API tools faq
paste
Alarg

export_nvme.txt

Alarg
Oct 10th, 2023
96
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.20 KB | None | 0 0
raw download clone embed print report
  1. NVME Identify Controller:
  2. vid : 0x1c5c
  3. ssvid : 0x1c5c
  4. sn : AD99N802310409U0K
  5. mn : SKHynix_HFS256GD9TNG-L3A0B
  6. fr : 80040C10
  7. rab : 4
  8. ieee : ace42e
  9. cmic : 0
  10. [3:3] : 0 ANA not supported
  11. [2:2] : 0 PCI
  12. [1:1] : 0 Single Controller
  13. [0:0] : 0 Single Port
  14.  
  15. mdts : 6
  16. cntlid : 0x1
  17. ver : 0x10300
  18. rtd3r : 0x7a120
  19. rtd3e : 0x1e8480
  20. oaes : 0x200
  21. [31:31] : 0 Discovery Log Change Notice Not Supported
  22. [27:27] : 0 Zone Descriptor Changed Notices Not Supported
  23. [15:15] : 0 Normal NSS Shutdown Event Not Supported
  24. [14:14] : 0 Endurance Group Event Aggregate Log Page Change Notice Not Supported
  25. [13:13] : 0 LBA Status Information Notices Not Supported
  26. [12:12] : 0 Predictable Latency Event Aggregate Log Change Notices Not Supported
  27. [11:11] : 0 Asymmetric Namespace Access Change Notices Not Supported
  28. [9:9] : 0x1 Firmware Activation Notices Supported
  29. [8:8] : 0 Namespace Attribute Changed Event Not Supported
  30.  
  31. ctratt : 0
  32. [19:19] : 0 Flexible Data Placement Not Supported
  33. [15:15] : 0 Extended LBA Formats Not Supported
  34. [14:14] : 0 Delete NVM Set Not Supported
  35. [13:13] : 0 Delete Endurance Group Not Supported
  36. [12:12] : 0 Variable Capacity Management Not Supported
  37. [11:11] : 0 Fixed Capacity Management Not Supported
  38. [10:10] : 0 Multi Domain Subsystem Not Supported
  39. [9:9] : 0 UUID List Not Supported
  40. [8:8] : 0 SQ Associations Not Supported
  41. [7:7] : 0 Namespace Granularity Not Supported
  42. [6:6] : 0 Traffic Based Keep Alive Not Supported
  43. [5:5] : 0 Predictable Latency Mode Not Supported
  44. [4:4] : 0 Endurance Groups Not Supported
  45. [3:3] : 0 Read Recovery Levels Not Supported
  46. [2:2] : 0 NVM Sets Not Supported
  47. [1:1] : 0 Non-Operational Power State Permissive Not Supported
  48. [0:0] : 0 128-bit Host Identifier Not Supported
  49.  
  50. rrls : 0
  51. cntrltype : 0
  52. [7:2] : 0 Reserved
  53. [1:0] : 0 Controller type not reported
  54. fguid : 00000000-0000-0000-0000-000000000000
  55. crdt1 : 0
  56. crdt2 : 0
  57. crdt3 : 0
  58. nvmsr : 0
  59. [1:1] : 0 NVM subsystem Not part of an Enclosure
  60. [0:0] : 0 NVM subsystem Not part of a Storage Device
  61.  
  62. vwci : 0
  63. [7:7] : 0 VPD Write Cycles Remaining field is Not valid.
  64. [6:0] : 0 VPD Write Cycles Remaining
  65.  
  66. mec : 0
  67. [1:1] : 0 NVM subsystem Not contains a Management Endpoint on a PCIe port
  68. [0:0] : 0 NVM subsystem Not contains a Management Endpoint on an SMBus/I2C port
  69.  
  70. oacs : 0x17
  71. [10:10] : 0 Lockdown Command and Feature Not Supported
  72. [9:9] : 0 Get LBA Status Capability Not Supported
  73. [8:8] : 0 Doorbell Buffer Config Not Supported
  74. [7:7] : 0 Virtualization Management Not Supported
  75. [6:6] : 0 NVMe-MI Send and Receive Not Supported
  76. [5:5] : 0 Directives Not Supported
  77. [4:4] : 0x1 Device Self-test Supported
  78. [3:3] : 0 NS Management and Attachment Not Supported
  79. [2:2] : 0x1 FW Commit and Download Supported
  80. [1:1] : 0x1 Format NVM Supported
  81. [0:0] : 0x1 Security Send and Receive Supported
  82.  
