2018-11-18 08:22 26 *******
  993. ... ..( 22 skipped). .. *******
  994. 340 2018-11-18 08:45 26 *******
  995. 341 2018-11-18 08:46 27 ********
  996. ... ..(118 skipped). .. ********
  997. 460 2018-11-18 10:45 27 ********
  998. 461 2018-11-18 10:46 28 *********
  999. ... ..( 58 skipped). .. *********
  1000. 42 2018-11-18 11:45 28 *********
  1001. 43 2018-11-18 11:46 ? -
  1002. 44 2018-11-18 11:47 29 **********
  1003. ... ..( 9 skipped). .. **********
  1004. 54 2018-11-18 11:57 29 **********
  1005. 55 2018-11-18 11:58 30 ***********
  1006. ... ..( 2 skipped). .. ***********
  1007. 58 2018-11-18 12:01 30 ***********
  1008. 59 2018-11-18 12:02 31 ************
  1009. ... ..( 17 skipped). .. ************
  1010. 77 2018-11-18 12:20 31 ************
  1011. 78 2018-11-18 12:21 32 *************
  1012. ... ..( 15 skipped). .. *************
  1013. 94 2018-11-18 12:37 32 *************
  1014. 95 2018-11-18 12:38 33 **************
  1015. ... ..( 5 skipped). .. **************
  1016. 101 2018-11-18 12:44 33 **************
  1017.  
  1018. SCT Error Recovery Control:
  1019. Read: 70 (7.0 seconds)
  1020. Write: 70 (7.0 seconds)
  1021.  
  1022. Device Statistics (GP/SMART Log 0x04) not supported
  1023.  
  1024. Pending Defects log (GP Log 0x0c) not supported
  1025.  
  1026. SATA Phy Event Counters (GP Log 0x11)
  1027. ID Size Value Description
  1028. 0x0001 2 0 Command failed due to ICRC error
  1029. 0x0002 2 0 R_ERR response for data FIS
  1030. 0x0003 2 0 R_ERR response for device-to-host data FIS
  1031. 0x0004 2 0 R_ERR response for host-to-device data FIS
  1032. 0x0005 2 0 R_ERR response for non-data FIS
  1033. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  1034. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  1035. 0x0008 2 0 Device-to-host non-data FIS retries
  1036. 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
  1037. 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
  1038. 0x000b 2 0 CRC errors within host-to-device FIS
  1039. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  1040. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  1041. 0x8000 4 4436 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!