Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Ibl: pbl_read_emmc441() read 8k
- Ibl: pbl_read_emmc441() read 96k
- Ibl: pbl_read_emmc441() read download info
- Ibl: pbl_read_emmc441() endop
- Ibl: jump() verify_binary_integrity...ok
- Ibl: jump() jump!!!
- Welcome to Samsung Primitive Bootloader.
- build time: Sep 19 2012 18:31:37
- current time: ef/1f/7 3e:7f:70
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- <display_card_info:1009> ext_csd
- <display_card_info:1011>card_size: 15028
- Total Card Size: 15029 MByte
- mmc_init: card initialization completed!
- pbl found bootable sbl in #49152.
- jump to sbl 0x4d400000.
- Secondary Bootloader v3.1 version.
- Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
- Board: C1 REV 02 / Sep 19 2012 18:31:42
- current time: ef/1f/7 3e:7f:71
- booting code=0xc0c0c0c0
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- CID:150100 56594c30 304d1966 b7260f8e
- <display_card_info:1046> ext_csd
- <display_card_info:1048>card_size: 15028
- Total Card Size: 15029 MByte
- Total Sector Count: 30777344
- MoviNand Initialization Complete!
- ===== PARTITION INFORMATION =====
- ID : GANG (0x0)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : BOOT (0x1)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : EFS (0x4)
- DEVICE : MMC
- FIRST UNIT : 8192
- NO. UNITS : 40960
- =================================
- ID : SBL1 (0x2)
- DEVICE : MMC
- FIRST UNIT : 49152
- NO. UNITS : 2560
- =================================
- ID : SBL2 (0x3)
- DEVICE : MMC
- FIRST UNIT : 53248
- NO. UNITS : 2560
- =================================
- ID : PARAM (0x5)
- DEVICE : MMC
- FIRST UNIT : 57344
- NO. UNITS : 16384
- =================================
- ID : KERNEL (0x6)
- DEVICE : MMC
- FIRST UNIT : 73728
- NO. UNITS : 16384
- =================================
- ID : RECOVERY (0x7)
- DEVICE : MMC
- FIRST UNIT : 90112
- NO. UNITS : 16384
- =================================
- ID : CACHE (0x8)
- DEVICE : MMC
- FIRST UNIT : 106496
- NO. UNITS : 204800
- =================================
- ID : MODEM (0x9)
- DEVICE : MMC
- FIRST UNIT : 311296
- NO. UNITS : 32768
- =================================
- ID : FACTORYFS (0xa)
- DEVICE : MMC
- FIRST UNIT : 344064
- NO. UNITS : 2097152
- =================================
- ID : DATAFS (0xb)
- DEVICE : MMC
- FIRST UNIT : 2441216
- NO. UNITS : 12582912
- =================================
- ID : UMS (0xc)
- DEVICE : MMC
- FIRST UNIT : 15024128
- NO. UNITS : 14696448
- =================================
- ID : HIDDEN (0xd)
- DEVICE : MMC
- FIRST UNIT : 29720576
- NO. UNITS : 1048576
- =================================
- loke_init: j4fs_open..success
- <start_checksum:1033>CHECKSUM_HEADER_SECTOR :42
- <start_checksum:1035>offset:42, size:1024
- Not Need Movinand Checksum
- load_lfs_parameters valid magic code and version.
- switch_sel_str='1'
- load_debug_level: read debug level successfully(0x574f4c44)...LOW
- init_ddi_data: usable ddi data.
- init_fuel_gauge : not por status
- fuel_gauge_get_version: [1]=0, [0]=92
- init_fuel_gauge: vcell = 3682 mV, vfocv = 3964 mV, soc = 74
- microusb_get_attached_device: STATUS1:0x3f, 2:0x0
- microusb_get_attached_device: STATUS1:0x3f, 2:0x0
- 1401 = (366200 - 356525)*14484/100000
- [13] 373266 = (1401 * 100000) / 3680 + 335196
- init_microusb_ic: MUIC: CONTROL1:0x0
- init_microusb_ic: MUIC: CONTROL1:0x0
- init_microusb_ic: MUIC: CONTROL2:0x3a
- init_microusb_ic: MUIC: CONTROL2:0x3a
- reading nps status file is successfully!.
- nps status=0x504d4f43
- PMIC_IRQSRC = 0x0
- PMIC_IRQ1 = 0xb
- PMIC_IRQ2 = 0x1c
- PMIC_IRQ3 = 0x0
- PMIC_IRQ4 = 0x10
- PMIC_STATUS1 = 0x1
- PMIC_STATUS2 = 0x10
- PMIC_STATUS3 = 0x0
- PMIC_STATUS4 = 0x0
- bootloader base address=0x4d400000
- LPDDR0 1st. cached=0x40000000, size=0xe400000
- LPDDR0 non-cached=0x4e400000, size=0xa00000
- LPDDR0 2nd. cached=0x4ee00000, size=0x1200000
- RST_STAT = 0x10000
- get_hwrev() = 14
- board_process_platform: MAGIC c0c0c0c0 at 40000000!
- scan_keypad_level: pressed key is 0
- scan_keypad_level: pressed key is 2
- scan_keypad_level: pressed key is 3
- scan_keypad_level: pressed key is 0
- scan_keypad_level: pressed key is 2
- scan_keypad_level: pressed key is 3
- scan_keypad_level: pressed key is 0
- scan_keypad_level: pressed key is 2
- scan_keypad_level: pressed key is 3
- keypad_scan: name=recovery mode
- set_reboot_mode_recovery: oneshot recovery mode set
- microusb_get_attached_device: STATUS1:0x3f, 2:0x0
- microusb_get_attached_device: STATUS1:0x3f, 2:0x0
- microusb_get_attached_device: STATUS1:0x3f, 2:0x0
- microusb_get_attached_device: STATUS1:0x3f, 2:0x0
- hw_pm_status: jig_status = 0, chg_status = 0
- s5p_set_high_clk: ARM Clock = 800MHz.
- ......kernel is non signed binary.
- DISPLAY_PATH_SEL[MDNIE 0x1]is on
- div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520
- MDNIE setting Init start!!
- vsync interrupt is off
- video interrupt is off
- [fb0] turn on
- MDNIE setting Init end!!
- Autoboot (0 seconds) in progress, press any key to stop
- boot_kernel: debug level low!
- checkbit: find RECOVERY
- checkbit (ffffffff)
- ......kernel is non signed binary.
- ATAG_CORE: 5 54410001 0 0 0
- MEMCONFIG: 20e01323 20e01323
- ATAG_MEM: 4 54410002 10000000 40000000
- ATAG_MEM: 4 54410002 10000000 50000000
- ATAG_MEM: 4 54410002 10000000 60000000
- ATAG_MEM: 4 54410002 10000000 70000000
- ATAG_SERIAL: 4 54410006 b7260f8e 304d1966
- ATAG_REVISION: 3 54410007 e
- hardware_ID : 001966b7260f8e
- ATAG_CMDLINE: 47 54410009 'loglevel=4 console=ram bootmode=2 s3cfb.progress=0 androidboot.serialno=001966b7260f8e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m'
- ATAG_NONE: 0 0
- Starting kernel at 0x40008000...
- <6>[ 0.178414] c1 audit: initializing netlink socket (disabled)
- <5>[ 0.178477] c1 type=2000 audit(0.175:1): initialized
- <4>[ 0.179032] c1 highmem bounce pool size: 64 pages
- <6>[ 0.179294] c1 ashmem: initialized
- <6>[ 0.192545] c0 fuse init (API version 7.16)
- <6>[ 0.193006] c0 msgmni has been set to 1103
- <7>[ 0.193136] c0 SELinux: Registering netfilter hooks
- <6>[ 0.193627] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.193660] c0 FIPS: No test for cipher_null (cipher_null-generic)
- <6>[ 0.193761] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.193794] c0 FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
- <6>[ 0.193893] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.193925] c0 FIPS: No test for digest_null (digest_null-generic)
- <6>[ 0.194022] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.194054] c0 FIPS: No test for compress_null (compress_null-generic)
- <6>[ 0.194153] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.194231] c0 FIPS: self-tests for non-FIPS md4-generic (md4) passed
- <6>[ 0.194339] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.194405] c0 FIPS: self-tests for non-FIPS md5-generic (md5) passed
- <6>[ 0.194515] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.194584] c0 FIPS: self-tests for sha1-generic (sha1) passed
- <6>[ 0.194689] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.194751] c0 FIPS: self-tests for sha224-generic (sha224) passed
- <6>[ 0.194859] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.194912] c0 FIPS: self-tests for sha256-generic (sha256) passed
- <6>[ 0.195058] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.195277] c0 FIPS: self-tests for sha384-generic (sha384) passed
- <6>[ 0.195388] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.195598] c0 FIPS: self-tests for sha512-generic (sha512) passed
- <6>[ 0.195720] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.195775] c1 FIPS: self-tests for des-generic (des) passed
- <6>[ 0.195885] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.195945] c1 FIPS: self-tests for des3_ede-generic (des3_ede) passed
- <6>[ 0.196059] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.196091] c1 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
- <6>[ 0.196194] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.196283] c1 FIPS: self-tests for aes-generic (aes) passed
- <6>[ 0.196392] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.196424] c1 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
- <6>[ 0.196524] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197030] c1 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
- <6>[ 0.197166] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197251] c1 FIPS: self-tests for crc32c-generic (crc32c) passed
- <6>[ 0.197372] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197405] c1 FIPS: No test for stdrng (krng)
- <6>[ 0.197497] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227952] c1 FIPS: self-tests for ansi_cprng (stdrng) passed
- <6>[ 0.228084] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228116] c1 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
- <6>[ 0.228307] c0 FIPS: self-tests for non-FIPS md5 (md5) passed
- <6>[ 0.228460] c0 FIPS: self-tests for sha1 (sha1) passed
- <6>[ 0.228889] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228981] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229298] c1 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
- <6>[ 0.229882] c0 FIPS: self-tests for ecb(des) (ecb(des)) passed
- <6>[ 0.230298] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230389] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230791] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230924] c1 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
- <6>[ 0.231210] c0 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
- <6>[ 0.231603] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.231693] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.231798] c1 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
- <6>[ 0.232024] c0 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
- <6>[ 0.232411] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232501] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232909] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233018] c1 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
- <6>[ 0.233280] c0 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
- <6>[ 0.233416] c0 FIPS: self-tests for non-FIPS md4 (md4) passed
- <6>[ 0.233543] c0 FIPS: self-tests for sha256 (sha256) passed
- <6>[ 0.233931] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234023] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234239] c1 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
- <6>[ 0.234670] c0 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
- <6>[ 0.235102] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235192] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235607] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235825] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
- <6>[ 0.236298] c1 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
- <6>[ 0.236692] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236784] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236902] c0 FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
- <6>[ 0.237127] c1 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
- <6>[ 0.237519] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237611] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.238016] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.238164] c0 FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
- <6>[ 0.238469] c1 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
- <6>[ 0.238864] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.238956] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.239363] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.239485] c0 FIPS: self-tests for ctr(aes-generic) (ctr(aes)) passed
- <6>[ 0.239754] c1 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
- <6>[ 0.240207] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.240299] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.240712] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.241215] c0 FIPS: self-tests for rfc3686(ctr(aes-generic)) (rfc3686(ctr(aes))) passed
- <6>[ 0.242236] c1 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
- <6>[ 0.242691] c1 FIPS: self-tests for sha384 (sha384) passed
- <6>[ 0.243121] c1 FIPS: self-tests for sha512 (sha512) passed
- <6>[ 0.244000] c1 FIPS: self-tests for non-FIPS deflate (deflate) passed
- <6>[ 0.244439] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244535] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244735] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
- <6>[ 0.245292] c1 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
- <6>[ 0.245474] c1 FIPS: self-tests for crc32c (crc32c) passed
- <6>[ 0.245599] c1 FIPS: self-tests for sha224 (sha224) passed
- <6>[ 0.246003] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246094] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246508] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246883] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-generic)) (cts(cbc(aes))) passed
- <6>[ 0.247646] c1 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
- <6>[ 0.248053] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.248146] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.248291] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
- <6>[ 0.248607] c1 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
- <6>[ 0.249000] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.249091] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.249306] c0 FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
- <6>[ 0.249772] c1 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
- <6>[ 0.250413] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.250505] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.250844] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
- <6>[ 0.251546] c1 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
- <6>[ 0.251940] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.252033] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.252798] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
- <6>[ 0.254350] c1 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
- <6>[ 0.254744] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.254837] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.255621] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
- <6>[ 0.257170] c1 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
- <6>[ 0.257571] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.257663] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.257847] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
- <6>[ 0.258252] c1 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
- <6>[ 0.318314] c1 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
- <6>[ 0.318350] c1 FIPS: do kernel integrity check
- <6>[ 0.542746] c1 FIPS: integrity check passed
- <6>[ 0.542982] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.543049] c1 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
- <6>[ 0.543158] c0 io scheduler noop registered
- <6>[ 0.543185] c0 io scheduler deadline registered
- <6>[ 0.543332] c0 io scheduler cfq registered
- <6>[ 0.543357] c0 io scheduler row registered
- <6>[ 0.543382] c0 io scheduler sio registered (default)
- <3>[ 0.543610] c0 s3cfb s3cfb.0: div(32) max should be 16
- <6>[ 0.543644] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
- <6>[ 0.543733] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
- <6>[ 0.544015] c1 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf28f9000, size: 0x002ee000
- <6>[ 0.546016] c1 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
- <6>[ 0.548837] c1 Bootloader sent 'bootloaderfb' : 5EC00000
- <6>[ 0.549938] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 0.550086] c1 s3cfb s3cfb.0: registered successfully
- <6>[ 0.551042] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
- <6>[ 0.551082] c1 mdnie mdnie: registered successfully
- <6>[ 0.551572] c1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <6>[ 0.865350] c1 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
- <6>[ 0.910093] c1 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
- <6>[ 0.990083] c1 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
- <6>[ 0.993887] c1 console [ttySAC2] enabled
- <6>[ 1.070085] c1 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
- <4>[ 1.115445] c1 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
- <4>[ 1.115484] c1 Mali: mali_dvfs[0].vol = 900000
- <4>[ 1.115512] c1 Mali: init_gpu_vol = 900000
- <4>[ 1.115538] c1 Mali: mali_dvfs[1].vol = 900000
- <4>[ 1.115565] c1 Mali: mali_dvfs[2].vol = 950000
- <4>[ 1.115591] c1 Mali: mali_dvfs[3].vol = 1000000
- <4>[ 1.115687] c1 Mali: init_mali_clock mali_clock c132214c
- <4>[ 1.138557] c1 Initializing gpu clock control interface
- <4>[ 1.138935] c1 Initializing gpu voltage control interface
- <4>[ 1.140282] c0 Mali: Mali device driver loaded
- <4>[ 1.140633] c0 UMP: UMP device driver 0000 loaded
- <6>[ 1.148495] c0 brd: module loaded
- <6>[ 1.152424] c0 loop: module loaded
- <6>[ 1.153061] c0 sec_jack_probe : Registering jack driver
- <6>[ 1.154198] c0 wake enabled for irq 378
- <6>[ 1.154692] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
- <6>[ 1.154753] c0 max8997_muic_cfg_uart_gpio: path=0
- <6>[ 1.154967] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
- <6>[ 1.156019] c0 Loading pn544 driver
- <6>[ 1.156076] c0 pn544_probe : IRQ num 367
- <6>[ 1.156288] c0 pn544_probe : requesting IRQ 367
- <6>[ 1.158113] c0 lcd panel: ld9040_probe : lcdtype : SM2_A2
- <6>[ 1.158146] c0 lcd panel: ld9040 panel driver has been probed.
- <6>[ 1.158320] c0 PPP generic driver version 2.4.2
- <6>[ 1.158647] c0 PPP Deflate Compression module registered
- <6>[ 1.158678] c0 PPP BSD Compression module registered
- <6>[ 1.158730] c0 PPP MPPE Compression module registered
- <6>[ 1.158759] c0 NET: Registered protocol family 24
- <6>[ 1.158789] c0 tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.158818] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.159182] c0 host_notifier host_notifier.0: notifier_prove
- <6>[ 1.159794] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 1.160446] c0 usbcore: registered new interface driver usblp
- <6>[ 1.160479] c0 Initializing USB Mass Storage driver...
- <6>[ 1.160649] c0 usbcore: registered new interface driver usb-storage
- <6>[ 1.160683] c0 USB Mass Storage support registered.
- <6>[ 1.160767] c0 otg pdata e407ed20, irq c0d418e4
- <6>[ 1.161056] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
- <6>[ 1.161094] c0 s3c-udc : version 15 March 2009
- <7>[ 1.161120] c0 init
- <7>[ 1.161626] c0 usb: android_bind disconnect
- <7>[ 1.161652] c0 usb: usb_gadget_disconnect
- <7>[ 1.163660] c1 usb: usb_string_id cdev(0xe438ede0)->next_string_id=1
- <6>[ 1.163829] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.163868] c0 android_usb gadget: Number of LUNs=2
- <6>[ 1.163899] c0 lun0: LUN: removable file: (no medium)
- <6>[ 1.163928] c0 lun1: LUN: removable file: (no medium)
- <7>[ 1.164771] c0 usb: usb_string_id cdev(0xe438ede0)->next_string_id=2
- <7>[ 1.164807] c0 usb: usb_string_id cdev(0xe438ede0)->next_string_id=3
- <7>[ 1.164847] c0 usb: usb_string_id cdev(0xe438ede0)->next_string_id=4
- <7>[ 1.164882] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
- <7>[ 1.164912] c0 usb: composite_bind bcdDevice=0x0
- <7>[ 1.164938] c0 usb: composite_bind composite_manufacturer=
- <6>[ 1.164973] c0 android_usb gadget: android_usb ready
- <6>[ 1.164999] c0 usb: Skip udc_enable
- <6>[ 1.166084] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
- <7>[ 1.166324] c0 [keys]PWR 0
- <6>[ 1.166807] c0 input: sec_touchscreen as /devices/virtual/input/input2
- <6>[ 1.285509] c0 Atmel MXT224 3-004a: family = 0x80, variant = 0x1, version= 0x16, build = 171
- <3>[ 1.285555] c0 [TSP] family = 0x80, variant = 0x1, version = 0x16, build = 171
- <3>[ 1.299702] c0 [TSP] TSP chip is MXT224
- <3>[ 1.370050] c0 [TSP] ta_status is 0
- <3>[ 1.371897] c0 [TSP] mxt224_ta_probe
- <3>[ 1.376055] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
- <3>[ 1.381137] c0 [TSP] calibration success!!!
- <3>[ 1.385227] c0 [TSP] Calibration!!!!!!
- <3>[ 1.388130] c0 [TSP] +mxt224_optical_gain()
- <3>[ 1.610460] c0 [TSP] -mxt224_optical_gain()
- <6>[ 1.640056] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
- <6>[ 1.665053] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
- <6>[ 1.690196] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
- <6>[ 1.691763] c0 using rtc device, max8997-rtc, for alarms
- <6>[ 1.691819] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
- <4>[ 1.692157] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- <6>[ 1.692291] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling
- <4>[ 1.692362] c0 s3c-rtc exynos-rtc: warning: invalid RTC value so initializing it
- <6>[ 1.692618] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
- <6>[ 1.692818] c0 i2c /dev entries driver
- <6>[ 1.695552] c0 lirc_dev: IR Remote Control driver registered, major 250
- <6>[ 1.695589] c0 IR NEC protocol handler initialized
- <6>[ 1.695616] c0 IR RC5(x) protocol handler initialized
- <6>[ 1.695643] c0 IR RC6 protocol handler initialized
- <6>[ 1.695668] c0 IR JVC protocol handler initialized
- <6>[ 1.695694] c0 IR Sony protocol handler initialized
- <6>[ 1.695720] c0 IR RC5 (streamzap) protocol handler initialized
- <6>[ 1.695750] c0 IR LIRC bridge handler initialized
- <6>[ 1.695775] c0 Linux video capture interface: v2.00
- <7>[ 1.696065] c0 [S5K5BAFX] s5k5bafx_create_sysfs
- <6>[ 1.696517] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
- <6>[ 1.696585] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
- <4>[ 1.696751] c0 Initialize JPEG driver
- <4>[ 1.697207] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
- <6>[ 1.697471] c0 s5p_int_src_ext_hpd()
- <6>[ 1.697498] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.697679] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.698101] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
- <4>[ 1.698258] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
- <4>[ 1.698293] c0 i2c-core: driver [s5p_ddc] using legacy resume method
- <6>[ 1.698798] c1 MFC(Multi Function Codec - FIMV v5.x) registered successfully
- <6>[ 1.699688] c1 sii9234_cfg_gpio()
- <6>[ 1.699720] c1 Registered chained gpio int handler for interrupt 111.
- <6>[ 1.699767] c1 Registered interrupt support for gpio group 10.
- <6>[ 1.699802] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.700043] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.700156] c1 sii9234 : create mhl sysfile
- <6>[ 1.700716] c1 input: sii9234_rcp as /devices/virtual/input/input3
- <6>[ 1.701626] c1 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
- <6>[ 1.703327] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
- <6>[ 1.703445] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 1.703846] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
- <6>[ 1.704027] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 1.704721] c0 max17042 9-0036: max17042_probe : is enable (1)
- <6>[ 1.704754] c0 max17042 9-0036: max17042_init_regs
- <6>[ 1.705893] c0 max17042 9-0036: fuel alert soc (2)
- <6>[ 1.705921] c0 max17042 9-0036: max17042_alert_init
- <6>[ 1.707516] c1 wake enabled for irq 371
- <6>[ 1.708628] c1 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
- <6>[ 1.709269] c1 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
- <6>[ 1.709318] c1 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
- <4>[ 1.710354] c0 i2c-core: driver [max17042] using legacy suspend method
- <4>[ 1.710391] c0 i2c-core: driver [max17042] using legacy resume method
- <6>[ 1.711325] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 1.711410] c0 Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.711441] c0 Bluetooth: HCI H4 protocol initialized
- <6>[ 1.711854] c1 max17042 9-0036: max17042_get_soc : soc(0ddd)
- <6>[ 1.711888] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 1.711916] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
- <6>[ 1.711968] c0 cpuidle: using governor ladder
- <6>[ 1.712806] c0 cpuidle: using governor menu
- <6>[ 1.712955] c0 mshci: Mobile Storage Host Controller Interface driver
- <6>[ 1.712990] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
- <6>[ 1.713160] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
- <3>[ 1.713434] c0 mmc0: Version ID 0x5342230a.
- <6>[ 1.716424] c0 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
- <6>[ 1.716883] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
- <6>[ 1.717157] c0 sdhci: Secure Digital Host Controller Interface driver
- <6>[ 1.717191] c0 sdhci: Copyright(c) Pierre Ossman
- <6>[ 1.717311] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
- <6>[ 1.717559] c0 mmc1: vtf_2.8v regulator found
- <3>[ 1.745375] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.749045] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.757082] c0 mmc0: cmd 8 response timeout error
- <3>[ 1.760688] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.765348] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.770018] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.774722] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.779440] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.784208] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.788982] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.793756] c0 mmc0: cmd 55 response timeout error
- <6>[ 1.816799] c1 mmc0: VYL00M: 15010056594c30304d1966b7260f8e0d
- <6>[ 1.865476] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- <6>[ 1.865671] c0 wake enabled for irq 380
- <6>[ 1.865696] c0 mmc1: card inserted.
- <6>[ 1.865793] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
- <3>[ 1.865872] c0 mmc2: no vmmc regulator found
- <6>[ 1.868897] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
- <6>[ 1.874216] c0 usbcore: registered new interface driver usbhid
- <6>[ 1.874250] c0 usbhid: USB HID core driver
- <6>[ 1.874765] c0 logger: created 2048K log 'log_main'
- <6>[ 1.874965] c0 logger: created 256K log 'log_events'
- <6>[ 1.875196] c0 logger: created 1024K log 'log_radio'
- <6>[ 1.875395] c0 logger: created 256K log 'log_system'
- <6>[ 1.875591] c0 logger: created 256K log 'log_sf'
- <6>[ 1.875623] c0 sec_getlog_supply_loggerinfo: 0xc156a958 0xc146a958 0xc142a958 0xc13ea958
- <6>[ 1.876253] c0 zram: num_devices not specified. Using default: 1
- <6>[ 1.876288] c0 zram: Creating 1 devices ...
- <6>[ 1.876975] c0 k3dh_probe: is started.
- <3>[ 1.877305] c0 using defualt position
- <6>[ 1.880061] c0 k3dh_probe: is successful.
- <6>[ 1.880650] c0 input: gyro_sensor as /devices/virtual/input/input4
- <6>[ 1.881567] c0 akm8975_probe is called.
- <6>[ 1.883107] c0 akm8975_probe: asa_x = 170, asa_y = 168, asa_z = 178
- <6>[ 1.883621] c0 Registered sensors device: magnetic_sensor
- <6>[ 1.883663] c0 akm8975_probe is successful.
- <6>[ 1.890811] c0 mmc0 : 00 : 25 : 20110416 : 0.
- <4>[ 1.892150] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.892187] c0 mmc0: power class selection to bus width 8 failed
- <4>[ 1.896965] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.897001] c0 mmc0: power class selection to bus width 8 ddr 2 failed
- <6>[ 1.903878] c0 mmc0: new high speed DDR MMC card at address 0001
- <6>[ 1.904388] c1 mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- <6>[ 1.911388] c1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
- <3>[ 1.940310] c0 cm3663_setup_reg: initial proximity value = 1
- <6>[ 1.944513] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.944881] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.945702] c1 input: proximity_sensor as /devices/virtual/input/input5
- <6>[ 1.948313] c0 input: light_sensor as /devices/virtual/input/input6
- <6>[ 1.948830] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.949164] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.949496] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.949830] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.952406] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
- <6>[ 1.952532] c0 audss_init: RCLK SRC[busclk]
- <6>[ 1.952628] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <7>[ 1.952849] c0 pmu_debug: 0x00000900
- <6>[ 1.963327] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.963369] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
- <7>[ 1.963405] c0 i2s_txctrl: Turn Off - spr is no active
- <6>[ 1.963449] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.963483] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.974789] c0 mmc1: new high speed SD card at address 0001
- <6>[ 1.975330] c0 mmcblk1: mmc1:0001 00000 1.89 GiB
- <6>[ 1.976594] c1 mmcblk1: p1
- <6>[ 2.029628] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
- <6>[ 2.030717] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
- <6>[ 2.038466] c0 SRP: Driver successfully probed
- <6>[ 2.038684] c0 ALSA device list:
- <6>[ 2.038708] c0 #0: U1-YMU823
- <6>[ 2.038860] c0 GACT probability NOT on
- <6>[ 2.038890] c0 Mirror/redirect action on
- <6>[ 2.038916] c0 u32 classifier
- <6>[ 2.038935] c0 Actions configured
- <6>[ 2.038959] c0 Netfilter messages via NETLINK v0.30.
- <6>[ 2.039042] c0 nf_conntrack version 0.5.0 (12410 buckets, 49640 max)
- <6>[ 2.039960] c0 ctnetlink v0.93: registering with nfnetlink.
- <6>[ 2.040063] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 2.040104] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 2.040499] c0 xt_time: kernel timezone is -0000
- <6>[ 2.042051] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.042232] c0 arp_tables: (C) 2002 David S. Miller
- <6>[ 2.042307] c0 TCP cubic registered
- <6>[ 2.043483] c0 NET: Registered protocol family 10
- <6>[ 2.046288] c0 Mobile IPv6
- <6>[ 2.046336] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.046564] c0 IPv6 over IPv4 tunneling driver
- <6>[ 2.051362] c0 NET: Registered protocol family 17
- <6>[ 2.051417] c0 NET: Registered protocol family 15
- <6>[ 2.051555] c1 Bluetooth: RFCOMM TTY layer initialized
- <6>[ 2.051600] c1 Bluetooth: RFCOMM socket layer initialized
- <6>[ 2.051632] c1 Bluetooth: RFCOMM ver 1.11
- <6>[ 2.051658] c1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 2.051691] c1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 2.051958] c1 NET: Registered protocol family 35
- <5>[ 2.052509] c1 Registering the dns_resolver key type
- <6>[ 2.052567] c1 EXYNOS4210: Adaptive Support Voltage init
- <6>[ 2.052796] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
- <6>[ 2.053347] c0 EXYNOS4: HPM value = 20
- <6>[ 2.053403] c0 EXYNOS4: IDS value = 30
- <6>[ 2.053427] c0 <6>Support 1.2GHz
- <6>[ 2.053448] c0 <6>ASV Group for This Exynos4210 is 0x40000004
- <6>[ 2.053487] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
- <5>[ 2.053551] c0 Registering SWP/SWPB emulation handler
- <6>[ 2.053626] c0 DVFS : VDD_ARM Voltage table set with 4 Group
- <6>[ 2.053659] c0 max8997_set_arm_voltage_table
- <6>[ 2.053691] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[0]=1300000, buck1_vol[1]=26
- <6>[ 2.053892] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1250000, buck1_vol[2]=24
- <6>[ 2.054086] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1150000, buck1_vol[3]=20
- <6>[ 2.054278] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1050000, buck1_vol[4]=16
- <6>[ 2.054470] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[5]=13
- <6>[ 2.054662] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[6]=12
- <6>[ 2.054857] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
- <4>[ 2.055423] c1 ------------[ cut here ]------------
- <4>[ 2.055465] c1 WARNING: at /home/arny/DirtyUnicorns/kernel/samsung/smdk4412/fs/sysfs/dir.c:455 sysfs_add_one+0xa4/0xc4()
- <4>[ 2.055519] c1 sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'
- <4>[ 2.055570] c1 Modules linked in:
- <4>[ 2.055592] c1 Backtrace:
- <4>[ 2.055631] c1 [<c0a6f7a0>] (dump_backtrace+0x0/0x10c) from [<c0fec4d8>] (dump_stack+0x18/0x1c)
- <4>[ 2.055674] c1 r7:000001c7 r6:c1125af0 r5:00000009 r4:e4043ed0
- <4>[ 2.055730] c1 [<c0fec4c0>] (dump_stack+0x0/0x1c) from [<c0aa8f30>] (warn_slowpath_common+0x5c/0x6c)
- <4>[ 2.055784] c1 [<c0aa8ed4>] (warn_slowpath_common+0x0/0x6c) from [<c0aa8f78>] (warn_slowpath_fmt+0x38/0x40)
- <4>[ 2.055832] c1 r9:00000000 r8:00000000 r7:e4043f18 r6:e43c7de0 r5:e4227000
- <4>[ 2.055877] c1 r4:c1125b30
- <4>[ 2.055904] c1 [<c0aa8f40>] (warn_slowpath_fmt+0x0/0x40) from [<c0b90d58>] (sysfs_add_one+0xa4/0xc4)
- <4>[ 2.055948] c1 r3:e4227000 r2:c1125b30
- <4>[ 2.055975] c1 r4:ffffffef
- <4>[ 2.056001] c1 [<c0b90cb4>] (sysfs_add_one+0x0/0xc4) from [<c0b8fe84>] (sysfs_add_file_mode+0x4c/0xac)
- <4>[ 2.056046] c1 r7:00000013 r6:e28ef150 r5:c13680e4 r4:e43c7de0
- <4>[ 2.056092] c1 [<c0b8fe38>] (sysfs_add_file_mode+0x0/0xac) from [<c0b8ff14>] (sysfs_create_file+0x30/0x44)
- <4>[ 2.056138] c1 r6:c0aad238 r5:e28f3714 r4:c135169c
- <4>[ 2.056182] c1 [<c0b8fee4>] (sysfs_create_file+0x0/0x44) from [<c0cf0cf8>] (create_standard_UV_interfaces+0x54/0x58)
- <4>[ 2.056244] c1 [<c0cf0ca4>] (create_standard_UV_interfaces+0x0/0x58) from [<c0dd571c>] (cpufreq_register_driver+0x150/0x184)
- <4>[ 2.056297] c1 r5:00000000 r4:c13e99c4
- <4>[ 2.056335] c1 [<c0dd55cc>] (cpufreq_register_driver+0x0/0x184) from [<c000f9b4>] (exynos_cpufreq_init+0x150/0x1b0)
- <4>[ 2.056385] c1 r7:00000013 r6:c0aad238 r5:c13c0330 r4:c13c0330
- <4>[ 2.056436] c1 [<c000f864>] (exynos_cpufreq_init+0x0/0x1b0) from [<c0a65924>] (do_one_initcall+0x124/0x17c)
- <4>[ 2.056484] c1 r5:e4042020 r4:c13bfd80
- <4>[ 2.056517] c1 [<c0a65800>] (do_one_initcall+0x0/0x17c) from [<c0008ad8>] (kernel_init+0xcc/0x154)
- <4>[ 2.056568] c1 [<c0008a0c>] (kernel_init+0x0/0x154) from [<c0aad238>] (do_exit+0x0/0x720)
- <4>[ 2.056621] c1 ---[ end trace dc840f0d0155ffc7 ]---
- <6>[ 2.056655] c1 DVFS : VDD_INT Voltage table set with 4 Group
- <6>[ 2.057046] c1 exynos4_pm_hotplug_device_init: 0
- <6>[ 2.057074] c1 EXYNOS4 PM-hotplug init function
- <7>[ 2.057663] c1 mif: set_hsic_lpa_states: 281: called(s5p_usb_phy_init+0x150/0x5b0):
- <6>[ 2.057706] c1 s5p-ehci s5p-ehci: usb phy usage(2)
- <6>[ 2.057851] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <6>[ 2.058175] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <6>[ 2.058326] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <6>[ 2.065094] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- <6>[ 2.065189] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 2.065231] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 2.065272] c1 usb usb1: Product: S5P EHCI Host Controller
- <6>[ 2.065303] c1 usb usb1: Manufacturer: Linux 3.0.101r4-AOSP-LP-Kernel+ ehci_hcd
- <6>[ 2.065342] c1 usb usb1: SerialNumber: s5p-ehci
- <6>[ 2.065936] c1 hub 1-0:1.0: USB hub found
- <6>[ 2.065973] c1 hub 1-0:1.0: 3 ports detected
- <6>[ 2.066326] c1 CP not ready, Active State low
- <6>[ 2.066464] c1 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
- <6>[ 2.066505] c1 @@@ get_refresh_interval = 0x2e
- <6>[ 2.066530] c1 @@@ get_refresh_interval = 0x5d
- <6>[ 2.066564] c1 ** temperature set value **
- <6>[ 2.066585] c1 1st throttling stop_temp = 61, start_temp = 64
- <6>[ 2.066615] c1 2nd throttling stop_temp = 87, start_tmep = 103
- <6>[ 2.066645] c1 tripping temp = 110, s/w emergency temp = 120
- <6>[ 2.066678] c1 mem throttling stop_temp = 80, start_temp = 85
- <6>[ 2.066827] c0 exynos4210_tmu_init: triminfo = 0x0000004d, low 8bit = 0x4d, high 24 bit = 0x000000
- <6>[ 2.066883] c0 THD_TEMP:0x71: TRIG_LEV0: 0x03
- <6>[ 2.066906] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
- <6>[ 2.117119] c0 [MODEM_IF] init_modem
- <3>[ 2.117157] c0 check phone active = 94
- <6>[ 2.119451] c0 umts_modem_cfg_gpio done
- <6>[ 2.119484] c0 modem_link_pm_config_gpio done
- <3>[ 2.119741] c0 mif: modem_probe: modem_if
- <6>[ 2.124385] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
- <6>[ 2.124576] c0 wake enabled for irq 366
- <6>[ 2.124602] c0 mif: create_modemctl_device: xmm6260 is created!!!
- <6>[ 2.125111] c0 wake enabled for irq 361
- <6>[ 2.125425] c1 usbcore: registered new interface driver cdc_modem
- <6>[ 2.125473] c1 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe43ff000)
- <6>[ 2.125511] c1 mif: hsic_create_link_device: usb : create_link_device DONE
- <3>[ 2.125549] c1 mif: modem_probe: link created: usb
- <6>[ 2.129269] c1 mif: create_io_device: Bood device = umts_boot0
- <6>[ 2.138550] c1 mif: modem_probe: Complete!!!
- <4>[ 2.140532] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
- <6>[ 2.142059] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
- <6>[ 2.142241] c0 otg host_probe start c0d2f314
- <6>[ 2.345073] c1 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <7>[ 2.345152] c1 [TouchKey] i2c_touchkey_probe
- <6>[ 2.345471] c1 input: sec_touchkey as /devices/virtual/input/input7
- <7>[ 2.400583] c1 [TouchKey] Module Version: 12
- <6>[ 2.400614] c1 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <6>[ 2.402695] c0 max8997-rtc max8997-rtc: setting system clock to 2015-11-09 08:29:16 UTC (1447057756)
- <6>[ 2.402833] c0 ctrl->mem.size = 0x500000
- <6>[ 2.402856] c0 ctrl->mem.base = 0x70f3c000
- <6>[ 2.402974] c0
- <6>[ 2.402986] c0
- <6>[ 2.402996] c0
- <6>[ 2.403007] c0 cam_cfg_gpio: pdev->id=0
- <6>[ 2.403332] c0 FIMC0 registered successfully
- <6>[ 2.403452] c1 ctrl->mem.size = 0x0
- <6>[ 2.403475] c1 ctrl->mem.base = 0xffffffea
- <6>[ 2.403789] c1 FIMC1 registered successfully
- <6>[ 2.403911] c0 ctrl->mem.size = 0x1900000
- <6>[ 2.403936] c0 ctrl->mem.base = 0x6f63c000
- <6>[ 2.404245] c0 FIMC2 registered successfully
- <6>[ 2.404363] c1 ctrl->mem.size = 0x700000
- <6>[ 2.404387] c1 ctrl->mem.base = 0x6ef3c000
- <6>[ 2.404687] c1 FIMC3 registered successfully
- <6>[ 2.404928] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
- <6>[ 2.428099] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- <6>[ 2.428142] c0 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
- <6>[ 2.428568] c0 sec_bat_get_lpcharging_state: LP charging:0
- <4>[ 2.429272] c0 Initializing charge current control interface
- <6>[ 2.429624] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
- <6>[ 2.429899] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 2.430045] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 2.430577] c1 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=890
- <6>[ 2.430626] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 2.430688] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 2.430735] c1 sec-battery sec-battery: soc(13), vfocv(3729), vcell(3628), temp(29), charging(2), health(1), chg_adc(0)
- <4>[ 2.431840] c0 Warning: unable to open an initial console.
- <6>[ 2.433619] c0 Freeing init memory: 10612K
- <7>[ 2.573521] c1 SELinux: 2048 avtab hash slots, 4741 rules.
