Ledger Nano X - The secure hardware wallet
SHARE
TWEET

dmesg

milasch Oct 16th, 2014 292 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.4.75+ (benn@benn-zh) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 SMP PREEMPT Mon Dec 30 17:02:17 CST 2013
  5. [    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [    0.000000] Machine: sun7i
  8. [    0.000000] Memory Reserved:
  9. [    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
  10. [    0.000000]  G2D  : 0x50000000 - 0x50ffffff  (  16 MB)
  11. [    0.000000]  LCD  : 0x51000000 - 0x52ffffff  (  32 MB)
  12. [    0.000000] cma: CMA: reserved 192 MiB at 43c00000
  13. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  14. [    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  15. [    0.000000] On node 0 totalpages: 524288
  16. [    0.000000] free_area_init_node: node 0, pgdat c0903380, node_mem_map d3000000
  17. [    0.000000]   DMA zone: 512 pages used for memmap
  18. [    0.000000]   DMA zone: 0 pages reserved
  19. [    0.000000]   DMA zone: 65024 pages, LIFO batch:15
  20. [    0.000000]   Normal zone: 1008 pages used for memmap
  21. [    0.000000]   Normal zone: 128016 pages, LIFO batch:31
  22. [    0.000000]   HighMem zone: 2576 pages used for memmap
  23. [    0.000000]   HighMem zone: 327152 pages, LIFO batch:31
  24. [    0.000000] PERCPU: Embedded 7 pages/cpu @d400e000 s7680 r8192 d12800 u32768
  25. [    0.000000] pcpu-alloc: s7680 r8192 d12800 u32768 alloc=8*4096
  26. [    0.000000] pcpu-alloc: [0] 0 [0] 1
  27. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520192
  28. [    0.000000] Kernel command line: console=tty0 root=/dev/sda2 loglevel=8 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 rootfstype=ext4 rootflags=discard
  29. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  30. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  31. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  32. [    0.000000] allocated 4194304 bytes of page_cgroup
  33. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  34. [    0.000000] Memory: 2048MB = 2048MB total
  35. [    0.000000] Memory: 1818480k/1818480k available, 278672k reserved, 1318912K highmem
  36. [    0.000000] Virtual kernel memory layout:
  37. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  38. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  39. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  40. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  41. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  42. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  43. [    0.000000]       .text : 0xc0008000 - 0xc0868fb8   (8580 kB)
  44. [    0.000000]       .init : 0xc0869000 - 0xc089ce00   ( 208 kB)
  45. [    0.000000]       .data : 0xc089e000 - 0xc090b788   ( 438 kB)
  46. [    0.000000]        .bss : 0xc090b7ac - 0xc0ac9578   (1784 kB)
  47. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  48. [    0.000000] Preemptible hierarchical RCU implementation.
  49. [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
  50. [    0.000000]  Additional per-CPU info printed with stalls.
  51. [    0.000000] NR_IRQS:192
  52. [    0.000000] Architected local timer running at 24.00MHz.
  53. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  54. [    0.000000] start_kernel(): bug: interrupts were enabled early
  55. [    0.000000] Console: colour dummy device 80x30
  56. [    0.000000] console [tty0] enabled
  57. [    0.013940] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
  58. [    0.076012] pid_max: default: 32768 minimum: 301
  59. [    0.079702] Mount-cache hash table entries: 512
  60. [    0.083970] Initializing cgroup subsys cpuacct
  61. [    0.087313] Initializing cgroup subsys memory
  62. [    0.090753] Initializing cgroup subsys devices
  63. [    0.094203] Initializing cgroup subsys freezer
  64. [    0.097442] Initializing cgroup subsys blkio
  65. [    0.101128] Initializing cgroup subsys perf_event
  66. [    0.104722] CPU: Testing write buffer coherency: ok
  67. [    0.109931] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  68. [    0.117053] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  69. [    0.122611] Setting up static identity map for 0x405e5c28 - 0x405e5c80
  70. [    0.238568] CPU1: Booted secondary processor
  71. [    0.297538] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  72. [    0.299547] Brought up 2 CPUs
  73. [    0.304901] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
  74. [    0.308164] devtmpfs: initialized
  75. [    0.313893] dummy:
  76. [    0.323829] NET: Registered protocol family 16
  77. [    0.345346] DMA: preallocated 256 KiB pool for atomic coherent allocations
  78. [    0.353252] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  79. [    0.358075] hw-breakpoint: maximum watchpoint size is 8 bytes.
  80. [    0.361278] [ccu-inf] aw clock manager init
  81. [    0.363563] [ccu-inf] aw_ccu_init
  82. [    0.367535] [ccu-inf] script config pll3 to 297MHz
  83. [    0.371303] [ccu-inf] script config pll4 to 300MHz
  84. [    0.375084] [ccu-inf] script config pll6 to 600MHz
  85. [    0.378845] [ccu-inf] script config pll7 to 297MHz
  86. [    0.382604] [ccu-inf] script config pll8 to 336MHz
  87. [    0.385390] Init eGon pin module V2.0
  88. [    0.394363] bio: create slab <bio-0> at 0
  89. [    0.397872] sunxi_gpio driver init ver 1.3
  90. [    0.403518] gpiochip_add: registered GPIOs 1 to 2 on device: A1X_GPIO
  91. [    0.406655] SCSI subsystem initialized
  92. [    0.409576] libata version 3.00 loaded.
  93. [    0.414249] usbcore: registered new interface driver usbfs
  94. [    0.418610] usbcore: registered new interface driver hub
  95. [    0.422822] usbcore: registered new device driver usb
  96. [    0.425972] Linux media interface: v0.10
  97. [    0.429609] Linux video capture interface: v2.00
  98. [    0.435248] Advanced Linux Sound Architecture Driver Version 1.0.25.
  99. [    0.441341] cfg80211: Calling CRDA to update world regulatory domain
  100. [    0.445987] Switching to clocksource arch_sys_counter
  101. [    0.448115] FS-Cache: Loaded
  102. [    0.450340] CacheFiles: Loaded
  103. [    0.463619] NET: Registered protocol family 2
  104. [    0.469998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  105. [    0.476995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  106. [    0.484576] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  107. [    0.491191] TCP: Hash tables configured (established 131072 bind 65536)
  108. [    0.493411] TCP: reno registered
  109. [    0.498301] UDP hash table entries: 512 (order: 2, 16384 bytes)
  110. [    0.503673] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  111. [    0.507325] NET: Registered protocol family 1
  112. [    0.512695] RPC: Registered named UNIX socket transport module.
  113. [    0.516382] RPC: Registered udp transport module.
  114. [    0.520090] RPC: Registered tcp transport module.
  115. [    0.525493] RPC: Registered tcp NFSv4.1 backchannel transport module.
  116. [    0.528206] pm: select wifi: ap6210
  117. [    0.530976] ap6xxx: config 32k clock
  118. [    0.534197] [wifi_pm]: wifi gpio init is OK !!
  119. [    0.537146] [rfkill]: rfkill set power 0
  120. [    0.542259] audit: initializing netlink socket (disabled)
  121. [    0.545982] type=2000 audit(0.520:1): initialized
  122. [    0.550321] highmem bounce pool size: 64 pages
  123. [    0.562322] VFS: Disk quotas dquot_6.5.2
  124. [    0.567834] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  125. [    0.574629] NFS: Registering the id_resolver key type
  126. [    0.579321] NTFS driver 2.1.30 [Flags: R/W].
  127. [    0.582684] fuse init (API version 7.18)
  128. [    0.590494] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  129. [    0.594719] msgmni has been set to 1359
  130. [    0.605652] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  131. [    0.608905] alg: No test for stdrng (krng)
  132. [    0.615635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  133. [    0.618548] io scheduler noop registered
  134. [    0.621824] io scheduler deadline registered
  135. [    0.625531] io scheduler cfq registered (default)
  136. [    0.630420] sunxi disp driver loaded (/dev/disp api 1.0)
  137. [    0.636029] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  138. [    0.640611] [uart]: used uart info.: 0x05
  139. [    0.645323] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  140. [    0.671637] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  141. [    1.418528] console [ttyS0] enabled
  142. [    1.426905] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  143. [    1.458836] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  144. [    1.468420] G2D: drv_g2d_init
  145. [    1.476097] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
  146. [    1.485096] G2D: head:d0000000,tail:d1000000
  147. [    1.492733] G2D: Module initialized.major:250
  148. [    1.500128] brd: module loaded
  149. [    1.509026] loop: module loaded
  150. [    1.515533] [NAND] nand driver version: 0x2 0x9
  151. [    1.578276] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
  152. [    1.591375] Dev Sunxi softw311 nand magic does not match for MBR 2:
  153. [    1.604447] Dev Sunxi softw311 nand magic does not match for MBR 3:
  154. [    1.617510] Dev Sunxi softw311 nand magic does not match for MBR 4:
  155. [    1.632307] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
  156. [    1.650551] Dev Sunxi softw411 nand: part 1, start 32768, size 131072
  157. [    1.662614] Dev Sunxi softw411 nand: part 2, start 163840, size 8388608
  158. [    1.674898] Dev Sunxi softw411 nand: part 3, start 8552448, size 6488064
  159. [    1.684143]  nand: nanda nandb nandc
  160. [    1.690798] [NAND]nand driver, ok.
  161. [    1.700671] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  162. [    1.711972] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  163. [    1.724747] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  164. [    1.739652] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  165. [    1.751410] scsi0 : sw_ahci_platform
  166. [    1.762201] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  167. [    1.773710] PPP generic driver version 2.4.2
  168. [    1.781926] PPP BSD Compression module registered
  169. [    1.790657] PPP Deflate Compression module registered
  170. [    1.800722] PPP MPPE Compression module registered
  171. [    1.808932] NET: Registered protocol family 24
  172. [    1.819238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  173. [    1.831043] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  174. [    1.839759] [sw-ohci1]: open clock
  175. [    1.865855] [sw-ohci1]: Set USB Power ON
  176. [    1.875887] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  177. [    1.889301] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 1
  178. [    1.900695] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  179. [    1.973567] hub 1-0:1.0: USB hub found
  180. [    1.980288] hub 1-0:1.0: 1 port detected
  181. [    1.986935] [sw-ohci2]: open clock
  182. [    2.013046] [sw-ohci2]: Set USB Power ON
  183. [    2.023081] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  184. [    2.036466] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 2
  185. [    2.047843] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  186. [    2.113458] hub 2-0:1.0: USB hub found
  187. [    2.120166] hub 2-0:1.0: 1 port detected
  188. [    2.129432] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  189. [    2.137845] sunxi_musb_drvinit():
  190. [    2.143449] sunxi_musb_probe():
  191. [    2.148754] sunxi_musb_init():
  192. [    2.153844] usb_clock_init():
  193. [    2.158800] open_usb_clock():
  194. [    2.183435] UsbPhyInit():
  195. [    2.189056] sunxi_musb_board_priv_init():
  196. [    2.194494] pin_init():
  197. [    2.199847] USBC_ForceId(): id_type host
  198. [    2.207429] USBC_ForceVbusValid(): vbus_type high
  199. [    2.214426] sunxi_musb_disable():
  200. [    2.227276] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  201. [    2.241128] musb-hdrc: MHDRC RTL version 0.0
  202. [    2.249495] musb-hdrc: 11/11 max ep, 5184/8192 memory
  203. [    2.258685] musb-hdrc musb-hdrc: MUSB HDRC host driver
  204. [    2.270275] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 3
  205. [    2.280865] hub 3-0:1.0: USB hub found
  206. [    2.287513] hub 3-0:1.0: 1 port detected
  207. [    2.293680] sunxi_musb_enable():
  208. [    2.300136] sunxi_musb sunxi_musb: is_on = 1
  209. [    2.308148] sunxi_musb_board_priv_set_phy_power():
  210. [    2.316768] sunxi_musb sunxi_musb: Set USB Power On
  211. [    2.322076] usb 1-1: new low-speed USB device number 2 using sw-ohci
  212. [    2.336189] USBC_ForceId(): id_type host
  213. [    2.343767] USBC_ForceVbusValid(): vbus_type high
  214. [    2.355966] musb-hdrc musb-hdrc: USB Host mode controller at f00d2000 using PIO, IRQ 70
  215. [    2.368763] mousedev: PS/2 mouse device common for all mice
  216. [    2.379571] input: sunxi-ir as /devices/virtual/input/input0
  217. [    2.386775] IR Initial OK
  218. [    2.394986] ===========================hv_keypad_init=====================
  219. [    2.405270] ========HV Inital ===================
  220. [    2.413913] tkey_fetch_sysconfig_para: tkey_unused.
  221. [    2.426106] hv_keypad_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0
  222. [    2.440089] usbcore: registered new interface driver usbtouchscreen
  223. [    2.452556] i2c-core: driver [synaptics-rmi-ts] using legacy suspend method
  224. [    2.465379] i2c-core: driver [synaptics-rmi-ts] using legacy resume method
  225. [    2.475157] rtc: get i2c master0 failed
  226. [    2.483931] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
  227. [    2.494898] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  228. [    2.503581] i2c /dev entries driver
  229. [    2.510765] config i2c gpio with gpio_config api
  230. [    2.521092] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  231. [    2.531480] [AXP]axp driver uning configuration failed(342)
  232. [    2.539003] [AXP]power_start = 0
  233. [    2.545951] i2c i2c-0: Invalid probe address 0x00
  234. [    2.553745] I2C: i2c-0: AW16XX I2C adapter
  235. [    2.559688] [ace_drv] start!!!
  236. [    2.565164] [ace_drv] init end!!!
  237. [    2.570218] [pa_drv] start!!!
  238. [    2.575498] [pa_drv] init end!!!
  239. [    2.581135] axp20_ldo1: 1300 mV
  240. [    2.589592] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  241. [    2.599820] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  242. [    2.610091] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  243. [    2.620479] axp20_buck2: 700 <--> 2275 mV at 1450 mV
  244. [    2.630756] axp20_buck3: 700 <--> 3500 mV at 1300 mV
  245. [    2.640705] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  246. [    2.655503] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  247. [    2.683793] axp20_ldo2: Failed to create debugfs directory
  248. [    2.694396] device-mapper: uevent: version 1.0.3
  249. [    2.706896] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  250. [    2.720290] device-mapper: multipath: version 1.3.0 loaded
  251. [    2.731289] device-mapper: multipath round-robin: version 1.0.0 loaded
  252. [    2.743400] device-mapper: multipath queue-length: version 0.1.0 loaded
  253. [    2.755600] device-mapper: multipath service-time: version 0.2.0 loaded
  254. [    2.765530] cpuidle: using governor ladder
  255. [    2.772534] cpuidle: using governor menu
  256. [    2.778787] [mmc-msg] sw_mci_init
  257. [    2.787865] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  258. [    2.800638] [mmc-msg] sdc0 set round clock 400000, src 24000000
  259. [    2.814912] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  260. [    2.832178] [mmc-msg] sdc0 Probe: base:0xf00d8000 irq:64 sg_cpu:c3c59000(43c59000) ret 0.
  261. [    2.846097] [mmc-msg] sdc3 set round clock 400000, src 24000000
  262. [    2.860318] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  263. [    2.877567] [mmc-msg] sdc3 Probe: base:0xf00da000 irq:67 sg_cpu:c3c5a000(43c5a000) ret 0.
  264. [    2.890345] [mmc_pm]: failed to fetch sdio card configuration!
  265. [    2.898555] sunxi_leds driver init
  266. [    2.906002] Registered led device: blue:ph21:led1
  267. [    2.914672] Registered led device: orange:ph20:led2
  268. [    2.923395] Registered led device: white:ph11:led3
  269. [    2.932039] Registered led device: green:ph07:led4
  270. [    2.941906] ledtrig-cpu: registered to indicate activity on CPUs
  271. [    2.964457] input: SINO WEALTH USB KEYBOARD as /devices/platform/sw-ohci.1/usb1/1-1/1-1:1.0/input/input2
  272. [    2.984619] generic-usb 0003:258A:0001.0001: input: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-sw-ohci-1/input0
  273. [    3.016856] input: SINO WEALTH USB KEYBOARD as /devices/platform/sw-ohci.1/usb1/1-1/1-1:1.1/input/input3
  274. [    3.037613] generic-usb 0003:258A:0001.0002: input,hiddev0: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-sw-ohci-1/input1
  275. [    3.054148] usbcore: registered new interface driver usbhid
  276. [    3.062570] usbhid: USB HID core driver
  277. [    3.071687] i2c-core: driver [cptm1217] using legacy suspend method
  278. [    3.083100] i2c-core: driver [cptm1217] using legacy resume method
  279. [    3.092026] ashmem: initialized
  280. [    3.098783] logger: created 256K log 'log_main'
  281. [    3.107168] logger: created 256K log 'log_events'
  282. [    3.115587] logger: created 256K log 'log_radio'
  283. [    3.124009] logger: created 256K log 'log_system'
  284. [    3.135129] IPv4 over IPv4 tunneling driver
  285. [    3.142183] TCP: bic registered
  286. [    3.147609] TCP: cubic registered
  287. [    3.153493] TCP: westwood registered
  288. [    3.159700] TCP: highspeed registered
  289. [    3.165631] TCP: hybla registered
  290. [    3.171138] TCP: htcp registered
  291. [    3.176634] TCP: vegas registered
  292. [    3.182144] TCP: veno registered
  293. [    3.187900] TCP: scalable registered
  294. [    3.193498] TCP: lp registered
  295. [    3.198745] TCP: yeah registered
  296. [    3.204501] TCP: illinois registered
  297. [    3.211312] Initializing XFRM netlink socket
  298. [    3.219763] NET: Registered protocol family 10
  299. [    3.228590] NET: Registered protocol family 17
  300. [    3.236553] NET: Registered protocol family 15
  301. [    3.245680] [mmc_pm]: No sdio card, please check your config !!
  302. [    3.255291] Registering the dns_resolver key type
  303. [    3.262088] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  304. [    3.278334] Registering SWP/SWPB emulation handler
  305. [    3.287759] axp20_buck2: Failed to create debugfs directory
  306. [    3.299528] [cpu_freq] INF:-------------------V-F Table-------------------
  307. [    3.311473] [cpu_freq] INF:  voltage = 1450mv        frequency = 1008MHz
  308. [    3.322623] [cpu_freq] INF:  voltage = 1425mv        frequency =  912MHz
  309. [    3.333772] [cpu_freq] INF:  voltage = 1350mv        frequency =  864MHz
  310. [    3.344921] [cpu_freq] INF:  voltage = 1250mv        frequency =  720MHz
  311. [    3.356071] [cpu_freq] INF:  voltage = 1150mv        frequency =  528MHz
  312. [    3.367219] [cpu_freq] INF:  voltage = 1100mv        frequency =  312MHz
  313. [    3.378367] [cpu_freq] INF:  voltage = 1050mv        frequency =  144MHz
  314. [    3.389512] [cpu_freq] INF:  voltage = 1000mv        frequency =    0MHz
  315. [    3.401438] [cpu_freq] INF:-----------------------------------------------
  316. [    3.418061] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 720MHz
  317. [    3.432642] registered taskstats version 1
  318. [    3.441555] I2C: i2c-1: HDMI I2C adapter
  319. [    3.467314] ParseEDID
  320. [    3.484266] EDID version: 1.3
  321. [    3.493522] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
  322. [    3.504678] Using above mode as preferred EDID mode
  323. [    3.524925] Unimplemented SVD code 2
  324. [    3.531049] Unimplemented SVD code 6
  325. [    3.537239] Unimplemented SVD code 15
  326. [    3.543528] Unimplemented SVD code 14
  327. [    3.549817] Unimplemented SVD code 31
  328. [    3.556095] Unimplemented SVD code 30
  329. [    3.562380] Unimplemented SVD code 29
  330. [    3.568669] Unimplemented SVD code 17
  331. [    3.574946] Unimplemented SVD code 22
  332. [    3.580887] Reserved SVD code 127
  333. [    3.590052] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  334. [    3.602851] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  335. [    3.615649] disp_clk: Could not find a matching pll-freq for 25150000 pclk
  336. [    3.628362] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  337. [    3.641078] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  338. [    3.653886] disp_clk: Could not find a matching pll-freq for 146850000 pclk
  339. [    3.666770] disp_clk: Could not find a matching pll-freq for 172900000 pclk
  340. [    3.679569] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  341. [    3.692285] disp_clk: Could not find a matching pll-freq for 53450000 pclk
  342. [    3.705000] disp_clk: Could not find a matching pll-freq for 27100000 pclk
  343. [    3.717712] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  344. [    3.729045] Parse_VideoData_Block: VIC 16 (native) support
  345. [    3.738113] Parse_VideoData_Block: VIC 5 support
  346. [    3.746307] Parse_VideoData_Block: VIC 4 support
  347. [    3.754506] Parse_VideoData_Block: VIC 3 support
  348. [    3.762703] Parse_VideoData_Block: VIC 2 support
  349. [    3.770899] Parse_VideoData_Block: VIC 7 support
  350. [    3.779083] Parse_VideoData_Block: VIC 6 support
  351. [    3.787367] Parse_VideoData_Block: VIC 15 support
  352. [    3.795737] Parse_VideoData_Block: VIC 14 support
  353. [    3.804104] Parse_VideoData_Block: VIC 31 support
  354. [    3.817480] Parse_VideoData_Block: VIC 20 support
  355. [    3.825851] Parse_VideoData_Block: VIC 30 support
  356. [    3.834226] Parse_VideoData_Block: VIC 29 support
  357. [    3.842600] Parse_VideoData_Block: VIC 19 support
  358. [    3.850971] Parse_VideoData_Block: VIC 18 support
  359. [    3.859329] Parse_VideoData_Block: VIC 17 support
  360. [    3.867697] Parse_VideoData_Block: VIC 22 support
  361. [    3.875980] Parse_VideoData_Block: VIC 1 support
  362. [    3.884177] Parse_AudioData_Block: max channel=2
  363. [    3.892806] Parse_AudioData_Block: SampleRate code=7f
  364. [    3.901523] Parse_AudioData_Block: WordLen code=7
  365. [    3.909720] Find HDMI Vendor Specific DataBlock
  366. [    3.920512] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
  367. [    3.933664] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
  368. [    3.946378] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  369. [    3.959525] PCLK=148500000 X 1920 2448 2492 2640 Y 1080 1084 1089 1125 fr 50 PP
  370. [    3.972332] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  371. [    3.985233] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  372. [    3.994430] waited 0 ms for EDID info
  373. [    4.004662] disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
  374. [    5.323107] Console: switching to colour frame buffer device 240x67
  375. [    5.372712] axp20_buck3: incomplete constraints, leaving on
  376. [    5.383237] axp20_buck2: incomplete constraints, leaving on
  377. [    5.393659] axp20_ldo4: incomplete constraints, leaving on
  378. [    5.403984] axp20_ldo3: incomplete constraints, leaving on
  379. [    5.414303] axp20_ldo2: incomplete constraints, leaving on
  380. [    5.424622] axp20_ldo1: incomplete constraints, leaving on
  381. [    5.433315] console [netcon0] enabled
  382. [    5.440597] netconsole: network logging started
  383. [    5.452769] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  384. [    5.463595] ALSA device list:
  385. [    5.469729]   #0: sunxi-CODEC  Audio Codec
  386. [    5.476030]   #1: sunxi-sndhdmi
  387. [    7.161563] ata1: link is slow to respond, please be patient (ready=0)
  388. [   11.789402] ata1: COMRESET failed (errno=-16)
  389. [   17.181562] ata1: link is slow to respond, please be patient (ready=0)
  390. [   17.611225] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  391. [   17.831058] ata1.00: ATA-8: WDC WD20EARS-00J99B0, 80.00A80, max UDMA/133
  392. [   17.843762] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  393. [   17.859878] ata1.00: configured for UDMA/133
  394. [   17.883691] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARS-00J 80.0 PQ: 0 ANSI: 5
  395. [   17.899740] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  396. [   17.904014] sd 0:0:0:0: Attached scsi generic sg0 type 0
  397. [   17.921789] sd 0:0:0:0: [sda] 4096-byte physical blocks
  398. [   17.931326] sd 0:0:0:0: [sda] Write Protect is off
  399. [   17.940328] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  400. [   17.953683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  401. [   17.974572]  sda: sda1 sda2
  402. [   17.982853] sd 0:0:0:0: [sda] Attached SCSI disk
  403. [   18.411295] EXT4-fs (sda2): recovery complete
  404. [   18.431086] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
  405. [   18.444019] VFS: Mounted root (ext4 filesystem) on device 8:2.
  406. [   18.452181] devtmpfs: mounted
  407. [   18.458228] Freeing init memory: 204K
  408. [   18.467706] Write protecting the kernel text section c0008000 - c083a000
  409. [   19.243271] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
  410. [   19.266014] systemd[1]: Detected architecture 'arm'.
  411. [   19.310183] systemd[1]: Set hostname to <cubier>.
  412. [   20.352601] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  413. [   20.391199] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  414. [   20.416035] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  415. [   20.438461] systemd[1]: Expecting device dev-ttyS0.device...
  416. [   20.482918] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
  417. [   20.520421] systemd[1]: Starting Remote File Systems.
  418. [   20.560881] systemd[1]: Reached target Remote File Systems.
  419. [   20.584175] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  420. [   20.610168] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  421. [   20.638200] systemd[1]: Starting Paths.
  422. [   20.669681] systemd[1]: Reached target Paths.
  423. [   20.692957] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  424. [   20.744725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  425. [   20.769640] systemd[1]: Starting Encrypted Volumes.
  426. [   20.810710] systemd[1]: Reached target Encrypted Volumes.
  427. [   20.830515] systemd[1]: Starting Swap.
  428. [   20.869577] systemd[1]: Reached target Swap.
  429. [   20.888733] systemd[1]: Starting Root Slice.
  430. [   20.980084] systemd[1]: Created slice Root Slice.
  431. [   21.000607] systemd[1]: Starting User and Session Slice.
  432. [   21.041081] systemd[1]: Created slice User and Session Slice.
  433. [   21.063474] systemd[1]: Starting Device-mapper event daemon FIFOs.
  434. [   21.101863] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  435. [   21.125331] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  436. [   21.172289] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  437. [   21.194934] systemd[1]: Starting Delayed Shutdown Socket.
  438. [   21.237418] systemd[1]: Listening on Delayed Shutdown Socket.
  439. [   21.258891] systemd[1]: Starting Journal Socket (/dev/log).
  440. [   21.301251] systemd[1]: Listening on Journal Socket (/dev/log).
  441. [   21.322917] systemd[1]: Starting LVM2 metadata daemon socket.
  442. [   21.361422] systemd[1]: Listening on LVM2 metadata daemon socket.
  443. [   21.382729] systemd[1]: Starting udev Control Socket.
  444. [   21.420727] systemd[1]: Listening on udev Control Socket.
  445. [   21.441291] systemd[1]: Starting udev Kernel Socket.
  446. [   21.480708] systemd[1]: Listening on udev Kernel Socket.
  447. [   21.500986] systemd[1]: Starting Journal Socket.
  448. [   21.540304] systemd[1]: Listening on Journal Socket.
  449. [   21.560097] systemd[1]: Starting System Slice.
  450. [   21.600231] systemd[1]: Created slice System Slice.
  451. [   21.620582] systemd[1]: Mounting Temporary Directory...
  452. [   21.701822] systemd[1]: Starting system-netctl\x2difplugd.slice.
  453. [   21.781861] systemd[1]: Created slice system-netctl\x2difplugd.slice.
  454. [   21.806131] systemd[1]: Starting system-getty.slice.
  455. [   21.860806] systemd[1]: Created slice system-getty.slice.
  456. [   21.882817] systemd[1]: Starting system-serial\x2dgetty.slice.
  457. [   21.931708] systemd[1]: Created slice system-serial\x2dgetty.slice.
  458. [   21.956006] systemd[1]: Starting udev Coldplug all Devices...
  459. [   22.018639] systemd[1]: Mounted POSIX Message Queue File System.
  460. [   22.058063] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  461. [   22.115647] systemd[1]: Started Set Up Additional Binary Formats.
  462. [   22.148707] systemd[1]: Starting Load Kernel Modules...
  463. [   22.201696] systemd[1]: Starting Setup Virtual Console...
  464. [   22.448658] systemd[1]: Mounting Debug File System...
  465. [   22.521355] systemd[1]: Mounted Huge Pages File System.
  466. [   22.541589] systemd[1]: Starting Journal Service...
  467. [   22.578007] gmac: use mac address from chipid
  468. [   22.596986] eth%d: device MAC address 02:d7:03:c3:12:df
  469. [   22.618679] [gmac]: sun6i_gmac platform driver registration completed
  470. [   22.666842] bcmdhd: got gpio2, mapped to irqno170
  471. [   22.689063] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
  472. [   22.712470] systemd[1]: Started Journal Service.
  473. [   22.819996] sdio wifi power state: on
  474. [   22.843391] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  475. [   22.898579] [mmc-msg] sdc3 power on
  476. [   22.944484] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  477. [   22.976348] [mmc-msg] sdc3 set round clock 400000, src 24000000
  478. [   23.033734] =========== WLAN placed in POWER ON ========
  479. [   23.070701] [mmc-err] smc 3 err, cmd 52,  RTO
  480. [   23.091012] [mmc-err] smc 3 err, cmd 52,  RTO
  481. [   23.114183] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  482. [   23.147577] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  483. [   23.171988] [mmc-err] smc 3 err, cmd 8,  RTO
  484. [   23.196177] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  485. [   23.229246] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  486. [   23.251897] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  487. [   23.273064] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  488. [   23.295270] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  489. [   23.332011] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  490. [   23.359213] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  491. [   23.389651] [mmc-msg] sdc3 set round clock 42857143, src 600000000
  492. [   23.464594] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  493. [   23.494366] mmc1: new high speed SDIO card at address 0001
  494. [   23.512896] Linux Kernel SDIO/MMC Driver
  495. [   23.534204] bcmdhd: irq=170, flags=0x00000414
  496. [   23.552475] dhdsdio_probe : no mutex held. set lock
  497. [   23.570906] F1 signature read @0x18000000=0x1591a962
  498. [   23.588832] bcmsdh_config_hw_oob_intr: Enter
  499. [   23.614719] DHD: dongle ram size is set to 245760(orig 245760)
  500. [   23.635641] dhd_attach, firmware path
  501. [   23.653958] wl_create_event_handler thr:59 created
  502. [   23.672705] wl_create_event_handler thr:59 started
  503. [   23.702343] p2p0: P2P Interface Registered
  504. [   23.718699] dhd_attach thr:5b created
  505. [   23.734300] dhd_attach thr:5b started
  506. [   23.753882] dhd_attach thr:5c created
  507. [   23.769415] dhd_attach thr:5c started
  508. [   23.784865] dhd_attach thr:5d created
  509. [   23.800091] dhd_attach thr:5d started
  510. [   23.820966] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  511. [   23.842005] dhdsdio_probe : the lock is released.
  512.  
  513. [   23.865973] Dongle Host Driver, version 1.28.23.3 (r)
  514. [   23.865979] Compiled in drivers/net/wireless/bcmdhd on Dec 30 2013 at 17:00:10
  515. [   23.914552] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
  516. [   24.079207] sdio wifi power state: off
  517. [   24.227284] =========== WLAN placed in RESET ========
  518. [   24.255147] UMP<2>: Inserting UMP device driver. Compiled: Dec 30 2013, time: 16:58:27
  519. [   24.281155] UMP<2>: Using OS memory backend, allocation limit: 134217728
  520. [   24.316238] UMP: UMP device driver  loaded
  521. [   24.367343] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432)
  522. [   24.397101] mali: use config clk_div 1
  523. [   24.412912] mali: clk_div 1
  524. [   24.426784] Mali: mali clock set completed, clock is  312000000 Hz
  525. [   24.450841] mali: use config clk_div 1
  526. [   24.456329] mali: clk_div 1
  527. [   24.457027] Mali: mali clock set completed, clock is  312000000 Hz
  528. [   24.470871] systemd-udevd[94]: starting version 216
  529. [   24.471414] Mali: Mali device driver loaded
  530. [   24.679693] [cedar dev]: install start!!!
  531. [   24.697545] [cedar dev]: install end!!!
  532. [  111.378663] systemd-journald[84]: Received request to flush runtime journal from PID 1
  533. [  111.513987] systemd-journald[84]: File /var/log/journal/bef254e7fd904a3faaed5abbedb6262d/system.journal corrupted or uncleanly shut down, renaming and replacing.
  534. [  112.066439] systemd-journald[84]: Deleted empty journal /var/log/journal/bef254e7fd904a3faaed5abbedb6262d/system@8f9510c450984104b0fed6634a7d4654-0000000000000000-0000000000000000.journal (8388608 bytes).
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top