eganov

Untitled

Jul 17th, 2020
42
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@OpenWrt:/# reboot
  2. root@OpenWrt:/# [ 194.936666] br-lan: port 1(eth0.1) entered disabled state
  3. [ 194.953517] device eth0.1 left promiscuous mode
  4. [ 194.962878] br-lan: port 1(eth0.1) entered disabled state
  5. [ 195.013068] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  6. [ 195.330984] device eth0 left promiscuous mode
  7. [ 195.412443] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
  8. [ 199.709786] reboot: Restarting system
  9.  
  10. ===================================================================
  11. MT7621 stage1 code 10:33:11 (ASIC)
  12. CPU=50000000 HZ BUS=16666666 HZ
  13. ==================================================================
  14. Change MPLL source from XTAL to CR...
  15. do MEMPLL setting..
  16. MEMPLL Config : 0x11100000
  17. 3PLL mode + External loopback
  18. === XTAL-40Mhz === DDR-1200Mhz ===
  19. PLL3 FB_DL: 0xa, 1/0 = 707/317 29000000
  20. PLL4 FB_DL: 0x14, 1/0 = 626/398 51000000
  21. PLL2 FB_DL: 0x16, 1/0 = 564/460 59000000
  22. do DDR setting..[00320381]
  23. Apply DDR3 Setting...(use customer AC)
  24. 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
  25. --------------------------------------------------------------------------------
  26. 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  27. 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  28. 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  29. 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  30. 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  31. 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  32. 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  33. 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  34. 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  35. 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  36. 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  37. 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  38. 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  39. 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
  40. 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
  41. 000F:| 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0
  42. 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
  43. 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
  44. 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  45. 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  46. 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  47. 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  48. 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  49. 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  50. 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  51. 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  52. 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  53. 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  54. 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  55. 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  56. 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  57. 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  58. rank 0 coarse = 16
  59. rank 0 fine = 32
  60. B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0
  61. opt_dle value:9
  62. DRAMC_R0DELDLY[018]=00001C1B
  63. ==================================================================
  64. RX DQS perbit delay software calibration
  65. ==================================================================
  66. 1.0-15 bit dq delay value
  67. ==================================================================
  68. bit| 0 1 2 3 4 5 6 7 8 9
  69. --------------------------------------
  70. 0 | 11 9 9 12 10 9 11 9 6 10
  71. 10 | 10 13 6 11 9 10
  72. --------------------------------------
  73.  
  74. ==================================================================
  75. 2.dqs window
  76. x=pass dqs delay value (min~max)center
  77. y=0-7bit DQ of every group
  78. input delay:DQS0 =27 DQS1 = 28
  79. ==================================================================
  80. bit DQS0 bit DQS1
  81. 0 (1~52)26 8 (1~49)25
  82. 1 (2~51)26 9 (2~54)28
  83. 2 (1~52)26 10 (2~53)27
  84. 3 (1~51)26 11 (2~49)25
  85. 4 (1~51)26 12 (1~47)24
  86. 5 (1~54)27 13 (1~51)26
  87. 6 (1~52)26 14 (1~53)27
  88. 7 (1~52)26 15 (1~50)25
  89. ==================================================================
  90. 3.dq delay value last
  91. ==================================================================
  92. bit| 0 1 2 3 4 5 6 7 8 9
  93. --------------------------------------
  94. 0 | 12 10 10 13 11 9 12 10 9 10
  95. 10 | 11 15 10 13 10 13
  96. ==================================================================
  97. ==================================================================
  98. TX perbyte calibration
  99. ==================================================================
  100. DQS loop = 15, cmp_err_1 = ffff2000
  101. dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
  102. DQS loop = 14, cmp_err_1 = ffff0000
  103. dqs_perbyte_dly.last_dqsdly_pass[1]=14, finish count=2
  104. DQ loop=15, cmp_err_1 = ffff00a2
  105. dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=1
  106. DQ loop=14, cmp_err_1 = ffff00a0
  107. DQ loop=13, cmp_err_1 = ffff00a0
  108. DQ loop=12, cmp_err_1 = ffff0080
  109. DQ loop=11, cmp_err_1 = ffff0000
  110. dqs_perbyte_dly.last_dqdly_pass[0]=11, finish count=2
  111. byte:0, (DQS,DQ)=(a,8)
  112. byte:1, (DQS,DQ)=(8,8)
  113. 20,data:8a
  114. [EMI] DRAMC calibration passed
  115.  
