Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELO
- CPU0
- PMCM
- PMCS
- PMCD
- CODE
- L1CD
- MMUI
- ZBBS
- MAIN
- 4.1605-1.0.38-118.3
- DRAM
- NVRAM memcfg 0x507
- MCB chksum 0xf66e5b14
- DDR3-1600 CL11 512MBx2
- Changed Byte Lane LDE
- Changed Byte Lane LDE
- PASS
- FPS0
- BT03
- 0001
- BT04
- 1036
- NAN3
- RFS2
- NAN5
- Base: 4.16_05
- CFE version 1.0.38-118.3 for BCM963138 (32bit,SP,LE)
- Build Date: Wed Jan 24 11:42:20 CST 2018 (macdux@macdux-System-Product-Name)
- Copyright (C) 2000-2015 Broadcom Corporation.
- Bootloader version: CFEROM : 3.5.20Nr1582 CFERAM : 3.5.25Nr2451
- Boot Strap Register: 0x7dfffc2f
- Chip ID: BCM63138B0, ARM Cortex A9 Dual Core: 1000MHz
- Total Memory: 1073741824 bytes (1024MB)
- NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
- NAND flash device: , id 0xc2dc block 128KB size 524288KB
- pmc_init:PMC using DQM mode
- Board IP address : 192.168.1.1:ffffff00
- Host IP address : 192.168.1.100
- Gateway IP address :
- Run from flash/host/tftp (f/h/c) : f
- Default host run file name : vmlinux
- Default host flash file name : bcm963xx_fs_kernel
- Boot delay (0-9 seconds) : 1
- Boot image (0=latest, 1=previous) : 0
- Default host ramdisk file name :
- Default ramdisk store address :
- Board Id (0-42) : RTV1905VWC3
- Number of MAC Addresses (1-32) : 11
- Base MAC Address : a0:64:8f:a8:9b:d0
- PSI Size (1-128) KBytes : 48
- Enable Backup PSI [0|1] : 0
- System Log Size (0-256) KBytes : 0
- Auxillary File System Size Percent: 0
- MC memory allocation (MB) : 4
- TM memory allocation (MB) : 44
- DHD 0 memory allocation (MB) : 14
- DHD 1 memory allocation (MB) : 14
- DHD 2 memory allocation (MB) : 0
- WLan Feature : 0x00
- Voice Board Configuration (0-1) : Si32260_LCQC_81
- Partition 1 Size (MB) : 247M
- Partition 2 Size (MB) : 1M
- Partition 3 Size (MB) : 0M
- Partition 4 Size (MB) (Data) : 4M
- *** Press any key to stop auto run (1 seconds) ***
- Auto run second count down: 110
- Booting from latest image (address 0x08180000, flash offset 0x08180000) ...
- Decompression LZMA Image OK!
- Entry at 0x00008000
- Starting program at 0x00008000
- Booting Linux on physical CPU 0
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 3.4.11-rt19 (jenkins@sahwbld04) (gcc version 4.6.2 (crosstool-NG git+ab5c880 - SoftAtHome 1.0.2) ) #1 SMP PREEMPT Tue Oct 9 17:27:56 CEST 2018
- CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine: BCM963138
- Ignoring unrecognised tag 0x41000603
- bootconsole [earlycon0] enabled
- init started: BusyBox v1.13.3 (2018-10-09 17:55:50 CEST)
- starting pid 384, tty '': '/etc/init.d/sysinit'
- SYSINIT
- SoftAtHome HGW version: SCCHSS09.05.00#00
- Compiled on sahwbld04.be.softathome.com, Tue, 09 Oct 2018 18:24:13 +0200
- With toolchain gcc version: arm-unknown-linux-gnueabi-gcc (crosstool-NG git+ab5c880 - SoftAtHome 1.0.2) 4.6.2
- Mounting tmpfs filesystem (/tmp) ...
- Tue Oct 9 17:18:15 CEST 2018
- panic_on_page_allocation_failure flag is not present in this kernel release...
