Guest User

panda-es

a guest
Oct 16th, 2013
71
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Terminal ready
  2.  
  3. U-Boot SPL 2013.10-rc3-00001-g0db8b57 (Sep 18 2013 - 15:11:35)
  4. OMAP4460 ES1.1
  5. reading u-boot.img
  6. reading u-boot.img
  7.  
  8.  
  9. U-Boot 2013.10-rc3-00001-g0db8b57 (Sep 18 2013 - 15:11:35)
  10.  
  11. CPU : OMAP4460 ES1.1
  12. Board: OMAP4 Panda
  13. I2C: ready
  14. DRAM: 1 GiB
  15. MMC: OMAP SD/MMC: 0
  16. Using default environment
  17.  
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: No ethernet found.
  22. Hit any key to stop autoboot: 3 2 1 0
  23. mmc0 is current device
  24. SD/MMC found on device 0
  25. reading boot.scr
  26. ** Unable to read file boot.scr **
  27. reading uEnv.txt
  28. 982 bytes read in 7 ms (136.7 KiB/s)
  29. Importing environment from mmc0 ...
  30. Running uenvcmd ...
  31. (Re)start USB...
  32. USB0: ULPI: ulpi_reset: failed writing reset bit
  33. USB EHCI 1.00
  34. scanning bus 0 for devices... 3 USB Device(s) found
  35. scanning usb for storage devices... 0 Storage Device(s) found
  36. scanning usb for ethernet devices... 1 Ethernet Device(s) found
  37. usbethaddr=2E:60:05:CC:46:01
  38. ++A
  39. Waiting for Ethernet connection... done.
  40. BOOTP broadcast 1
  41. *** Unhandled DHCP Option in OFFER/ACK: 44
  42. *** Unhandled DHCP Option in OFFER/ACK: 46
  43. *** Unhandled DHCP Option in OFFER/ACK: 150
  44. *** Unhandled DHCP Option in OFFER/ACK: 44
  45. *** Unhandled DHCP Option in OFFER/ACK: 46
  46. *** Unhandled DHCP Option in OFFER/ACK: 150
  47. DHCP client bound to address x.y.91.78
  48. Using sms0 device
  49. TFTP from server x.y.91.59; our IP address is x.y.91.78
  50. Filename '/tftpboot/kernel/omap4-panda-es.dtb'.
  51. Load address: 0x80f80000
  52. Loading: *##########
  53. 540 KiB/s
  54. done
  55. Bytes transferred = 48712 (be48 hex)
  56. ++B
  57. ++C
  58. Waiting for Ethernet connection... done.
  59. BOOTP broadcast 1
  60. *** Unhandled DHCP Option in OFFER/ACK: 44
  61. *** Unhandled DHCP Option in OFFER/ACK: 46
  62. *** Unhandled DHCP Option in OFFER/ACK: 150
  63. *** Unhandled DHCP Option in OFFER/ACK: 44
  64. *** Unhandled DHCP Option in OFFER/ACK: 46
  65. *** Unhandled DHCP Option in OFFER/ACK: 150
  66. DHCP client bound to address x.y.91.78
  67. Using sms0 device
  68. TFTP from server x.y.91.59; our IP address is x.y.91.78
  69. Filename '/tftpboot/kernel/zImage'.
  70. Load address: 0x80200000
  71. Loading: *#################################################################
  72. #################################################################
  73. #################################################################
  74. #################################################################
  75. #################################################################
  76. #################################################################
  77. #################################################################
  78. #################################################################
  79. #################################################################
  80. #################################################################
  81. #################################################################
  82. #################################################################
  83. #######################################
  84. 560.5 KiB/s
  85. done
  86. Bytes transferred = 4190264 (3ff038 hex)
  87. ++D
  88. stopping USB..
  89. Kernel image @ 0x80200000 [ 0x000000 - 0x3ff038 ]
  90. ## Flattened Device Tree blob at 80f80000
  91. Booting using the fdt blob at 0x80f80000
  92. Using Device Tree in place at 80f80000, end 80f8ee47
  93.  