  116. ===================================================================
  117. MT7621 stage1 code done
  118. CPU=50000000 HZ BUS=16666666 HZ
  119. ===================================================================
  120.  
  121.  
  122. U-Boot 1.1.3 (UBNT Build Version: e51_002_4c817) (May 27 2019 - 06:37:37)
  123.  
  124. Board: Ralink APSoC DRAM: 256 MB
  125. relocate_code Pointer at: 8ffac000
  126.  
  127. Config XHCI 40M PLL
  128. ******************************
  129. Software System Reset Occurred
  130. ******************************
  131. Allocate 16 byte aligned buffer: 8ffe1780
  132. Enable NFI Clock
  133. # MTK NAND # : Use HW ECC
  134. NAND ID [C2 DA 90 95 06]
  135. Device found in MTK table, ID: c2da, EXT_ID: 909506
  136. Support this Device in MTK table! c2da
  137. select_chip
  138. [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  139. Signature matched and data read!
  140. load_fact_bbt success 2047
  141. load fact bbt success
  142. [mtk_nand] probe successfully!
  143. mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
  144. ..
  145. UBNT e51 YY-YYYYY-14 XXXXXXXXXXXX
  146. UBNT BD type=e51, mac=XXXXXXXXXXXX, s/n=XXXXXXXXXXXX, mrev=14, k_idx=0
  147. ============================================
  148. Ralink UBoot Version: 4.3.S.0
  149. --------------------------------------------
  150. ASIC MT7621A DualCore (MAC to MT7530 Mode)
  151. DRAM_CONF_FROM: Auto-Detection
  152. DRAM_TYPE: DDR3
  153. DRAM bus: 16 bit
  154. Xtal Mode=3 OCP Ratio=1/3
  155. Flash component: NAND Flash
  156. Date:May 27 2019 Time:06:37:37
  157. ============================================
  158. icache: sets:256, ways:4, linesz:32 ,total:32768
  159. dcache: sets:256, ways:4, linesz:32 ,total:32768
  160.  
  161. ##### The CPU freq = 880 MHZ ####
  162. estimate memory size =256 Mbytes
  163. #Reset_MT7530
  164. Enable port 0
  165.  
  166. Please choose the operation:
  167. 1: Load system code to SDRAM via TFTP.
  168. 2: Load system code then write to Flash via TFTP.
  169. 3: Boot system code via Flash (default).
  170. 4: Entr boot command line interface.
  171. 7: Load Boot Loader code then write to Flash via Serial.
  172. 9: Load Boot Loader code then write to Flash via TFTP.
  173. r: Start TFTP recovery.
  174. default: 3 0
  175.  
  176. 3: System Boot system code via Flash.
  177. ## Booting image at bfd40000 ...
  178. Image Name: MIPS OpenWrt Linux-4.14.180
  179. Image Type: MIPS Linux Kernel Image (lzma compressed)
  180. Data Size: 1873931 Bytes = 1.8 MB
  181. Load Address: 80001000
  182. Entry Point: 80001000
  183. ............................. Verifying Checksum ... OK
  184. Uncompressing Kernel Image ... OK
  185. No initrd
  186. ## Transferring control to Linux (at address 80001000) ...
  187. ## Giving linux memsize in MB, 256
  188.  
  189. Starting kernel ...
  190.  
  191. [ 0.000000] Linux version 4.14.180 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 SMP Sat May 16 18:32:20 2020
  192. [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  193. [ 0.000000] bootconsole [early0] enabled
  194. [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  195. [ 0.000000] MIPS: machine is UBNT-ERX-SFP
  196. [ 0.000000] Determined physical RAM map:
  197. [ 0.000000] memory: 10000000 @ 00000000 (usable)
  198. [ 0.000000] Initrd not found or empty - disabling initrd
  199. [ 0.000000] VPE topology {2,2} total 4
  200. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  201. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  202. [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  203. [ 0.000000] Zone ranges:
  204. [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
  205. [ 0.000000] HighMem empty
  206. [ 0.000000] Movable zone start for each node
  207. [ 0.000000] Early memory node ranges
  208. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
  209. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
  210. [ 0.000000] random: get_random_bytes called from 0x80575744 with crng_init=0
  211. [ 0.000000] percpu: Embedded 14 pages/cpu s26224 r8192 d22928 u57344
  212. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
  213. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  214. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  215. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  216. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  217. [ 0.000000] Writing ErrCtl register=00058860
  218. [ 0.000000] Readback ErrCtl register=00058860
  219. [ 0.000000] Memory: 252464K/262144K available (4748K kernel code, 239K rwdata, 588K rodata, 1260K init, 255K bss, 9680K reserved, 0K cma-reserved, 0K highmem)
  220. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  221. [ 0.000000] Hierarchical RCU implementation.
  222. [ 0.000000] NR_IRQS: 256
  223. [ 0.000000] CPU Clock: 880MHz
  224. [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
  225. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
  226. [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
  227. [ 0.015496] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
  228. [ 0.087829] pid_max: default: 32768 minimum: 301
  229. [ 0.097144] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  230. [ 0.110165] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  231. [ 0.125898] Hierarchical SRCU implementation.
  232. [ 0.135361] smp: Bringing up secondary CPUs ...
  233. [ 0.148000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  234. [ 0.148009] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  235. [ 0.148021] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  236. [ 0.148152] CPU1 revision is: 0001992f (MIPS 1004Kc)
  237. [ 0.204737] Synchronize counters for CPU 1: done.
  238. [ 0.271755] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  239. [ 0.271764] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  240. [ 0.271771] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  241. [ 0.271839] CPU2 revision is: 0001992f (MIPS 1004Kc)
  242. [ 0.325574] Synchronize counters for CPU 2: done.
  243. [ 0.388824] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  244. [ 0.388831] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  245. [ 0.388838] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  246. [ 0.388916] CPU3 revision is: 0001992f (MIPS 1004Kc)
  247. [ 0.445145] Synchronize counters for CPU 3: done.
  248. [ 0.504738] smp: Brought up 1 node, 4 CPUs
  249. [ 0.516361] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  250. [ 0.535827] futex hash table entries: 1024 (order: 3, 32768 bytes)
  251. [ 0.548266] pinctrl core: initialized pinctrl subsystem
  252. [ 0.559986] NET: Registered protocol family 16
  253. [ 0.583529] mt7621_gpio 1e000600.gpio: registering 32 gpios
  254. [ 0.594773] mt7621_gpio 1e000600.gpio: registering 32 gpios
  255. [ 0.605988] mt7621_gpio 1e000600.gpio: registering 32 gpios
  256. [ 0.619816] clocksource: Switched to clocksource GIC
  257. [ 0.631478] NET: Registered protocol family 2
  258. [ 0.640796] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  259. [ 0.654559] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  260. [ 0.667329] TCP: Hash tables configured (established 2048 bind 2048)
  261. [ 0.680063] UDP hash table entries: 256 (order: 1, 8192 bytes)
  262. [ 0.691568] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  263. [ 0.704230] NET: Registered protocol family 1
  264. [ 0.949761] 4 CPUs re-calibrate udelay(lpj = 2924544)
  265. [ 0.961085] Crashlog allocated RAM at address 0x3f00000
  266. [ 0.971580] workingset: timestamp_bits=30 max_order=16 bucket_order=0
  267. [ 0.990790] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  268. [ 1.002272] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  269. [ 1.024125] random: fast init done
  270. [ 1.031831] io scheduler noop registered
  271. [ 1.039470] io scheduler deadline registered (default)
  272. [ 1.050791] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  273. [ 1.066907] console [ttyS0] disabled
  274. [ 1.073972] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
  275. [ 1.091926] console [ttyS0] enabled
  276. [ 1.091926] console [ttyS0] enabled
  277. [ 1.105683] bootconsole [early0] disabled
  278. [ 1.105683] bootconsole [early0] disabled
  279. [ 1.123757] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  280. [ 1.137792] Enable NFI Clock
  281. [ 1.143539] # MTK NAND # : Use HW ECC
  282. [ 1.150849] Device not found, ID: c2da
  283. [ 1.158290] Not Support this Device!
  284. [ 1.165754] chip_mode=00000001
  285. [ 1.171836] Support this Device in MTK table! c2da
  286. [ 1.181726] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  287. [ 1.194597] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
  288. [ 1.207244] nand: Macronix NAND 256MiB 3,3V 8-bit
  289. [ 1.216609] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  290. [ 1.231711] Scanning device for bad blocks
  291. [ 1.739435] 6 fixed-partitions partitions found on MTD device MT7621-NAND
  292. [ 1.752952] Creating 6 MTD partitions on "MT7621-NAND":
  293. [ 1.763375] 0x000000000000-0x000000080000 : "u-boot"
  294. [ 1.774320] 0x000000080000-0x0000000e0000 : "u-boot-env"
  295. [ 1.785897] 0x0000000e0000-0x000000140000 : "factory"
  296. [ 1.796978] 0x000000140000-0x000000440000 : "kernel1"
  297. [ 1.808077] 0x000000440000-0x000000740000 : "kernel2"
  298. [ 1.819213] 0x000000740000-0x00000ff00000 : "ubi"
  299. [ 1.831557] [mtk_nand] probe successfully!
  300. [ 1.840450] Signature matched and data read!
  301. [ 1.848931] load_fact_bbt success 2047
  302. [ 1.857047] libphy: Fixed MDIO Bus: probed
  303. [ 1.932410] libphy: mdio: probed
  304. [ 3.338440] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
  305. [ 3.350969] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
  306. [ 3.370219] NET: Registered protocol family 10
  307. [ 3.380643] Segment Routing with IPv6
  308. [ 3.388007] NET: Registered protocol family 17
  309. [ 3.396934] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  310. [ 3.422724] 8021q: 802.1Q VLAN Support v1.8
  311. [ 3.433897] UBI: auto-attach mtd5
  312. [ 3.440557] ubi0: attaching mtd5
  313. [ 5.712989] ubi0: scanning is finished
  314. [ 5.737636] ubi0: attached mtd5 (name "ubi", size 247 MiB)
  315. [ 5.748583] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  316. [ 5.762270] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  317. [ 5.775781] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  318. [ 5.789634] ubi0: good PEBs: 1982, bad PEBs: 0, corrupted PEBs: 0
  319. [ 5.801763] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  320. [ 5.816137] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1079959199
  321. [ 5.834317] ubi0: available PEBs: 0, total reserved PEBs: 1982, PEBs reserved for bad PEB handling: 40
  322. [ 5.852861] ubi0: background thread "ubi_bgt0d" started, PID 368
  323. [ 5.854505] block ubiblock0_0: created from ubi0:0(rootfs)
  324. [ 5.875749] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  325. [ 5.889615] hctosys: unable to open rtc device (rtc0)
  326. [ 5.905491] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  327. [ 5.924057] Freeing unused kernel memory: 1260K
  328. [ 5.933128] This architecture does not have kernel memory protection.
  329. [ 6.396201] init: Console is alive
  330. [ 6.403250] init: - watchdog -
  331. [ 6.587033] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  332. [ 6.653564] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  333. [ 6.670124] init: - preinit -
  334. [ 7.180014] mtk_soc_eth 1e100000.ethernet: PPE started
  335. Press the [f] key and hit [enter] to enter failsafe mode
  336. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  337. [ 10.400035] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 435
  338. [ 10.453504] random: procd: uninitialized urandom read (4 bytes read)
  339. [ 10.473374] UBIFS (ubi0:1): recovery needed
  340. [ 10.637049] UBIFS (ubi0:1): recovery completed
  341. [ 10.646051] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  342. [ 10.661659] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  343. [ 10.681402] UBIFS (ubi0:1): FS size: 242651136 bytes (231 MiB, 1911 LEBs), journal size 12189696 bytes (11 MiB, 96 LEBs)
  344. [ 10.703044] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  345. [ 10.716218] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID ED63A1F6-4E37-4F51-89D0-5272477D281C, small LPT model
  346. [ 10.744657] mount_root: switching to ubifs overlay
  347. [ 10.780662] urandom-seed: Seeding with /etc/urandom.seed
  348. [ 10.874479] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
  349. [ 10.896472] procd: - early -
  350. [ 10.902364] procd: - watchdog -
  351. [ 11.529948] procd: - watchdog -
  352. [ 11.536544] procd: - ubus -
  353. [ 11.606780] random: ubusd: uninitialized urandom read (4 bytes read)
  354. [ 11.622414] random: ubusd: uninitialized urandom read (4 bytes read)
  355. [ 11.635525] random: ubusd: uninitialized urandom read (4 bytes read)
  356. [ 11.649064] procd: - init -
  357. Please press Enter to activate this console.
  358. [ 12.160695] kmodloader: loading kernel modules from /etc/modules.d/*
  359. [ 12.227915] ip6_tables: (C) 2000-2006 Netfilter Core Team
  360. [ 12.243096] i2c /dev entries driver
  361. [ 12.255157] pca953x 0-0025: 0-0025 supply vcc not found, using dummy regulator
  362. [ 12.271821] pca953x 0-0025: interrupt support not compiled in
  363. [ 12.283433] i2c-gpio i2c-gpio: using pins 3 (SDA) and 4 (SCL)
  364. [ 12.298486] ip_tables: (C) 2000-2006 Netfilter Core Team
  365. [ 12.315305] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
  366. [ 12.318508] urngd: v1.0.2 started.
  367. [ 12.360889] xt_time: kernel timezone is -0000
  368. [ 12.375195] PPP generic driver version 2.4.2
  369. [ 12.384901] NET: Registered protocol family 24
  370. [ 12.396013] kmodloader: done loading kernel modules from /etc/modules.d/*
  371. [ 12.476555] random: crng init done
  372. [ 12.483356] random: 6 urandom warning(s) missed due to ratelimiting
  373. [ 18.256368] mtk_soc_eth 1e100000.ethernet: PPE started
  374. [ 18.273993] br-lan: port 1(eth0.1) entered blocking state
  375. [ 18.284847] br-lan: port 1(eth0.1) entered disabled state
  376. [ 18.296434] device eth0.1 entered promiscuous mode
  377. [ 18.306079] device eth0 entered promiscuous mode
  378. [ 18.317910] br-lan: port 1(eth0.1) entered blocking state
  379. [ 18.328786] br-lan: port 1(eth0.1) entered forwarding state
  380. [ 18.340394] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  381. [ 19.300469] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  382.  
  383.  
  384.  
  385. BusyBox v1.30.1 () built-in shell (ash)
  386.  
  387. _______ ________ __
  388. | |.-----.-----.-----.| | | |.----.| |_
  389. | - || _ | -__| || | | || _|| _|
  390. |_______|| __|_____|__|__||________||__| |____|
  391. |__| W I R E L E S S F R E E D O M
  392. -----------------------------------------------------
  393. OpenWrt 19.07.3, r11063-85e04e9f46
  394. -----------------------------------------------------
  395. root@OpenWrt:/#
RAW Paste Data