- [1m[34mWifi Forwarding Driver is initialized![0m
- Initializing WLCSM Module
- WLCSM Module loaded successfully
- PCIe[0] Card preinit Status = GOOD
- PCIe[1] Card preinit Status = GOOD
- DHD_FKB_POOL size is:1280 and entry size:2592
- fkbpool address range: e3000000 <-> e332a000
- DHD_PKTTAG POOL size is:1280 and entry size:64
- dhd_module_init in
- dhd_queue_budget = 256
- dhd_sta_threshold = 2048
- dhd_if_threshold = 65536
- no wifi platform data, skip
- PCI_PROBE: bus 1, slot 0,vendor 14E4, device AA52(good PCI location)
- dhdpcie_init: can't find adapter info for this chip
- PCI: enabling device 0000:01:00.0 (0140 -> 0142)
- DHD: dongle ram size is set to 983040(orig 983040) at 0x180000
- dhd:0: fw path:/etc/wlan/dhd nv path:(null)
- Creating CPU ring for queue number 7 with 128 packets descriptor=0xbf1191f4
- Done initializing Ring 7 Base=0xffdf3000 End=0xffdf3800 calculated entries= 128 RDD Base=0x00c17000 descriptor=0xbf1191f4
- RDPA returned tx wakeup reg = <0x80299004>, val = <0x10000000>
- RDPA returned rx wakeup reg = <0x8029a004>, val = <0x26000000>
- dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
- dhd_attach: wl0: pre-allocated buffer mode is disabled (allocskbsz=0)
- dhd_attach(): thread:dhd_watchdog_thread:4c2 started
- dhd_attach(): thread:dhd0_dpc:4c3 started
- dhd_deferred_work_init: work queue initialized
- Creating CPU ring for queue number 0 with 1024 packets descriptor=0xbf291834
- Creating CPU ring for queue number 1 with 1024 packets descriptor=0xbf291850
- [1m[34m wfd_bind: Dev wl%d wfd_idx 0 wl_radio_idx 0 Type fkb configured WFD thread wfd0-thrd minQId/maxQId (8/9), status (0) qmask 0x3[0m
- Instantiating WFD 0 thread
- dhd:0: fw path:/etc/wlan/dhd nv path:(null)
- dhd_bus_download_firmware: firmware path=/etc/wlan/dhd, nvram path=
- dhdpcie_ramsize_adj: Enter
- dhdpcie_download_code_file: download firmware /etc/wlan/dhd/43602a1/rtecdc.bin
- wl:srom/otp not programmed, using main memory mapped srom info(wombo board)
- wl: ID=pci/0/1/0/
- wl: loading /etc/wlan/bcm43602_RTV1905VWC3_map.bin
- wl: updating srom from flash...
- wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20
- wl: reading /etc/wlan/bcm43602_nvramvars.bin, file size=20
- dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
- PCIe shared addr (0x001f5adc) read took 40023 usec before dongle is ready
- DMA RX offset from shared Area 0
- dhdpcie_readshared: Dongle advertizes 2 size indices
- dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it
- H2D DMA WR INDX : array size 288 = 2 * 134
- D2H DMA RD INDX : array size 32 = 2 * 3
- D2H DMA WR INDX : array size 32 = 2 * 3
- H2D DMA RD INDX : array size 288 = 2 * 134
- ring_info_raw: 56
- f0 a3 26 00 80 ac 26 00 8c ad 26 00 98 ae 26 00
- 9e ae 26 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 86 00 00 00
- dhdpcie_readshared: max H2D queues 134
- dhd_bus_start: Initializing 134 h2drings
- dhd_runner_flowmgr_init: bootmem name<dhd0> addr<cc000000> size<14680064>
- dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 01:0512
- dhd_runner_policy_init: N+M Policy = 0 1 (HW)
- dhd_bus_cmn_writeshared:
- 0000: 00 00 58 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 00 c2 00 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 00 74 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 c0 c1 00 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 80 c2 00 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 00 c0 22 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 10 14 00
