Advertisement
niwo

SMART #4

Apr 26th, 2020
61
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.54 KB | None | 0 0
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital RE Serial ATA
  6. Device Model: WDC WD2500YS-01SHB1
  7. Serial Number: WD-WCANY4199326
  8. LU WWN Device Id: 5 0014ee 1ab7accff
  9. Firmware Version: 20.06C06
  10. User Capacity: 251.000.193.024 bytes [251 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  14. Local Time is: Sun Apr 26 18:59:46 2020 CEST
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: FAILED!
  20. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  21. See vendor-specific Attribute list for failed Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x84) Offline data collection activity
  25. was suspended by an interrupting command from host.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 73) The previous self-test completed having
  28. a test element that failed and the test
  29. element that failed is not known.
  30. Total time to complete Offline
  31. data collection: ( 8400) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 98) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 6) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 4
  61. 3 Spin_Up_Time 0x0003 186 184 021 Pre-fail Always - 5675
  62. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1233
  63. 5 Reallocated_Sector_Ct 0x0033 104 104 140 Pre-fail Always FAILING_NOW 764
  64. 7 Seek_Error_Rate 0x000f 198 192 051 Pre-fail Always - 253
  65. 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19098
  66. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  67. 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1233
  69. 194 Temperature_Celsius 0x0022 110 100 000 Old_age Always - 40
  70. 196 Reallocated_Event_Count 0x0032 108 108 000 Old_age Always - 92
  71. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
  74. 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 48 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 48 occurred at disk power-on lifetime: 19086 hours (795 days + 6 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 04 61 f0 00 00 00 a0
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. e3 00 f0 00 00 00 00 00 01:19:04.234 IDLE
  104. ef 05 7f 00 00 00 00 00 01:19:04.232 SET FEATURES [Enable APM]
  105. ef 03 46 00 00 00 00 00 01:19:02.895 SET FEATURES [Set transfer mode]
  106. 25 00 08 08 00 00 00 00 01:19:02.806 READ DMA EXT
  107. ef 03 46 00 00 00 00 00 01:19:02.803 SET FEATURES [Set transfer mode]
  108.  
  109. Error 47 occurred at disk power-on lifetime: 19086 hours (795 days + 6 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 04 61 7f 00 00 00 a0 Device Fault; Error: ABRT
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. ef 05 7f 00 00 00 00 00 01:19:04.232 SET FEATURES [Enable APM]
  121. ef 03 46 00 00 00 00 00 01:19:02.895 SET FEATURES [Set transfer mode]
  122. 25 00 08 08 00 00 00 00 01:19:02.806 READ DMA EXT
  123. ef 03 46 00 00 00 00 00 01:19:02.803 SET FEATURES [Set transfer mode]
  124. 25 00 08 08 00 00 00 00 01:19:02.715 READ DMA EXT
  125.  
  126. Error 46 occurred at disk power-on lifetime: 19086 hours (795 days + 6 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. ef 03 46 00 00 00 00 00 01:19:02.895 SET FEATURES [Set transfer mode]
  138. 25 00 08 08 00 00 00 00 01:19:02.806 READ DMA EXT
  139. ef 03 46 00 00 00 00 00 01:19:02.803 SET FEATURES [Set transfer mode]
  140. 25 00 08 08 00 00 00 00 01:19:02.715 READ DMA EXT
  141. ef 03 46 00 00 00 00 00 01:19:02.712 SET FEATURES [Set transfer mode]
  142.  
  143. Error 45 occurred at disk power-on lifetime: 19086 hours (795 days + 6 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 04 61 08 08 00 00 e0 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000008 = 8
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. 25 00 08 08 00 00 00 00 01:19:02.806 READ DMA EXT
  155. ef 03 46 00 00 00 00 00 01:19:02.803 SET FEATURES [Set transfer mode]
  156. 25 00 08 08 00 00 00 00 01:19:02.715 READ DMA EXT
  157. ef 03 46 00 00 00 00 00 01:19:02.712 SET FEATURES [Set transfer mode]
  158. 25 00 08 00 63 38 1d 00 01:19:02.619 READ DMA EXT
  159.  
  160. Error 44 occurred at disk power-on lifetime: 19086 hours (795 days + 6 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. ef 03 46 00 00 00 00 00 01:19:02.803 SET FEATURES [Set transfer mode]
  172. 25 00 08 08 00 00 00 00 01:19:02.715 READ DMA EXT
  173. ef 03 46 00 00 00 00 00 01:19:02.712 SET FEATURES [Set transfer mode]
  174. 25 00 08 00 63 38 1d 00 01:19:02.619 READ DMA EXT
  175. ef 03 46 00 00 00 00 00 01:19:02.612 SET FEATURES [Set transfer mode]
  176.  
  177. SMART Self-test log structure revision number 1
  178. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  179. # 1 Short offline Completed: unknown failure 90% 19085 -
  180. # 2 Short offline Completed: read failure 90% 19078 6746210
  181. # 3 Extended offline Completed: read failure 90% 19078 6746210
  182.  
  183. SMART Selective self-test log data structure revision number 1
  184. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  185. 1 0 0 Not_testing
  186. 2 0 0 Not_testing
  187. 3 0 0 Not_testing
  188. 4 0 0 Not_testing
  189. 5 0 0 Not_testing
  190. Selective self-test flags (0x0):
  191. After scanning selected spans, do NOT read-scan remainder of disk.
  192. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement