Untitled

# An example configuration file for MPD

# See the mpd.conf man page for a more detailed description of each parameter.

 

 

# Files and directories #######################################################

#

# This setting controls the top directory which MPD will search to discover the

# available audio files and add them to the daemon's online database. This

# setting defaults to the XDG directory, otherwise the music directory will be

# be disabled and audio files will only be accepted over ipc socket (using

# file:// protocol) or streaming files over an accepted protocol.

#

music_directory         "/music"

#

# This setting sets the MPD internal playlist directory. The purpose of this

# directory is storage for playlists created by MPD. The server will use

# playlist files not created by the server but only if they are in the MPD

# format. This setting defaults to playlist saving being disabled.

#

playlist_directory              "/var/lib/mpd/playlists"

#

# This setting sets the location of the MPD database. This file is used to

# load the database at server start up and store the database while the

# server is not up. This setting defaults to disabled which will allow

# MPD to accept files over ipc socket (using file:// protocol) or streaming

# files over an accepted protocol.

#

db_file                 "/var/lib/mpd/tag_cache"

#

# These settings are the locations for the daemon log files for the daemon.

# These logs are great for troubleshooting, depending on your log_level

# settings.

#

# The special value "syslog" makes MPD use the local syslog daemon. This

# setting defaults to logging to syslog, otherwise logging is disabled.

#

log_file                        "/var/log/mpd/mpd.log"

#

# This setting sets the location of the file which stores the process ID

# for use of mpd --kill and some init scripts. This setting is disabled by

# default and the pid file will not be stored.

#

pid_file                        "/var/run/mpd/pid"

#

# This setting sets the location of the file which contains information about

# most variables to get MPD back into the same general shape it was in before

# it was brought down. This setting is disabled by default and the server

# state will be reset on server start up.

#

state_file                      "/var/lib/mpd/state"

#

# The location of the sticker database.  This is a database which

# manages dynamic information attached to songs.

#

sticker_file                   "/var/lib/mpd/sticker.sql"

#

###############################################################################

 

 

# General music daemon options ################################################

#

# This setting specifies the user that MPD will run as. MPD should never run as

# root and you may use this setting to make MPD change its user ID after

# initialization. This setting is disabled by default and MPD is run as the

# current user.

#

user                            "mpd"

#

# This setting specifies the group that MPD will run as. If not specified

# primary group of user specified with "user" setting will be used (if set).

# This is useful if MPD needs to be a member of group such as "audio" to

# have permission to use sound card.

#

group                          "audio"

#

# This setting sets the address for the daemon to listen on. Careful attention

# should be paid if this is assigned to anything other then the default, any.

# This setting can deny access to control of the daemon. Choose any if you want

# to have mpd listen on every address

#

# For network

bind_to_address         "localhost"

#

# And for Unix Socket

#bind_to_address                "/var/run/mpd/socket"

#

# This setting is the TCP port that is desired for the daemon to get assigned

# to.

#

#port                           "6600"

#

# This setting controls the type of information which is logged. Available

# setting arguments are "default", "secure" or "verbose". The "verbose" setting

# argument is recommended for troubleshooting, though can quickly stretch

# available resources on limited hardware storage.

#

#log_level                      "default"

#

# If you have a problem with your MP3s ending abruptly it is recommended that

# you set this argument to "no" to attempt to fix the problem. If this solves

# the problem, it is highly recommended to fix the MP3 files with vbrfix

# (available as vbrfix in the debian archive), at which

# point gapless MP3 playback can be enabled.

#

#gapless_mp3_playback                   "yes"

#

# This setting enables MPD to create playlists in a format usable by other

# music players.

#

#save_absolute_paths_in_playlists       "no"

#

# This setting defines a list of tag types that will be extracted during the

# audio file discovery process. Optionally, 'comment' can be added to this

# list.

#

#metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"

#

# This setting enables automatic update of MPD's database when files in

# music_directory are changed.

#

#auto_update    "yes"

#

# Limit the depth of the directories being watched, 0 means only watch

# the music directory itself.  There is no limit by default.

#

#auto_update_depth "3"

#

###############################################################################

 

 

# Symbolic link behavior ######################################################

#

# If this setting is set to "yes", MPD will discover audio files by following

# symbolic links outside of the configured music_directory.

#

#follow_outside_symlinks        "yes"

#

# If this setting is set to "yes", MPD will discover audio files by following

# symbolic links inside of the configured music_directory.

#

#follow_inside_symlinks         "yes"

#

###############################################################################

 

 

# Zeroconf / Avahi Service Discovery ##########################################

#

# If this setting is set to "yes", service information will be published with

# Zeroconf / Avahi.

#

#zeroconf_enabled               "yes"

#

# The argument to this setting will be the Zeroconf / Avahi unique name for

# this MPD server on the network.

#

#zeroconf_name                  "Music Player"

#

###############################################################################

 

 

# Permissions #################################################################

#

# If this setting is set, MPD will require password authorization. The password

# can setting can be specified multiple times for different password profiles.

#

#password                        "password@read,add,control,admin"

#

# This setting specifies the permissions a user has who has not yet logged in.

#

#default_permissions             "read,add,control,admin"

#

###############################################################################

 

 

# Input #######################################################################

#

 

input {

        plugin "curl"

#       proxy "proxy.isp.com:8080"

#       proxy_user "user"

#       proxy_password "password"

}

 

#

###############################################################################

 

# Audio Output ################################################################

#

# MPD supports various audio output types, as well as playing through multiple

# audio outputs at the same time, through multiple audio_output settings

# blocks. Setting this block is optional, though the server will only attempt

# autodetection for one sound card.

#

# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of

# other audio outputs.

#

# An example of an ALSA output:

#

#audio_output {

#       type            "alsa"

#       name            "My ALSA Device"

#       device          "hw:0,0"        # optional

#       format          "44100:16:2"    # optional

#       mixer_device    "default"       # optional

#       mixer_control   "PCM"           # optional

#       mixer_index     "0"             # optional

#}

#

# An example of an OSS output:

#

#audio_output {

#       type            "oss"

#       name            "My OSS Device"

#       device          "/dev/dsp"      # optional

#       format          "44100:16:2"    # optional

#       mixer_device    "/dev/mixer"    # optional

#       mixer_control   "PCM"           # optional

#}

#

# An example of a shout output (for streaming to Icecast):

#

#audio_output {

#       type            "shout"

#       encoding        "ogg"                   # optional

#       name            "My Shout Stream"

#       host            "localhost"

#       port            "8000"

#       mount           "/mpd.ogg"

#       password        "hackme"

#       quality         "5.0"

#       bitrate         "128"

#       format          "44100:16:1"

#       protocol        "icecast2"              # optional

#       user            "source"                # optional

#       description     "My Stream Description" # optional

#       genre           "jazz"                  # optional

#       public          "no"                    # optional

#       timeout         "2"                     # optional

#}

#

# An example of a recorder output:

#

#audio_output {

#       type            "recorder"

#       name            "My recorder"

#       encoder         "vorbis"                # optional, vorbis or lame

#       path            "/var/lib/mpd/recorder/mpd.ogg"

##      quality         "5.0"                   # do not define if bitrate is defined

#       bitrate         "128"                   # do not define if quality is defined

#       format          "44100:16:1"

#}

#

# An example of a httpd output (built-in HTTP streaming server):

#

#audio_output {

#       type            "httpd"

#       name            "My HTTP Stream"

#       encoder         "vorbis"                # optional, vorbis or lame

#       port            "8000"

#       quality         "5.0"                   # do not define if bitrate is defined

#       bitrate         "128"                   # do not define if quality is defined

#       format          "44100:16:1"

#}

#

# An example of a pulseaudio output (streaming to a remote pulseaudio server)

#

#audio_output {

#       type            "pulse"

#       name            "My Pulse Output"

#       server          "remote_server"         # optional

#       sink            "remote_server_sink"    # optional

#}

audio_output {

        type "pulse"

        name "Local MPD Output"

}

#

## Example "pipe" output:

#

#audio_output {

#       type            "pipe"

#       name            "my pipe"

#       command         "aplay -f cd 2>/dev/null"

## Or if you're want to use AudioCompress

#       command         "AudioCompress -m | aplay -f cd 2>/dev/null"

## Or to send raw PCM stream through PCM:

#       command         "nc example.org 8765"

#       format          "44100:16:2"

#}

#

## An example of a null output (for no audio output):

#

#audio_output {

#       type            "null"

#       name            "My Null Output"

#}

#

# This setting will change all decoded audio to be converted to the specified

# format before being passed to the audio outputs. By default, this setting is

# disabled.

#

#audio_output_format            "44100:16:2"

#

# If MPD has been compiled with libsamplerate support, this setting specifies

# the sample rate converter to use.  Possible values can be found in the

# mpd.conf man page or the libsamplerate documentation. By default, this is

# setting is disabled.

#

#samplerate_converter           "Fastest Sinc Interpolator"

#

###############################################################################

 

 

# Volume control mixer ########################################################

#

# These are the global volume control settings. By default, this setting will

# be detected to the available audio output device, with preference going to

# hardware mixing. Hardware and software mixers for individual audio_output

# sections cannot yet be mixed.

#

# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this

# setting is used other sound applications will be affected by the volume

# being controlled by MPD.

#

#mixer_type                     "hardware"

#

# An example for controlling all mixers through software. This will control

# all controls, even if the mixer is not supported by the device and will not

# affect any other sound producing applications.

#

#mixer_type                     "software"

#

# This example will not allow MPD to touch the mixer at all and will disable

# all volume controls.

#

#mixer_type                     "disabled"

#

###############################################################################

 

 

# Normalization automatic volume adjustments ##################################

#

# This setting specifies the type of ReplayGain to use. This setting can have

# the argument "album" or "track". See <http://www.replaygain.org> for more

# details. This setting is disabled by default.

#

#replaygain                     "album"

#

# This setting sets the pre-amp used for files that have ReplayGain tags. By

# default this setting is disabled.

#

#replaygain_preamp              "0"

#

# This setting enables on-the-fly normalization volume adjustment. This will

# result in the volume of all playing audio to be adjusted so the output has

# equal "loudness". This setting is disabled by default.

#

#volume_normalization           "no"

#

###############################################################################

 

 

# MPD Internal Buffering ######################################################

#

# This setting adjusts the size of internal decoded audio buffering. Changing

# this may have undesired effects. Don't change this if you don't know what you

# are doing.

#

#audio_buffer_size              "2048"

#

# This setting controls the percentage of the buffer which is filled before

# beginning to play. Increasing this reduces the chance of audio file skipping,

# at the cost of increased time prior to audio playback.

#

#buffer_before_play             "10%"

#

###############################################################################

 

 

# Resource Limitations ########################################################

#

# These settings are various limitations to prevent MPD from using too many

# resources. Generally, these settings should be minimized to prevent security

# risks, depending on the operating resources.

#

#connection_timeout             "60"

#max_connections                "10"

#max_playlist_length            "16384"

#max_command_list_size          "2048"

#max_output_buffer_size         "8192"

#

###############################################################################

 

 

# Character Encoding ##########################################################

#

# If file or directory names do not display correctly for your locale then you

# may need to modify this setting. After modification of this setting mpd

# --create-db must be run to change the database.

#

filesystem_charset              "UTF-8"

#

# This setting controls the encoding that ID3v1 tags should be converted from.

#

id3v1_encoding                  "UTF-8"

#

###############################################################################

# SIDPlay decoder #############################################################

#

# songlength_database:

#  Location of your songlengths file, as distributed with the HVSC.

#  The sidplay plugin checks this for matching MD5 fingerprints.

#  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq

#

# default_songlength:

#  This is the default playing time in seconds for songs not in the

#  songlength database, or in case you're not using a database.

#  A value of 0 means play indefinitely.

#

# filter:

#  Turns the SID filter emulation on or off.

#

#decoder {

#       plugin                  "sidplay"

#       songlength_database     "/media/C64Music/DOCUMENTS/Songlengths.txt"

#       default_songlength      "120"

#       filter "true"

#}

#

###############################################################################