  83. acl : 3
  84. aerl : 7
  85. frmw : 0x16
  86. [5:5] : 0 Multiple FW or Boot Update Detection Not Supported
  87. [4:4] : 0x1 Firmware Activate Without Reset Supported
  88. [3:1] : 0x3 Number of Firmware Slots
  89. [0:0] : 0 Firmware Slot 1 Read/Write
  90.  
  91. lpa : 0x2
  92. [6:6] : 0 Telemetry Log Data Area 4 Not Supported
  93. [5:5] : 0 LID 0x0, Scope of each command in LID 0x5, 0x12, 0x13 Not Supported
  94. [4:4] : 0 Persistent Event log Not Supported
  95. [3:3] : 0 Telemetry host/controller initiated log page Not Supported
  96. [2:2] : 0 Extended data for Get Log Page Not Supported
  97. [1:1] : 0x1 Command Effects Log Page Supported
  98. [0:0] : 0 SMART/Health Log Page per NS Not Supported
  99.  
  100. elpe : 255
  101. [7:0] : 255 (0's based) Error Log Page Entries (ELPE)
  102.  
  103. npss : 4
  104. [7:0] : 4 (0's based) Number of Power States Support (NPSS)
  105.  
  106. avscc : 0x1
  107. [0:0] : 0x1 Admin Vendor Specific Commands uses NVMe Format
  108.  
  109. apsta : 0x1
  110. [0:0] : 0x1 Autonomous Power State Transitions Supported
  111.  
  112. wctemp : 359
  113. [15:0] : 86 °C (359 K) Warning Composite Temperature Threshold (WCTEMP)
  114.  
  115. cctemp : 360
  116. [15:0] : 87 °C (360 K) Critical Composite Temperature Threshold (CCTEMP)
  117.  
  118. mtfa : 0
  119. hmpre : 0
  120. hmmin : 0
  121. tnvmcap : 0
  122. [127:0] : 0
  123. Total NVM Capacity (TNVMCAP)
  124.  
  125. unvmcap : 0
  126. [127:0] : 0
  127. Unallocated NVM Capacity (UNVMCAP)
  128.  
  129. rpmbs : 0
  130. [31:24]: 0 Access Size
  131. [23:16]: 0 Total Size
  132. [5:3] : 0 Authentication Method
  133. [2:0] : 0 Number of RPMB Units
  134.  
  135. edstt : 60
  136. dsto : 1
  137. fwug : 0
  138. kas : 0
  139. hctma : 0x1
  140. [0:0] : 0x1 Host Controlled Thermal Management Supported
  141.  
  142. mntmt : 273
  143. [15:0] : 0 °C (273 K) Minimum Thermal Management Temperature (MNTMT)
  144.  
  145. mxtmt : 358
  146. [15:0] : 85 °C (358 K) Maximum Thermal Management Temperature (MXTMT)
  147.  
  148. sanicap : 0x2
  149. [31:30] : 0 Additional media modification after sanitize operation completes successfully is not defined
  150. [29:29] : 0 No-Deallocate After Sanitize bit in Sanitize command Supported
  151. [2:2] : 0 Overwrite Sanitize Operation Not Supported
  152. [1:1] : 0x1 Block Erase Sanitize Operation Supported
  153. [0:0] : 0 Crypto Erase Sanitize Operation Not Supported
  154.  
  155. hmminds : 0
  156. hmmaxd : 0
  157. nsetidmax : 0
  158. endgidmax : 0
  159. anatt : 0
  160. anacap : 0
  161. [7:7] : 0 Non-zero group ID Not Supported
  162. [6:6] : 0 Group ID does change
  163. [4:4] : 0 ANA Change state Not Supported
  164. [3:3] : 0 ANA Persistent Loss state Not Supported
  165. [2:2] : 0 ANA Inaccessible state Not Supported
  166. [1:1] : 0 ANA Non-optimized state Not Supported
  167. [0:0] : 0 ANA Optimized state Not Supported
  168.  