  94. Starting kernel ...
  95.  
  96. [ 0.000000] Booting Linux on physical CPU 0x0
  97. [ 0.000000] Linux version 3.12.0-rc5-00171-ge348c9e (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #4 SMP Wed Oct 16 09:44:41 CDT 2013
  98. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  99. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  100. [ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
  101. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000
  102. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  103. [ 0.000000] OMAP4460 ES1.1
  104. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c17b3000 s14656 r8192 d14016 u36864
  105. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368
  106. [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait earlyprintk
  107. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  108. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  109. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  110. [ 0.000000] Memory: 1007712K/1047552K available (5430K kernel code, 659K rwdata, 2100K rodata, 410K init, 5524K bss, 39840K reserved, 269312K highmem)
  111. [ 0.000000] Virtual kernel memory layout:
  112. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  113. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  114. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  115. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  116. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  117. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  118. [ 0.000000] .text : 0xc0008000 - 0xc0762a24 (7531 kB)
  119. [ 0.000000] .init : 0xc0763000 - 0xc07c9940 ( 411 kB)
  120. [ 0.000000] .data : 0xc07ca000 - 0xc086ef88 ( 660 kB)
  121. [ 0.000000] .bss : 0xc086ef88 - 0xc0dd3fa8 (5525 kB)
  122. [ 0.000000] Hierarchical RCU implementation.
  123. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  124. [ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_fclk
  125. [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
  126. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  127. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  128. [ 0.000000] smp_twd: clock not found -2
  129. [ 0.000000] Console: colour dummy device 80x30
  130. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  131. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  132. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  133. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  134. [ 0.000000] ... CLASSHASH_SIZE: 4096
  135. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  136. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  137. [ 0.000000] ... CHAINHASH_SIZE: 16384
  138. [ 0.000000] memory used by lock dependency info: 3695 kB
  139. [ 0.000000] per task-struct memory footprint: 1152 bytes
  140. [ 0.000000] Calibrating local timer... 348.15MHz.
  141. [ 0.059814] Calibrating delay loop... 1384.44 BogoMIPS (lpj=6922240)
  142. [ 0.149353] pid_max: default: 32768 minimum: 301
  143. [ 0.149841] Security Framework initialized
  144. [ 0.149993] Mount-cache hash table entries: 512
  145. [ 0.181915] CPU: Testing write buffer coherency: ok
  146. [ 0.183319] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  147. [ 0.183380] Setting up static identity map for 0xc05257f8 - 0xc0525868
  148. [ 0.183471] L310 cache controller enabled
  149. [ 0.183502] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1024 kB
  150. [ 0.188018] CPU1: Booted secondary processor
  151. [ 0.268737] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  152. [ 0.269256] Brought up 2 CPUs
  153. [ 0.269287] SMP: Total of 2 processors activated.
  154. [ 0.269287] CPU: All CPU(s) started in SVC mode.
  155. [ 0.271789] devtmpfs: initialized
  156. [ 0.280853] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  157. [ 0.362518] pinctrl core: initialized pinctrl subsystem
  158. [ 0.365692] regulator-dummy: no parameters
  159. [ 0.373687] NET: Registered protocol family 16
  160. [ 0.380279] DMA: preallocated 256 KiB pool for atomic coherent allocations
  161. [ 0.456176] OMAP GPIO hardware version 0.1
  162. [ 0.468170] omap-gpmc 50000000.gpmc: GPMC revision 6.0
  163. [ 0.489959] platform 4b501000.aes: Cannot lookup hwmod 'aes'
  164. [ 0.490539] platform 480a5000.des: Cannot lookup hwmod 'des'
  165. [ 0.499847] No ATAGs?
  166. [ 0.499877] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  167. [ 0.499908] hw-breakpoint: maximum watchpoint size is 4 bytes.
  168. [ 0.503173] OMAP DMA hardware revision 0.0
  169. [ 0.547424] bio: create slab <bio-0> at 0
  170. [ 0.550140] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
  171. [ 0.550201] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
  172. [ 0.603363] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
  173. [ 0.605194] hsusb1_vbus: 3300 mV
  174. [ 0.605590] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a31e040/pinmux_wl12xx_gpio, deferring probe
  175. [ 0.605621] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral
  176. [ 0.611999] SCSI subsystem initialized
  177. [ 0.613464] usbcore: registered new interface driver usbfs
  178. [ 0.613800] usbcore: registered new interface driver hub
  179. [ 0.614196] usbcore: registered new device driver usb
  180. [ 0.617248] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
  181. [ 0.617279] platform 48070000.i2c: Driver omap_i2c requests probe deferral
  182. [ 0.617340] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
  183. [ 0.617370] platform 48072000.i2c: Driver omap_i2c requests probe deferral
  184. [ 0.617431] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
  185. [ 0.617462] platform 48060000.i2c: Driver omap_i2c requests probe deferral
  186. [ 0.617523] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
  187. [ 0.617523] platform 48350000.i2c: Driver omap_i2c requests probe deferral
  188. [ 0.623229] Switched to clocksource 32k_counter
  189. [ 0.740417] NET: Registered protocol family 2
  190. [ 0.742187] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  191. [ 0.742492] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
  192. [ 0.745178] TCP: Hash tables configured (established 8192 bind 8192)
  193. [ 0.745391] TCP: reno registered
  194. [ 0.745422] UDP hash table entries: 512 (order: 3, 40960 bytes)
  195. [ 0.745788] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
  196. [ 0.747070] NET: Registered protocol family 1
  197. [ 0.748565] RPC: Registered named UNIX socket transport module.
  198. [ 0.748596] RPC: Registered udp transport module.
  199. [ 0.748596] RPC: Registered tcp transport module.
  200. [ 0.748596] RPC: Registered tcp NFSv4.1 backchannel transport module.
  201. [ 0.749389] NetWinder Floating Point Emulator V0.97 (double precision)
  202. [ 0.749908] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  203. [ 0.916412] bounce pool size: 64 pages
  204. [ 0.916992] VFS: Disk quotas dquot_6.5.2
  205. [ 0.917236] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  206. [ 0.919464] NFS: Registering the id_resolver key type
  207. [ 0.919830] Key type id_resolver registered
  208. [ 0.919830] Key type id_legacy registered
  209. [ 0.919952] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  210. [ 0.920501] msgmni has been set to 1474
  211. [ 0.924102] io scheduler noop registered
  212. [ 0.924133] io scheduler deadline registered
  213. [ 0.924224] io scheduler cfq registered (default)
  214. [ 0.927520] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
  215. [ 0.928009] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
  216. [ 0.931304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  217. [ 0.937866] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0
  218. [ 0.939727] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1
  219. [ 0.941009] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2
  220. [ 1.722564] console [ttyO2] enabled
  221. [ 1.727996] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3
  222. [ 1.761108] brd: module loaded
  223. [ 1.777343] loop: module loaded
  224. [ 1.785400] mtdoops: mtd device (mtddev=name/number) must be supplied
  225. [ 1.802093] usbcore: registered new interface driver asix
  226. [ 1.808105] usbcore: registered new interface driver ax88179_178a
  227. [ 1.814880] usbcore: registered new interface driver cdc_ether
  228. [ 1.821319] usbcore: registered new interface driver r815x
  229. [ 1.827484] usbcore: registered new interface driver smsc95xx
  230. [ 1.833862] usbcore: registered new interface driver net1080
  231. [ 1.840118] usbcore: registered new interface driver cdc_subset
  232. [ 1.846679] usbcore: registered new interface driver zaurus
  233. [ 1.852905] usbcore: registered new interface driver cdc_ncm
  234. [ 1.860290] usbcore: registered new interface driver cdc_wdm
  235. [ 1.866607] usbcore: registered new interface driver usb-storage
  236. [ 1.873352] usbcore: registered new interface driver usbtest
  237. [ 1.881988] mousedev: PS/2 mouse device common for all mice
  238. [ 1.891815] i2c /dev entries driver
  239. [ 1.895782] Driver for 1-wire Dallas network protocol.
