$ sudo smartctl -x /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-44-iridium] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSCKJW180H6
Serial Number: CVTQ549402FR180A
LU WWN Device Id: 5 5cd2e4 14ca49bae
Firmware Version: RG11
User Capacity: 180,045,766,656 bytes [180 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Mar 17 00:18:27 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Unexpected SCT status 0x0010 (action_code=4, function_code=2)
Wt Cache Reorder: N/A

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4395) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
Conveyance self-test routine
recommended polling time: ( 4) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -CK 100 100 000 - 0
9 Power_On_Hours -CK 100 100 000 - 2408
12 Power_Cycle_Count -CK 100 100 000 - 69
170 Unknown_Attribute PO--CK 098 100 010 - 0
171 Unknown_Attribute -CK 100 100 000 - 0
172 Unknown_Attribute -CK 100 100 000 - 0
174 Unknown_Attribute -CK 100 100 000 - 25
183 Runtime_Bad_Block -CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 090 - 0
187 Reported_Uncorrect -CK 100 100 000 - 0
190 Airflow_Temperature_Cel -CK 030 100 000 - 30 (0 236 0 52 0)
192 Power-Off_Retract_Count -CK 100 100 000 - 25
199 UDMA_CRC_Error_Count -CK 100 100 000 - 0
225 Unknown_SSD_Attribute -CK 100 100 000 - 6251
226 Unknown_SSD_Attribute -CK 100 100 000 - 65535
227 Unknown_SSD_Attribute -CK 100 100 000 - 48
228 Power-off_Retract_Count -CK 100 100 000 - 65535
232 Available_Reservd_Space PO--CK 098 100 010 - 0
233 Media_Wearout_Indicator -CK 098 100 000 - 0
241 Total_LBAs_Written -CK 100 100 000 - 6251
242 Total_LBAs_Read -CK 100 100 000 - 604
249 Unknown_Attribute -CK 100 100 000 - 15329

_ K auto-keep

__ C event count

___ R error rate

____ S speed/performance

_____ O updated online

______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x04 GPL,SL R/O 1 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log not supported

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: -20/52 Celsius
Lifetime Min/Max Temperature: -20/61 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/75 Celsius
Temperature History Size (Index): 478 (69)

Index Estimated Time Temperature Celsius
70 2017-03-13 16:40 ? -
... ..(476 skipped). .. -
69 2017-03-17 00:10 ? -

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 69 Lifetime Power-On Resets
1 0x010 4 2408 Power-on Hours
1 0x018 6 409691080 Logical Sectors Written
1 0x020 6 10541819 Number of Write Commands
1 0x028 6 39615446 Logical Sectors Read
1 0x030 6 1961932 Number of Read Commands
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 30 Current Temperature
5 0x010 1 - Average Short Term Temperature
5 0x018 1 - Average Long Term Temperature
5 0x020 1 - Highest Temperature
5 0x028 1 - Lowest Temperature
5 0x030 1 - Highest Average Short Term Temperature
5 0x038 1 - Lowest Average Short Term Temperature
5 0x040 1 - Highest Average Long Term Temperature
5 0x048 1 - Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 70 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 226 Number of Hardware Resets
6 0x010 4 14 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
7 ===== = = == Solid State Device Statistics (rev 1) ==
7 0x008 1 9 Percentage Used Endurance Indicator

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS

ir@irsled:~$
ir@irsled:~$ ls /ssd
core etcd.startup ir lost+found rsyslog shd.su1.cache tmp
etcd etcd.startup.deprecated log net shd.cache sysstat
ir@irsled:~$

Permalink Edit Delete

akhaAndrew Ha added a comment - 16/Mar/17 5:42 PM

I reboot one more time, and this time it boots up and only detects 32K drive again. I run "ls /ssd" and it works, but shows missing files/directories in the listing. I run smartctl but it fails, I was about to use some options to force it but then the system hangs and reboots..

Ubuntu 14.04.3 LTS irsled ttyS0

irsled login: ir
Password:
Welcome to Iridium
(irsled 3.16.0-44-iridium #59~14.04.1 SMP PREEMPT Wed May 25 00:18:15 UTC 2016)
ir@irsled:~$
ir@irsled:~$
ir@irsled:~$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 32K 0 disk
sdb 8:16 1 7.5G 0 disk
├─sdb1 8:17 1 1.5G 0 part /sysimg
└─sdb2 8:18 1 1.5G 0 part /usbflash
sdc 8:32 1 256K 0 disk
sdd 8:48 1 256K 0 disk
sde 8:64 1 256K 0 disk
sdf 8:80 1 256K 0 disk
loop0 7:0 0 781.7M 1 loop /rofs
ir@irsled:~$

ir@irsled:~$ ls /ssd
core log rsyslog sysstat
ir@irsled:~$

ir@irsled:~$ sudo smartctl -x /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-44-iridium] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: SandForce

{200026BB}

Serial Number: 1
LU WWN Device Id: 5 00232d 000000001
Firmware Version: 306ABBR0
User Capacity: 32,768 bytes [32.7 KB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Mar 17 00:35:52 2017 UTC
SMART support is: Unavailable - device lacks SMART capability.
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Disabled
Write cache is: Disabled
ATA Security is: Unavailable
Wt Cache Reorder: Unavailable

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.