API tools faq
paste
Advertisement
Guest User

ebin official Armbian 17.10 / 4.4.89

a guest
Sep 28th, 2017
597
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.70 KB | None | 0 0
raw download clone embed print report
  1. TIM-1.0
  2. WTMI-armada-17.10.1-4809244
  3. ENTER init_ddrgen
  4. DDR_TOPOLOGY is 2 : DDR3, 2CS 512M + 512M
  5. WTMI_CLOCK=2
  6.  
  7. Fill memory before self refresh...done
  8.  
  9. Fill memory before self refresh...done
  10.  
  11. Now in Self-refresh Mode
  12. Restore CAS Read and Write Latency
  13. Restore termination values to original values
  14. Exited self-refresh ...
  15.  
  16. DLL TUNING
  17. ==============
  18. DLL 0xc0001050[21:16]: [0,28,14]
  19. DLL 0xc0001050[29:24]: [4,35,1c]
  20. DLL 0xc0001054[21:16]: [0,2c,16]
  21. DLL 0xc0001054[29:24]: [7,3c,21]
  22. DLL 0xc0001074[21:16]: [0,3f,1f]
  23. DLL 0xc0001074NOTICE: Booting Trusted Firmware
  24. NOTICE: BL1: v1.3(release):armada-17.10.2:13f2984
  25. NOTICE: BL1: Built : 12:48:22, Sep 27 2NOTICE: BL2: v1.3(release):armada-17.10.2:13f2984
  26. NOTICE: BL2: Built : 12:48:22, Sep 27 2017
  27. NNOTICE: BL31: v1.3(release):armada-17.10.2:13f2984
  28. NOTICE: BL31:
  29.  
  30. U-Boot 2017.03-armada-17.10.1-g440395a (Sep 25 2017 - 15:43:51 +0200)
  31.  
  32. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  33. CPU @ 1000 [MHz]
  34. L2 @ 800 [MHz]
  35. TClock @ 200 [MHz]
  36. DDR @ 800 [MHz]
  37. DRAM: 1 GiB
  38. U-Boot DT blob at : 000000003f7182d8
  39. Comphy-0: USB3 5 Gbps
  40. Comphy-1: PEX0 2.5 Gbps
  41. Comphy-2: SATA0 6 Gbps
  42. SATA link 0 timeout.
  43. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  44. flags: ncq led only pmp fbss pio slum part sxs
  45. PCIE-0: Link down
  46. MMC: sdhci@d0000: 0
  47. SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  48. Net: eth0: neta@30000 [PRIME]
  49. Hit any key to stop autoboot: 0
  50. switch to partitions #0, OK
  51. mmc0 is current device
  52. 14313472 bytes read in 622 ms (21.9 MiB/s)
  53. 5114631 bytes read in 226 ms (21.6 MiB/s)
  54. 11474 bytes read in 13 ms (861.3 KiB/s)
  55. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  56. Image Name: uInitrd
  57. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  58. Data Size: 5114567 Bytes = 4.9 MiB
  59. Load Address: 00000000
  60. Entry Point: 00000000
  61. Verifying Checksum ... OK
  62. ## Flattened Device Tree blob at 04f00000
  63. Booting using the fdt blob at 0x4f00000
  64. Loading Ramdisk to 3f236000, end 3f716ac7 ... OK
  65. Using Device Tree in place at 0000000004f00000, end 0000000004f05cd1
  66.  
  67. Starting kernel ...
  68.  
  69. [ 0.000000] Booting Linux on physical CPU 0x0
  70. [ 0.000000] Initializing cgroup subsys cpuset
  71. [ 0.000000] Initializing cgroup subsys cpu
  72. [ 0.000000] Initializing cgroup subsys cpuacct
  73. [ 0.000000] Linux version 4.4.89-mvebu64 (root@armbian) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #1 SMP PREEMPT Thu Sep 28 17:40:14 CEST 2017
  74. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  75. [ 0.000000] earlycon: Early serial console at MMIO 0xd0012000 (options '')
  76. [ 0.000000] bootconsole [uart0] enabled
  77. [ 0.000000] efi: Getting EFI parameters from FDT:
  78. [ 0.000000] efi: UEFI not found.
  79. [ 0.000000] cma: Reserved 16 MiB at 0x000000003e000000
  80. [ 0.000000] psci: probing for conduit method from DT.
