Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [SPOILER="dmesg mit wenig Lesefehler"][code]
- [ 0.000000] Using PowerMac machine description
- [ 0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000)
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.0-31-powerpc-smp (buildd@fisher02) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #50~14.04.1-Ubuntu SMP Wed Jul 13 01:13:48 UTC 2016 (Ubuntu 4.4.0-31.50~14.04.1-powerpc-smp 4.4.13)
- [ 0.000000] Found initrd at 0xc1b00000:0xc2ef1f5a
- [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
- [ 0.000000] Mapped at 0xff7c0000
- [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
- [ 0.000000] Processor NAP mode on idle enabled.
- [ 0.000000] PowerMac motherboard: PowerBook G4 12"
- [ 0.000000] via-pmu: Server Mode is disabled
- [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
- [ 0.000000] CPU maps initialized for 1 thread per core
- [ 0.000000] (thread shift is 0)
- [ 0.000000] bootconsole [udbg0] enabled
- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
- [ 0.000000] PCI host bridge /pci@f0000000 ranges:
- [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
- [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
- [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
- [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges:
- [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
- [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
- [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
- [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
- [ 0.000000] PCI host bridge /pci@f4000000 ranges:
- [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
- [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
- [ 0.000000] nvram: Checking bank 0...
- [ 0.000000] nvram: gen0=1754, gen1=1755
- [ 0.000000] nvram: Active bank is: 1
- [ 0.000000] nvram: OF partition at 0x410
- [ 0.000000] nvram: XP partition at 0x1020
- [ 0.000000] nvram: NR partition at 0x1120
- [ 0.000000] Top of RAM: 0x20000000, Total RAM: 0x20000000
- [ 0.000000] Memory hole size: 0MB
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000001fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] free_area_init_node: node 0, pgdat c0bb0240, node_mem_map dfb5c000
- [ 0.000000] DMA zone: 1152 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 131072 pages, LIFO batch:31
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @dfb4b000 s22188 r8192 d22868 u53248
- [ 0.000000] pcpu-alloc: s22188 r8192 d22868 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
- [ 0.000000] Kernel command line: ro ramdisk_size=1048576 file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Sorting __ex_table...
- [ 0.000000] allocated 524288 bytes of page_ext
- [ 0.000000] Memory: 417400K/524288K available (8160K kernel code, 568K rwdata, 2816K rodata, 544K init, 1743K bss, 106888K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] Kernel virtual memory layout:
- [ 0.000000] * 0xfff9f000..0xfffff000 : fixmap
- [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs
- [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap
- [ 0.000000] * 0xe1000000..0xfdf32000 : vmalloc & ioremap
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
- [ 0.000000] NR_IRQS:512 nr_irqs:512 16
- [ 0.000000] mpic: Resetting
- [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs
- [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
- [ 0.000000] mpic: Initializing for 64 sources
- [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
- [ 0.000000] time_init: decrementer frequency = 18.432000 MHz
- [ 0.000000] time_init: processor frequency = 1499.999994 MHz
- [ 0.000012] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x440407933, max_idle_ns: 440795202532 ns
- [ 0.000023] clocksource: timebase mult[3640e38e] shift[24] registered
- [ 0.000034] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0]
- [ 0.000213] Console: colour dummy device 80x25
- [ 0.000226] console [tty0] enabled
- [ 0.000234] bootconsole [udbg0] disabled
- [ 0.000435] pid_max: default: 32768 minimum: 301
- [ 0.000532] Security Framework initialized
- [ 0.000541] Yama: becoming mindful.
- [ 0.000613] AppArmor: AppArmor initialized
- [ 0.000767] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000777] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001584] Initializing cgroup subsys io
- [ 0.001609] Initializing cgroup subsys memory
- [ 0.001640] Initializing cgroup subsys devices
- [ 0.001654] Initializing cgroup subsys freezer
- [ 0.001667] Initializing cgroup subsys net_cls
- [ 0.001680] Initializing cgroup subsys perf_event
- [ 0.001700] Initializing cgroup subsys net_prio
- [ 0.001713] Initializing cgroup subsys pids
- [ 0.001761] ftrace: allocating 26751 entries in 79 pages
- [ 0.040001] PowerMac SMP probe found 1 cpus
- [ 0.040049] MPC7450 family performance monitor hardware support registered
- [ 0.042809] Brought up 1 CPUs
- [ 0.043264] devtmpfs: initialized
- [ 0.043917] device-tree: Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
- [ 0.050158] evm: security.selinux
- [ 0.050168] evm: security.SMACK64
- [ 0.050174] evm: security.SMACK64EXEC
- [ 0.050179] evm: security.SMACK64TRANSMUTE
- [ 0.050185] evm: security.SMACK64MMAP
- [ 0.050190] evm: security.ima
- [ 0.050195] evm: security.capability
- [ 0.050873] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.052195] NET: Registered protocol family 16
- [ 0.053299] cpuidle: using governor ladder
- [ 0.053314] cpuidle: using governor menu
- [ 0.053646] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
- [ 0.053660] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
- [ 0.053792] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
- [ 0.053805] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
- [ 0.053855] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
- [ 0.053863] channel 1 bus <multibus>
- [ 0.053870] channel 2 bus <multibus>
- [ 0.068679] PCI: Probing PCI hardware
- [ 0.068968] PCI host bridge to bus 0000:00
- [ 0.068988] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff])
- [ 0.068999] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
- [ 0.069009] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
- [ 0.069021] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.069034] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
- [ 0.069088] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
- [ 0.069395] pci 0000:00:10.0: [10de:0329] type 00 class 0x030000
- [ 0.069433] pci 0000:00:10.0: reg 0x10: [mem 0x91000000-0x91ffffff]
- [ 0.069449] pci 0000:00:10.0: reg 0x14: [mem 0xa0000000-0xa7ffffff pref]
- [ 0.069492] pci 0000:00:10.0: reg 0x30: [mem 0x90000000-0x9001ffff pref]
- [ 0.069822] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.070019] PCI host bridge to bus 0001:10
- [ 0.070030] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
- [ 0.070040] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
- [ 0.070050] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff]
- [ 0.070061] pci_bus 0001:10: root bus resource [bus 10-ff]
- [ 0.070071] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
- [ 0.070125] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
- [ 0.070386] pci 0001:10:12.0: [14e4:4320] type 00 class 0x028000
- [ 0.070418] pci 0001:10:12.0: reg 0x10: [mem 0x80084000-0x80085fff]
- [ 0.070488] pci 0001:10:12.0: supports D1 D2
- [ 0.070497] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.070744] pci 0001:10:17.0: [106b:003e] type 00 class 0xff0000
- [ 0.070769] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
- [ 0.071028] pci 0001:10:18.0: [106b:003f] type 00 class 0x0c0310
- [ 0.071053] pci 0001:10:18.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 0.071294] pci 0001:10:19.0: [106b:003f] type 00 class 0x0c0310
- [ 0.071319] pci 0001:10:19.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 0.071536] pci 0001:10:1a.0: [106b:003f] type 00 class 0x0c0310
- [ 0.071560] pci 0001:10:1a.0: reg 0x10: [mem 0x80083000-0x80083fff]
- [ 0.071884] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
- [ 0.071920] pci 0001:10:1b.0: reg 0x10: [mem 0x80082000-0x80082fff]
- [ 0.071990] pci 0001:10:1b.0: supports D1 D2
- [ 0.072000] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.072267] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
- [ 0.072300] pci 0001:10:1b.1: reg 0x10: [mem 0x80081000-0x80081fff]
- [ 0.072371] pci 0001:10:1b.1: supports D1 D2
- [ 0.072380] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.072617] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
- [ 0.072650] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff]
- [ 0.072720] pci 0001:10:1b.2: supports D1 D2
- [ 0.072729] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.073220] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10
- [ 0.073438] PCI host bridge to bus 0002:20
- [ 0.073452] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff])
- [ 0.073462] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff]
- [ 0.073473] pci_bus 0002:20: root bus resource [bus 20-ff]
- [ 0.073483] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff
- [ 0.073531] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000
- [ 0.073778] pci 0002:20:0d.0: [106b:003b] type 00 class 0xff0000
- [ 0.073800] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
- [ 0.074019] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010
- [ 0.074048] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
- [ 0.074107] pci 0002:20:0e.0: supports D1 D2
- [ 0.074116] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
- [ 0.074346] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000
- [ 0.074371] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
- [ 0.074418] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
- [ 0.074751] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20
- [ 0.074928] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff]
- [ 0.074938] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
- [ 0.074948] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
- [ 0.074965] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
- [ 0.074975] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
- [ 0.074985] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
- [ 0.074998] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff]
- [ 0.075008] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
- [ 0.083151] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
- [ 0.083192] vgaarb: loaded
- [ 0.083197] vgaarb: bridge control possible 0000:00:10.0
- [ 0.084551] SCSI subsystem initialized
- [ 0.084749] libata version 3.00 loaded.
- [ 0.084986] usbcore: registered new interface driver usbfs
- [ 0.085037] usbcore: registered new interface driver hub
- [ 0.085081] usbcore: registered new device driver usb
- [ 0.086284] NetLabel: Initializing
- [ 0.086294] NetLabel: domain hash size = 128
- [ 0.086299] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.086355] NetLabel: unlabeled traffic allowed by default
- [ 0.086779] clocksource: Switched to clocksource timebase
- [ 0.138081] AppArmor: AppArmor Filesystem Enabled
- [ 0.148234] NET: Registered protocol family 2
- [ 0.148982] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.149046] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.149112] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.149213] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.149247] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.149456] NET: Registered protocol family 1
- [ 0.149562] Apple USB OHCI 0001:10:18.0 disabled by firmware
- [ 0.149576] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed.
- [ 0.149590] Apple USB OHCI 0001:10:19.0 disabled by firmware
- [ 0.149598] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
- [ 0.149622] pci 0001:10:1a.0: enabling device (0000 -> 0002)
- [ 0.202854] pci 0001:10:1b.0: enabling device (0000 -> 0002)
- [ 0.258808] pci 0001:10:1b.1: enabling device (0000 -> 0002)
- [ 0.314805] pci 0001:10:1b.2: enabling device (0004 -> 0006)
- [ 0.314857] PCI: CLS mismatch (32 != 1020), using 32 bytes
- [ 0.315133] Trying to unpack rootfs image as initramfs...
- [ 13.232933] Freeing initrd memory: 20420K (c1b00000 - c2ef1000)
- [ 13.233495] Thermal assist unit not available
- [ 13.234704] futex hash table entries: 256 (order: 1, 8192 bytes)
- [ 13.234850] audit: initializing netlink subsys (disabled)
- [ 13.234925] audit: type=2000 audit(1582110983.220:1): initialized
- [ 13.235475] Initialise system trusted keyring
- [ 13.245402] zbud: loaded
- [ 13.246029] VFS: Disk quotas dquot_6.6.0
- [ 13.246222] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 13.247698] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 13.248795] fuse init (API version 7.23)
- [ 13.249405] Key type big_key registered
- [ 13.249500] Allocating IMA MOK and blacklist keyrings.
- [ 13.251173] Key type asymmetric registered
- [ 13.251190] Asymmetric key parser 'x509' registered
- [ 13.251274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 13.251416] io scheduler noop registered
- [ 13.251429] io scheduler deadline registered (default)
- [ 13.251474] io scheduler cfq registered
- [ 13.251890] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 13.251924] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 13.252372] Using unsupported 1024x768 NVDA,Display-A at a0008000, depth=8, pitch=1024
- [ 13.265558] Console: switching to colour frame buffer device 128x48
- [ 13.278023] fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-A@0
- [ 13.279764] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 13.287027] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
- [ 13.287450] Generic non-volatile memory driver v1.1
- [ 13.287718] Linux agpgart interface v0.103
- [ 13.301897] brd: module loaded
- [ 13.309139] loop: module loaded
- [ 13.309712] MacIO PCI driver attached to Intrepid chipset
- [ 13.311637] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port
- [ 13.312226] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port
- [ 13.313752] pata-pci-macio 0002:20:0d.0: enabling device (0000 -> 0002)
- [ 13.313966] adb: starting probe task...
- [ 13.326819] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
- [ 13.328042] scsi host0: pata_macio
- [ 13.328484] ata1: PATA max UDMA/100 irq 39
- [ 13.338084] adb devices: [2]: 2 c4 [7]: 7 1f
- [ 13.342997] ADB keyboard at 2, handler 1
- [ 13.343018] Detected ADB keyboard, type ISO, swapping keys.
- [ 13.343245] input: ADB keyboard as /devices/virtual/input/input0
- [ 13.343445] input: ADB Powerbook buttons as /devices/virtual/input/input1
- [ 13.343457] adb: finished probe task...
- [ 14.346798] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
- [ 14.347743] scsi host1: pata_macio
- [ 14.347985] ata2: PATA max MWDMA2 irq 24
- [ 14.348361] libphy: Fixed MDIO Bus: probed
- [ 14.348375] tun: Universal TUN/TAP device driver, 1.6
- [ 14.348381] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 14.348655] PPP generic driver version 2.4.2
- [ 14.348987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 14.349097] ehci-pci: EHCI PCI platform driver
- [ 14.349239] ehci-pci 0001:10:1b.2: EHCI Host Controller
- [ 14.349266] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 1
- [ 14.349408] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000
- [ 14.358803] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
- [ 14.359037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 14.359049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 14.359058] usb usb1: Product: EHCI Host Controller
- [ 14.359067] usb usb1: Manufacturer: Linux 4.4.0-31-powerpc-smp ehci_hcd
- [ 14.359076] usb usb1: SerialNumber: 0001:10:1b.2
- [ 14.359661] hub 1-0:1.0: USB hub found
- [ 14.359701] hub 1-0:1.0: 5 ports detected
- [ 14.360555] ehci-platform: EHCI generic platform driver
- [ 14.360621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 14.360687] ohci-pci: OHCI PCI platform driver
- [ 14.360726] Apple USB OHCI 0001:10:18.0 disabled by firmware
- [ 14.360761] Apple USB OHCI 0001:10:19.0 disabled by firmware
- [ 14.360826] ohci-pci 0001:10:1a.0: OHCI PCI host controller
- [ 14.360850] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 2
- [ 14.360966] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80083000
- [ 14.434551] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 14.434562] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 14.434572] usb usb2: Product: OHCI PCI host controller
- [ 14.434581] usb usb2: Manufacturer: Linux 4.4.0-31-powerpc-smp ohci_hcd
- [ 14.434590] usb usb2: SerialNumber: 0001:10:1a.0
- [ 14.435176] hub 2-0:1.0: USB hub found
- [ 14.435217] hub 2-0:1.0: 2 ports detected
- [ 14.435825] ohci-pci 0001:10:1b.0: OHCI PCI host controller
- [ 14.435851] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 3
- [ 14.435924] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80082000
- [ 14.510534] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 14.510548] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 14.510557] usb usb3: Product: OHCI PCI host controller
- [ 14.510566] usb usb3: Manufacturer: Linux 4.4.0-31-powerpc-smp ohci_hcd
- [ 14.510575] usb usb3: SerialNumber: 0001:10:1b.0
- [ 14.511175] hub 3-0:1.0: USB hub found
- [ 14.511214] hub 3-0:1.0: 3 ports detected
- [ 14.511793] ohci-pci 0001:10:1b.1: OHCI PCI host controller
- [ 14.511819] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 4
- [ 14.511889] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80081000
- [ 14.567162] ata2.00: ATAPI: MATSHITADVD-R UJ-835E, GAND, max UDMA/66
- [ 14.587212] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 14.587223] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 14.587232] usb usb4: Product: OHCI PCI host controller
- [ 14.587241] usb usb4: Manufacturer: Linux 4.4.0-31-powerpc-smp ohci_hcd
- [ 14.587251] usb usb4: SerialNumber: 0001:10:1b.1
- [ 14.587823] hub 4-0:1.0: USB hub found
- [ 14.587863] hub 4-0:1.0: 2 ports detected
- [ 14.588450] ohci-platform: OHCI generic platform driver
- [ 14.588521] uhci_hcd: USB Universal Host Controller Interface driver
- [ 14.589349] mousedev: PS/2 mouse device common for all mice
- [ 14.589825] i2c /dev entries driver
- [ 14.590219] PowerMac i2c bus pmu 2 registered
- [ 14.590611] PowerMac i2c bus pmu 1 registered
- [ 14.591023] PowerMac i2c bus mac-io 0 registered
- [ 14.591578] PowerMac i2c bus uni-n 1 registered
- [ 14.591776] adt746x: version 1 (supported)
- [ 14.591786] sensor 0: HDD BOTTOMSIDE
- [ 14.591793] sensor 1: CPU TOPSIDE
- [ 14.591800] sensor 2: GPU ON DIE
- [ 14.592275] adt746x: ADT7467 initializing
- [ 14.594577] adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70
- [ 14.595322] ata2.00: configured for MWDMA2
- [ 14.598491] device-mapper: uevent: version 1.0.3
- [ 14.598947] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
- [ 14.599105] Registering PowerMac CPU frequency driver
- [ 14.599113] Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
- [ 14.606966] ledtrig-cpu: registered to indicate activity on CPUs
- [ 14.607652] NET: Registered protocol family 10
- [ 14.608296] NET: Registered protocol family 17
- [ 14.608331] Key type dns_resolver registered
- [ 14.608924] registered taskstats version 1
- [ 14.608962] Loading compiled-in X.509 certificates
- [ 14.613222] Loaded X.509 cert 'Build time autogenerated kernel key: fc18630cb6a544806558240f39e054ccaca42543'
- [ 14.613296] zswap: loaded using pool lzo/zbud
- [ 14.624456] Key type trusted registered
- [ 14.642444] Key type encrypted registered
- [ 14.642483] AppArmor: AppArmor sha1 policy hashing enabled
- [ 14.642493] ima: No TPM chip found, activating TPM-bypass!
- [ 14.642581] evm: HMAC attrs: 0x1
- [ 14.643345] input: PMU as /devices/virtual/input/input2
- [ 14.643571] hctosys: unable to open rtc device (rtc0)
- [ 14.643936] PM: Hibernation image not present or could not be loaded.