- dhd_bus_cmn_writeshared:
- 0000: 00 c8 71 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 cc 71 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 c0 71 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 c4 71 23 00 00 00 00
- Attach flowrings pool for 132 rings
- [0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0xaa52> bus<1> slot<0>[0m
- Initial configuration
- =================================
- rx_post_flow_ring_base_addr : c0c20000
- tx_post_flow_ring_base_addr : cbfc4000
- rx_complete_flow_ring_base_addr : c0c28000
- tx_complete_flow_ring_base_addr : c0c1c000
- r2d_wr_arr_base_addr : ffdd4000
- d2r_rd_arr_base_addr : ffdd4402
- r2d_rd_arr_base_addr : ffdd4c00
- d2r_wr_arr_base_addr : ffdd4802
- tx_post_mgmt_arr_base_addr : ffdd5000
- tx_post_mgmt_arr_base_phys_addr : 2371d000
- r2d_wr_arr_base_phys_addr : 2371c000
- d2r_rd_arr_base_phys_addr : 2371c402
- r2d_rd_arr_base_phys_addr : 2371cc00
- d2r_wr_arr_base_phys_addr : 2371c802
- Doorbell ISR : bf2b734c
- Doorbell CTX : e34a0800
- [0;33;40mRunner DHD Offload initialization complete[0m
- CUR_ETHERADDR : 6
- 00 90 4c 17 2c ab
- dhd_sync_with_dongle: GET_REVINFO device 0x43bb, vendor 0x14e4, chipnum 0xaa52
- Dongle Host Driver, version 7.14.164.23.cpe4.16L05.0-kdb
- wfd_registerdevice Successfully registered dev wl0 ifidx 0 wfd_idx 0
- PCI_PROBE: bus 1, slot 0,vendor 14E4, device 43C5(good PCI location)
- dhdpcie_init: can't find adapter info for this chip
- PCI: enabling device 0001:01:00.0 (0140 -> 0142)
- DHD: dongle ram size is set to 1835008(orig 1835008) at 0x200000
- dhd:1: fw path:/etc/wlan/dhd nv path:(null)
- Creating CPU ring for queue number 1 with 128 packets descriptor=0xbf11902c
- Done initializing Ring 1 Base=0xffde5000 End=0xffde5800 calculated entries= 128 RDD Base=0x00c3d000 descriptor=0xbf11902c
- RDPA returned tx wakeup reg = <0x80299004>, val = <0x11000000>
- RDPA returned rx wakeup reg = <0x8029a004>, val = <0x27000000>
- dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
- dhd_attach: wl1: pre-allocated buffer mode is disabled (allocskbsz=0)
- dhd_attach(): thread:dhd_watchdog_thread:4c8 started
- dhd_attach(): thread:dhd1_dpc:4c9 started
- dhd_deferred_work_init: work queue initialized
- Creating CPU ring for queue number 2 with 1024 packets descriptor=0xbf29186c
- Creating CPU ring for queue number 3 with 1024 packets descriptor=0xbf291888
- [1m[34m wfd_bind: Dev wl%d wfd_idx 1 wl_radio_idx 1 Type fkb configured WFD thread wfd1-thrd minQId/maxQId (10/11), status (0) qmask 0xc[0m
- dhd:1: fw path:/etc/wlan/dhd nv path:(null)
- Instantiating WFD 1 thread
- dhd_bus_download_firmware: firmware path=/etc/wlan/dhd, nvram path=
- CONSOLE: hndarm_armr addr: 0x18002000, cr4_idx: 0
- dhdpcie_ramsize_adj: Enter
- dhdpcie_ramsize_adj: Adjust dongle RAMSIZE to 0x240000
- dhdpcie_download_code_file: download firmware /etc/wlan/dhd/4366c0/rtecdc.bin
- CONSOLE: 000000.001
- CONSOLE: RTE (PCIE-MSG_BUF) 7.35.260.80018 (r734392) on BCM43602 r1 @ 40.0/160.0/160.0MHz
- CONSOLE: 000000.002 allocating a max of 511 rxcplid buffers
- CONSOLE: 000000.003 pciemsgbuf0: Broadcom PCIE MSGBUF driver
- CONSOLE: 000000.005 reclaim section 0: Returned 48420 bytes to the heap
- CONSOLE: 000000.009 ../../../../../../wl/sys/wlc_bmac.c 4379
- CONSOLE: 000000.009 ../../../../../../wl/sys/wlc_bmac.c 4465
- CONSOLE: 000000.025 ../../../../../../wl/sys/wlc_bmac.c 4576
- CONSOLE: 000000.025 ../../../../../../wl/sys/wlc_bmac.c 17184
- CONSOLE: 000000.028 ../../../../../../wl/sys/wlc_stf.c 3572
- CONSOLE: 000000.029 ../../../../../../wl/sys/wlc_ampdu.c 10335
- CONSOLE: 000000.032 wl0: Broadcom BCM43602 802.11 Wireless Controller 7.35.260.80018 (r734392)
- CONSOLE: 000000.033 TCAM: 256 used: 234 exceed:0
- CONSOLE: 000000.033 reclaim section 1: Returned 148176 bytes to the heap
- CONSOLE:
- wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=20
- wl: reading /etc/wlan/bcm43664_nvramvars.bin, file size=20
- dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
- PCIe shared addr (0x002a7f5c) read took 638023 usec before dongle is ready
- DMA RX offset from shared Area 0
- dhdpcie_readshared: Dongle advertizes 2 size indices
- dhdpcie_readshared: Host support DMAing indices: H2D:1 - D2H:1. FW supports it
- H2D DMA WR INDX : array size 544 = 2 * 266
- D2H DMA RD INDX : array size 32 = 2 * 3
- D2H DMA WR INDX : array size 32 = 2 * 3
- H2D DMA RD INDX : array size 544 = 2 * 266
- ring_info_raw: 56
- fc 3a 43 00 cc 4b 43 00 e0 4d 43 00 f4 4f 43 00
- fa 4f 43 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 0a 01 00 00
- dhdpcie_readshared: max H2D queues 266
- dhd_bus_start: Initializing 266 h2drings
- dhd_runner_flowmgr_init: bootmem name<dhd1> addr<cb200000> size<14680064>
- dhd_runner_profile_init: N+M profile = 3 01:1024 -1:2048 -1:1024 -1:0512 01:0512
- dhd_runner_policy_init: N+M Policy = 0 1 (HW)
- dhd_bus_cmn_writeshared:
- 0000: 00 40 70 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 80 c4 00 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 00 7c 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 40 c4 00 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 00 c5 00 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 00 e0 22 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 10 14 00
- dhd_bus_cmn_writeshared:
- 0000: 00 48 7b 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 4c 7b 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 40 7b 23 00 00 00 00
- dhd_bus_cmn_writeshared:
- 0000: 00 44 7b 23 00 00 00 00
- Attach flowrings pool for 264 rings
- [0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x43c5> bus<1> slot<0>[0m
- Initial configuration
- =================================
- rx_post_flow_ring_base_addr : c0c48000
- tx_post_flow_ring_base_addr : cb1c4000
- rx_complete_flow_ring_base_addr : c0c50000
- tx_complete_flow_ring_base_addr : c0c44000
- r2d_wr_arr_base_addr : ffdbc000
- d2r_rd_arr_base_addr : ffdbc402
- r2d_rd_arr_base_addr : ffdbcc00
- d2r_wr_arr_base_addr : ffdbc802
- tx_post_mgmt_arr_base_addr : ffdbd000
- tx_post_mgmt_arr_base_phys_addr : 237b5000
- r2d_wr_arr_base_phys_addr : 237b4000
- d2r_rd_arr_base_phys_addr : 237b4402
- r2d_rd_arr_base_phys_addr : 237b4c00
- d2r_wr_arr_base_phys_addr : 237b4802
- Doorbell ISR : bf2b734c
- Doorbell CTX : e3486a00
- [0;33;40mRunner DHD Offload initialization complete[0m
- dhd_rx_frame: net device is NOT registered. drop event packet
- dhd_rx_frame: net device is NOT registered. drop event packet
- CUR_ETHERADDR : 6
- 00 90 4c 04 a1 50
- dhd_sync_with_dongle: GET_REVINFO device 0x43c5, vendor 0x14e4, chipnum 0xaa90
- Dongle Host Driver, version 7.14.164.23.cpe4.16L05.0-kdb
- wfd_registerdevice Successfully registered dev wl1 ifidx 0 wfd_idx 1
- Broadcom PCI Device 0x6313 has allocated with driver pcieport