  81. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  82. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  83. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  84. [ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03ffc5000 s25240 r8192 d32104 u65536
  85. [ 0.000000] Detected VIPT I-cache on CPU0
  86. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  87. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257536
  88. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p1 rw rootwait
  89. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  90. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  91. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  92. [ 0.000000] software IO TLB [mem 0x39600000-0x3d600000] (64MB) mapped at [ffffffc039600000-ffffffc03d5fffff]
  93. [ 0.000000] Memory: 926700K/1046528K available (9617K kernel code, 570K rwdata, 3312K rodata, 360K init, 288K bss, 103444K reserved, 16384K cma-reserved)
  94. [ 0.000000] Virtual kernel memory layout:
  95. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  96. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  97. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
  98. [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
  99. [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  100. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  101. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
  102. [ 0.000000] .init : 0xffffffc000d23000 - 0xffffffc000d7d000 ( 360 KB)
  103. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000d22474 ( 12938 KB)
  104. [ 0.000000] .data : 0xffffffc000d98000 - 0xffffffc000e26800 ( 570 KB)
  105. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  106. [ 0.000000] Preemptible hierarchical RCU implementation.
  107. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  108. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
  109. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
  110. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  111. [ 0.000000] GIC: Using split EOI/Deactivate mode
  112. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000d1d40000
  113. [ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
  114. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  115. [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  116. [ 0.008408] Console: colour dummy device 80x25
  117. [ 0.012917] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
  118. [ 0.023469] pid_max: default: 32768 minimum: 301
  119. [ 0.028268] Security Framework initialized
  120. [ 0.032460] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  121. [ 0.039335] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  122. [ 0.047200] Initializing cgroup subsys memory
  123. [ 0.051630] Initializing cgroup subsys devices
  124. [ 0.056179] Initializing cgroup subsys freezer
  125. [ 0.060747] Initializing cgroup subsys net_cls
  126. [ 0.065315] Initializing cgroup subsys net_prio
  127. [ 0.069975] Initializing cgroup subsys hugetlb
  128. [ 0.074543] Initializing cgroup subsys pids
  129. [ 0.079098] EFI services will not be available.
  130. [ 0.083704] ASID allocator initialised with 65536 entries
  131. [ 0.125387] Detected VIPT I-cache on CPU1
  132. [ 0.125414] CPU1: found redistributor 1 region 0:0x00000000d1d60000
  133. [ 0.125440] CPU1: Booted secondary processor [410fd034]
  134. [ 0.125497] Brought up 2 CPUs
  135. [ 0.144417] SMP: Total of 2 processors activated.
  136. [ 0.149261] CPU features: detected feature: GIC system register CPU interface
  137. [ 0.156609] CPU: All CPU(s) started at EL2
  138. [ 0.160829] alternatives: patching kernel code
  139. [ 0.165861] devtmpfs: initialized
  140. [ 0.171753] DMI not present or invalid.
  141. [ 0.175841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  142. [ 0.185826] futex hash table entries: 512 (order: 4, 65536 bytes)
  143. [ 0.192820] xor: measuring software checksum speed
  144. [ 0.237751] 8regs : 1919.000 MB/sec