- [ 14.770781] usb 2-1: new full-speed USB device number 2 using ohci-pci
- [ 14.987823] usb 2-1: New USB device found, idVendor=05ac, idProduct=1000
- [ 14.987830] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 15.114775] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 15.126780] usb 2-2: new full-speed USB device number 3 using ohci-pci
- [ 15.248543] usb 1-1: New USB device found, idVendor=0781, idProduct=5583
- [ 15.248549] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 15.248554] usb 1-1: Product: Ultra Fit
- [ 15.248558] usb 1-1: Manufacturer: SanDisk
- [ 15.248563] usb 1-1: SerialNumber: 4C530001200708102432
- [ 15.300809] usb 2-2: New USB device found, idVendor=05ac, idProduct=030a
- [ 15.300816] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 15.300821] usb 2-2: Product: Apple Internal Trackpad
- [ 15.300826] usb 2-2: Manufacturer: Apple Computer
- [ 18.482795] ata1.00: qc timeout (cmd 0xec)
- [ 18.482805] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 23.522774] ata1: link is slow to respond, please be patient (ready=0)
- [ 28.506773] ata1: device not ready (errno=-16), forcing hardreset
- [ 33.702773] ata1: link is slow to respond, please be patient (ready=0)
- [ 38.518773] ata1: SRST failed (errno=-16)
- [ 43.714772] ata1: link is slow to respond, please be patient (ready=0)
- [ 48.530772] ata1: SRST failed (errno=-16)
- [ 53.726772] ata1: link is slow to respond, please be patient (ready=0)
- [ 89.094783] ata1.00: qc timeout (cmd 0xec)
- [ 89.094789] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 94.134772] ata1: link is slow to respond, please be patient (ready=0)
- [ 99.118772] ata1: device not ready (errno=-16), forcing hardreset
- [ 104.314772] ata1: link is slow to respond, please be patient (ready=0)
- [ 109.130772] ata1: SRST failed (errno=-16)
- [ 114.326772] ata1: link is slow to respond, please be patient (ready=0)
- [ 119.142772] ata1: SRST failed (errno=-16)
- [ 124.338773] ata1: link is slow to respond, please be patient (ready=0)
- [ 156.987166] ata1.00: ATA-6: TOSHIBA MK8026GAX, PA005B, max UDMA/100
- [ 156.987173] ata1.00: 156301488 sectors, multi 16: LBA48
- [ 156.995080] ata1.00: configured for UDMA/100
- [ 156.995479] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA 5B PQ: 0 ANSI: 5
- [ 156.996147] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 156.996276] sd 0:0:0:0: [sda] Write Protect is off
- [ 156.996283] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 156.996338] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 156.997016] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 156.998914] scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-835E GAND PQ: 0 ANSI: 5
- [ 157.009013] sr 1:0:0:0: [sr0] scsi3-mmc drive: 47x/47x writer cd/rw xa/form2 cdda tray
- [ 157.009021] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 157.009368] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 157.009631] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 158.484693] sda: [mac] sda1 sda2 sda3 sda4
- [ 158.485661] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 158.486586] Freeing unused kernel memory: 544K (c0abc000 - c0b44000)
- [ 158.560475] systemd-udevd[124]: starting version 204
- [ 158.679497] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
- [ 158.680940] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
- [ 158.690916] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
- [ 158.706552] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
- [ 158.706599] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
- [ 158.706607] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
- [ 158.706614] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
- [ 158.706621] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
- [ 158.706627] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
- [ 158.706634] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
- [ 158.715085] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
- [ 158.840520] hidraw: raw HID events driver (C) Jiri Kosina
- [ 158.872047] sungem.c:v1.0 David S. Miller <davem@redhat.com>
- [ 158.872730] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:72:1e:34
- [ 158.885183] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 158.904201] scsi host2: usb-storage 1-1:1.0
- [ 158.904509] usbcore: registered new interface driver usb-storage
- [ 158.945903] usbcore: registered new interface driver uas
- [ 158.964500] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
- [ 158.972815] usbcore: registered new interface driver usbhid
- [ 158.972828] usbhid: USB HID core driver
- [ 158.998680] [drm] Initialized drm 1.1.0 20060810
- [ 159.019188] firewire_ohci 0002:20:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
- [ 159.451371] random: nonblocking pool is initialized
- [ 159.516808] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/0003:05AC:1000.0001/input/input3
- [ 159.519175] firewire_core 0002:20:0e.0: created device fw0: GUID 001124fffe721e34, S400
- [ 159.576855] hid-generic 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0
- [ 159.577657] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/0003:05AC:1000.0002/input/input4
- [ 159.578196] hid-generic 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1
- [ 159.590065] checking generic (a0008000 c0000) vs hw (a0000000 8000000)
- [ 159.590079] fb: switching to nouveaufb from OFfb NVDA,Displ
- [ 159.590172] Console: switching to colour dummy device 80x25
- [ 159.591650] nouveau 0000:00:10.0: NVIDIA NV34 (034900b1)
- [ 159.594566] nouveau 0000:00:10.0: bios: version 04.34.20.18.00
- [ 159.600317] nouveau 0000:00:10.0: tmr: unknown input clock freq
- [ 159.600338] nouveau 0000:00:10.0: fb: 64 MiB DDR1
- [ 159.603320] [TTM] Zone kernel: Available graphics memory: 252604 kiB
- [ 159.603328] [TTM] Initializing pool allocator
- [ 159.603343] [TTM] Initializing DMA pool allocator
- [ 159.603386] nouveau 0000:00:10.0: DRM: VRAM: 63 MiB
- [ 159.603391] nouveau 0000:00:10.0: DRM: GART: 128 MiB
- [ 159.603399] nouveau 0000:00:10.0: DRM: BMP version 5.38
- [ 159.603406] nouveau 0000:00:10.0: DRM: DCB version 2.2
- [ 159.603415] nouveau 0000:00:10.0: DRM: DCB outp 00: 04000223 00000004
- [ 159.603422] nouveau 0000:00:10.0: DRM: DCB outp 01: 01110112 11700000
- [ 159.603428] nouveau 0000:00:10.0: DRM: DCB outp 02: 02010110 117088b8
- [ 159.603433] nouveau 0000:00:10.0: DRM: DCB outp 03: 02010111 11700703
- [ 159.603466] nouveau 0000:00:10.0: DRM: Loading NV17 power sequencing microcode
- [ 159.608959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 159.608971] [drm] Driver supports precise vblank timestamp query.
- [ 159.611662] nouveau 0000:00:10.0: DRM: MM: using M2MF for buffer copies
- [ 159.611692] nouveau 0000:00:10.0: DRM: Calling LVDS script 1:
- [ 159.611699] nouveau 0000:00:10.0: DRM: 0x09F2: Parsing digital output script table
- [ 159.611708] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 159.611714] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 160.100035] nouveau 0000:00:10.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
- [ 160.135144] scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
- [ 160.136675] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 160.137299] sd 2:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
- [ 160.139071] sd 2:0:0:0: [sdb] Write Protect is off
- [ 160.139084] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
- [ 160.140184] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 160.155060] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5
- [ 160.159937] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 160.191812] nouveau 0000:00:10.0: DRM: allocated 1024x768 fb: 0x9000, bo df0e6000
- [ 160.213784] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 160.213790] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 160.229445] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 160.229448] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 160.318938] Console: switching to colour frame buffer device 128x48
- [ 160.321003] nouveau 0000:00:10.0: fb0: nouveaufb frame buffer device
- [ 160.321019] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:10.0 on minor 0
- [ 220.399269] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 220.399285] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 221.044987] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 221.045004] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 221.060661] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 221.060668] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 225.910801] ata1: lost interrupt (Status 0x58)
- [ 225.956616] ata1: drained 65536 bytes to clear DRQ
- [ 225.956654] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 225.956664] ata1.00: failed command: READ DMA
- [ 225.956676] ata1.00: cmd c8/00:08:30:00:04/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 225.956676] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 225.956682] ata1.00: status: { DRDY }
- [ 226.563055] ata1.00: configured for UDMA/100
- [ 226.563085] ata1: EH complete
- [ 256.897132] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 256.897147] ata1.00: failed command: READ DMA
- [ 256.897160] ata1.00: cmd c8/00:08:30:00:04/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 256.897160] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 256.897166] ata1.00: status: { DRDY }
- [ 261.934906] ata1.00: qc timeout (cmd 0xec)
- [ 261.934918] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 261.934923] ata1.00: revalidation failed (errno=-5)
- [ 266.978778] ata1: link is slow to respond, please be patient (ready=0)
- [ 269.330781] ata1: soft resetting link
- [ 269.503058] ata1.00: configured for UDMA/100
- [ 269.503084] ata1: EH complete
- [ 284.372762] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 284.372770] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 284.881743] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 284.881748] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 284.897399] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 284.897403] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 299.905145] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 299.905194] ata1.00: failed command: READ DMA
- [ 299.905217] ata1.00: cmd c8/00:08:30:00:04/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 299.905217] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 299.905253] ata1.00: status: { DRDY }
- [ 301.343094] ata1.00: configured for UDMA/100
- [ 301.343122] ata1: EH complete
- [ 332.097121] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 332.097154] ata1.00: failed command: READ DMA
- [ 332.097176] ata1.00: cmd c8/00:08:30:00:04/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 332.097176] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 332.097211] ata1.00: status: { DRDY }
- [ 337.134900] ata1.00: qc timeout (cmd 0xec)
- [ 337.134909] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 337.134913] ata1.00: revalidation failed (errno=-5)
- [ 342.174774] ata1: link is slow to respond, please be patient (ready=0)
- [ 347.158775] ata1: device not ready (errno=-16), forcing hardreset
- [ 347.158782] ata1: soft resetting link
- [ 352.354773] ata1: link is slow to respond, please be patient (ready=0)
- [ 357.170772] ata1: SRST failed (errno=-16)
- [ 357.170795] ata1: soft resetting link
- [ 360.082808] INFO: task systemd-udevd:126 blocked for more than 120 seconds.
- [ 360.082835] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 360.082851] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 360.082870] systemd-udevd D 0fd068ac 0 126 124 0x00002002
- [ 360.082879] Call Trace:
- [ 360.082897] [df3fba20] [c007107c] finish_task_switch+0x1b4/0x214 (unreliable)
- [ 360.082914] [df3fbae0] [c07e3784] __schedule+0x330/0x7e4
- [ 360.082919] [df3fbb20] [c07e3c78] schedule+0x40/0xa8
- [ 360.082925] [df3fbb30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 360.082932] [df3fbb90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 360.082938] [df3fbbb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 360.082944] [df3fbbc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 360.082953] [df3fbbf0] [c016b118] __lock_page+0xac/0xbc
- [ 360.082962] [df3fbc20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 360.082972] [df3fbcf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 360.082978] [df3fbd50] [c021ab58] blkdev_close+0x40/0xb0
- [ 360.082990] [df3fbd70] [c01d8f38] __fput+0xb0/0x234
- [ 360.082997] [df3fbda0] [c0066090] task_work_run+0xc8/0xf0
- [ 360.083005] [df3fbdc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 360.083010] [df3fbe00] [c004a214] do_group_exit+0x54/0xc0
- [ 360.083016] [df3fbe20] [c0056e84] get_signal+0x174/0x5ac
- [ 360.083028] [df3fbe80] [c000a220] do_signal+0x3c/0x1e4
- [ 360.083034] [df3fbf30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 360.083042] [df3fbf40] [c0017b70] do_user_signal+0x74/0xc4
- [ 360.083048] --- interrupt: c00 at 0xfd068ac
- [ 360.083048] LR = 0xff724e8
- [ 360.083054] INFO: task systemd-udevd:127 blocked for more than 120 seconds.
- [ 360.083072] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 360.083086] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 360.083104] systemd-udevd D 0fd068ac 0 127 124 0x00002002
- [ 360.083110] Call Trace:
- [ 360.083114] [df03da20] [dfb4fcc0] 0xdfb4fcc0 (unreliable)
- [ 360.083122] [df03dae0] [c07e3784] __schedule+0x330/0x7e4
- [ 360.083128] [df03db20] [c07e3c78] schedule+0x40/0xa8
- [ 360.083133] [df03db30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 360.083139] [df03db90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 360.083145] [df03dbb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 360.083151] [df03dbc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 360.083156] [df03dbf0] [c016b118] __lock_page+0xac/0xbc
- [ 360.083162] [df03dc20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 360.083168] [df03dcf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 360.083174] [df03dd50] [c021ab58] blkdev_close+0x40/0xb0
- [ 360.083180] [df03dd70] [c01d8f38] __fput+0xb0/0x234
- [ 360.083185] [df03dda0] [c0066090] task_work_run+0xc8/0xf0
- [ 360.083191] [df03ddc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 360.083196] [df03de00] [c004a214] do_group_exit+0x54/0xc0
- [ 360.083201] [df03de20] [c0056e84] get_signal+0x174/0x5ac
- [ 360.083207] [df03de80] [c000a220] do_signal+0x3c/0x1e4
- [ 360.083213] [df03df30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 360.083219] [df03df40] [c0017b70] do_user_signal+0x74/0xc4
- [ 360.083224] --- interrupt: c00 at 0xfd068ac
- [ 360.083224] LR = 0xff724e8
- [ 360.083230] INFO: task systemd-udevd:128 blocked for more than 120 seconds.
- [ 360.083245] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 360.083259] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 360.083276] systemd-udevd D 0fd068ac 0 128 124 0x00002002
- [ 360.083282] Call Trace:
- [ 360.083288] [df03fa20] [c007107c] finish_task_switch+0x1b4/0x214 (unreliable)
- [ 360.083295] [df03fae0] [c07e3784] __schedule+0x330/0x7e4
- [ 360.083301] [df03fb20] [c07e3c78] schedule+0x40/0xa8
- [ 360.083306] [df03fb30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 360.083312] [df03fb90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 360.083318] [df03fbb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 360.083324] [df03fbc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 360.083330] [df03fbf0] [c016b118] __lock_page+0xac/0xbc
- [ 360.083336] [df03fc20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 360.083342] [df03fcf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 360.083347] [df03fd50] [c021ab58] blkdev_close+0x40/0xb0
- [ 360.083354] [df03fd70] [c01d8f38] __fput+0xb0/0x234
- [ 360.083359] [df03fda0] [c0066090] task_work_run+0xc8/0xf0
- [ 360.083364] [df03fdc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 360.083370] [df03fe00] [c004a214] do_group_exit+0x54/0xc0
- [ 360.083375] [df03fe20] [c0056e84] get_signal+0x174/0x5ac
- [ 360.083381] [df03fe80] [c000a220] do_signal+0x3c/0x1e4
- [ 360.083387] [df03ff30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 360.083393] [df03ff40] [c0017b70] do_user_signal+0x74/0xc4
- [ 360.083398] --- interrupt: c00 at 0xfd068ac
- [ 360.083398] LR = 0xff724e8
- [ 360.083404] INFO: task systemd-udevd:130 blocked for more than 120 seconds.
- [ 360.083419] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 360.083433] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 360.083448] systemd-udevd D 0fd068ac 0 130 124 0x00002002
- [ 360.083455] Call Trace:
- [ 360.083462] [df061a20] [c0074628] check_preempt_curr+0xc8/0xd0 (unreliable)
- [ 360.083469] [df061ae0] [c07e3784] __schedule+0x330/0x7e4
- [ 360.083475] [df061b20] [c07e3c78] schedule+0x40/0xa8
- [ 360.083480] [df061b30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 360.083486] [df061b90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 360.083492] [df061bb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 360.083498] [df061bc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 360.083504] [df061bf0] [c016b118] __lock_page+0xac/0xbc
- [ 360.083510] [df061c20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 360.083516] [df061cf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 360.083521] [df061d50] [c021ab58] blkdev_close+0x40/0xb0
- [ 360.083527] [df061d70] [c01d8f38] __fput+0xb0/0x234
- [ 360.083533] [df061da0] [c0066090] task_work_run+0xc8/0xf0
- [ 360.083538] [df061dc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 360.083543] [df061e00] [c004a214] do_group_exit+0x54/0xc0
- [ 360.083548] [df061e20] [c0056e84] get_signal+0x174/0x5ac
- [ 360.083555] [df061e80] [c000a220] do_signal+0x3c/0x1e4
- [ 360.083561] [df061f30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 360.083566] [df061f40] [c0017b70] do_user_signal+0x74/0xc4
- [ 360.083571] --- interrupt: c00 at 0xfd068ac
- [ 360.083571] LR = 0xff724e8
- [ 360.083582] INFO: task init:239 blocked for more than 120 seconds.
- [ 360.083596] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 360.083610] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 360.083627] init D 0ff40428 0 239 238 0x00000000
- [ 360.083634] Call Trace:
- [ 360.083639] [df3fdb20] [c07e3784] __schedule+0x330/0x7e4
- [ 360.083645] [df3fdb60] [c07e3c78] schedule+0x40/0xa8
- [ 360.083650] [df3fdb70] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 360.083656] [df3fdbd0] [c07e487c] wait_for_common+0xd4/0x18c
- [ 360.083668] [df3fdc10] [c00611d0] flush_work+0xf0/0x1b8
- [ 360.083674] [df3fdc60] [c0061b74] __cancel_work_timer+0xa8/0x1ac
- [ 360.083681] [df3fdcb0] [c03c0730] disk_block_events+0x88/0xb4
- [ 360.083687] [df3fdcd0] [c021a080] __blkdev_get+0x128/0x448
- [ 360.083692] [df3fdd10] [c021a548] blkdev_get+0x1a8/0x354
- [ 360.083698] [df3fdd70] [c01d4fd8] do_dentry_open+0x240/0x370
- [ 360.083710] [df3fdda0] [c01e60c4] do_last+0x130/0xcfc
- [ 360.083716] [df3fde10] [c01e6d10] path_openat+0x80/0x2fc
- [ 360.083722] [df3fde50] [c01e86c8] do_filp_open+0x64/0xc4
- [ 360.083728] [df3fdef0] [c01d6318] do_sys_open+0x15c/0x2c0
- [ 360.083734] [df3fdf40] [c00172a4] ret_from_syscall+0x0/0x38
- [ 360.083739] --- interrupt: c01 at 0xff40428
- [ 360.083739] LR = 0xff403dc
- [ 362.502795] ata1.00: qc timeout (cmd 0x27)
- [ 362.502804] ata1.00: failed to read native max address (err_mask=0x4)
- [ 362.502808] ata1.00: HPA support seems broken, skipping HPA handling
- [ 362.502813] ata1.00: revalidation failed (errno=-5)
- [ 367.542774] ata1: link is slow to respond, please be patient (ready=0)
- [ 372.526776] ata1: device not ready (errno=-16), forcing hardreset
- [ 372.526784] ata1: soft resetting link
- [ 377.722773] ata1: link is slow to respond, please be patient (ready=0)
- [ 382.538772] ata1: SRST failed (errno=-16)
- [ 382.538794] ata1: soft resetting link
- [ 387.734773] ata1: link is slow to respond, please be patient (ready=0)
- [ 392.550774] ata1: SRST failed (errno=-16)
- [ 392.550793] ata1: soft resetting link
- [ 397.746773] ata1: link is slow to respond, please be patient (ready=0)
- [ 409.578956] ata1.00: configured for UDMA/100
- [ 409.578982] ata1: EH complete
- [ 440.065120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 440.065149] ata1.00: failed command: READ DMA
- [ 440.065170] ata1.00: cmd c8/00:08:30:00:04/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 440.065170] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 440.065207] ata1.00: status: { DRDY }
- [ 445.102896] ata1.00: qc timeout (cmd 0xec)
- [ 445.102904] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 445.102908] ata1.00: revalidation failed (errno=-5)
- [ 450.142773] ata1: link is slow to respond, please be patient (ready=0)
- [ 455.130781] ata1: device not ready (errno=-16), forcing hardreset
- [ 455.130788] ata1: soft resetting link
- [ 460.326774] ata1: link is slow to respond, please be patient (ready=0)
- [ 460.678958] ata1.00: configured for UDMA/100
- [ 460.678978] ata1: EH complete
- [ 480.082803] INFO: task systemd-udevd:126 blocked for more than 120 seconds.
- [ 480.082833] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 480.082848] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 480.082868] systemd-udevd D 0fd068ac 0 126 124 0x00002002
- [ 480.082877] Call Trace:
- [ 480.082891] [df3fba20] [c007107c] finish_task_switch+0x1b4/0x214 (unreliable)
- [ 480.082904] [df3fbae0] [c07e3784] __schedule+0x330/0x7e4
- [ 480.082910] [df3fbb20] [c07e3c78] schedule+0x40/0xa8
- [ 480.082916] [df3fbb30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 480.082922] [df3fbb90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 480.082928] [df3fbbb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 480.082934] [df3fbbc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 480.082943] [df3fbbf0] [c016b118] __lock_page+0xac/0xbc
- [ 480.082950] [df3fbc20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 480.082958] [df3fbcf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 480.082964] [df3fbd50] [c021ab58] blkdev_close+0x40/0xb0
- [ 480.082975] [df3fbd70] [c01d8f38] __fput+0xb0/0x234
- [ 480.082982] [df3fbda0] [c0066090] task_work_run+0xc8/0xf0
- [ 480.082988] [df3fbdc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 480.082994] [df3fbe00] [c004a214] do_group_exit+0x54/0xc0
- [ 480.083000] [df3fbe20] [c0056e84] get_signal+0x174/0x5ac
- [ 480.083009] [df3fbe80] [c000a220] do_signal+0x3c/0x1e4
- [ 480.083015] [df3fbf30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 480.083022] [df3fbf40] [c0017b70] do_user_signal+0x74/0xc4
- [ 480.083028] --- interrupt: c00 at 0xfd068ac
- [ 480.083028] LR = 0xff724e8
- [ 480.083033] INFO: task systemd-udevd:127 blocked for more than 120 seconds.
- [ 480.083051] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 480.083066] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 480.083084] systemd-udevd D 0fd068ac 0 127 124 0x00002002
- [ 480.083090] Call Trace:
- [ 480.083094] [df03da20] [dfb4fcc0] 0xdfb4fcc0 (unreliable)
- [ 480.083102] [df03dae0] [c07e3784] __schedule+0x330/0x7e4
- [ 480.083107] [df03db20] [c07e3c78] schedule+0x40/0xa8
- [ 480.083113] [df03db30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 480.083118] [df03db90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 480.083124] [df03dbb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 480.083130] [df03dbc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 480.083136] [df03dbf0] [c016b118] __lock_page+0xac/0xbc
- [ 480.083142] [df03dc20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 480.083147] [df03dcf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 480.083153] [df03dd50] [c021ab58] blkdev_close+0x40/0xb0
- [ 480.083159] [df03dd70] [c01d8f38] __fput+0xb0/0x234
- [ 480.083165] [df03dda0] [c0066090] task_work_run+0xc8/0xf0
- [ 480.083170] [df03ddc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 480.083175] [df03de00] [c004a214] do_group_exit+0x54/0xc0
- [ 480.083181] [df03de20] [c0056e84] get_signal+0x174/0x5ac
- [ 480.083187] [df03de80] [c000a220] do_signal+0x3c/0x1e4
- [ 480.083193] [df03df30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 480.083198] [df03df40] [c0017b70] do_user_signal+0x74/0xc4
- [ 480.083204] --- interrupt: c00 at 0xfd068ac
- [ 480.083204] LR = 0xff724e8
- [ 480.083209] INFO: task systemd-udevd:128 blocked for more than 120 seconds.
- [ 480.083225] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 480.083239] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 480.083255] systemd-udevd D 0fd068ac 0 128 124 0x00002002
- [ 480.083262] Call Trace:
- [ 480.083268] [df03fa20] [c007107c] finish_task_switch+0x1b4/0x214 (unreliable)
- [ 480.083275] [df03fae0] [c07e3784] __schedule+0x330/0x7e4
- [ 480.083281] [df03fb20] [c07e3c78] schedule+0x40/0xa8
- [ 480.083286] [df03fb30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 480.083292] [df03fb90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 480.083298] [df03fbb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 480.083304] [df03fbc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 480.083310] [df03fbf0] [c016b118] __lock_page+0xac/0xbc
- [ 480.083316] [df03fc20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 480.083322] [df03fcf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 480.083327] [df03fd50] [c021ab58] blkdev_close+0x40/0xb0
- [ 480.083333] [df03fd70] [c01d8f38] __fput+0xb0/0x234
- [ 480.083339] [df03fda0] [c0066090] task_work_run+0xc8/0xf0
- [ 480.083344] [df03fdc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 480.083350] [df03fe00] [c004a214] do_group_exit+0x54/0xc0
- [ 480.083355] [df03fe20] [c0056e84] get_signal+0x174/0x5ac
- [ 480.083361] [df03fe80] [c000a220] do_signal+0x3c/0x1e4
- [ 480.083367] [df03ff30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 480.083372] [df03ff40] [c0017b70] do_user_signal+0x74/0xc4
- [ 480.083377] --- interrupt: c00 at 0xfd068ac
- [ 480.083377] LR = 0xff724e8
- [ 480.083383] INFO: task systemd-udevd:130 blocked for more than 120 seconds.
- [ 480.083399] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 480.083413] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 480.084086] systemd-udevd D 0fd068ac 0 130 124 0x00002002
- [ 480.084093] Call Trace:
- [ 480.084100] [df061a20] [c0074628] check_preempt_curr+0xc8/0xd0 (unreliable)
- [ 480.084109] [df061ae0] [c07e3784] __schedule+0x330/0x7e4
- [ 480.084115] [df061b20] [c07e3c78] schedule+0x40/0xa8
- [ 480.084120] [df061b30] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 480.084126] [df061b90] [c07e33f0] io_schedule_timeout+0xb8/0x11c
- [ 480.084132] [df061bb0] [c07e45f0] bit_wait_io+0x2c/0x7c
- [ 480.084138] [df061bc0] [c07e43a8] __wait_on_bit_lock+0xac/0x13c
- [ 480.084144] [df061bf0] [c016b118] __lock_page+0xac/0xbc
- [ 480.084150] [df061c20] [c017d140] truncate_inode_pages_range+0x5f4/0x5f8
- [ 480.084156] [df061cf0] [c0219d34] __blkdev_put+0xb4/0x2d8
- [ 480.084161] [df061d50] [c021ab58] blkdev_close+0x40/0xb0
- [ 480.084168] [df061d70] [c01d8f38] __fput+0xb0/0x234
- [ 480.084174] [df061da0] [c0066090] task_work_run+0xc8/0xf0
- [ 480.084179] [df061dc0] [c0049a28] do_exit+0x2d0/0xa14
- [ 480.084185] [df061e00] [c004a214] do_group_exit+0x54/0xc0
- [ 480.084190] [df061e20] [c0056e84] get_signal+0x174/0x5ac
- [ 480.084197] [df061e80] [c000a220] do_signal+0x3c/0x1e4
- [ 480.084203] [df061f30] [c000a4f8] do_notify_resume+0x98/0xac
- [ 480.084208] [df061f40] [c0017b70] do_user_signal+0x74/0xc4
- [ 480.084213] --- interrupt: c00 at 0xfd068ac
- [ 480.084213] LR = 0xff724e8
- [ 480.084223] INFO: task init:239 blocked for more than 120 seconds.
- [ 480.084878] Not tainted 4.4.0-31-powerpc-smp #50~14.04.1-Ubuntu
- [ 480.085525] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 480.086171] init D 0ff40428 0 239 238 0x00000000
- [ 480.086178] Call Trace:
- [ 480.086184] [df3fdb20] [c07e3784] __schedule+0x330/0x7e4
- [ 480.086189] [df3fdb60] [c07e3c78] schedule+0x40/0xa8
- [ 480.086195] [df3fdb70] [c07e6aa4] schedule_timeout+0x224/0x288
- [ 480.086201] [df3fdbd0] [c07e487c] wait_for_common+0xd4/0x18c
- [ 480.086210] [df3fdc10] [c00611d0] flush_work+0xf0/0x1b8
- [ 480.086217] [df3fdc60] [c0061b74] __cancel_work_timer+0xa8/0x1ac
- [ 480.086223] [df3fdcb0] [c03c0730] disk_block_events+0x88/0xb4
- [ 480.086229] [df3fdcd0] [c021a080] __blkdev_get+0x128/0x448
- [ 480.086235] [df3fdd10] [c021a548] blkdev_get+0x1a8/0x354
- [ 480.086241] [df3fdd70] [c01d4fd8] do_dentry_open+0x240/0x370
- [ 480.086251] [df3fdda0] [c01e60c4] do_last+0x130/0xcfc
- [ 480.086257] [df3fde10] [c01e6d10] path_openat+0x80/0x2fc
- [ 480.086263] [df3fde50] [c01e86c8] do_filp_open+0x64/0xc4
- [ 480.086269] [df3fdef0] [c01d6318] do_sys_open+0x15c/0x2c0
- [ 480.086275] [df3fdf40] [c00172a4] ret_from_syscall+0x0/0x38
- [ 480.086280] --- interrupt: c01 at 0xff40428
- [ 480.086280] LR = 0xff403dc
- [ 491.073131] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 491.073811] ata1.00: failed command: READ DMA
- [ 491.074454] ata1.00: cmd c8/00:08:30:00:04/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 491.074454] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 491.075751] ata1.00: status: { DRDY }
- [ 496.114898] ata1.00: qc timeout (cmd 0xec)
- [ 496.114907] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 496.114912] ata1.00: revalidation failed (errno=-5)
- [ 501.154776] ata1: link is slow to respond, please be patient (ready=0)
- [ 506.138774] ata1: device not ready (errno=-16), forcing hardreset
- [ 506.138782] ata1: soft resetting link
- [ 511.334773] ata1: link is slow to respond, please be patient (ready=0)
- [ 516.150772] ata1: SRST failed (errno=-16)
- [ 516.151425] ata1: soft resetting link
- [ 521.346774] ata1: link is slow to respond, please be patient (ready=0)
- [ 526.162773] ata1: SRST failed (errno=-16)
- [ 526.163420] ata1: soft resetting link
- [ 531.358774] ata1: link is slow to respond, please be patient (ready=0)
- [ 545.102954] ata1.00: configured for UDMA/100
- [ 545.102988] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 545.102997] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [descriptor]
- [ 545.103008] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command
- [ 545.103018] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 04 00 30 00 00 08 00
- [ 545.103023] blk_update_request: I/O error, dev sda, sector 262192
- [ 545.103704] ata1: EH complete
- [ 576.129142] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 576.129844] ata1.00: failed command: READ DMA
- [ 576.130483] ata1.00: cmd c8/00:08:90:f8:50/00:00:00:00:00/e9 tag 0 dma 4096 in
- [ 576.130483] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 576.131772] ata1.00: status: { DRDY }
- [ 581.170899] ata1.00: qc timeout (cmd 0xec)
- [ 581.170910] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 581.170915] ata1.00: revalidation failed (errno=-5)
- [ 586.210776] ata1: link is slow to respond, please be patient (ready=0)
- [ 591.194773] ata1: device not ready (errno=-16), forcing hardreset
- [ 591.194782] ata1: soft resetting link
- [ 596.390773] ata1: link is slow to respond, please be patient (ready=0)
- [ 599.990955] ata1.00: configured for UDMA/100
- [ 599.990981] ata1: EH complete
- [ 630.081121] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 630.081795] ata1.00: failed command: READ DMA
- [ 630.082437] ata1.00: cmd c8/00:08:90:f8:50/00:00:00:00:00/e9 tag 0 dma 4096 in
- [ 630.082437] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 630.083730] ata1.00: status: { DRDY }
- [ 635.122899] ata1.00: qc timeout (cmd 0xec)
- [ 635.122907] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 635.122912] ata1.00: revalidation failed (errno=-5)
- [ 640.162775] ata1: link is slow to respond, please be patient (ready=0)
- [ 645.146774] ata1: device not ready (errno=-16), forcing hardreset
- [ 645.146783] ata1: soft resetting link
- [ 650.342773] ata1: link is slow to respond, please be patient (ready=0)
- [ 655.158772] ata1: SRST failed (errno=-16)
- [ 655.159434] ata1: soft resetting link
- [ 660.354774] ata1: link is slow to respond, please be patient (ready=0)
- [ 665.170773] ata1: SRST failed (errno=-16)
- [ 665.171425] ata1: soft resetting link
- [ 670.366774] ata1: link is slow to respond, please be patient (ready=0)
- [ 685.622952] ata1.00: configured for UDMA/100
- [ 685.622977] ata1: EH complete
- [ 716.097120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 716.097778] ata1.00: failed command: READ DMA
- [ 716.098417] ata1.00: cmd c8/00:08:90:f8:50/00:00:00:00:00/e9 tag 0 dma 4096 in
- [ 716.098417] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x20 (host bus error)
- [ 716.099713] ata1.00: status: { DRDY }
- [ 721.138901] ata1.00: qc timeout (cmd 0xec)
- [ 721.138910] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
- [ 721.138915] ata1.00: revalidation failed (errno=-5)
- [ 726.178776] ata1: link is slow to respond, please be patient (ready=0)
- [ 731.162774] ata1: device not ready (errno=-16), forcing hardreset
- [ 731.162782] ata1: soft resetting link
- [ 736.358774] ata1: link is slow to respond, please be patient (ready=0)
- [ 741.174772] ata1: SRST failed (errno=-16)
- [ 741.175435] ata1: soft resetting link
- [ 746.370776] ata1: link is slow to respond, please be patient (ready=0)
- [ 751.186772] ata1: SRST failed (errno=-16)
- [ 751.187423] ata1: soft resetting link
- [ 756.382773] ata1: link is slow to respond, please be patient (ready=0)
- [ 786.230773] ata1: SRST failed (errno=-16)
- [ 786.231413] ata1: soft resetting link
- [ 791.258775] ata1: SRST failed (errno=-16)
- [ 791.269891] ata1: reset failed, giving up
- [ 791.270501] ata1.00: disabled
- [ 791.270540] ata1: EH complete
- [ 791.270589] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.270600] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 09 50 f8 90 00 00 08 00
- [ 791.270607] blk_update_request: I/O error, dev sda, sector 156301456
- [ 791.274825] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.274837] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 09 50 f8 ae 00 00 02 00
- [ 791.274842] blk_update_request: I/O error, dev sda, sector 156301486
- [ 791.278569] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.278578] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 19 00 00 08 00
- [ 791.278583] blk_update_request: I/O error, dev sda, sector 25
- [ 791.283197] sd 0:0:0:0: [sda] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.283209] sd 0:0:0:0: [sda] Sense not available.
- [ 791.283236] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.283245] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 03 18 00 00 08 00
- [ 791.283251] blk_update_request: I/O error, dev sda, sector 792
- [ 791.286720] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.286729] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 03 18 00 00 08 00
- [ 791.286733] blk_update_request: I/O error, dev sda, sector 792
- [ 791.290014] Buffer I/O error on dev sda, logical block 99, async page read
- [ 791.293456] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.293465] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 00 00 00 08 00
- [ 791.293470] blk_update_request: I/O error, dev sda, sector 512
- [ 791.296823] sd 0:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.296831] sd 0:0:0:0: [sda] Sense not available.
- [ 791.296857] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.296865] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 00 00 00 08 00
- [ 791.296869] blk_update_request: I/O error, dev sda, sector 512
- [ 791.300034] Buffer I/O error on dev sda, logical block 64, async page read
- [ 791.303332] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.303339] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 20 00 00 08 00
- [ 791.303344] blk_update_request: I/O error, dev sda, sector 32
- [ 791.306545] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.306552] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 20 00 00 08 00
- [ 791.306557] blk_update_request: I/O error, dev sda, sector 32
- [ 791.309612] Buffer I/O error on dev sda, logical block 4, async page read
- [ 791.312786] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 791.312794] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 791.312799] blk_update_request: I/O error, dev sda, sector 4096
- [ 791.315848] Buffer I/O error on dev sda, logical block 512, async page read
- [ 791.321158] sda: detected capacity change from 80026361856 to 0
- [ 791.779175] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
- [ 799.147206] ISO 9660 Extensions: RRIP_1991A
- [ 857.811465] Adding 678664k swap on /dev/sdb4. Priority:-1 extents:1 across:678664k FS
- [ 860.818078] systemd-udevd[1198]: starting version 204
- [ 865.797971] lp: driver loaded but no devices found
- [ 866.342892] ppdev: user-space parallel port driver
- [ 867.931167] Bluetooth: Core ver 2.21
- [ 867.933126] NET: Registered protocol family 31
- [ 867.933133] Bluetooth: HCI device and connection manager initialized
- [ 867.933148] Bluetooth: HCI socket layer initialized
- [ 867.933156] Bluetooth: L2CAP socket layer initialized
- [ 867.933183] Bluetooth: SCO socket layer initialized
- [ 868.560796] Bluetooth: RFCOMM TTY layer initialized
- [ 868.560824] Bluetooth: RFCOMM socket layer initialized
- [ 868.560849] Bluetooth: RFCOMM ver 1.11
- [ 869.210812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 869.210827] Bluetooth: BNEP filters: protocol multicast
- [ 869.210844] Bluetooth: BNEP socket layer initialized
- [ 873.255058] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
- [ 874.908513] usb 2-1: USB disconnect, device number 2
- [ 874.914842] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
- [ 875.246300] device-mapper: multipath: version 1.10.0 loaded
- [ 875.274885] usb 2-1: new full-speed USB device number 4 using ohci-pci
- [ 875.689902] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
- [ 875.689919] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 876.509879] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input5
- [ 876.518574] usbcore: registered new interface driver appletouch
- [ 878.712784] input: Macintosh mouse button emulation as /devices/virtual/input/input6
- [ 878.890653] init: failsafe main process (1397) killed by TERM signal
- [ 880.363536] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
- [ 880.615870] usbcore: registered new interface driver btusb
- [ 880.952514] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
- [ 882.392903] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
- [ 882.402858] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
- [ 882.402885] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
- [ 882.415594] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
- [ 882.415656] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
- [ 882.415738] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
- [ 882.415772] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
- [ 882.415779] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
- [ 882.416293] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
- [ 882.416734] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
- [ 882.417913] Broadcom 43xx driver loaded [ Features: PNL ]
- [ 886.221926] zram: Added device: zram0
- [ 887.493747] zram0: detected capacity change from 0 to 258666496
- [ 887.697045] Adding 252600k swap on /dev/zram0. Priority:5 extents:1 across:252600k SSFS
- [ 893.495198] sungem_phy: PHY ID: 4061e4, addr: 0
- [ 893.495558] gem 0002:20:0f.0 eth0: Found BCM5221 PHY
- [ 893.496019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 897.844275] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 897.844295] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 898.355677] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 898.355692] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 898.371351] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 898.371357] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 900.002586] init: plymouth-upstart-bridge main process ended, respawning
- [ 900.067243] init: plymouth-upstart-bridge main process (2267) terminated with status 1
- [ 900.067308] init: plymouth-upstart-bridge main process ended, respawning
- [ 948.847997] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
- [ 1003.058926] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
- [ 1003.059066] gem 0002:20:0f.0 eth0: Pause is disabled
- [ 1003.059830] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 1613.433817] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 1613.433914] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 1613.433974] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 1613.434224] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 1613.434845] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 1613.434925] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 1613.434983] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [ 2463.327397] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 2463.327423] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 2820.974950] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 2820.974973] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 2820.990638] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 2820.990650] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 3848.392887] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 3848.392915] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 3929.287132] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 3929.287160] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 3929.302868] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 3929.302880] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 4083.098558] usb 4-1: new full-speed USB device number 2 using ohci-pci
- [ 4083.319606] usb 4-1: New USB device found, idVendor=046d, idProduct=c534
- [ 4083.319624] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4083.319633] usb 4-1: Product: USB Receiver
- [ 4083.319642] usb 4-1: Manufacturer: Logitech
- [ 4083.333979] input: Logitech USB Receiver as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/0003:046D:C534.0003/input/input7
- [ 4083.387590] hid-generic 0003:046D:C534.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0001:10:1b.1-1/input0
- [ 4083.397526] input: Logitech USB Receiver as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.1/0003:046D:C534.0004/input/input8
- [ 4083.451387] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0001:10:1b.1-1/input1
- [ 7446.582791] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 7446.582820] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 7556.807945] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 7556.807970] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 7556.823639] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 7556.823651] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [10665.630706] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10665.632272] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10665.632413] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10665.640400] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10665.644874] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10665.645101] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10665.646064] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.763053] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.763152] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.763213] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.771342] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.773183] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.773436] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.773548] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.774715] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.775282] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.779616] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [10745.783877] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
- [/code][/spoiler]
- [SPOILER="dmesg mit Lesefehlern"][code]
- [ 20.586223] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:10.0 on minor 0
- [ 20.948303] scsi 2:0:0:0: Direct-Access Intenso Micro Line 1100 PQ: 0 ANSI: 4
- [ 20.950632] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 20.952306] sd 2:0:0:0: [sdb] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB)
- [ 20.953997] sd 2:0:0:0: [sdb] Write Protect is off
- [ 20.954011] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
- [ 20.955744] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 20.966364] sdb: sdb1
- [ 20.972366] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 26.338222] random: nonblocking pool is initialized
- [ 53.276238] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 53.276280] ata1.00: BMDMA stat 0x4
- [ 53.276300] ata1.00: failed command: READ DMA
- [ 53.276328] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 53.276371] ata1.00: status: { DRDY ERR }
- [ 53.276387] ata1.00: error: { UNC }
- [ 53.364519] ata1.00: configured for UDMA/100
- [ 53.364563] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 53.364574] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 53.364585] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 53.364596] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 53.364603] blk_update_request: I/O error, dev sda, sector 273
- [ 53.364671] ata1: EH complete
- [ 58.936217] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 58.936246] ata1.00: BMDMA stat 0x4
- [ 58.936263] ata1.00: failed command: READ DMA
- [ 58.936288] ata1.00: cmd c8/00:08:10:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 58.936326] ata1.00: status: { DRDY ERR }
- [ 58.936343] ata1.00: error: { UNC }
- [ 58.960517] ata1.00: configured for UDMA/100
- [ 58.960543] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 58.960551] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 58.960560] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 58.960568] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 08 00
- [ 58.960573] blk_update_request: I/O error, dev sda, sector 273
- [ 58.960600] Buffer I/O error on dev sda, logical block 34, async page read
- [ 58.960642] ata1: EH complete
- [ 64.532230] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 64.532266] ata1.00: BMDMA stat 0x4
- [ 64.532286] ata1.00: failed command: READ DMA
- [ 64.532312] ata1.00: cmd c8/00:08:10:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 64.532352] ata1.00: status: { DRDY ERR }
- [ 64.532369] ata1.00: error: { UNC }
- [ 64.556525] ata1.00: configured for UDMA/100
- [ 64.556562] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 64.556572] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 64.556582] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 64.556592] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 08 00
- [ 64.556598] blk_update_request: I/O error, dev sda, sector 273
- [ 64.556627] Buffer I/O error on dev sda, logical block 34, async page read
- [ 64.556682] ata1: EH complete
- [ 72.024217] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 72.024246] ata1.00: BMDMA stat 0x4
- [ 72.024263] ata1.00: failed command: READ DMA
- [ 72.024288] ata1.00: cmd c8/00:08:00:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:01:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 72.024326] ata1.00: status: { DRDY ERR }
- [ 72.024343] ata1.00: error: { UNC }
- [ 72.112522] ata1.00: configured for UDMA/100
- [ 72.112547] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 72.112556] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 72.112565] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 72.112574] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 00 00 00 08 00
- [ 72.112580] blk_update_request: I/O error, dev sda, sector 513
- [ 72.112626] ata1: EH complete
- [ 77.672212] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 77.672238] ata1.00: BMDMA stat 0x4
- [ 77.672254] ata1.00: failed command: READ DMA
- [ 77.672279] ata1.00: cmd c8/00:08:00:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:01:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 77.672316] ata1.00: status: { DRDY ERR }
- [ 77.672332] ata1.00: error: { UNC }
- [ 77.712519] ata1.00: configured for UDMA/100
- [ 77.712541] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 77.712549] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 77.712557] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 77.712566] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 00 00 00 08 00
- [ 77.712571] blk_update_request: I/O error, dev sda, sector 513
- [ 77.712595] Buffer I/O error on dev sda, logical block 64, async page read
- [ 77.712637] ata1: EH complete
- [ 85.484238] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 85.484280] ata1.00: BMDMA stat 0x4
- [ 85.484300] ata1.00: failed command: READ DMA
- [ 85.484328] ata1.00: cmd c8/00:08:40:08:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:08:40:08:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 85.485778] ata1.00: status: { DRDY ERR }
- [ 85.486481] ata1.00: error: { UNC }
- [ 85.572520] ata1.00: configured for UDMA/100
- [ 85.572562] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 85.572573] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 85.572584] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 85.572594] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 08 40 00 00 08 00
- [ 85.572601] blk_update_request: I/O error, dev sda, sector 2112
- [ 85.573364] ata1: EH complete
- [ 95.788225] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 95.788955] ata1.00: BMDMA stat 0x4
- [ 95.789663] ata1.00: failed command: READ DMA
- [ 95.790377] ata1.00: cmd c8/00:08:40:08:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:42:08:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 95.791784] ata1.00: status: { DRDY ERR }
- [ 95.792506] ata1.00: error: { UNC }
- [ 95.872541] ata1.00: configured for UDMA/100
- [ 95.872570] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 95.872579] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 95.872588] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 95.872596] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 08 40 00 00 08 00
- [ 95.872602] blk_update_request: I/O error, dev sda, sector 2114
- [ 95.873323] Buffer I/O error on dev sda2, logical block 256, async page read
- [ 95.874058] ata1: EH complete
- [ 96.927342] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 96.927365] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 97.436202] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 97.436211] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 97.451867] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 97.451874] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 110.240241] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 110.240258] ata1.00: BMDMA stat 0x4
- [ 110.240266] ata1.00: failed command: READ DMA
- [ 110.240280] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 110.240287] ata1.00: status: { DRDY ERR }
- [ 110.240292] ata1.00: error: { UNC }
- [ 110.264564] ata1.00: configured for UDMA/100
- [ 110.264609] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 110.264620] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 110.264631] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 110.264641] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 110.264648] blk_update_request: I/O error, dev sda, sector 273
- [ 110.264694] ata1: EH complete
- [ 115.844223] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 115.844233] ata1.00: BMDMA stat 0x4
- [ 115.844240] ata1.00: failed command: READ DMA
- [ 115.844253] ata1.00: cmd c8/00:08:10:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 115.844260] ata1.00: status: { DRDY ERR }
- [ 115.844265] ata1.00: error: { UNC }
- [ 115.884520] ata1.00: configured for UDMA/100
- [ 115.884549] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 115.884557] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 115.884566] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 115.884574] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 08 00
- [ 115.884580] blk_update_request: I/O error, dev sda, sector 273
- [ 115.884588] Buffer I/O error on dev sda, logical block 34, async page read
- [ 115.884618] ata1: EH complete
- [ 121.452233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 121.452246] ata1.00: BMDMA stat 0x4
- [ 121.452254] ata1.00: failed command: READ DMA
- [ 121.452267] ata1.00: cmd c8/00:08:10:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 121.452274] ata1.00: status: { DRDY ERR }
- [ 121.452279] ata1.00: error: { UNC }
- [ 121.476519] ata1.00: configured for UDMA/100
- [ 121.476558] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 121.476568] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 121.476577] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 121.476588] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 08 00
- [ 121.476594] blk_update_request: I/O error, dev sda, sector 273
- [ 121.476601] Buffer I/O error on dev sda, logical block 34, async page read
- [ 121.476640] ata1: EH complete
- [ 133.497078] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 133.497086] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 134.005934] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 134.005939] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 134.021592] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 134.021596] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 144.676234] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 144.676989] ata1.00: BMDMA stat 0x4
- [ 144.677704] ata1.00: failed command: READ DMA
- [ 144.678420] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:02:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 144.679833] ata1.00: status: { DRDY ERR }
- [ 144.680565] ata1.00: error: { UNC }
- [ 144.760552] ata1.00: configured for UDMA/100
- [ 144.760592] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 144.760602] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 144.760613] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 144.760624] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 144.760630] blk_update_request: I/O error, dev sda, sector 4098
- [ 144.761386] ata1: EH complete
- [ 150.480216] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 150.480949] ata1.00: BMDMA stat 0x4
- [ 150.481660] ata1.00: failed command: READ DMA
- [ 150.482379] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:02:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 150.483796] ata1.00: status: { DRDY ERR }
- [ 150.484524] ata1.00: error: { UNC }
- [ 150.524515] ata1.00: configured for UDMA/100
- [ 150.524542] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 150.524550] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 150.524559] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 150.524567] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 150.524573] blk_update_request: I/O error, dev sda, sector 4098
- [ 150.525297] Buffer I/O error on dev sda, logical block 512, async page read
- [ 150.526037] ata1: EH complete
- [ 163.112244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 163.113025] ata1.00: BMDMA stat 0x4
- [ 163.113736] ata1.00: failed command: READ DMA
- [ 163.114456] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:11:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 163.115881] ata1.00: status: { DRDY ERR }
- [ 163.116628] ata1.00: error: { UNC }
- [ 163.156529] ata1.00: configured for UDMA/100
- [ 163.156575] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 163.156586] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 163.156597] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 163.156608] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 163.156614] blk_update_request: I/O error, dev sda, sector 273
- [ 163.157396] ata1: EH complete
- [ 173.516217] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 173.516958] ata1.00: BMDMA stat 0x4
- [ 173.517674] ata1.00: failed command: READ DMA
- [ 173.518394] ata1.00: cmd c8/00:08:10:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:13:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 173.519822] ata1.00: status: { DRDY ERR }
- [ 173.520552] ata1.00: error: { UNC }
- [ 173.600515] ata1.00: configured for UDMA/100
- [ 173.600542] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 173.600551] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 173.600561] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 173.600569] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 08 00
- [ 173.600575] blk_update_request: I/O error, dev sda, sector 275
- [ 173.601305] Buffer I/O error on dev sda, logical block 34, async page read
- [ 173.602047] ata1: EH complete
- [ 179.180229] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 179.180994] ata1.00: BMDMA stat 0x4
- [ 179.181714] ata1.00: failed command: READ DMA
- [ 179.182439] ata1.00: cmd c8/00:08:10:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:13:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 179.183870] ata1.00: status: { DRDY ERR }
- [ 179.184613] ata1.00: error: { UNC }
- [ 179.208552] ata1.00: configured for UDMA/100
- [ 179.208589] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 179.208598] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 179.208608] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 179.208618] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 08 00
- [ 179.208624] blk_update_request: I/O error, dev sda, sector 275
- [ 179.209361] Buffer I/O error on dev sda, logical block 34, async page read
- [ 179.210117] ata1: EH complete
- [ 185.284221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 185.284970] ata1.00: BMDMA stat 0x4
- [ 185.285695] ata1.00: failed command: READ DMA
- [ 185.286419] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:02:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 185.287852] ata1.00: status: { DRDY ERR }
- [ 185.288587] ata1.00: error: { UNC }
- [ 185.328518] ata1.00: configured for UDMA/100
- [ 185.328547] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 185.328556] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 185.328566] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 185.328574] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 185.328580] blk_update_request: I/O error, dev sda, sector 4098
- [ 185.329334] ata1: EH complete
- [ 190.980213] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 190.980951] ata1.00: BMDMA stat 0x4
- [ 190.981670] ata1.00: failed command: READ DMA
- [ 190.982398] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:02:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 190.983831] ata1.00: status: { DRDY ERR }
- [ 190.984563] ata1.00: error: { UNC }
- [ 191.024538] ata1.00: configured for UDMA/100
- [ 191.024561] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 191.024570] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 191.024578] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 191.024587] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 191.024592] blk_update_request: I/O error, dev sda, sector 4098
- [ 191.025324] Buffer I/O error on dev sda, logical block 512, async page read
- [ 191.026069] ata1: EH complete
- [ 215.456238] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 215.457042] ata1.00: BMDMA stat 0x4
- [ 215.457773] ata1.00: failed command: READ DMA
- [ 215.458508] ata1.00: cmd c8/00:90:c0:00:00/00:00:00:00:00/e0 tag 0 dma 73728 in
- res 51/40:00:13:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 215.459960] ata1.00: status: { DRDY ERR }
- [ 215.460723] ata1.00: error: { UNC }
- [ 215.484529] ata1.00: configured for UDMA/100
- [ 215.484572] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 215.484582] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 215.484592] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 215.484603] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 c0 00 00 90 00
- [ 215.484609] blk_update_request: I/O error, dev sda, sector 275
- [ 215.485394] ata1: EH complete
- [ 283.288227] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 283.289001] ata1.00: BMDMA stat 0x4
- [ 283.289736] ata1.00: failed command: READ DMA
- [ 283.290471] ata1.00: cmd c8/00:08:40:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:08:40:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 283.291912] ata1.00: status: { DRDY ERR }
- [ 283.292660] ata1.00: error: { UNC }
- [ 283.380523] ata1.00: configured for UDMA/100
- [ 283.380559] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 283.380569] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 283.380579] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 283.380589] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 40 00 00 08 00
- [ 283.380595] blk_update_request: I/O error, dev sda, sector 320
- [ 283.381334] Buffer I/O error on dev sda2, logical block 32, async page read
- [ 283.382081] ata1: EH complete
- [ 288.952229] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 288.953003] ata1.00: BMDMA stat 0x4
- [ 288.953725] ata1.00: failed command: READ DMA
- [ 288.954451] ata1.00: cmd c8/00:08:40:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:08:40:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 288.955883] ata1.00: status: { DRDY ERR }
- [ 288.956632] ata1.00: error: { UNC }
- [ 288.980517] ata1.00: configured for UDMA/100
- [ 288.980553] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 288.980564] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 288.980573] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 288.980583] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 40 00 00 08 00
- [ 288.980590] blk_update_request: I/O error, dev sda, sector 320
- [ 288.981325] Buffer I/O error on dev sda2, logical block 32, async page read
- [ 288.982075] ata1: EH complete
- [ 301.760218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 301.760966] ata1.00: BMDMA stat 0x4
- [ 301.761683] ata1.00: failed command: READ DMA
- [ 301.762401] ata1.00: cmd c8/00:08:40:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:43:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 301.763822] ata1.00: status: { DRDY ERR }
- [ 301.764556] ata1.00: error: { UNC }
- [ 301.868542] ata1.00: configured for UDMA/100
- [ 301.868570] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 301.868578] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 301.868589] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 301.868598] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 40 00 00 08 00
- [ 301.868603] blk_update_request: I/O error, dev sda, sector 579
- [ 301.869359] ata1: EH complete
- [ 308.952216] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 308.952946] ata1.00: BMDMA stat 0x4
- [ 308.953665] ata1.00: failed command: READ DMA
- [ 308.954382] ata1.00: cmd c8/00:08:40:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:43:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 308.955803] ata1.00: status: { DRDY ERR }
- [ 308.956529] ata1.00: error: { UNC }
- [ 308.980548] ata1.00: configured for UDMA/100
- [ 308.980570] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 308.980578] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 308.980587] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 308.980595] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 40 00 00 08 00
- [ 308.980600] blk_update_request: I/O error, dev sda, sector 579
- [ 308.981325] Buffer I/O error on dev sda2, logical block 64, async page read
- [ 308.982059] ata1: EH complete
- [ 314.576318] ISO 9660 Extensions: RRIP_1991A
- [ 315.123023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 356.020835] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 356.020855] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 356.529700] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 356.529711] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 356.545366] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 356.545373] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 359.028234] ata1: lost interrupt (Status 0x58)
- [ 359.074060] ata1: drained 65536 bytes to clear DRQ
- [ 359.074104] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 359.074115] ata1.00: failed command: READ DMA
- [ 359.074129] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 40/00:00:43:02:00/00:00:00:00:00/e0 Emask 0x20 (host bus error)
- [ 359.074135] ata1.00: status: { DRDY }
- [ 359.360530] ata1.00: configured for UDMA/100
- [ 359.360562] ata1: EH complete
- [ 367.971491] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 367.971499] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 368.480353] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 368.480358] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 368.496010] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 368.496014] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 370.535335] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 370.535357] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 371.044137] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 371.044147] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 371.059802] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 371.059809] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 371.084845] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 371.084853] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 371.593720] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 371.593725] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 371.609377] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 371.609381] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 372.076093] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 372.076115] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 372.584874] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 372.584886] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 372.600542] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 372.600548] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 372.830122] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 372.830131] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 373.339088] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 373.339093] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 373.354745] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 373.354749] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 375.464745] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 375.464766] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 375.973671] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 375.973682] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 375.989337] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 375.989344] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 376.014020] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 376.014029] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 376.522772] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 376.522776] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 376.538429] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 376.538433] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 377.023732] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 377.023753] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 377.532524] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 377.532535] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 377.548192] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 377.548198] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 378.748173] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 378.748182] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 379.257024] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 379.257029] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 379.272681] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 379.272685] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 380.562274] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 380.562295] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 381.071077] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 381.071088] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 381.086743] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 381.086750] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 382.217145] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 382.217153] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 382.725931] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 382.725936] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 382.741588] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 382.741593] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 385.011399] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 385.011420] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 385.520244] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 385.520255] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 385.535914] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 385.535920] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 385.848260] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 385.848277] ata1.00: BMDMA stat 0x4
- [ 385.848285] ata1.00: failed command: READ DMA
- [ 385.848299] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:5b:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 385.848306] ata1.00: status: { DRDY ERR }
- [ 385.848311] ata1.00: error: { UNC }
- [ 385.936541] ata1.00: configured for UDMA/100
- [ 385.936594] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 385.936605] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 385.936615] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 385.936626] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 385.936633] blk_update_request: I/O error, dev sda, sector 347
- [ 385.936700] ata1: EH complete
- [ 386.966066] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 386.966075] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 387.474846] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 387.474851] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 387.490503] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 387.490507] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 411.600233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 411.600834] ata1.00: BMDMA stat 0x4
- [ 411.601380] ata1.00: failed command: READ DMA
- [ 411.601934] ata1.00: cmd c8/00:08:60:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:63:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 411.603034] ata1.00: status: { DRDY ERR }
- [ 411.603582] ata1.00: error: { UNC }
- [ 411.676522] ata1.00: configured for UDMA/100
- [ 411.676561] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 411.676572] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 411.676582] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 411.676593] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 60 00 00 08 00
- [ 411.676600] blk_update_request: I/O error, dev sda, sector 355
- [ 411.677170] Buffer I/O error on dev sda, logical block 44, async page read
- [ 411.677753] ata1: EH complete
- [ 423.864233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 423.864847] ata1.00: BMDMA stat 0x4
- [ 423.865397] ata1.00: failed command: READ DMA
- [ 423.865955] ata1.00: cmd c8/00:08:60:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:66:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 423.867062] ata1.00: status: { DRDY ERR }
- [ 423.867616] ata1.00: error: { UNC }
- [ 423.972522] ata1.00: configured for UDMA/100
- [ 423.972563] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 423.972573] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 423.972584] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 423.972594] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 60 00 00 08 00
- [ 423.972600] blk_update_request: I/O error, dev sda, sector 358
- [ 423.973173] Buffer I/O error on dev sda, logical block 44, async page read
- [ 423.973767] ata1: EH complete
- [ 429.672219] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 429.672814] ata1.00: BMDMA stat 0x4
- [ 429.673374] ata1.00: failed command: READ DMA
- [ 429.673937] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:02:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 429.675056] ata1.00: status: { DRDY ERR }
- [ 429.675612] ata1.00: error: { UNC }
- [ 429.700521] ata1.00: configured for UDMA/100
- [ 429.700550] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 429.700559] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 429.700569] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 429.700578] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 429.700584] blk_update_request: I/O error, dev sda, sector 4098
- [ 429.701179] ata1: EH complete
- [ 444.088224] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 444.088806] ata1.00: BMDMA stat 0x4
- [ 444.089364] ata1.00: failed command: READ DMA
- [ 444.089924] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 444.091041] ata1.00: status: { DRDY ERR }
- [ 444.091600] ata1.00: error: { UNC }
- [ 444.196541] ata1.00: configured for UDMA/100
- [ 444.196563] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 444.196572] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 444.196580] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 444.196589] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 444.196594] blk_update_request: I/O error, dev sda, sector 4103
- [ 444.197173] Buffer I/O error on dev sda, logical block 512, async page read
- [ 444.197772] ata1: EH complete
- [ 484.084225] ata1: lost interrupt (Status 0x58)
- [ 484.130034] ata1: drained 65536 bytes to clear DRQ
- [ 484.130060] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 484.130710] ata1.00: failed command: READ DMA
- [ 484.131315] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 40/00:00:07:10:00/00:00:00:00:00/e0 Emask 0x20 (host bus error)
- [ 484.132582] ata1.00: status: { DRDY }
- [ 485.316535] ata1.00: configured for UDMA/100
- [ 485.316566] ata1: EH complete
- [ 516.084204] ata1: lost interrupt (Status 0x58)
- [ 516.129991] ata1: drained 65536 bytes to clear DRQ
- [ 516.130011] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 516.130693] ata1.00: failed command: READ DMA
- [ 516.131373] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 40/00:00:07:10:00/00:00:00:00:00/e0 Emask 0x20 (host bus error)
- [ 516.132775] ata1.00: status: { DRDY }
- [ 518.078675] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
- [ 518.078681] ata1.00: revalidation failed (errno=-5)
- [ 523.116196] ata1: link is slow to respond, please be patient (ready=0)
- [ 528.100195] ata1: device not ready (errno=-16), forcing hardreset
- [ 528.100204] ata1: soft resetting link
- [ 528.376521] ata1.00: configured for UDMA/100
- [ 528.376541] ata1: EH complete
- [ 545.628211] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 545.628964] ata1.00: BMDMA stat 0x4
- [ 545.629698] ata1.00: failed command: READ DMA
- [ 545.630429] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:83:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 545.631894] ata1.00: status: { DRDY ERR }
- [ 545.632643] ata1.00: error: { UNC }
- [ 545.720534] ata1.00: configured for UDMA/100
- [ 545.720571] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 545.720582] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 545.720593] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 545.720603] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 545.720609] blk_update_request: I/O error, dev sda, sector 387
- [ 545.721398] ata1: EH complete
- [ 559.908224] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 559.909005] ata1.00: BMDMA stat 0x4
- [ 559.909742] ata1.00: failed command: READ DMA
- [ 559.910477] ata1.00: cmd c8/00:08:80:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:83:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 559.911940] ata1.00: status: { DRDY ERR }
- [ 559.912701] ata1.00: error: { UNC }
- [ 559.936552] ata1.00: configured for UDMA/100
- [ 559.936586] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 559.936596] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 559.936605] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 559.936616] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 80 00 00 08 00
- [ 559.936622] blk_update_request: I/O error, dev sda, sector 387
- [ 559.937367] Buffer I/O error on dev sda, logical block 48, async page read
- [ 559.938135] ata1: EH complete
- [ 582.092243] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 582.093038] ata1.00: BMDMA stat 0x4
- [ 582.093777] ata1.00: failed command: READ DMA
- [ 582.094513] ata1.00: cmd c8/00:08:90:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:92:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 582.095973] ata1.00: status: { DRDY ERR }
- [ 582.096734] ata1.00: error: { UNC }
- [ 582.200526] ata1.00: configured for UDMA/100
- [ 582.200561] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 582.200572] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 582.200582] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 582.200592] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 90 00 00 08 00
- [ 582.200599] blk_update_request: I/O error, dev sda, sector 402
- [ 582.201346] Buffer I/O error on dev sda, logical block 50, async page read
- [ 582.202109] ata1: EH complete
- [ 590.368220] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 590.368981] ata1.00: BMDMA stat 0x4
- [ 590.369713] ata1.00: failed command: READ DMA
- [ 590.370445] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 590.371909] ata1.00: status: { DRDY ERR }
- [ 590.372660] ata1.00: error: { UNC }
- [ 590.412520] ata1.00: configured for UDMA/100
- [ 590.412549] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 590.412558] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 590.412568] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 590.412578] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 590.412584] blk_update_request: I/O error, dev sda, sector 4103
- [ 590.413361] ata1: EH complete
- [ 597.972213] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 597.972968] ata1.00: BMDMA stat 0x4
- [ 597.973704] ata1.00: failed command: READ DMA
- [ 597.974440] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 597.975897] ata1.00: status: { DRDY ERR }
- [ 597.976639] ata1.00: error: { UNC }
- [ 598.000542] ata1.00: configured for UDMA/100
- [ 598.000565] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 598.000573] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 598.000582] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 598.000591] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 598.000596] blk_update_request: I/O error, dev sda, sector 4103
- [ 598.001328] Buffer I/O error on dev sda, logical block 512, async page read
- [ 598.002071] ata1: EH complete
- [ 625.196240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 625.197027] ata1.00: BMDMA stat 0x4
- [ 625.197743] ata1.00: failed command: READ DMA
- [ 625.198461] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:93:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 625.199889] ata1.00: status: { DRDY ERR }
- [ 625.200640] ata1.00: error: { UNC }
- [ 625.288519] ata1.00: configured for UDMA/100
- [ 625.288563] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 625.288574] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 625.288585] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 625.288595] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 625.288602] blk_update_request: I/O error, dev sda, sector 403
- [ 625.289392] ata1: EH complete
- [ 649.528225] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 649.528987] ata1.00: BMDMA stat 0x4
- [ 649.529705] ata1.00: failed command: READ DMA
- [ 649.530426] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 649.531854] ata1.00: status: { DRDY ERR }
- [ 649.532591] ata1.00: error: { UNC }
- [ 649.612517] ata1.00: configured for UDMA/100
- [ 649.612552] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 649.612561] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 649.612572] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 649.612581] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 649.612587] blk_update_request: I/O error, dev sda, sector 410
- [ 649.613324] Buffer I/O error on dev sda, logical block 51, async page read
- [ 649.614074] ata1: EH complete
- [ 656.440235] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 656.441012] ata1.00: BMDMA stat 0x4
- [ 656.441736] ata1.00: failed command: READ DMA
- [ 656.442462] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 656.443891] ata1.00: status: { DRDY ERR }
- [ 656.444634] ata1.00: error: { UNC }
- [ 656.484517] ata1.00: configured for UDMA/100
- [ 656.484556] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 656.484566] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 656.484577] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 656.484587] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 656.484593] blk_update_request: I/O error, dev sda, sector 410
- [ 656.485331] Buffer I/O error on dev sda, logical block 51, async page read
- [ 656.486091] ata1: EH complete
- [ 663.400222] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 663.400968] ata1.00: BMDMA stat 0x4
- [ 663.401694] ata1.00: failed command: READ DMA
- [ 663.402417] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 663.403846] ata1.00: status: { DRDY ERR }
- [ 663.404581] ata1.00: error: { UNC }
- [ 663.444522] ata1.00: configured for UDMA/100
- [ 663.444551] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 663.444561] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 663.444571] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 663.444580] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 663.444586] blk_update_request: I/O error, dev sda, sector 4103
- [ 663.445345] ata1: EH complete
- [ 669.084213] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 669.084949] ata1.00: BMDMA stat 0x4
- [ 669.085670] ata1.00: failed command: READ DMA
- [ 669.086395] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 669.087827] ata1.00: status: { DRDY ERR }
- [ 669.088557] ata1.00: error: { UNC }
- [ 669.128531] ata1.00: configured for UDMA/100
- [ 669.128555] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 669.128563] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 669.128572] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 669.128580] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 669.128585] blk_update_request: I/O error, dev sda, sector 4103
- [ 669.129316] Buffer I/O error on dev sda, logical block 512, async page read
- [ 669.130054] ata1: EH complete
- [ 691.100239] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 691.101026] ata1.00: BMDMA stat 0x4
- [ 691.101751] ata1.00: failed command: READ DMA
- [ 691.102472] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 691.103904] ata1.00: status: { DRDY ERR }
- [ 691.104651] ata1.00: error: { UNC }
- [ 691.144524] ata1.00: configured for UDMA/100
- [ 691.144569] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 691.144580] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 691.144591] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 691.144601] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 691.144608] blk_update_request: I/O error, dev sda, sector 410
- [ 691.145394] ata1: EH complete
- [ 702.292239] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 702.293004] ata1.00: BMDMA stat 0x4
- [ 702.293722] ata1.00: failed command: READ DMA
- [ 702.294447] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 702.295875] ata1.00: status: { DRDY ERR }
- [ 702.296615] ata1.00: error: { UNC }
- [ 702.320523] ata1.00: configured for UDMA/100
- [ 702.320557] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 702.320567] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 702.320578] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 702.320587] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 702.320593] blk_update_request: I/O error, dev sda, sector 410
- [ 702.321326] Buffer I/O error on dev sda, logical block 51, async page read
- [ 702.322073] ata1: EH complete
- [ 707.888232] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 707.889013] ata1.00: BMDMA stat 0x4
- [ 707.889734] ata1.00: failed command: READ DMA
- [ 707.890454] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 707.891880] ata1.00: status: { DRDY ERR }
- [ 707.892631] ata1.00: error: { UNC }
- [ 707.932520] ata1.00: configured for UDMA/100
- [ 707.932560] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 707.932571] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 707.932581] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 707.932590] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 707.932597] blk_update_request: I/O error, dev sda, sector 410
- [ 707.933334] Buffer I/O error on dev sda, logical block 51, async page read
- [ 707.934088] ata1: EH complete
- [ 713.584221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 713.584971] ata1.00: BMDMA stat 0x4
- [ 713.585693] ata1.00: failed command: READ DMA
- [ 713.586411] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 713.587837] ata1.00: status: { DRDY ERR }
- [ 713.588568] ata1.00: error: { UNC }
- [ 713.612532] ata1.00: configured for UDMA/100
- [ 713.612561] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 713.612571] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 713.612581] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 713.612590] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 713.612596] blk_update_request: I/O error, dev sda, sector 4103
- [ 713.613351] ata1: EH complete
- [ 719.532213] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 719.532948] ata1.00: BMDMA stat 0x4
- [ 719.533661] ata1.00: failed command: READ DMA
- [ 719.534385] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 719.535813] ata1.00: status: { DRDY ERR }
- [ 719.536537] ata1.00: error: { UNC }
- [ 719.560532] ata1.00: configured for UDMA/100
- [ 719.560557] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 719.560566] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 719.560574] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 719.560582] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 719.560588] blk_update_request: I/O error, dev sda, sector 4103
- [ 719.561312] Buffer I/O error on dev sda, logical block 512, async page read
- [ 719.562054] ata1: EH complete
- [ 746.944240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 746.945030] ata1.00: BMDMA stat 0x4
- [ 746.945755] ata1.00: failed command: READ DMA
- [ 746.946481] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 746.947917] ata1.00: status: { DRDY ERR }
- [ 746.948669] ata1.00: error: { UNC }
- [ 746.972525] ata1.00: configured for UDMA/100
- [ 746.972569] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 746.972579] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 746.972590] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 746.972600] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 746.972607] blk_update_request: I/O error, dev sda, sector 410
- [ 746.973396] ata1: EH complete
- [ 757.140228] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 757.141003] ata1.00: BMDMA stat 0x4
- [ 757.141726] ata1.00: failed command: READ DMA
- [ 757.142450] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 757.143890] ata1.00: status: { DRDY ERR }
- [ 757.144638] ata1.00: error: { UNC }
- [ 757.168526] ata1.00: configured for UDMA/100
- [ 757.168562] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 757.168572] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 757.168583] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 757.168593] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 757.168599] blk_update_request: I/O error, dev sda, sector 410
- [ 757.169338] Buffer I/O error on dev sda, logical block 51, async page read
- [ 757.170094] ata1: EH complete
- [ 762.736234] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 762.737025] ata1.00: BMDMA stat 0x4
- [ 762.737748] ata1.00: failed command: READ DMA
- [ 762.738477] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 762.739914] ata1.00: status: { DRDY ERR }
- [ 762.740664] ata1.00: error: { UNC }
- [ 762.764525] ata1.00: configured for UDMA/100
- [ 762.764568] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 762.764579] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 762.764589] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 762.764599] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 762.764605] blk_update_request: I/O error, dev sda, sector 410
- [ 762.765353] Buffer I/O error on dev sda, logical block 51, async page read
- [ 762.766121] ata1: EH complete
- [ 768.696220] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 768.696980] ata1.00: BMDMA stat 0x4
- [ 768.697704] ata1.00: failed command: READ DMA
- [ 768.698431] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 768.699869] ata1.00: status: { DRDY ERR }
- [ 768.700613] ata1.00: error: { UNC }
- [ 768.740540] ata1.00: configured for UDMA/100
- [ 768.740573] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 768.740584] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 768.740593] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 768.740603] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 768.740609] blk_update_request: I/O error, dev sda, sector 4103
- [ 768.741374] ata1: EH complete
- [ 774.368217] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 774.368965] ata1.00: BMDMA stat 0x4
- [ 774.369692] ata1.00: failed command: READ DMA
- [ 774.370416] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 774.371855] ata1.00: status: { DRDY ERR }
- [ 774.372595] ata1.00: error: { UNC }
- [ 774.396551] ata1.00: configured for UDMA/100
- [ 774.396577] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 774.396586] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 774.396595] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 774.396604] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 774.396610] blk_update_request: I/O error, dev sda, sector 4103
- [ 774.397338] Buffer I/O error on dev sda, logical block 512, async page read
- [ 774.398088] ata1: EH complete
- [ 790.504242] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 790.505035] ata1.00: BMDMA stat 0x4
- [ 790.505764] ata1.00: failed command: READ DMA
- [ 790.506489] ata1.00: cmd c8/00:f0:50:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 790.507918] ata1.00: status: { DRDY ERR }
- [ 790.508690] ata1.00: error: { UNC }
- [ 790.532523] ata1.00: configured for UDMA/100
- [ 790.532569] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 790.532579] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 790.532590] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 790.532601] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 50 00 00 f0 00
- [ 790.532607] blk_update_request: I/O error, dev sda, sector 410
- [ 790.533397] ata1: EH complete
- [ 802.236240] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 802.237028] ata1.00: BMDMA stat 0x4
- [ 802.237749] ata1.00: failed command: READ DMA
- [ 802.238472] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 802.239897] ata1.00: status: { DRDY ERR }
- [ 802.240641] ata1.00: error: { UNC }
- [ 802.264529] ata1.00: configured for UDMA/100
- [ 802.264574] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 802.264585] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 802.264596] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 802.264606] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 802.264613] blk_update_request: I/O error, dev sda, sector 410
- [ 802.265353] Buffer I/O error on dev sda2, logical block 43, async page read
- [ 802.266113] ata1: EH complete
- [ 808.076235] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 808.077013] ata1.00: BMDMA stat 0x4
- [ 808.077734] ata1.00: failed command: READ DMA
- [ 808.078455] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 808.079879] ata1.00: status: { DRDY ERR }
- [ 808.080615] ata1.00: error: { UNC }
- [ 808.120544] ata1.00: configured for UDMA/100
- [ 808.120587] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 808.120597] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 808.120607] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 808.120618] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 808.120624] blk_update_request: I/O error, dev sda, sector 410
- [ 808.121363] Buffer I/O error on dev sda2, logical block 43, async page read
- [ 808.122118] ata1: EH complete
- [ 818.224225] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 818.224971] ata1.00: BMDMA stat 0x4
- [ 818.225689] ata1.00: failed command: READ DMA
- [ 818.226406] ata1.00: cmd c8/00:08:40:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:45:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 818.227830] ata1.00: status: { DRDY ERR }
- [ 818.228561] ata1.00: error: { UNC }
- [ 818.316540] ata1.00: configured for UDMA/100
- [ 818.316574] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 818.316583] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 818.316592] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 818.316602] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 40 00 00 08 00
- [ 818.316608] blk_update_request: I/O error, dev sda, sector 581
- [ 818.317367] ata1: EH complete
- [ 823.900237] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 823.901009] ata1.00: BMDMA stat 0x4
- [ 823.901720] ata1.00: failed command: READ DMA
- [ 823.902442] ata1.00: cmd c8/00:08:40:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:45:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 823.903864] ata1.00: status: { DRDY ERR }
- [ 823.904599] ata1.00: error: { UNC }
- [ 823.928518] ata1.00: configured for UDMA/100
- [ 823.928560] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 823.928570] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 823.928580] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 823.928591] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 40 00 00 08 00
- [ 823.928597] blk_update_request: I/O error, dev sda, sector 581
- [ 823.929329] Buffer I/O error on dev sda2, logical block 64, async page read
- [ 823.930085] ata1: EH complete
- [ 854.141001] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 854.141419] systemd[1]: Detected architecture ppc.
- [ 854.141988] systemd[1]: Set hostname to <lubuntu>.
- [ 854.142533] systemd[1]: Initializing machine ID from random generator.
- [ 855.038122] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 855.038982] systemd[1]: Created slice System Slice.
- [ 855.039199] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 855.039440] systemd[1]: Listening on Journal Socket.
- [ 855.043113] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 855.046350] systemd[1]: Starting Uncomplicated firewall...
- [ 855.057431] systemd[1]: Started Read required files in advance.
- [ 855.067620] systemd[1]: Starting LSB: controls configuration of serial ports...
- [ 855.079113] systemd[1]: Starting Nameserver information manager...
- [ 855.079265] systemd[1]: Reached target User and Group Name Lookups.
- [ 855.092768] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 855.093234] systemd[1]: Listening on LVM2 metadata daemon socket.
- [ 855.093420] systemd[1]: Reached target Remote File Systems (Pre).
- [ 855.093636] systemd[1]: Listening on Syslog Socket.
- [ 855.093835] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 855.101297] systemd[1]: Starting Load Kernel Modules...
- [ 855.105081] systemd[1]: Listening on udev Kernel Socket.
- [ 855.105329] systemd[1]: Reached target Encrypted Volumes.
- [ 855.105658] systemd[1]: Listening on udev Control Socket.
- [ 855.108984] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- [ 855.109450] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 855.110347] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 855.621441] systemd[1]: Listening on Journal Audit Socket.
- [ 855.621530] systemd[1]: Reached target Swap.
- [ 855.621731] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 855.621811] systemd[1]: Reached target Remote File Systems.
- [ 855.632892] systemd[1]: Starting Journal Service...
- [ 855.636003] systemd[1]: Mounting POSIX Message Queue File System...
- [ 855.640094] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 855.640827] systemd[1]: Created slice User and Session Slice.
- [ 855.640892] systemd[1]: Reached target Slices.
- [ 855.643653] systemd[1]: Mounting Debug File System...
- [ 855.765941] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 855.797712] systemd[1]: Started Uncomplicated firewall.
- [ 855.838803] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 855.840128] systemd[1]: Started Load Kernel Modules.
- [ 855.854309] systemd[1]: Starting Apply Kernel Variables...
- [ 855.861384] systemd[1]: Mounting FUSE Control File System...
- [ 856.294605] systemd[1]: Mounted Debug File System.
- [ 856.330910] systemd[1]: Mounted FUSE Control File System.
- [ 856.333429] systemd[1]: Mounted POSIX Message Queue File System.
- [ 856.339745] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 856.354438] systemd[1]: Started Nameserver information manager.
- [ 856.391521] systemd[1]: Starting udev Coldplug all Devices...
- [ 856.401907] systemd[1]: Starting Load/Save Random Seed...
- [ 856.403256] systemd[1]: Started Apply Kernel Variables.
- [ 857.010473] systemd[1]: Started Load/Save Random Seed.
- [ 857.519100] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 857.536518] systemd[1]: Starting udev Kernel Device Manager...
- [ 857.817917] systemd[1]: Started Journal Service.
- [ 859.218861] systemd-journald[931]: Received request to flush runtime journal from PID 1
- [ 865.880279] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
- [ 870.298219] zram: Added device: zram0
- [ 872.977268] zram0: detected capacity change from 0 to 390709248
- [ 875.388369] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 875.388878] ata1.00: BMDMA stat 0x4
- [ 875.389287] ata1.00: failed command: READ DMA
- [ 875.389700] ata1.00: cmd c8/00:f0:10:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 875.390518] ata1.00: status: { DRDY ERR }
- [ 875.390917] ata1.00: error: { UNC }
- [ 875.428684] ata1.00: configured for UDMA/100
- [ 875.428746] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 875.428758] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 875.428768] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 875.428779] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 10 00 00 f0 00
- [ 875.428785] blk_update_request: I/O error, dev sda, sector 410
- [ 875.429370] ata1: EH complete
- [ 876.989498] Bluetooth: Core ver 2.21
- [ 876.989610] NET: Registered protocol family 31
- [ 876.989617] Bluetooth: HCI device and connection manager initialized
- [ 876.991125] Bluetooth: HCI socket layer initialized
- [ 876.991144] Bluetooth: L2CAP socket layer initialized
- [ 876.991181] Bluetooth: SCO socket layer initialized
- [ 877.303455] Adding 381548k swap on /dev/zram0. Priority:5 extents:1 across:381548k SSFS
- [ 880.770502] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6
- [ 880.817811] usbcore: registered new interface driver btusb
- [ 883.364040] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 883.364612] ata1.00: BMDMA stat 0x4
- [ 883.365052] ata1.00: failed command: READ DMA
- [ 883.365484] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 883.366355] ata1.00: status: { DRDY ERR }
- [ 883.366804] ata1.00: error: { UNC }
- [ 883.388587] ata1.00: configured for UDMA/100
- [ 883.388645] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 883.388656] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 883.388666] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 883.388677] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 883.388684] blk_update_request: I/O error, dev sda, sector 410
- [ 883.389226] Buffer I/O error on dev sda, logical block 51, async page read
- [ 883.389749] ata1: EH complete
- [ 884.451889] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
- [ 884.460311] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
- [ 884.460347] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
- [ 884.472412] Broadcom 43xx driver loaded [ Features: PNL ]
- [ 884.475005] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
- [ 884.475076] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
- [ 884.475170] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
- [ 884.475206] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
- [ 884.475214] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
- [ 884.475766] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
- [ 884.476346] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
- [ 888.308267] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 888.308284] Bluetooth: BNEP filters: protocol multicast
- [ 888.308323] Bluetooth: BNEP socket layer initialized
- [ 888.972251] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 888.972871] ata1.00: BMDMA stat 0x4
- [ 888.973413] ata1.00: failed command: READ DMA
- [ 888.973964] ata1.00: cmd c8/00:08:98:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 888.975070] ata1.00: status: { DRDY ERR }
- [ 888.975633] ata1.00: error: { UNC }
- [ 889.000526] ata1.00: configured for UDMA/100
- [ 889.000575] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 889.000585] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 889.000596] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 889.000607] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 98 00 00 08 00
- [ 889.000614] blk_update_request: I/O error, dev sda, sector 410
- [ 889.001255] Buffer I/O error on dev sda, logical block 51, async page read
- [ 889.001889] ata1: EH complete
- [ 892.712401] IPv6: ADDRCONF(NETDEV_UP): enP2p32s15f0: link is not ready
- [ 892.780555] sungem_phy: PHY ID: 4061e4, addr: 0
- [ 892.780913] gem 0002:20:0f.0 enP2p32s15f0: Found BCM5221 PHY
- [ 892.781175] IPv6: ADDRCONF(NETDEV_UP): enP2p32s15f0: link is not ready
- [ 894.004520] nouveau 0000:00:10.0: DRM: Calling LVDS script 6:
- [ 894.004541] nouveau 0000:00:10.0: DRM: 0x0A6B: Parsing digital output script table
- [ 894.516144] nouveau 0000:00:10.0: DRM: Calling LVDS script 2:
- [ 894.516162] nouveau 0000:00:10.0: DRM: 0x09F3: Parsing digital output script table
- [ 894.531847] nouveau 0000:00:10.0: DRM: Calling LVDS script 5:
- [ 894.531855] nouveau 0000:00:10.0: DRM: 0x0A54: Parsing digital output script table
- [ 894.736261] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 894.736280] ata1.00: BMDMA stat 0x4
- [ 894.736288] ata1.00: failed command: READ DMA
- [ 894.736302] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 894.736309] ata1.00: status: { DRDY ERR }
- [ 894.736314] ata1.00: error: { UNC }
- [ 894.776528] ata1.00: configured for UDMA/100
- [ 894.776579] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 894.776590] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 894.776601] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 894.776612] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 894.776619] blk_update_request: I/O error, dev sda, sector 4103
- [ 894.776660] ata1: EH complete
- [ 895.188346] gem 0002:20:0f.0 enP2p32s15f0: Link is up at 100 Mbps, full-duplex
- [ 895.188484] gem 0002:20:0f.0 enP2p32s15f0: Pause is disabled
- [ 895.190376] IPv6: ADDRCONF(NETDEV_CHANGE): enP2p32s15f0: link becomes ready
- [ 900.420284] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 900.420303] ata1.00: BMDMA stat 0x4
- [ 900.420312] ata1.00: failed command: READ DMA
- [ 900.420326] ata1.00: cmd c8/00:08:00:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:07:10:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 900.420333] ata1.00: status: { DRDY ERR }
- [ 900.420338] ata1.00: error: { UNC }
- [ 900.444562] ata1.00: configured for UDMA/100
- [ 900.444613] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 900.444624] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 900.444635] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 900.444646] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
- [ 900.444652] blk_update_request: I/O error, dev sda, sector 4103
- [ 900.444661] Buffer I/O error on dev sda, logical block 512, async page read
- [ 900.444697] ata1: EH complete
- [ 914.268379] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 914.268398] ata1.00: BMDMA stat 0x4
- [ 914.268406] ata1.00: failed command: READ DMA
- [ 914.268421] ata1.00: cmd c8/00:f0:50:01:00/00:00:00:00:00/e0 tag 0 dma 122880 in
- res 51/40:00:9a:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 914.268428] ata1.00: status: { DRDY ERR }
- [ 914.268433] ata1.00: error: { UNC }
- [ 914.308722] ata1.00: configured for UDMA/100
- [ 914.308785] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 914.308796] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 914.308807] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 914.308817] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 50 00 00 f0 00
- [ 914.308824] blk_update_request: I/O error, dev sda, sector 410
- [ 914.308903] ata1: EH complete
- [ 967.050903] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 981.804360] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 981.804383] ata1.00: BMDMA stat 0x4
- [ 981.804396] ata1.00: failed command: READ DMA
- [ 981.804422] ata1.00: cmd c8/00:08:c0:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:c1:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 981.804435] ata1.00: status: { DRDY ERR }
- [ 981.804444] ata1.00: error: { UNC }
- [ 981.892614] ata1.00: configured for UDMA/100
- [ 981.892685] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 981.892702] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 981.892719] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 981.892737] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 c0 00 00 08 00
- [ 981.892747] blk_update_request: I/O error, dev sda, sector 449
- [ 981.892763] Buffer I/O error on dev sda2, logical block 48, async page read
- [ 981.892830] ata1: EH complete
- [ 1015.620271] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 1015.620294] ata1.00: BMDMA stat 0x4
- [ 1015.620307] ata1.00: failed command: READ DMA
- [ 1015.620332] ata1.00: cmd c8/00:08:d0:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:d2:01:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 1015.620345] ata1.00: status: { DRDY ERR }
- [ 1015.620355] ata1.00: error: { UNC }
- [ 1015.716610] ata1.00: configured for UDMA/100
- [ 1015.716675] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 1015.716692] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 1015.716710] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 1015.716727] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 01 d0 00 00 08 00
- [ 1015.716737] blk_update_request: I/O error, dev sda, sector 466
- [ 1015.716752] Buffer I/O error on dev sda2, logical block 50, async page read
- [ 1015.716818] ata1: EH complete
- [ 1021.340268] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 1021.340291] ata1.00: BMDMA stat 0x4
- [ 1021.340304] ata1.00: failed command: READ DMA
- [ 1021.340330] ata1.00: cmd c8/00:08:40:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:45:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 1021.340343] ata1.00: status: { DRDY ERR }
- [ 1021.340353] ata1.00: error: { UNC }
- [ 1021.380578] ata1.00: configured for UDMA/100
- [ 1021.380642] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 1021.380659] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 1021.380677] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 1021.380694] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 40 00 00 08 00
- [ 1021.380705] blk_update_request: I/O error, dev sda, sector 581
- [ 1021.380778] ata1: EH complete
- [ 1027.000297] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
- [ 1027.000318] ata1.00: BMDMA stat 0x4
- [ 1027.000331] ata1.00: failed command: READ DMA
- [ 1027.000356] ata1.00: cmd c8/00:08:40:02:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- res 51/40:00:45:02:00/00:00:00:00:00/e0 Emask 0x9 (media error)
- [ 1027.000369] ata1.00: status: { DRDY ERR }
- [ 1027.000379] ata1.00: error: { UNC }
- [ 1027.040698] ata1.00: configured for UDMA/100
- [ 1027.040769] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 1027.040786] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor]
- [ 1027.040803] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
- [ 1027.040820] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 02 40 00 00 08 00
- [ 1027.040831] blk_update_request: I/O error, dev sda, sector 581
- [ 1027.040847] Buffer I/O error on dev sda2, logical block 64, async page read
- [ 1027.040923] ata1: EH complete
- [/code]
- [/SPOILER]
- [SPOILER="Smart"]
- [CODE]smartctl 6.5 2016-01-24 r4214 [ppc-linux-4.4.0-21-powerpc-smp] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Momentus 5400.2
- Device Model: ST9100823A
- Serial Number: 3LG0FHKF
- Firmware Version: 3.02
- User Capacity: 100,030,242,816 bytes [100 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
- Local Time is: Fri Feb 28 05:19:46 2020 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 426) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 111) minutes.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 049 049 034 Pre-fail Always - 11639919
- 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 881
- 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 78
- 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 33558285
- 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1252
- 10 Spin_Retry_Count 0x0013 098 098 034 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 942
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1089
- 193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 44061
- 194 Temperature_Celsius 0x0022 047 062 000 Old_age Always - 47 (0 11 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 049 048 000 Old_age Always - 11639919
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 5
- 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 3
- 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
- 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 268 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 268 occurred at disk power-on lifetime: 1251 hours (52 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 02 00 e0 Error: UNC at LBA = 0x00000245 = 581
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 02 00 e0 00 01:28:22.236 READ DMA
- b0 d0 01 00 4f c2 00 00 01:28:22.217 SMART READ DATA
- e5 00 00 00 00 00 00 00 01:28:22.217 CHECK POWER MODE
- 27 00 00 00 00 00 e0 00 01:28:22.212 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 02 01:28:22.201 IDENTIFY DEVICE
- Error 267 occurred at disk power-on lifetime: 1251 hours (52 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 45 02 00 e0 Error: UNC at LBA = 0x00000245 = 581
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 40 02 00 e0 00 01:28:22.236 READ DMA
- b0 d1 01 00 4f c2 00 00 01:28:22.217 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
- 27 00 00 00 00 00 e0 00 01:28:22.217 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 02 01:28:22.212 IDENTIFY DEVICE
- ef 03 45 00 00 00 a0 02 01:28:22.201 SET FEATURES [Set transfer mode]
- Error 266 occurred at disk power-on lifetime: 1251 hours (52 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 d2 01 00 e0 Error: UNC at LBA = 0x000001d2 = 466
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 d0 01 00 e0 00 01:27:48.305 READ DMA
- e5 00 00 00 00 00 00 00 01:27:48.294 CHECK POWER MODE
- ec 00 01 00 00 00 00 00 01:27:48.293 IDENTIFY DEVICE
- c8 00 08 c8 01 00 e0 00 01:27:48.279 READ DMA
- c8 00 08 c0 01 00 e0 00 01:27:40.210 READ DMA
- Error 265 occurred at disk power-on lifetime: 1251 hours (52 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 c1 01 00 e0 Error: UNC at LBA = 0x000001c1 = 449
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 c0 01 00 e0 00 01:26:41.205 READ DMA
- c8 00 08 b8 01 00 e0 00 01:26:41.205 READ DMA
- ec 00 01 00 00 00 00 00 01:26:41.171 IDENTIFY DEVICE
- c8 00 08 b0 01 00 e0 00 01:26:40.777 READ DMA
- c8 00 08 a8 01 00 e0 00 01:27:40.210 READ DMA
- Error 264 occurred at disk power-on lifetime: 1251 hours (52 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 9a 01 00 e0 Error: UNC at LBA = 0x0000019a = 410
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 f0 50 01 00 e0 00 01:26:28.677 READ DMA
- c8 00 00 40 02 04 e0 00 01:26:28.655 READ DMA
- c8 00 90 c0 00 00 e0 00 01:26:28.566 READ DMA
- c8 00 38 80 00 00 e0 00 01:26:31.940 READ DMA
- c8 00 18 60 00 00 e0 00 01:26:31.929 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 1248 4294901871
- # 2 Short offline Completed: read failure 90% 1248 4294901871
- # 3 Extended offline Completed: read failure 90% 1248 4294901762
- # 4 Short offline Aborted by host 90% 1248 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- [/CODE]
- [/SPOILER]
- [SPOILER="gsmartcontrol I"]
- [CODE]Last login: Sun Mar 1 20:13:48 on console
- floogyss-Computer:~ floogy$ port version
- Version: 2.6.2
- floogyss-Computer:~ floogy$ port selfupdate --no-sync
- Error: Insufficient privileges to write to MacPorts install prefix.
- floogyss-Computer:~ floogy$ sudo port selfupdate --no-sync
- WARNING: Improper use of the sudo command could lead to data loss
- or the deletion of important system files. Please double-check your
- typing when using sudo. Type "man sudo" for more information.
- To proceed, enter your password, or type Ctrl-C to abort.
- Password:
- ---> Updating MacPorts base sources using rsync
- MacPorts base version 2.6.2 installed,
- MacPorts base version 2.6.2 downloaded.
- ---> MacPorts base is already the latest version
- floogyss-Computer:~ floogy$ sudo port install gsmartcontrol
- ---> Computing dependencies for gsmartcontrol
- The following dependencies will be installed:
- Xft2
- at-spi2-atk
- at-spi2-core
- atk
- atkmm
- autoconf
- autoconf-archive
- automake
- bison
- bison-runtime
- bzip2
- cairo
- cairomm
- cctools
- cmake
- coreutils
- curl
- curl-ca-bundle
- db48
- dbus
- docbook-xml
- docbook-xml-4.1.2
- docbook-xml-4.2
- docbook-xml-4.3
- docbook-xml-4.4
- docbook-xml-4.5
- docbook-xml-5.0
- docbook-xsl-nons
- doxygen
- expat
- flex
- fontconfig
- freetype
- fribidi
- gawk
- gcc6
- gcc7
- gcc_select
- gd2
- gdbm
- gdk-pixbuf2
- gettext
- giflib
- git
- glib2
- glibmm
- gmp
- gnome-common
- gnutls
- gobject-introspection
- gperf
- graphite2
- graphviz
- gsed
- gtk-doc
- gtk3
- gtkmm3
- gts
- harfbuzz
- hicolor-icon-theme
- icu
- intltool
- isl
- itstool
- jasper
- jpeg
- kerberos5
- ld64
- ld64-127
- legacy-support
- libLASi
- libarchive
- libcomerr
- libedit
- libepoxy
- libffi
- libgcc
- libgcc6
- libgcc7
- libiconv
- libidn
- libidn2
- libmpc
- libnetpbm
- libpixman
- libpng
- libpsl
- libsigcxx2
- libtasn1
- libtool
- libunistring
- libunwind-headers
- libuv
- libxml2
- libxslt
- llvm-3.3
- llvm_select
- lz4
- lzip
- lzo2
- m4
- mesa
- meson
- mm-common
- mpfr
- ncurses
- nettle
- ninja
- openssl
- ossp-uuid
- p11-kit
- p5.28-authen-sasl
- p5.28-cgi
- p5.28-cpan-meta
- p5.28-cpan-meta-requirements
- p5.28-cpan-meta-yaml
- p5.28-data-dump
- p5.28-devel-checkbin
- p5.28-digest-hmac
- p5.28-digest-sha1
- p5.28-encode
- p5.28-encode-locale
- p5.28-error
- p5.28-extutils-config
- p5.28-extutils-helpers
- p5.28-extutils-install
- p5.28-extutils-installpaths
- p5.28-extutils-makemaker
- p5.28-extutils-manifest
- p5.28-file-listing
- p5.28-getopt-long
- p5.28-gssapi
- p5.28-html-form
- p5.28-html-parser
- p5.28-html-tagset
- p5.28-http-cookies
- p5.28-http-daemon
- p5.28-http-date
- p5.28-http-message
- p5.28-http-negotiate
- p5.28-inc-latest
- p5.28-io
- p5.28-io-html
- p5.28-io-socket-inet6
- p5.28-io-socket-ip
- p5.28-io-socket-ssl
- p5.28-libwww-perl
- p5.28-lwp-mediatypes
- p5.28-lwp-protocol-https
- p5.28-module-build
- p5.28-module-build-tiny
- p5.28-module-metadata
- p5.28-mozilla-ca
- p5.28-net-http
- p5.28-net-libidn
- p5.28-net-smtp-ssl
- p5.28-net-ssleay
- p5.28-pathtools
- p5.28-perl-ostype
- p5.28-pod-escapes
- p5.28-pod-simple
- p5.28-podlators
- p5.28-scalar-list-utils
- p5.28-socket
- p5.28-socket6
- p5.28-sub-name
- p5.28-sub-uplevel
- p5.28-term-readkey
- p5.28-test-deep
- p5.28-test-exception
- p5.28-test-fatal
- p5.28-test-harness
- p5.28-test-leaktrace
- p5.28-test-needs
- p5.28-test-nowarnings
- p5.28-test-requiresinternet
- p5.28-test-warn
- p5.28-time-local
- p5.28-timedate
- p5.28-try-tiny
- p5.28-uri
- p5.28-version
- p5.28-www-robotrules
- p5.28-xml-parser
- pango
- pangomm
- pcre
- pcre2
- perl5
- perl5.28
- pkgconfig
- popt
- py27-libxml2
- py38-anytree
- py38-beaker
- py38-lxml
- py38-mako
- py38-markdown
- py38-markupsafe
- py38-pygments
- py38-setuptools
- py38-six
- pygments_select
- python27
- python2_select
- python37
- python38
- python3_select
- python_select
- re2c
- readline
- rsync
- shared-mime-info
- smartmontools
- sqlite3
- tiff
- urw-fonts
- webp
- wget
- xmlcatmgr
- xorg-libX11
- xorg-libXau
- xorg-libXaw
- xorg-libXcomposite
- xorg-libXcursor
- xorg-libXdamage
- xorg-libXdmcp
- xorg-libXext
- xorg-libXfixes
- xorg-libXi
- xorg-libXinerama
- xorg-libXmu
- xorg-libXrandr
- xorg-libXt
- xorg-libXtst
- xorg-libXxf86vm
- xorg-libice
- xorg-libpthread-stubs
- xorg-libsm
- xorg-libxcb
- xorg-util-macros
- xorg-xcb-proto
- xorg-xcb-util
- xorg-xorgproto
- xorg-xtrans
- xpm
- xrender
- xz
- zlib
- zstd
- Continue? [Y/n]:
- ---> Fetching archive for libunwind-headers
- ---> Attempting to fetch libunwind-headers-5.0.1_0.darwin_9.noarch.tbz2 from http://packages.macports.org/libunwind-headers
- ---> Attempting to fetch libunwind-headers-5.0.1_0.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/libunwind-headers
- ---> Installing libunwind-headers @5.0.1_0
- ---> Activating libunwind-headers @5.0.1_0
- ---> Cleaning libunwind-headers
- ---> Fetching archive for cctools
- ---> Attempting to fetch cctools-927.0.2_1.darwin_9.ppc.tbz2 from http://packages.macports.org/cctools
- ---> Attempting to fetch cctools-927.0.2_1.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/cctools
- ---> Attempting to fetch cctools-927.0.2_1.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/cctools
- ---> Fetching distfiles for cctools
- ---> Attempting to fetch ld64-450.3.tar.gz from http://distfiles.macports.org/cctools
- ---> Attempting to fetch cctools-927.0.2.tar.gz from http://distfiles.macports.org/cctools
- ---> Verifying checksums for cctools
- ---> Extracting cctools
- ---> Applying patches to cctools
- Warning: reinplace /^COMMON_SUBDIRS/s/ ld / / didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_cctools/cctools/work/cctools-927.0.2/Makefile
- ---> Configuring cctools
- ---> Building cctools
- ---> Staging cctools into destroot
- ---> Installing cctools @927.0.2_1
- ---> Activating cctools @927.0.2_1
- ---> Cleaning cctools
- ---> Fetching archive for gcc_select
- ---> Attempting to fetch gcc_select-0.1_8.darwin_9.noarch.tbz2 from http://packages.macports.org/gcc_select
- ---> Attempting to fetch gcc_select-0.1_8.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/gcc_select
- ---> Installing gcc_select @0.1_8
- ---> Activating gcc_select @0.1_8
- ---> Cleaning gcc_select
- ---> Fetching archive for gmp
- ---> Attempting to fetch gmp-6.2.0_1.darwin_9.ppc.tbz2 from http://packages.macports.org/gmp
- ---> Attempting to fetch gmp-6.2.0_1.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/gmp
- ---> Attempting to fetch gmp-6.2.0_1.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/gmp
- ---> Fetching distfiles for gmp
- ---> Attempting to fetch gmp-6.2.0.tar.bz2 from http://distfiles.macports.org/gmp
- ---> Verifying checksums for gmp
- ---> Extracting gmp
- ---> Applying patches to gmp
- ---> Configuring gmp
- ---> Building gmp
- ---> Staging gmp into destroot
- ---> Installing gmp @6.2.0_1
- ---> Activating gmp @6.2.0_1
- ---> Cleaning gmp
- ---> Fetching archive for isl
- ---> Attempting to fetch isl-0.22.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/isl
- ---> Attempting to fetch isl-0.22.1_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/isl
- ---> Attempting to fetch isl-0.22.1_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/isl
- ---> Fetching distfiles for isl
- ---> Attempting to fetch isl-0.22.1.tar.bz2 from http://distfiles.macports.org/isl
- ---> Verifying checksums for isl
- ---> Extracting isl
- ---> Applying patches to isl
- ---> Configuring isl
- ---> Building isl
- ---> Staging isl into destroot
- ---> Installing isl @0.22.1_0
- ---> Activating isl @0.22.1_0
- ---> Cleaning isl
- ---> Fetching archive for libffi
- ---> Attempting to fetch libffi-3.2.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libffi
- ---> Attempting to fetch libffi-3.2.1_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/libffi
- ---> Installing libffi @3.2.1_0
- ---> Activating libffi @3.2.1_0
- ---> Cleaning libffi
- ---> Fetching archive for llvm_select
- ---> Attempting to fetch llvm_select-2_0.darwin_9.noarch.tbz2 from http://packages.macports.org/llvm_select
- ---> Attempting to fetch llvm_select-2_0.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/llvm_select
- ---> Installing llvm_select @2_0
- ---> Activating llvm_select @2_0
- ---> Cleaning llvm_select
- ---> Fetching archive for llvm-3.3
- ---> Attempting to fetch llvm-3.3-3.3_10.darwin_9.ppc.tbz2 from http://packages.macports.org/llvm-3.3
- ---> Attempting to fetch llvm-3.3-3.3_10.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/llvm-3.3
- ---> Installing llvm-3.3 @3.3_10
- ---> Activating llvm-3.3 @3.3_10
- ---> Cleaning llvm-3.3
- ---> Fetching archive for ld64-127
- ---> Attempting to fetch ld64-127-127.2_14+llvm33.darwin_9.ppc.tbz2 from http://packages.macports.org/ld64-127
- ---> Attempting to fetch ld64-127-127.2_14+llvm33.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/ld64-127
- ---> Installing ld64-127 @127.2_14+llvm33
- ---> Activating ld64-127 @127.2_14+llvm33
- ---> Cleaning ld64-127
- ---> Fetching archive for ld64
- ---> Attempting to fetch ld64-3_2+ld64_127.darwin_9.ppc.tbz2 from http://packages.macports.org/ld64
- ---> Attempting to fetch ld64-3_2+ld64_127.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/ld64
- ---> Attempting to fetch ld64-3_2+ld64_127.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/ld64
- ---> Fetching distfiles for ld64
- ---> Verifying checksums for ld64
- ---> Extracting ld64
- ---> Configuring ld64
- ---> Building ld64
- ---> Staging ld64 into destroot
- ---> Installing ld64 @3_2+ld64_127
- ---> Activating ld64 @3_2+ld64_127
- ---> Cleaning ld64
- ---> Fetching archive for gperf
- ---> Attempting to fetch gperf-3.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/gperf
- ---> Attempting to fetch gperf-3.1_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/gperf
- ---> Installing gperf @3.1_0
- ---> Activating gperf @3.1_0
- ---> Cleaning gperf
- ---> Fetching archive for libiconv
- ---> Attempting to fetch libiconv-1.16_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libiconv
- ---> Attempting to fetch libiconv-1.16_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libiconv
- ---> Attempting to fetch libiconv-1.16_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libiconv
- ---> Fetching distfiles for libiconv
- ---> Attempting to fetch libiconv-1.16.tar.gz from http://distfiles.macports.org/libiconv
- ---> Verifying checksums for libiconv
- ---> Extracting libiconv
- ---> Applying patches to libiconv
- ---> Configuring libiconv
- ---> Building libiconv
- ---> Staging libiconv into destroot
- ---> Installing libiconv @1.16_0
- ---> Activating libiconv @1.16_0
- ---> Cleaning libiconv
- ---> Fetching archive for mpfr
- ---> Attempting to fetch mpfr-4.0.2_0.darwin_9.ppc.tbz2 from http://packages.macports.org/mpfr
- ---> Attempting to fetch mpfr-4.0.2_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/mpfr
- ---> Installing mpfr @4.0.2_0
- ---> Activating mpfr @4.0.2_0
- ---> Cleaning mpfr
- ---> Fetching archive for libmpc
- ---> Attempting to fetch libmpc-1.1.0_1.darwin_9.ppc.tbz2 from http://packages.macports.org/libmpc
- ---> Attempting to fetch libmpc-1.1.0_1.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/libmpc
- ---> Installing libmpc @1.1.0_1
- ---> Activating libmpc @1.1.0_1
- ---> Cleaning libmpc
- ---> Fetching archive for ncurses
- ---> Attempting to fetch ncurses-6.2_0.darwin_9.ppc.tbz2 from http://packages.macports.org/ncurses
- ---> Attempting to fetch ncurses-6.2_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/ncurses
- ---> Attempting to fetch ncurses-6.2_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/ncurses
- ---> Fetching distfiles for ncurses
- ---> Attempting to fetch ncurses-6.2.tar.gz from http://distfiles.macports.org/ncurses
- ---> Verifying checksums for ncurses
- ---> Extracting ncurses
- ---> Applying patches to ncurses
- ---> Configuring ncurses
- ---> Building ncurses
- ---> Staging ncurses into destroot
- Warning: reinplace s|-Wl,-syslibroot,|| didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_ncurses/ncurses/work/destroot/opt/local/lib/pkgconfig/form.pc
- Warning: reinplace s|-Wl,-syslibroot,|| didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_ncurses/ncurses/work/destroot/opt/local/lib/pkgconfig/menu.pc
- Warning: reinplace s|-Wl,-syslibroot,|| didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_ncurses/ncurses/work/destroot/opt/local/lib/pkgconfig/ncurses.pc
- Warning: reinplace s|-Wl,-syslibroot,|| didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_ncurses/ncurses/work/destroot/opt/local/lib/pkgconfig/ncurses++.pc
- Warning: reinplace s|-Wl,-syslibroot,|| didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_ncurses/ncurses/work/destroot/opt/local/lib/pkgconfig/panel.pc
- Warning: reinplace s|-Wl,-syslibroot,|| didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_devel_ncurses/ncurses/work/destroot/opt/local/bin/ncurses6-config
- ---> Installing ncurses @6.2_0
- ---> Activating ncurses @6.2_0
- ---> Cleaning ncurses
- ---> Fetching archive for gettext
- ---> Attempting to fetch gettext-0.19.8.1_2.darwin_9.ppc.tbz2 from http://packages.macports.org/gettext
- ---> Attempting to fetch gettext-0.19.8.1_2.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/gettext
- ---> Attempting to fetch gettext-0.19.8.1_2.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/gettext
- ---> Fetching distfiles for gettext
- ---> Attempting to fetch gettext-0.19.8.1.tar.gz from http://distfiles.macports.org/gettext
- ---> Verifying checksums for gettext
- ---> Extracting gettext
- ---> Applying patches to gettext
- ---> Configuring gettext
- ---> Building gettext
- ---> Staging gettext into destroot
- ---> Installing gettext @0.19.8.1_2
- ---> Activating gettext @0.19.8.1_2
- ---> Cleaning gettext
- ---> Fetching archive for xz
- ---> Attempting to fetch xz-5.2.4_0.darwin_9.ppc.tbz2 from http://packages.macports.org/xz
- ---> Attempting to fetch xz-5.2.4_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/xz
- ---> Installing xz @5.2.4_0
- ---> Activating xz @5.2.4_0
- ---> Cleaning xz
- ---> Fetching archive for zlib
- ---> Attempting to fetch zlib-1.2.11_0.darwin_9.ppc.tbz2 from http://packages.macports.org/zlib
- ---> Attempting to fetch zlib-1.2.11_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/zlib
- ---> Installing zlib @1.2.11_0
- ---> Activating zlib @1.2.11_0
- ---> Cleaning zlib
- ---> Fetching archive for libgcc7
- ---> Attempting to fetch libgcc7-7.5.0_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libgcc7
- ---> Attempting to fetch libgcc7-7.5.0_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libgcc7
- ---> Attempting to fetch libgcc7-7.5.0_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libgcc7
- ---> Fetching distfiles for libgcc7
- ---> Attempting to fetch gcc-7.5.0.tar.xz from http://distfiles.macports.org/gcc7
- ---> Verifying checksums for libgcc7
- ---> Extracting libgcc7
- ---> Applying patches to libgcc7
- ---> Configuring libgcc7
- Error: libgcc7 cannot be built while libunwind-headers is active.
- Error: Please forcibly deactivate libunwind-headers, e.g. by running:
- Error:
- Error: sudo port -f deactivate libunwind-headers
- Error:
- Error: Then try again. You can reactivate libunwind-headers again later.
- Error: Failed to configure libgcc7: libunwind-headers is active
- Error: See /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_lang_gcc7/libgcc7/main.log for details.
- Error: Follow https://guide.macports.org/#project.tickets to report a bug.
- Error: Processing of port gsmartcontrol failed
- floogyss-Computer:~ floogy$ sudo port -f deactivate libunwind-headers
- Password:
- ---> Deactivating libunwind-headers @5.0.1_0
- ---> Cleaning libunwind-headers
- floogyss-Computer:~ floogy$
- floogyss-Computer:~ floogy$ sudo port install gsmartcontrol---> Computing dependencies for gsmartcontrol
- The following dependencies will be installed:
- Xft2
- at-spi2-atk
- at-spi2-core
- atk
- atkmm
- autoconf
- autoconf-archive
- automake
- bison
- bison-runtime
- bzip2
- cairo
- cairomm
- cmake
- coreutils
- curl
- curl-ca-bundle
- db48
- dbus
- docbook-xml
- docbook-xml-4.1.2
- docbook-xml-4.2
- docbook-xml-4.3
- docbook-xml-4.4
- docbook-xml-4.5
- docbook-xml-5.0
- docbook-xsl-nons
- doxygen
- expat
- flex
- fontconfig
- freetype
- fribidi
- gawk
- gcc6
- gcc7
- gd2
- gdbm
- gdk-pixbuf2
- giflib
- git
- glib2
- glibmm
- gnome-common
- gnutls
- gobject-introspection
- graphite2
- graphviz
- gsed
- gtk-doc
- gtk3
- gtkmm3
- gts
- harfbuzz
- hicolor-icon-theme
- icu
- intltool
- itstool
- jasper
- jpeg
- kerberos5
- legacy-support
- libLASi
- libarchive
- libcomerr
- libedit
- libepoxy
- libgcc
- libgcc6
- libgcc7
- libidn
- libidn2
- libnetpbm
- libpixman
- libpng
- libpsl
- libsigcxx2
- libtasn1
- libtool
- libunistring
- libuv
- libxml2
- libxslt
- lz4
- lzip
- lzo2
- m4
- mesa
- meson
- mm-common
- nettle
- ninja
- openssl
- ossp-uuid
- p11-kit
- p5.28-authen-sasl
- p5.28-cgi
- p5.28-cpan-meta
- p5.28-cpan-meta-requirements
- p5.28-cpan-meta-yaml
- p5.28-data-dump
- p5.28-devel-checkbin
- p5.28-digest-hmac
- p5.28-digest-sha1
- p5.28-encode
- p5.28-encode-locale
- p5.28-error
- p5.28-extutils-config
- p5.28-extutils-helpers
- p5.28-extutils-install
- p5.28-extutils-installpaths
- p5.28-extutils-makemaker
- p5.28-extutils-manifest
- p5.28-file-listing
- p5.28-getopt-long
- p5.28-gssapi
- p5.28-html-form
- p5.28-html-parser
- p5.28-html-tagset
- p5.28-http-cookies
- p5.28-http-daemon
- p5.28-http-date
- p5.28-http-message
- p5.28-http-negotiate
- p5.28-inc-latest
- p5.28-io
- p5.28-io-html
- p5.28-io-socket-inet6
- p5.28-io-socket-ip
- p5.28-io-socket-ssl
- p5.28-libwww-perl
- p5.28-lwp-mediatypes
- p5.28-lwp-protocol-https
- p5.28-module-build
- p5.28-module-build-tiny
- p5.28-module-metadata
- p5.28-mozilla-ca
- p5.28-net-http
- p5.28-net-libidn
- p5.28-net-smtp-ssl
- p5.28-net-ssleay
- p5.28-pathtools
- p5.28-perl-ostype
- p5.28-pod-escapes
- p5.28-pod-simple
- p5.28-podlators
- p5.28-scalar-list-utils
- p5.28-socket
- p5.28-socket6
- p5.28-sub-name
- p5.28-sub-uplevel
- p5.28-term-readkey
- p5.28-test-deep
- p5.28-test-exception
- p5.28-test-fatal
- p5.28-test-harness
- p5.28-test-leaktrace
- p5.28-test-needs
- p5.28-test-nowarnings
- p5.28-test-requiresinternet
- p5.28-test-warn
- p5.28-time-local
- p5.28-timedate
- p5.28-try-tiny
- p5.28-uri
- p5.28-version
- p5.28-www-robotrules
- p5.28-xml-parser
- pango
- pangomm
- pcre
- pcre2
- perl5
- perl5.28
- pkgconfig
- popt
- py27-libxml2
- py38-anytree
- py38-beaker
- py38-lxml
- py38-mako
- py38-markdown
- py38-markupsafe
- py38-pygments
- py38-setuptools
- py38-six
- pygments_select
- python27
- python2_select
- python37
- python38
- python3_select
- python_select
- re2c
- readline
- rsync
- shared-mime-info
- smartmontools
- sqlite3
- tiff
- urw-fonts
- webp
- wget
- xmlcatmgr
- xorg-libX11
- xorg-libXau
- xorg-libXaw
- xorg-libXcomposite
- xorg-libXcursor
- xorg-libXdamage
- xorg-libXdmcp
- xorg-libXext
- xorg-libXfixes
- xorg-libXi
- xorg-libXinerama
- xorg-libXmu
- xorg-libXrandr
- xorg-libXt
- xorg-libXtst
- xorg-libXxf86vm
- xorg-libice
- xorg-libpthread-stubs
- xorg-libsm
- xorg-libxcb
- xorg-util-macros
- xorg-xcb-proto
- xorg-xcb-util
- xorg-xorgproto
- xorg-xtrans
- xpm
- xrender
- zstd
- Continue? [Y/n]:
- ---> Fetching archive for libgcc7
- ---> Attempting to fetch libgcc7-7.5.0_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libgcc7
- ---> Attempting to fetch libgcc7-7.5.0_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libgcc7
- ---> Attempting to fetch libgcc7-7.5.0_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libgcc7
- ---> Configuring libgcc7
- ---> Building libgcc7
- ---> Staging libgcc7 into destroot
- ---> Installing libgcc7 @7.5.0_0
- ---> Activating libgcc7 @7.5.0_0
- ---> Cleaning libgcc7
- ---> Fetching archive for libgcc6
- ---> Attempting to fetch libgcc6-6.5.0_4.darwin_9.ppc.tbz2 from http://packages.macports.org/libgcc6
- ---> Attempting to fetch libgcc6-6.5.0_4.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libgcc6
- ---> Attempting to fetch libgcc6-6.5.0_4.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libgcc6
- ---> Fetching distfiles for libgcc6
- ---> Attempting to fetch gcc-6.5.0.tar.xz from http://distfiles.macports.org/gcc6
- ---> Verifying checksums for libgcc6
- ---> Extracting libgcc6
- ---> Applying patches to libgcc6
- ---> Configuring libgcc6
- ---> Building libgcc6
- ^CError: Aborted: SIGINT received.
- [/CODE]
- [/SPOILER]
- [SPOILER="gsmartcontrol II"]
- [CODE]Last login: Tue Mar 3 03:32:55 on console
- You have new mail.
- floogys-Computer:~ floogy$ sudo port install gsmartcontrol
- Password:
- ---> Computing dependencies for gsmartcontrol
- The following dependencies will be installed:
- Xft2
- at-spi2-atk
- at-spi2-core
- atk
- atkmm
- autoconf
- autoconf-archive
- automake
- bison
- bison-runtime
- bzip2
- cairo
- cairomm
- cmake
- coreutils
- curl
- curl-ca-bundle
- db48
- dbus
- docbook-xml
- docbook-xml-4.1.2
- docbook-xml-4.2
- docbook-xml-4.3
- docbook-xml-4.4
- docbook-xml-4.5
- docbook-xml-5.0
- docbook-xsl-nons
- doxygen
- expat
- flex
- fontconfig
- freetype
- fribidi
- gawk
- gcc6
- gcc7
- gd2
- gdbm
- gdk-pixbuf2
- giflib
- git
- glib2
- glibmm
- gnome-common
- gnutls
- gobject-introspection
- graphite2
- graphviz
- gsed
- gtk-doc
- gtk3
- gtkmm3
- gts
- harfbuzz
- hicolor-icon-theme
- icu
- intltool
- itstool
- jasper
- jpeg
- kerberos5
- legacy-support
- libLASi
- libarchive
- libcomerr
- libedit
- libepoxy
- libgcc6
- libidn
- libidn2
- libnetpbm
- libpixman
- libpng
- libpsl
- libsigcxx2
- libtasn1
- libtool
- libunistring
- libuv
- libxml2
- libxslt
- lz4
- lzip
- lzo2
- m4
- mesa
- meson
- mm-common
- nettle
- ninja
- openssl
- ossp-uuid
- p11-kit
- p5.28-authen-sasl
- p5.28-cgi
- p5.28-cpan-meta
- p5.28-cpan-meta-requirements
- p5.28-cpan-meta-yaml
- p5.28-data-dump
- p5.28-devel-checkbin
- p5.28-digest-hmac
- p5.28-digest-sha1
- p5.28-encode
- p5.28-encode-locale
- p5.28-error
- p5.28-extutils-config
- p5.28-extutils-helpers
- p5.28-extutils-install
- p5.28-extutils-installpaths
- p5.28-extutils-makemaker
- p5.28-extutils-manifest
- p5.28-file-listing
- p5.28-getopt-long
- p5.28-gssapi
- p5.28-html-form
- p5.28-html-parser
- p5.28-html-tagset
- p5.28-http-cookies
- p5.28-http-daemon
- p5.28-http-date
- p5.28-http-message
- p5.28-http-negotiate
- p5.28-inc-latest
- p5.28-io
- p5.28-io-html
- p5.28-io-socket-inet6
- p5.28-io-socket-ip
- p5.28-io-socket-ssl
- p5.28-libwww-perl
- p5.28-lwp-mediatypes
- p5.28-lwp-protocol-https
- p5.28-module-build
- p5.28-module-build-tiny
- p5.28-module-metadata
- p5.28-mozilla-ca
- p5.28-net-http
- p5.28-net-libidn
- p5.28-net-smtp-ssl
- p5.28-net-ssleay
- p5.28-pathtools
- p5.28-perl-ostype
- p5.28-pod-escapes
- p5.28-pod-simple
- p5.28-podlators
- p5.28-scalar-list-utils
- p5.28-socket
- p5.28-socket6
- p5.28-sub-name
- p5.28-sub-uplevel
- p5.28-term-readkey
- p5.28-test-deep
- p5.28-test-exception
- p5.28-test-fatal
- p5.28-test-harness
- p5.28-test-leaktrace
- p5.28-test-needs
- p5.28-test-nowarnings
- p5.28-test-requiresinternet
- p5.28-test-warn
- p5.28-time-local
- p5.28-timedate
- p5.28-try-tiny
- p5.28-uri
- p5.28-version
- p5.28-www-robotrules
- p5.28-xml-parser
- pango
- pangomm
- pcre
- pcre2
- perl5
- perl5.28
- pkgconfig
- popt
- py27-libxml2
- py38-anytree
- py38-beaker
- py38-lxml
- py38-mako
- py38-markdown
- py38-markupsafe
- py38-pygments
- py38-setuptools
- py38-six
- pygments_select
- python27
- python2_select
- python37
- python38
- python3_select
- python_select
- re2c
- readline
- rsync
- shared-mime-info
- smartmontools
- sqlite3
- tiff
- urw-fonts
- webp
- wget
- xmlcatmgr
- xorg-libX11
- xorg-libXau
- xorg-libXaw
- xorg-libXcomposite
- xorg-libXcursor
- xorg-libXdamage
- xorg-libXdmcp
- xorg-libXext
- xorg-libXfixes
- xorg-libXi
- xorg-libXinerama
- xorg-libXmu
- xorg-libXrandr
- xorg-libXt
- xorg-libXtst
- xorg-libXxf86vm
- xorg-libice
- xorg-libpthread-stubs
- xorg-libsm
- xorg-libxcb
- xorg-util-macros
- xorg-xcb-proto
- xorg-xcb-util
- xorg-xorgproto
- xorg-xtrans
- xpm
- xrender
- zstd
- Continue? [Y/n]: y
- ---> Fetching archive for libgcc6
- ---> Attempting to fetch libgcc6-6.5.0_4.darwin_9.ppc.tbz2 from http://packages.macports.org/libgcc6
- ---> Attempting to fetch libgcc6-6.5.0_4.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libgcc6
- ---> Attempting to fetch libgcc6-6.5.0_4.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libgcc6
- ---> Building libgcc6
- ---> Staging libgcc6 into destroot
- ---> Installing libgcc6 @6.5.0_4
- ---> Activating libgcc6 @6.5.0_4
- ---> Cleaning libgcc6
- ---> Fetching archive for gcc6
- ---> Attempting to fetch gcc6-6.5.0_5.darwin_9.ppc.tbz2 from http://packages.macports.org/gcc6
- ---> Attempting to fetch gcc6-6.5.0_5.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/gcc6
- ---> Attempting to fetch gcc6-6.5.0_5.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/gcc6
- ---> Fetching distfiles for gcc6
- ---> Verifying checksums for gcc6
- ---> Extracting gcc6
- ---> Applying patches to gcc6
- ---> Configuring gcc6
- ---> Building gcc6
- ---> Staging gcc6 into destroot
- ---> Installing gcc6 @6.5.0_5
- ---> Activating gcc6 @6.5.0_5
- ---> Cleaning gcc6
- ---> Fetching archive for expat
- ---> Attempting to fetch expat-2.2.9_0.darwin_9.ppc.tbz2 from http://packages.macports.org/expat
- ---> Attempting to fetch expat-2.2.9_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/expat
- ---> Attempting to fetch expat-2.2.9_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/expat
- ---> Fetching distfiles for expat
- ---> Attempting to fetch expat-2.2.9.tar.bz2 from http://distfiles.macports.org/expat
- ---> Verifying checksums for expat
- ---> Extracting expat
- ---> Configuring expat
- ---> Building expat
- ---> Staging expat into destroot
- ---> Installing expat @2.2.9_0
- ---> Activating expat @2.2.9_0
- ---> Cleaning expat
- ---> Fetching archive for pkgconfig
- ---> Attempting to fetch pkgconfig-0.29.2_0.darwin_9.ppc.tbz2 from http://packages.macports.org/pkgconfig
- ---> Attempting to fetch pkgconfig-0.29.2_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/pkgconfig
- ---> Installing pkgconfig @0.29.2_0
- ---> Activating pkgconfig @0.29.2_0
- ---> Cleaning pkgconfig
- ---> Fetching archive for dbus
- ---> Attempting to fetch dbus-1.12.16_0.darwin_9.ppc.tbz2 from http://packages.macports.org/dbus
- ---> Attempting to fetch dbus-1.12.16_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/dbus
- ---> Attempting to fetch dbus-1.12.16_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/dbus
- ---> Fetching distfiles for dbus
- ---> Attempting to fetch dbus-1.12.16.tar.gz from http://distfiles.macports.org/dbus
- ---> Verifying checksums for dbus
- ---> Extracting dbus
- ---> Applying patches to dbus
- ---> Configuring dbus
- ---> Building dbus
- ---> Staging dbus into destroot
- ---> Installing dbus @1.12.16_0
- ---> Activating dbus @1.12.16_0
- ---> Cleaning dbus
- ---> Fetching archive for bzip2
- ---> Attempting to fetch bzip2-1.0.8_0.darwin_9.ppc.tbz2 from http://packages.macports.org/bzip2
- ---> Attempting to fetch bzip2-1.0.8_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/bzip2
- ---> Attempting to fetch bzip2-1.0.8_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/bzip2
- ---> Fetching distfiles for bzip2
- ---> Attempting to fetch bzip2-1.0.8.tar.gz from http://distfiles.macports.org/bzip2
- ---> Verifying checksums for bzip2
- ---> Extracting bzip2
- ---> Applying patches to bzip2
- ---> Configuring bzip2
- ---> Building bzip2
- ---> Staging bzip2 into destroot
- ---> Installing bzip2 @1.0.8_0
- ---> Activating bzip2 @1.0.8_0
- ---> Cleaning bzip2
- ---> Fetching archive for libedit
- ---> Attempting to fetch libedit-20191231-3.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libedit
- ---> Attempting to fetch libedit-20191231-3.1_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libedit
- ---> Attempting to fetch libedit-20191231-3.1_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libedit
- ---> Fetching distfiles for libedit
- ---> Attempting to fetch libedit-20191231-3.1.tar.gz from http://distfiles.macports.org/libedit
- ---> Verifying checksums for libedit
- ---> Extracting libedit
- ---> Applying patches to libedit
- ---> Configuring libedit
- ---> Building libedit
- ---> Staging libedit into destroot
- ---> Installing libedit @20191231-3.1_0
- ---> Activating libedit @20191231-3.1_0
- ---> Cleaning libedit
- ---> Fetching archive for pcre
- ---> Attempting to fetch pcre-8.44_0.darwin_9.ppc.tbz2 from http://packages.macports.org/pcre
- ---> Attempting to fetch pcre-8.44_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/pcre
- ---> Attempting to fetch pcre-8.44_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/pcre
- ---> Fetching distfiles for pcre
- ---> Attempting to fetch pcre-8.44.tar.bz2 from http://distfiles.macports.org/pcre
- ---> Verifying checksums for pcre
- ---> Extracting pcre
- ---> Applying patches to pcre
- ---> Configuring pcre
- ---> Building pcre
- ---> Staging pcre into destroot
- ---> Installing pcre @8.44_0
- ---> Activating pcre @8.44_0
- ---> Cleaning pcre
- ---> Fetching archive for db48
- ---> Attempting to fetch db48-4.8.30_4+java.darwin_9.ppc.tbz2 from http://packages.macports.org/db48
- ---> Attempting to fetch db48-4.8.30_4+java.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/db48
- ---> Installing db48 @4.8.30_4+java
- ---> Activating db48 @4.8.30_4+java
- ---> Cleaning db48
- ---> Fetching archive for readline
- ---> Attempting to fetch readline-8.0.000_0.darwin_9.ppc.tbz2 from http://packages.macports.org/readline
- ---> Attempting to fetch readline-8.0.000_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/readline
- ---> Installing readline @8.0.000_0
- ---> Activating readline @8.0.000_0
- ---> Cleaning readline
- ---> Fetching archive for gdbm
- ---> Attempting to fetch gdbm-1.18.1_1.darwin_9.ppc.tbz2 from http://packages.macports.org/gdbm
- ---> Attempting to fetch gdbm-1.18.1_1.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/gdbm
- ---> Installing gdbm @1.18.1_1
- ---> Activating gdbm @1.18.1_1
- ---> Cleaning gdbm
- ---> Fetching archive for perl5.28
- ---> Attempting to fetch perl5.28-5.28.2_2.darwin_9.ppc.tbz2 from http://packages.macports.org/perl5.28
- ---> Attempting to fetch perl5.28-5.28.2_2.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/perl5.28
- ---> Attempting to fetch perl5.28-5.28.2_2.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/perl5.28
- ---> Fetching distfiles for perl5.28
- ---> Attempting to fetch perl-5.28.2.tar.xz from http://distfiles.macports.org/perl5.28
- ---> Verifying checksums for perl5.28
- ---> Extracting perl5.28
- ---> Applying patches to perl5.28
- ---> Configuring perl5.28
- ---> Building perl5.28
- ---> Staging perl5.28 into destroot
- ---> Installing perl5.28 @5.28.2_2
- ---> Activating perl5.28 @5.28.2_2
- ---> Cleaning perl5.28
- ---> Fetching archive for perl5
- ---> Attempting to fetch perl5-5.26.1_0+perl5_28.darwin_9.noarch.tbz2 from http://packages.macports.org/perl5
- ---> Attempting to fetch perl5-5.26.1_0+perl5_28.darwin_9.noarch.tbz2 from http://lil.fr.packages.macports.org/perl5
- ---> Attempting to fetch perl5-5.26.1_0+perl5_28.darwin_9.noarch.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/perl5
- ---> Fetching distfiles for perl5
- ---> Verifying checksums for perl5
- ---> Extracting perl5
- ---> Configuring perl5
- ---> Building perl5
- ---> Staging perl5 into destroot
- ---> Installing perl5 @5.26.1_0+perl5_28
- ---> Activating perl5 @5.26.1_0+perl5_28
- ---> Cleaning perl5
- ---> Fetching archive for openssl
- ---> Attempting to fetch openssl-1.1.1d_0.darwin_9.ppc.tbz2 from http://packages.macports.org/openssl
- ---> Attempting to fetch openssl-1.1.1d_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/openssl
- ---> Attempting to fetch openssl-1.1.1d_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/openssl
- ---> Fetching distfiles for openssl
- ---> Attempting to fetch openssl-1.1.1d.tar.gz from http://distfiles.macports.org/openssl
- ---> Verifying checksums for openssl
- ---> Extracting openssl
- ---> Configuring openssl
- ---> Building openssl
- ---> Staging openssl into destroot
- ---> Installing openssl @1.1.1d_0
- ---> Activating openssl @1.1.1d_0
- ---> Cleaning openssl
- ---> Fetching archive for python2_select
- ---> Attempting to fetch python2_select-0.0_3.darwin_9.noarch.tbz2 from http://packages.macports.org/python2_select
- ---> Attempting to fetch python2_select-0.0_3.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/python2_select
- ---> Installing python2_select @0.0_3
- ---> Activating python2_select @0.0_3
- ---> Cleaning python2_select
- ---> Fetching archive for python_select
- ---> Attempting to fetch python_select-0.3_8.darwin_9.noarch.tbz2 from http://packages.macports.org/python_select
- ---> Attempting to fetch python_select-0.3_8.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/python_select
- ---> Installing python_select @0.3_8
- ---> Activating python_select @0.3_8
- ---> Cleaning python_select
- ---> Fetching archive for sqlite3
- ---> Attempting to fetch sqlite3-3.31.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/sqlite3
- ---> Attempting to fetch sqlite3-3.31.1_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/sqlite3
- ---> Attempting to fetch sqlite3-3.31.1_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/sqlite3
- ---> Fetching distfiles for sqlite3
- ---> Attempting to fetch sqlite-autoconf-3310100.tar.gz from http://distfiles.macports.org/sqlite3
- ---> Verifying checksums for sqlite3
- ---> Extracting sqlite3
- ---> Configuring sqlite3
- ---> Building sqlite3
- ---> Staging sqlite3 into destroot
- ---> Installing sqlite3 @3.31.1_0
- ---> Activating sqlite3 @3.31.1_0
- ---> Cleaning sqlite3
- ---> Fetching archive for python27
- ---> Attempting to fetch python27-2.7.17_0.darwin_9.ppc.tbz2 from http://packages.macports.org/python27
- ---> Attempting to fetch python27-2.7.17_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/python27
- ---> Attempting to fetch python27-2.7.17_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/python27
- ---> Fetching distfiles for python27
- ---> Attempting to fetch Python-2.7.17.tar.xz from https://www.python.org/ftp/python/2.7.17/
- ---> Attempting to fetch Python-2.7.17.tar.xz from http://distfiles.macports.org/python27
- ---> Verifying checksums for python27
- ---> Extracting python27
- ---> Applying patches to python27
- ---> Configuring python27
- Warning: reinplace s;/* #undef PY_FORMAT_LONG_LONG */;#define PY_FORMAT_LONG_LONG "ll"; didn't change anything in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_lang_python27/python27/work/Python-2.7.17/pyconfig.h
- ---> Building python27
- ---> Staging python27 into destroot
- ---> Installing python27 @2.7.17_0
- ---> Activating python27 @2.7.17_0
- ---> Cleaning python27
- ---> Fetching archive for glib2
- ---> Attempting to fetch glib2-2.58.3_0+x11.darwin_9.ppc.tbz2 from http://packages.macports.org/glib2
- ---> Attempting to fetch glib2-2.58.3_0+x11.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/glib2
- ---> Installing glib2 @2.58.3_0+x11
- ---> Activating glib2 @2.58.3_0+x11
- ---> Cleaning glib2
- ---> Fetching archive for autoconf
- ---> Attempting to fetch autoconf-2.69_5.darwin_9.noarch.tbz2 from http://packages.macports.org/autoconf
- ---> Attempting to fetch autoconf-2.69_5.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/autoconf
- ---> Installing autoconf @2.69_5
- ---> Activating autoconf @2.69_5
- ---> Cleaning autoconf
- ---> Fetching archive for autoconf-archive
- ---> Attempting to fetch autoconf-archive-2019.01.06_0.darwin_9.noarch.tbz2 from http://packages.macports.org/autoconf-archive
- ---> Attempting to fetch autoconf-archive-2019.01.06_0.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/autoconf-archive
- ---> Installing autoconf-archive @2019.01.06_0
- ---> Activating autoconf-archive @2019.01.06_0
- ---> Cleaning autoconf-archive
- ---> Fetching archive for automake
- ---> Attempting to fetch automake-1.16.1_1.darwin_9.noarch.tbz2 from http://packages.macports.org/automake
- ---> Attempting to fetch automake-1.16.1_1.darwin_9.noarch.tbz2 from http://lil.fr.packages.macports.org/automake
- ---> Attempting to fetch automake-1.16.1_1.darwin_9.noarch.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/automake
- ---> Fetching distfiles for automake
- ---> Attempting to fetch automake-1.16.1.tar.gz from http://distfiles.macports.org/automake
- ---> Verifying checksums for automake
- ---> Extracting automake
- ---> Applying patches to automake
- ---> Configuring automake
- ---> Building automake
- ---> Staging automake into destroot
- ---> Installing automake @1.16.1_1
- ---> Activating automake @1.16.1_1
- ---> Cleaning automake
- ---> Fetching archive for libpng
- ---> Attempting to fetch libpng-1.6.37_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libpng
- ---> Attempting to fetch libpng-1.6.37_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libpng
- ---> Attempting to fetch libpng-1.6.37_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libpng
- ---> Fetching distfiles for libpng
- ---> Attempting to fetch libpng-1.6.37.tar.xz from http://distfiles.macports.org/libpng
- ---> Verifying checksums for libpng
- ---> Extracting libpng
- ---> Applying patches to libpng
- ---> Configuring libpng
- ---> Building libpng
- ---> Staging libpng into destroot
- ---> Installing libpng @1.6.37_0
- ---> Activating libpng @1.6.37_0
- ---> Cleaning libpng
- ---> Fetching archive for freetype
- ---> Attempting to fetch freetype-2.10.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/freetype
- ---> Attempting to fetch freetype-2.10.1_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/freetype
- ---> Attempting to fetch freetype-2.10.1_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/freetype
- ---> Fetching distfiles for freetype
- ---> Attempting to fetch freetype-2.10.1.tar.xz from http://distfiles.macports.org/freetype
- ---> Attempting to fetch freetype-doc-2.10.1.tar.xz from http://distfiles.macports.org/freetype
- ---> Verifying checksums for freetype
- ---> Extracting freetype
- ---> Applying patches to freetype
- ---> Configuring freetype
- ---> Building freetype
- ---> Staging freetype into destroot
- ---> Installing freetype @2.10.1_0
- ---> Activating freetype @2.10.1_0
- ---> Cleaning freetype
- ---> Fetching archive for ossp-uuid
- ---> Attempting to fetch ossp-uuid-1.6.2_11+perl5_28.darwin_9.ppc.tbz2 from http://packages.macports.org/ossp-uuid
- ---> Attempting to fetch ossp-uuid-1.6.2_11+perl5_28.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/ossp-uuid
- ---> Attempting to fetch ossp-uuid-1.6.2_11+perl5_28.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/ossp-uuid
- ---> Fetching distfiles for ossp-uuid
- ---> Attempting to fetch uuid-1.6.2.tar.gz from http://distfiles.macports.org/ossp-uuid
- ---> Verifying checksums for ossp-uuid
- ---> Extracting ossp-uuid
- ---> Applying patches to ossp-uuid
- ---> Configuring ossp-uuid
- ---> Building ossp-uuid
- ---> Staging ossp-uuid into destroot
- ---> Installing ossp-uuid @1.6.2_11+perl5_28
- ---> Activating ossp-uuid @1.6.2_11+perl5_28
- ---> Cleaning ossp-uuid
- ---> Fetching archive for fontconfig
- ---> Attempting to fetch fontconfig-2.13.1_0.darwin_9.ppc.tbz2 from http://packages.macports.org/fontconfig
- ---> Attempting to fetch fontconfig-2.13.1_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/fontconfig
- ---> Installing fontconfig @2.13.1_0
- ---> Activating fontconfig @2.13.1_0
- ---> Cleaning fontconfig
- ---> Fetching archive for libpixman
- ---> Attempting to fetch libpixman-0.38.4_0.darwin_9.ppc.tbz2 from http://packages.macports.org/libpixman
- ---> Attempting to fetch libpixman-0.38.4_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libpixman
- ---> Attempting to fetch libpixman-0.38.4_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libpixman
- ---> Fetching distfiles for libpixman
- ---> Attempting to fetch pixman-0.38.4.tar.bz2 from http://distfiles.macports.org/libpixman-devel
- ---> Verifying checksums for libpixman
- ---> Extracting libpixman
- ---> Applying patches to libpixman
- ---> Configuring libpixman
- ---> Building libpixman
- ---> Staging libpixman into destroot
- ---> Installing libpixman @0.38.4_0
- ---> Activating libpixman @0.38.4_0
- ---> Cleaning libpixman
- ---> Fetching archive for xorg-xorgproto
- ---> Attempting to fetch xorg-xorgproto-2019.2_0.darwin_9.noarch.tbz2 from http://packages.macports.org/xorg-xorgproto
- ---> Attempting to fetch xorg-xorgproto-2019.2_0.darwin_9.noarch.tbz2 from http://lil.fr.packages.macports.org/xorg-xorgproto
- ---> Attempting to fetch xorg-xorgproto-2019.2_0.darwin_9.noarch.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/xorg-xorgproto
- ---> Fetching distfiles for xorg-xorgproto
- ---> Attempting to fetch xorgproto-2019.2.tar.bz2 from http://distfiles.macports.org/xorg-xorgproto
- ---> Verifying checksums for xorg-xorgproto
- ---> Extracting xorg-xorgproto
- ---> Configuring xorg-xorgproto
- ---> Building xorg-xorgproto
- ---> Staging xorg-xorgproto into destroot
- ---> Installing xorg-xorgproto @2019.2_0
- ---> Activating xorg-xorgproto @2019.2_0
- ---> Cleaning xorg-xorgproto
- ---> Fetching archive for xorg-libXau
- ---> Attempting to fetch xorg-libXau-1.0.9_0.darwin_9.ppc.tbz2 from http://packages.macports.org/xorg-libXau
- ---> Attempting to fetch xorg-libXau-1.0.9_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/xorg-libXau
- ---> Installing xorg-libXau @1.0.9_0
- ---> Activating xorg-libXau @1.0.9_0
- ---> Cleaning xorg-libXau
- ---> Fetching archive for xorg-libXdmcp
- ---> Attempting to fetch xorg-libXdmcp-1.1.3_0.darwin_9.ppc.tbz2 from http://packages.macports.org/xorg-libXdmcp
- ---> Attempting to fetch xorg-libXdmcp-1.1.3_0.darwin_9.ppc.tbz2.rmd160 from http://packages.macports.org/xorg-libXdmcp
- ---> Installing xorg-libXdmcp @1.1.3_0
- ---> Activating xorg-libXdmcp @1.1.3_0
- ---> Cleaning xorg-libXdmcp
- ---> Fetching archive for python3_select
- ---> Attempting to fetch python3_select-0.0_1.darwin_9.noarch.tbz2 from http://packages.macports.org/python3_select
- ---> Attempting to fetch python3_select-0.0_1.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/python3_select
- ---> Installing python3_select @0.0_1
- ---> Activating python3_select @0.0_1
- ---> Cleaning python3_select
- ---> Fetching archive for python37
- ---> Attempting to fetch python37-3.7.6_0.darwin_9.ppc.tbz2 from http://packages.macports.org/python37
- ---> Attempting to fetch python37-3.7.6_0.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/python37
- ---> Attempting to fetch python37-3.7.6_0.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/python37
- ---> Fetching distfiles for python37
- ---> Attempting to fetch Python-3.7.6.tar.xz from https://www.python.org/ftp/python/3.7.6/
- ---> Attempting to fetch Python-3.7.6.tar.xz from http://distfiles.macports.org/python37
- ---> Verifying checksums for python37
- ---> Extracting python37
- ---> Applying patches to python37
- ---> Configuring python37
- ---> Building python37
- ---> Staging python37 into destroot
- ---> Installing python37 @3.7.6_0
- ---> Activating python37 @3.7.6_0
- ---> Cleaning python37
- ---> Fetching archive for xorg-libpthread-stubs
- ---> Attempting to fetch xorg-libpthread-stubs-0.4_0.darwin_9.noarch.tbz2 from http://packages.macports.org/xorg-libpthread-stubs
- ---> Attempting to fetch xorg-libpthread-stubs-0.4_0.darwin_9.noarch.tbz2.rmd160 from http://packages.macports.org/xorg-libpthread-stubs
- ---> Installing xorg-libpthread-stubs @0.4_0
- ---> Activating xorg-libpthread-stubs @0.4_0
- ---> Cleaning xorg-libpthread-stubs
- ---> Fetching archive for libtool
- ---> Attempting to fetch libtool-2.4.6_6.darwin_9.ppc.tbz2 from http://packages.macports.org/libtool
- ---> Attempting to fetch libtool-2.4.6_6.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/libtool
- ---> Attempting to fetch libtool-2.4.6_6.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/libtool
- ---> Fetching distfiles for libtool
- ---> Attempting to fetch libtool-2.4.6.tar.gz from http://distfiles.macports.org/libtool
- ---> Verifying checksums for libtool
- ---> Extracting libtool
- ---> Applying patches to libtool
- ---> Configuring libtool
- ---> Building libtool
- ---> Staging libtool into destroot
- ---> Installing libtool @2.4.6_6
- ---> Activating libtool @2.4.6_6
- ---> Cleaning libtool
- ---> Fetching archive for gcc7
- ---> Attempting to fetch gcc7-7.5.0_1.darwin_9.ppc.tbz2 from http://packages.macports.org/gcc7
- ---> Attempting to fetch gcc7-7.5.0_1.darwin_9.ppc.tbz2 from http://lil.fr.packages.macports.org/gcc7
- ---> Attempting to fetch gcc7-7.5.0_1.darwin_9.ppc.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/gcc7
- ---> Fetching distfiles for gcc7
- ---> Verifying checksums for gcc7
- ---> Extracting gcc7
- ---> Applying patches to gcc7
- ---> Configuring gcc7
- ---> Building gcc7
- [/CODE]
- [/SPOILER]
- Mi 4 Mär 2020 13:32:08 CET
- 13:32 up 1 day, 10 hrs, 3 users, load averages: 1,13 1,10 1,08
- [SPOILER="TOP"]
- [CODE]Processes: 62 total, 3 running, 59 sleeping... 224 threads
- 13:34:25
- Load Avg: 1.10, 1.09, 1.08
- CPU usage: 100.00% user, 0.00% sys, 0.00% idle
- SharedLibs: num = 6, resident = 40M code, 0 data, 2952K linkedit.
- MemRegions: num = 17376, resident = 121M + 6812K private, 57M shared.
- PhysMem: 120M wired, 252M active, 50M inactive, 422M used, 346M free.
- VM: 4581M + 147M 2009104(0) pageins, 376991(0) pageouts
- PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
- 98459 AppleSpell 0.0% 0:00.07 1 22+ 32 0 1888K+ 456K+ 33M+
- 97901 bash 0.0% 0:00.18 1 14+ 20 260K+ 800K+ 724K+ 18M+
- 97900 login 0.0% 0:00.16 1 17+ 50 0 200K+ 372K+ 19M+
- 96716 SMARTRepor 0.0% 0:19.10 2 82+ 166 1484K+ 4144K+ 2336K+ 151M+
- 96149 gnumake 0.0% 0:00.33 1 13+ 21 1964K+ 340K+ 2332K+ 75M+
- 96081 sh 0.0% 0:00.03 1 13+ 19 384K+ 652K+ 904K+ 74M+
- 43644 ATSServer 0.0% 0:06.13 2 67+ 83 136K+ 1164K+ 544K+ 36M+
- 43569 gnumake 0.0% 0:00.26 1 13+ 21 1256K+ 340K+ 924K+ 75M+
- 43432 sh 0.0% 0:00.06 1 14+ 19 0 652K+ 180K+ 74M+
- 43422 gnumake 0.0% 0:00.23 1 13+ 22 0 340K+ 172K+ 19M+
- 43421 sh 20H0.0% 0:00.03 1 14+ 19 0 652K+ 180K+ 18M+
- 14953 top 20H0.0% 0:00.10 1 17+ 27 888K+ 272K+ 1416K+ 18M+
- 14952 smbclient 0.0% 0:00.15 1 14+ 32 400K+ 792K+ 1268K+ 20M+
- 14948 cc1plus 0.0% 0:53.86 1 13+ 156 60M+ 27M+ 77M+ 185M+
- 14947 xg++ 0.0% 0:00.02 1 13+ 30 220K+ 1480K+ 1136K+ 84M+
- 14936 mdworker 0.0% 0:00.32 3 51+ 37 632K+ 1488K+ 2216K+ 31M+
- 13900 gnumake C0.0% 0:02.22 1 13+ 33 10M+ 392K+ 10M+ 79M+
- 13862 sh 0.0% 0:00.07 1 13+ 19 704K+ 652K+ 1208K+ 74M+
- 217 mdworker 0.0% 15:24.24 5 80+ 279 3068K+ 1788K+ 4944K+ 101M+
- 166 tclsh8.5 0.0% 10:49.21 1 37+ 11703 1284K+ 616K+ 1412K+ 737M+
- 156 bash 0.0% 0:00.04 1 14+ 20 0 800K+ 40K+ 18M+
- 155 login 0.0% 0:00.06 1 17+ 50 0 200K+ 40K+ 19M+
- 154 Terminal 0.0% 0:33.84 11 158+ 163 2224K+ 7996K+ 8920K+ 156M+
- 141 iTunesHelp 0.0% 0:00.23 2 42+ 39 236K+ 1264K+ 352K+ 92M+
- 114 SmartDaemo 0.0% 0:17.94 5 104+ 115 988K+ 3320K+ 1940K+ 122M+
- 100 coreaudiod 0.0% 0:00.54 2 122+ 57 1044K+ 844K+ 1328K+ 21M+
- 99 Finder 0.0% 2:09.55 9 202+ 242 2672K+ 7656K+ 5312K+ 174M+
- 98 SystemUISe 0.0% 0:34.84 6 266+ 254 1976K+ 5744K+ 3832K+ 149M+
- 97 ATSServer 0.0% 0:18.43 2 92+ 107 1596K+ 2224K+ 1724K+ 48M+
- 95 Dock 0.0% 0:12.39 3 127+ 292 1736K+ 6260K+ 2744K+ 165M+
- 94 pboard 0.0% 0:00.01 1 15+ 26 32K+ 196K+ 40K+ 19M+
- 93 UserEventA 0.0% 0:02.99 3 146+ 90 408K+ 1564K+ 924K+ 95M+
- 92 Spotlight 0.0% 0:19.42 2 80+ 130 1084K+ 4436K+ 2544K+ 142M+
- 88 AirPort Ba 0.0% 0:00.49 2 58+ 79 520K+ 2316K+ 676K+ 112M+
- 69 launchd 0.0% 0:09.88 3 142+ 26 144K+ 328K+ 344K+ 18M+
- 58 WindowServ 0.0% 4:00.86 4 197+ 683 5008K+ 11M+ 11M+ 235M+
- 50 coreservic 0.0% 0:11.18 2 136+ 155 864K+ 1368K+ 1320K+ 38M+
- 49 blued 0.0% 0:00.67 2 55+ 39 0 1304K+ 52K+ 29M+[/CODE]
- [/SPOILER]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement