Changing monitoring state from 'Offline' to 'Detecting serial port'
Serial port list: ['/dev/ttyUSB0']
Connecting to: /dev/ttyUSB0
Changing monitoring state from 'Detecting serial port' to 'Opening serial port'
Connected to: Serial<id=0xa7479f70, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=30.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Changing monitoring state from 'Connecting' to 'Offline'
Connection closed, closing down monitor
Changing monitoring state from 'Offline' to 'Detecting serial port'
Serial port list: ['/dev/ttyUSB1']
Connecting to: /dev/ttyUSB1
Changing monitoring state from 'Detecting serial port' to 'Opening serial port'
Connected to: Serial<id=0xa7479d30, open=True>(port='/dev/ttyUSB1', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=30.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Recv: start
Send: N0 M110 N0*125
Recv: echo:Marlin TORNADO
Recv:
Recv: echo: Last Updated: 2017-08-28 12:00 | Author: (Phantom, TEVO TORNADO)
Recv: echo:Compiled: Dec  3 2017
Recv: echo: Free Memory: 3553  PlannerBufferBytes: 1232
Recv: echo:V40 stored settings retrieved (498 bytes; crc 56881)
Recv: echo:  G21    ; Units in mm
Recv: echo:  M149 C ; Units in Celsius
Recv:
Recv: echo:Filament settings: Disabled
Recv: echo:  M200 D3.00
Recv: echo:  M200 D0
Recv: echo:Steps per unit:
Recv: echo:  M92 X79.76 Y79.76 Z399.29 E400.00
Recv: echo:Maximum feedrates (units/s):
Recv: echo:  M203 X250.00 Y250.00 Z30.00 E55.00
Recv: echo:Maximum Acceleration (units/s2):
Recv: echo:  M201 X2000 Y2000 Z120 E10000
Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
Recv: echo:  M204 P1000.00 R10000.00 T1500.00
Recv: echo:Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_ms> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk>
Recv: echo:  M205 S0.00 T0.00 B20000 X10.00 Y10.00 Z0.40 E5.00
Recv: echo:Home offset:
Recv: echo:  M206 X0.00 Y0.00 Z0.00
Recv: echo:Material heatup parameters:
Recv: echo:  M145 S0 H190 B60 F0
Recv:   M145 S1 H240 B110 F0
Recv: echo:PID settings:
Recv: echo:  M301 P20.37 I1.50 D69.26
Recv: echo:  M304 P128.82 I16.91 D245.36
Recv: ok
Changing monitoring state from 'Connecting' to 'Operational'
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin TORNADO (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:TEVO Tornado EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
Recv: Cap:EEPROM:1
Recv: Cap:AUTOREPORT_TEMP:1
Recv: Cap:PROGRESS:0
Recv: Cap:PRINT_JOB:1
Recv: Cap:AUTOLEVEL:0
Recv: Cap:Z_PROBE:0
Recv: Cap:LEVELING_DATA:0
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: ok
Send: M21
Recv: echo:SD init fail
Recv: ok
Send: M117 IP 192.168.2.107
Recv: ok
Send: M115
Recv: FIRMWARE_NAME:Marlin TORNADO (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:TEVO Tornado EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
Recv: Cap:EEPROM:1
Recv: Cap:AUTOREPORT_TEMP:1
Recv: Cap:PROGRESS:0
Recv: Cap:PRINT_JOB:1
Recv: Cap:AUTOLEVEL:0
Recv: Cap:Z_PROBE:0
Recv: Cap:LEVELING_DATA:0
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: ok
Send: M155 S2
Recv: ok
Send: M155 S2
Recv: ok
Changing monitoring state from 'Operational' to 'Printing'
Send: N0 M110 N0*125
Recv: ok
Send: N1 G28*18
Recv:  T:83.23 /0.00 B:52.17 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv:  T:82.45 /0.00 B:52.06 /0.00 @:0 B@:0
Recv: X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
Recv: ok
Send: N2 G1 Z5 F3000*0
Recv: ok
Send: N3 G92 E0*68
Recv: X:0.00 Y:0.00 Z:5.00 E:0.00 Count X:0 Y:0 Z:42
Recv: ok
Send: N4 M109 S190*100
Recv:  T:82.14 /190.00 B:52.16 /0.00 @:0 B@:0 W:?
Send: N5 M117 0.00p  complete*102
Send: N6 M117 ETL No ETL yet*107
Send: N7 M117 ETA No ETA yet*106
Send: N8 M117 0.00p  complete*107
Send: N9 M117 ETL No ETL yet*100
Send: N10 M117 ETA No ETA yet*92
Send: N11 M117 0.00p  complete*83
Send: N12 M117 ETL No ETL yet*94
Send: N13 M117 ETA No ETA yet*95
Send: N14 M117 0.00p  complete*86
Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N15 M105*19
Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N16 M105*16
Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N17 M105*17
Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N18 M105*30
No response from printer after 6 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Changing monitoring state from 'Printing' to 'Offline: Too many consecutive timeouts, printer still connected and alive?'
Connection closed, closing down monitor