  145. [ 0.282013] 8regs_prefetch: 1711.000 MB/sec
  146. [ 0.326630] 32regs : 2359.000 MB/sec
  147. [ 0.370887] 32regs_prefetch: 1984.000 MB/sec
  148. [ 0.375558] xor: using function: 32regs (2359.000 MB/sec)
  149. [ 0.381128] pinctrl core: initialized pinctrl subsystem
  150. [ 0.387658] NET: Registered protocol family 16
  151. [ 0.404238] cpuidle: using governor ladder
  152. [ 0.420412] cpuidle: using governor menu
  153. [ 0.424615] vdso: 2 pages (1 code @ ffffffc000d9d000, 1 data @ ffffffc000d9c000)
  154. [ 0.432193] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  155. [ 0.440931] DMA: preallocated 2048 KiB pool for atomic allocations
  156. [ 0.447348] Serial: AMBA PL011 UART driver
  157. [ 0.452851] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 7, base_baud = 0) is a mvebu-uart
  158. [ 0.461768] console [ttyMV0] enabled
  159. [ 0.461768] console [ttyMV0] enabled
  160. [ 0.469112] bootconsole [uart0] disabled
  161. [ 0.469112] bootconsole [uart0] disabled
  162. [ 0.576721] raid6: int64x1 gen() 399 MB/s
  163. [ 0.649127] raid6: int64x1 xor() 397 MB/s
  164. [ 0.721381] raid6: int64x2 gen() 594 MB/s
  165. [ 0.793638] raid6: int64x2 xor() 513 MB/s
  166. [ 0.865911] raid6: int64x4 gen() 864 MB/s
  167. [ 0.938230] raid6: int64x4 xor() 632 MB/s
  168. [ 1.010482] raid6: int64x8 gen() 1000 MB/s
  169. [ 1.082763] raid6: int64x8 xor() 626 MB/s
  170. [ 1.154940] raid6: neonx1 gen() 631 MB/s
  171. [ 1.227183] raid6: neonx1 xor() 651 MB/s
  172. [ 1.299449] raid6: neonx2 gen() 1034 MB/s
  173. [ 1.371613] raid6: neonx2 xor() 890 MB/s
  174. [ 1.443946] raid6: neonx4 gen() 1331 MB/s
  175. [ 1.516178] raid6: neonx4 xor() 1005 MB/s
  176. [ 1.588405] raid6: neonx8 gen() 1413 MB/s
  177. [ 1.660559] raid6: neonx8 xor() 1044 MB/s
  178. [ 1.664799] raid6: using algorithm neonx8 gen() 1413 MB/s
  179. [ 1.670102] raid6: .... xor() 1044 MB/s, rmw enabled
  180. [ 1.675674] raid6: using intx1 recovery algorithm
  181. [ 1.680823] ACPI: Interpreter disabled.
  182. [ 1.684850] gpio-regulator soc:internal-regs:regulator@0: Could not obtain regulator setting GPIOs: -517
  183. [ 1.694349] armada3700-avs d0011500.avs: error getting max cpu frequency, try again later
  184. [ 1.702949] armada3700-avs d0011500.avs: armada_3700_avs_probe: failed initialization
  185. [ 1.711368] vgaarb: loaded
  186. [ 1.714151] SCSI subsystem initialized
  187. [ 1.718174] usbcore: registered new interface driver usbfs
  188. [ 1.723688] usbcore: registered new interface driver hub
  189. [ 1.729057] usbcore: registered new device driver usb
  190. [ 1.734767] pps_core: LinuxPPS API ver. 1 registered
  191. [ 1.739749] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  192. [ 1.749436] PTP clock support registered
  193. [ 1.753404] dmi: Firmware registration failed.
  194. [ 1.757887] armada37xx-clk-pm d0014018.cpu-pm-clk: error getting max cpu frequency, try again later
  195. [ 1.767647] NetLabel: Initializing
  196. [ 1.770810] NetLabel: domain hash size = 128
  197. [ 1.775238] NetLabel: protocols = UNLABELED CIPSOv4
  198. [ 1.780745] NetLabel: unlabeled traffic allowed by default
  199. [ 1.786678] clocksource: Switched to clocksource arch_sys_counter
  200. [ 1.793054] pnp: PnP ACPI: disabled
  201. [ 1.803909] NET: Registered protocol family 2
  202. [ 1.808932] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  203. [ 1.816075] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  204. [ 1.822962] TCP: Hash tables configured (established 8192 bind 8192)
  205. [ 1.829602] UDP hash table entries: 512 (order: 2, 16384 bytes)
  206. [ 1.835724] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  207. [ 1.842372] NET: Registered protocol family 1
  208. [ 1.847204] RPC: Registered named UNIX socket transport module.
  209. [ 1.853284] RPC: Registered udp transport module.
  210. [ 1.857847] RPC: Registered tcp transport module.
  211. [ 1.862706] RPC: Registered tcp NFSv4.1 backchannel transport module.
  212. [ 1.869858] Trying to unpack rootfs image as initramfs...
  213. [ 2.124943] Freeing initrd memory: 4992K
  214. [ 2.129571] kvm [1]: GICv3: no GICV resource entry
  215. [ 2.134299] kvm [1]: disabling GICv2 emulation
  216. [ 2.139050] kvm [1]: interrupt-controller@ffffffc0000aba64 IRQ13
  217. [ 2.145340] kvm [1]: timer IRQ3
  218. [ 2.148357] kvm [1]: Hyp mode initialized successfully
  219. [ 2.155939] audit: initializing netlink subsys (disabled)
  220. [ 2.161440] audit: type=2000 audit(2.084:1): initialized
  221. [ 2.167193] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  222. [ 2.181760] VFS: Disk quotas dquot_6.6.0
  223. [ 2.185673] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  224. [ 2.195735] NFS: Registering the id_resolver key type
  225. [ 2.200677] Key type id_resolver registered
  226. [ 2.204949] Key type id_legacy registered
  227. [ 2.209298] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  228. [ 2.216064] jffs2: version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
  229. [ 2.223001] fuse init (API version 7.23)
  230. [ 2.227549] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  231. [ 2.239000] async_tx: api initialized (async)
  232. [ 2.243823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  233. [ 2.251072] io scheduler noop registered
  234. [ 2.255100] io scheduler deadline registered
  235. [ 2.259553] io scheduler cfq registered (default)
  236. [ 2.267925] libphy: Fixed MDIO Bus: probed
  237. [ 2.271824] tun: Universal TUN/TAP device driver, 1.6
  238. [ 2.276981] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  239. [ 2.283610] libphy: mdio_driver_register: mv88e6xxx
  240. [ 2.289017] libphy: orion_mdio_bus: probed
  241. [ 2.293136] mdio_bus d0032004.mdio-mi:01: mdio_device_register
  242. [ 2.303780] sky2: driver version 1.30
  243. [ 2.307824] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  244. [ 2.313796] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  245. [ 2.319972] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  246. [ 2.327040] igb: Copyright (c) 2007-2014 Intel Corporation.
  247. [ 2.332842] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
  248. [ 2.341058] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  249. [ 2.346892] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
  250. [ 2.354697] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
  251. [ 2.360779] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
  252. [ 2.370518] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
  253. [ 2.376954] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  254. [ 2.384198] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  255. [ 2.391272] advk-pcie d0070000.pcie: Failed to obtain clock from DT
  256. [ 2.402332] mv_xor d0060900.xor: Marvell shared XOR driver
  257. [ 2.427242] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  258. [ 2.455261] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  259. [ 2.467484] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  260. [ 2.476110] Unable to detect cache hierarchy from DT for CPU 0
  261. [ 2.482853] brd: module loaded
  262. [ 2.490902] loop: module loaded
  263. [ 2.494428] SCSI Media Changer driver v0.25
  264. [ 2.504447] VFIO - User Level meta-driver version: 0.3
  265. [ 2.517917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  266. [ 2.524472] ehci-pci: EHCI PCI platform driver
  267. [ 2.529189] ehci-platform: EHCI generic platform driver
  268. [ 2.534878] ehci-orion: EHCI orion driver
  269. [ 2.548976] orion-ehci d005e000.usb: EHCI Host Controller
  270. [ 2.554503] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  271. [ 2.562309] orion-ehci d005e000.usb: irq 10, io mem 0xd005e000
  272. [ 2.578694] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  273. [ 2.585512] hub 1-0:1.0: USB hub found
  274. [ 2.589433] hub 1-0:1.0: 1 port detected
  275. [ 2.593745] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  276. [ 2.600182] ohci-pci: OHCI PCI platform driver
  277. [ 2.604701] ohci-platform: OHCI generic platform driver
  278. [ 2.610410] usbcore: registered new interface driver uas
  279. [ 2.616027] usbcore: registered new interface driver usb-storage
  280. [ 2.622040] usbcore: registered new interface driver ums-alauda
  281. [ 2.628436] usbcore: registered new interface driver ums-cypress
  282. [ 2.634451] usbcore: registered new interface driver ums-datafab
  283. [ 2.640835] usbcore: registered new interface driver ums_eneub6250
  284. [ 2.647316] usbcore: registered new interface driver ums-freecom