  169. anagrpmax : 0
  170. nanagrpid : 0
  171. pels : 0
  172. domainid : 0
  173. megcap : 0
  174. sqes : 0x66
  175. [7:4] : 0x6 Max SQ Entry Size (64)
  176. [3:0] : 0x6 Min SQ Entry Size (64)
  177.  
  178. cqes : 0x44
  179. [7:4] : 0x4 Max CQ Entry Size (16)
  180. [3:0] : 0x4 Min CQ Entry Size (16)
  181.  
  182. maxcmd : 0
  183. nn : 1
  184. oncs : 0x5e
  185. [8:8] : 0 Copy Not Supported
  186. [7:7] : 0 Verify Not Supported
  187. [6:6] : 0x1 Timestamp Supported
  188. [5:5] : 0 Reservations Not Supported
  189. [4:4] : 0x1 Save and Select Supported
  190. [3:3] : 0x1 Write Zeroes Supported
  191. [2:2] : 0x1 Data Set Management Supported
  192. [1:1] : 0x1 Write Uncorrectable Supported
  193. [0:0] : 0 Compare Not Supported
  194.  
  195. fuses : 0
  196. [0:0] : 0 Fused Compare and Write Not Supported
  197.  
  198. fna : 0
  199. [3:3] : 0 Format NVM Broadcast NSID (FFFFFFFFh) Supported
  200. [2:2] : 0 Crypto Erase Not Supported as part of Secure Erase
  201. [1:1] : 0 Crypto Erase Applies to Single Namespace(s)
  202. [0:0] : 0 Format Applies to Single Namespace(s)
  203.  
  204. vwc : 0x1
  205. [2:1] : 0 Support for the NSID field set to FFFFFFFFh is not indicated
  206. [0:0] : 0x1 Volatile Write Cache Present
  207.  
  208. awun : 0
  209. awupf : 0
  210. icsvscc : 1
  211. [0:0] : 0x1 NVM Vendor Specific Commands uses NVMe Format
  212.  
  213. nwpc : 0
  214. [2:2] : 0 Permanent Write Protect Not Supported
  215. [1:1] : 0 Write Protect Until Power Supply Not Supported
  216. [0:0] : 0 No Write Protect and Write Protect Namespace Not Supported
  217.  
  218. acwu : 0
  219. ocfs : 0
  220. [1:1] : 0 Controller Copy Format 1h Not Supported
  221. [0:0] : 0 Controller Copy Format 0h Not Supported
  222.  
  223. sgls : 0
  224. [15:8] : 0 SGL Descriptor Threshold
  225. [1:0] : 0 Scatter-Gather Lists Not Supported
  226.  
  227. mnan : 0
  228. maxdna : 0
  229. maxcna : 0
  230. oaqd : 0
  231. subnqn :
  232. ioccsz : 0
  233. iorcsz : 0
  234. icdoff : 0
  235. fcatt : 0
  236. [0:0] : 0 Dynamic Controller Model
  237.  
  238. msdbd : 0
  239. ofcs : 0
  240. [0:0] : 0 Disconnect command Not Supported
  241.  
  242. ps 0 : mp:6.3000W operational enlat:5 exlat:5 rrt:0 rrl:0
  243. rwt:0 rwl:0 idle_power:- active_power:-
  244. active_power_workload:-
  245. ps 1 : mp:2.4000W operational enlat:30 exlat:30 rrt:1 rrl:1
  246. rwt:1 rwl:1 idle_power:- active_power:-
  247. active_power_workload:-
  248. ps 2 : mp:1.9000W operational enlat:100 exlat:100 rrt:2 rrl:2
  249. rwt:2 rwl:2 idle_power:- active_power:-
  250. active_power_workload:-
  251. ps 3 : mp:0.0500W non-operational enlat:1000 exlat:1000 rrt:3 rrl:3
  252. rwt:3 rwl:3 idle_power:- active_power:-
  253. active_power_workload:-
  254. ps 4 : mp:0.0040W non-operational enlat:1000 exlat:9000 rrt:3 rrl:3
  255. rwt:3 rwl:3 idle_power:- active_power:-
  256. active_power_workload:-
  257.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!