Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Booting Linux on physical CPU 0x0
- [ 0.000000@0] Linux version 4.9.113 (relkai@hammbwcor01) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Thu Mar 4 01:36:43 UTC 2021
- [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000@0] CoreELEC dt-id: gxl_p212_2g
- [ 0.000000@0] Machine model: Amlogic
- [ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
- [ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
- [ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
- [ 0.000000@0] 78000000 - 80000000, 131072 KB, linux,ion-dev
- [ 0.000000@0] 76000000 - 78000000, 32768 KB, linux,di_cma
- [ 0.000000@0] __reserved_mem_alloc_size, start:0x000000007f800000, end:0x0000000080000000, len:8 MiB
- [ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:8 MB
- [ 0.000000@0] Reserved memory: created DMA memory pool at 0x0000000076000000, size 0 MiB
- [ 0.000000@0] 76000000 - 76000000, 0 KB, linux,ppmgr
- [ 0.000000@0] 60400000 - 73800000, 315392 KB, linux,codec_mm_cma
- [ 0.000000@0] 76000000 - 76000000, 0 KB, linux,codec_mm_reserved
- [ 0.000000@0] 75000000 - 76000000, 16384 KB, linux,vdin1_cma
- [ 0.000000@0] cma: Reserved 8 MiB at 0x0000000074800000
- [ 0.000000@0] On node 0 totalpages: 524032
- [ 0.000000@0] DMA zone: 8188 pages used for memmap
- [ 0.000000@0] DMA zone: 0 pages reserved
- [ 0.000000@0] DMA zone: 524032 pages, LIFO batch:31
- [ 0.000000@0] psci: probing for conduit method from DT.
- [ 0.000000@0] psci: PSCIv0.2 detected in firmware.
- [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000@0] psci: Trusted OS migration not required
- [ 0.000000@0] percpu: Embedded 22 pages/cpu @ffffffc074751000 s51672 r8192 d30248 u90112
- [ 0.000000@0] pcpu-alloc: s51672 r8192 d30248 u90112 alloc=22*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Detected VIPT I-cache on CPU0
- [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515844
- [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=disabled logo=osd1,loaded,0x3d800000,2160p60hz420 maxcpus=4 vout=2160p60hz420,enable hdmimode=2160p60hz420 cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=ce:87:29:a7:39:c0 androidboot.mac=ce:87:29:a7:39:c0 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 frac_rate_policy=0 native_4k_gui=0 quiet systemd.show_status=auto
- [ 0.000000@0] fb: osd1
- [ 0.000000@0] fb: loaded
- [ 0.000000@0] fb: 0x3d800000
- [ 0.000000@0] fb: 2160p60hz420
- [ 0.000000@0] vout: 2160p60hz420
- [ 0.000000@0] vout: enable: 1
- [ 0.000000@0] vout: get hdmimode: 2160p60hz420
- [ 0.000000@0] vout: get cvbsmode: 576cvbs
- [ 0.000000@0] vout: get hdmimode: 1080p60hz
- [ 0.000000@0] fb: osd0
- [ 0.000000@0] fb: loaded
- [ 0.000000@0] fb: 0x3d800000
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000@0] Memory: 1515476K/2096128K available (12414K kernel code, 1910K rwdata, 9328K rodata, 4864K init, 1492K bss, 72748K reserved, 507904K cma-reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
- [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
- [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009ca0000 ( 12416 KB)
- [ 0.000000@0] .rodata : 0xffffff8009ca0000 - 0xffffff800a5d0000 ( 9408 KB)
- [ 0.000000@0] .init : 0xffffff800a5d0000 - 0xffffff800aa90000 ( 4864 KB)
- [ 0.000000@0] .data : 0xffffff800aa90000 - 0xffffff800ac6d808 ( 1911 KB)
- [ 0.000000@0] .bss : 0xffffff800ac6d808 - 0xffffff800ade2aa4 ( 1493 KB)
- [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
- [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
- [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
- [ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf02000000 ( 31 MB actual)
- [ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc080000000 ( 2047 MB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] Build-time adjustment of leaf fanout to 64.
- [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
- [ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
- [ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
- [ 0.000000@0] amlogic_init_gpu: register meson gpu clk
- [ 0.000000@0] amlogic_init_media: register meson media clk
- [ 0.000000@0] amlogic_init_misc: register meson misc clk
- [ 0.000000@0] gxl_clkc_init initialization complete
- [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000037@0] meson_bc_timer: mclk->mux_reg =ffffff8008008990,mclk->reg =ffffff800800a994
- [ 0.000505@0] Console: colour dummy device 80x25
- [ 0.000593@0] console [tty0] enabled
- [ 0.000606@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.000613@0] pid_max: default: 32768 minimum: 301
- [ 0.000700@0] Security Framework initialized
- [ 0.000705@0] SELinux: Initializing.
- [ 0.000743@0] SELinux: Starting in permissive mode
- [ 0.000773@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000778@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.001341@0] ftrace: allocating 42364 entries in 166 pages
- [ 0.070445@0] sched-energy: CPU device node has no sched-energy-costs
- [ 0.070453@0] CPU0: update cpu_capacity 1024
- [ 0.070463@0] ASID allocator initialised with 65536 entries
- [ 0.113553@0] secmon: can't fine clear_range
- [ 0.114194@0] Meson chip version = RevA (21:A - 82:0)
- [ 0.162595@1] Detected VIPT I-cache on CPU1
- [ 0.162645@1] CPU1: update cpu_capacity 1024
- [ 0.162647@1] CPU1: Booted secondary processor [410fd034]
- [ 0.194649@2] Detected VIPT I-cache on CPU2
- [ 0.194689@2] CPU2: update cpu_capacity 1024
- [ 0.194691@2] CPU2: Booted secondary processor [410fd034]
- [ 0.226720@3] Detected VIPT I-cache on CPU3
- [ 0.226760@3] CPU3: update cpu_capacity 1024
- [ 0.226763@3] CPU3: Booted secondary processor [410fd034]
- [ 0.226840@0] Brought up 4 CPUs
- [ 0.226844@0] SMP: Total of 4 processors activated.
- [ 0.226849@0] CPU features: detected feature: 32-bit EL0 Support
- [ 0.226922@0] CPU: All CPU(s) started at EL2
- [ 0.226943@0] alternatives: patching kernel code
- [ 0.227861@0] devtmpfs: initialized
- [ 0.244750@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.244763@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.244930@0] pinctrl core: initialized pinctrl subsystem
- [ 0.245840@0] NET: Registered protocol family 16
- [ 0.247845@0] schedtune: init normalization constants...
- [ 0.247850@0] schedtune: no energy model data
- [ 0.247851@0] schedtune: disabled!
- [ 0.266766@0] cpuidle: using governor menu
- [ 0.266855@0] register canvas platform driver
- [ 0.266884@0] register rdma platform driver
- [ 0.268845@0] vdso: 2 pages (1 code @ ffffff8009ca7000, 1 data @ ffffff800aa95000)
- [ 0.268861@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.269795@0] DMA: preallocated 2048 KiB pool for atomic allocations
- [ 0.269973@0] clkmsr: clkmsr: driver init
- [ 0.269977@0] codec_mm_module_init
- [ 0.270021@0] media_configs_system_init
- [ 0.272151@0] aml_iomap: amlogic iomap probe done
- [ 0.275406@0] vpu: driver version: v20190329(2-gxl)
- [ 0.275415@0] vpu: load vpu_clk: 666666667Hz(7)
- [ 0.275592@0] vpu: clktree_init
- [ 0.275645@0] vpu: vpu_probe OK
- [ 0.278161@0] clkmsr: msr_clk_reg0=ffffff800822975c,msr_clk_reg2=ffffff800822b764
- [ 0.278172@0] clkmsr c110875c.meson_clk_msr: failed to get msr ring reg0
- [ 0.279241@0] aml_vdac_config_probe: cpu_id:0, name:meson-gx_l_m-vdac
- [ 0.279429@0] aml_vdac_probe: ok
- [ 0.282375@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
- [ 0.282458@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
- [ 0.282461@0] codec_mm_probe ok
- [ 0.282650@0] canvas_probe reg=00000000c8838000,size=400
- [ 0.282664@0] canvas maped reg_base =ffffff8008245000
- [ 0.288525@0] cvbs_out: cvbsout_probe, cpu_id:0,name:meson-gxl-cvbsout
- [ 0.288635@0] cvbs_out: find performance_pal config
- [ 0.288645@0] vout: vout1: register server: cvbs_vout_server
- [ 0.288648@0] cvbs_out: register cvbs module server ok
- [ 0.288651@0] vout: vout2: register server: cvbs_vout2_server
- [ 0.288653@0] cvbs_out: register cvbs module vout2 server ok
- [ 0.288657@0] cvbs_out: chrdev devno 264241152 for disp
- [ 0.288856@0] cvbs_out: create cdev cvbs
- [ 0.288860@0] cvbs_out: cvbsout_probe OK
- [ 0.290814@0] rdma_probe,cpu_type:1, ver:0, len:8
- [ 0.290822@0] vpu: switch_vpu_mem_pd: unsupport vpu mod: 57
- [ 0.291095@0] rdma_register, rdma_table_addr ffffff8008247000 rdma_table_addr_phy 74a00000 reg_buf ffffffc05de10000
- [ 0.291102@0] rdma_register success, handle 1 table_size 32768
- [ 0.291106@0] set_rdma_handle video rdma handle = 1.
- [ 0.291148@0] classs created ok
- [ 0.291157@0] classs file created ok
- [ 0.469480@0] SCSI subsystem initialized
- [ 0.469670@0] libata version 3.00 loaded.
