API tools faq
paste
Advertisement
Guest User

moje dmesg

a guest
Apr 9th, 2019
280
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 31.54 KB | None | 0 0
raw download clone embed print report
  1. [ 0.053991] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
  2. [ 0.053992] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
  3. [ 0.055402] DMAR-IR: Enabled IRQ remapping in x2apic mode
  4. [ 0.055403] x2apic enabled
  5. [ 0.055419] Switched APIC routing to cluster x2apic.
  6. [ 0.060038] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  7. [ 0.099733] TSC deadline timer enabled
  8. [ 0.099738] smpboot: CPU0: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xb)
  9. [ 0.099740] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
  10. [ 0.099764] ... version: 4
  11. [ 0.099765] ... bit width: 48
  12. [ 0.099765] ... generic registers: 8
  13. [ 0.099766] ... value mask: 0000ffffffffffff
  14. [ 0.099766] ... max period: 00007fffffffffff
  15. [ 0.099766] ... fixed-purpose events: 3
  16. [ 0.099767] ... event mask: 00000007000000ff
  17. [ 0.100137] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  18. [ 0.100205] x86: Booting SMP configuration:
  19. [ 0.100205] .... node #0, CPUs: #1 #2 #3
  20. [ 0.107491] x86: Booted up 1 node, 4 CPUs
  21. [ 0.107493] smpboot: Total of 4 processors activated (28800.00 BogoMIPS)
  22. [ 0.109809] devtmpfs: initialized
  23. [ 0.109849] x86/mm: Memory block size: 128MB
  24. [ 0.112025] PM: Registering ACPI NVS region [mem 0x8143c000-0x8143cfff] (4096 bytes)
  25. [ 0.112025] PM: Registering ACPI NVS region [mem 0x89230000-0x895d7fff] (3833856 bytes)
  26. [ 0.112097] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  27. [ 0.112101] futex hash table entries: 1024 (order: 4, 65536 bytes)
  28. [ 0.112128] pinctrl core: initialized pinctrl subsystem
  29. [ 0.112196] NET: Registered protocol family 16
  30. [ 0.125620] cpuidle: using governor ladder
  31. [ 0.145639] cpuidle: using governor menu
  32. [ 0.145700] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  33. [ 0.145701] ACPI: bus type PCI registered
  34. [ 0.145702] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  35. [ 0.145757] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  36. [ 0.145758] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  37. [ 0.145765] PCI: Using configuration type 1 for base access
  38. [ 0.161765] HugeTLB registered 1 GB page size, pre-allocated 0 pages
  39. [ 0.161766] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  40. [ 0.161913] ACPI: Added _OSI(Module Device)
  41. [ 0.161914] ACPI: Added _OSI(Processor Device)
  42. [ 0.161914] ACPI: Added _OSI(3.0 _SCP Extensions)
  43. [ 0.161914] ACPI: Added _OSI(Processor Aggregator Device)
  44. [ 0.178169] ACPI: Executed 52 blocks of module-level executable AML code
  45. [ 0.711439] ACPI: Dynamic OEM Table Load:
  46. [ 0.711443] ACPI: SSDT 0xFFFF9DB02422F800 00076B (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
  47. [ 0.711627] ACPI: Executed 1 blocks of module-level executable AML code
  48. [ 0.711697] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
  49. [ 0.712754] ACPI: Dynamic OEM Table Load:
  50. [ 0.712757] ACPI: SSDT 0xFFFF9DB02418B400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
  51. [ 0.712914] ACPI: Executed 1 blocks of module-level executable AML code
  52. [ 0.713275] ACPI: Dynamic OEM Table Load:
  53. [ 0.713279] ACPI: SSDT 0xFFFF9DB0240F5000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
  54. [ 0.713874] ACPI: Executed 1 blocks of module-level executable AML code
  55. [ 0.713999] ACPI: Dynamic OEM Table Load:
  56. [ 0.714002] ACPI: SSDT 0xFFFF9DB02418B800 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
  57. [ 0.714188] ACPI: Executed 1 blocks of module-level executable AML code
  58. [ 0.716135] ACPI: Interpreter enabled
  59. [ 0.716166] ACPI: (supports S0 S3 S4 S5)
  60. [ 0.716166] ACPI: Using IOAPIC for interrupt routing
  61. [ 0.716193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  62. [ 0.725341] ACPI: Power Resource [USBC] (on)
  63. [ 0.725467] ACPI: Power Resource [PAUD] (on)
  64. [ 0.727990] ACPI: Power Resource [SPR2] (off)
  65. [ 0.728152] ACPI: Power Resource [SPR3] (off)
  66. [ 0.728391] ACPI: Power Resource [V0PR] (on)
  67. [ 0.728540] ACPI: Power Resource [V1PR] (on)
  68. [ 0.728685] ACPI: Power Resource [V2PR] (on)
  69. [ 0.729544] ACPI: Power Resource [PXTC] (on)
  70. [ 0.731137] ACPI: Power Resource [WRST] (on)
  71. [ 0.733358] ACPI: Power Resource [FN00] (off)
  72. [ 0.733420] ACPI: Power Resource [FN01] (off)
  73. [ 0.733482] ACPI: Power Resource [FN02] (off)
  74. [ 0.733542] ACPI: Power Resource [FN03] (off)
  75. [ 0.733603] ACPI: Power Resource [FN04] (off)
  76. [ 0.734074] ACPI: Power Resource [PIN] (off)
  77. [ 0.734336] ACPI: Power Resource [SPR0] (off)
  78. [ 0.734378] ACPI: Power Resource [SPR1] (off)
  79. [ 0.734421] ACPI: Power Resource [SPR5] (off)
  80. [ 0.734640] ACPI: Power Resource [ZPDR] (off)
  81. [ 0.734908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
  82. [ 0.734912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  83. [ 0.735034] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
  84. [ 0.735148] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
  85. [ 0.735149] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
  86. [ 0.735902] PCI host bridge to bus 0000:00
  87. [ 0.735903] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  88. [ 0.735904] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  89. [ 0.735905] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  90. [ 0.735906] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window]
  91. [ 0.735907] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
  92. [ 0.735908] pci_bus 0000:00: root bus resource [bus 00-fe]
  93. [ 0.735913] pci 0000:00:00.0: [8086:3e1f] type 00 class 0x060000
  94. [ 0.736184] pci 0000:00:02.0: [8086:3e91] type 00 class 0x030000
  95. [ 0.736190] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
  96. [ 0.736194] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
  97. [ 0.736197] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
  98. [ 0.736387] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
  99. [ 0.736404] pci 0000:00:12.0: reg 0x10: [mem 0xa113d000-0xa113dfff 64bit]
  100. [ 0.736579] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
  101. [ 0.736592] pci 0000:00:14.0: reg 0x10: [mem 0xa1120000-0xa112ffff 64bit]
  102. [ 0.736644] pci 0000:00:14.0: PME# supported from D3hot D3cold
  103. [ 0.736762] pci 0000:00:14.0: System wakeup disabled by ACPI
  104. [ 0.736797] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
  105. [ 0.736812] pci 0000:00:14.2: reg 0x10: [mem 0xa1136000-0xa1137fff 64bit]
  106. [ 0.736823] pci 0000:00:14.2: reg 0x18: [mem 0xa113c000-0xa113cfff 64bit]
  107. [ 0.736961] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
  108. [ 0.736980] pci 0000:00:16.0: reg 0x10: [mem 0xa113b000-0xa113bfff 64bit]
  109. [ 0.737050] pci 0000:00:16.0: PME# supported from D3hot
  110. [ 0.737219] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
  111. [ 0.737230] pci 0000:00:17.0: reg 0x10: [mem 0xa1134000-0xa1135fff]
  112. [ 0.737236] pci 0000:00:17.0: reg 0x14: [mem 0xa113a000-0xa113a0ff]
  113. [ 0.737242] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
  114. [ 0.737248] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
  115. [ 0.737254] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
  116. [ 0.737260] pci 0000:00:17.0: reg 0x24: [mem 0xa1139000-0xa11397ff]
  117. [ 0.737292] pci 0000:00:17.0: PME# supported from D3hot
  118. [ 0.737461] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
  119. [ 0.737519] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  120. [ 0.737623] pci 0000:00:1d.0: System wakeup disabled by ACPI
  121. [ 0.737695] pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100
  122. [ 0.737955] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
  123. [ 0.737991] pci 0000:00:1f.3: reg 0x10: [mem 0xa1130000-0xa1133fff 64bit]
  124. [ 0.738038] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
  125. [ 0.738116] pci 0000:00:1f.3: PME# supported from D3hot D3cold
  126. [ 0.738307] pci 0000:00:1f.3: System wakeup disabled by ACPI
  127. [ 0.738346] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
  128. [ 0.738359] pci 0000:00:1f.4: reg 0x10: [mem 0xa1138000-0xa11380ff 64bit]
  129. [ 0.738386] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
  130. [ 0.738507] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
  131. [ 0.738517] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
  132. [ 0.738648] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
  133. [ 0.738675] pci 0000:00:1f.6: reg 0x10: [mem 0xa1100000-0xa111ffff]
  134. [ 0.738817] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
  135. [ 0.738880] pci 0000:00:1f.6: System wakeup disabled by ACPI
  136. [ 0.738969] acpiphp: Slot [1] registered
  137. [ 0.738978] pci 0000:00:1d.0: PCI bridge to [bus 01]
  138. [ 0.740250] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  139. [ 0.740666] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  140. [ 0.741081] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  141. [ 0.741493] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  142. [ 0.741909] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  143. [ 0.742321] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  144. [ 0.742734] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  145. [ 0.743147] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20160831/pci_link-176)
  146. [ 0.744216] ACPI: Enabled 5 GPEs in block 00 to 7F
  147. [ 0.744284] vgaarb: setting as boot device: PCI:0000:00:02.0
  148. [ 0.744285] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  149. [ 0.744287] vgaarb: loaded
  150. [ 0.744287] vgaarb: bridge control possible 0000:00:02.0
  151. [ 0.744325] PCI: Using ACPI for IRQ routing
  152. [ 0.787686] PCI: pci_cache_line_size set to 64 bytes
  153. [ 0.787739] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
  154. [ 0.787740] e820: reserve RAM buffer [mem 0x8143c000-0x83ffffff]
  155. [ 0.787741] e820: reserve RAM buffer [mem 0x88c6b000-0x8bffffff]
  156. [ 0.787742] e820: reserve RAM buffer [mem 0x89230000-0x8bffffff]
  157. [ 0.787742] e820: reserve RAM buffer [mem 0x89f00000-0x8bffffff]
  158. [ 0.787743] e820: reserve RAM buffer [mem 0x26e800000-0x26fffffff]
  159. [ 0.787871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  160. [ 0.787875] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
  161. [ 0.789923] clocksource: Switched to clocksource hpet
  162. [ 0.793850] VFS: Disk quotas dquot_6.6.0
  163. [ 0.793889] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  164. [ 0.793978] pnp: PnP ACPI init
  165. [ 0.794148] system 00:00: [io 0x0a00-0x0a2f] has been reserved
  166. [ 0.794149] system 00:00: [io 0x0a30-0x0a3f] has been reserved
  167. [ 0.794150] system 00:00: [io 0x0a40-0x0a4f] has been reserved
  168. [ 0.794152] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  169. [ 0.794647] pnp 00:01: [dma 0 disabled]
  170. [ 0.794678] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
  171. [ 0.794756] system 00:02: [io 0x0680-0x069f] has been reserved
  172. [ 0.794757] system 00:02: [io 0x164e-0x164f] has been reserved
  173. [ 0.794758] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  174. [ 0.794771] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  175. [ 0.794834] system 00:04: [io 0x1854-0x1857] has been reserved
  176. [ 0.794836] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  177. [ 0.794962] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
  178. [ 0.794963] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
  179. [ 0.794964] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
  180. [ 0.794965] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
  181. [ 0.794966] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
  182. [ 0.794967] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
  183. [ 0.794968] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
  184. [ 0.794969] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
  185. [ 0.794971] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  186. [ 0.795126] system 00:06: [io 0x1800-0x18fe] could not be reserved
  187. [ 0.795127] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
  188. [ 0.795128] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
  189. [ 0.795129] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
  190. [ 0.795130] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
  191. [ 0.795131] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
  192. [ 0.795132] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
  193. [ 0.795134] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  194. [ 0.795341] system 00:07: [io 0x2000-0x20fe] has been reserved
  195. [ 0.795343] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  196. [ 0.796066] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  197. [ 0.796564] pnp: PnP ACPI: found 9 devices
  198. [ 0.805272] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  199. [ 0.805284] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
  200. [ 0.805286] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
  201. [ 0.805287] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
  202. [ 0.805290] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
  203. [ 0.805291] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
  204. [ 0.805292] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  205. [ 0.805293] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