- Broadcom PCI Device 0x6313 has allocated with driver pcieport
- dhd_module_init out
- PCIe[0] Card postinit Status = GOOD
- PCIe[1] Card postinit Status = GOOD
- CONSOLE: 000000.000 initvars_cis_pci: Not CIS format
- CONSOLE: 000000.000 srom rev:13
- CONSOLE: 000000.000 Setting clocks to 800/400/200
- CONSOLE: 000000.000 si_set_bb_vcofreq_frac: only work on 4360, 4350
- CONSOLE: 000000.000 Enabling D-cache
- CONSOLE: 026738.568 gic_dist_init max_irq 64
- CONSOLE: 026738.569 c_init: Watchdog reset bit set, clearing
- CONSOLE: 026738.569
- CONSOLE: RTE (PCIE-MSG_BUF) 10.10.122.26 (r733804) on BCM43664 r4 @ 40.0/200.0/800.0MHz
- CONSOLE: 026738.569 nvram_init: called again without calling nvram_exit()
- CONSOLE: 026738.569 initvars_cis_pci: Not CIS format
- CONSOLE: 026738.586 srom rev:13
- CONSOLE: 026738.594 allocating a max of 511 rxcplid buffers
- CONSOLE: 026738.594 pciemsgbuf0: Broadcom PCIE MSGBUF driver
- CONSOLE: 026738.594 nvram_init: called again without calling nvram_exit()
- CONSOLE: 026738.594 initvars_cis_pci: Not CIS format
- CONSOLE: 026738.611 srom rev:13
- CONSOLE: 026738.618 wlc_ucode_download: wl0: Loading non-MU ucode
- CONSOLE: 026738.619 reclaim section 0: Returned 216 bytes to the heap
- CONSOLE: 026738.619 initvars_cis_pci: Not CIS format
- CONSOLE: 026738.636 srom rev:13
- CONSOLE: 026738.644 wl1: wlc_attach: Overriding device id: 0x43c5 instead of 0x43c5
- CONSOLE: 026738.644 wlc_bmac_attach, deviceid 0x43c5 nbands 1
- CONSOLE: 026738.694 ipxotp_init: mapping otpbase at 0x18007000 to 0x18007000
- CONSOLE: 026738.694 wl1: wlc_bmac_attach: chiprev 4 corerev 65 cccap 0x58400009 maccap 0xf0018705 band 5G, phy_type 11 phy_rev 33
- CONSOLE: 026738.707 wl1: wlc_stf_txcore_shmem_write: No clock
- CONSOLE: 026738.710 wl1: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512
- CONSOLE: 026738.712 wl_eventq_dup_event: wl_eventq not initialized
- CONSOLE: 026738.712 wl_eventq_dup_event: wl_eventq not initialized
- CONSOLE: 026738.712 wl1: Broadcom BCM43664 802.11 Wireless Controller 10.10.122.26 (r733804)
- CONSOLE: 026738.713 SPLITRX_MODE_2 enabled : tcmsegsize 160
- CONSOLE: 026738.713 TCAM: 512 used: 257 exceed:0
- CONSOLE: 026738.713 reclaim section 1: Returned 180556 bytes to the heap
- CONSOLE: 026738.713 ThreadX v5.6 initialized
- CONSOLE:
- CONSOLE: 026738.965 wl1: wlc_enable_probe_req: state down, deferring setting of host flags
- CONSOLE: 026738.965 wl1: wlc_enable_probe_req: state down, deferring setting of host flags
- --SMP support
- wl: dsl_tx_pkt_flush_len=338
- wl: norm_wmark_tot=40389, pktc_wmark_tot=40389
- S02hardware: Enabling mcast-learn in flowcache
- Note: Loading 6300 MDK (default) driver for 0 chip
- S02hardware: Broadcom Packet Flow Cache Learning of multicast flows <ENABLED>
- Mount using the default checks
- Verifying device certificate
- WARNING: can't open config file: /openssl/openssl.cnf
- /perm/certs/cpe_device.crt.pem: OK
- Private device key for CPE WAN_ADDR A0:64:8F:A8:9B:D0 already exist. No private key generation
- A device certificate already exists for CPE WAN_ADDR A0:64:8F:A8:9B:D0
- Chanspec set to 0xe02a
- internetbox login: Success
- ret code = 0.
- Loading gmap modules ...
- Starting gmap module processes ...
- gMap started.
- Starting cwmpd
- dhd_monitor launch
- chown: unknown user/group figaro:pcb_users
- SpeedTest.startSpeedtestServer() done
- D%G'\00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement