API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 19th, 2017
352
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.56 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
  2. [ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  3. [ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  4. [ 0.000000] Zone ranges:
  5. [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
  6. [ 0.000000] Movable zone start for each node
  7. [ 0.000000] Early memory node ranges
  8. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
  9. [ 0.000000] node 0: [mem 0x0000000020000000-0x000000002fffffff]
  10. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
  11. [ 0.000000] On node 0 totalpages: 131072
  12. [ 0.000000] Normal zone: 1152 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  15. [ 0.000000] percpu: Embedded 13 pages/cpu @81487000 s21776 r8192 d23280 u53248
  16. [ 0.000000] pcpu-alloc: s21776 r8192 d23280 u53248 alloc=13*4096
  17. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  18. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
  19. [ 0.000000] Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=null
  20. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  21. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  23. [ 0.000000] Memory: 312336K/524288K available (7894K kernel code, 372K rwdata, 1516K rodata, 252K init, 154K bss, 211952K reserved, 0K cma-reserved)
  24. [ 0.000000] Hierarchical RCU implementation.
  25. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  26. [ 0.000000] NR_IRQS:160
  27. [ 0.000000] Measuring MIPS counter frequency...
  28. [ 0.000000] Detected MIPS clock frequency: 751 MHz (375.765 MHz counter)
  29. [ 0.000000] clocksource: wktmr: mask: 0xffffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
  30. [ 0.000000] sched_clock: 32 bits at 1kHz, resolution 1000000ns, wraps every 2147483647500000ns
  31. [ 0.000000] Console: colour dummy device 80x25
  32. [ 0.008000] Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
  33. [ 0.009000] pid_max: default: 32768 minimum: 301
  34. [ 0.009000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  35. [ 0.009000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  36. [ 0.011000] SMP: Booting CPU1...
  37. [ 0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
  38. [ 0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
  39. [ 0.015000] CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
  40. [ 0.015000] FPU revision is: 00130001
  41. [ 0.024000] SMP: CPU1 is running
  42. [ 0.024000] Brought up 2 CPUs
  43. [ 0.024000] devtmpfs: initialized
  44. [ 0.028000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  45. [ 0.028000] NET: Registered protocol family 16
  46. [ 0.043000] USB0: power enable is active low; overcurrent is active low
  47. [ 0.053000] SCSI subsystem initialized
  48. [ 0.053000] libata version 3.00 loaded.
  49. [ 0.054000] usbcore: registered new interface driver usbfs
  50. [ 0.054000] usbcore: registered new interface driver hub
  51. [ 0.054000] usbcore: registered new device driver usb
  52. [ 0.054000] Linux video capture interface: v2.00
  53. [ 0.054000] Advanced Linux Sound Architecture Driver Initialized.
  54. [ 0.054000] Bluetooth: Core ver 2.21
  55. [ 0.055000] NET: Registered protocol family 31
  56. [ 0.055000] Bluetooth: HCI device and connection manager initialized
  57. [ 0.055000] Bluetooth: HCI socket layer initialized
  58. [ 0.055000] Bluetooth: L2CAP socket layer initialized
  59. [ 0.055000] Bluetooth: SCO socket layer initialized
  60. [ 0.055000] clocksource: Switched to clocksource wktmr
  61. [ 0.056000] FS-Cache: Loaded
  62. [ 0.062000] random: fast init done
  63. [ 0.065000] NET: Registered protocol family 2
  64. [ 0.065000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  65. [ 0.066000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  66. [ 0.066000] TCP: Hash tables configured (established 4096 bind 4096)
  67. [ 0.066000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  68. [ 0.066000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  69. [ 0.066000] NET: Registered protocol family 1
  70. [ 0.067000] RPC: Registered named UNIX socket transport module.
  71. [ 0.067000] RPC: Registered udp transport module.
  72. [ 0.067000] RPC: Registered tcp transport module.
  73. [ 0.067000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  74. [ 0.068000] futex hash table entries: 512 (order: 3, 32768 bytes)
  75. [ 0.068000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  76. [ 0.069000] FS-Cache: Netfs 'nfs' registered for caching
  77. [ 0.069000] NFS: Registering the id_resolver key type
  78. [ 0.069000] Key type id_resolver registered
  79. [ 0.069000] Key type id_legacy registered
  80. [ 0.069000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  81. [ 0.069000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  82. [ 0.070000] FS-Cache: Netfs 'cifs' registered for caching
  83. [ 0.070000] Key type cifs.spnego registered
  84. [ 0.070000] fuse init (API version 7.25)
  85. [ 0.077000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  86. [ 0.077000] io scheduler noop registered
  87. [ 0.077000] io scheduler cfq registered (default)
  88. [ 0.077000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  89. [ 0.078000] serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
  90. [ 0.079000] serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
  91. [ 0.079000] serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
  92. [ 0.087000] loop: module loaded
  93. [ 0.088000] ahci ahci.0: SSS flag set, parallel bus scan disabled
  94. [ 0.098000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  95. [ 0.098000] ahci ahci.0: flags: ncq sntf stag clo slum part
  96. [ 0.103000] scsi host0: ahci
  97. [ 0.103000] scsi host1: ahci
  98. [ 0.103000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
  99. [ 0.103000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
  100. [ 0.104000] brcmstb_nand: NAND controller driver is loaded
  101. [ 0.104000] libphy: Fixed MDIO Bus: probed
  102. [ 0.104000] __clk_enable: network [1]
  103. [ 0.104000] __clk_enable: enet [1]
  104. [ 0.104000] bcm7552_pm_genet_enable 00
  105. [ 0.227000] bcmgenet: configuring instance #0 for internal PHY
  106. [ 0.251000] bcmgenet bcmgenet.0 eth0: link down
  107. [ 0.251000] __clk_disable: enet [0]
  108. [ 0.251000] bcm7552_pm_genet_disable 00
  109. [ 0.251000] __clk_disable: network [0]
  110. [ 0.251000] usbcore: registered new interface driver r8152
  111. [ 0.251000] hso: /mnt/storage/jenkinsWS/OpenSpa/openspa-7.2/builds/openspa/osnino/tmp/work-shared/osnino/kernel-source/drivers/net/usb/hso.c: Option Wireless
  112. [ 0.251000] usbcore: registered new interface driver hso
  113. [ 0.251000] usbcore: registered new interface driver asix
  114. [ 0.251000] usbcore: registered new interface driver cdc_ether
  115. [ 0.251000] usbcore: registered new interface driver net1080
  116. [ 0.251000] usbcore: registered new interface driver cdc_subset
  117. [ 0.251000] usbcore: registered new interface driver zaurus
  118. [ 0.251000] usbcore: registered new interface driver ipheth
  119. [ 0.251000] usbcore: registered new interface driver cdc_ncm
  120. [ 0.251000] usbcore: registered new interface driver lg-vl600
  121. [ 0.251000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  122. [ 0.251000] __clk_enable: usb [1]
  123. [ 0.251000] bcm7552_pm_usb_enable 00
  124. [ 0.251000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
  125. [ 0.251000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
  126. [ 0.262000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
  127. [ 0.270000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
  128. [ 0.270000] hub 1-0:1.0: USB hub found
  129. [ 0.270000] hub 1-0:1.0: 2 ports detected
  130. [ 0.271000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  131. [ 0.271000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
  132. [ 0.271000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
  133. [ 0.271000] ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
  134. [ 0.337000] hub 2-0:1.0: USB hub found
  135. [ 0.337000] hub 2-0:1.0: 2 ports detected
  136. [ 0.338000] usbcore: registered new interface driver cdc_acm
  137. [ 0.338000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  138. [ 0.338000] usbcore: registered new interface driver uas
  139. [ 0.338000] usbcore: registered new interface driver usb-storage
  140. [ 0.338000] mousedev: PS/2 mouse device common for all mice
  141. [ 0.339000] i2c /dev entries driver
  142. [ 0.339000] usbcore: registered new interface driver btusb
  143. [ 0.339000] sdhci: Secure Digital Host Controller Interface driver
  144. [ 0.339000] sdhci: Copyright(c) Pierre Ossman
  145. [ 0.339000] sdhci-pltfm: SDHCI platform and OF driver helper
  146. [ 0.339000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
  147. [ 0.340000] mmc0: Failed to set 64-bit DMA mask.
  148. [ 0.340000] mmc0: Failed to set 32-bit DMA mask.
  149. [ 0.340000] mmc0: No suitable DMA available - falling back to PIO
  150. [ 0.374000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
  151. [ 0.374000] hidraw: raw HID events driver (C) Jiri Kosina
  152. [ 0.374000] usbcore: registered new interface driver usbhid
  153. [ 0.374000] usbhid: USB HID core driver
  154. [ 0.375000] NET: Registered protocol family 17
  155. [ 0.375000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  156. [ 0.375000] Bluetooth: HIDP socket layer initialized
  157. [ 0.375000] Key type dns_resolver registered
  158. [ 0.375000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
  159. [ 0.378000] EBI CS0: setting up NAND flash (primary)
  160. [ 0.378000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
  161. [ 0.378000] nand: Micron MT29F4G08ABADAWP
  162. [ 0.378000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  163. [ 0.379000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
  164. [ 0.379000] nand: Micron MT29F4G08ABADAWP
  165. [ 0.379000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  166. [ 0.379000] nand: WARNING: brcmnand.0: the ECC used on your system is too weak compared to the one required by the NAND chip
  167. [ 0.379000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
  168. [ 0.379000]
  169. [ 0.379000] Bad block table found at page 262080, version 0x01
  170. [ 0.380000] Bad block table found at page 262016, version 0x01
  171. [ 0.381000] Creating 3 MTD partitions on "brcmnand.0":
  172. [ 0.381000] 0x000001000000-0x00001fc00000 : "rootfs"
  173. [ 0.385000] 0x000000000000-0x000020000000 : "entire_device"
  174. [ 0.389000] 0x000000400000-0x000000e00000 : "kernel"
  175. [ 0.392000] ubi0: default fastmap pool size: 195
  176. [ 0.392000] ubi0: default fastmap WL pool size: 97
  177. [ 0.392000] ubi0: attaching mtd0
  178. [ 0.404000] mmc0: new high speed SDIO card at address 0001
  179. [ 0.413000] ata1: SATA link down (SStatus 0 SControl 300)
  180. [ 0.717000] ata2: SATA link down (SStatus 0 SControl 300)
  181. [ 0.869000] random: crng init done
  182. [ 3.119000] ubi0: scanning is finished
  183. [ 3.134000] ubi0: attached mtd0 (name "rootfs", size 492 MiB)
  184. [ 3.134000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  185. [ 3.134000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  186. [ 3.134000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  187. [ 3.134000] ubi0: good PEBs: 3936, bad PEBs: 0, corrupted PEBs: 0
  188. [ 3.134000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  189. [ 3.134000] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 796154692
  190. [ 3.134000] ubi0: available PEBs: 0, total reserved PEBs: 3936, PEBs reserved for bad PEB handling: 80
  191. [ 3.134000] ubi0: background thread "ubi_bgt0d" started, PID 83
  192. [ 3.134000] ALSA device list:
  193. [ 3.134000] No soundcards found.
  194. [ 3.134000] Warning: unable to open an initial console.
  195. [ 3.136000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 84
  196. [ 3.210000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  197. [ 3.210000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  198. [ 3.210000] UBIFS (ubi0:0): FS size: 487460864 bytes (464 MiB, 3839 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
  199. [ 3.210000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  200. [ 3.210000] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 3BDCBED0-91E1-4569-86C5-075BD0B9861B, small LPT model
  201. [ 3.212000] VFS: Mounted root (ubifs filesystem) on device 0:12.
  202. [ 3.214000] devtmpfs: mounted
  203. [ 3.214000] Freeing unused kernel memory: 252K (80991000 - 809d0000)
  204. [ 3.214000] This architecture does not have kernel memory protection.
  205. [ 5.740000] linuxdvb: module_layout: kernel tainted.
  206. [ 5.740000] Disabling lock debugging due to kernel taint
  207. [ 5.740000] linuxdvb: loading out-of-tree module taints kernel.
  208. [ 5.740000] linuxdvb: module license 'Proprietary' taints kernel.
  209. [ 5.820000] *** Nexus was compiled with no error messages. For any failure, recompile with B_REFSW_DEBUG=y and retest.
  210. [ 5.939000] linuxdvb: boardid = 0
  211. [ 6.393000] input: dreambox advanced remote control (native) as /devices/virtual/misc/nexus/input0
  212. [ 6.402000] DVB: registering new adapter ("linuxdvb")
  213. [ 6.608000] misc nexus: DVB: registering adapter 0 frontend 0 (DVB-S2 (Internal))...
  214. [ 7.534000] misc nexus: DVB: registering adapter 0 frontend 1 (DVB-T2/C (Internal))...
  215. [ 7.537000] was_timer_wakeup = 0
  216. [ 7.537000] linuxdvb: nexus driver initialized
  217. [ 7.627000] Bluetooth: HCI UART driver ver 2.3
  218. [ 7.627000] Bluetooth: HCI UART protocol H4 registered
  219. [ 7.627000] Bluetooth: HCI UART protocol BCSP registered
  220. [ 7.627000] Bluetooth: HCI UART protocol LL registered
  221. [ 7.627000] Bluetooth: HCI UART protocol Three-wire (H5) registered
  222. [ 7.966000] RTL871X: module init start
  223. [ 7.966000] RTL871X: rtl8723bs v4.4.1_17245.20160325_BTCOEX20151223-654a
  224. [ 7.966000] RTL871X: build time: Nov 30 2017 20:07:09
  225. [ 7.966000] RTL871X: rtl8723bs BT-Coex version = BTCOEX20151223-654a
  226. [ 8.031000] RTL871X: hal_com_config_channel_plan chplan:0x20
  227. [ 8.035000] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=88:83:5d:52:0d:5e
  228. [ 8.038000] RTL871X: module init ret=0
  229. [ 8.452000] SGI XFS with security attributes, realtime, no debug enabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!