- [ 0.469939@0] usbcore: registered new interface driver usbfs
- [ 0.469990@0] usbcore: registered new interface driver hub
- [ 0.470079@0] usbcore: registered new device driver usb
- [ 0.470213@0] pps_core: LinuxPPS API ver. 1 registered
- [ 0.470216@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.470236@0] PTP clock support registered
- [ 0.470714@0] secmon: reserve_mem_size:0x300000
- [ 0.470772@0] secmon secmon: assigned reserved memory node linux,secmon
- [ 0.470949@0] secmon: get page:ffffffbf00140000, 5000
- [ 0.470955@0] secmon: share in base: 0xffffffc0100fe000, share out base: 0xffffffc0100ff000
- [ 0.470957@0] secmon: phy_in_base: 0x100fe000, phy_out_base: 0x100ff000
- [ 0.471443@0] hdmitx: system: Ver: 20190815
- [ 0.471532@0] hdmitx: system: hdmitx_device.drm_feature : 0
- [ 0.471551@0] hdmitx: system: hpd irq = 38
- [ 0.472156@0] hdmitx: hdmitx20: Mapped PHY: 0xc1109800
- [ 0.472166@0] hdmitx: hdmitx20: Mapped PHY: 0xc8834400
- [ 0.472172@0] hdmitx: hdmitx20: Mapped PHY: 0xd0100000
- [ 0.472189@0] hdmitx: hdmitx20: Mapped PHY: 0xc8100000
- [ 0.472193@0] hdmitx: hdmitx20: Mapped PHY: 0xc883c000
- [ 0.472197@0] hdmitx: hdmitx20: Mapped PHY: 0xc1104400
- [ 0.472200@0] hdmitx: hdmitx20: Mapped PHY: 0xc883a000
- [ 0.472203@0] hdmitx: hdmitx20: Mapped PHY: 0xda83a000
- [ 0.472207@0] hdmitx: hdmitx20: Mapped PHY: 0xd0044000
- [ 0.472215@0] hdmitx: hw: alread display in uboot 0x861
- [ 0.472263@0] hdmitx: hw: avmute set to 1
- [ 0.600045@0] hdmitx: edid: EDID Parser:
- [ 0.600071@0] [RX]-up_phy_addr = 2
- [ 0.600084@0] hdmitx: Edid_ParsingVendSpec:ieeeoui=0x90848b,len=5
- [ 0.600086@0] hdmitx: Edid_ParsingVendSpec:ieeeoui=0x90848b,len=5
- [ 0.600091@0] hdmitx: edid: change preferred_mode from 0 to 97
- [ 0.600094@0] hdmitx: hdmitx: get PMT vic: 97
- [ 0.600098@0] hdmitx: edid: find IEEEOUT
- [ 0.600156@0] hdmitx: edid: blk0 raw data
- [ 0.600192@0] hdmitx: edid:
- [ 0.600192@0] 00ffffffffffff004c2d0b0f000e0001011c0103808e50780a23ada4544d9926
- [ 0.600192@0] 0f474abdef80714f81c0810081809500a9c0b300d1c008e80030f2705a80b058
- [ 0.600192@0] 8a00501d7400001e662156aa51001e30468f3300501d7400001e000000fd0018
- [ 0.600192@0] 780fb93c000a202020202020000000fc0053414d53554e470a202020202001c4
- [ 0.600192@0]
- [ 0.600192@0]
- [ 0.600195@0] hdmitx: edid: blk1 raw data
- [ 0.600229@0] hdmitx: edid:
- [ 0.600229@0] 020359f05961101f041305142021225d5e5f606566626364071603123f402909
- [ 0.600229@0] 070715075057070183010000e2004fe305c3016e030c002000b83c2800800102
- [ 0.600229@0] 030468d85dc40178800302e3060d01e30f01e0e5018b8490016fc200a0a0a055
- [ 0.600229@0] 5030203500501d7400001a000000000000000000000000000000000000000083
- [ 0.600229@0]
- [ 0.600229@0]
- [ 0.600234@0] vout: vout1: register server: hdmitx_vout_server
- [ 0.600237@0] vout: vout2: register server: hdmitx_vout2_server
- [ 0.601257@0] hdmitx: system: irq 80000002 0
- [ 0.601666@0] vout: create vout attribute OK
- [ 0.601825@0] vout: vout_fops_create OK
- [ 0.601830@0] vout: vout1: register server: nulldisp_vout_server
- [ 0.601927@0] vout: tvout monitor interval:500(ms), timeout cnt:20
- [ 0.601952@0] hdmitx: hdmitx_set_current_vmode[4794]
- [ 0.601955@0] hdmitx: system: recalc before 2160p60hz420 60 1
- [ 0.601959@0] hdmitx: system: recalc after 2160p60hz420 60 1
- [ 0.601960@0] hdmitx: alread display in uboot
- [ 0.601964@0] hdmitx: system: update rx hdr info d
- [ 0.601966@0] vout: init mode 2160p60hz420 set ok
- [ 0.601968@0] vout: aml_tvout_mode_monitor
- [ 0.601979@0] vout: aml_vout_probe OK
- [ 0.602589@0] chip type:0x21
- [ 0.603073@0] MEMORY:[100000+7ff00000]
- [ 0.603080@0] ramdump_probe, storage device:data
- [ 0.603083@0] NO valid ramdump args:0 0
- [ 0.603100@0] ramdump_probe, set sticky to 8800
- [ 0.603347@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.604318@0] NetLabel: Initializing
- [ 0.604323@0] NetLabel: domain hash size = 128
- [ 0.604325@0] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.604383@0] NetLabel: unlabeled traffic allowed by default
- [ 0.606661@0] clocksource: Switched to clocksource arch_sys_counter
- [ 0.608087@0] hdmitx: system: irq 80000002 0
- [ 0.661457@3] VFS: Disk quotas dquot_6.6.0
- [ 0.661532@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.661675@3] FS-Cache: Loaded
- [ 0.673531@3] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
- [ 0.673862@3] NET: Registered protocol family 2
- [ 0.674505@3] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.674616@3] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.674902@3] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.675026@3] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.675065@3] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.675297@3] NET: Registered protocol family 1
- [ 0.675752@3] RPC: Registered named UNIX socket transport module.
- [ 0.675755@3] RPC: Registered udp transport module.
- [ 0.675758@3] RPC: Registered tcp transport module.
- [ 0.675760@3] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.675770@3] PCI: CLS 0 bytes, default 64
- [ 0.677197@3] wifi: power_on_pin_OD = 0;
- [ 0.677208@3] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
- [ 0.677295@3] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 0.677312@3] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
- [ 0.677316@3] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
- [ 0.677319@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem(): 100.10.545.3
- [ 0.677695@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
- [ 0.677702@3] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=487
- [ 0.677707@3] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
- [ 0.677711@3] aml_wifi wifi: [wifi_dev_probe] power_on_pin=486
- [ 0.677715@3] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
- [ 0.678058@3] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
- [ 0.678197@3] aml_wifi wifi: [wifi_setup_dt] irq num is:(49)
- [ 0.678203@3] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(487)
- [ 0.678229@3] aml_wifi wifi: [wifi_setup_dt] power_on_pin(486)
- [ 0.678494@3] Unpacking initramfs...
- [ 0.695221@3] Freeing initrd memory: 4988K
- [ 0.697412@3] hw perfevents: clusterb_enabled = 0
- [ 0.697420@3] hw perfevents: cpumasks 0xf, 0x0
- [ 0.697448@3] hw perfevents: cluster A irq = 17
- [ 0.697534@3] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 0.700426@2] audit: initializing netlink subsys (disabled)
- [ 0.700516@2] audit: type=2000 audit(0.652:1): initialized
- [ 0.701572@1] workingset: timestamp_bits=46 max_order=19 bucket_order=0
- [ 0.712090@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.712927@1] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.713823@2] NFS: Registering the id_resolver key type
- [ 0.713852@2] Key type id_resolver registered
- [ 0.713854@2] Key type id_legacy registered
- [ 0.713865@2] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.714201@2] FS-Cache: Netfs 'cifs' registered for caching
- [ 0.715358@1] SELinux: Registering netfilter hooks
- [ 0.719231@3] NET: Registered protocol family 38
- [ 0.719245@3] Key type asymmetric registered
- [ 0.719249@3] Asymmetric key parser 'x509' registered
- [ 0.719542@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
- [ 0.719551@3] io scheduler noop registered (default)
- [ 0.719554@3] io scheduler deadline registered
- [ 0.719761@3] io scheduler cfq registered
- [ 0.722642@3] random: fast init done
- [ 0.722959@3] random: crng init done
- [ 0.723082@2] [drm] Initialized
- [ 0.723228@2] Unable to detect cache hierarchy for CPU 0
- [ 0.730347@2] loop: module loaded
- [ 0.731997@2] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 0.732618@2] libphy: Fixed MDIO Bus: probed
- [ 0.733652@2] ee eth reset:Addr = ffffff800827d408
- [ 0.733924@3] meson6-dwmac c9410000.ethernet: no reset control found
- [ 0.733931@3] stmmac - user ID: 0x11, Synopsys ID: 0x37
- [ 0.733933@3] Ring mode enabled
- [ 0.733936@3] DMA HW capability register supported
- [ 0.733939@3] Normal descriptors
- [ 0.733940@3] RX Checksum Offload Engine supported
- [ 0.733942@3] COE Type 2
- [ 0.733944@3] TX Checksum insertion supported
- [ 0.733945@3] Wake-Up On Lan supported
- [ 0.734004@3] Enable RX Mitigation via HW Watchdog Timer
- [ 0.737105@1] libphy: stmmac: probed
- [ 0.737115@1] eth%d: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
- [ 0.739375@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.739385@1] ehci-pci: EHCI PCI platform driver
- [ 0.739497@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.739538@1] ohci-pci: OHCI PCI platform driver
- [ 0.740219@1] usbcore: registered new interface driver cdc_acm
- [ 0.740225@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.740299@1] usbcore: registered new interface driver usb-storage
- [ 0.740428@1] usbcore: registered new interface driver usbserial
- [ 0.740483@1] usbcore: registered new interface driver usbserial_generic
- [ 0.740540@1] usbserial: USB Serial support registered for generic
- [ 0.741144@3] mousedev: PS/2 mouse device common for all mice
- [ 0.741665@2] i2c /dev entries driver
- [ 0.742946@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
- [ 0.744737@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
- [ 0.746847@3] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.747528@3] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.747978@2] usbcore: registered new interface driver usbhid
- [ 0.747984@2] usbhid: USB HID core driver
- [ 0.748477@2] c81004c0.serial: clock gate not found
- [ 0.748560@2] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80082d14c0
- [ 0.748610@2] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 20, base_baud = 1500000) is a meson_uart
- [ 0.748627@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 0.817510@2] console [ttyS0] enabled
- [ 0.818164@3] c11084c0.serial: clock gate not found
- [ 0.822360@3] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80082d34c0
- [ 0.822419@3] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 21, base_baud = 10416666) is a meson_uart
- [ 0.823771@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80082d5000
- [ 0.824039@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 0.829052@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80082d9080
- [ 0.831302@1] meson_reset c1104404.reset-controller: can't request region for resource [mem 0xc1104404-0xc1104423]
- [ 0.839285@1] meson_reset: probe of c1104404.reset-controller failed with error -16
- [ 0.840427@1] aml_dma c883e000.aml_dma: Aml dma
- [ 0.842059@1] aml_aes_dma c883e000.aml_dma:aml_aes: Aml AES_dma
- [ 0.842925@2] aml_tdes_dma c883e000.aml_dma:aml_tdes: Aml TDES_dma
- [ 0.843670@2] gpio-keypad gpio_keypad: power key(116) registed.
- [ 0.843847@2] input: gpio_keypad as /devices/platform/gpio_keypad/input/input0
- [ 0.844602@1] efusekeynum: 4
- [ 0.844620@1] efusekeyname: mac offset: 0 size: 6
- [ 0.844630@1] efusekeyname: mac_bt offset: 6 size: 6
- [ 0.844642@1] efusekeyname: mac_wifi offset: 12 size: 6
- [ 0.844652@1] efusekeyname: usid offset: 18 size: 16
- [ 0.845029@3] efuse efuse: probe OK!
- [ 0.847868@3] ion_dev ion_dev: assigned reserved memory node linux,ion-dev
- [ 0.848545@1] ge2d: ge2d_init_module
- [ 0.849406@3] ge2d: ge2d clock is 400 MHZ
- [ 0.849420@3] ge2d: register address resource is not found
- [ 0.849479@3] ge2d: reserved mem is not used
- [ 0.849534@3] ge2d: ge2d start monitor
- [ 0.850126@2] [tsync_pcr_init]init success.
- [ 0.850435@2] amvideom vsync irq: 30
- [ 0.850484@2] create_ge2d_work_queue video task ok
- [ 0.851897@2] amvideocap_probe,amvideocap
- [ 0.853246@2] use cma buf.
- [ 0.856396@1] fb: osd_init_module
- [ 0.856878@1] fb: viu vsync irq: 30
- [ 0.856918@1] 0x000000c3:Y=c3,U=0,V=0
- [ 0.856920@1] 0x000000c4:Y=c4,U=0,V=0
- [ 0.857459@2] fb: osd_rdma_init: rdma_table p=0x74a08000,op=0x74a08000 , v=0xffffff80082dd000
- [ 0.857508@2] rdma_register, rdma_table_addr ffffff80082f1000 rdma_table_addr_phy 74a09000 reg_buf ffffffc05de78000
- [ 0.857512@2] rdma_register success, handle 2 table_size 4096
- [ 0.857514@2] fb: osd_rdma_init:osd reset rdma handle = 2.
- [ 0.857542@2] rdma_register, rdma_table_addr ffffff80082f3000 rdma_table_addr_phy 74a0a000 reg_buf ffffffc05de7e000
- [ 0.857544@2] rdma_register success, handle 3 table_size 4096
- [ 0.857546@2] fb: osd_rdma_init:osd rdma handle = 3.
- [ 0.857563@2] fb: mem_size: 0x800000
- [ 0.857565@2] fb: mem_size: 0x1800000
- [ 0.857566@2] fb: mem_size: 0x100000
- [ 0.857568@2] fb: mem_size: 0x0
- [ 0.857569@2] fb: mem_size: 0x0
- [ 0.857634@2] fb: failed to init reserved memory
- [ 0.859667@0] dil:err:DI_POST_REG_RD:not attach
- [ 0.865033@2] fb: init fbdev bpp is:32
- [ 0.865917@1] fb: set osd0 reverse as NONE
- [ 0.876317@0] dil:err:DI_POST_REG_RD:not attach
- [ 0.876414@1] fb: osd probe OK
- [ 0.876645@1] hdmitx: hdcp: hdmitx_hdcp_init
- [ 0.877526@1] DI: di_module_init ok.
- [ 0.877743@1] DI: di_probe:
- [ 0.877752@1] DI: di_probe: major 511
- [ 0.878101@3] deinterlace deinterlace: assigned reserved memory node linux,di_cma
- [ 0.878111@3] di:flag_cma=1
- [ 0.878115@3] DI: CMA size 0x2000000.
- [ 0.878141@3] pre_irq:44
- [ 0.878149@3] post_irq:45
- [ 0.878151@3] DI: di_probe allocate rdma channel 0.
- [ 0.878165@3] 0x000000c5:Y=c5,U=0,V=0
- [ 0.878167@3] 0x000000c6:Y=c6,U=0,V=0
- [ 0.878169@3] 0x000000c7:Y=c7,U=0,V=0
- [ 0.878171@3] 0x000000c8:Y=c8,U=0,V=0
- [ 0.878173@3] 0x000000c9:Y=c9,U=0,V=0
- [ 0.878175@3] 0x000000ca:Y=ca,U=0,V=0
- [ 0.878177@3] 0x000000cb:Y=cb,U=0,V=0
- [ 0.878179@3] 0x000000cc:Y=cc,U=0,V=0
- [ 0.878181@3] 0x000000cd:Y=cd,U=0,V=0
- [ 0.878183@3] 0x000000ce:Y=ce,U=0,V=0
- [ 0.878188@3] 0x000000cf:Y=cf,U=0,V=0
- [ 0.878190@3] 0x000000d0:Y=d0,U=0,V=0
- [ 0.878192@3] 0x000000d1:Y=d1,U=0,V=0
- [ 0.878193@3] 0x000000d2:Y=d2,U=0,V=0
- [ 0.878195@3] 0x000000d3:Y=d3,U=0,V=0
- [ 0.878197@3] 0x000000d4:Y=d4,U=0,V=0
- [ 0.878201@3] 0x000000d5:Y=d5,U=0,V=0
- [ 0.878203@3] 0x000000d6:Y=d6,U=0,V=0
- [ 0.878205@3] 0x000000d7:Y=d7,U=0,V=0
- [ 0.878207@3] 0x000000d8:Y=d8,U=0,V=0
- [ 0.878209@3] 0x000000d9:Y=d9,U=0,V=0
- [ 0.878211@3] 0x000000da:Y=da,U=0,V=0
- [ 0.878213@3] 0x000000db:Y=db,U=0,V=0
- [ 0.878215@3] 0x000000dc:Y=dc,U=0,V=0
- [ 0.878217@3] 0x000000dd:Y=dd,U=0,V=0
- [ 0.878220@3] DI: support multi decoding 219~220~221.
- [ 0.878379@3] DI: di_probe:Di use HRTIMER
- [ 0.878565@2] DI: di_probe:ok
- [ 0.878718@2] dim:dim_module_init
- [ 0.879099@2] dim:dim_module_init finish
- [ 0.879105@2] dil:dil_init.
- [ 0.879339@2] dil:dil_init ok.
- [ 0.879405@2] vdin_drv_init: major 510
- [ 0.879832@2] rdma_register, rdma_table_addr ffffff80082f7000 rdma_table_addr_phy 74a0b000 reg_buf ffffffc0414e3200
- [ 0.879838@2] rdma_register success, handle 4 table_size 512
- [ 0.879841@2] vdin_drv_probe:vdin.0 rdma hanld 4.
- [ 0.880151@3]
- [ 0.880151@3] vdin memory resource undefined!!
- [ 0.880159@3] vdin0 cma_mem_size = 16 MB
- [ 0.880166@3] vdin0 irq: 46 rdma irq: 2
- [ 0.880173@3] set_canvas_manual = 0
- [ 0.880204@3] get fclk_div5 err
- [ 0.880254@3] vdin_drv_probe: vdin cannot get msr clk !!!
- [ 0.883771@3] vdin_drv_probe: driver initialized ok
- [ 0.883986@3] rdma_register, rdma_table_addr ffffff80082f9000 rdma_table_addr_phy 74a0c000 reg_buf ffffffc041459800
- [ 0.883991@3] rdma_register success, handle 5 table_size 512
- [ 0.883993@3] vdin_drv_probe:vdin.1 rdma hanld 5.
- [ 0.884334@1] vdin vdin1: assigned reserved memory node linux,vdin1_cma
- [ 0.884340@1]
- [ 0.884340@1] vdin memory resource done.
- [ 0.884345@1] vdin1 cma_mem_size = 16 MB
- [ 0.884351@1] vdin1 irq: 47 rdma irq: 4
- [ 0.884354@1] set_canvas_manual = 0
- [ 0.884391@1] get fclk_div5 err
- [ 0.886841@1] vdin_drv_probe: vdin cannot get msr clk !!!
- [ 0.892210@1] vdin_debugfs_init only support debug vdin0 1
- [ 0.892212@1] vdin_drv_probe: driver initialized ok
- [ 0.892317@1] vdin_drv_init: vdin driver init done
- [ 0.892323@1] [viuin..]viuin_init_module viuin module init
- [ 0.892755@1] [viuin..]viuin_probe probe ok.
- [ 0.893449@1] [RX]-hdmirx: hdmirx_init.
- [ 0.893458@1] ESM HLD: Initializing...
- [ 0.894603@3] PPMGRDRV: warn: ppmgr module init func called
- [ 0.894863@3] PPMGRDRV: info: ppmgr_driver_probe called
- [ 0.894936@3] Reserved memory: failed to init DMA memory pool at 0x0000000076000000, size 0 MiB
- [ 0.900853@3] PPMGRDRV: info: ppmgr_dev major:508
- [ 0.901676@1] aml_vecm_init:module init
- [ 0.901949@1] VECM probe start
- [ 0.902417@2] vlock_status_init vlock_en:1
- [ 0.902451@2] aml_vecm_probe: ok
- [ 0.902534@2] amdolby_vision_init:module init
- [ 0.903546@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
- [ 0.904594@1] meson-mmc: >>>>>>>>hostbase ffffff8008422000, dmode
- [ 0.945748@0] clear:59c00000, free:59c00000, tick:315787 us
- [ 0.950682@1] meson-mmc: meson_mmc_probe() : success!
- [ 0.961833@1] meson-mmc: >>>>>>>>hostbase ffffff800842c000, dmode
- [ 0.962422@1] meson-mmc: gpio_cd = 1c1
- [ 0.998673@1] meson-mmc: meson_mmc_probe() : success!
- [ 1.000812@1] meson-mmc: >>>>>>>>hostbase ffffff8008436000, dmode
- [ 1.003255@1] meson-mmc: emmc: trying cali 0-th time(s)
- [ 1.014188@1] meson-mmc: emmc: delay[0]= 2600 padding= 2, bidx=2
- [ 1.014191@1] meson-mmc: emmc: delay[1]= 3200 padding= 4, bidx=3
- [ 1.014194@1] meson-mmc: emmc: delay[2]= 2800 padding= 1, bidx=2
- [ 1.014197@1] meson-mmc: emmc: delay[3]= 3400 padding= 3, bidx=3
- [ 1.014199@1] meson-mmc: emmc: delay[4]= 3400 padding= 3, bidx=3
- [ 1.014201@1] meson-mmc: emmc: delay[5]= 2800 padding= 1, bidx=2
- [ 1.014203@1] meson-mmc: emmc: delay[6]= 3200 padding= 4, bidx=3
- [ 1.014206@1] meson-mmc: emmc: delay[7]= 3000 padding= 5, bidx=3
- [ 1.014209@1] meson-mmc: emmc: calibration result : max(3400), min(2600)
- [ 1.014212@1] meson-mmc: emmc: line_delay =0x21300314, max_cal_result =3400
- [ 1.014213@1] meson-mmc: calibration @0 times ok
- [ 1.014221@1] meson-mmc: emmc: base_index_max 3, base_index_min 2
- [ 1.014223@1] meson-mmc: Data 1 aligned delay is 1
- [ 1.014227@1] meson-mmc: emmc: clk 100000000 SDR mode tuning start
- [ 1.024776@1] meson-mmc: emmc: adj_win: < 0 1 2 3 4 5 6 7 8 9 >
- [ 1.024779@1] meson-mmc: aml_sd_emmc_execute_tuning_(), window is not sharp
- [ 1.024782@1] meson-mmc: emmc: clk 100000000 SDR mode tuning start
- [ 1.035289@1] meson-mmc: emmc: adj_win: < 0 1 2 3 4 5 6 7 8 9 >
- [ 1.035292@1] meson-mmc: aml_sd_emmc_execute_tuning_(), window is not sharp
- [ 1.035295@1] meson-mmc: emmc: clk 100000000 SDR mode tuning start
- [ 1.038659@1] meson-mmc: meson_mmc_probe() : success!
- [ 1.038961@1] amlogic mtd driver init
- [ 1.039615@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
- [ 1.039773@1] input: aml_vkeypad as /devices/platform/rtc/input/input1
- [ 1.040649@1] cectx c810023c.aocec: cec driver date:2020/03/16:reduece no msg in sleep time
- [ 1.040649@1]
- [ 1.045272@1] cectx c810023c.aocec: compatible:amlogic, amlogic-aocec
- [ 1.051410@1] cectx c810023c.aocec: cecb_ver:0x0
- [ 1.055995@1] cectx c810023c.aocec: line_reg:0x0
- [ 1.060568@1] cectx c810023c.aocec: line_bit:0x8
- [ 1.065135@2] cectx c810023c.aocec: ee_to_ao:0x0
- [ 1.069902@2] input: cec_input as /devices/virtual/input/input2
- [ 1.070072@2] cectx c810023c.aocec: not find 'port_num'
- [ 1.072535@1] meson-mmc: emmc: adj_win: < 0 1 2 3 4 5 6 7 8 9 >
- [ 1.072538@1] meson-mmc: aml_sd_emmc_execute_tuning_(), window is not sharp
- [ 1.072542@1] meson-mmc: emmc: clk 100000000 SDR mode tuning start
- [ 1.074875@2] cectx c810023c.aocec: using cec:0
- [ 1.079348@2] cectx c810023c.aocec: get sleep state error!
- [ 1.082131@1] meson-mmc: emmc: adj_win: < 0 1 2 3 4 5 6 7 9 >
- [ 1.082134@1] meson-mmc: emmc: best_win_start =9, best_win_size =9
- [ 1.082137@1] meson-mmc: emmc: clock=0x100024a, adjust=0x32000
- [ 1.082141@1] meson-mmc: emmc: clock =0x100024a, delay=0x21300314, adjust=0x32000
- [ 1.082206@1] emmc: new HS200 MMC card at address 0001
- [ 1.082873@1] emmc: clock 100000000, 8-bit-bus-width
- [ 1.082873@1]
- [ 1.082874@1] mmcblk0: emmc:0001 032G94 29.1 GiB
- [ 1.083051@1] mmcblk0boot0: emmc:0001 032G94 partition 1 4.00 MiB
- [ 1.083201@1] mmcblk0boot1: emmc:0001 032G94 partition 2 4.00 MiB
- [ 1.084820@2] cectx c810023c.aocec: no hdmirx regs
- [ 1.087409@1] mmcblk0rpmb: emmc:0001 032G94 partition 3 512 KiB
- [ 1.088912@1] meson-mmc: Enter aml_emmc_partition_ops
- [ 1.089258@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
- [ 1.089259@1] meson-mmc: add_emmc_partition
- [ 1.089495@1] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 1.089555@2] cectx c810023c.aocec: no hhi regs
- [ 1.089655@1] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 1.089834@1] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 1.089989@1] meson-mmc: [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
- [ 1.090125@1] meson-mmc: [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
- [ 1.090284@1] meson-mmc: [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 1.090427@1] meson-mmc: [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 1.090562@1] meson-mmc: [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 1.090782@1] meson-mmc: [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 1.090920@1] meson-mmc: [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 1.091068@1] meson-mmc: [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
- [ 1.091210@1] meson-mmc: [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
- [ 1.091355@1] meson-mmc: [mmcblk0p13] system offset 0x000057400000, size 0x000080000000
- [ 1.091500@1] meson-mmc: [mmcblk0p14] data offset 0x0000d7c00000, size 0x000670000000
- [ 1.091526@1] card key: card_blk_probe.
- [ 1.091531@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
- [ 1.091534@1] emmc key: emmc_key_init:205 ok.
- [ 1.094030@2] meson-mmc: amlmmc_dtb_init: register dtb chardev
- [ 1.094031@2] cectx c810023c.aocec: no periphs regs
- [ 1.095074@1] meson-mmc: calc a7094954, store 6964202d
- [ 1.095075@1] meson-mmc: cpy 1 is not valid
- [ 1.098455@1] meson-mmc: calc c7b7f47, store 91104021
- [ 1.098457@1] meson-mmc: cpy 0 is not valid
- [ 1.098458@1] meson-mmc: total valid 0
- [ 1.098815@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
- [ 1.099045@1] meson-mmc: amlmmc_ddr_init: register ddr_parameter chardev
- [ 1.099093@1] meson-mmc: amlmmc_ddr_init: register ddr parameter chardev OK
- [ 1.099093@1] meson-mmc: Exit aml_emmc_partition_ops OK.
- [ 1.107130@2] cectx c810023c.aocec: not find 'output'
- [ 1.115240@2] irq cnt:1, a:39, b39
- [ 1.115881@0] cectx c810023c.aocec: wakeup_reason:0x0
- [ 1.117166@0] cectx c810023c.aocec: cev val1: 0x0;val2: 0x0
- [ 1.122717@0] cectx c810023c.aocec: aml_cec_probe success end
- [ 1.129128@0] unifykey: no efuse-version set, use default value: -1
- [ 1.129463@0] unifykey: aml_unifykeys_init done!
- [ 1.129724@0] audio_dsp: [dsp]register dsp to char divece(257)
- [ 1.129918@0] amaudio: amaudio: driver amaudio init!
- [ 1.130304@0] amaudio: amaudio_init - amaudio: driver amaudio succuess!
- [ 1.130794@0] hdmitx: system: plugin
- [ 1.131149@0] sysled: module init
- [ 1.131495@0] meson_wdt c11098d0.watchdog: start watchdog
- [ 1.131500@0] meson_wdt c11098d0.watchdog: creat work queue for watch dog
- [ 1.131771@0] meson_wdt c11098d0.watchdog: AML Watchdog Timer probed done
- [ 1.132435@0] amlogic rfkill init
- [ 1.132580@0] enter bt_probe of_node
- [ 1.132604@0] not get gpio_en
- [ 1.132606@0] not get gpio_hostwake
- [ 1.132608@0] not get gpio_btwakeup
- [ 1.132610@0] power on valid level is high
- [ 1.132613@0] bt: power_on_pin_OD = 0;
- [ 1.132615@0] bt: power_off_flag = 1;
- [ 1.132616@0] dis power down = 0;
- [ 1.158788@0] request_irq error ret=-22
- [ 1.158854@0] dev_pm_set_wake_irq failed: -22
- [ 1.163556@0] dmc_monitor_probe
- [ 1.164110@0] defendkey c8834500.defendkey: Reserved memory is not enough!
- [ 1.168203@0] defendkey: probe of c8834500.defendkey failed with error -22
- [ 1.168815@0] bl301_manager: driver init
- [ 1.168819@0] bl301_manager: IR remote wake-up code: 0xffffffff
- [ 1.168821@0] bl301_manager: IR remote wake-up code mask: 0xffffffff
- [ 1.168823@0] bl301_manager: IR remote wake-up code protocol: 0x0
- [ 1.168825@0] bl301_manager: enable 5V system power on suspend/power off state: 0
- [ 1.169414@0] usbcore: registered new interface driver snd-usb-audio
- [ 1.170737@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 1.170760@0] T9015 acodec used by meson, tdmout:0
- [ 1.171994@0] snd_i2s_dai: clock source gate top_glue : ffffffc041670700
- [ 1.172023@0] snd_i2s_dai: clock source gate aud_buf : ffffffc041670780
- [ 1.172050@0] snd_i2s_dai: clock source gate i2s_out : ffffffc041670800
- [ 1.172080@0] snd_i2s_dai: clock source gate amclk_measure : ffffffc041670880
- [ 1.172115@0] snd_i2s_dai: clock source gate aififo2 : ffffffc041670900
- [ 1.172154@0] snd_i2s_dai: clock source gate aud_mixer : ffffffc041670980
- [ 1.172197@0] snd_i2s_dai: clock source gate mixer_reg : ffffffc041670a00
- [ 1.172244@0] snd_i2s_dai: clock source gate adc : ffffffc041670a80
- [ 1.172352@0] snd_i2s_dai: clock source gate top_level : ffffffc041670b00
- [ 1.172408@0] snd_i2s_dai: clock source gate aoclk : ffffffc041670b80
- [ 1.172467@0] snd_i2s_dai: clock source gate aud_in : ffffffc041670c00
- [ 1.172473@0] snd_i2s_dai: ignore aud_buf/vdac_clk gate
- [ 1.172681@0] aml-i2s-dai I2S: I2S Mic is in platform!
- [ 1.173326@0] snd_pcm_dai: pcm mode detection =1
- [ 1.173553@0] snd_pcm_dai: tdm config: 0x1, 0x1, 2, 16
- [ 1.173991@0] snd_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
- [ 1.174147@0] snd_spdif_dai: set normal 512 fs /4 fs
- [ 1.174149@0] snd_spdif_dai: set 958 audio clk div 4
- [ 1.174159@0] hdmitx: audio: aout notify format CT_PCM
- [ 1.174162@0] hdmitx: hw: set audio
- [ 1.174174@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
- [ 1.174197@0] hdmitx: fs = 3, cd = 4, tmds_clk = 0
- [ 1.174199@0] hdmitx: hw: aud_n_para = 6144
- [ 1.174215@0] hdmitx: hw: set channel status
- [ 1.174267@0] hdmitx: audio: Audio Type: PCM
- [ 1.174270@0] hdmitx: audio: set audio param
- [ 1.174934@0] spdif-dit spdif_codec: audio_spdif_out_mute can't get pinctrl
- [ 1.176463@0] spdif-dit spdif_codec: audio_spdif_in_mute can't get pinctrl
- [ 1.183130@0] spdif-dit spdif_codec: audio_spdif_in can't get pinctrl
- [ 1.190061@0] snd_card_meson: aml_card_dai_parse_of codec_node count:1
- [ 1.190148@0] snd_card_meson: aml_card_dai_parse_of codec_node count:1
- [ 1.190254@0] snd_card_meson: aml_card_dai_parse_of codec_node count:1
- [ 1.191660@0] snd_card_meson: headphone detection disable=1
- [ 1.191667@0] snd_card_meson: no spk event delay time set
- [ 1.192381@0] aml_meson_snd_card aml_sound_meson: T9015-audio-hifi <-> I2S mapping ok
- [ 1.192934@0] aml_meson_snd_card aml_sound_meson: dit-hifi <-> SPDIF mapping ok
- [ 1.193164@0] snd_pcm: enter aml_pcm_new dai->name: PCM dai->id: 0
- [ 1.193608@0] aml_meson_snd_card aml_sound_meson: pcm2bt-pcm <-> PCM mapping ok
- [ 1.193634@0] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTL
- [ 1.197530@0] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 1.202743@1] meson-mmc: card IN
- [ 1.210039@0] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTR
- [ 1.217953@0] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 1.227386@0] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Playback debugfs file
- [ 1.227391@0] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Capture debugfs file
- [ 1.228664@2] snd_card_meson: enable i2sclk in startup
- [ 1.232740@0] Register vad
- [ 1.233759@0] NET: Registered protocol family 10
- [ 1.234619@0] NET: Registered protocol family 17
- [ 1.234709@0] Key type dns_resolver registered
- [ 1.236320@0] Registered swp emulation handler
- [ 1.236332@0] Registered cp15_barrier emulation handler
- [ 1.236339@0] Registered setend emulation handler
- [ 1.236381@0] disable EAS feature
- [ 1.237044@2] registered taskstats version 1
- [ 1.243275@0] dwc3 c9000000.dwc3: Configuration mismatch. dr_mode forced to host
- [ 1.247714@0] hdmitx: edid: EDID Parser:
- [ 1.247736@0] [RX]-up_phy_addr = 2
- [ 1.247749@0] hdmitx: Edid_ParsingVendSpec:ieeeoui=0x90848b,len=5
- [ 1.247751@0] hdmitx: Edid_ParsingVendSpec:ieeeoui=0x90848b,len=5
- [ 1.247756@0] hdmitx: edid: change preferred_mode from 0 to 97
- [ 1.247758@0] hdmitx: hdmitx: get PMT vic: 97
- [ 1.247761@0] hdmitx: edid: find IEEEOUT
- [ 1.247802@0] hdmitx: edid: blk0 raw data
- [ 1.247833@0] hdmitx: edid:
- [ 1.247833@0] 00ffffffffffff004c2d0b0f000e0001011c0103808e50780a23ada4544d9926
- [ 1.247833@0] 0f474abdef80714f81c0810081809500a9c0b300d1c008e80030f2705a80b058
- [ 1.247833@0] 8a00501d7400001e662156aa51001e30468f3300501d7400001e000000fd0018
- [ 1.247833@0] 780fb93c000a202020202020000000fc0053414d53554e470a202020202001c4
- [ 1.247833@0]
- [ 1.247833@0]
- [ 1.247835@0] hdmitx: edid: blk1 raw data
- [ 1.247865@0] hdmitx: edid:
- [ 1.247865@0] 020359f05961101f041305142021225d5e5f606566626364071603123f402909
- [ 1.247865@0] 070715075057070183010000e2004fe305c3016e030c002000b83c2800800102
- [ 1.247865@0] 030468d85dc40178800302e3060d01e30f01e0e5018b8490016fc200a0a0a055
- [ 1.247865@0] 5030203500501d7400001a000000000000000000000000000000000000000083
- [ 1.247865@0]
- [ 1.247865@0]
- [ 1.247868@0] hdmitx: system: update physcial size: 1420 800
- [ 1.257442@0] hdmitx: system: get current mode: 1080p60hz
- [ 1.257445@0] hdmitx: system: update physcial size: 1420 800
- [ 1.257484@0] hdmitx: video: already init VIC = 0 Now VIC = 16
- [ 1.257488@0] hdmitx: hw: div40: 0
- [ 1.284692@0] hdmitx: frac_rate = 0
- [ 1.284697@0] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 0
- [ 1.284701@0] hdmitx: config HPLL = 5940000 frac_rate = 0
- [ 1.284757@0] hdmitx: HPLL: 0xc000027b
- [ 1.284758@0] hdmitx: config HPLL done
- [ 1.284764@0] hdmitx: set_hpll_od3_clk_div[643] div = 6
- [ 1.284769@0] hdmitx: j = 4 vid_clk_div = 1
- [ 1.284779@0] hdmitx: set enc for VIC: 16
- [ 1.306938@1] meson-mmc: normal card in
- [ 1.326665@0] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
- [ 1.336847@0] hdmitx: video: Sink is HDMI device
- [ 1.336973@0] hdmitx: hw: set audio
- [ 1.336983@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
- [ 1.337006@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
- [ 1.337009@0] hdmitx: hw: aud_n_para = 6144
- [ 1.337025@0] hdmitx: hw: set channel status
- [ 1.337077@0] hdmitx: audio: Audio Type: PCM
- [ 1.337080@0] hdmitx: system: update rx hdr info d
- [ 1.337082@0] hdmitx: hw: set audio
- [ 1.337084@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
- [ 1.337106@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
- [ 1.337108@0] hdmitx: hw: aud_n_para = 6144
- [ 1.337123@0] hdmitx: hw: set channel status
- [ 1.337174@0] hdmitx: audio: Audio Type: PCM
- [ 1.353560@0] hdmitx: hdmitx_set_drm_pkt: tf=1, cf=1, colormetry=0
- [ 1.494527@1] sd: new high speed SDHC card at address 59b4
- [ 1.494533@1] sd: clock 50000000, 4-bit-bus-width
- [ 1.494533@1]
- [ 1.499022@1] mmcblk1: sd:59b4 USDU1 14.6 GiB
- [ 1.499966@1] mmcblk1: p1 p2
- [ 1.747804@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.747826@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 1.748187@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x02010010
- [ 1.748226@3] xhci-hcd xhci-hcd.0.auto: irq 36, io mem 0xc9000000
- [ 1.748365@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.748370@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.748373@3] usb usb1: Product: xHCI Host Controller
- [ 1.748402@3] usb usb1: Manufacturer: Linux 4.9.113 xhci-hcd
- [ 1.748406@3] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 1.748963@0] hub 1-0:1.0: USB hub found
- [ 1.748995@0] hub 1-0:1.0: 2 ports detected
- [ 1.749280@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.749292@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 1.749362@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.749441@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.749445@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.749448@0] usb usb2: Product: xHCI Host Controller
- [ 1.749452@0] usb usb2: Manufacturer: Linux 4.9.113 xhci-hcd
- [ 1.749455@0] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 1.749944@1] hub 2-0:1.0: USB hub found
- [ 1.749971@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 1.751717@1] usb usb2: Unsupported the hub
- [ 1.756157@1] aml_vrtc rtc: setting system clock to 2017-01-01 00:00:04 UTC (1483228804)
- [ 1.756511@1] dwc_otg c9100000.dwc2_a: dwc_otg_driver_probe(ffffffc05ddb2800)
- [ 1.756541@1] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
- [ 1.756547@1] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 1.758178@0] cpucore_cooling_register, max_cpu_core_num:4
- [ 1.763828@0] gxbb_pm: enter meson_pm_probe!
- [ 1.763844@0] gxbb_pm: system suspend level: 1
- [ 1.763849@0] no vddio3v3_en pin
- [ 1.763862@0] pm-meson aml_pm: Can't get switch_clk81
- [ 1.763923@0] gxbb_pm: meson_pm_probe done
- [ 1.764256@0] ALSA device list:
- [ 1.764259@0] #0: AML-MESONAUDIO
- [ 1.765881@0] Freeing unused kernel memory: 4864K
- [ 1.810050@2] vout: vmode set to null
- [ 1.810107@2] fb: current vmode=1080p60hz, cmd: 0x10000
- [ 1.810112@2] vlock: event MODE_CHANGE_PRE 0
- [ 1.810168@2] vout: new mode null set ok
- [ 1.810171@2] DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE
- [ 1.810173@2] fb: current vmode=null, cmd: 0x20000
- [ 1.810317@2] hdmitx: system: set frac_rate_policy as 0
- [ 1.810374@2] vout: vmode set to 1080p60hz
- [ 1.810415@2] fb: current vmode=null, cmd: 0x10000
- [ 1.810421@2] hdmitx: hdmitx_set_current_vmode[4794]
- [ 1.810424@2] hdmitx: system: recalc before 1080p60hz 60 1
- [ 1.810427@2] hdmitx: system: recalc after 1080p60hz 60 1
- [ 1.810438@2] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0x0abad800 (VIC: 16)
- [ 1.810439@2] hdmitx: system: get current mode: 1080p60hz
- [ 1.810441@2] hdmitx: system: update physcial size: 1420 800
- [ 1.810453@2] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0x0abad800 (VIC: 16)
- [ 1.810486@2] hdmitx: video: already init VIC = 0 Now VIC = 16
- [ 1.810490@2] hdmitx: hw: div40: 0
- [ 1.836712@0] hdmitx: frac_rate = 0
- [ 1.836716@0] hdmitx: hdmitx: set clk: VIC = 16 cd = 5 cs = 2 frac_rate = 0
- [ 1.836721@0] hdmitx: config HPLL = 3712500 frac_rate = 0
- [ 1.836776@0] hdmitx: HPLL: 0xc000029a
- [ 1.836777@0] hdmitx: config HPLL done
- [ 1.836782@0] hdmitx: set_hpll_od3_clk_div[643] div = 8
- [ 1.836787@0] hdmitx: j = 4 vid_clk_div = 1
- [ 1.836798@0] hdmitx: set enc for VIC: 16
- [ 1.836815@0] hdmitx: system: irq 80000001 0
- [ 1.878667@0] hdmitx: hw: config hdmitx IP vic = 16 cd:5 cs: 2
- [ 1.888849@0] hdmitx: video: Sink is HDMI device
- [ 1.889014@0] hdmitx: hw: set audio
- [ 1.889025@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
- [ 1.889049@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
- [ 1.889051@0] hdmitx: hw: aud_n_para = 6144
- [ 1.889067@0] hdmitx: hw: set channel status
- [ 1.889118@0] hdmitx: audio: Audio Type: PCM
- [ 1.889122@0] hdmitx: system: update rx hdr info d
- [ 1.889126@0] vout: new mode 1080p60hz set ok
- [ 1.889129@0] DOLBY: vout_notify_callback: VOUT_EVENT_MODE_CHANGE
- [ 1.889132@0] fb: current vmode=1080p60hz, cmd: 0x20000
- [ 1.889140@0] fb: outputmode changed to 1080p60hz, reset osd0, (0, 0, 0, 0) -> (0, 0, 1919, 1079)
- [ 1.922257@0] fb: osd[0] enable: 1 (sh)
- [ 1.938668@0] hdmitx: [0x10000104]: 0x00000001
- [ 1.938678@0] hdmitx: [0x10000180]: 0x000000ff
- [ 1.938681@0] hdmitx: [0x10000181]: 0x000000ff
- [ 1.938684@0] hdmitx: [0x10000182]: 0x00000003
- [ 1.938686@0] hdmitx: [0x10000183]: 0x00000007
- [ 1.938689@0] hdmitx: [0x10000184]: 0x0000003f
- [ 1.938693@0] hdmitx: [0x10000185]: 0x00000002
- [ 1.938697@0] hdmitx: [0x10000187]: 0x000000ff
- [ 1.938699@0] hdmitx: [0x10000188]: 0x00000003
- [ 1.938919@0] vlock: event MODE_CHANGE
- [ 1.940980@1] fb: malloc_osd_memory, cma:ffffff800ad289a8
- [ 1.940989@1] fb: malloc_osd_memory, 1218, base:0x0000000074800000, size:8388608
- [ 1.941020@1] fb: use ion buffer for fb memory, fb_index=0
- [ 1.947919@1] meson-fb meson-fb: create ion_client ffffffc05d4826c0, handle=ffffffc0416480c0
- [ 1.947928@1] meson-fb meson-fb: ion memory(0): created fb at 0x0000000078000000, size 24 MiB
- [ 1.947930@1] fb: Frame buffer memory assigned at
- [ 1.947934@1] fb: 0, phy: 0x0000000078000000, vir:0xffffff800ba02000, size=24576K
- [ 1.947934@1]
- [ 1.947937@1] fb: logo_index=0,fb_index=0
- [ 1.947983@1] fb: osd[0] canvas.idx =0x40
- [ 1.947985@1] fb: osd[0] canvas.addr=0x78000000
- [ 1.947986@1] fb: osd[0] canvas.width=7680
- [ 1.947987@1] fb: osd[0] canvas.height=3240
- [ 1.947989@1] fb: osd[0] frame.width=1920
- [ 1.947990@1] fb: osd[0] frame.height=1080
- [ 1.947991@1] fb: osd[0] out_addr_id =0x0
- [ 1.955937@0] fb: osd_release now.index=0,open_count=1
- [ 1.957927@2] fb: malloc_osd_memory, cma:ffffff800ad289a8
- [ 1.957937@2] fb: malloc_osd_memory, 1218, base:0x0000000074800000, size:8388608
- [ 1.957940@2] fb: use ion buffer for fb memory, fb_index=1
- [ 1.958477@2] meson-fb meson-fb: create ion_client ffffffc05d4826c0, handle=ffffffc05dc5f9c0
- [ 1.958484@2] meson-fb meson-fb: ion memory(1): created fb at 0x0000000079800000, size 1 MiB
- [ 1.958486@2] fb: Frame buffer memory assigned at
- [ 1.958489@2] fb: 1, phy: 0x0000000079800000, vir:0xffffff800d203000, size=1024K
- [ 1.958489@2]
- [ 1.958492@2] fb: logo_index=0,fb_index=1
- [ 1.958495@2] fb: ---------------clear fb1 memory ffffff800d203000
- [ 1.958999@2] fb: osd[1] canvas.idx =0x43
- [ 1.959003@2] fb: osd[1] canvas.addr=0x79800000
- [ 1.959005@2] fb: osd[1] canvas.width=128
- [ 1.959007@2] fb: osd[1] canvas.height=32
- [ 1.959009@2] fb: osd[1] frame.width=32
- [ 1.959010@2] fb: osd[1] frame.height=32
- [ 1.959012@2] fb: osd[1] out_addr_id =0x0
- [ 1.972610@0] fb: osd_release now.index=1,open_count=1
- [ 1.989238@0] VID: VD1 off
- [ 1.989395@0] fb: osd[0] enable: 1 (sh)
- [ 2.005797@0] fb: osd[1] enable: 0 (sh)
- [ 2.055660@0] Console: switching to colour frame buffer device 240x67
- [ 2.078731@0] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 2.082024@0] Checking disk(s): LABEL=COREELEC LABEL=STORAGE
- [ 2.154713@0] vout: aml_tvout_mode_work: monitor stop
- [ 2.223496@0] usb 1-1: New USB device found, idVendor=0bda, idProduct=8153
- [ 2.223520@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
- [ 2.223524@0] usb 1-1: Product: USB 10/100/1000 LAN
- [ 2.223527@0] usb 1-1: Manufacturer: Realtek
- [ 2.223530@0] usb 1-1: SerialNumber: 000001
- [ 2.229781@0] usb 1-1: Unsupported device
- [ 2.229969@0] usb 1-1: Unsupported device
- [ 2.350706@0] usb 1-2: new full-speed USB device number 3 using xhci-hcd
- [ 2.492837@0] usb 1-2: New USB device found, idVendor=046d, idProduct=c52f
- [ 2.492844@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.492848@0] usb 1-2: Product: USB Receiver
- [ 2.492851@0] usb 1-2: Manufacturer: Logitech
- [ 2.500638@0] input: Logitech USB Receiver as /devices/platform/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:046D:C52F.0001/input/input3
- [ 2.501216@0] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-2/input0
- [ 2.504287@0] input: Logitech USB Receiver as /devices/platform/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.1/0003:046D:C52F.0002/input/input4
- [ 2.563336@0] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-2/input1
- [ 2.747994@2] fsck: CP437: Invalid argument
- [ 2.748109@2] fsck: fsck.fat 4.1 (2017-01-24)
- [ 2.748263@2] fsck: /dev/mmcblk1p1: 75 files, 27354/65501 clusters
- [ 2.748442@2] fsck: STORAGE: clean, 698/3696640 files, 476696/14781440 blocks
- [ 3.255457@1] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
- [ 3.256066@1] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
- [ 3.293060@1] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.655636@0] vpu: switch_vpu_mem_pd: unsupport vpu mod: 12
- [ 3.710701@2] lcd vlock_en=1, vlock_mode=0x4
- [ 3.734709@2] systemd[1]: System time before build time, advancing clock.
- [ 3.738864@2] cgroup: cgroup2: unknown option "nsdelegate"
- [ 3.745427@2] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
- [ 3.746054@2] systemd[1]: Detected architecture arm64.
- [ 3.750777@2] systemd[1]: Set hostname to <CoreELEC>.
- [ 3.802631@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 3.802683@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 3.908456@2] systemd[1]: Listening on udev Control Socket.
- [ 3.913039@2] systemd[1]: Starting Show Version...
- [ 3.916209@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 3.916401@2] systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY.
- [ 3.917088@2] systemd[1]: Listening on udev Kernel Socket.
- [ 3.919004@1] systemd[1]: Created slice User and Session Slice.
- [ 4.075941@2] kernel-overlays-setup: setup base modules
- [ 4.166411@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.113
- [ 4.224850@2] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
- [ 4.225017@2] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
- [ 4.226151@1] kernel-overlays-setup: done
- [ 4.393334@0] media: Linux media interface: v0.10
- [ 4.422376@0] Linux video capture interface: v2.00
- [ 4.455228@2] amlvid:info: amlvideo_init called
- [ 4.455233@2] amlvid:info: amlvideo_create_instance called
- [ 4.455243@2] amlvid:info: v4l2_dev.name=:amlvideo-000
- [ 4.455472@2] amlvideo-000: V4L2 device registered as video10
- [ 4.455477@2] amlvid:info: amlvideo_create_instance called
- [ 4.455481@2] amlvid:info: v4l2_dev.name=:amlvideo-001
- [ 4.455703@2] amlvideo-001: V4L2 device registered as video23
- [ 4.468927@2] media_clock: loading out-of-tree module taints kernel.
- [ 4.470360@2] register clk_set_setting cpu[33]
- [ 4.471915@2] Registered firmware driver success.
- [ 4.472695@2] Try to load video/h264_enc.bin ...
- [ 4.472746@2] load firmware size : 76288, Name : video/h264_enc.bin.
- [ 4.473458@2] Try to load video/video_ucode.bin ...
- [ 4.474300@2] load firmware size : 1459200, Name : video/video_ucode.bin.
- [ 4.509974@1] Amlogic A/V streaming port init
- [ 4.513651@1] get gate demux control ok ffffffc04b632ec0
- [ 4.513672@1] get gate parser_top control ok ffffffc05dea7f80
- [ 4.513691@1] get gate vdec control ok ffffffc05dea7740
- [ 4.513715@1] get gate clk_81 control ok ffffffc05d6013c0
- [ 4.513743@1] get gate clk_vdec_mux control ok ffffffc05d601800
- [ 4.513773@1] get gate clk_hcodec_mux control ok ffffffc05d6012c0
- [ 4.513808@1] get gate clk_hevc_mux control ok ffffffc05d6014c0
- [ 4.513824@1] get gate clk_hevcb_mux control failed (null)
- [ 4.513828@1] get gate ahbarb0 control failed (null)
- [ 4.513832@1] get gate asyncfifo control failed (null)
- [ 4.536411@0] amvdec_avs module init
- [ 4.548550@0] amvdec_h264 module init
- [ 4.556911@0] amvdec_h265 module init
- [ 4.572295@0] ammvdec_h264 module init
- [ 4.579011@0] ammvdec_mpeg12 module init
- [ 4.581565@0] ammvdec_mpeg4_driver_init_module
- [ 4.599753@0] systemd-journald[2316]: Received request to flush runtime journal from PID 1
- [ 4.608997@0] decoder registered as /dev/video26
- [ 4.613274@0] amvdec_vc1 module init
- [ 4.621024@0] amvdec_vp9 module init
- [ 4.641112@1] Triggered SDIO WiFi power on and bus rescan.
- [ 4.641136@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 486
- [ 4.970743@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 486
- [ 5.292112@0] meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 5.292120@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
- [ 5.292148@3] meson-mmc: meson_mmc_irq_thread 2779 sdio: cmd:52
- [ 5.293203@0] meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 5.293208@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
- [ 5.293228@3] meson-mmc: meson_mmc_irq_thread 2779 sdio: cmd:52
- [ 5.297841@0] meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
- [ 5.297846@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
- [ 5.297875@3] meson-mmc: meson_mmc_irq_thread 2779 sdio: cmd:8
- [ 5.348499@1] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
- [ 5.361406@1] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
- [ 5.366953@1] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
- [ 5.368052@1] sdio: queuing unknown CIS tuple 0x14 (0 bytes)
- [ 5.371219@1] meson-mmc: Data 1 aligned delay is 0
- [ 5.371228@1] meson-mmc: sdio: clk 200000000 SDR mode tuning start
- [ 5.374207@1] meson-mmc: sdio: adj_win: < 1 2 3 4 >
- [ 5.374213@1] meson-mmc: sdio: best_win_start =1, best_win_size =4
- [ 5.374217@1] meson-mmc: sdio: clock=0x1000245, adjust=0x32000
- [ 5.374220@1] meson-mmc: sdio: clock =0x1000245, delay=0x0, adjust=0x32000
- [ 5.375288@1] sdio: queuing unknown CIS tuple 0x80 (1 bytes)
- [ 5.375346@1] sdio: queuing unknown CIS tuple 0x81 (1 bytes)
- [ 5.375397@1] sdio: queuing unknown CIS tuple 0x82 (1 bytes)
- [ 5.375425@1] sdio: new ultra high speed SDR104 SDIO card at address 0001
- [ 5.375428@3] sdio: clock 200000000, 4-bit-bus-width
- [ 5.375428@3]
- [ 5.375772@3] meson-mmc: [sdio_reinit] finish
- [ 5.417436@2] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
- [ 5.417441@2] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 6.156851@3] fb: osd_release now.index=0,open_count=1
- [ 6.156910@3] Console: switching to colour dummy device 80x25
- [ 6.518291@1] [0]: vcodec_dec decoder ffffffc0570e2000
- [ 6.518541@1] [0]: release decoder ffffffc0570e2000
- [ 6.619916@0] usbcore: registered new interface driver r8152
- [ 6.773453@0] usb 1-1: reset high-speed USB device number 2 using xhci-hcd
- [ 6.780072@2] Registered IR keymap rc-empty
- [ 6.780417@2] input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input5
- [ 6.783062@1] usbcore: registered new interface driver cdc_ether
- [ 6.785255@3] rc rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
- [ 6.816817@3] meson-ir c8100580.meson-ir: AO_RTI_PIN_MUX : 0x109801
- [ 6.816872@3] meson-ir c8100580.meson-ir: receiver initialized
- [ 6.832395@2] mali-utgard d00c0000.mali: set min pp to default 1
- [ 6.832403@2] mali-utgard d00c0000.mali: set min clk default to 0
- [ 6.832518@2] mali-utgard d00c0000.mali: max clk set 2
- [ 6.832525@2] mali-utgard d00c0000.mali: turbo clk set to 3
- [ 6.843697@0] lirc_dev: IR Remote Control driver registered, major 498
- [ 6.852716@1] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-gpufreq-0 failed:-22
- [ 6.852731@1] gpu cooling register okay with err=0
- [ 6.855388@0] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
- [ 6.855397@0] IR LIRC bridge handler initialized
- [ 6.855514@0] gpu core cooling register okay with err=0
- [ 6.855963@0] Mali: Mali device driver loaded
- [ 6.912137@3] internal phy init
- [ 6.984039@3] internal phy init
- [ 6.998180@2] meson6-dwmac c9410000.ethernet eth0: fail to init PTP.
- [ 6.998804@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 7.002281@0] r8152 1-1:1.0 eth1: v2.12.0 (2019/04/29)
- [ 7.002290@0] r8152 1-1:1.0 eth1: This product is covered by one or more of the following patents:
- [ 7.002290@0] US6,570,884, US6,115,776, and US6,327,625.
- [ 7.002290@0]
- [ 7.027354@3] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 7.488056@2] IR NEC protocol handler initialized
- [ 7.502087@3] wlan: loading driver v4.5.20.037
- [ 7.502489@3] hifDeviceInserted: Dumping clocks (50000000,200000000)
- [ 7.527602@3] ath_hif_sdio: HIF (Atheros/multi-bss)
- [ 7.655504@2] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
- [ 7.684822@1] Board extended Data download address: 0x0
- [ 7.701260@1] ol_download_firmware: Using 0x1234 for the remainder of init
- [ 7.768765@0] ol_transfer_bin_file: Loading setup file qsetup30.bin
- [ 7.768864@0] ar6k_wlan sdio:0001:1: Direct firmware load for qsetup30.bin failed with error -2
- [ 7.768870@0] ol_transfer_bin_file: Failed to get qsetup30.bin
- [ 8.010789@2] wol_reg12[12]==0, error
- [ 8.918237@0] WDA_open-4688: WMA --> wmi_unified_attach - success
- [ 8.918264@0] ol_if_dfs_attach: called; ptr=ffffffc054081b54, radar_info=ffffffc0545e7b78
- [ 8.923313@0] MAILBOX SWAP Service is enabled!
- [ 8.923318@0] Reduced Tx Complete service is enabled!
- [ 8.924476@1] is_full_reorder_offloaded? 0
- [ 8.925659@0] htt_tx_attach:htt_desc_start:0xffffffc0546c0000 htt_desc_end:0xffffffc0546dc200
- [ 8.926519@0] wma_pre_start-5056: WMA --> wmi_unified_connect_htc_service - success
- [ 8.926547@0] wma_mc_process_msg-21967: McThread: WNI_CFG_DNLD_REQ
- [ 8.929182@1] __wmi_control_rx: WMI UNIFIED SERVICE READY event
- [ 8.929192@1] wma_rx_service_ready_event-24799: WMA <-- WMI_SERVICE_READY_EVENTID
- [ 8.929200@1] wma_rx_service_ready_event-24914: WMA --> WMI_INIT_CMDID
- [ 8.936083@1] __wmi_control_rx: WMI UNIFIED READY event
- [ 8.936093@1] wma_rx_ready_event-24943: WMA <-- WMI_READY_EVENTID
- [ 8.937062@0] ar6k_wlan sdio:0001:1: Direct firmware load for wlan/wlan_mac.bin failed with error -2
- [ 8.937466@0] session id - 0, AddSta session - 0
- [ 8.937748@1] wma_vdev_attach-5905: vdev_id 0, txrx_vdev_handle = ffffffc05b0e4a00
- [ 8.938061@1] target uses HTT version 3.32; host uses 3.23
- [ 8.938067@1] *** Warning: host/target HTT versions are different, though compatible!
- [ 8.939339@0] session id - 1, AddSta session - 0
- [ 8.940704@0] wma_vdev_attach-5905: vdev_id 1, txrx_vdev_handle = ffffffc05b09d800
- [ 8.940713@0] wma_vdev_attach-5971: P2P Device: creating self peer f2:03:8c:ab:86:2f, vdev_id 1
- [ 8.944916@3] Host SW:4.5.20.037, FW:0.0.0.60, HW:QCA9377_REV1_1
- [ 8.945031@3] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32
- [ 8.945205@0] wlan_logging_sock_activate_svc: Activated wlan_logging svc
- [ 8.945340@3] wlan: driver loaded
- [ 8.953672@1] TXRX: ol_txrx_peer_find_add_id: Delete Peer ffffffc0547b8000
- [ 9.211275@1] BT_RADIO going: on
- [ 9.211280@1] AML_BT: going ON
- [ 9.627319@1] the demux clock on, ref cnt: 1
- [ 9.627328@1] the parser_top clock on, ref cnt: 1
- [ 9.627332@1] the vdec clock on, ref cnt: 1
- [ 9.627355@1] the clk_hevc_mux clock on, ref cnt: 1
- [ 9.627365@1] hevc mux clock is 500000000 Hz
- [ 9.627393@1] the clk_vdec_mux clock on, ref cnt: 1
- [ 9.627399@1] vdec mux clock is 500000000 Hz
- [ 9.627463@1] vdec_create instance ffffff800e1cd000, total 1
- [ 9.627486@1] vdec_disable_DMC input->target= 0x0
- [ 9.627490@1] vdec_release instance ffffff800e1cd000, total 1
- [ 9.627515@1] the clk_vdec_mux clock off, ref cnt: 0
- [ 9.627520@1] the vdec clock off, ref cnt: 0
- [ 9.627523@1] the parser_top clock off, ref cnt: 0
- [ 9.627526@1] the demux clock off, ref cnt: 0
- [ 9.673393@1] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 0 to 9600
- [ 9.673446@1] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 9600 to 9600
- [ 9.673462@1] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 9600 to 115200
- [ 9.707986@3] internal phy init
- [ 9.765632@1] Bluetooth: Core ver 2.22
- [ 9.765726@1] NET: Registered protocol family 31
- [ 9.765730@1] Bluetooth: HCI device and connection manager initialized
- [ 9.765744@1] Bluetooth: HCI socket layer initialized
- [ 9.765752@1] Bluetooth: L2CAP socket layer initialized
- [ 9.765781@1] Bluetooth: SCO socket layer initialized
- [ 9.780071@0] internal phy init
- [ 9.791499@1] meson6-dwmac c9410000.ethernet eth0: fail to init PTP.
- [ 9.791888@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 9.799416@3] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 10.134123@0] snd_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4
- [ 10.134150@0] snd_spdif_dai: set 958 audio clk div 2
- [ 10.164476@1] audio_dsp: buf=0
- [ 10.164485@1] audio_dsp: IEC958_mode_raw=0
- [ 10.164528@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 10.164530@1] audio_dsp: last mode 0,now 0
- [ 10.170068@1] snd_spdif_dai: set normal 512 fs /4 fs
- [ 10.170077@1] snd_spdif_dai: set 958 audio clk div 4
- [ 10.170088@1] hdmitx: hw: set audio
- [ 10.170091@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
- [ 10.170118@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 10.170121@1] hdmitx: hw: aud_n_para = 6272
- [ 10.170137@1] hdmitx: hw: set channel status
- [ 10.170190@1] hdmitx: audio: Audio Type: PCM
- [ 10.170192@1] hdmitx: audio: set audio param
- [ 10.170413@1] snd_spdif_dai: set normal 512 fs /4 fs
- [ 10.224502@1] fb: osd_release now.index=0,open_count=1
- [ 10.273314@0] audio_dsp: buf=0
- [ 10.273323@0] audio_dsp: IEC958_mode_raw=0
- [ 10.273362@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 10.273365@0] audio_dsp: last mode 0,now 0
- [ 10.278423@0] snd_spdif_dai: set normal 512 fs /4 fs
- [ 10.278625@0] snd_spdif_dai: set normal 512 fs /4 fs
- [ 10.439891@0] audio_dsp: buf=0
- [ 10.439899@0] audio_dsp: IEC958_mode_raw=0
- [ 10.439938@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 10.439941@0] audio_dsp: last mode 0,now 0
- [ 10.445035@0] snd_spdif_dai: set normal 512 fs /4 fs
- [ 10.445243@0] snd_spdif_dai: set normal 512 fs /4 fs
- [ 10.518326@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 10.520152@3] r8152 1-1:1.0 eth1: carrier on
- [ 10.540051@0] 8021q: 802.1Q VLAN Support v1.8
- [ 14.122708@0] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 115200 to 2000000
- [ 14.167759@1] Bluetooth: HCI UART driver ver 2.3
- [ 14.167767@1] Bluetooth: HCI UART protocol H4 registered
- [ 14.167770@1] Bluetooth: HCI UART protocol BCSP registered
- [ 14.167772@1] Bluetooth: HCI UART protocol LL registered
- [ 14.167774@1] Bluetooth: HCI UART protocol ATH3K registered
- [ 14.167776@1] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 14.168002@1] Bluetooth: HCI UART protocol Intel registered
- [ 14.168207@1] Bluetooth: HCI UART protocol Broadcom registered
- [ 14.168213@1] Bluetooth: HCI UART protocol QCA registered
- [ 14.168215@1] Bluetooth: HCI UART protocol AG6XX registered
- [ 14.168217@1] Bluetooth: HCI UART protocol Marvell registered
- [ 62.474680@1] fb: mem_free_work, free memory: addr:800000
Add Comment
Please, Sign In to add comment