  240. [ 1.903320] platform 4a002260.bandgap: Driver ti-soc-thermal requests probe deferral
  241. [ 1.914245] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  242. [ 1.925354] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
  243. [ 1.933013] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
  244. [ 1.940734] omap_hsmmc 4809c000.mmc: vmmc regulator missing
  245. [ 1.946746] omap-dma-engine 4a056000.dma-controller: freeing channel for 61
  246. [ 1.954101] omap-dma-engine 4a056000.dma-controller: freeing channel for 62
  247. [ 1.961517] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
  248. [ 1.969024] pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
  249. [ 1.976837] pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
  250. [ 1.986206] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
  251. [ 1.993865] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
  252. [ 2.001556] omap_hsmmc 480d5000.mmc: vmmc regulator missing
  253. [ 2.007873] omap-dma-engine 4a056000.dma-controller: freeing channel for 59
  254. [ 2.015258] omap-dma-engine 4a056000.dma-controller: freeing channel for 60
  255. [ 2.022705] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
  256. [ 2.034027] ledtrig-cpu: registered to indicate activity on CPUs
  257. [ 2.041320] usbcore: registered new interface driver usbhid
  258. [ 2.047271] usbhid: USB HID core driver
  259. [ 2.053009] oprofile: using arm/armv7-ca9
  260. [ 2.057830] TCP: cubic registered
  261. [ 2.061309] Initializing XFRM netlink socket
  262. [ 2.065948] NET: Registered protocol family 17
  263. [ 2.070709] NET: Registered protocol family 15
  264. [ 2.075683] Key type dns_resolver registered
  265. [ 2.080841] cpufreq_cpu0: failed to get cpu0 regulator: -19
  266. [ 2.089233] Power Management for TI OMAP4+ devices.
  267. [ 2.094451] Power Management for TI OMAP4.
  268. [ 2.098785] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
  269. [ 2.106170] ThumbEE CPU extension supported.
  270. [ 2.115264] vwl1271: 1800 mV
  271. [ 2.125396] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  272. [ 2.135894] twl 0-0048: PIH (irq 39) nested IRQs
  273. [ 2.142547] twl_rtc rtc.11: Power up reset detected.
  274. [ 2.148681] twl_rtc rtc.11: Enabling TWL-RTC
  275. [ 2.157928] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
  276. [ 2.166229] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
  277. [ 2.173736] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
  278. [ 2.180999] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
  279. [ 2.188262] VMMC: 1200 <--> 3000 mV at 3000 mV
  280. [ 2.194946] VPP: 1800 <--> 2500 mV at 1900 mV
  281. [ 2.201629] VUSIM: 1200 <--> 2900 mV at 1800 mV
  282. [ 2.208221] VDAC: 1800 mV
  283. [ 2.212493] VANA: 2100 mV
  284. [ 2.217193] VCXIO: 1800 mV
  285. [ 2.221679] VUSB: 3300 mV
  286. [ 2.226440] V1V8: 1800 mV
  287. [ 2.231109] V2V1: 2100 mV
  288. [ 2.244445] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
  289. [ 2.252563] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
  290. [ 2.261199] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
  291. [ 2.268859] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
  292. [ 2.279235] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
  293. [ 2.287048] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
  294. [ 2.297119] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
  295. [ 2.345581] pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
  296. [ 2.353729] pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
  297. [ 2.363128] omap-dma-engine 4a056000.dma-controller: allocating channel for 60
  298. [ 2.369750] omap-dma-engine 4a056000.dma-controller: allocating channel for 59
  299. [ 2.481018] mmc0: host does not support reading read-only switch. assuming write-enable.
  300. [ 2.492645] mmc0: new high speed SDHC card at address e624
  301. [ 2.500946] mmcblk0: mmc0:e624 SD04G 3.69 GiB
  302. [ 2.506500] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  303. [ 2.525634] mmcblk0: p1 p2
  304. [ 2.640686] EXT4-fs (mmcblk0p2): recovery complete
  305. [ 2.649078] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  306. [ 2.657836] VFS: Mounted root (ext4 filesystem) on device 179:2.
  307. [ 2.681701] devtmpfs: mounted
  308. [ 2.685333] Freeing unused kernel memory: 408K (c0763000 - c07c9000)
  309. Mounting proc : OK
  310. Mounting sysfs : OK
  311. Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
  312. boot mounted: OK
  313. /dev/ttyO2 linked to /dev/tty-bd - using as console
  314.  
  315. ******************************************
  316. Starting System Init for GenericOMAP4(FlattenedDeviceTree)
  317. Release: X.x
  318. Kernel: Linux GenericOMAP4(FlattenedDeviceTree) 3.12.0-rc5-00171-ge348c9e #4 SMP Wed Oct 16 09:44:41 CDT 2013 armv7l GNU/Linux
  319. ******************************************
  320. Saving kernel ring buffer : OK
  321. Mounting devpts : OK
  322. Setting up networking
  323. Configuring lo : OK
  324. Starting syslogd : OK
  325. Starting klogd : OK
  326. Mounting filesystems : OK
  327. mount: mounting none on /proc/bus/usb/ failed: No such file or directory
  328.  
  329. Please press Enter to activate this console.
  330.  
  331. cd pm-test-scripts/
  332. ./dvfs-basic.sh
  333. / $
  334. / $ cd pm-test-scripts/
  335. /pm-test-scripts $ ./dvfs-basic.sh
  336. ===================
  337. System CPUFREQ Configuration:
  338. ===================
  339. Scaling driver: generic_cpu0
  340. cpufreq-cpu0 Regulator not found. Checking for legacy mpu regulator
  341. Scaling Regulator: not found
  342. 350000 700000 920000 are the available frequencies
  343. ===================
  344. Boot Configuration:
  345. ===================
  346. bogomips@ boot:
  347. Boot scaling frequency =699977
  348. ===================
  349. Single OPP transition walk through test:
  350. ===================
  351. 1: TESTING for 1 seconds at 350000
  352. current scaling frequency(for 350000) =350000
  353. bogomips@ frequency 350000:
  354. 2: TESTING for 1 seconds at 700000
  355. current scaling frequency(for 700000) =700000
  356. bogomips@ frequency 700000:
  357. 3: TESTING for 1 seconds at 920000
  358. current scaling frequency(for 920000) =920000
  359. bogomips@ frequency 920000:
  360. ===================
  361. Rapid transitions test (print every 1000 all OPP combinations):
  362. ===================
  363. [0] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  364. [1] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  365. [2] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  366. [3] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  367. [4] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  368. [5] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  369. [6] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  370. [7] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  371. [8] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  372. [9] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  373. [10] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  374. [11] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  375. [12] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  376. [13] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  377. [14] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:18 CST 1999
  378. [15] 1000: 4 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  379. [16] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  380. [17] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  381. [18] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  382. [19] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  383. [20] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  384. [21] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  385. [22] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  386. [23] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  387. [24] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  388. [25] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  389. [26] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  390. [27] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  391. [28] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  392. [29] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  393. [30] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  394. [31] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  395. [32] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  396. [33] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  397. [34] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  398. [35] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  399. [36] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  400. [37] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  401. [38] 1000: 5 Seconds: Fri Dec 31 18:00:14 CST 1999 : time now = Fri Dec 31 18:00:19 CST 1999
  402. ^CTest start: Fri Dec 31 18:00:14 CST 1999 now: Fri Dec 31 18:00:19 CST 1999
  403. Test start: Fri Dec 31 18:00:14 CST 1999 now: Fri Dec 31 18:00:19 CST 1999
  404. /pm-test-scripts $
  405. Skipping tty reset...
  406. Thanks for using picocom
  407. picocom v1.4
  408.  
  409. port is : /dev/ttyS0
  410. flowcontrol : none
  411. baudrate is : 115200
  412. parity is : none
  413. databits are : 8
  414. escape is : C-a
  415. noinit is : yes
  416. noreset is : yes
  417. nolock is : yes
  418. send_cmd is : ascii_xfr -s -v -l10
  419. receive_cmd is : rz -vv
RAW Paste Data