  206. [ 0.805294] pci 0000:00:1d.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
  207. [ 0.805295] pci 0000:00:1d.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
  208. [ 0.805297] pci 0000:00:1d.0: BAR 14: assigned [mem 0x8f800000-0x8f9fffff]
  209. [ 0.805300] pci 0000:00:1d.0: BAR 15: assigned [mem 0x8fa00000-0x8fbfffff 64bit pref]
  210. [ 0.805301] pci 0000:00:1d.0: BAR 13: assigned [io 0x4000-0x4fff]
  211. [ 0.805303] pci 0000:00:1d.0: PCI bridge to [bus 01]
  212. [ 0.805309] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
  213. [ 0.805312] pci 0000:00:1d.0: bridge window [mem 0x8f800000-0x8f9fffff]
  214. [ 0.805314] pci 0000:00:1d.0: bridge window [mem 0x8fa00000-0x8fbfffff 64bit pref]
  215. [ 0.805319] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  216. [ 0.805320] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  217. [ 0.805320] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  218. [ 0.805321] pci_bus 0000:00: resource 7 [mem 0x8f800000-0xdfffffff window]
  219. [ 0.805322] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
  220. [ 0.805323] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
  221. [ 0.805324] pci_bus 0000:01: resource 1 [mem 0x8f800000-0x8f9fffff]
  222. [ 0.805325] pci_bus 0000:01: resource 2 [mem 0x8fa00000-0x8fbfffff 64bit pref]
  223. [ 0.805521] NET: Registered protocol family 2
  224. [ 0.805640] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  225. [ 0.805723] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  226. [ 0.805857] TCP: Hash tables configured (established 65536 bind 65536)
  227. [ 0.805872] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  228. [ 0.805893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  229. [ 0.805983] NET: Registered protocol family 1
  230. [ 0.805992] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  231. [ 0.806545] PCI: CLS 64 bytes, default 64
  232. [ 0.806569] Unpacking initramfs...
  233. [ 1.013366] Freeing initrd memory: 18008K
  234. [ 1.013454] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  235. [ 1.013456] software IO TLB [mem 0x84c6b000-0x88c6b000] (64MB) mapped at [ffff9dae44c6b000-ffff9dae48c6afff]
  236. [ 1.013734] audit: initializing netlink subsys (disabled)
  237. [ 1.013747] audit: type=2000 audit(1554792954.000:1): initialized
  238. [ 1.014200] workingset: timestamp_bits=40 max_order=21 bucket_order=0
  239. [ 1.014310] zbud: loaded
  240. [ 1.015678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  241. [ 1.015750] io scheduler noop registered
  242. [ 1.015750] io scheduler deadline registered
  243. [ 1.015759] io scheduler cfq registered (default)
  244. [ 1.015832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  245. [ 1.015834] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  246. [ 1.015844] intel_idle: MWAIT substates: 0x11142120
  247. [ 1.015845] intel_idle: v0.4.1 model 0x9E
  248. [ 1.015993] intel_idle: lapic_timer_reliable_states 0xffffffff
  249. [ 1.016099] GHES: HEST is not enabled!
  250. [ 1.016158] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  251. [ 1.037262] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  252. [ 1.037746] Linux agpgart interface v0.103
  253. [ 1.037805] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
  254. [ 1.037805] AMD IOMMUv2 functionality not available on this system
  255. [ 1.038163] i8042: PNP: No PS/2 controller found. Probing ports directly.
  256. [ 1.039146] serio: i8042 KBD port at 0x60,0x64 irq 1
  257. [ 1.039148] serio: i8042 AUX port at 0x60,0x64 irq 12
  258. [ 1.039317] mousedev: PS/2 mouse device common for all mice
  259. [ 1.039364] rtc_cmos 00:03: RTC can wake from S4
  260. [ 1.039861] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  261. [ 1.039957] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  262. [ 1.039961] intel_pstate: Intel P-state driver initializing
  263. [ 1.040500] intel_pstate: HWP enabled
  264. [ 1.040663] ledtrig-cpu: registered to indicate activity on CPUs
  265. [ 1.041079] NET: Registered protocol family 10
  266. [ 1.041313] mip6: Mobile IPv6
  267. [ 1.041314] NET: Registered protocol family 17
  268. [ 1.041315] mpls_gso: MPLS GSO support
  269. [ 1.041455] microcode: sig=0x906eb, pf=0x2, revision=0x8e
  270. [ 1.041589] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  271. [ 1.041731] registered taskstats version 1
  272. [ 1.041739] zswap: loaded using pool lzo/zbud
  273. [ 1.042087] ima: No TPM chip found, activating TPM-bypass!
  274. [ 1.042088] ima: Allocated hash algorithm: sha256
  275. [ 1.042945] rtc_cmos 00:03: setting system clock to 2019-04-09 06:55:54 UTC (1554792954)
  276. [ 1.042978] PM: Hibernation image not present or could not be loaded.
  277. [ 1.278531] Freeing unused kernel memory: 1424K
  278. [ 1.278531] Write protecting the kernel read-only data: 12288k
  279. [ 1.279587] Freeing unused kernel memory: 1908K
  280. [ 1.280964] Freeing unused kernel memory: 1224K
  281. [ 1.283882] x86/mm: Checked W+X mappings: passed, no W+X pages found.
  282. [ 1.293516] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  283. [ 1.293560] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  284. [ 1.293566] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  285. [ 1.345314] SCSI subsystem initialized
  286. [ 1.345601] ACPI: bus type USB registered
  287. [ 1.345615] usbcore: registered new interface driver usbfs
  288. [ 1.345620] usbcore: registered new interface driver hub
  289. [ 1.345632] usbcore: registered new device driver usb
  290. [ 1.346845] libata version 3.00 loaded.
  291. [ 1.346979] xhci_hcd 0000:00:14.0: xHCI Host Controller
  292. [ 1.346982] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
  293. [ 1.348588] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
  294. [ 1.348591] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  295. [ 1.348747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  296. [ 1.348748] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  297. [ 1.348748] usb usb1: Product: xHCI Host Controller
  298. [ 1.348749] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
  299. [ 1.348750] usb usb1: SerialNumber: 0000:00:14.0
  300. [ 1.349070] hub 1-0:1.0: USB hub found
  301. [ 1.349136] hub 1-0:1.0: 16 ports detected
  302. [ 1.355881] xhci_hcd 0000:00:14.0: xHCI Host Controller
  303. [ 1.355883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  304. [ 1.355885] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
  305. [ 1.355937] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  306. [ 1.355938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  307. [ 1.355939] usb usb2: Product: xHCI Host Controller
  308. [ 1.355939] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd
  309. [ 1.355940] usb usb2: SerialNumber: 0000:00:14.0
  310. [ 1.356013] hub 2-0:1.0: USB hub found
  311. [ 1.356021] hub 2-0:1.0: 6 ports detected
  312. [ 1.356619] ahci 0000:00:17.0: version 3.0
  313. [ 1.356982] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
  314. [ 1.356984] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
  315. [ 1.357769] AVX2 version of gcm_enc/dec engaged.
  316. [ 1.357769] AES CTR mode by8 optimization enabled
  317. [ 1.415053] scsi host0: ahci
  318. [ 1.415371] scsi host1: ahci
  319. [ 1.415648] scsi host2: ahci
  320. [ 1.415880] scsi host3: ahci
  321. [ 1.416049] scsi host4: ahci
  322. [ 1.416207] scsi host5: ahci
  323. [ 1.416257] ata1: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139100 irq 123
  324. [ 1.416268] ata2: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139180 irq 123
  325. [ 1.416279] ata3: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139200 irq 123
  326. [ 1.416281] ata4: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139280 irq 123
  327. [ 1.416291] ata5: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139300 irq 123
  328. [ 1.416302] ata6: SATA max UDMA/133 abar m2048@0xa1139000 port 0xa1139380 irq 123
  329. [ 1.682035] usb 1-5: new low-speed USB device number 2 using xhci_hcd
  330. [ 1.730763] ata5: SATA link down (SStatus 4 SControl 300)
  331. [ 1.730793] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  332. [ 1.730819] ata6: SATA link down (SStatus 4 SControl 300)
  333. [ 1.730847] ata2: SATA link down (SStatus 4 SControl 300)
  334. [ 1.730881] ata1: SATA link down (SStatus 4 SControl 300)
  335. [ 1.730948] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  336. [ 1.731243] ata3.00: ATA-9: WDC WDS240G2G0A-00JH30, UF500000, max UDMA/133
  337. [ 1.731248] ata3.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 31/32)
  338. [ 1.732139] ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
  339. [ 1.733627] ata4.00: configured for UDMA/133
  340. [ 1.736157] ata3.00: configured for UDMA/133
  341. [ 1.736916] scsi 2:0:0:0: Direct-Access ATA WDC WDS240G2G0A- 0000 PQ: 0 ANSI: 5
  342. [ 1.767838] scsi 3:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
  343. [ 1.788152] sd 2:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
  344. [ 1.788228] sd 2:0:0:0: [sda] Write Protect is off
  345. [ 1.788234] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  346. [ 1.788259] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  347. [ 1.789568] sda: sda1 sda2 < sda5 >
  348. [ 1.789835] sd 2:0:0:0: [sda] Attached SCSI disk
  349. [ 1.801336] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  350. [ 1.801339] cdrom: Uniform CD-ROM driver Revision: 3.20
  351. [ 1.802142] sr 3:0:0:0: Attached scsi CD-ROM sr0
  352. [ 1.825269] usb 1-5: New USB device found, idVendor=046d, idProduct=c077
  353. [ 1.825274] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  354. [ 1.825278] usb 1-5: Product: USB Optical Mouse
  355. [ 1.825282] usb 1-5: Manufacturer: Logitech
  356. [ 1.830281] hidraw: raw HID events driver (C) Jiri Kosina
  357. [ 1.833251] usbcore: registered new interface driver usbhid
  358. [ 1.833253] usbhid: USB HID core driver
  359. [ 1.834914] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C077.0001/input/input3
  360. [ 1.835156] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
  361. [ 1.946059] usb 1-8: new low-speed USB device number 3 using xhci_hcd
  362. [ 2.026072] tsc: Refined TSC clocksource calibration: 3600.002 MHz
  363. [ 2.026098] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4559ce44, max_idle_ns: 440795364889 ns
  364. [ 2.091465] usb 1-8: New USB device found, idVendor=1a2c, idProduct=0c23
  365. [ 2.091470] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  366. [ 2.091474] usb 1-8: Product: USB Keyboard
  367. [ 2.091478] usb 1-8: Manufacturer: USB
  368. [ 2.094721] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:1A2C:0C23.0002/input/input4
  369. [ 2.154445] hid-generic 0003:1A2C:0C23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-8/input0
  370. [ 2.158245] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1A2C:0C23.0003/input/input5
  371. [ 2.218291] hid-generic 0003:1A2C:0C23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-8/input1
  372. [ 3.050495] clocksource: Switched to clocksource tsc
  373. [ 3.379803] ACPI: Invalid passive threshold
  374. [ 3.379969] thermal LNXTHERM:00: registered as thermal_zone0
  375. [ 3.379969] ACPI: Thermal Zone [TZ10] (17 C)
  376. [ 3.438481] thermal LNXTHERM:01: registered as thermal_zone1
  377. [ 3.438484] ACPI: Thermal Zone [TZ00] (28 C)
  378. [ 3.463166] PM: Starting manual resume from disk
  379. [ 3.463171] PM: Hibernation image partition 8:5 present
  380. [ 3.463173] PM: Looking for hibernation image.
  381. [ 3.463559] PM: Image not found (code -22)
  382. [ 3.463561] PM: Hibernation image not present or could not be loaded.
  383. [ 3.557300] random: fast init done
  384. [ 3.595357] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  385. [ 3.860249] ip_tables: (C) 2000-2006 Netfilter Core Team
  386. [ 3.880910] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  387. [ 3.881415] systemd[1]: Detected architecture x86-64.
  388. [ 3.882087] systemd[1]: Set hostname to <Debian>.
  389. [ 3.945613] systemd-sysv-generator[209]: Unknown unit type for unit 'usr-sbin-EpsonControlDashboard-scripts-bin-www.mount'
  390. [ 4.083558] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked.
  391. [ 4.083622] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
  392. [ 4.085049] systemd[1]: Listening on Journal Socket.
  393. [ 4.085236] systemd[1]: Listening on Syslog Socket.
  394. [ 4.085295] systemd[1]: Listening on fsck to fsckd communication Socket.
  395. [ 4.085325] systemd[1]: Reached target User and Group Name Lookups.
  396. [ 4.085380] systemd[1]: Listening on RPCbind Server Activation Socket.
  397. [ 4.136210] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  398. [ 4.149053] lp: driver loaded but no devices found
  399. [ 4.155776] ppdev: user-space parallel port driver
  400. [ 4.159352] RPC: Registered named UNIX socket transport module.
  401. [ 4.159355] RPC: Registered udp transport module.
  402. [ 4.159357] RPC: Registered tcp transport module.
  403. [ 4.159358] RPC: Registered tcp NFSv4.1 backchannel transport module.
  404. [ 4.173265] fuse init (API version 7.26)
  405. [ 4.197609] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  406. [ 4.207037] systemd-journald[228]: Received request to flush runtime journal from PID 1
  407. [ 4.380653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
  408. [ 4.380657] ACPI: Sleep Button [SLPB]
  409. [ 4.380694] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
  410. [ 4.380695] ACPI: Power Button [PWRB]
  411. [ 4.380730] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
  412. [ 4.380731] ACPI: Power Button [PWRF]
  413. [ 4.458206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  414. [ 4.458569] sd 2:0:0:0: Attached scsi generic sg0 type 0
  415. [ 4.458594] sr 3:0:0:0: Attached scsi generic sg1 type 5
  416. [ 4.459084] wmi: Mapper loaded
  417. [ 4.460963] input: PC Speaker as /devices/platform/pcspkr/input/input9
  418. [ 4.493391] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  419. [ 4.493392] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  420. [ 4.493394] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  421. [ 4.493394] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  422. [ 4.493395] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
  423. [ 4.493396] snd_hda_codec_realtek hdaudioC0D0: inputs:
  424. [ 4.493397] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
  425. [ 4.493397] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
  426. [ 4.493398] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
  427. [ 4.511249] Adding 8244220k swap on /dev/sda5. Priority:-1 extents:1 across:8244220k SSFS
  428. [ 4.511863] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
  429. [ 4.511984] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
  430. [ 4.514322] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
  431. [ 4.514357] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
  432. [ 4.514388] input: HDA Intel Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
  433. [ 4.514418] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
  434. [ 4.514448] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
  435. [ 4.514477] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
  436. [ 4.514517] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
  437. [ 4.514548] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
  438. [ 4.514587] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
  439. [ 4.587670] intel_rapl: Found RAPL domain package
  440. [ 4.587671] intel_rapl: Found RAPL domain core
  441. [ 4.587672] intel_rapl: Found RAPL domain uncore
  442. [ 5.670269] random: crng init done
  443. [ 5.670273] random: 7 urandom warning(s) missed due to ratelimiting
  444. [ 6.028736] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  445. [ 6.030005] NFSD: starting 90-second grace period (net ffffffffaa2dbf40)
  446. [ 867.775516] mtrr: no MTRR for 90000000,3ff0000 found
  447. [ 928.022542] usb 1-14: new high-speed USB device number 4 using xhci_hcd
  448. [ 928.163442] usb 1-14: New USB device found, idVendor=0bda, idProduct=8152
  449. [ 928.163448] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  450. [ 928.163452] usb 1-14: Product: USB 10/100 LAN
  451. [ 928.163455] usb 1-14: Manufacturer: Realtek
  452. [ 928.163459] usb 1-14: SerialNumber: 00E04C360B57
  453. [ 928.200331] usbcore: registered new interface driver r8152
  454. [ 928.205774] usbcore: registered new interface driver cdc_ether
  455. [ 928.318784] usb 1-14: reset high-speed USB device number 4 using xhci_hcd
  456. [ 928.515641] r8152 1-14:1.0 eth0: v1.08.9
  457. [ 928.522947] r8152 1-14:1.0 enx00e04c360b57: renamed from eth0
  458. [ 928.561891] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360b57: link is not ready
  459. [ 928.592539] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360b57: link is not ready
  460. [ 930.858759] r8152 1-14:1.0 enx00e04c360b57: carrier on
  461. [ 930.858783] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c360b57: link becomes ready
  462. root@Debian:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!