  285. [ 2.653413] usbcore: registered new interface driver ums-isd200
  286. [ 2.659714] usbcore: registered new interface driver ums-jumpshot
  287. [ 2.665898] usbcore: registered new interface driver ums-karma
  288. [ 2.671932] usbcore: registered new interface driver ums-onetouch
  289. [ 2.678252] usbcore: registered new interface driver ums-realtek
  290. [ 2.684272] usbcore: registered new interface driver ums-sddr09
  291. [ 2.690571] usbcore: registered new interface driver ums-sddr55
  292. [ 2.697232] usbcore: registered new interface driver ums-usbat
  293. [ 2.704363] mousedev: PS/2 mouse device common for all mice
  294. [ 2.714403] i2c /dev entries driver
  295. [ 2.718489] md: linear personality registered for level -1
  296. [ 2.724115] md: raid0 personality registered for level 0
  297. [ 2.729693] md: raid1 personality registered for level 1
  298. [ 2.734850] md: raid10 personality registered for level 10
  299. [ 2.740892] md: raid6 personality registered for level 6
  300. [ 2.746407] md: raid5 personality registered for level 5
  301. [ 2.751823] md: raid4 personality registered for level 4
  302. [ 2.757635] sdhci: Secure Digital Host Controller Interface driver
  303. [ 2.763958] sdhci: Copyright(c) Pierre Ossman
  304. [ 2.768106] sdhci-pltfm: SDHCI platform and OF driver helper
  305. [ 2.774404] xenon-sdhci d00d0000.sdhci: Failed to setup input clk: -517
  306. [ 2.781216] ledtrig-cpu: registered to indicate activity on CPUs
  307. [ 2.787400] hidraw: raw HID events driver (C) Jiri Kosina
  308. [ 2.795498] NET: Registered protocol family 10
  309. [ 2.800826] NET: Registered protocol family 17
  310. [ 2.805532] Distributed Switch Architecture driver version 0.1
  311. [ 2.811666] Key type dns_resolver registered
  312. [ 2.816957] registered taskstats version 1
  313. [ 2.823446] Btrfs loaded
  314. [ 2.838288] Key type encrypted registered
  315. [ 2.847848] mvneta d0030000.ethernet eth0: Using device tree mac address 00:51:82:11:22:00
  316. [ 3.056487] PCI host bridge /soc/pcie@d0070000 ranges:
  317. [ 3.061573] MEM 0xe8000000..0xe8ffffff -> 0xe8000000
  318. [ 3.066870] IO 0xe9000000..0xe900ffff -> 0xe9000000
  319. [ 4.072313] advk-pcie d0070000.pcie: link never came up
  320. [ 4.077480] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
  321. [ 4.084223] pci_bus 0000:00: root bus resource [bus 00-ff]
  322. [ 4.089647] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
  323. [ 4.096665] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
  324. [ 5.538210] advk-pcie d0070000.pcie: Posted PIO Response Status: CA, 0xe00 @ 0x0
  325. [ 5.548546] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  326. [ 5.557664] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
  327. [ 5.566982] scsi host0: ahci-mvebu
  328. [ 5.570798] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e0177] port 0x100 irq 12
  329. [ 5.589284] xhci-hcd d0058000.usb3: xHCI Host Controller
  330. [ 5.594720] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 2
  331. [ 5.602749] xhci-hcd d0058000.usb3: hcc params 0x0a000998 hci version 0x100 quirks 0x00010090
  332. [ 5.611447] xhci-hcd d0058000.usb3: irq 9, io mem 0xd0058000
  333. [ 5.617818] hub 2-0:1.0: USB hub found
  334. [ 5.621377] hub 2-0:1.0: 1 port detected
  335. [ 5.626629] xhci-hcd d0058000.usb3: xHCI Host Controller
  336. [ 5.631879] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 3
  337. [ 5.639755] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  338. [ 5.648391] hub 3-0:1.0: USB hub found
  339. [ 5.652223] hub 3-0:1.0: 1 port detected
  340. [ 5.656951] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  341. [ 5.662262] xenon-sdhci d00d0000.sdhci: No vmmc regulator found
  342. [ 5.702814] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  343. [ 5.738174] libphy: mv88e6xxx SMI: probed
  344. [ 5.742198] mdio_bus d0032004.mdio-mi: switch 0x341 probed: Marvell 88E6341, revision 0
  345. [ 5.750372] mvneta d0030000.ethernet eth0: [0]: detected a Marvell 88E6341 switch
  346. [ 5.773673] mmc0: new high speed SDHC card at address aaaa
  347. [ 5.779667] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  348. [ 5.788866] mmcblk0: p1
  349. [ 5.835484] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1)
  350. [ 5.849827] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1)
  351. [ 5.864210] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1)
  352. [ 5.879112] hctosys: unable to open rtc device (rtc0)
  353. [ 5.902810] ata1: SATA link down (SStatus 0 SControl 300)
  354. [ 5.909546] Freeing unused kernel memory: 360K
  355. [ 5.914346] Freeing alternatives memory: 76K
  356. Loading, please wait...
  357. starting version 229
  358. [ 6.097402] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  359. [ 6.109351] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  360. [ 6.111071] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  361. [ 6.111686] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  362. [ 6.111860] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  363. [ 6.112167] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  364. [ 6.113269] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  365. [ 6.113574] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  366. [ 6.115437] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  367. [ 6.117290] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  368. Begin: Loading essential drivers ... done.
  369. Begin: Running /scripts/init-premount ... done.
  370. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  371. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  372. done.
  373. Begin: Will now check root file system ... fsck from util-linux 2.27.1
  374. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  375. /dev/mmcblk0p1: clean, 46756/959104 files, 627828/3850384 blocks
  376. done.
  377. [ 7.871945] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  378. done.
  379. Begin: Running /scripts/local-bottom ... done.
  380. Begin: Running /scripts/init-bottom ... done.
  381. [ 8.515704] systemd[1]: System time before build time, advancing clock.
  382. [ 8.577388] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  383. [ 8.597611] systemd[1]: Detected architecture arm64.
  384.  
  385. Welcome to Ubuntu 16.04.3 LTS!
  386.  
  387. [ 8.631525] systemd[1]: Set hostname to <ebin>.
  388. [ 9.405348] systemd[1]: Listening on fsck to fsckd communication Socket.
  389. [ OK ] Listening on fsck to fsckd communication Socket.
  390. [ 9.423761] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  391. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  392. [ 9.448022] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  393. [ OK ] Started Trigger resolvconf update for networkd DNS.
  394. [ 9.467220] systemd[1]: Reached target Encrypted Volumes.
  395. [ OK ] Reached target Encrypted Volumes.
  396. [ 9.484244] systemd[1]: Listening on Journal Audit Socket.
  397. [ OK ] Listening on Journal Audit Socket.
  398. [ 9.500643] systemd[1]: Created slice User and Session Slice.
  399. [ OK ] Created slice User and Session Slice.
  400. [ 9.516146] systemd[1]: Listening on Network Service Netlink Socket.
  401. [ OK ] Listening on Network Service Netlink Socket.
  402. [ 9.532550] systemd[1]: Created slice System Slice.
  403. [ OK ] Created slice System Slice.
  404. [ 9.548810] systemd[1]: Created slice system-serial\x2dgetty.slice.
  405. [ OK ] Created slice system-serial\x2dgetty.slice.
  406. [ 9.567954] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  407. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  408. [ 9.587979] systemd[1]: Listening on Journal Socket.
  409. [ OK ] Listening on Journal Socket.
  410. [ 9.628288] systemd[1]: Starting Restore / save the current clock...
  411. Starting Restore / save the current clock...
  412. [ 9.652810] systemd[1]: Starting Nameserver information manager...
  413. Starting Nameserver information manager...
  414. [ 9.712680] systemd[1]: Starting Load Kernel Modules...
  415. Starting Load Kernel Modules...
  416. [ 9.755399] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  417. Starting Create list of required st... nodes for the current kernel...
  418. [ 9.792049] systemd[1]: Listening on udev Kernel Socket.
  419. [ OK ] Listening on udev Kernel Socket.
  420. [ 9.836753] systemd[1]: Starting Remount Root and Kernel File Systems...
  421. Starting Remount Root and Kernel File Systems...
  422. [ 9.859771] systemd[1]: Reached target Slices.
  423. [ OK ] Reached target Slices.
  424. [ 9.895732] systemd[1]: Mounting Huge Pages File System...
  425. [ 9.909334] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  426. Mounting Huge Pages File System...
  427. [ 9.956805] systemd[1]: Starting Set console keymap...
  428. Starting Set console keymap...
  429. [ 9.972017] systemd[1]: Listening on Syslog Socket.
  430. [ OK ] Listening on Syslog Socket.
  431. [ 9.992707] systemd[1]: Listening on Journal Socket (/dev/log).
  432. [ OK ] Listening on Journal Socket (/dev/log).
  433. [ 10.011539] systemd[1]: Reached target Remote File Systems (Pre).
  434. [ OK ] Reached target Remote File Systems (Pre).
  435. [ 10.031532] systemd[1]: Reached target Remote File Systems.
  436. [ OK ] Reached target Remote File Systems.
  437. [ 10.048081] systemd[1]: Listening on udev Control Socket.
  438. [ OK ] Listening on udev Control Socket.
  439. [ 10.083755] systemd[1]: Mounting Debug File System...
  440. Mounting Debug File System...
  441. [ 10.107921] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  442. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  443. [ 10.139360] systemd[1]: Reached target Paths.
  444. [ OK ] Reached target Paths.
  445. [ 10.179591] systemd[1]: Mounting POSIX Message Queue File System...
  446. Mounting POSIX Message Queue File System...
  447. [ 10.244410] systemd[1]: Mounted Debug File System.
  448. [ OK ] Mounted Debug File System.
  449. [ 10.267566] systemd[1]: Mounted Huge Pages File System.
  450. [ OK ] Mounted Huge Pages File System.
  451. [ 10.283526] systemd[1]: Mounted POSIX Message Queue File System.
  452. [ OK ] Mounted POSIX Message Queue File System.
  453. [ 10.310237] systemd[1]: Started Restore / save the current clock.
  454. [ OK ] Started Restore / save the current clock.
  455. [ 10.365798] systemd[1]: Started Load Kernel Modules.
  456. [ OK ] Started Load Kernel Modules.
  457. [ 10.403158] systemd[1]: Started Create list of required static device nodes for the current kernel.
  458. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  459. [ 10.430556] systemd[1]: Started Remount Root and Kernel File Systems.
  460. [ OK ] Started Remount Root and Kernel File Systems.
  461. [ 10.473101] systemd[1]: Started Nameserver information manager.
  462. [ OK ] Started Nameserver information manager.
  463. [ 10.518516] systemd[1]: Time has been changed
  464. [ 10.730540] systemd[1]: Started Set console keymap.
  465. [ OK ] Started Set console keymap.
  466. [ 11.481729] systemd[1]: Reached target Network (Pre).
  467. [ OK ] Reached target Network (Pre).
  468. [ 11.512441] systemd[1]: Starting Load/Save Random Seed...
  469. Starting Load/Save Random Seed...
  470. [ 11.533424] systemd[1]: Activating swap /var/swap...
  471. Activating swap /var/swap...
  472. [ 11.568027] systemd[1]: Starting udev Coldplug all Devices...
  473. Starting udev Coldplug all Devices...
  474. [ 11.600386] systemd[1]: Starting Create Static Device Nodes in /dev...
  475. Starting Create Static Device Nodes in /dev...
  476. [ 11.663593] systemd[1]: Mounting FUSE Control File System...
  477. Mounting FUSE Control File System...
  478. [ 11.739895] systemd[1]: Mounting Configuration File System...
  479. Mounting Configuration File System...
  480. [ 11.856307] systemd[1]: Starting Apply Kernel Variables...
  481. Starting Apply Kernel Variables...
  482. [ OK ] Mounted Configuration File System.
  483. [ OK ] Mounted FUSE Control File System.
  484. [ OK ] Started Load/Save Random Seed.
  485. [ OK ] Started Create Static Device Nodes in /dev.
  486. [ OK ] Started Apply Kernel Variables.
  487. [ OK ] Activated swap /var/swap.
  488. [ OK ] Started udev Coldplug all Devices.
  489. [ OK ] Reached target Swap.
  490. [ OK ] Reached target Local File Systems (Pre).
  491. Mounting /tmp...
  492. Starting udev Kernel Device Manager...
  493. [ OK ] Mounted /tmp.
  494. [ OK ] Reached target Local File Systems.
  495. Starting Armbian enhanced Log2Ram...
  496. Starting Raise network interfaces...
  497. Starting Set console font and keymap...
  498. Starting LSB: Restore and store ALSA driver settings...
  499. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  500. [ OK ] Started udev Kernel Device Manager.
  501. [ OK ] Started LSB: Restore and store ALSA driver settings.
  502. Starting Network Service...
  503. [ OK ] Started Armbian enhanced Log2Ram.
  504. Starting Journal Service...
  505. [ OK ] Started Network Service.
  506. Starting Update resolvconf for networkd DNS...
  507. [ OK ] Started Journal Service.
  508. Starting Flush Journal to Persistent Storage...
  509. [ OK ] Started Flush Journal to Persistent Storage.
  510. Starting Create Volatile Files and Directories...
  511. [ OK ] Found device /dev/ttyS0.
  512. [ OK ] Started Create Volatile Files and Directories.
  513. [ OK ] Reached target System Time Synchronized.
  514. Starting Update UTMP about System Boot/Shutdown...
  515. [ OK ] Started Update UTMP about System Boot/Shutdown.
  516. [ OK ] Reached target System Initialization.
  517. [ OK ] Started Daily Cleanup of Temporary Directories.
  518. [ OK ] Listening on D-Bus System Message Bus Socket.
  519. [ OK ] Reached target Sockets.
  520. [ OK ] Reached target Basic System.
  521. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  522. Starting LSB: Start/stop sysstat's sadc...
  523. Starting System Logging Service...
  524. Starting Login Service...
  525. [ OK ] Started Regular background program processing daemon.
  526. [ OK ] Started D-Bus System Message Bus.
  527. Starting Network Manager...
  528. Starting LSB: Armbian gathering hardware information...
  529. Starting Permit User Sessions...
  530. [ OK ] Started System Logging Service.
  531. [ OK ] Started Permit User Sessions.
  532. [ OK ] Found device /dev/ttyMV0.
  533. [ OK ] Started Set console font and keymap.
  534. [ OK ] Started Raise network interfaces.
  535. [ OK ] Started LSB: Start/stop sysstat's sadc.
  536. [ OK ] Started Network Manager.
  537. [ OK ] Started Login Service.
  538. Starting Network Manager Script Dispatcher Service...
  539. Starting Network Manager Wait Online...
  540. [ OK ] Reached target Network.
  541. [ OK ] Started Unattended Upgrades Shutdown.
  542. Starting Network Name Resolution...
  543. Starting OpenBSD Secure Shell server...
  544. [ OK ] Created slice system-getty.slice.
  545. Starting Set console scheme...
  546. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  547. [ OK ] Started Set console scheme.
  548. [ OK ] Started Network Name Resolution.
  549. [ OK ] Started Network Manager Script Dispatcher Service.
  550. [ OK ] Started OpenBSD Secure Shell server.
  551. Starting Hostname Service...
  552. Starting LSB: set CPUFreq kernel parameters...
  553. [ OK ] Started Hostname Service.
  554. [ OK ] Started LSB: set CPUFreq kernel parameters.
  555. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  556. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  557. Starting Authenticate and Authorize Users to Run Privileged Tasks...
  558. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks.
  559. [ OK ] Started Network Manager Wait Online.
  560. [ OK ] Started Update resolvconf for networkd DNS.
  561. [ OK ] Reached target Network is Online.
  562. Starting LSB: Start NTP daemon...
  563. Starting /etc/rc.local Compatibility...
  564. [ OK ] Started Daily apt download activities.
  565. [ OK ] Started Daily apt upgrade and clean activities.
  566. [ OK ] Reached target Timers.
  567. Starting LSB: Advanced IEEE 802.11 management daemon...
  568. Starting LSB: disk temperature monitoring daemon...
  569. [ OK ] Started /etc/rc.local Compatibility.
  570. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  571. [ OK ] Started Serial Getty on ttyMV0.
  572. [ OK ] Started Getty on tty1.
  573. [ OK ] Started Serial Getty on ttyS0.
  574. [ OK ] Reached target Login Prompts.
  575. [ OK ] Started LSB: disk temperature monitoring daemon.
  576. [ OK ] Started LSB: Start NTP daemon.
  577. [ OK ] Started LSB: Armbian gathering hardware information.
  578. [ OK ] Reached target Multi-User System.
  579. [ OK ] Reached target Graphical Interface.
  580. Starting Update UTMP about System Runlevel Changes...
  581. [ OK ] Started Update UTMP about System Runlevel Changes.
  582.  
  583. Ubuntu 16.04.3 LTS ebin ttyMV0
  584.  
  585. ebin login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!