<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.4.0-twrp-klte-unified-1.7 (jc@gallifrey) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #1 SMP PREEMPT Tue May 24 00:10:55 EDT 2016
<4>[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: SAMSUNG K PROJECT REV14
<6>[    0.000000] Recovery Boot Mode
<6>[    0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
<6>[    0.000000] qcom,ion-heap@30 reserved EBI1 size 9600000
<6>[    0.000000] qcom,mdss_fb_primary reserved EBI1 size 1f00000
<6>[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-4100000
<6>[    0.000000] Node qcom,wdt@f9017000 memblock_reserve memory 0-4000
<6>[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
<6>[    0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
<6>[    0.000000] Node qcom,msm-mem-hole removed memory 4d00000-d200000
<6>[    0.000000] Node qcom,msm-mem-hole removed memory fa00000-10200000
<6>[    0.000000] Initialized persistent memory from 7fa00000-7fafffff
<6>[    0.000000] memory pool 3 (start 0x73b00000 size bf00000) initialized
<6>[    0.000000] cma: CMA: reserved 16 MiB at 2a800000
<6>[    0.000000] cma: Found secure_region, memory base 0, size 165 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 168 MiB at 69000000
<6>[    0.000000] cma: Found adsp_region, memory base 0, size 75 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 76 MiB at 64400000
<6>[    0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 20 MiB at 63000000
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[    0.000000] IMEM DT static mapping successful
<7>[    0.000000] On node 0 totalpages: 439296
<7>[    0.000000] free_area_init_node: node 0, pgdat c0fcaec0, node_mem_map cd200000
<7>[    0.000000]   Normal zone: 1398 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 141450 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 2698 pages used for memmap
<7>[    0.000000]   HighMem zone: 293750 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @ce252000 s16000 r0 d12672 u32768
<7>[    0.000000] pcpu-alloc: s16000 r0 d12672 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 435200
<5>[    0.000000] Kernel command line: console=null androidboot.hardware=qcom androidboot.bootdevice=msm_sdcc.1 user_debug=31 msm_rtb.filter=0x3F androidboot.sec_atd.tty=/dev/ttyHSL0 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debug.reset_reason=0x0 mdss_mdp.panel=1:dsi:0:mdss_dsi_samsung_1080p_cmd_fa2 lcd_id=0x602813 Panelres=1 pmic_info=4 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=199301213f43f6b27a00a252bb55cb92 connie=SM-G900W8_OPEN_CAN_b73781c5234cca1ae44ec0d18f7954cf sysscope=0xee000000 loglevel=4 samsung.hardware=SM-G900W8 androidboot.revision=14 androidboot.emmc_checksum=3 androidboot.warranty_bit=1 fg_reset=0 androidboot.bootloader=G900W8VLS1DPF3 androidboot.nvdata_backup=0 androidboot.boot_recovery=1 uart_dbg=0 sec_debug.pmc8974_rev=2 vmalloc=450m level=0x574f4c44 androidboot.emmc=true androidboot.serialno=3d7d63d7 androidboot.baseband=msm
<0>[    0.000000] sec_dbg_setup: str=@0x10100008
<0>[    0.000000] sec_dbg_setup: secdbg_paddr = 0x10100008
<0>[    0.000000] sec_dbg_setup: secdbg_size = 0x80000
<6>[    0.000000] get_lcd_id_cmdline: LCD_ID = 0x602813, lcd_attached =1
<6>[    0.000000] lcd_panel_info k FHD LSI
<6>[    0.000000] /home/jc/build/nethunter-kernel/klte/drivers/extcon/extcon-max77804k.c get_if_pmic_inifo: switch_sel: 4 if_pmic_rev:0
<6>[    0.000000] sec_bat_get_fg_reset, fg_reset:0
<6>[    0.000000] get_lpm_mode:not lpm mode
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 77MB 40MB 1593MB 6MB = 1716MB total
<5>[    0.000000] Memory: 1412148k/1412148k available, 540620k reserved, 914432K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000] 	   vmalloc : 0xec000000 - 0xff000000   ( 304 MB)
<5>[    0.000000] 	    lowmem : 0xd0200000 - 0xebb00000   ( 441 MB)
<5>[    0.000000] 	   vmalloc : 0xcfa00000 - 0xd0200000   (   8 MB)
<5>[    0.000000] 	    lowmem : 0xcd200000 - 0xcfa00000   (  40 MB)
<5>[    0.000000] 	   vmalloc : 0xc4d00000 - 0xcd200000   ( 133 MB)
<5>[    0.000000] 	    lowmem : 0xc0000000 - 0xc4d00000   (  77 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0d98274   (13889 kB)
<5>[    0.000000]       .init : 0xc0e00000 - 0xc0f0de80   (1080 kB)
<5>[    0.000000]       .data : 0xc0f0e000 - 0xc0fcfeac   ( 776 kB)
<5>[    0.000000]        .bss : 0xc0fcfed0 - 0xc166d49c   (6774 kB)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
<6>[    0.000000] Switching to timer-based delay loop
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[    0.000097] pid_max: default: 32768 minimum: 301
<6>[    0.000224] Security Framework initialized
<6>[    0.000237] SELinux:  Initializing.
<7>[    0.000285] SELinux:  Starting in permissive mode
<6>[    0.000335] Mount-cache hash table entries: 512
<6>[    0.001028] Initializing cgroup subsys cpuacct
<6>[    0.001039] Initializing cgroup subsys freezer
<6>[    0.001075] CPU: Testing write buffer coherency: ok
<6>[    0.001238] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001296] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[    0.003826] Setting up static identity map for 0x998200 - 0x998288
<6>[    0.003839] MSM Memory Dump table set up
<3>[    0.003849] set_dload_mode <1> ( c0e0d468 )
<6>[    0.005179] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.005909] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<6>[    0.006628] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[    0.006705] Brought up 4 CPUs
<6>[    0.006718] SMP: Total of 4 processors activated (153.60 BogoMIPS).
<6>[    0.018090] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
<4>[    0.018112] ------------[ cut here ]------------
<4>[    0.018123] WARNING: at /home/jc/build/nethunter-kernel/klte/fs/proc/generic.c:323 0xc028aeb8()
<4>[    0.018132] name 'cpu/vfp_bounce'
<4>[    0.018146] Function entered at [<c010b440>] from [<c01932e8>]
<4>[    0.018157] Function entered at [<c01932e8>] from [<c0193358>]
<4>[    0.018167] Function entered at [<c0193358>] from [<c028aeb8>]
<4>[    0.018178] Function entered at [<c028aeb8>] from [<c028af18>]
<4>[    0.018187] Function entered at [<c028af18>] from [<c028b1f4>]
<4>[    0.018196] Function entered at [<c028b1f4>] from [<c0e030bc>]
<4>[    0.018206] Function entered at [<c0e030bc>] from [<c0e00c08>]
<4>[    0.018215] Function entered at [<c0e00c08>] from [<c0e00dc0>]
<4>[    0.018224] Function entered at [<c0e00dc0>] from [<c01063f8>]
<4>[    0.018250] ---[ end trace da227214a82491b7 ]---
<3>[    0.018259] Failed to create procfs node for VFP bounce reporting
<6>[    0.018331] [suspend helper] suspend_helper_init: init done
<6>[    0.018611] dummy:
<6>[    0.030393] NET: Registered protocol family 16
<6>[    0.033530] DMA: preallocated 256 KiB pool for atomic coherent allocations
<0>[    0.035482] sec_debug_init: enable=0
<0>[    0.035492] sec_debug_init:__raw_readl restart_reason=-1467858375
<0>[    0.035501] sec_debug_init: restart_reason : 0xfa00a65c
<6>[    0.035914] KPI: Bootloader start count = 37440
<6>[    0.035922] KPI: Bootloader end count = 96277
<6>[    0.035929] KPI: Bootloader display count = 74299
<6>[    0.035936] KPI: Bootloader load kernel count = 1897
<6>[    0.035945] KPI: Kernel MPM timestamp = 180849
<6>[    0.035953] KPI: Kernel MPM Clock frequency = 32768
<6>[    0.035968] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536
<6>[    0.035974]  accessory_chip=0, hw_plat_subtype=1, pmic_model=65542, pmic_die_revision=131073
<6>[    0.036697] persistent_ram: uncorrectable error in header
<6>[    0.036707] persistent_ram: no valid data in buffer (sig = 0xaaaaaaaa)
<6>[    0.037919] console [ram-1] enabled
<6>[    0.051701] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
<6>[    0.066122] WDOG_V2 handled by TZ:dump @0xea50c000 PA:2a50c000
<6>[    0.066173] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
<6>[    0.087796] 8084_s1: 675 <--> 1050 mV at 0 mV normal idle
<6>[    0.088181] 8084_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
<6>[    0.088548] 8084_s1_so: 675 <--> 1050 mV at 675 mV normal idle
<6>[    0.088949] 8084_s2: 500 <--> 1050 mV at 0 mV normal idle
<6>[    0.089318] 8084_s2_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.089689] 8084_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.090049] 8084_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.090461] 8084_s3: 1300 mV normal idle
<6>[    0.090839] 8084_s4: 1800 mV normal idle
<6>[    0.091225] 8084_s5: 2150 mV normal idle
<6>[    0.091637] 8084_s6: 1050 mV normal idle
<6>[    0.092016] 8084_s7: 815 <--> 900 mV at 0 mV normal idle
<6>[    0.092386] 8084_s7_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.092739] 8084_s7_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.093148] 8084_l1: 1225 mV normal idle
<6>[    0.093533] 8084_l2: 1200 mV normal idle
<6>[    0.093917] 8084_l3: 1050 <--> 1200 mV at 1200 mV normal idle
<6>[    0.094299] 8084_l4: 1200 <--> 1225 mV at 1225 mV normal idle
<6>[    0.094685] 8084_l5: 1800 mV normal idle
<6>[    0.095071] 8084_l6: 1800 mV normal idle
<6>[    0.095469] 8084_l7: 1800 mV normal idle
<6>[    0.095838] 8084_l8: 1800 mV normal idle
<6>[    0.096226] 8084_l9: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.096614] 8084_l10: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.097003] 8084_l11: 1300 mV normal idle
<6>[    0.097393] 8084_l12: 1800 mV normal idle
<6>[    0.097750] 8084_l12_ao: 1800 mV normal idle
<6>[    0.098145] 8084_l13: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.098533] 8084_l14: 1800 mV normal idle
<6>[    0.098925] 8084_l15: 2050 mV normal idle
<6>[    0.099311] 8084_l16: 2700 mV normal idle
<6>[    0.099717] 8084_l17: 2850 mV normal idle
<6>[    0.100104] 8084_l18: 2850 mV normal idle
<6>[    0.100503] 8084_l19: 2900 <--> 3300 mV at 2900 mV normal idle
<6>[    0.100897] 8084_l20: 2950 mV normal idle
<6>[    0.101318] 8084_l21: 2950 mV normal idle
<6>[    0.101739] 8084_l22: 3000 <--> 3300 mV at 3000 mV normal idle
<6>[    0.102122] 8084_l23: 3000 mV normal idle
<6>[    0.102503] 8084_l24: 3075 mV normal idle
<6>[    0.102883] 8084_l25: 2100 mV normal idle
<6>[    0.103266] 8084_l26: 1800 <--> 2050 mV at 2050 mV normal idle
<6>[    0.103644] 8084_l27: 1000 <--> 1225 mV at 1200 mV normal idle
<6>[    0.104036] 8084_lvs1:
<6>[    0.104371] 8084_lvs2:
<6>[    0.104718] 8084_lvs3:
<6>[    0.105058] 8084_lvs4:
<6>[    0.107357] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
<6>[    0.107368] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
<6>[    0.107648] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.108079] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.108504] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.108916] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.137568] msm-thermal qcom,msm-thermal.74: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
<6>[    0.137588] msm-thermal qcom,msm-thermal.74: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
<6>[    0.138372] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
<6>[    0.138547] msm-thermal qcom,msm-thermal.74: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
<3>[    0.138677] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<4>[    0.139286] 8084_l18: Failed to create debugfs directory
<4>[    0.139306] 8084_lvs1: Failed to create debugfs directory
<6>[    0.141375] sensor_hub_init: power on
<6>[    0.141404] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.141415] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.143281] 8084_mvs1:
<6>[    0.147116] sps:BAM 0xf9984000 (va:0xc4ee0000) enabled: ver:0x6, number of pipes:20
<6>[    0.147127] sps:BAM 0xf9984000 is registered.
<6>[    0.147142] sps:sps is ready.
<6>[    0.149763] gdsc_venus:
<6>[    0.150038] gdsc_mdss:
<6>[    0.150354] gdsc_jpeg:
<6>[    0.150687] gdsc_vfe:
<6>[    0.150935] gdsc_oxili_gx:
<6>[    0.150997] gdsc_oxili_gx: supplied by 8084_s7_corner
<6>[    0.151273] gdsc_oxili_cx:
<6>[    0.151498] gdsc_usb_hsic:
<3>[    0.152135] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[    0.157561] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5200000
<6>[    0.158103] Physical OCMEM zone layout:
<6>[    0.158115]  zone graphics	: 0xfec00000 - 0xfecfffff (1024 KB)
<6>[    0.158127]  zone lp_audio	: 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.158139]  zone video	: 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.177604] bio: create slab <bio-0> at 0
<6>[    0.178364] ethernet_phy:
<6>[    0.178607] vph_pwr:
<6>[    0.178948] max77826_module_init
<6>[    0.179933] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
<3>[    0.180017] ION-heap mm: Cannot specify alignment for this type of heap
<6>[    0.180298] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
<3>[    0.180378] ION-heap adsp: Cannot specify alignment for this type of heap
<6>[    0.180556] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
<6>[    0.181253] ION heap iommuca created
<6>[    0.181294] ION heap system created
<6>[    0.181402] ION heap kmalloc created
<6>[    0.181430] ION heap mm created at 0x69000000 with size a500000
<6>[    0.181454] ION heap adsp created at 0x64400000 with size 4b00000
<6>[    0.181476] ION heap qsecom created at 0x63000000 with size 1100000
<6>[    0.181553] ION heap audio created at 0x73b00000 with size 614000
<6>[    0.181614] ION heap pil_1 created at 0x04d00000 with size 1d00000
<6>[    0.181641] ION heap pil_2 created at 0x08000000 with size 5100000
<6>[    0.181960] ION heap camera_preview created at 0x74114000 with size 9600000
<5>[    0.183430] SCSI subsystem initialized
<6>[    0.183534] usbcore: registered new interface driver usbfs
<6>[    0.183586] usbcore: registered new interface driver hub
<6>[    0.183690] usbcore: registered new device driver usb
<6>[    0.184623] max77804k 13-0066: max77804k_i2c_probe
<6>[    0.184924] of_max77804k_dt: irq-gpio: 102
<6>[    0.184932] of_max77804k_dt: irq-base: 306
<6>[    0.184940] of_max77804k_dt: wc-irq-gpio: 0
<6>[    0.184950] of_max77804k_dt: timeout: 0
<6>[    0.184957] of_max77804k_dt: duty: 0
<6>[    0.184964] of_max77804k_dt: period: 0
<6>[    0.184971] of_max77804k_dt: pwm_id: 0
<6>[    0.185415] max77804k_i2c_probe: device found: rev.0x3, ver.0x0
<6>[    0.186316] func: max77804k_irq_init, irq_gpio: 102, irq_base: 306
<6>[    0.248311] max77804k-safeout max77804k-safeout: max77804k_pmic_probe
<6>[    0.248324] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:496] pdata->num_regulators:3
<6>[    0.248336] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.248421] regulator regulator.61: func:max77804k_reg_enable
<6>[    0.249183] regulator regulator.61: func:max77804k_get_voltage
<6>[    0.249194] regulator regulator.61: func:max77804k_get_voltage_register
<6>[    0.249630] regulator regulator.61: func:max77804k_list_voltage_safeout
<6>[    0.249642] safeout1 range: at 4900 mV
<6>[    0.249650] regulator regulator.61: func:max77804k_get_voltage
<6>[    0.249660] regulator regulator.61: func:max77804k_get_voltage_register
<6>[    0.250095] regulator regulator.61: func:max77804k_list_voltage_safeout
<3>[    0.250196] Error-Bad Function Input
<6>[    0.250409] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.250493] regulator regulator.62: func:max77804k_get_voltage
<6>[    0.250503] regulator regulator.62: func:max77804k_get_voltage_register
<6>[    0.250942] regulator regulator.62: func:max77804k_list_voltage_safeout
<6>[    0.250953] safeout2 range: at 4900 mV
<6>[    0.250961] regulator regulator.62: func:max77804k_get_voltage
<6>[    0.250970] regulator regulator.62: func:max77804k_get_voltage_register
<6>[    0.251406] regulator regulator.62: func:max77804k_list_voltage_safeout
<3>[    0.251487] Error-Bad Function Input
<6>[    0.251605] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.251682] regulator regulator.63: func:max77804k_reg_enable
<6>[    0.252474] regulator regulator.63: func:max77804k_get_voltage
<6>[    0.252485] regulator regulator.63: func:max77804k_get_voltage_register
<6>[    0.252920] regulator regulator.63: func:max77804k_list_voltage
<6>[    0.252931] CHARGER: 60 <--> 2580 mA at 360 mA
<6>[    0.253942] i2c-gpio i2c.87: using pins 60 (SDA) and 61 (SCL)
<6>[    0.254401] i2c-gpio i2c.88: using pins 87 (SDA) and 88 (SCL)
<6>[    0.254743] max77826_i2c_probe
<6>[    0.254752] max77826_i2c_probe: pdata
<6>[    0.255190] max77826_i2c_probe: DEVICE_ID: 0x2
<6>[    0.255272] max77826_get_voltage_register: id=0, reg=0x20, shift=0x0, mask=0x7f
<6>[    0.255711] max77826_ldo_set_voltage: id=0, reg=0x20, mask=0x7f, val=0x20, new=0x30
<6>[    0.256471] max77826_ldo1: 1200 mV normal
<6>[    0.256481] max77826_get_voltage_register: id=0, reg=0x20, shift=0x0, mask=0x7f
<6>[    0.257111] max77826_get_voltage_register: id=1, reg=0x21, shift=0x0, mask=0x7f
<6>[    0.257550] max77826_ldo_set_voltage: id=1, reg=0x21, mask=0x7f, val=0x20, new=0x20
<6>[    0.258308] max77826_ldo2: 1000 mV normal
<6>[    0.258318] max77826_get_voltage_register: id=1, reg=0x21, shift=0x0, mask=0x7f
<6>[    0.258941] max77826_get_voltage_register: id=2, reg=0x22, shift=0x0, mask=0x7f
<6>[    0.259380] max77826_ldo_set_voltage: id=2, reg=0x22, mask=0x7f, val=0x20, new=0x30
<6>[    0.260138] max77826_ldo3: 1200 mV normal
<6>[    0.260148] max77826_get_voltage_register: id=2, reg=0x22, shift=0x0, mask=0x7f
<6>[    0.260770] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    0.261209] max77826_ldo_set_voltage: id=3, reg=0x23, mask=0x7f, val=0x1c, new=0x28
<6>[    0.261992] max77826_ldo4: 1800 mV normal
<6>[    0.262002] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    0.262619] max77826_get_voltage_register: id=4, reg=0x24, shift=0x0, mask=0x7f
<6>[    0.263058] max77826_ldo_set_voltage: id=4, reg=0x24, mask=0x7f, val=0x28, new=0x28
<6>[    0.263816] max77826_ldo5: 1800 mV normal
<6>[    0.263826] max77826_get_voltage_register: id=4, reg=0x24, shift=0x0, mask=0x7f
<6>[    0.264459] max77826_get_voltage_register: id=5, reg=0x25, shift=0x0, mask=0x7f
<6>[    0.264898] max77826_ldo6: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.264908] max77826_get_voltage_register: id=5, reg=0x25, shift=0x0, mask=0x7f
<6>[    0.265526] max77826_get_voltage_register: id=6, reg=0x26, shift=0x0, mask=0x7f
<6>[    0.265965] max77826_ldo_set_voltage: id=6, reg=0x26, mask=0x7f, val=0x28, new=0x28
<6>[    0.266724] max77826_ldo7: 1800 mV normal
<6>[    0.266733] max77826_get_voltage_register: id=6, reg=0x26, shift=0x0, mask=0x7f
<6>[    0.267362] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    0.267800] max77826_ldo8: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.267811] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    0.268429] max77826_get_voltage_register: id=8, reg=0x28, shift=0x0, mask=0x7f
<6>[    0.268868] max77826_ldo_set_voltage: id=8, reg=0x28, mask=0x7f, val=0x28, new=0x28
<6>[    0.269626] max77826_ldo9: 1800 mV normal
<6>[    0.269636] max77826_get_voltage_register: id=8, reg=0x28, shift=0x0, mask=0x7f
<6>[    0.270267] max77826_get_voltage_register: id=9, reg=0x29, shift=0x0, mask=0x7f
<6>[    0.270706] max77826_ldo10: 2800 <--> 2950 mV at 2800 mV normal
<6>[    0.270716] max77826_get_voltage_register: id=9, reg=0x29, shift=0x0, mask=0x7f
<6>[    0.271332] max77826_get_voltage_register: id=10, reg=0x2a, shift=0x0, mask=0x7f
<6>[    0.271799] max77826_ldo11: 2700 <--> 2950 mV at 2800 mV normal
<6>[    0.271811] max77826_get_voltage_register: id=10, reg=0x2a, shift=0x0, mask=0x7f
<6>[    0.272444] max77826_get_voltage_register: id=11, reg=0x2b, shift=0x0, mask=0x7f
<6>[    0.272881] max77826_ldo12: 2500 <--> 3300 mV at 3300 mV normal
<6>[    0.272892] max77826_get_voltage_register: id=11, reg=0x2b, shift=0x0, mask=0x7f
<6>[    0.273513] max77826_get_voltage_register: id=12, reg=0x2c, shift=0x0, mask=0x7f
<6>[    0.273952] max77826_ldo_set_voltage: id=12, reg=0x2c, mask=0x7f, val=0x64, new=0x64
<6>[    0.274710] max77826_ldo13: 3300 mV normal
<6>[    0.274720] max77826_get_voltage_register: id=12, reg=0x2c, shift=0x0, mask=0x7f
<6>[    0.275337] max77826_get_voltage_register: id=13, reg=0x2d, shift=0x0, mask=0x7f
<6>[    0.275776] max77826_ldo_set_voltage: id=13, reg=0x2d, mask=0x7f, val=0x64, new=0x64
<6>[    0.276534] max77826_ldo14: 3300 mV normal
<6>[    0.276544] max77826_get_voltage_register: id=13, reg=0x2d, shift=0x0, mask=0x7f
<6>[    0.277189] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    0.277627] max77826_ldo15: 1800 <--> 3300 mV at 3300 mV normal
<6>[    0.277637] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    0.278254] max77826_get_voltage_register: id=15, reg=0x31, shift=0x0, mask=0xff
<6>[    0.278693] max77826_ldo_set_voltage: id=15, reg=0x31, mask=0xff, val=0x70, new=0x74
<6>[    0.279453] max77826_buck1: 1225 mV normal
<6>[    0.279463] max77826_get_voltage_register: id=15, reg=0x31, shift=0x0, mask=0xff
<6>[    0.280092] max77826_get_voltage_register: id=16, reg=0x33, shift=0x0, mask=0x7f
<6>[    0.280530] max77826_ldo_set_voltage: id=16, reg=0x33, mask=0x7f, val=0x48, new=0x40
<6>[    0.281288] max77826_buck2: 3400 mV normal
<6>[    0.281297] max77826_get_voltage_register: id=16, reg=0x33, shift=0x0, mask=0x7f
<6>[    0.281886] i2c-gpio i2c.92: using pins 29 (SDA) and 30 (SCL)
<6>[    0.282325] i2c-gpio i2c.93: using pins 120 (SDA) and 121 (SCL)
<6>[    0.282707] i2c-gpio i2c.94: using pins 95 (SDA) and 96 (SCL)
<6>[    0.283161] i2c-gpio i2c.95: using pins 109 (SDA) and 108 (SCL)
<6>[    0.283766] Linux media interface: v0.10
<6>[    0.283810] Linux video capture interface: v2.00
<6>[    0.286338] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c4fe0000, with 3 ctx banks
<6>[    0.287419] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5080000, with 3 ctx banks
<6>[    0.289130] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c50a0000, with 5 ctx banks
<6>[    0.290129] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c50c0000, with 3 ctx banks
<6>[    0.291102] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c50e0000, with 3 ctx banks
<6>[    0.292241] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
<6>[    0.292357] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
<6>[    0.292474] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
<6>[    0.292596] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
<6>[    0.292718] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
<6>[    0.292827] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
<6>[    0.292953] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
<6>[    0.293079] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
<6>[    0.293192] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
<6>[    0.293301] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
<6>[    0.293413] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
<6>[    0.293558] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
<6>[    0.293669] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
<6>[    0.293782] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
<6>[    0.293906] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
<6>[    0.294016] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
<6>[    0.294124] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
<6>[    0.295593] [SENSORS CORE] sensors_class_init
<6>[    0.295731] fingerprint_class_init
<6>[    0.295804] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    0.296324] Bluetooth: Core ver 2.16
<6>[    0.296395] NET: Registered protocol family 31
<6>[    0.296405] Bluetooth: HCI device and connection manager initialized
<6>[    0.296417] Bluetooth: HCI socket layer initialized
<6>[    0.296427] Bluetooth: L2CAP socket layer initialized
<6>[    0.296627] Bluetooth: SCO socket layer initialized
<4>[    0.296872] regulatory is not upadted via queue_regulatory_request.
<6>[    0.298636] Switching to clocksource arch_sys_counter
<6>[    0.330945] NET: Registered protocol family 2
<6>[    0.331158] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.331763] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.333272] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    0.334009] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.334020] TCP: reno registered
<6>[    0.334035] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.334093] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.334422] NET: Registered protocol family 1
<6>[    0.334743] Trying to unpack rootfs image as initramfs...
<3>[    0.388811] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    0.638760] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    0.888798] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.138790] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.388788] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.638787] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.888788] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<6>[    2.123838] Freeing initrd memory: 3064K
<6>[    2.128652] FIPS: self-tests for aes-asm (aes) passed
<6>[    2.129493] FIPS: self-tests for sha1-asm (sha1) passed
<6>[    2.129710] FIPS: self-tests for sha1-neon (sha1) passed
<6>[    2.129985] FIPS: self-tests for sha512-neon (sha512) passed
<6>[    2.130232] FIPS: self-tests for sha384-neon (sha384) passed
<6>[    2.130291] Detected 9 counters on the L2CC PMU.
<7>[    2.132322] gpiochip_find_base: found new base at 992
<6>[    2.132446] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
<7>[    2.132993] gpiochip_find_base: found new base at 960
<6>[    2.133078] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
<7>[    2.133118] gpiochip_find_base: found new base at 928
<6>[    2.133206] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
<7>[    2.133751] gpiochip_find_base: found new base at 896
<6>[    2.133834] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
<7>[    2.133874] gpiochip_find_base: found new base at 864
<6>[    2.133956] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
<7>[    2.134524] gpiochip_find_base: found new base at 832
<6>[    2.134608] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
<7>[    2.134682] gpiochip_find_base: found new base at 800
<6>[    2.134764] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
<7>[    2.135341] gpiochip_find_base: found new base at 768
<6>[    2.135429] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
<7>[    2.135470] gpiochip_find_base: found new base at 736
<6>[    2.135553] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
<7>[    2.136151] gpiochip_find_base: found new base at 704
<6>[    2.136240] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
<7>[    2.136306] gpiochip_find_base: found new base at 672
<6>[    2.136390] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
<7>[    2.137010] gpiochip_find_base: found new base at 640
<6>[    2.137100] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
<7>[    2.137138] gpiochip_find_base: found new base at 608
<6>[    2.137222] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
<7>[    2.137864] gpiochip_find_base: found new base at 576
<6>[    2.137954] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
<7>[    2.138034] gpiochip_find_base: found new base at 544
<6>[    2.138119] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
<6>[    2.138756] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[    2.138794] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 36)(2 --- 34)(3 --- 35)(4 --- 37)(5 --- 40)(6 --- 40)(7 --- 39)(8 --- 39)(9 --- 36)(10 --- 34)
<3>[    2.138815] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<7>[    2.138825] gpiochip_find_base: found new base at 512
<6>[    2.138927] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
<7>[    2.138972] gpiochip_find_base: found new base at 480
<6>[    2.139054] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
<7>[    2.139735] gpiochip_find_base: found new base at 448
<6>[    2.139820] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
<6>[    2.141868] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
<6>[    2.146127] pil_venus fdce0000.qcom,venus: using secure boot
<6>[    2.156981] NET: Registered protocol family 27
<1>[    2.161875] dma_test_init, minor number 64
<6>[    2.163207] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
<6>[    2.163222] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 5
<6>[    2.163234] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
<6>[    2.166384] L2 @ 729600 KHz
<6>[    2.166507] CPU0 @ 960000 KHz
<6>[    2.166515] CPU1 @ unknown rate. Forcing new rate.
<6>[    2.166669] CPU1 @ 300000 KHz
<6>[    2.166688] CPU2 @ unknown rate. Forcing new rate.
<6>[    2.166849] CPU2 @ 300000 KHz
<6>[    2.166868] CPU3 @ unknown rate. Forcing new rate.
<6>[    2.167028] CPU3 @ 300000 KHz
<4>[    2.173395] ####init
<6>[    2.176336] SEC_MASTERSTATS : Init done
<5>[    2.179679] msm_rpm_log_probe: OK
<6>[    2.186737] register extcon notifier for JIG and docks
<6>[    2.195535] mpm_counter: [    2.195520]:(251607)
<3>[    2.200739] [BT] gpio_rev_init, gpio_bt_host_wake = 75
<7>[    2.201370] gpio_request: gpio-309 (bt_en) status -22
<3>[    2.201425] [BT] bcm4354_bluetooth_probe: gpio_request for gpio_bt_en is failed
<4>[    2.201526] ------------[ cut here ]------------
<4>[    2.201581] WARNING: at /home/jc/build/nethunter-kernel/klte/drivers/gpio/gpiolib.c:1317 0xc03cf93c()
<4>[    2.201589] Function entered at [<c010b440>] from [<c01932e8>]
<4>[    2.201594] Function entered at [<c01932e8>] from [<c01933bc>]
<4>[    2.201598] Function entered at [<c01933bc>] from [<c03cf93c>]
<4>[    2.201604] Function entered at [<c03cf93c>] from [<c018fe10>]
<4>[    2.201608] Function entered at [<c018fe10>] from [<c04a6b9c>]
<4>[    2.201614] Function entered at [<c04a6b9c>] from [<c04a6d7c>]
<4>[    2.201618] Function entered at [<c04a6d7c>] from [<c04a55fc>]
<4>[    2.201622] Function entered at [<c04a55fc>] from [<c04a5d04>]
<4>[    2.201626] Function entered at [<c04a5d04>] from [<c04a74e4>]
<4>[    2.201630] Function entered at [<c04a74e4>] from [<c0e00c08>]
<4>[    2.201635] Function entered at [<c0e00c08>] from [<c0e00dc0>]
<4>[    2.201639] Function entered at [<c0e00dc0>] from [<c01063f8>]
<4>[    2.201643] ---[ end trace da227214a82491b8 ]---
<6>[    2.201747] func:sec_therm_init
<6>[    2.201890] sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
<6>[    2.201924] sec_getlog_supply_kloginfo: 0xc1052010
<6>[    2.202015] audit: initializing netlink socket (enabled)
<4>[    2.202484] highmem bounce pool size: 64 pages
<6>[    2.204460] exFAT: Core Version 1.2.12
<6>[    2.204465] exFAT: FS Version 1.2.12
<6>[    2.204773] Registering sdcardfs 2.1.4
<6>[    2.204820] NTFS driver 2.1.30 [Flags: R/W].
<6>[    2.204909] fuse init (API version 7.18)
<7>[    2.205076] SELinux:  Registering netfilter hooks
<4>[    2.205332] key_dump feature not availabledek: initialized
<4>[    2.205341] SDP_MM: entering************************************************
<4>[    2.205385] SDP_PUB_CRYPTO[1]  : pub_crypto_mod_init netlink socket is created successfully!
<4>[    2.205436] SDP_FS_HANDLER[1]  : sdp_fs_handler_mod_init netlink socket is created successfully!
<6>[    2.205572] FIPS: No test for cipher_null (cipher_null-generic)
<6>[    2.205648] FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
<6>[    2.205719] FIPS: No test for digest_null (digest_null-generic)
<6>[    2.205787] FIPS: No test for compress_null (compress_null-generic)
<6>[    2.205855] FIPS: self-tests for non-FIPS md5-generic (md5) passed
<6>[    2.205962] FIPS: self-tests for sha1-generic (sha1) passed
<6>[    2.206053] FIPS: self-tests for sha224-generic (sha224) passed
<6>[    2.206138] FIPS: self-tests for sha256-generic (sha256) passed
<6>[    2.206274] FIPS: self-tests for sha384-generic (sha384) passed
<6>[    2.206400] FIPS: self-tests for sha512-generic (sha512) passed
<6>[    2.206496] FIPS: self-tests for des-generic (des) passed
<6>[    2.206589] FIPS: self-tests for des3_ede-generic (des3_ede) passed
<6>[    2.206653] FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
<6>[    2.206749] FIPS: self-tests for aes-generic (aes) passed
<6>[    2.206813] FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
<6>[    2.206876] FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
<6>[    2.206975] FIPS: self-tests for crc32c-generic (crc32c) passed
<6>[    2.207043] FIPS: No test for stdrng (krng)
<6>[    2.214633] FIPS: self-tests for ansi_cprng (stdrng) passed
<6>[    2.214703] FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
<3>[    2.214740] FIPS : Tcrypt Tests Start
<6>[    2.214928] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[    2.214971] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[    2.215160] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[    2.215218] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[    2.215332] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[    2.215370] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[    2.215547] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[    2.215596] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[    2.215715] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[    2.215760] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[    2.215942] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[    2.215999] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[    2.216029] FIPS: self-tests for sha1-generic (sha1) passed
<6>[    2.216054] FIPS: self-tests for sha224-generic (sha224) passed
<6>[    2.216077] FIPS: self-tests for sha256-generic (sha256) passed
<6>[    2.216144] FIPS: self-tests for sha384-generic (sha384) passed
<6>[    2.216210] FIPS: self-tests for sha512-generic (sha512) passed
<6>[    2.216237] FIPS: self-tests for sha1-asm (sha1) passed
<6>[    2.216387] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[    2.216454] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[    2.216604] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[    2.216676] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[    2.216831] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[    2.216908] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[    2.217112] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[    2.217237] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[    2.217540] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[    2.217766] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[    2.218068] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[    2.218293] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[    2.226009] FIPS: self-tests for fips_ansi_cprng (ansi_cprng) passed
<3>[    2.226013] FIPS : Tcrypt Tests End
<3>[    2.226076] FIPS(query_symbol_addresses): Error Invalid Addresses.
<3>[    2.226175] FIPS(do_integrity_check): Error to get start / end addresses
<3>[    2.226281] tcrypt: CRYPTO API started in FIPS mode!!!
<6>[    2.226501] FIPS: self-tests for ghash-generic (ghash) passed
<6>[    2.226581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
<6>[    2.226588] io scheduler noop registered (default)
<7>[    2.226934] gpiochip_find_base: found new base at 426
<6>[    2.226973] gpiochip_add: registered GPIOs 426 to 447 on device: pma8084-gpio
<7>[    2.227595] qcom,qpnp-pin qpnp-pin-ea502200: qpnp_pin_probe: gpio_chip registered between 426-447
<7>[    2.228472] gpiochip_find_base: found new base at 419
<6>[    2.228510] gpiochip_add: registered GPIOs 419 to 425 on device: pma8084-mpp
<7>[    2.228894] qcom,qpnp-pin qpnp-pin-ea502400: qpnp_pin_probe: gpio_chip registered between 419-425
<6>[    2.229215] [pcal6416a_gpio_probe]
<3>[    2.229260] [pcal6416a_parse_dt]: Unable to read pcal6416a,supply-name
<6>[    2.229317] [pcal6416a_parse_dt] 0x00040401
<6>[    2.229321] [pcal6416a_parse_dt] initialize reg 0xa0b0 0x0008 0x0221 0x0000
<6>[    2.229326] [pcal6416a_parse_dt]gpio_start=[300]ngpio=[16]reset-gpio=[145]
<6>[    2.229330] [pcal6416a_parse_dt] supply-name=[8084_s4]
<4>[    2.229368] 8084_s4: Failed to create debugfs directory
<6>[    2.229548] pcal6416a_power_ctrl: gpio expander 1.8V on is finished.
<3>[    2.229553] [pcal6416a gpio expander] pcal6416a_power_ctrl enable(1)
<6>[    2.229893] [pcal6416a_reset_chip]: gpio expander reset.
<6>[    2.229899] [pcal6416a_gpio_setup] GPIO Expander Init setting
<6>[    2.233672] [pcal6416a_gpio_probe]Expander setup success [0]
<6>[    2.233709] gpiochip_add: registered GPIOs 300 to 315 on device: gpio-expander
<6>[    2.233715] pcal6416a-gpio 17-0020: gpios 300..315 on a gpio-expander
<6>[    2.233890] mdss_mdp_probe: mdss_mdp_probe : ++
<6>[    2.233912] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5100000
<6>[    2.233933] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc50b2000
<3>[    2.234027] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
<3>[    2.234128] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
<6>[    2.234228] mdss_mdp_parse_dt_ad_cfg: SS is not using assertive display
<6>[    2.235123] mdss_mdp_probe: mdss_mdp_probe : --
<6>[    2.235504] mdss_dsi_driver_init ++
<6>[    2.235582] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    2.235604] mdss_dsi_get_panel_cfg:628: cfg:[0:mdss_dsi_samsung_1080p_cmd_fa2]
<6>[    2.235616] mdss_dsi_panel_init: Panel Name = samsung amoled 1080p command mode dsi S6E3FA2 panel
<6>[    2.235834] mdss_dsi_parse_panel_features:2743 Partial update enabled
<6>[    2.235841] mdss_dsi_parse_panel_features: ulps feature disabled
<6>[    2.235845] mdss_dsi_panel_init: Continuous splash enabled
<6>[    2.235932] mdss_samsung_create_sysfs: done!!
<6>[    2.235936] [mdss_dsi_panel_init] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
<3>[    2.235940] [mdnie lite] start!
<3>[    2.236035] [mdnie lite] end!
<6>[    2.236089] mdss_dsi_panel_init : --
<6>[    2.236093] dsi_panel_device_register : ++
<6>[    2.236128] mdss_dsi_regulator_init: vregn(3)
<6>[    2.236317] mdss_dsi_regulator_init: vdd3 - VREG_LVS4 (i/o) init..
<6>[    2.236325] dsi_panel_device_register:2046, broadcast (0)
<3>[    2.236353] dsi_panel_device_register:2131, Disp_en_gpio (439)
<3>[    2.236463] dsi_panel_device_register:2421, Disp_te_gpio (12)
<3>[    2.236584] dsi_panel_device_register:2470, Disp_rst_gpio (442)
<6>[    2.236774] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c50d2800 ctrl_size=1f8 phy_base=c50d4b00 phy_size=2b0
<6>[    2.236897] dsi_panel_device_register : splash enabled..panel_power_on (1)
<6>[    2.236902] mdss_dsi_panel_power_on: enable=1 vregn(3)
<6>[    2.237677] mdss_dsi_extra_power: ++ enable(1) ndx(0)
<6>[    2.237681] mdss_dsi_extra_power: lvs4(VDD3) enable.
<6>[    2.249518] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
<6>[    2.249653] mdss_hw_init: MDP Rev=10020001
<6>[    2.250399] dsi_panel_device_register: Panel data initialized
<6>[    2.250404] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized
<6>[    2.250417] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
<6>[    2.250438] mdss_dsi_get_panel_cfg:628: cfg:[0:mdss_dsi_samsung_1080p_cmd_fa2]
<3>[    2.250443] mdss_dsi_pref_prim_panel:can't find panel phandle
<3>[    2.250498] mdss_dsi_ctrl_probe: can't find panel node 0:mdss_dsi_samsung_1080p_cmd_fa2
<4>[    2.250601] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 32
<6>[    2.250841] mdss_dsi_driver_init --
<6>[    2.250846] mdss_dsi_status_init: DSI status check interval:5000
<6>[    2.251006] hdmi_tx_get_dt_data : drm_orkaround = true
<6>[    2.251019] hdmi_tx_init_resource: 'core_physical': start = 0xc50d8100, len=0x370
<6>[    2.251029] hdmi_tx_init_resource: 'phy_physical': start = 0xc50da500, len=0x7c
<6>[    2.251039] hdmi_tx_init_resource: 'qfprom_physical': start = 0xc50f8000, len=0x60f0
<6>[    2.251475] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
<6>[    2.252130] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
<6>[    2.252703] mdss_fb_parse_dt: split framebuffer left=0 right=0
<6>[    2.252709] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<3>[    2.252717] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=1f00000
<4>[    2.252771] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.252826] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
<3>[    2.252858] samsung_dsi_panel_event_handler : unknown event (1)
<6>[    2.252963] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
<6>[    2.252968] thrd_start =4 thrd_cont=4
<7>[    2.253028] Registered led device: lcd-backlight
<6>[    2.253042] mdss_dsi_panel_registered mds.mfd is ok!!
<6>[    2.253045] [mdss_dsi_panel_registered] CONFIG_MDNIE_LITE_TUNING ok ! mdnie_lite_tuning_init called!
<6>[    2.253050] mdss_dsi_panel_registered:2190, Panel registered succesfully
<6>[    2.253059] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.253080] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<4>[    2.253084] mdss_fb_alloc_fbmem_iommu: reserve size is smaller than framebuffer size
<3>[    2.253089] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=0
<4>[    2.253187] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.253230] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
<6>[    2.253276] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.253295] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<4>[    2.253299] mdss_fb_alloc_fbmem_iommu: reserve size is smaller than framebuffer size
<3>[    2.253304] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=0
<4>[    2.253358] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.253403] mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
<6>[    2.253428] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.253443] sii8240_init sii8240: check mhl
<6>[    2.253481] gpio: mhl_irq = 31
<6>[    2.253501] gpio: mhl_reset = 423
<6>[    2.253506] of_sii8240_parse_dt() gpio_mhl_reset_type = 3
<6>[    2.253519] gpio: mhl_scl = 11
<6>[    2.253532] gpio: mhl_sda = 10
<6>[    2.253538] swing_level = 0x25
<6>[    2.253542] barcode_emul = false
<6>[    2.253546] drm_workaround = true
<6>[    2.253684] of_sii8240_parse_dt: hdmi_pdev [0Xea4f3200] to pdata->pdev
<6>[    2.253715] sii8240_mhlv2dt 3-0039: success client_addr 0x39
<6>[    2.253886] sii8240_mhlv2dt 3-0039: sii8240 irq : 304
<6>[    2.253894] sii8240_mhlv2dt 3-0039: sii8240: registering input device
<6>[    2.253963] input: sii8240_rcp as /devices/virtual/input/input0
<6>[    2.254161] sii8240_mhlv2dt 3-0049: success client_addr 0x49
<6>[    2.254175] sii8240_mhlv2dt 3-004d: success client_addr 0x4D
<6>[    2.254190] sii8240_mhlv2dt 3-0059: success client_addr 0x59
<6>[    2.254203] sii8240_mhlv2dt 3-0064: success client_addr 0x64
<3>[    2.266479] sps: BAM device 0xf9944000 is not registered yet.
<6>[    2.266590] sps:BAM 0xf9944000 is registered.
<6>[    2.268523] f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is a MSM HS UART
<3>[    2.269911] sps: BAM device 0xf9904000 is not registered yet.
<6>[    2.269973] sps:BAM 0xf9904000 is registered.
<6>[    2.271495] f991d000.uart: ttyHS3 at MMIO 0xf991d000 (irq = 139) is a MSM HS UART
<6>[    2.273000] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
<6>[    2.273074] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
<6>[    2.275293] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
<6>[    2.275373] f995d000.serial: ttyHSL1 at MMIO 0xf995d000 (irq = 145) is a MSM
<6>[    2.277909] msm_serial_hsl_init: driver initialized
<6>[    2.279978] diagchar initialized now
<3>[    2.280434] kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
<4>[    2.281077] kgsl bus ib [0] = 2456000000
<4>[    2.281081] kgsl bus ib [1] = 3680000000
<4>[    2.281084] kgsl bus ib [2] = 4912000000
<4>[    2.281088] kgsl bus ib [3] = 7464000000
<4>[    2.281091] kgsl bus index is 3 for pwrlevel 0
<4>[    2.281094] kgsl bus index is 2 for pwrlevel 1
<4>[    2.281098] kgsl bus index is 2 for pwrlevel 2
<4>[    2.281101] kgsl bus index is 1 for pwrlevel 3
<4>[    2.281104] kgsl bus index is 0 for pwrlevel 4
<4>[    2.281107] kgsl bus index is 0 for pwrlevel 5
<6>[    2.281602] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<4>[    2.282078] kgsl: num bus is 4
<6>[    2.282774] GPU_SYSFS ----------- gpu_sysfs_init -- 224
<6>[    2.283010] GPU_SYSFS ----------- gpu_sysfs_probe -- 158
<6>[    2.283015] GPU_SYSFS ----------- gpu_sysfs_device_init -- 144
<6>[    2.283019] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 29
<6>[    2.283040] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 115
<6>[    2.283043] GPU_SYSFS ----------- gpu_sysfs_probe -- 178
<6>[    2.283056] GPU_SYSFS ----------- gpu_sysfs_init -- 250
<6>[    2.285282] brd: module loaded
<6>[    2.286429] loop: module loaded
<4>[    2.286775] QSEECOM: qseecom_probe: support_bus_scaling=0x1
<4>[    2.286781] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
<4>[    2.286786] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
<4>[    2.286791] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
<4>[    2.286795] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
<4>[    2.286824] QSEECOM: qseecom_probe: secure app region addr=0x7300000 size=0xd00000
<6>[    2.287268] init tzic
<6>[    2.287407] irda_ice40_init
<6>[    2.287439] irda_ice40_probe probe!
<6>[    2.287567] irda_ice40_config
<6>[    2.287571] g_pdata->fw_ver  = 2
<6>[    2.287574] g_pdata->rst_n   = 303
<6>[    2.287577] g_pdata->spi_clk = 108
<6>[    2.287580] g_pdata->spi_si  = 109
<6>[    2.287582] g_pdata->irda_irq= 101
<6>[    2.287586] g_pdata->cresetb = 436
<4>[    2.287591] irda_ice40_config: warning check pin num[-22]
<4>[    2.287618] irda_ice40_config: warning check pin num[-22]
<6>[    2.287622] pcal6416a_gpio_request
<6>[    2.287627] pcal6416a_gpio_direction_output(off=[3], val=[0])
<6>[    2.288536] irda_ice40_probe complete[1433]
<4>[    2.288607] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[    2.288611] i2c-core: driver [tabla-i2c-core] using legacy resume method
<4>[    2.288674] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
<4>[    2.288678] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
<6>[    2.288868] SCSI Media Changer driver v0.25
<4>[    2.289103] spi_qsd f9966000.spi: msm_spi_dt_to_pdata pdata->use_bam: 1
<6>[    2.289353] sps:BAM 0xf9944000 (va:0xc5140000) enabled: ver:0x13, number of pipes:24
<6>[    2.292757] msm_spi_dt_to_pdata: disable bam for BLSP5 tzspi
<4>[    2.292762] spi_qsd f9927000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
<4>[    2.292768] spi_qsd f9927000.spi: using default bus_num -1
<4>[    2.295931] spi_qsd f9967000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
<4>[    2.295937] spi_qsd f9967000.spi: using default bus_num -1
<6>[    2.298766] ice40_fpga_firmware_update_klte[436] fw_ver 2
<6>[    2.298776] ice40_fpga_fimrware_update_start
<6>[    2.298780] ice40_clock_en:103 - on : 1
<6>[    2.299314] tun: Universal TUN/TAP device driver, 1.6
<6>[    2.299318] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    2.299352] rmnet_init: BAM devices[9]
<6>[    2.302246] PPP generic driver version 2.4.2
<6>[    2.302293] PPP BSD Compression module registered
<6>[    2.302298] PPP Deflate Compression module registered
<6>[    2.302415] FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
<6>[    2.302475] PPP MPPE Compression module registered
<6>[    2.302481] NET: Registered protocol family 24
<6>[    2.302486] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    2.302491] CSLIP: code copyright 1989 Regents of the University of California.
<7>[    2.302496] function asix_init line 3883
<6>[    2.302517] usbcore: registered new interface driver asix
<6>[    2.302536] usbcore: registered new interface driver cdc_ether
<6>[    2.302552] usbcore: registered new interface driver net1080
<6>[    2.302569] usbcore: registered new interface driver cdc_subset
<6>[    2.302584] usbcore: registered new interface driver zaurus
<6>[    2.308730] usbcore: registered new interface driver cdc_ncm
<6>[    2.310105] Get USB 3.0 redriver GPIO address
<3>[    2.310196] /soc/qcom,ssusb@f9200000: could not find phandle
<6>[    2.562933] dwc3-msm: sec_otg_init is called.
<6>[    2.562938] sec_otg_init: register notifier
<3>[    2.562943] get_vbus_detect_gpio, cannot get vbus-detect-gpio, ret=-22
<6>[    2.563976] usbcore: registered new interface driver cdc_acm
<6>[    2.563981] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    2.563985] Initializing USB Mass Storage driver...
<6>[    2.564000] usbcore: registered new interface driver usb-storage
<6>[    2.564004] USB Mass Storage support registered.
<6>[    2.564018] usbcore: registered new interface driver ums-alauda
<6>[    2.564032] usbcore: registered new interface driver ums-cypress
<6>[    2.564045] usbcore: registered new interface driver ums-datafab
<6>[    2.564059] usbcore: registered new interface driver ums_eneub6250
<6>[    2.564076] usbcore: registered new interface driver ums-freecom
<6>[    2.564090] usbcore: registered new interface driver ums-isd200
<6>[    2.564104] usbcore: registered new interface driver ums-jumpshot
<6>[    2.564118] usbcore: registered new interface driver ums-karma
<6>[    2.564132] usbcore: registered new interface driver ums-onetouch
<6>[    2.564146] usbcore: registered new interface driver ums-sddr09
<6>[    2.564160] usbcore: registered new interface driver ums-sddr55
<6>[    2.564174] usbcore: registered new interface driver ums-usbat
<6>[    2.564209] usbcore: registered new interface driver usbserial
<6>[    2.564214] usbserial: USB Serial Driver core
<6>[    2.564232] usbcore: registered new interface driver pl2303
<6>[    2.564248] USB Serial support registered for pl2303
<6>[    2.564404] host_notifier host-notifier.44: notifier_probe
<7>[    2.564865] usb: android_bind disconnect
<6>[    2.564892] mbim_init: initialize 1 instances
<6>[    2.564933] mbim_init: Initialized 1 ports
<6>[    2.565730] rndis_qc_init: initialize rndis QC instance
<6>[    2.565914]  gadget: Mass Storage Function, version: 2009/09/11
<6>[    2.565920]  gadget: Number of LUNs=1
<6>[    2.565925]  lun0: LUN: removable CD-ROM file: (no medium)
<3>[    2.566011] conn_gadget_function_init(#) call conn_gadget_setup
<6>[    2.566069] conn_gadget_setup
<7>[    2.566189] usb: composite_bind idVendor=0x0, idProduct=0x0
<7>[    2.566192] usb: composite_bind bcdDevice=0x0
<7>[    2.566196] usb: composite_bind composite_manufacturer=
<6>[    2.566203]  gadget: android_usb ready
<6>[    2.567303] mousedev: PS/2 mouse device common for all mice
<3>[    2.567464] cypress_touchkey_probe: start!
<6>[    2.567771] cypress_touchkey 21-0020: cypress_power_onoff: power on
<4>[    2.567786] max77826_ldo15: Failed to create debugfs directory
<6>[    2.567794] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    2.568189] max77826_ldo_set_voltage: id=14, reg=0x2e, mask=0x7f, val=0x64, new=0x28
<6>[    2.568967] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.569358] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.569748] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.576877] FPGA firmware update success
<6>[    2.579747] ice40_clock_en:103 - on : 0
<6>[    2.729697] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<6>[    2.769296] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    2.769369] input: sec_touchkey as /devices/i2c.94/i2c-21/21-0020/input/input1
<6>[    2.769411] cypress_touchkey 21-0020: gpio_to_irq IRQ 627
<6>[    2.769581] cypress_touchkey 21-0020: TKEY MODULE 0x06! system_rev:e
<6>[    2.769587] tkey/semco_cypress_tkey.fw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
<6>[    2.769593] cypress_touchkey 21-0020: the fw 0x1d is loaded (size=8192) hdr_len=16
<6>[    2.769599] cypress_touchkey 21-0020: tkey_flash_fw : part fw ver:0x1d, phone fw ver:0x1d, header ver:0x1
<6>[    2.769605] cypress_touchkey 21-0020: tkey_flash_fw : IC aleady have latest firmware (fw:0x1d module:0x6)
<6>[    2.769620] cypress_touchkey 21-0020: tkey_fw_update_work : touchkey_update Start!!
<3>[    2.769627] [TKEY] start..
<6>[    2.769685] cypress_touchkey 21-0020: cypress_touchkey_probe: done
<6>[    2.769689] cypress_touchkey 21-0020: cypress_power_onoff: power off
<6>[    2.769694] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.769725] cypress_touchkey_init: init done 0
<6>[    2.769859] usbcore: registered new interface driver xpad
<3>[    2.769880] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_probe start.
<6>[    2.770028] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply0: max77826_ldo13
<6>[    2.770034] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply1: 8084_lvs2
<6>[    2.770042] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: Unable to read synaptics,sub-project
<3>[    2.770047] synaptics_parse_dt: OCTA ID = 1
<6>[    2.770074] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.770107] synaptics_parse_dt: power= -22, tsp_int= 433, X= 1079, Y= 1919, project= K, config[0][0][129][0], tablet = 0 reset= -22 surface-only= 0
<6>[    2.770327] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.771081] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.771431] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.772042] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: max77826_ldo13 is enabled[OK]
<6>[    2.773682] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: 8084_lvs2 is enabled[OK]
<6>[    2.783082] cypress_touchkey 21-0020: cypress_power_onoff: power on
<6>[    2.783088] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.783439] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.783789] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.799756] [TKEY] re run check.
<6>[    2.929195] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 found (page 0): INT_SRC[21] BASE_ADDRS[00,08,00,1f]
<6>[    2.929648] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f34_read_version: [IC] test_result[0][date, revision, version] [04/10, 0xA3, 0x55], Bootlader : vV646
<6>[    2.929926] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F01 found (page 0): INT_SRC[01] BASE_ADDRS[04,0C,1E,25]
<6>[    2.930083] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
<6>[    2.930529] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 found (page 0): INT_SRC[01] BASE_ADDRS[06,11,00,44]
<6>[    2.931723] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
<6>[    2.932312] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919
<6>[    2.932834] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: 12 num_Rx:28 num_Tx:16, node:448, threshold:30, gloved sensitivity:e3
<6>[    2.933210] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: jitter filter strenth = 40, glove jitter filter strenght = 200
<6>[    2.933875] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F54 found (page 1): INT_SRC[01] BASE_ADDRS[00,0D,38,39]
<6>[    2.934924] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F55 found (page 3): INT_SRC[01] BASE_ADDRS[00,00,04,05]
<6>[    2.935587] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 found (page 4): INT_SRC[61] BASE_ADDRS[00,18,00,57]
<3>[    2.935869] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: f51 query feature feature1:55, feature2:1A
<6>[    2.936111] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: edge_swipe: 040B, detection_flag2 : 0409
<6>[    2.936117] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: sidekey_threshold addr : 0447, stylus_enable_addr : 0455
<6>[    2.938310] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
<6>[    2.939590] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: [s5100 A3 F] package_id is 12597, package_rev is 12336
<6>[    2.939798] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
<6>[    2.939804] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
<6>[    2.939810] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[61] NUM_INT_REG[00] INT_MASK[20]
<6>[    2.939815] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
<6>[    2.940274] input: sec_touchscreen as /devices/f9924000.i2c/i2c-2/2-0020/input/input2
<6>[    2.940284] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_input_open
<3>[    2.940291] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_start_device already power on
<6>[    2.946773] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID] [0x0000 0x0000, s5100 A3 F]
<6>[    2.947003] synaptics_rmi4_i2c 2-0020: fwu_read_f34_queries: F34 Query : ID: V646
<3>[    2.953333] synaptics_rmi4_i2c 2-0020: rmidb_scan_pdt: Failed to find FDB
<3>[    2.960455] [TKEY] do not need fw update.
<6>[    2.960512] cypress_touchkey 21-0020: cypress_power_onoff: power off
<6>[    2.960517] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.960876] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.967771] cypress_touchkey 21-0020: cypress_power_onoff: power on
<6>[    2.967777] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.968137] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.968496] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.992094] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_s5100_k_a3.fw
<6>[    2.992103] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: [FW size, version] [105536, 0xA355/0xA355(BIN/IC), prog bit[0]
<6>[    2.992110] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: pr_base:0x74, BL ver: 0x10, IC/FW pr_number : 1642224 / 1642224
<6>[    2.992115] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: Do not need to update
<6>[    2.992925] using rtc device, qpnp_rtc, for alarms
<6>[    2.992939] qcom,qpnp-rtc qpnp-rtc-ea502a00: rtc core: registered qpnp_rtc as rtc0
<3>[    2.993009] qcom,qpnp-rtc qpnp-rtc-ea502a00: Probe success !!
<6>[    2.993129] i2c /dev entries driver
<7>[    2.994204] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
<7>[    2.994209] msm_vidc: 1: no elements in frequency table
<7>[    2.994213] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
<7>[    2.994267] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
<7>[    2.994274] msm_vidc: 1: Q6 hfi device probe called
<7>[    2.994390] msm_vidc: 1: debugfs_create_file: fail
<4>[    2.994723] msm_probe : Succeed!
<3>[    2.995119] cam_dummy_init_module:182
<3>[    2.995193] cam_dummy_platform_probe:87
<4>[    2.995576] cam_dummy_init_module: succeed
<4>[    2.996295] msm_cci_probe : Succeed!
<6>[    2.999994] msm_camera_power_up:1427 rear sensor: L, core_ver: 0 (0x30)
<3>[    3.000000] msm_camera_request_gpio_table:545 invalid gpio_tbl   (null) / size 0
<6>[    3.000100] msm_camera_config_single_vreg enable max77826_ldo8
<6>[    3.000144] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    3.000498] max77826_ldo_set_voltage: id=7, reg=0x27, mask=0x7f, val=0x28, new=0x28
<6>[    3.001110] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    3.001460] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<3>[    3.004091] error : not power up cci
<6>[    3.004211] msm_eeprom_match_id: read 0xF815, check Fidelix 32Mb:0xF815, Winbond 32Mb:0xEF15, Macronix 32Mb:0xC236, GigaDevice 32Mb:0xC815
<6>[    3.029710] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<3>[    3.033306] msm_eeprom_match_crc: map version = 5
<6>[    3.033411] msm_eeprom_verify_sum: checksum pass 0xcdec24
<6>[    3.033466] msm_eeprom_verify_sum: checksum pass 0x55dc94b0
<6>[    3.033469] msm_eeprom_verify_sum: checksum pass 0x7d2b9389
<6>[    3.033488] msm_eeprom_verify_sum: checksum pass 0xe54f27cc
<6>[    3.033494] msm_eeprom_verify_sum: checksum pass 0x753bb7f2
<6>[    3.033549] msm_eeprom_verify_sum: checksum pass 0x46d16187
<6>[    3.033567] msm_eeprom_verify_sum: checksum pass 0x8ff138c
<6>[    3.033739] msm_eeprom_verify_sum: checksum pass 0x250d165a
<3>[    3.033743] All CRC values are matched.
<6>[    3.033797] msm_camera_config_single_vreg disable max77826_ldo8
<6>[    3.033803] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    3.034417] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    3.034767] max77826_ldo_set_voltage: id=7, reg=0x27, mask=0x7f, val=0x28, new=0x28
<3>[    3.037424] msm_camera_request_gpio_table:545 invalid gpio_tbl   (null) / size 0
<4>[    3.037565] msm_eeprom_spi_setup success result=0 supported=1ff X
<4>[    3.037721] MSM-SENSOR-DRIVER msm_sensor_driver_init:640 msm_sensor_driver_init : Enter
<3>[    3.038190] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0
<3>[    3.038247] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0
<4>[    3.038903] MSM-SENSOR-DRIVER msm_sensor_driver_parse:617 g_sctrl[0] e9a75200
<4>[    3.038906]
<4>[    3.039190] MSM-SENSOR-DRIVER msm_sensor_driver_parse:617 g_sctrl[2] e9a75400
<4>[    3.039192]
<4>[    3.039205] MSM-SENSOR-DRIVER msm_sensor_driver_init:644 probe success
<3>[    3.039584] [syscamera][camera_dcdc_probe::136]
<3>[    3.039640] [syscamera][ncp6335b_parse_dt::126]
<3>[    3.069300] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
<3>[    3.078735] qup_i2c f9923000.i2c: GPIO pins have no active setting
<3>[    3.078801] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.078901] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.078955] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.079054] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.079121] [syscamera][ncp6335b_read::67]Read Error [-110]
<3>[    3.079175] [syscamera][ncp6335b_read::68]NCP6335B PID[ffffff92]
<6>[    3.109295] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    3.109300] cypress_touchkey 21-0020: tkey_fw_update_work : touchkey_update pass!!
<3>[    3.118719] qup_i2c f9923000.i2c: GPIO pins have no active setting
<3>[    3.118830] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.118885] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.118984] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.119038] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.119104] [syscamera][ncp6335b_read::72]Read Error [-110]
<3>[    3.119204] [syscamera][ncp6335b_read::73]NCP6335B [0x10 Read :: ffffff92]
<4>[    3.158720] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.158766] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.158780] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.158881] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.158934] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.159034] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.159099] [syscamera][ncp6335b_read::77]Read Error [-110]
<3>[    3.159198] [syscamera][ncp6335b_read::78]NCP6335B [0x11 Read :: ffffff92]
<4>[    3.198720] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.198764] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.198779] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.198877] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.198930] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.199027] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.199093] [syscamera][ncp6335b_read::82]Read Error [-110]
<3>[    3.199191] [syscamera][ncp6335b_read::83]NCP6335B [0x14 Read :: ffffff92]
<3>[    3.199245] [syscamera][camera_dcdc_probe::173][pid::-110]
<4>[    3.238720] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.238814] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.238829] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.238883] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.238980] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.239033] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.239144] [syscamera][ncp6335b_write::43]Write Error [-110]
<4>[    3.278719] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.278764] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.278778] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.278878] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.278932] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.278986] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.279096] [syscamera][ncp6335b_write::47]Write Error [-110]
<4>[    3.318719] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.318764] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.318779] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.318878] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.318931] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.319029] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.319094] [syscamera][ncp6335b_write::51]Write Error [-110]
<3>[    3.319234] [syscamera][ncp6335b_init_module::214][rc::0]
<6>[    3.319354] [syscamera][fan53555_init_module::322][rc::0]
<3>[    3.320270] __msm_jpeg_init:908] Jpeg Device id 0
<3>[    3.320457] __msm_jpeg_init:908] Jpeg Device id 1
<3>[    3.320641] __msm_jpeg_init:908] Jpeg Device id 2
<6>[    3.335958] lirc_dev: IR Remote Control driver registered, major 230
<6>[    3.336015] IR NEC protocol handler initialized
<6>[    3.336019] IR RC5(x) protocol handler initialized
<6>[    3.336022] IR RC6 protocol handler initialized
<6>[    3.336026] IR JVC protocol handler initialized
<6>[    3.336029] IR Sony protocol handler initialized
<6>[    3.336033] IR RC5 (streamzap) protocol handler initialized
<6>[    3.336037] IR SANYO protocol handler initialized
<6>[    3.336040] IR MCE Keyboard/mouse protocol handler initialized
<6>[    3.336044] IR LIRC bridge handler initialized
<6>[    3.336047] gspca_main: v2.14.0 registered
<6>[    3.336096] usbcore: registered new interface driver uvcvideo
<6>[    3.336100] USB Video Class driver (1.1.1)
<6>[    3.372711] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[    3.372723] Bluetooth: BlueSleep Mode Driver Ver 1.1
<3>[    3.372899] bluesleep probe
<3>[    3.372901]  [BT]
<6>[    3.373492] cpuidle: using governor ladder
<6>[    3.373496] cpuidle: using governor menu
<6>[    3.373513] sdhci: Secure Digital Host Controller Interface driver
<6>[    3.373517] sdhci: Copyright(c) Pierre Ossman
<6>[    3.373868] sdhci-pltfm: SDHCI platform and OF driver helper
<3>[    3.374081] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.375699] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
<3>[    3.381181] sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
<3>[    3.381448] mmc0: id 1
<6>[    3.382583] mmc0: no vmmc regulator found
<6>[    3.384671] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
<3>[    3.384750] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
<3>[    3.384808] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.384914] sdhci_msm_populate_pdata: vendor_type=4
<3>[    3.391929] mmc1: id 2
<4>[    3.391984]  Enter brcm_wifi_status_register
<6>[    3.391988] brcm_wifi_status_register: callback is c06f73b0, devid is e9b0a440
<3>[    3.391993] mmc1: id 2, register_status_notify=c0176614, host=e9b0a440, rescan_disable=0
<6>[    3.393110] mmc1: no vmmc regulator found
<6>[    3.395188] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
<3>[    3.395681] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.403853] mmc2: id 3
<7>[    3.403907] sdhci_msm_probe : Change sysfs Card Detect
<6>[    3.404954] mmc2: no vmmc regulator found
<6>[    3.407037] mmc2: SDHCI controller on msm_sdcc.3 [msm_sdcc.3] using ADMA
<3>[    3.407304] i2c i2c-17: an30259a_probe
<4>[    3.407360] an30259a_parse_dt warning default dt parse[-22]
<4>[    3.407364] an30259a_parse_dt warning lowpower dt parse[-22]
<4>[    3.407368] an30259a_parse_dt warning offset dt parse[-22]
<6>[    3.407372] an30259a_parse_dt LED default 0x28, lowpower 0x5
<6>[    3.407375] an30259a_parse_dt LED R_off[0x0] G_off[0x0] B_off[0x0]
<7>[    3.409490] Registered led device: led_r
<7>[    3.411841] Registered led device: led_g
<7>[    3.414193] Registered led device: led_b
<3>[    3.414688] [zealottt] max77804k_led_probe
<7>[    3.414774] Registered led device: leds-sec1
<7>[    3.421987] Registered led device: torch-sec1
<4>[    3.429422] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
<4>[    3.429427] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[    3.429443] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.429448] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc53c0000
<4>[    3.429452] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.429456] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<6>[    3.429634] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
<6>[    3.429640] qce qcedev.0: CE device = 0x0
<6>[    3.429642] , IO base, CE = 0xc53c0000
<6>[    3.429644] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
<6>[    3.429645] IO base BAM = 0x0
<6>[    3.429647] BAM IRQ 268
<6>[    3.429648] Engines Availability = 0x1010853
<6>[    3.429674] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg7fff004
<6>[    3.429683] sps:BAM 0xfd444000 is registered.
<6>[    3.431851] sps:BAM 0xfd444000 (va:0xc51e0000) enabled: ver:0x20, number of pipes:8
<3>[    3.431857] sps:BAM 0xfd444000 pipe 3 sharing violation
<3>[    3.431957] sps:Failed to connect BAM 0xe9b7fe00 pipe 3
<3>[    3.432013] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xe9962a00, rc = -1
<3>[    3.434179] sps:De-init client in connected state: 0x1535053
<4>[    3.434315] qce: probe of qcedev.0 failed with error -1
<4>[    3.436747] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
<4>[    3.436752] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[    3.436766] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.436770] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5540000
<4>[    3.436774] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.436778] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<4>[    3.438944] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
<3>[    3.438955] QCE50: __qce_init_clk: Unable to get CE core clk
<3>[    3.439010] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
<4>[    3.439128] qcrypto: probe of fd440000.qcom,qcrypto failed with error -2
<4>[    3.439145] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
<4>[    3.439150] QCE50: __qce_get_device_tree_data: ce-device =0x1
<4>[    3.439163] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.439167] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5580000
<4>[    3.439171] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.439175] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<4>[    3.441340] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
<3>[    3.441351] QCE50: __qce_init_clk: Unable to get CE core clk
<3>[    3.441405] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
<4>[    3.441523] qcrypto: probe of fd440000.qcom,qcrypto1 failed with error -2
<6>[    3.446397] Successfully registered hid_synaptics_driver
<6>[    3.446430] usbcore: registered new interface driver usbhid
<6>[    3.446435] usbhid: USB HID core driver
<6>[    3.447199] ashmem: initialized
<6>[    3.447229] logger: created 2048K log 'log_main'
<6>[    3.447259] logger: created 512K log 'log_events'
<6>[    3.447288] logger: created 2048K log 'log_radio'
<6>[    3.447318] logger: created 512K log 'log_system'
<6>[    3.447323] sec_getlog_supply_loggerinfo: 0xc1457b54 0xc1257b54 0xc11d7b54 0xc1157b54
<6>[    3.448444] sps:BAM 0xf9304000 is registered.
<6>[    3.448459] sps:BAM 0xf9a44000 is registered.
<3>[    3.448465] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
<6>[    3.448760] qcom,qpnp-power-on qpnp-power-on-ea501800: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
<6>[    3.448778] qcom,qpnp-power-on qpnp-power-on-ea501800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
<6>[    3.448925] input: qpnp_pon as /devices/virtual/input/input3
<6>[    3.449517] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
<6>[    3.449997] PMIC@SID0: PMA8084 v2.1 options: 0, 2, 2, 2
<6>[    3.450321] mckernelapi : Mobicore API module initialized!
<6>[    3.450335] MobiCore mcd: MobiCore Driver, Build: Tue May 24 00:04:12 2016
<6>[    3.450340] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
<6>[    3.450460] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
<6>[    3.450563] fuelgauge_parse_dt reading fg_irq = 446
<6>[    3.450681] fuelgauge_parse_dt reading bat_int_gpio = 425
<6>[    3.450688] fuelgauge_parse_dt: fg_irq: 446, calculation_type: 0x17, fuel_alert_soc: 2,
<6>[    3.450690] repeated_fuelalert: 0
<6>[    3.450694] board_fuelgauge_init : assign battery data
<6>[    3.450701] board_fuelgauge_init: RCOMP0: 0x5d, RCOMP_charging: 0x5d, temp_cohot: -175, temp_cocold: -5825, is_using_model_data: 1, type_str: SDI, capacity_max: 990, capacity_max_margin: 50, capacity_min: -7,
<6>[    3.451402] sec-fuelgauge 19-0036: MAX17048 Fuel-Gauge Ver 0x0012
<6>[    3.452790] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    3.453487] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    3.453492] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 999 is used for capacity_max
<3>[    3.454244] max17048_get_current: Fail to get psy (sec-charger)
<3>[    3.454347] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[    3.454403] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.455965] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    3.456727] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    3.456733] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    3.456742] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<3>[    3.457634] max17048_get_current: Fail to get psy (sec-charger)
<3>[    3.457692] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[    3.457793] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.459381] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    3.460139] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    3.460145] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    3.460153] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<6>[    3.461559] sec-fuelgauge 19-0036: sec_fuelgauge_probe: fg_irq = 630
<6>[    3.461686] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
<6>[    3.461723] func:max77804k_charger_init
<6>[    3.461899] max77804k_charger_probe: MAX77804K Charger driver probe
<6>[    3.462041] sec_charger_parse_dt use bat irq -22
<3>[    3.462047] max77804k-charger max77804k-charger: max77804k_charger_probe : Failed to get charger int
<6>[    3.463036] max77804k_irq_thread: interrupt source(0x01)
<6>[    3.463385] max77804k_irq_thread: charger interrupt(0x40)
<6>[    3.467640] max77804k_charger_initialize: battery cv voltage 0xdf
<6>[    3.467990] max77804k_charger_probe: device found: ver.0x4
<6>[    3.468443] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    3.469158] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xff)
<3>[    3.469164] max77804k_get_health_state: Fail to get psy (battery)
<3>[    3.469609] max77804k_get_vbus_state: Fail to get psy (battery)
<6>[    3.470354] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    3.470358] max77804k_get_health_state: unmask wcin int
<6>[    3.471313] sec_chg_get_property: reg_data(93)
<6>[    3.471674] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    3.472053] sec_chg_get_property: reg_data(93)
<6>[    3.472415] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    3.473191] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xdf)
<3>[    3.473197] max77804k_get_health_state: Fail to get psy (battery)
<3>[    3.473699] max77804k_get_vbus_state: Fail to get psy (battery)
<6>[    3.474457] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    3.474822] sec_chg_get_property: reg_data(93)
<6>[    3.475175] max77804k_get_input_current: CHG_CNFG_09(0x12)
<3>[    3.478914] [VIB] ++ max77804k_haptic_probe
<3>[    3.479014] [VIB] -- max77804k_haptic_probe
<6>[    3.479104] [SSP] ssp_probe
<3>[    3.479107] [SSP] probe exit : lpm 0, recovery 1
<6>[    3.479188] max86900_probe - start
<4>[    3.479223] max77826_ldo4: Failed to create debugfs directory
<6>[    3.479227] max86900_regulator_onoff - onoff = 1
<6>[    3.479234] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    3.479586] max77826_ldo_set_voltage: id=3, reg=0x23, mask=0x7f, val=0x28, new=0x28
<6>[    3.480199] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.480550] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.485275] mmc0: BKOPS_EN bit = 0
<4>[    3.518726] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.518774] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.518781] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.518884] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.518940] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.519044] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.522973] mmc0: new HS400 MMC card at address 0001
<6>[    3.523154] [mmc_blk_probe]mmcblk0: mmc0:0001 MAG2GC 14.6 GiB , card->type:0
<6>[    3.523253] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 512 KiB
<6>[    3.525532]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
<4>[    3.578739] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.578787] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.578794] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.578902] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.578959] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.579064] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.619676] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<4>[    3.638724] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.638776] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.638788] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.638848] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.638951] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.639007] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.659332] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    3.659402] cypress_touchkey 21-0020: cypress_touchkey_interrupt: not real interrupt (1).
<4>[    3.698720] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.698764] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.698779] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.698835] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.698934] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.698988] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.758719] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.758763] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.758778] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.758879] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.758934] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.758988] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.778704] max86900_read_reg -read transfer error
<4>[    3.818718] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.818763] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.818777] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.818833] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.818933] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.818987] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.878718] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.878762] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.878777] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.878832] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.878931] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.878986] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.938719] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.938764] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.938778] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.938878] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.938932] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.939032] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.942715] mmc2: new ultra high speed SDR50 SDXC card at address 59b4
<6>[    3.942881] [mmc_blk_probe]mmcblk1: mmc2:59b4 NCard 59.8 GiB , card->type:1
<6>[    3.944518]  mmcblk1: p1
<4>[    3.998719] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.998763] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.998778] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.998880] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.998934] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.999033] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    4.058717] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    4.058762] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    4.058778] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    4.058833] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    4.058932] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    4.058986] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    4.078703] max86900_read_reg -read transfer error
<3>[    4.078758] max86900_probe WHOAMI read fail
<4>[    4.078820] max77826_ldo4: Failed to create debugfs directory
<6>[    4.078824] max86900_regulator_onoff - onoff = 0
<6>[    4.078829] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<3>[    4.079451] max86900_probe failed
<6>[    4.079599] vfsspi_init
<6>[    4.079632] vfsspi_probe
<6>[    4.079660] vfsspi_parse_dt: sleepPin=57
<6>[    4.079674] vfsspi_parse_dt: drdyPin=64
<3>[    4.079678] vfsspi_parse_dt: fail to get ocp_pin
<6>[    4.079742] vfsspi_parse_dt: ocp_en=63
<6>[    4.079755] vfsspi_parse_dt: ldo_pin=130
<3>[    4.079759] vfsspi_parse_dt: not set ldo2 in dts
<6>[    4.079859] vfsspi_parse_dt: ldocontrol=1
<6>[    4.079867] vfsspi_parse_dt: orient=1
<6>[    4.079871] vfsspi_platformInit
<6>[    4.079877] vfsspi_platformInit ocp off
<6>[    4.079884] vfsspi_platformInit ldo off
<6>[    4.079994] vfsspi_disable_irq
<6>[    4.080000] vfsspi_platformInit drdy value =1
<6>[    4.080002] vfsspi_platformInit sleep value =0
<6>[    4.080003] vfsspi_platformInit ldo en value =0
<6>[    4.080007] vfsspi_platformInit vfsspi_platofrminit, status=0
<6>[    4.084163] vfsspi_regulator_onoff: on ocp_en: enable
<6>[    4.090285] vfsspi_hardReset
<6>[    4.118906] ValiditySensor: spi_sync returned 0
<6>[    4.118911] vfsspi_probe sensor type is RAPTOR
<6>[    4.118919] vfsspi_regulator_onoff: off ocp_en: enable
<6>[    4.119008] vfsspi_probe success...
<6>[    4.119023] vfsspi_init init is successful
<6>[    4.119035] func:max77804k_muic_init
<6>[    4.119254] func:max77804k_muic_probe
<6>[    4.119375] max77804k-muic max77804k-muic: adc:320 chgtype:324
<6>[    4.119394] dev_set_drvdata:max77804k_muic_probe
<6>[    4.119399] max77804k-muic max77804k-muic: func:max77804k_muic_set_adcdbset value:2
<6>[    4.119404] max77804k-muic max77804k-muic: max77804k_muic_set_adcdbset: ADCDBSET(0x02)
<6>[    4.120708] max77804k_muic_probe: ADCMODE(0x0)
<6>[    4.120974] max77804k_muic_probe: CDETCTRL1(0x0d)
<6>[    4.121003] max77804k-muic max77804k-muic: func:max77804k_muic_irq_init
<6>[    4.122155] max77804k_irq_thread: interrupt source(0x08)
<6>[    4.122651] max77804k_irq_thread: muic interrupt(0x00, 0x13, 0x00)
<6>[    4.132160] max77804k-muic max77804k-muic: adc:320 chgtype:324 vbvolt:328
<6>[    4.132511] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=1, val=0
<6>[    4.132862] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=2, val=0
<6>[    4.133213] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=3, val=0
<6>[    4.133563] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=4, val=3f
<6>[    4.133914] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=5, val=41
<6>[    4.134264] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=6, val=40
<6>[    4.134614] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=7, val=1
<6>[    4.134965] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=8, val=11
<6>[    4.134970] max77804k-muic max77804k-muic: set path to (0)
<6>[    4.134974] max77804k_muic_set_safeout: MUIC safeout path=0
<6>[    4.137000] max77804k_muic_probe: uart en bit : 0
<6>[    4.137004] max77804k_muic_probe: MUIC path is OPEN from now.
<6>[    4.137357] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[    4.137362] notifier sec_otg_register_booster 169: register max77804k
<6>[    4.137467] usbcore: registered new interface driver snd-usb-audio
<6>[    4.138815] (NULL device *): es705_bus_init(): registered as SLIMBus
<6>[    4.144902] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
<6>[    4.145387] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
<6>[    4.146021] platform qcom,msm-voip-dsp.52: Driver msm-voip-dsp requests probe deferral
<6>[    4.146339] platform qcom,msm-pcm-voice.53: Driver msm-pcm-voice requests probe deferral
<6>[    4.148302] ocmem: Notifier registered for 5
<6>[    4.148780] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.148840] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.149764] Mirror/redirect action on
<6>[    4.149770] u32 classifier
<6>[    4.149773]     Actions configured
<6>[    4.149780] Netfilter messages via NETLINK v0.30.
<6>[    4.149811] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    4.150004] ctnetlink v0.93: registering with nfnetlink.
<6>[    4.150024] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    4.150029] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    4.150142] xt_time: kernel timezone is -0000
<6>[    4.150152] 939-23012-001-quicksec-vpnclient-for-android-3.3.1-2811-b2567729009d-2015-01-30_13-36-53
<6>[    4.150156] vpnclient kernel spd loaded.
<6>[    4.150304] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.150429] arp_tables: (C) 2002 David S. Miller
<6>[    4.150458] TCP: bic registered
<6>[    4.150462] TCP: cubic registered
<6>[    4.150466] TCP: westwood registered
<6>[    4.150469] TCP: htcp registered
<6>[    4.150473] Initializing XFRM netlink socket
<6>[    4.150639] NET: Registered protocol family 10
<6>[    4.151755] Mobile IPv6
<6>[    4.151771] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.151851] IPv6 over IPv4 tunneling driver
<6>[    4.152069] NET: Registered protocol family 17
<6>[    4.152085] NET: Registered protocol family 15
<5>[    4.152118] Bridge firewalling registered
<6>[    4.152126] Ebtables v2.0 registered
<6>[    4.152148] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    4.152182] sii8240_init_cable_notify register extcon notifier for usb and ta
<6>[    4.152189] sec_otg_init_cable_notify register extcon notifier for usb and ta
<5>[    4.152773] Registering SWP/SWPB emulation handler
<6>[    4.157209] sec_debug_subsys_init: msm_shared_ram_phys=fa00000 SMEM_ID_VENDOR2=136 size=8780
<6>[    4.157221] sec_debug_subsys_init: krait(fa1b330) rpm(fa1bbf8) modem(fa1c46c) dsps(fa1cce0)
<3>[    4.157440] [SCFS] ERROR compr_init(151): cannot initialize compressor lzo, error -2
<3>[    4.157499] [SCFS] ERROR scfs_init(761): compressor initialization was failed.
<6>[    4.157713] max77826_get_op_register: id=16, reg=0x14, mask=0x8, pattern=0x8
<6>[    4.158078] max77826_get_op_register: id=15, reg=0x14, mask=0x2, pattern=0x2
<6>[    4.158436] max77826_get_op_register: id=13, reg=0x13, mask=0x8, pattern=0x8
<6>[    4.158826] max77826_get_op_register: id=11, reg=0x12, mask=0x80, pattern=0x80
<6>[    4.159184] max77826_get_op_register: id=10, reg=0x12, mask=0x20, pattern=0x20
<6>[    4.159541] max77826_get_op_register: id=9, reg=0x12, mask=0x8, pattern=0x8
<6>[    4.159898] max77826_get_op_register: id=8, reg=0x12, mask=0x2, pattern=0x2
<6>[    4.160255] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    4.160612] max77826_get_op_register: id=6, reg=0x11, mask=0x20, pattern=0x20
<6>[    4.160969] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.161325] max77826_get_op_register: id=4, reg=0x11, mask=0x2, pattern=0x2
<6>[    4.161682] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    4.162039] max77826_get_op_register: id=2, reg=0x10, mask=0x20, pattern=0x20
<6>[    4.162396] max77826_get_op_register: id=1, reg=0x10, mask=0x8, pattern=0x8
<6>[    4.162754] max77826_get_op_register: id=0, reg=0x10, mask=0x2, pattern=0x2
<6>[    4.163467] gdsc_oxili_gx: disabling
<6>[    4.163479] gdsc_venus: disabling
<6>[    4.163800] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.163848] sec_jack_probe : Registering jack driver
<6>[    4.163872] sec_jack_populate_dt_pdata : earjack-detect-gpio =445
<6>[    4.163886] sec_jack_populate_dt_pdata : earjack-sendend-gpio =77
<6>[    4.163891] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.163906] sec_jack_populate_dt_pdata : earjack-micbias-gpio =85
<6>[    4.163911] sec_jack_populate_dt_pdata : earjack-fsa_en-gpio =310
<6>[    4.163976] sec_jack_populate_dt_pdata : 4, 3, 10000, 10, 0
<6>[    4.164027] sec_jack_populate_dt_pdata : 4, 950, 10000, 10, 0
<6>[    4.164109] sec_jack_populate_dt_pdata : 4, 2400, 10000, 10, 1
<6>[    4.164204] sec_jack_populate_dt_pdata : 4, 9999, 10000, 10, 1
<6>[    4.164233] sec_jack_populate_dt_pdata : 3, 0, 0, 155
<6>[    4.164289] sec_jack_populate_dt_pdata : 3, 1, 156, 313
<6>[    4.164361] sec_jack_populate_dt_pdata : 3, 2, 314, 643
<6>[    4.164366] sec_jack_populate_dt_pdata - mpp-channel-scaling - 4 1 3
<6>[    4.164374] pcal6416a_gpio_request
<6>[    4.164378] pcal6416a_gpio_direction_output(off=[10], val=[1])
<6>[    4.164456] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.164618] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.165319] sec_jack_detect_work: detect_irq(0)
<6>[    4.165714] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.165875] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.166575] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.166740] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    4.166902] gpio-keys gpio_keys.96: [Keys] no regulator: ignoring
<6>[    4.166981] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:home_key, gpio:428, code:172, type:1, debounce:15
<6>[    4.167004] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_down, gpio:427, code:114, type:1, debounce:15
<6>[    4.167027] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_up, gpio:430, code:115, type:1, debounce:15
<6>[    4.167049] gpio-keys gpio_keys.96: [Hall_IC] device tree was founded
<7>[    4.167115] gpio_set_debounce: gpio-428 status -22
<7>[    4.167224] gpio_set_debounce: gpio-427 status -22
<7>[    4.167330] gpio_set_debounce: gpio-430 status -22
<6>[    4.167492] input: gpio-keys as /devices/gpio_keys.96/input/input4
<7>[    4.167500] [HALL_IC] : gpio_keys_open
<6>[    4.167665] gpio_keys_gpio_report_event: home_key key is released
<3>[    4.167671] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
<6>[    4.167808] gpio_keys_gpio_report_event: volume_down key is released
<3>[    4.167813] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
<6>[    4.167922] gpio_keys_gpio_report_event: volume_up key is released
<3>[    4.167926] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
<6>[    4.168220] qcom,qpnp-rtc qpnp-rtc-ea502a00: setting system clock to 2014-05-25 17:58:00 UTC (1401040680)
<6>[    4.168224] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<3>[    4.168232] [syscamera][msm_companion_init_module::2404]init companion module
<6>[    4.168393] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    4.168734] [syscamera][msm_companion_probe::2285][E]
<3>[    4.168793] [syscamera][msm_companion_get_dt_data::1433][qcom,cci-master::0][rc::0]
<6>[    4.168894] [syscamera][msm_companion_get_dt_data::1458]slave addr = 7a, sensor id = 73c1
<3>[    4.168899] [syscamera][msm_companion_probe::2336] i2c_func_tbl=cci
<3>[    4.169050] [syscamera][msm_companion_probe::2365] probe success
<3>[    4.169161] [syscamera][msm_companion_spi_probe::2224][E]
<6>[    4.169302] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.169534] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.170573] qcom_companion spi7.0: irq[0] cs[0] CPHA[0] CPOL[0] CS_HIGH[0]
<6>[    4.170578] qcom_companion spi7.0: max_speed[48000000]
<3>[    4.170587] [syscamera][msm_companion_spi_setup::2122]gpio-irq 28, rc 0
<3>[    4.170837] [syscamera][msm_companion_spi_setup::2210]spi probe success =0 X
<6>[    4.170958] Driver for 1-wire Dallas network protocol.
<6>[    4.171122] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<3>[    4.171217]
<3>[    4.171218] w1_gpio_msm_probe start
<6>[    4.171280] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.171411] input: w1 as /devices/onewire.89/input/input5
<3>[    4.171470] w1_uevent master_dev name = w1_bus_master1
<6>[    4.171599] w1_add_master_device : W1 workqueue will start
<6>[    4.171750] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.171842] msm_thermal:interrupt_mode_init Interrupt mode init
<6>[    4.171938] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.172620] sec_bat_parse_dt reading bat_int_gpio is empty
<6>[    4.172629] sec_bat_parse_dt: ta_irq_attr is Empty
<6>[    4.172639] sec_bat_parse_dt: chg_temp_check: 0
<6>[    4.172801] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 6
<6>[    4.172804] cable_source_type : 1, use_wireless_to_pogo : 0, event_waiting_time : 600
<6>[    4.172806] polling_type : 1, initial_count : 3, check_count : 0
<6>[    4.172808] check_adc_max : 1440, check_adc_min : 0
<6>[    4.172810] ovp_uvlo_check_type : 3, thermal_source : 2
<6>[    4.172812] temp_check_type : 2, temp_check_count : 1
<6>[    4.172817] board_battery_init : assign temp adc table
<6>[    4.177443] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    4.177802] max77804k_get_input_current: CHG_CNFG_09(0x12)
<3>[    4.177808] max17048_get_current_average: Fail to get psy (battery)
<6>[    4.179290] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    4.201010] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33898)
<3>[    4.201719] max17048_rcomp_update: Fail to get psy (battery)
<6>[    4.201821] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    4.202528] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    4.202534] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    4.202542] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4246mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[    4.202825] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    4.202851] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    4.202860] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    4.203443] sec_chg_get_property: reg_data(93)
<6>[    4.203453] sec_bat_check_cable_result_callback set ldo on
<4>[    4.203468] max77826_ldo6: Failed to create debugfs directory
<6>[    4.203475] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.203887] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.204602] sec_bat_check_cable_result_callback set ldo off
<4>[    4.204611] max77826_ldo6: Failed to create debugfs directory
<6>[    4.204617] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    4.205337] sec-battery battery.98: sec_battery_probe: SEC Battery Driver Loaded
<6>[    4.205540] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.205710] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.206125] tspdrv: tspdrv_probe.
<6>[    4.206145] tspdrv_parse_dt:382, changed_chip not specified
<7>[    4.206223] ImmVibeSPI_ForceOut_Initialize.
<4>[    4.206243] 8084_l23: Failed to create debugfs directory
<7>[    4.206252] haptic power_off is finished.
<7>[    4.206257] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[    4.206500] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    4.206661] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    4.206881] clock_late_init: Removing enables held for handed-off clocks
<6>[    4.208471] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    4.209260] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    4.211216] ALSA device list:
<6>[    4.211221]   No soundcards found.
<4>[    4.211261] Warning: unable to open an initial console.
<6>[    4.211367] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<5>[    4.212241] init: init started!
<7>[    4.214100] SELinux: 2048 avtab hash slots, 4855 rules.
<6>[    4.214115] SELinux:  Android master kernel running Android M policy in compatibility mode.
<7>[    4.215037] SELinux: 2048 avtab hash slots, 4855 rules.
<7>[    4.215045] SELinux:  1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
<7>[    4.215053] SELinux:  87 classes, 4855 rules
<7>[    4.215607] SELinux:  Completing initialization.
<7>[    4.215612] SELinux:  Setting up existing superblocks.
<7>[    4.215624] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    4.215638] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    4.216108] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    4.216119] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    4.216134] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.216149] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<6>[    4.233273] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33899)
<6>[    4.234215] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    4.235143] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    4.235149] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    4.235155] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4328mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[    4.235162] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    4.235169] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<7>[    4.238389] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    4.238400] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    4.238410] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    4.238420] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    4.238439] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    4.238496] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.238515] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[    4.252939] init: (Initializing SELinux enforcing took 0.04s.)
<5>[    4.256508] init: init second stage started!
<7>[    4.658740] [keys] flip_cover_work : 1 code 0x15
<3>[    4.933798] init: waitpid failed: No child processes
<3>[    4.934223] init: property_set("ro.hardware", "qcom") failed
<3>[    4.934332] init: property_set("ro.boot.bootdevice", "msm_sdcc.1") failed
<5>[    4.934631] init: (Loading properties from /default.prop took 0.00s.)
<3>[    4.935019] init: /init.rc: 57: invalid command 'load_all_props'
<3>[    4.935185] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
<5>[    4.935335] init: (Parsing /init.recovery.usb.rc took 0.00s.)
<5>[    4.935388] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
<5>[    4.935403] init: (Parsing /init.rc took 0.00s.)
<5>[    4.935583] init: Starting service 'ueventd'...
<5>[    4.935802] init: Starting service 'healthd'...
<5>[    4.935967] init: Waiting for /dev/.coldboot_done...
<5>[    4.937145] ueventd: ueventd started!
<3>[    4.937483] healthd: wakealarm_init: timerfd_create failed
<3>[    5.075398] w1_uevent master_dev name = w1_bus_master1
<6>[    5.122634] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    5.123680] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xde)
<6>[    5.125253] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    5.125779] sec_chg_get_property: reg_data(93)
<6>[    5.126306] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.140894] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.141423] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.143233] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    5.144142] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    5.144148] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    5.144157] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<3>[    5.943610] init: Timed out waiting for /dev/.coldboot_done
<5>[    5.943734] init: Waiting for /dev/.coldboot_done took 1.01s.
<7>[    5.944864] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<5>[    5.946387] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
<3>[    5.946510] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
<3>[    5.946574] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
<5>[    5.946934] init: (Loading properties from /system/build.prop took 0.00s.)
<5>[    5.946961] init: (Loading properties from /vendor/build.prop took 0.00s.)
<5>[    5.946986] init: (Loading properties from /factory/factory.prop took 0.00s.)
<3>[    5.947131] init: /recovery not specified in fstab
<5>[    5.947273] init: (Loading properties from /data/local.prop took 0.00s.)
<3>[    5.947295] init: Unable to open persistent property directory "/data/property": No such file or directory
<3>[    5.947471] init: Detected MSM SOC ID=194 SOC VER=65536 BOARD TYPE=MTP
<5>[    5.949186] init: Starting service 'set_permissive'...
<3>[    5.950413] init: Warning!  Service recovery needs a SELinux domain defined; please fix!
<5>[    5.950529] init: Starting service 'recovery'...
<3>[    5.950831] init: Warning!  Service qseecomd needs a SELinux domain defined; please fix!
<5>[    5.950944] init: Starting service 'qseecomd'...
<6>[    5.951170] usb: enabled: 0, dev->enabled: 0
<6>[    5.951321] usb: enabled: 0, dev->enabled: 0
<6>[    5.951462] usb: enabled: 1, dev->enabled: 0
<7>[    5.951468] usb: enable_store f_holder->f:mtp
<7>[    5.951471] usb: enable_store f_holder->f:adb
<7>[    5.951478] usb: enable_store vendor=4e8,product=6860,bcdDevice=232
<7>[    5.951482] ,Class=0,SubClass=0,Protocol=0
<7>[    5.951486] usb: enable_store next cmd : usb_add_config
<5>[    5.951533] init: Starting service 'adbd'...
<6>[    5.951744] usb: enabled: 0, dev->enabled: 1
<5>[    5.951764] init: Service 'adbd' is being killed...
<6>[    5.951822] usb: enabled: 1, dev->enabled: 0
<7>[    5.951828] usb: enable_store f_holder->f:mtp
<7>[    5.951833] usb: enable_store f_holder->f:adb
<7>[    5.951839] usb: enable_store vendor=4e8,product=6860,bcdDevice=232
<7>[    5.951844] ,Class=0,SubClass=0,Protocol=0
<7>[    5.951847] usb: enable_store next cmd : usb_add_config
<6>[    5.954043] adb_open
<6>[    5.954050] mtp_bind_config
<6>[    5.954071] adb_bind_config
<6>[    5.964924] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.965458] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.967327] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    5.970886] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
<5>[    5.972616] init: Service 'set_permissive' (pid 211) exited with status 0
<6>[    5.980851] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(0), power(0)
<6>[    5.982208] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(0), power(0)
<6>[    5.982368] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.982373] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.982379] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.982383] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(1), power(1)
<6>[    5.982390] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[    5.982554] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[    5.982560] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.982567] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[    5.983890] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.983895] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.983899] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.983904] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.983909] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<4>[    5.990894] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.990919] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.990941] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.990963] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.990984] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991006] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991027] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991049] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991062] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991067] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991072] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991077] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991082] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991087] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991092] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991097] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991102] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991107] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991112] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991117] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991122] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991128] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<4>[    5.991133] vm_start=b5990000 vm_end=b6980000 vm_page_prot=1799
<6>[    5.991763] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33898)
<6>[    5.992693] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    5.993607] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    5.993613] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    5.993620] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4326mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[    5.993627] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    5.993634] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<6>[    6.000009] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[    6.000014] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    6.000020] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[    6.000030] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    6.000034] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    6.000038] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    6.000041] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    6.000045] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<3>[    6.002695] samsung_dsi_panel_event_handler : unknown event (9)
<3>[    6.002719] samsung_dsi_panel_event_handler : unknown event (1)
<4>[    6.006192] mdss_dsi_on:1040 Panel already on.
<6>[    6.006200] mdss_dsi_panel_on : ++
<6>[    6.006203] mdss_dsi_panel_on: ctrl=ea41e010 ndx=0
<6>[    6.008567] mipi_samsung_manufacture_id: manufacture_id1=60
<6>[    6.011469] mipi_samsung_manufacture_id: manufacture_id2=28
<6>[    6.014366] mipi_samsung_manufacture_id: manufacture_id3=13
<6>[    6.014369] mipi_samsung_manufacture_id: manufacture_id=602813
<6>[    6.014373] set_panel_rev : 0x13 EVT1_K_fhd_REVI
<6>[    6.014376] mdss_dsi_panel_read_func : ++
<6>[    6.017415] mipi_samsung_disp_send_cmd done..
<6>[    6.026211] read_reg : C8[2] : 36 11 .
<6>[    6.029052] mipi_samsung_disp_send_cmd done..
<6>[    6.029056] manufacture_date = (20140617) - year(2014) month(6) day(17)
<6>[    6.031883] mipi_samsung_disp_send_cmd done..
<6>[    6.032470] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    6.040923] read_reg : D6[5] : 93 10 97 21 ae .
<6>[    6.043750] mipi_samsung_disp_send_cmd done..
<6>[    6.043755] mipi_samsung_ddi_id_read : 93 10 97 21 ae
<6>[    6.046589] mipi_samsung_disp_send_cmd done..
<6>[    6.055696] read_reg : C8[7] : 01 18 01 17 01 1c 07 .
<6>[    6.058534] mipi_samsung_disp_send_cmd done..
<6>[    6.061375] mipi_samsung_disp_send_cmd done..
<6>[    6.082253] read_reg : C8[15] : 82 7f 82 7c 7c 7c 7c .7c 7b 7e 7d 7e 7f 7f .7f .
<6>[    6.085090] mipi_samsung_disp_send_cmd done..
<6>[    6.088172] mipi_samsung_disp_send_cmd done..
<6>[    6.096768] read_reg : B6[1] : 13 .
<6>[    6.099617] mipi_samsung_disp_send_cmd done..
<6>[    6.102453] mipi_samsung_disp_send_cmd done..
<6>[    6.111063] read_reg : FD[1] : bc .
<6>[    6.113889] mipi_samsung_disp_send_cmd done..
<6>[    6.116728] mipi_samsung_disp_send_cmd done..
<6>[    6.125351] read_reg : A1[4] : 0b 9f 0c 56 .
<6>[    6.128183] mipi_samsung_disp_send_cmd done..
<6>[    6.128188] coordinate_tunning x : 2975, y : 3158, tune_number : 5
<6>[    6.128191] mdss_dsi_panel_read_func : --
<6>[    6.128194] mdss_dsi_panel_dimming_init : ++
<6>[    6.131021] mipi_samsung_disp_send_cmd done..
<6>[    6.162703] read_reg : C8[33] : 00 2a 00 12 00 5d 60 .62 60 5e 5f 5d 4c 4e .4c 51 56 51 60 64 60 .5e 63 63 48 59 54 5e .67 4d 02 03 02 .
<6>[    6.165530] mipi_samsung_disp_send_cmd done..
<6>[    6.165534] gamma_cell_determine ldi_revision: 0x602813
<6>[    6.165592] gamma_init_K_fhd_revI : start !!
<6>[    6.165604] gamma_init_K_fhd_revI : start !!
<6>[    6.165612] gamma_init_K_fhd_revI : start !!
<6>[    6.165621] gamma_init_K_fhd_revI : start !!
<6>[    6.165629] gamma_init_K_fhd_revI : start !!
<6>[    6.165638] gamma_init_K_fhd_revI : start !!
<6>[    6.165646] gamma_init_K_fhd_revI : start !!
<6>[    6.165654] gamma_init_K_fhd_revI : start !!
<6>[    6.165663] gamma_init_K_fhd_revI : start !!
<6>[    6.165671] gamma_init_K_fhd_revI : start !!
<6>[    6.165680] gamma_init_K_fhd_revI : start !!
<6>[    6.165689] gamma_init_K_fhd_revI : start !!
<6>[    6.165697] gamma_init_K_fhd_revI : start !!
<6>[    6.165706] gamma_init_K_fhd_revI : start !!
<6>[    6.165715] gamma_init_K_fhd_revI : start !!
<6>[    6.165724] gamma_init_K_fhd_revI : start !!
<6>[    6.165733] gamma_init_K_fhd_revI : start !!
<6>[    6.165742] gamma_init_K_fhd_revI : start !!
<6>[    6.165751] gamma_init_K_fhd_revI : start !!
<6>[    6.165761] gamma_init_K_fhd_revI : start !!
<6>[    6.165770] gamma_init_K_fhd_revI : start !!
<6>[    6.165779] gamma_init_K_fhd_revI : start !!
<6>[    6.165789] gamma_init_K_fhd_revI : start !!
<6>[    6.165798] gamma_init_K_fhd_revI : start !!
<6>[    6.165808] gamma_init_K_fhd_revI : start !!
<6>[    6.165817] gamma_init_K_fhd_revI : start !!
<6>[    6.165827] gamma_init_K_fhd_revI : start !!
<6>[    6.165837] gamma_init_K_fhd_revI : start !!
<6>[    6.165846] gamma_init_K_fhd_revI : start !!
<6>[    6.165856] gamma_init_K_fhd_revI : start !!
<6>[    6.165865] gamma_init_K_fhd_revI : start !!
<6>[    6.165876] gamma_init_K_fhd_revI : start !!
<6>[    6.165885] gamma_init_K_fhd_revI : start !!
<6>[    6.165895] gamma_init_K_fhd_revI : start !!
<6>[    6.165906] gamma_init_K_fhd_revI : start !!
<6>[    6.165916] gamma_init_K_fhd_revI : start !!
<6>[    6.165926] gamma_init_K_fhd_revI : start !!
<6>[    6.165936] gamma_init_K_fhd_revI : start !!
<6>[    6.165947] gamma_init_K_fhd_revI : start !!
<6>[    6.165958] gamma_init_K_fhd_revI : start !!
<6>[    6.165969] gamma_init_K_fhd_revI : start !!
<6>[    6.165980] gamma_init_K_fhd_revI : start !!
<6>[    6.165991] gamma_init_K_fhd_revI : start !!
<6>[    6.166002] gamma_init_K_fhd_revI : start !!
<6>[    6.166014] gamma_init_K_fhd_revI : start !!
<6>[    6.166025] gamma_init_K_fhd_revI : start !!
<6>[    6.166036] gamma_init_K_fhd_revI : start !!
<6>[    6.166048] gamma_init_K_fhd_revI : start !!
<6>[    6.166059] gamma_init_K_fhd_revI : start !!
<6>[    6.166071] gamma_init_K_fhd_revI : start !!
<6>[    6.166083] gamma_init_K_fhd_revI : start !!
<6>[    6.166095] gamma_init_K_fhd_revI : start !!
<6>[    6.166107] gamma_init_K_fhd_revI : start !!
<6>[    6.166119] gamma_init_K_fhd_revI : start !!
<6>[    6.166131] gamma_init_K_fhd_revI : start !!
<6>[    6.166143] gamma_init_K_fhd_revI : start !!
<6>[    6.166155] gamma_init_K_fhd_revI : start !!
<6>[    6.166167] gamma_init_K_fhd_revI : start !!
<6>[    6.166179] gamma_init_K_fhd_revI : start !!
<6>[    6.166192] gamma_init_K_fhd_revI : start !!
<6>[    6.166210] smart_dimming_init done
<6>[    6.166212] mdss_dsi_panel_dimming_init : --
<6>[    6.195573] mipi_samsung_disp_send_cmd done..
<5>[    6.243187] ueventd: Coldboot took 1.30s.
<6>[    6.301574] mipi_samsung_disp_send_cmd done..
<6>[    6.301581] get_elvss_tempcompen_control_set for ELVSS CONTROL acl(0), temp(20) B8(0x19)
<6>[    6.301586] get_elvss_tempcompen_control_set2 for ELVSS CONTROL acl(0), temp(20) B0(0x14) B6(0x13)
<6>[    6.301592] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,2,3)11,id3(0x13)
<6>[    6.301597] mipi_samsung_disp_send_cmd : panel is off state!!
<6>[    6.301600] [LCD]mipi_samsung_disp_send_cmd:Undefined command
<6>[    6.301606] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[    6.304806] mipi_samsung_disp_send_cmd done..
<3>[    6.304810] [mdnie lite] is negative Mode On = 0
<3>[    6.307973] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), AUTO(4), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[    6.307977] mdss_dsi_panel_on : --
<6>[    6.320810] now restoring TE/ rdptr_enabled++
<6>[    6.335466] mipi_samsung_disp_send_cmd done..
<6>[    6.335469] [check_te_step1] ++
<6>[    6.337871] now restoring TE/ rdptr_enabled++
<6>[    6.356335] now restoring TE/ rdptr_enabled++
<6>[    6.356342] [check_te_step1] first TE = 18460
<6>[    6.356346] [check_te_step1] fctrl = 5e
<6>[    6.356863] mipi_samsung_disp_send_cmd done..
<6>[    6.356866] [check_te_step1] --
<6>[    6.356868] [check_te_step2] ++
<6>[    6.373078] now restoring TE/ rdptr_enabled++
<6>[    6.389797] now restoring TE/ rdptr_enabled++
<6>[    6.389805] [check_te_step2] second TE = 16714
<6>[    6.389808] [check_te_step2] offset = 0
<6>[    6.390326] mipi_samsung_disp_send_cmd done..
<6>[    6.390329] [check_te_step2] --
<6>[    6.390331] [check_te_step3] ++
<6>[    6.406508] now restoring TE/ rdptr_enabled++
<6>[    6.423228] now restoring TE/ rdptr_enabled++
<6>[    6.423236] [check_te_step3] finals TE is (16716) - OK
<6>[    6.423239] [check_te_step3] --
<6>[    6.423316] mipi_samsung_disp_send_cmd done..
<6>[    6.423393] mipi_samsung_disp_send_cmd done..
<6>[    6.423692] read_reg : A[1] : 9c .
<6>[    6.423767] mipi_samsung_disp_send_cmd done..
<6>[    6.423770] DISPLAY_ON
<3>[    6.424901] samsung_dsi_panel_event_handler : unknown event (9)
<6>[    6.425186] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[    6.425195] [LCD]make_brightcontrol_set:bright_level: 162, candela_idx: 51( 220 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[    6.454314] mipi_samsung_disp_send_cmd done..
<6>[    6.478732] max77804k_chgin_init_work
<3>[    6.501159] samsung_dsi_panel_event_handler : unknown event (9)
<6>[    6.518422] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.518440] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.551772] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.551786] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.591793] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.591808] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.631516] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.631531] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.655830] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
<7>[    6.655843] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
<6>[    6.656788] SELinux:  Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
<6>[    6.666312] FAT-fs (mmcblk0p2[179:2]): trying to mount...
<3>[    6.666323] FAT-fs (mmcblk0p2[179:2]): Unrecognized mount option "ro" or missing value
<3>[    6.666428] FAT-fs (mmcblk0p2[179:2]): failed to mount!
<6>[    6.668806] FAT-fs (mmcblk0p2[179:2]): trying to mount...
<6>[    6.673534] FAT-fs (mmcblk0p2[179:2]): mounted successfully!
<7>[    6.673551] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
<6>[    6.674178] FAT-fs (mmcblk0p2[179:2]): trying to unmount...
<6>[    6.674186] FAT-fs (mmcblk0p2[179:2]): unmounted successfully!
<6>[    6.676147] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<3>[    6.676156] FAT-fs (mmcblk0p1[179:1]): Unrecognized mount option "ro" or missing value
<3>[    6.676257] FAT-fs (mmcblk0p1[179:1]): failed to mount!
<6>[    6.678799] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<6>[    6.683398] FAT-fs (mmcblk0p1[179:1]): mounted successfully!
<7>[    6.683406] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
<6>[    6.684018] FAT-fs (mmcblk0p1[179:1]): trying to unmount...
<6>[    6.684025] FAT-fs (mmcblk0p1[179:1]): unmounted successfully!
<6>[    6.690969] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[    6.690981] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[    6.717460] SELinux:  Context u:object_r:mpctl_socket:s0 is not valid (left unmapped).
<6>[    6.717593] SELinux:  Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
<6>[    6.718316] SELinux:  Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
<6>[    6.718581] SELinux:  Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
<6>[    6.718853] SELinux:  Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
<6>[    6.719196] SELinux:  Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
<6>[    6.719388] SELinux:  Context u:object_r:user_profile_foreign_dex_data_file:s0 is not valid (left unmapped).
<6>[    6.914675] SELinux:  Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
<6>[    6.914791] SELinux:  Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
<6>[    7.014614] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    7.015136] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    7.016939] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    7.038755] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33900)
<6>[    7.039666] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    7.040569] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    7.040575] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    7.040582] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4345mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[    7.040589] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    7.040595] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<6>[    7.138717] max77804k-muic max77804k-muic: func:max77804k_muic_init_detect
<6>[    7.139245] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[    7.139878] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:-1 ret:0
<6>[    7.139883] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x41
<6>[    7.139891] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x1, vbvolt:64 adc open prev:1
<6>[    7.139897] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: ATTACHED/CHANGED
<6>[    7.139901] max77804k-muic max77804k-muic: max77804k_muic_handle_attach:
<6>[    7.139905] max77804k-muic max77804k-muic: st1:0x3f st2:0x41
<6>[    7.139910] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x1, vbvolt:64
<6>[    7.139915] max77804k-muic max77804k-muic: chgdetrun:0x0, prev state:0x0
<6>[    7.139921] max77804k-muic max77804k-muic: state: cur=0x0, new=0x1, changed=0x1
<6>[    7.139926] extcon extcon-muic: extcon_set_cable_state: USB is attached
<6>[    7.139931] extcon extcon-muic: index = 0
<6>[    7.139936] extcon extcon-muic: state: 0x0, 0x1, mask: 0x1
<6>[    7.139940] extcon extcon-muic: state: 0x0 --> 0x1
<6>[    7.139946] extcon extcon-muic: _call_per_cable: USB is attached, calling 0xc05888a4
<6>[    7.139954] extcon extcon-muic: _call_per_cable: USB is attached, calling 0xc0771d54
<6>[    7.139960] sec-battery battery.98: batt_handle_notification: current_cable(4), wc_status(0), wire_status(4)
<6>[    7.139972] batt_handle_notification: CMD=ATTACH, attached_dev=0
<6>[    7.139981] sec_bat_check_cable_result_callback set ldo on
<4>[    7.140013] max77826_ldo6: Failed to create debugfs directory
<6>[    7.140018] max77804k-muic max77804k-muic: set_muic_path: current state=0x1, path=OPEN
<6>[    7.140022] max77804k-muic max77804k-muic: set path to (1)
<6>[    7.140026] max77804k_muic_set_safeout: MUIC safeout path=1
<6>[    7.140032] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    7.140615] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    7.143767] max77804k-muic max77804k-muic: set_muic_path: path: OPEN -> USB-AP
<6>[    7.145197] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[    7.145204] sec otg: USB is attached
<6>[    7.145803] sec_usb_work klte_usb_rdrv_pin = 312, enable=1
<6>[    7.145808] usb: dwc3 power supply set(1)
<6>[    7.145814] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(1)
<6>[    7.145820] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
<6>[    7.146171] max77804k_set_charge_current: reg_data(0x8b), charge(460)
<6>[    7.148713] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[    7.148751] msm_thermal:msm_therm_temp_log (0 --- 41)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 40)(5 --- 43)(6 --- 45)(7 --- 41)(8 --- 41)(9 --- 39)(10 --- 36)
<6>[    7.209228] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.210672] max77804k_set_topoff_current: reg_data(0x24), topoff(200)
<6>[    7.211080] sec-battery battery.98: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[    7.211086] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[    7.258720] msm-dwc3 msm_dwc3: dwc3_resume_work
<6>[    7.258726] msm-dwc3 msm_dwc3: dwc3_resume_work: already running
<4>[    7.490118] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
<6>[    7.490196] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
<6>[    7.596522] android_work: android_work: did not send uevent (0 0   (null))
<6>[    7.699881] usb:: dwc3_gadget_reset_interrupt
<6>[    7.710900] usb:: dwc3_gadget_conndone_interrupt (HS)
<3>[    7.710918] usb: Super speed host not available
<6>[    7.711080] android_work: android_work: did not send uevent (0 0   (null))
<6>[    7.714644] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    7.715171] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    7.716990] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<7>[    7.737801] usb: GET_DES
<6>[    7.737900] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[    7.738813] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33898)
<6>[    7.739735] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    7.740649] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[    7.740654] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    7.740661] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4335mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[    7.741490] usb:: dwc3_gadget_reset_interrupt
<7>[    7.741499] usb: composite_disconnect
<6>[    7.741547] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[    7.749000] usb:: dwc3_gadget_conndone_interrupt (HS)
<6>[    7.762495] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    7.763545] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[    7.765109] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    7.765117] sec-battery battery.98: sec_bat_time_management: Charging Time : 0 secs
<6>[    7.765124] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[    7.765649] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    7.765654] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[    7.765660] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
<7>[    7.820801] usb: GET_DES
<6>[    7.820883] android_work: android_work: sent uevent USB_STATE=CONNECTED
<7>[    7.821236] usb: set_config_number single config num=0
<7>[    7.821242] usb: set_interface_count next_interface_id=2
<7>[    8.063571] usb: GET_DES
<7>[    8.064008] usb: set_config_number single config num=0
<7>[    8.064015] usb: set_interface_count next_interface_id=2
<7>[    8.064137] usb: set_config_number single config num=0
<7>[    8.064143] usb: set_interface_count next_interface_id=2
<6>[    8.064319] android_usb gadget: high-speed config #1: fe8050c8.android_usb
<7>[    8.064384] usb: SET_CON
<7>[    8.064388] usb: set_config_number single config num=0
<6>[    8.118745] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[   10.712695] SELinux:  Context u:object_r:themeservice_app_data_file:s0 is not valid (left unmapped).
<6>[   10.745590] SELinux:  Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
<6>[   10.746558] SELinux:  Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
<6>[   10.748048] SELinux:  Context u:object_r:time_data_file:s0 is not valid (left unmapped).
<6>[   10.750972] SELinux:  Context u:object_r:vcs_data_file:s0 is not valid (left unmapped).
<6>[   10.752181] SELinux:  Context u:object_r:camera_socket:s0 is not valid (left unmapped).
<6>[   10.754220] SELinux:  Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
<6>[   10.754550] SELinux:  Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
<6>[   10.755753] SELinux:  Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
<6>[   10.762123] SELinux:  Context u:object_r:shortcut_manager_icons:s0 is not valid (left unmapped).
<6>[   10.980055] SELinux:  Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
<6>[   10.992463] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
<7>[   10.992478] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
<6>[   11.054258] [EXFAT] (mmcblk1p1[179:65]): trying to mount...
<6>[   11.167898] [EXFAT] (mmcblk1p1[179:65]): mounted successfully!
<7>[   11.167917] SELinux: initialized (dev mmcblk1p1, type exfat), uses genfs_contexts
<6>[   11.168651] [EXFAT] (mmcblk1p1[179:65]): trying to unmount...
<6>[   11.168678] [EXFAT] (mmcblk1p1[179:65]): unmounted successfully!
<6>[   12.111576] [EXFAT] (mmcblk1p1[179:65]): trying to mount...
<6>[   12.158716] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   12.158747] msm_thermal:msm_therm_temp_log (0 --- 42)(1 --- 39)(2 --- 37)(3 --- 38)(4 --- 40)(5 --- 43)(6 --- 44)(7 --- 41)(8 --- 41)(9 --- 39)(10 --- 36)
<6>[   12.202446] [EXFAT] (mmcblk1p1[179:65]): mounted successfully!
<7>[   12.202460] SELinux: initialized (dev mmcblk1p1, type exfat), uses genfs_contexts
<6>[   12.203361] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[   12.206534] usb: enabled: 0, dev->enabled: 1
<6>[   12.206546] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
<3>[   12.206553] dwc3 f9200000.dwc3: request e9aa1400 was not queued to ep0out
<7>[   12.206632] usb: usb_remove_config cdev->config=e8411f00, config=e8411f00
<6>[   12.206835] adb_release
<6>[   12.208863] usb: enabled: 0, dev->enabled: 0
<6>[   12.208870] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
<6>[   12.209011] usb: enabled: 1, dev->enabled: 0
<7>[   12.209017] usb: enable_store f_holder->f:adb
<7>[   12.209024] usb: enable_store vendor=4e8,product=685e,bcdDevice=232
<7>[   12.209029] ,Class=0,SubClass=0,Protocol=0
<7>[   12.209032] usb: enable_store next cmd : usb_add_config
<6>[   12.209037] adb_bind_config
<4>[   12.209115] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
<6>[   12.209204] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
<6>[   12.212074] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   12.212605] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   12.214451] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[   12.216562] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[   12.216576] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[   12.236299] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33896)
<6>[   12.237210] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   12.238113] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[   12.238119] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   12.238126] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4352mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[   12.259936] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   12.260969] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   12.262517] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[   12.262525] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
<3>[   12.311741] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   12.315487] android_work: android_work: did not send uevent (1 1   (null))
<6>[   12.420086] usb:: dwc3_gadget_reset_interrupt
<7>[   12.420094] usb: composite_disconnect
<6>[   12.420155] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   12.431098] usb:: dwc3_gadget_conndone_interrupt (HS)
<6>[   12.431130] android_work: android_work: did not send uevent (0 0   (null))
<7>[   12.458131] usb: GET_DES
<6>[   12.458203] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[   12.461865] usb:: dwc3_gadget_reset_interrupt
<7>[   12.461873] usb: composite_disconnect
<6>[   12.461911] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   12.469375] usb:: dwc3_gadget_conndone_interrupt (HS)
<7>[   12.524083] usb: GET_DES
<6>[   12.524150] android_work: android_work: sent uevent USB_STATE=CONNECTED
<7>[   12.524534] usb: set_config_number single config num=0
<7>[   12.524539] usb: set_interface_count next_interface_id=1
<7>[   12.540764] usb: GET_DES
<7>[   12.541212] usb: set_config_number single config num=0
<7>[   12.541216] usb: set_interface_count next_interface_id=1
<7>[   12.541473] usb: set_config_number single config num=0
<7>[   12.541477] usb: set_interface_count next_interface_id=1
<6>[   12.541725] android_usb gadget: high-speed config #1: fe8050c8.android_usb
<7>[   12.541758] usb: SET_CON
<7>[   12.541761] usb: set_config_number single config num=0
<6>[   12.598733] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[   14.455507] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 322, y = 1192, wx = 6, wy = 6 |[1]
<7>[   14.455950] tspdrv: Enable time = 80 msec
<6>[   14.455962] tspdrv: ENABLE
<7>[   14.456291] haptic power_on is finished.
<7>[   14.456298] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   14.523615] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   14.536311] haptic power_off is finished.
<7>[   14.536319] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   14.553834] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<3>[   14.577778] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   14.616333] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   15.048715] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   17.168719] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   17.168750] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 37)(3 --- 38)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<6>[   18.790431] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 278, y = 1686, wx = 6, wy = 5 |[1]
<3>[   18.810529] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   18.814149] tspdrv: Enable time = 80 msec
<6>[   18.814164] tspdrv: ENABLE
<7>[   18.814434] haptic power_on is finished.
<7>[   18.814442] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   18.845654] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   18.856002] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[5], Ver[A355][0/14]
<7>[   18.894530] haptic power_off is finished.
<7>[   18.894538] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[   18.949655] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   19.049667] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   22.178727] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   22.178758] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[   23.678628] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   23.679206] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   23.681020] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[   23.702839] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33889)
<6>[   23.703755] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   23.704663] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[   23.704669] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   23.704676] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4372mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[   23.726484] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   23.727530] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   23.729121] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[   23.729129] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
<6>[   26.048801] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   27.188736] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   27.188766] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[   32.198859] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   32.198888] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[   35.145213] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   35.145740] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   35.147549] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[   35.169363] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(258), Temp-ADC(33880)
<6>[   35.170277] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   35.171186] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[   35.171191] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   35.171197] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4375mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(258),is_hc_usb(0)
<6>[   35.193052] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   35.194098] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   35.195663] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[   35.195670] sec-battery battery.98: sec_bat_time_management: Charging Time : 82241612 secs
<6>[   35.195675] sec-battery battery.98: sec_bat_time_management: Charging Timer Expired
<6>[   35.197123] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(None), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
<6>[   37.048754] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   37.208711] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   37.208740] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[   42.218774] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   42.218804] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[   47.228769] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   47.228798] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 38)(8 --- 37)(9 --- 37)(10 --- 35)
<6>[   48.048702] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   52.238733] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   52.238762] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 35)(3 --- 36)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[   57.248775] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   57.248804] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[   59.048739] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<3>[   59.700717] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   62.258728] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   62.258760] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[   66.613697] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   66.614225] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   66.616038] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   66.637858] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(259), Temp-ADC(33875)
<6>[   66.638789] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   66.639698] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   66.639704] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (100.9)
<6>[   66.639710] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4357mV),Inow(450mA),Imax(460mA),SOC(100%),Tbat(259),is_hc_usb(0)
<6>[   66.661520] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   66.661529] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[   66.661536] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(None), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
<6>[   67.268690] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   67.268719] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 39)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[   70.048913] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   72.278809] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   72.278839] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 39)(6 --- 38)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<3>[   73.315643] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   77.288735] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   77.288766] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 36)(3 --- 37)(4 --- 37)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 36)
<6>[   78.316532] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 124, y = 773, wx = 6, wy = 6 |[1]
<3>[   78.414173] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   78.415793] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<7>[   78.417813] tspdrv: Enable time = 80 msec
<6>[   78.417829] tspdrv: ENABLE
<7>[   78.418090] haptic power_on is finished.
<7>[   78.418097] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<7>[   78.498218] haptic power_off is finished.
<7>[   78.498226] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[   78.512902] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   79.812413] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 838, y = 1141, wx = 6, wy = 6 |[1]
<7>[   79.813060] tspdrv: Enable time = 80 msec
<6>[   79.813072] tspdrv: ENABLE
<7>[   79.813340] haptic power_on is finished.
<7>[   79.813348] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<7>[   79.893484] haptic power_off is finished.
<7>[   79.893493] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   79.899685] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[7], Ver[A355][0/14]
<3>[   79.943509] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   79.966978] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   80.003643] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   81.048717] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   82.298717] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   82.298748] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 39)(9 --- 38)(10 --- 36)
<3>[   84.539308] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   87.308711] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   87.308742] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 39)(6 --- 39)(7 --- 39)(8 --- 38)(9 --- 38)(10 --- 36)