- <7>[ 2.575854] c1 SELinux: 2048 avtab hash slots, 4741 rules.
- <7>[ 2.575900] c1 SELinux: 1 users, 2 roles, 386 types, 0 bools, 1 sens, 1024 cats
- <7>[ 2.575943] c1 SELinux: 86 classes, 4741 rules
- <7>[ 2.577280] c1 SELinux: Completing initialization.
- <7>[ 2.577310] c1 SELinux: Setting up existing superblocks.
- <7>[ 2.577359] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 2.577412] c1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 2.577963] c1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 2.578016] c1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 2.578075] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.578135] c1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 2.578622] c1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 2.578669] c1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 2.578711] c1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 2.578767] c1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 2.578822] c1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 2.578941] c1 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
- <7>[ 2.578987] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.579051] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <5>[ 2.691025] c1 type=1403 audit(1447057756.785:2): policy loaded auid=4294967295 ses=4294967295
- <6>[ 2.736017] c1 sec_bat_get_lpcharging_state: LP charging:0
- <3>[ 2.744198] c1 healthd: wakealarm_init: timerfd_create failed
- <4>[ 2.751473] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 2.815843] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 2.830960] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 2.892688] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 2.894292] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 2.895908] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <6>[ 2.896241] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <4>[ 2.897740] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <6>[ 3.115058] c1 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 3.115298] c1 exynos4_handler_tmu_state: inform to init state to platform.
- <3>[ 3.124778] c1 init: /dev/hw_random not found
- <7>[ 3.136231] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 3.136568] c1 init: /dev/hw_random not found
- <7>[ 3.142388] c1 usb: enable_store enabled=0, !dev->enabled=1
- <7>[ 3.142421] c1 usb: usb_gadget_disconnect
- <7>[ 3.142683] c1 usb: functions_store buff=mtp,adb
- <7>[ 3.142714] c1 usb: android_enable_function name=mtp
- <7>[ 3.142744] c1 usb: android_enable_function name=adb
- <3>[ 3.143102] c1 init: Unable to open persistent property directory /data/property errno: 2
- <3>[ 3.154755] c1 init: Warning! Service recovery needs a SELinux domain defined; please fix!
- <5>[ 3.162901] c0 type=1400 audit(1447057757.255:3): avc: denied { write } for pid=1860 comm="toolbox" name="enforce" dev=selinuxfs ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file
- <6>[ 3.162997] c1 mdnie mdnie: scenario_store :: value=0
- <6>[ 3.163033] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
- <6>[ 3.163149] c1 mdnie mdnie: mode_store :: value=1
- <6>[ 3.163183] c1 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
- <7>[ 3.163338] c1 usb: enable_store enabled=0, !dev->enabled=1
- <7>[ 3.163371] c1 usb: usb_gadget_disconnect
- <5>[ 3.164428] c0 type=1400 audit(1447057757.255:4): avc: denied { execmem } for pid=1861 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process
- <7>[ 3.164832] c1 usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 3.164868] c1 usb: enable_store vendor=18d1,product=4ee2,bcdDevice=226
- <7>[ 3.164904] c1 ,Class=0,SubClass=0,Protocol=0
- <7>[ 3.164929] c1 usb: enable_store next cmd : usb_add_config
- <6>[ 3.166848] c0 failed to copy MFC F/W during init
- <6>[ 3.175295] c0 adb_open
- <7>[ 3.175327] c0 usb: android_bind_enabled_functions f:mtp
- <6>[ 3.175364] c0 mtp_bind_config
- <7>[ 3.175388] c0 usb: usb_string_id cdev(0xe438ede0)->next_string_id=1
- <7>[ 3.175448] c0 usb: android_bind_enabled_functions f:adb
- <6>[ 3.175481] c0 adb_bind_config
- <7>[ 3.175518] c0 usb: usb_gadget_connect
- <5>[ 3.190508] c1 type=1400 audit(1447057757.285:5): avc: denied { execute } for pid=1861 comm="recovery" path="/dev/__properties__" dev=tmpfs ino=1562 scontext=u:r:init:s0 tcontext=u:object_r:properties_device:s0 tclass=file
- <6>[ 3.197074] c1 lcd panel: id=2 brightness=255, bl=20, candela=300
- <5>[ 3.201505] c1 type=1400 audit(1447057757.295:6): avc: denied { execute } for pid=1861 comm="recovery" path="/dev/graphics/fb0" dev=tmpfs ino=284 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file
- <5>[ 3.280074] c1 type=1400 audit(1447057757.370:7): avc: denied { execute } for pid=1861 comm="recovery" path="/dev/ashmem" dev=tmpfs ino=430 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file
- <3>[ 3.287348] c1 [TSP] sec_touchscreen_enable
- <3>[ 3.287942] c0 [TSP] Calibration End!!!!!!
- <5>[ 3.294386] c1 type=1400 audit(1447057757.390:8): avc: denied { rename } for pid=1861 comm="recovery" name="recovery.fstab" dev=rootfs ino=1155 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <6>[ 3.340223] c1 EXT4-fs (mmcblk0p7): recovery complete
- <6>[ 3.340263] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.340327] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
- <6>[ 3.377618] c1 EXT4-fs (mmcblk0p10): recovery complete
- <6>[ 3.377658] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.377715] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 3.450293] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 3.450831] c1 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=877
- <6>[ 3.450879] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 3.450947] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 3.450993] c1 sec-battery sec-battery: soc(13), vfocv(3729), vcell(3628), temp(29), charging(2), health(1), chg_adc(0)
- <4>[ 3.452477] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <5>[ 3.550536] c1 type=1400 audit(1447057757.645:9): avc: denied { create } for pid=1861 comm="recovery" name="fstab" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <5>[ 3.550647] c1 type=1400 audit(1447057757.645:10): avc: denied { write } for pid=1861 comm="recovery" name="fstab" dev=rootfs ino=1698 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
- <7>[ 3.566631] c1 SELinux: initialized (dev mmcblk0p11, type vfat), uses genfs_contexts
- <6>[ 3.642640] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.642702] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 3.688982] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.689040] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <7>[ 3.734239] c1 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 4.150384] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 4.153380] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 4.160173] c0 max8997-muic max8997-muic: max8997_muic_init_detect
- <6>[ 4.160473] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 4.160565] c0 max8997-muic max8997-muic: detect_dev: DETACHED
- <6>[ 4.160766] c0 max8997-muic max8997-muic: handle_detach: UNKNOWN
- <6>[ 4.160846] c0 max8997-muic max8997-muic: detach_charger
- <3>[ 4.160952] c0 [TSP] mxt224_ta_probe
- <3>[ 4.163638] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
- <6>[ 4.168334] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(0)
- <6>[ 4.168474] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
- <6>[ 4.168856] c0 max8922-charger max8922-charger: max8922_enable_charging: disable charging,TA
- <6>[ 4.470106] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 4.470539] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 4.471266] c1 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=877
- <6>[ 4.471399] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 4.471593] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 4.471690] c1 sec-battery sec-battery: soc(13), vfocv(3729), vcell(3628), temp(29), charging(2), health(1), chg_adc(0)
- <4>[ 4.473170] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 4.473911] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 4.475363] c0 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <7>[ 4.901787] c1 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 5.450354] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 5.450853] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=874
- <6>[ 5.450892] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 5.450947] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 5.450984] c0 sec-battery sec-battery: soc(13), vfocv(3729), vcell(3628), temp(29), charging(2), health(1), chg_adc(0)
- <4>[ 5.452172] c0 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <6>[ 5.721195] c0 mtp_open
- <6>[ 6.450979] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 6.451871] c0 sec-battery sec-battery: sec_bat_check_temper: temp=290, adc=883
- <6>[ 6.452042] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 6.452251] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <6>[ 6.452407] c0 sec-battery sec-battery: soc(13), vfocv(3729), vcell(3628), temp(29), charging(2), health(1), chg_adc(0)
- <4>[ 6.458161] c0 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <6>[ 11.808716] c1 max17042 9-0036: max17042_get_soc : soc(0ddd)
- <6>[ 11.808829] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 11.808929] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
- <6>[ 12.450688] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <7>[ 16.200295] c0 usb: usb_ready udc_enable=0
- <6>[ 18.160364] c0 max8997-muic max8997-muic: max8997_muic_usb_detect
- <6>[ 21.903884] c1 max17042 9-0036: max17042_get_soc : soc(0ddd)
- <6>[ 21.903994] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 21.904091] c1 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
- <6>[ 22.500664] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 26.240262] c0 max8997-muic max8997-muic: max8997_muic_mhl_detect
- <3>[ 26.400292] c0 [HOTPLUG OUT] check_down 200000<=200000 && 100<100
- <3>[ 26.405091] c0 CPU_DOWN 1
- <4>[ 26.414132] c1 migrate_irqs: 30 callbacks suppressed
- <4>[ 26.414228] c1 IRQ112 no longer affine to CPU1
- <5>[ 26.415025] c0 CPU1: shutdown
- <3>[ 29.350124] c0 [HOTPLUG IN] check_up 1200000>=500000 && 200>100
- <3>[ 29.355887] c0 CPU_UP 3
- <4>[ 29.381228] c1 CPU1: Booted secondary processor
- <4>[ 29.381251] c1 CPU1: Booted secondary processor
- <6>[ 29.381315] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 29.385033] c1 Switched to NOHz mode on CPU #1
- <6>[ 30.240225] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=390
- <6>[ 33.804005] c0 max17042 9-0036: max17042_get_soc : soc(0ddd)
- <6>[ 33.804122] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 33.804234] c0 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
- <6>[ 33.805115] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 33.805491] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 35.272177] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 38.703597] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
- <6>[ 38.704375] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:449
- <6>[ 38.705153] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x48
- <4>[ 38.705282] c0 max8997-muic max8997-muic: detect_dev: charger det run, ignore
- <6>[ 38.705670] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 38.705795] c0 max8997 5-0066: Unused interrupt source: 0x0
- <6>[ 38.790287] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
- <6>[ 38.791044] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:445
- <6>[ 38.791694] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
- <6>[ 38.791820] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
- <6>[ 38.791944] c0 max8997-muic max8997-muic: attach_usb
- <6>[ 38.792044] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
- <3>[ 38.792188] c0 [TSP] mxt224_ta_probe
- <3>[ 38.795402] c0 [TSP]TA_probe MXT224 T9 Byte7 is 70
- <6>[ 38.799652] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
- <6>[ 38.799916] c1 max8997-charger max8997-charger: max8997_disable_charging: disable charging
- <6>[ 38.800428] c0 max8997-muic max8997-muic: switch_to_ap_usb
- <6>[ 38.800566] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
- <6>[ 38.801328] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
- <6>[ 38.802499] c0 otg max8997_muic_usb_cb: usb mode=1
- <6>[ 38.802603] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
- <7>[ 38.802751] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
- <7>[ 38.802858] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
- <7>[ 38.803205] c0 usb: s5p_usb_phy0_tune read original tune
- <7>[ 38.803308] c0 usb: s5p_usb_phy0_tune save default phytune (0x819b3)
- <7>[ 38.803417] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
- <7>[ 38.803520] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
- <7>[ 38.803643] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
- <7>[ 38.803742] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
- <6>[ 38.805359] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 38.805481] c0 max8997 5-0066: Unused interrupt source: 0x0
- <6>[ 38.852921] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
- <6>[ 38.853774] c0 max8997-charger max8997-charger: max8997_chg_charger_irq: charger IRQ(1) occurred!
- <6>[ 38.854366] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 38.854488] c0 max8997 5-0066: Unused interrupt source: 0x0
- <7>[ 39.021639] c0 usb: GET_DES
- <7>[ 39.021841] c0 usb: android_work config= (null),connected=1,sw_connected=0
- <7>[ 39.022807] c0 usb: android_work sent uevent USB_STATE=CONNECTED
- <7>[ 39.050122] c0 usb: GET_DES
- <7>[ 39.054256] c0 usb: GET_DES
- <7>[ 39.059564] c0 usb: GET_DES
- <6>[ 39.061156] c0 android_usb gadget: high speed config #1: android
- <7>[ 39.061333] c0 usb: SET_CON
- <7>[ 39.061539] c0 usb: android_work config=c1356964,connected=1,sw_connected=1
- <7>[ 39.062238] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
- <7>[ 39.064352] c0 usb: GET_DES
- <7>[ 39.071118] c0 usb: GET_DES
- <6>[ 39.105238] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <4>[ 39.110809] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=2 c=0 chg=u
- <4>[ 39.115485] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=2 c=0 chg=u
- <7>[ 39.350763] c0 usb: GET_DES
- <7>[ 39.732155] c0 usb: reset
- <6>[ 39.732401] c0 adb_release
- <7>[ 39.732473] c0 usb: usb_gadget_disconnect
- <7>[ 39.732574] c0 usb: usb_remove_config cdev->config= (null), config=c1356964
- <7>[ 39.733104] c0 usb: android_work config= (null),connected=0,sw_connected=1
- <6>[ 39.733236] c1 adb_open
- <7>[ 39.733286] c1 usb: android_bind_enabled_functions f:mtp
- <6>[ 39.733388] c1 mtp_bind_config
- <7>[ 39.733496] c1 usb: android_bind_enabled_functions f:adb
- <6>[ 39.733585] c1 adb_bind_config
- <7>[ 39.733679] c1 usb: usb_gadget_connect
- <6>[ 39.734076] c0 mtp_release
- <6>[ 39.734190] c0 mtp_open
- <7>[ 39.734279] c0 usb: reset
- <7>[ 39.734517] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
- <7>[ 39.734628] c0 usb: android_work config= (null),connected=0,sw_connected=0
- <7>[ 39.734749] c0 usb: android_work did not send uevent (0 0 (null))
- <6>[ 39.762809] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
- <6>[ 39.763593] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:445
- <6>[ 39.764283] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 39.764418] c0 max8997-muic max8997-muic: detect_dev: DETACHED
- <6>[ 39.764876] c0 max8997-muic max8997-muic: detach_usb: acc_type(0xb)
- <6>[ 39.765002] c0 max8997-muic max8997-muic: detach_charger
- <3>[ 39.765201] c0 [TSP] mxt224_ta_probe
- <3>[ 39.768394] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
- <6>[ 39.772577] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(0)
- <6>[ 39.772757] c0 max8997-muic max8997-muic: set_accdet(dis) cntl2(0x00)
- <6>[ 39.772896] c1 max8997-charger max8997-charger: max8997_disable_charging: disable charging
- <6>[ 39.773865] c0 max8922-charger max8922-charger: max8922_enable_charging: disable charging,USB
- <6>[ 39.775132] c0 max8997-muic max8997-muic: set_com_sw(0x00)
- <6>[ 39.776581] c0 otg max8997_muic_usb_cb: usb mode=0
- <6>[ 39.776684] c0 otg change mode : USB Cable Attached --> USB Cable Detached (1 --> 0) enabled
- <7>[ 39.776833] c0 usb: s3c_vbus_enable, ready u_e: 1, is_active: 0
- <7>[ 39.776952] c0 usb: s3c_vbus_enable is_active=0(udc_disable)
- <7>[ 39.777132] c0 usb: s5p_usb_phy0_tune read original tune
- <7>[ 39.777233] c0 usb: s5p_usb_phy0_tune original tune=0x1829bb
- <7>[ 39.777345] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
- <7>[ 39.777481] c0 usb: s5p_usb_phy0_tune set defult tune=0x819b3
- <7>[ 39.777587] c0 usb: s5p_usb_phy0_tune modified tune=0x819b3
- <6>[ 39.777717] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:449
- <7>[ 39.777918] c0 usb: android_work config= (null),connected=0,sw_connected=0
- <7>[ 39.778075] c0 usb: android_work did not send uevent (0 0 (null))
- <6>[ 39.778418] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x0
- <6>[ 39.778547] c0 max8997-muic max8997-muic: detect_dev: DETACHED
- <6>[ 39.778993] c0 max8997-muic max8997-muic: handle_detach: duplicated(NONE)
- <6>[ 39.779587] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 39.779713] c0 max8997 5-0066: Unused interrupt source: 0x0
- <6>[ 39.793319] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
- <6>[ 39.793784] c0 max8997-charger max8997-charger: max8997_chg_charger_irq: charger IRQ(0) occurred!
- <6>[ 39.794413] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 39.794547] c0 max8997 5-0066: Unused interrupt source: 0x0
- <6>[ 40.075135] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3
- <4>[ 40.081491] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <4>[ 40.085953] c1 healthd: battery l=13 v=3628 t=29.0 h=2 st=3 c=0 chg=
- <6>[ 40.887492] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
- <6>[ 40.888241] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:449
- <6>[ 40.888890] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x48
- <4>[ 40.889034] c0 max8997-muic max8997-muic: detect_dev: charger det run, ignore
- <6>[ 40.889617] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 40.889747] c0 max8997 5-0066: Unused interrupt source: 0x0
- <6>[ 40.974212] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x8
- <6>[ 40.974965] c0 max8997-muic max8997-muic: max8997_muic_irq: irq:445
- <6>[ 40.975465] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
- <6>[ 40.975603] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
- <6>[ 40.975733] c0 max8997-muic max8997-muic: attach_usb
- <6>[ 40.975832] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
- <3>[ 40.975964] c0 [TSP] mxt224_ta_probe
- <3>[ 40.978953] c0 [TSP]TA_probe MXT224 T9 Byte7 is 70
- <6>[ 40.983573] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
- <6>[ 40.983813] c1 max8997-charger max8997-charger: max8997_disable_charging: disable charging
- <6>[ 40.984474] c0 max8997-muic max8997-muic: switch_to_ap_usb
- <6>[ 40.984620] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
- <6>[ 40.985385] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
- <6>[ 40.986552] c0 otg max8997_muic_usb_cb: usb mode=1
- <6>[ 40.986665] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
- <7>[ 40.986817] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
- <7>[ 40.986925] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
- <7>[ 40.987262] c0 usb: s5p_usb_phy0_tune read original tune
- <7>[ 40.987369] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
- <7>[ 40.987471] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
- <7>[ 40.987599] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
- <7>[ 40.987710] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
- <6>[ 40.989323] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 40.989445] c0 max8997 5-0066: Unused interrupt source: 0x0
- <6>[ 41.036514] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2
- <6>[ 41.037382] c0 max8997-charger max8997-charger: max8997_chg_charger_irq: charger IRQ(1) occurred!
- <6>[ 41.037998] c0 max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0
- <4>[ 41.038131] c0 max8997 5-0066: Unused interrupt source: 0x0
- <7>[ 41.120953] c0 usb: GET_DES
- <7>[ 41.121148] c0 usb: android_work config= (null),connected=1,sw_connected=0
- <7>[ 41.121833] c0 usb: android_work sent uevent USB_STATE=CONNECTED
- <7>[ 41.149117] c0 usb: GET_DES
- <7>[ 41.222582] c0 usb: GET_DES
- <6>[ 41.227601] c0 android_usb gadget: high speed config #1: android
- <7>[ 41.227763] c0 usb: SET_CON
- <7>[ 41.227937] c0 usb: android_work config=c1356964,connected=1,sw_connected=1
- <7>[ 41.229169] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
- <6>[ 41.290251] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <4>[ 41.296391] c0 healthd: battery l=13 v=3628 t=29.0 h=2 st=2 c=0 chg=u
- <4>[ 41.301111] c0 healthd: battery l=13 v=3628 t=29.0 h=2 st=2 c=0 chg=u
- <6>[ 43.903792] c0 max17042 9-0036: max17042_get_soc : soc(0de9)
- <6>[ 43.903905] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 43.904003] c0 max17042 9-0036: max17042_get_soc : use raw (13), soc (13)
- <6>[ 43.905458] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 45.480707] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 46.601026] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 46.601925] c0 sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=863
- <6>[ 46.602109] c0 sec-battery sec-battery: Time past : 5 secs
- <6>[ 46.602233] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 46.602398] c0 sec-battery sec-battery: soc(13), vfocv(3730), vcell(4032), temp(31), charging(1), health(1), chg_adc(0)
- <4>[ 46.608438] c0 healthd: battery l=13 v=4032 t=31.0 h=2 st=2 c=0 chg=u
- <3>[ 47.900290] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 47.904846] c0 CPU_DOWN 1
- <4>[ 47.913995] c1 IRQ112 no longer affine to CPU1
- <5>[ 47.914801] c0 CPU1: shutdown
- <6>[ 48.615803] c0 [VIB] vibrator_work: pwm_config duty=28230
- <7>[ 48.671479] c0 usb: enable_store enabled=0, !dev->enabled=0
- <7>[ 48.671560] c0 usb: usb_gadget_disconnect
- <7>[ 48.671700] c0 usb: usb_remove_config cdev->config= (null), config=c1356964
- <6>[ 48.676205] c0 adb_release
- <6>[ 48.676422] c0 mtp_release
- <6>[ 48.676536] c0 mtp_open
- <7>[ 48.676627] c0 usb: android_work config= (null),connected=0,sw_connected=1
- <7>[ 48.681382] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
- <6>[ 48.686224] c0 mtp_release
- <7>[ 48.687522] c0 usb: enable_store enabled=0, !dev->enabled=1
- <7>[ 48.687599] c0 usb: usb_gadget_disconnect
- <7>[ 48.687766] c0 usb: functions_store buff=adb
- <7>[ 48.687833] c0 usb: android_enable_function name=adb
- <7>[ 48.687997] c0 usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 48.688075] c0 usb: enable_store vendor=18d1,product=d002,bcdDevice=226
- <7>[ 48.688162] c0 ,Class=0,SubClass=0,Protocol=0
- <7>[ 48.688221] c0 usb: enable_store next cmd : usb_add_config
- <6>[ 48.721684] c0 adb_open
- <7>[ 48.721705] c0 usb: android_bind_enabled_functions f:adb
- <6>[ 48.721730] c0 adb_bind_config
- <7>[ 48.721757] c0 usb: usb_gadget_connect
- <7>[ 48.740798] c0 usb: enable_store enabled=0, !dev->enabled=0
- <7>[ 48.740826] c0 usb: usb_gadget_disconnect
- <7>[ 48.740853] c0 usb: usb_remove_config cdev->config= (null), config=c1356964
- <7>[ 48.746102] c0 usb: functions_store buff=mass_storage,adb
- <7>[ 48.746131] c0 usb: android_enable_function name=mass_storage
- <7>[ 48.746160] c0 usb: android_enable_function name=adb
- <7>[ 48.746222] c0 usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 48.746249] c0 usb: enable_store vendor=18d1,product=d002,bcdDevice=226
- <7>[ 48.746279] c0 ,Class=0,SubClass=0,Protocol=0
- <7>[ 48.746300] c0 usb: enable_store next cmd : usb_add_config
- <7>[ 48.746326] c0 usb: android_bind_enabled_functions f:mass_storage
- <7>[ 48.746360] c0 usb: android_bind_enabled_functions f:adb
- <6>[ 48.746384] c0 adb_bind_config
- <7>[ 48.746404] c0 usb: usb_gadget_connect
- <6>[ 48.750932] c0 adb_release
- <7>[ 48.750987] c0 usb: usb_gadget_disconnect
- <7>[ 48.751052] c0 usb: usb_remove_config cdev->config= (null), config=c1356964
- <6>[ 48.751563] c0 adb_open
- <7>[ 48.751603] c0 usb: android_bind_enabled_functions f:mass_storage
- <7>[ 48.751692] c0 usb: android_bind_enabled_functions f:adb
- <6>[ 48.751750] c0 adb_bind_config
- <7>[ 48.751797] c0 usb: usb_gadget_connect
- <7>[ 48.900604] c0 usb: GET_DES
- <7>[ 48.900687] c0 usb: android_work config= (null),connected=1,sw_connected=0
- <7>[ 48.910154] c0 usb: android_work sent uevent USB_STATE=CONNECTED
- <7>[ 48.928634] c0 usb: GET_DES
- <7>[ 48.943803] c0 usb: GET_DES
- <6>[ 48.948629] c0 android_usb gadget: high speed config #1: android
- <7>[ 48.948734] c0 usb: SET_CON
- <7>[ 48.948841] c0 usb: android_work config=c1356964,connected=1,sw_connected=1
- <7>[ 48.960083] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
- <6>[ 53.954086] c0 max17042 9-0036: max17042_get_soc : soc(0e0c)
- <6>[ 53.954200] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 53.954297] c0 max17042 9-0036: max17042_get_soc : use raw (14), soc (13)
- <6>[ 53.955700] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 60.351061] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380
- <6>[ 62.055155] c0 pm-hotplug: disable cpu auto-hotplug
- <6>[ 64.004051] c0 max17042 9-0036: max17042_get_soc : soc(0ea5)
- <6>[ 64.004160] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 64.004255] c0 max17042 9-0036: max17042_get_soc : use raw (14), soc (14)
- <6>[ 64.005615] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 74.054073] c0 max17042 9-0036: max17042_get_soc : soc(0ea5)
- <6>[ 74.054185] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 74.054281] c0 max17042 9-0036: max17042_get_soc : use raw (14), soc (14)
- <6>[ 74.055659] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 84.104035] c0 max17042 9-0036: max17042_get_soc : soc(0ea5)
- <6>[ 84.104143] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 84.104238] c0 max17042 9-0036: max17042_get_soc : use raw (14), soc (14)
- <6>[ 84.105599] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 86.750999] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 86.751865] c0 sec-battery sec-battery: sec_bat_check_temper: temp=310, adc=830
- <6>[ 86.752028] c0 sec-battery sec-battery: Time past : 45 secs
- <6>[ 86.752150] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 86.752304] c0 sec-battery sec-battery: soc(14), vfocv(3738), vcell(4105), temp(31), charging(1), health(1), chg_adc(0)
- <4>[ 86.759091] c0 healthd: battery l=14 v=4105 t=31.0 h=2 st=2 c=0 chg=u
- <6>[ 94.154064] c0 max17042 9-0036: max17042_get_soc : soc(0f26)
- <6>[ 94.154174] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 94.154268] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (14)
- <6>[ 94.155647] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <3>[ 101.900083] c0 [HOTPLUG IN] check_up 1400000>=500000 && 200>100
- <3>[ 101.904642] c0 CPU_UP 3
- <4>[ 101.919688] c1 CPU1: Booted secondary processor
- <4>[ 101.919746] c1 CPU1: Booted secondary processor
- <6>[ 101.919892] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 101.920058] c1 Switched to NOHz mode on CPU #1
- <6>[ 104.162518] c0 max17042 9-0036: max17042_get_soc : soc(0f26)
- <6>[ 104.162587] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 104.162640] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (14)
- <6>[ 104.163500] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 108.413283] c0 lcd panel: id=2 brightness=5, bl=0, candela=30
- <6>[ 110.417024] c1 s3cfb s3cfb.0: change blank mode=4, fb2
- <6>[ 110.417106] c1 lcd panel: ld9040_power_off
- <6>[ 114.217511] c0 max17042 9-0036: max17042_get_soc : soc(0f26)
- <6>[ 114.217580] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 114.217633] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (14)
- <6>[ 114.218495] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 120.480367] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=390
- <6>[ 124.242530] c0 max17042 9-0036: max17042_get_soc : soc(0f26)
- <6>[ 124.242599] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 124.242651] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (14)
- <6>[ 124.243528] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 126.885413] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 126.886039] c1 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=806
- <6>[ 126.886131] c1 sec-battery sec-battery: Time past : 85 secs
- <6>[ 126.886205] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 126.886303] c1 sec-battery sec-battery: soc(14), vfocv(3739), vcell(3864), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 126.888208] c0 healthd: battery l=14 v=3864 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 134.277534] c0 max17042 9-0036: max17042_get_soc : soc(0f26)
- <6>[ 134.277602] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 134.277655] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (14)
- <6>[ 134.278555] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 144.282590] c0 max17042 9-0036: max17042_get_soc : soc(0f26)
- <6>[ 144.282660] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 144.282713] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (14)
- <6>[ 144.283579] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 150.560309] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=420
- <6>[ 154.302537] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 154.302606] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 154.302659] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 154.303538] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 164.327592] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 164.327662] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 164.327715] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 164.328592] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 164.871547] c1 s3cfb s3cfb.0: change blank mode=0, fb2
- <6>[ 164.871631] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 164.871756] c1 lcd panel: ld9040_power_on
- <6>[ 165.074433] c0 lcd panel: id=2 brightness=0, bl=0, candela=30
- <6>[ 165.077220] c0 lcd panel: id=2 brightness=255, bl=20, candela=300
- <6>[ 167.045354] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 167.046143] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=797
- <6>[ 167.046248] c0 sec-battery sec-battery: Time past : 126 secs
- <6>[ 167.046393] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 167.046494] c0 sec-battery sec-battery: soc(15), vfocv(3740), vcell(3813), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 167.048754] c0 healthd: battery l=15 v=3813 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 174.362524] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 174.362595] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 174.362648] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 174.363565] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 180.645263] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=440
- <6>[ 184.382529] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 184.382599] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 184.382652] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 184.383520] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 194.412531] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 194.412600] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 194.412652] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 194.413538] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 204.442530] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 204.442601] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 204.442655] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 204.443531] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 207.200454] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 207.201075] c1 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=788
- <6>[ 207.201170] c1 sec-battery sec-battery: Time past : 166 secs
- <6>[ 207.201248] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 207.201346] c1 sec-battery sec-battery: soc(15), vfocv(3740), vcell(3786), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 207.203222] c1 healthd: battery l=15 v=3786 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 214.462537] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 214.462607] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 214.462661] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 214.463572] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 224.487528] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 224.487599] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 224.487653] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 224.488527] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 224.733428] c1 lcd panel: id=2 brightness=5, bl=0, candela=30
- <6>[ 226.762707] c1 s3cfb s3cfb.0: change blank mode=4, fb2
- <6>[ 226.762787] c1 lcd panel: ld9040_power_off
- <6>[ 234.522527] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 234.522597] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 234.522650] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 234.523523] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 244.547541] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 244.547610] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 244.547662] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 244.548536] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 247.280395] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 247.281008] c0 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=778
- <6>[ 247.281097] c0 sec-battery sec-battery: Time past : 206 secs
- <6>[ 247.281168] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 247.281259] c0 sec-battery sec-battery: soc(15), vfocv(3740), vcell(3813), temp(35), charging(1), health(1), chg_adc(0)
- <4>[ 247.283431] c1 healthd: battery l=15 v=3813 t=35.0 h=2 st=2 c=0 chg=u
- <6>[ 254.572533] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 254.572602] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 254.572655] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 254.573522] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 264.602524] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 264.602595] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 264.602647] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 264.603544] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 274.622525] c0 max17042 9-0036: max17042_get_soc : soc(0fa8)
- <6>[ 274.622594] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 274.622648] c0 max17042 9-0036: max17042_get_soc : use raw (15), soc (15)
- <6>[ 274.623514] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 284.647528] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 284.647597] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 284.647650] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 284.648551] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 287.365432] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 287.366049] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=785
- <6>[ 287.366139] c0 sec-battery sec-battery: Time past : 246 secs
- <6>[ 287.366210] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 287.366300] c0 sec-battery sec-battery: soc(16), vfocv(3741), vcell(3805), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 287.368478] c1 healthd: battery l=16 v=3805 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 294.682532] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 294.682602] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 294.682654] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 294.683522] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 300.000078] c0 [MSC] sii9234_enqueue_msc_work() add item, addr = 0xe2a5fa20, cnt=1
- <6>[ 300.000167] c0 [MSC] sii9234_enqueue_msc_work() command(0xe0), offset(0x31), data_1(0x0), data_2(0x0)
- <6>[ 300.000265] c0 [MSC] sii9234_enqueue_msc_work() msc work schedule
- <6>[ 300.000361] c1 sii9234_process_msc_work() - start
- <6>[ 300.000416] c1 [MSC] sii9234_process_msc_work() command(0xe0), offset(0x31), data_1(0x0), data_2(0x0)
- <6>[ 300.000514] c1 sii9234_process_msc_work(): msc_req_locked error -2
- <6>[ 304.702548] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 304.702617] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 304.702671] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 304.703563] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 314.727526] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 314.727594] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 314.727647] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 314.728522] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 324.762524] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 324.762593] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 324.762646] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 324.763521] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 327.525439] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 327.526053] c1 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=790
- <6>[ 327.526147] c1 sec-battery sec-battery: Time past : 286 secs
- <6>[ 327.526223] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 327.526319] c1 sec-battery sec-battery: soc(16), vfocv(3741), vcell(3814), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 327.528133] c0 healthd: battery l=16 v=3814 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 331.845246] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=460
- <6>[ 334.787521] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 334.787592] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 334.787645] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 334.788550] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 344.807588] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 344.807658] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 344.807711] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 344.808616] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 354.842532] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 354.842600] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 354.842652] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 354.843521] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 364.862536] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 364.862605] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 364.862657] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 364.863554] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 367.685427] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 367.686050] c1 sec-battery sec-battery: sec_bat_check_temper: temp=340, adc=784
- <6>[ 367.686143] c1 sec-battery sec-battery: Time past : 326 secs
- <6>[ 367.686219] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 367.686315] c1 sec-battery sec-battery: soc(16), vfocv(3741), vcell(3790), temp(34), charging(1), health(1), chg_adc(0)
- <4>[ 367.688469] c1 healthd: battery l=16 v=3790 t=34.0 h=2 st=2 c=0 chg=u
- <6>[ 377.024292] c0 max17042 9-0036: max17042_get_soc : soc(1029)
- <6>[ 377.024404] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 377.024500] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 377.026239] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 389.023916] c0 max17042 9-0036: max17042_get_soc : soc(10ab)
- <6>[ 389.024022] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 389.024118] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 389.025482] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 395.020943] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=410
- <6>[ 401.024054] c0 max17042 9-0036: max17042_get_soc : soc(10ab)
- <6>[ 401.024161] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 401.024256] c0 max17042 9-0036: max17042_get_soc : use raw (16), soc (16)
- <6>[ 401.025802] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 409.710937] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 409.711800] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=803
- <6>[ 409.711962] c0 sec-battery sec-battery: Time past : 368 secs
- <6>[ 409.712086] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 409.712239] c0 sec-battery sec-battery: soc(16), vfocv(3743), vcell(4136), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 409.718679] c1 healthd: battery l=16 v=4136 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 413.023964] c0 max17042 9-0036: max17042_get_soc : soc(112c)
- <6>[ 413.024071] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 413.024166] c0 max17042 9-0036: max17042_get_soc : use raw (17), soc (17)
- <6>[ 413.025706] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 425.024022] c0 max17042 9-0036: max17042_get_soc : soc(112c)
- <6>[ 425.024128] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 425.024222] c0 max17042 9-0036: max17042_get_soc : use raw (17), soc (17)
- <6>[ 425.025755] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 431.020979] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=390
- <3>[ 432.650252] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 432.654812] c0 CPU_DOWN 1
- <4>[ 432.663963] c1 IRQ112 no longer affine to CPU1
- <5>[ 432.664755] c0 CPU1: shutdown
- <6>[ 435.059116] c0 max17042 9-0036: max17042_get_soc : soc(112c)
- <6>[ 435.059223] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 435.059317] c0 max17042 9-0036: max17042_get_soc : use raw (17), soc (17)
- <6>[ 435.060696] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 445.109045] c0 max17042 9-0036: max17042_get_soc : soc(11ae)
- <6>[ 445.109152] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 445.109246] c0 max17042 9-0036: max17042_get_soc : use raw (17), soc (17)
- <6>[ 445.110612] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 449.806005] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 449.806870] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=808
- <6>[ 449.807030] c0 sec-battery sec-battery: Time past : 408 secs
- <6>[ 449.807150] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 449.807304] c0 sec-battery sec-battery: soc(17), vfocv(3745), vcell(4176), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 449.813490] c0 healthd: battery l=17 v=4176 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 455.159049] c0 max17042 9-0036: max17042_get_soc : soc(11ae)
- <6>[ 455.159158] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 455.159253] c0 max17042 9-0036: max17042_get_soc : use raw (17), soc (17)
- <6>[ 455.160621] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 461.156040] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380
- <6>[ 465.209039] c0 max17042 9-0036: max17042_get_soc : soc(122f)
- <6>[ 465.209147] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 465.209241] c0 max17042 9-0036: max17042_get_soc : use raw (18), soc (18)
- <6>[ 465.210602] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 471.435249] c0 repeated home_key action 1.
- <6>[ 471.435637] c0 s3cfb s3cfb.0: change blank mode=0, fb2
- <6>[ 471.435773] c0 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 471.435962] c0 lcd panel: ld9040_power_on
- <6>[ 471.540241] c0 repeated home_key action 2.
- <6>[ 471.626733] c0 lcd panel: id=2 brightness=0, bl=0, candela=30
- <6>[ 471.631322] c0 lcd panel: id=2 brightness=255, bl=20, candela=300
- <6>[ 475.242385] c0 max17042 9-0036: max17042_get_soc : soc(122f)
- <6>[ 475.242423] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 475.242452] c0 max17042 9-0036: max17042_get_soc : use raw (18), soc (18)
- <6>[ 475.243253] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 475.314563] c0 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 475.755053] c0 [HOTPLUG IN] check_up 1200000>=500000 && 200>100
- <3>[ 475.759594] c0 CPU_UP 3
- <4>[ 475.796228] c1 CPU1: Booted secondary processor
- <4>[ 475.796283] c1 CPU1: Booted secondary processor
- <6>[ 475.796447] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 475.800060] c1 Switched to NOHz mode on CPU #1
- <6>[ 477.155632] c1 [VIB] vibrator_work: pwm_config duty=28230
- <7>[ 478.933599] c1 SELinux: initialized (dev mmcblk0p11, type vfat), uses genfs_contexts
- <6>[ 479.017868] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 479.017919] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 479.201823] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 479.201892] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <7>[ 479.226277] c0 usb: enable_store enabled=0, !dev->enabled=0
- <7>[ 479.226315] c0 usb: usb_gadget_disconnect
- <7>[ 479.226402] c0 usb: usb_remove_config cdev->config= (null), config=c1356964
- <6>[ 479.226474] c1 adb_release
- <6>[ 479.231569] c0 adb_open
- <7>[ 479.231660] c0 usb: android_work config= (null),connected=0,sw_connected=1
- <7>[ 479.232540] c0 usb: functions_store buff=none
- <7>[ 479.232583] c0 usb: android_enable_function name=none
- <3>[ 479.232629] c0 android_usb: Cannot enable 'none'
- <7>[ 479.235673] c0 usb: android_work sent uevent USB_STATE=DISCONNECTED
- <7>[ 479.236009] c0 usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 479.236057] c0 usb: enable_store vendor=18d1,product=4ee2,bcdDevice=226
- <7>[ 479.236104] c0 ,Class=0,SubClass=0,Protocol=0
- <7>[ 479.236139] c0 usb: enable_store next cmd : usb_add_config
- <7>[ 479.236182] c0 usb: usb_gadget_connect
- <7>[ 479.236419] c0 usb: enable_store enabled=0, !dev->enabled=0
- <7>[ 479.236460] c0 usb: usb_gadget_disconnect
- <7>[ 479.236497] c0 usb: usb_remove_config cdev->config= (null), config=c1356964
- <6>[ 479.240398] c1 adb_release
- <7>[ 479.242185] c0 usb: enable_store enabled=0, !dev->enabled=1
- <7>[ 479.242249] c0 usb: usb_gadget_disconnect
- <7>[ 479.242371] c0 usb: functions_store buff=mtp,adb
- <7>[ 479.242416] c0 usb: android_enable_function name=mtp
- <7>[ 479.242459] c0 usb: android_enable_function name=adb
- <7>[ 479.242565] c0 usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 479.242612] c0 usb: enable_store vendor=18d1,product=4ee2,bcdDevice=226
- <7>[ 479.242673] c0 ,Class=0,SubClass=0,Protocol=0
- <7>[ 479.242712] c0 usb: enable_store next cmd : usb_add_config
- <6>[ 479.248125] c0 adb_open
- <7>[ 479.248164] c0 usb: android_bind_enabled_functions f:mtp
- <6>[ 479.248208] c0 mtp_bind_config
- <7>[ 479.248278] c0 usb: android_bind_enabled_functions f:adb
- <6>[ 479.248324] c0 adb_bind_config
- <7>[ 479.248367] c0 usb: usb_gadget_connect
- <7>[ 479.381188] c0 usb: GET_DES
- <7>[ 479.381260] c0 usb: android_work config= (null),connected=1,sw_connected=0
- <7>[ 479.381936] c0 usb: android_work sent uevent USB_STATE=CONNECTED
- <7>[ 479.409681] c0 usb: GET_DES
- <7>[ 479.511315] c0 usb: GET_DES
- <6>[ 479.517573] c0 android_usb gadget: high speed config #1: android
- <7>[ 479.517667] c0 usb: SET_CON
- <7>[ 479.517752] c0 usb: android_work config=c1356964,connected=1,sw_connected=1
- <7>[ 479.518289] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
- <6>[ 480.044205] c1 mtp_open
- <6>[ 485.283903] c0 max17042 9-0036: max17042_get_soc : soc(122f)
- <6>[ 485.284019] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 485.284116] c0 max17042 9-0036: max17042_get_soc : use raw (18), soc (18)
- <6>[ 485.285693] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <3>[ 488.310303] c0 [HOTPLUG OUT] check_down 200000<=200000 && 100<100
- <3>[ 488.315112] c0 CPU_DOWN 1
- <4>[ 488.324214] c1 IRQ112 no longer affine to CPU1
- <5>[ 488.325016] c0 CPU1: shutdown
- <6>[ 489.961100] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 489.961997] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=811
- <6>[ 489.962164] c0 sec-battery sec-battery: Time past : 448 secs
- <6>[ 489.962290] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 489.962443] c0 sec-battery sec-battery: soc(18), vfocv(3746), vcell(4172), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 489.969313] c0 healthd: battery l=18 v=4172 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 490.938459] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 495.363794] c0 max17042 9-0036: max17042_get_soc : soc(12b1)
- <6>[ 495.363910] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 495.364007] c0 max17042 9-0036: max17042_get_soc : use raw (18), soc (18)
- <6>[ 495.365450] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 497.999216] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 505.418784] c0 max17042 9-0036: max17042_get_soc : soc(12b1)
- <6>[ 505.418897] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 505.418994] c0 max17042 9-0036: max17042_get_soc : use raw (18), soc (18)
- <6>[ 505.420333] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 506.775430] c0 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 509.570068] c0 [HOTPLUG IN] check_up 1200000>=500000 && 200>100
- <3>[ 509.574586] c0 CPU_UP 3
- <4>[ 509.611174] c1 CPU1: Booted secondary processor
- <4>[ 509.611204] c1 CPU1: Booted secondary processor
- <6>[ 509.611294] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 509.615039] c1 Switched to NOHz mode on CPU #1
- <6>[ 511.208410] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 515.758880] c0 max17042 9-0036: max17042_get_soc : soc(1332)
- <6>[ 515.758995] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 515.759094] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 515.760646] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 517.020717] c1 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 519.675246] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 519.679808] c0 CPU_DOWN 1
- <4>[ 519.689017] c1 IRQ112 no longer affine to CPU1
- <5>[ 519.689837] c0 CPU1: shutdown
- <6>[ 525.829089] c0 max17042 9-0036: max17042_get_soc : soc(1332)
- <6>[ 525.829203] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 525.829299] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 525.831353] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 526.040756] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 530.081104] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 530.081990] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=812
- <6>[ 530.082154] c0 sec-battery sec-battery: Time past : 489 secs
- <6>[ 530.082277] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 530.082430] c0 sec-battery sec-battery: soc(19), vfocv(3748), vcell(4175), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 530.089324] c0 healthd: battery l=19 v=4175 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 532.507183] c0 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 532.930077] c0 [HOTPLUG IN] check_up 1400000>=500000 && 200>100
- <3>[ 532.934662] c0 CPU_UP 3
- <4>[ 532.965949] c1 CPU1: Booted secondary processor
- <4>[ 532.966004] c1 CPU1: Booted secondary processor
- <6>[ 532.966169] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 532.970057] c1 Switched to NOHz mode on CPU #1
- <6>[ 535.933960] c0 max17042 9-0036: max17042_get_soc : soc(1332)
- <6>[ 535.934072] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 535.934171] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 535.935741] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 541.171341] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 545.983832] c0 max17042 9-0036: max17042_get_soc : soc(13ec)
- <6>[ 545.983951] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 545.984050] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 545.985603] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <3>[ 547.985241] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 547.989802] c0 CPU_DOWN 1
- <4>[ 547.999034] c1 IRQ112 no longer affine to CPU1
- <5>[ 547.999841] c0 CPU1: shutdown
- <6>[ 550.725663] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 556.043810] c0 max17042 9-0036: max17042_get_soc : soc(13ec)
- <6>[ 556.043929] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 556.044027] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 556.045475] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <3>[ 561.695102] c0 [HOTPLUG IN] check_up 500000>=500000 && 200>100
- <3>[ 561.699600] c0 CPU_UP 3
- <4>[ 561.736227] c1 CPU1: Booted secondary processor
- <4>[ 561.736284] c1 CPU1: Booted secondary processor
- <6>[ 561.736442] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 561.740061] c1 Switched to NOHz mode on CPU #1
- <6>[ 565.054559] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 565.767431] c0 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
- <7>[ 565.767722] c0 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
- <6>[ 566.087843] c0 max17042 9-0036: max17042_get_soc : soc(13ec)
- <6>[ 566.087918] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 566.087971] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 566.095416] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 570.160484] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 570.161104] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=799
- <6>[ 570.161194] c0 sec-battery sec-battery: Time past : 529 secs
- <6>[ 570.161266] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 570.161359] c0 sec-battery sec-battery: soc(19), vfocv(3750), vcell(3849), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 570.163680] c0 healthd: battery l=19 v=3849 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 575.150152] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 575.150227] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 575.179737] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 575.179813] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 576.152693] c0 max17042 9-0036: max17042_get_soc : soc(13ec)
- <6>[ 576.152765] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 576.152818] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 576.153742] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 579.910543] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 581.486413] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=410
- <6>[ 585.999194] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 586.202464] c0 max17042 9-0036: max17042_get_soc : soc(13ec)
- <6>[ 586.202502] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 586.202531] c0 max17042 9-0036: max17042_get_soc : use raw (19), soc (19)
- <6>[ 586.203347] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 592.280727] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 596.648702] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 596.703237] c0 max17042 9-0036: max17042_get_soc : soc(14a5)
- <6>[ 596.703327] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 596.703397] c0 max17042 9-0036: max17042_get_soc : use raw (20), soc (20)
- <6>[ 596.704521] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <3>[ 598.600314] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 598.604879] c0 CPU_DOWN 1
- <4>[ 598.614133] c1 IRQ112 no longer affine to CPU1
- <5>[ 598.614956] c0 CPU1: shutdown
- <6>[ 606.754150] c0 max17042 9-0036: max17042_get_soc : soc(14a5)
- <6>[ 606.754263] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 606.754359] c0 max17042 9-0036: max17042_get_soc : use raw (20), soc (20)
- <6>[ 606.755869] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 610.251096] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 610.251987] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=792
- <6>[ 610.252151] c0 sec-battery sec-battery: Time past : 569 secs
- <6>[ 610.252277] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 610.252435] c0 sec-battery sec-battery: soc(20), vfocv(3751), vcell(4177), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 610.259354] c0 healthd: battery l=20 v=4177 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 611.551050] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=390
- <6>[ 612.255517] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 616.804100] c0 max17042 9-0036: max17042_get_soc : soc(14a5)
- <6>[ 616.804217] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 616.804315] c0 max17042 9-0036: max17042_get_soc : use raw (20), soc (20)
- <6>[ 616.805675] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 617.615834] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 620.923181] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 623.050724] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 626.853856] c0 max17042 9-0036: max17042_get_soc : soc(14a5)
- <6>[ 626.853974] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 626.854071] c0 max17042 9-0036: max17042_get_soc : use raw (20), soc (20)
- <6>[ 626.855457] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 629.435683] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 630.971883] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 632.088093] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 633.950111] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 636.903817] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 636.903933] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 636.904031] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 636.905410] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 643.940822] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 644.976054] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 646.953838] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 646.953954] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 646.954050] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 646.955427] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 649.325665] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 650.401092] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 650.401977] c0 sec-battery sec-battery: sec_bat_check_temper: temp=330, adc=797
- <6>[ 650.402160] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
- <6>[ 650.403524] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
- <6>[ 650.705163] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 650.705314] c0 sec-battery sec-battery: sec_bat_charging_time_management: Reset charging current
- <6>[ 650.705465] c0 sec-battery sec-battery: Time past : 609 secs
- <6>[ 650.705584] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 650.705738] c0 sec-battery sec-battery: soc(21), vfocv(3752), vcell(4174), temp(33), charging(1), health(1), chg_adc(0)
- <4>[ 650.712659] c0 healthd: battery l=21 v=4174 t=33.0 h=2 st=2 c=0 chg=u
- <6>[ 654.505193] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 656.962315] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 656.962343] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 656.962365] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 656.963100] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <3>[ 657.350069] c0 [HOTPLUG IN] check_up 1200000>=500000 && 200>100
- <3>[ 657.354613] c0 CPU_UP 3
- <4>[ 657.388949] c1 CPU1: Booted secondary processor
- <4>[ 657.389006] c1 CPU1: Booted secondary processor
- <6>[ 657.389168] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 657.390054] c1 Switched to NOHz mode on CPU #1
- <6>[ 659.066333] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 666.308357] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 667.008796] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 667.008914] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 667.009013] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 667.010381] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 667.998738] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 668.610682] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 669.435580] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 671.443069] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 672.985726] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 678.023880] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 678.023998] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 678.024096] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 678.025792] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 688.057608] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 688.057682] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 688.057735] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 688.058629] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 691.120954] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 691.121833] c0 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=780
- <6>[ 691.122004] c0 sec-battery sec-battery: Time past : 650 secs
- <6>[ 691.122133] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 691.122290] c0 sec-battery sec-battery: soc(22), vfocv(3753), vcell(3945), temp(35), charging(1), health(1), chg_adc(0)
- <4>[ 691.129455] c1 healthd: battery l=22 v=3945 t=35.0 h=2 st=2 c=0 chg=u
- <6>[ 691.849263] c1 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 695.955318] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 695.959879] c0 CPU_DOWN 1
- <4>[ 695.969138] c1 IRQ112 no longer affine to CPU1
- <5>[ 695.969947] c0 CPU1: shutdown
- <6>[ 698.108800] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 698.108914] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 698.109013] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 698.110396] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 699.606021] c0 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 703.255077] c0 [HOTPLUG IN] check_up 1200000>=500000 && 200>100
- <3>[ 703.259618] c0 CPU_UP 3
- <4>[ 703.286336] c1 CPU1: Booted secondary processor
- <4>[ 703.286391] c1 CPU1: Booted secondary processor
- <6>[ 703.286555] c1 notifier_call_chain : NOTIFY BAD tick_notify
- <6>[ 703.290054] c1 Switched to NOHz mode on CPU #1
- <6>[ 706.818336] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 708.163860] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 708.163975] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 708.164073] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 708.165431] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 718.563818] c0 max17042 9-0036: max17042_get_soc : soc(16d2)
- <6>[ 718.563913] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 718.563988] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 718.565422] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 720.566630] c1 [VIB] vibrator_work: pwm_config duty=28230
- <5>[ 721.069158] c0 type=1400 audit(1447058475.160:21): avc: denied { read } for pid=2031 comm="recovery" name="validus-i9100-MM-v9.alpha-2015-11-09.zip" dev=mmcblk0p11 ino=172 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
- <5>[ 721.069340] c0 type=1400 audit(1447058475.160:22): avc: denied { execute } for pid=2031 comm="recovery" path="/emmc/!roms/validus-i9100-MM-v9.alpha-2015-11-09.zip" dev=mmcblk0p11 ino=172 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
- <5>[ 722.094069] c1 type=1400 audit(1447058476.185:23): avc: denied { execute } for pid=2031 comm="recovery" path="/dev/__legacy_properties__" dev=tmpfs ino=1725 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=file
- <5>[ 722.144288] c0 type=1400 audit(1447058476.235:24): avc: denied { execute } for pid=2032 comm="recovery" name="updater" dev=tmpfs ino=1724 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
- <5>[ 722.144577] c1 type=1400 audit(1447058476.235:25): avc: denied { execute_no_trans } for pid=2032 comm="recovery" path="/tmp/updater" dev=tmpfs ino=1724 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
- <6>[ 722.187608] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 722.187690] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 724.508189] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 724.508248] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <5>[ 724.509411] c1 type=1400 audit(1447058478.600:26): avc: denied { write } for pid=2032 comm="updater" name="/" dev=mmcblk0p9 ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <5>[ 724.509496] c1 type=1400 audit(1447058478.600:27): avc: denied { add_name } for pid=2032 comm="updater" name="Synapse" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <5>[ 724.509573] c1 type=1400 audit(1447058478.600:28): avc: denied { create } for pid=2032 comm="updater" name="Synapse" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <5>[ 724.510429] c1 type=1400 audit(1447058478.605:29): avc: denied { setattr } for pid=2032 comm="updater" name="Synapse" dev=mmcblk0p9 ino=49153 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <5>[ 724.510634] c1 type=1400 audit(1447058478.605:30): avc: denied { create } for pid=2032 comm="updater" name="msaa" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
- <6>[ 728.612364] c0 max17042 9-0036: max17042_get_soc : soc(16d2)
- <6>[ 728.612393] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 728.612415] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 728.613208] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 731.200395] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 731.200956] c0 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=774
- <6>[ 731.201005] c0 sec-battery sec-battery: Time past : 690 secs
- <6>[ 731.201044] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 731.201094] c0 sec-battery sec-battery: soc(22), vfocv(3755), vcell(3711), temp(35), charging(1), health(1), chg_adc(0)
- <4>[ 731.202450] c1 healthd: battery l=22 v=3711 t=35.0 h=2 st=2 c=0 chg=u
- <6>[ 731.840227] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=420
- <6>[ 738.642489] c0 max17042 9-0036: max17042_get_soc : soc(16d2)
- <6>[ 738.642528] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 738.642557] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 738.643791] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 748.662456] c0 max17042 9-0036: max17042_get_soc : soc(16d2)
- <6>[ 748.662495] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 748.662524] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 748.663339] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 754.887305] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 755.886263] c1 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 755.887526] c1 throttling: set cpufreq upper limit.
- <6>[ 757.895079] c0 change state: 1st throttle->normal.
- <6>[ 758.682487] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 758.682522] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 758.682551] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 758.683369] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 758.895089] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 758.898378] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 761.950211] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=490
- <6>[ 764.954604] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 765.961230] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 765.973371] c0 throttling: set cpufreq upper limit.
- <6>[ 767.970079] c0 change state: 1st throttle->normal.
- <6>[ 768.702696] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 768.702732] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 768.702761] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 768.703601] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 768.970087] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 768.980139] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 771.280209] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 771.280715] c0 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=726
- <6>[ 771.280752] c0 sec-battery sec-battery: Time past : 730 secs
- <6>[ 771.280782] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 771.280819] c0 sec-battery sec-battery: soc(22), vfocv(3754), vcell(3833), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 771.281893] c1 healthd: battery l=22 v=3833 t=38.0 h=2 st=2 c=0 chg=u
- <6>[ 773.405646] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 774.406231] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 774.416243] c0 throttling: set cpufreq upper limit.
- <6>[ 776.415062] c0 change state: 1st throttle->normal.
- <6>[ 777.415084] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 777.425218] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 778.722362] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 778.722392] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 778.722415] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 778.723207] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 779.596203] c1 lcd panel: id=2 brightness=5, bl=0, candela=30
- <6>[ 780.705845] c1 lcd panel: id=2 brightness=255, bl=20, candela=300
- <6>[ 781.713559] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 782.710793] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 782.716513] c0 throttling: set cpufreq upper limit.
- <6>[ 784.715049] c0 change state: 1st throttle->normal.
- <6>[ 785.715083] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 785.716566] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 788.742431] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 788.742471] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 788.742500] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 788.743305] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 789.174583] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 790.170805] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 790.180156] c0 throttling: set cpufreq upper limit.
- <6>[ 792.000275] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=520
- <6>[ 792.180059] c0 change state: 1st throttle->normal.
- <6>[ 793.180094] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 793.184085] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 795.842377] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 796.851278] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 796.852102] c0 throttling: set cpufreq upper limit.
- <6>[ 798.762533] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 798.762570] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 798.762598] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 798.763413] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 798.850074] c0 change state: 1st throttle->normal.
- <6>[ 799.850067] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 799.855198] c0 normal: free cpufreq_limit & interrupt enable.
- <4>[ 800.777577] c0 audit_printk_skb: 6 callbacks suppressed
- <5>[ 800.777611] c0 type=1400 audit(1447058554.870:33): avc: denied { create } for pid=2032 comm="updater" name="app_process32" scontext=u:r:init:s0 tcontext=u:object_r:zygote_exec:s0 tclass=file
- <5>[ 800.777799] c0 type=1400 audit(1447058554.870:34): avc: denied { write } for pid=2032 comm="updater" name="app_process32" dev=mmcblk0p9 ino=16388 scontext=u:r:init:s0 tcontext=u:object_r:zygote_exec:s0 tclass=file
- <5>[ 800.792167] c0 type=1400 audit(1447058554.885:35): avc: denied { setattr } for pid=2032 comm="updater" name="app_process32" dev=mmcblk0p9 ino=16388 scontext=u:r:init:s0 tcontext=u:object_r:zygote_exec:s0 tclass=file
- <5>[ 801.198407] c0 type=1400 audit(1447058555.290:36): avc: denied { create } for pid=2032 comm="updater" name="bootanimation" scontext=u:r:init:s0 tcontext=u:object_r:bootanim_exec:s0 tclass=file
- <5>[ 801.198609] c0 type=1400 audit(1447058555.290:37): avc: denied { write } for pid=2032 comm="updater" name="bootanimation" dev=mmcblk0p9 ino=16400 scontext=u:r:init:s0 tcontext=u:object_r:bootanim_exec:s0 tclass=file
- <5>[ 801.250837] c0 type=1400 audit(1447058555.345:38): avc: denied { setattr } for pid=2032 comm="updater" name="bootanimation" dev=mmcblk0p9 ino=16400 scontext=u:r:init:s0 tcontext=u:object_r:bootanim_exec:s0 tclass=file
- <5>[ 801.331615] c0 type=1400 audit(1447058555.425:39): avc: denied { create } for pid=2032 comm="updater" name="clatd" scontext=u:r:init:s0 tcontext=u:object_r:clatd_exec:s0 tclass=file
- <5>[ 801.331765] c0 type=1400 audit(1447058555.425:40): avc: denied { write } for pid=2032 comm="updater" name="clatd" dev=mmcblk0p9 ino=16405 scontext=u:r:init:s0 tcontext=u:object_r:clatd_exec:s0 tclass=file
- <5>[ 801.373574] c0 type=1400 audit(1447058555.465:41): avc: denied { setattr } for pid=2032 comm="updater" name="clatd" dev=mmcblk0p9 ino=16405 scontext=u:r:init:s0 tcontext=u:object_r:clatd_exec:s0 tclass=file
- <5>[ 801.410976] c0 type=1400 audit(1447058555.505:42): avc: denied { create } for pid=2032 comm="updater" name="debuggerd" scontext=u:r:init:s0 tcontext=u:object_r:debuggerd_exec:s0 tclass=file
- <6>[ 802.528066] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 803.526263] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 803.535430] c0 throttling: set cpufreq upper limit.
- <6>[ 805.535093] c0 change state: 1st throttle->normal.
- <4>[ 806.276890] c0 audit_printk_skb: 222 callbacks suppressed
- <5>[ 806.276923] c0 type=1400 audit(1447058560.370:117): avc: denied { create } for pid=2032 comm="updater" name="uncrypt" scontext=u:r:init:s0 tcontext=u:object_r:uncrypt_exec:s0 tclass=file
- <5>[ 806.277140] c0 type=1400 audit(1447058560.370:118): avc: denied { write } for pid=2032 comm="updater" name="uncrypt" dev=mmcblk0p9 ino=16510 scontext=u:r:init:s0 tcontext=u:object_r:uncrypt_exec:s0 tclass=file
- <5>[ 806.429826] c1 type=1400 audit(1447058560.520:119): avc: denied { setattr } for pid=2032 comm="updater" name="uncrypt" dev=mmcblk0p9 ino=16510 scontext=u:r:init:s0 tcontext=u:object_r:uncrypt_exec:s0 tclass=file
- <5>[ 806.430448] c1 type=1400 audit(1447058560.525:120): avc: denied { create } for pid=2032 comm="updater" name="vdc" scontext=u:r:init:s0 tcontext=u:object_r:vdc_exec:s0 tclass=file
- <5>[ 806.430731] c1 type=1400 audit(1447058560.525:121): avc: denied { write } for pid=2032 comm="updater" name="vdc" dev=mmcblk0p9 ino=16511 scontext=u:r:init:s0 tcontext=u:object_r:vdc_exec:s0 tclass=file
- <5>[ 806.447228] c1 type=1400 audit(1447058560.540:122): avc: denied { setattr } for pid=2032 comm="updater" name="vdc" dev=mmcblk0p9 ino=16511 scontext=u:r:init:s0 tcontext=u:object_r:vdc_exec:s0 tclass=file
- <5>[ 806.447719] c1 type=1400 audit(1447058560.540:123): avc: denied { create } for pid=2032 comm="updater" name="vold" scontext=u:r:init:s0 tcontext=u:object_r:vold_exec:s0 tclass=file
- <5>[ 806.447960] c1 type=1400 audit(1447058560.540:124): avc: denied { write } for pid=2032 comm="updater" name="vold" dev=mmcblk0p9 ino=16512 scontext=u:r:init:s0 tcontext=u:object_r:vold_exec:s0 tclass=file
- <6>[ 806.535074] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 806.541113] c0 normal: free cpufreq_limit & interrupt enable.
- <5>[ 806.613313] c0 type=1400 audit(1447058560.705:125): avc: denied { setattr } for pid=2032 comm="updater" name="vold" dev=mmcblk0p9 ino=16512 scontext=u:r:init:s0 tcontext=u:object_r:vold_exec:s0 tclass=file
- <5>[ 806.815404] c0 type=1400 audit(1447058560.910:126): avc: denied { create } for pid=2032 comm="updater" name="wpa_supplicant" scontext=u:r:init:s0 tcontext=u:object_r:wpa_exec:s0 tclass=file
- <6>[ 808.782385] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 808.782413] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 808.782435] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 808.783206] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 809.094475] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 810.091245] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 810.100317] c0 throttling: set cpufreq upper limit.
- <6>[ 811.360275] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 811.360820] c0 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=702
- <6>[ 811.360875] c0 sec-battery sec-battery: Time past : 770 secs
- <6>[ 811.360915] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 811.360965] c0 sec-battery sec-battery: soc(22), vfocv(3753), vcell(3430), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 811.362624] c1 healthd: battery l=22 v=3430 t=38.0 h=2 st=2 c=0 chg=u
- <6>[ 813.100200] c0 change state: 1st throttle->normal.
- <6>[ 814.100101] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 814.103492] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 816.943153] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 817.941229] c1 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 817.942394] c1 throttling: set cpufreq upper limit.
- <6>[ 818.803433] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 818.803495] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 818.803545] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 818.804700] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 820.945173] c0 change state: 1st throttle->normal.
- <6>[ 821.945091] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 821.950184] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 824.630804] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 825.632347] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 825.638431] c0 throttling: set cpufreq upper limit.
- <6>[ 828.635093] c0 change state: 1st throttle->normal.
- <6>[ 828.822602] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 828.822651] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 828.822686] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 828.823556] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 829.640083] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 829.650139] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 832.306532] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 833.311797] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 833.317893] c0 throttling: set cpufreq upper limit.
- <6>[ 836.315043] c0 change state: 1st throttle->normal.
- <6>[ 837.315090] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 837.318374] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 838.847362] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 838.847391] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 838.847415] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 838.848214] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 840.023993] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 841.020814] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 841.025612] c0 throttling: set cpufreq upper limit.
- <6>[ 843.381274] c1 lcd panel: id=2 brightness=5, bl=0, candela=30
- <6>[ 844.025062] c0 change state: 1st throttle->normal.
- <6>[ 845.025066] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 845.026336] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 845.239308] c1 lcd panel: id=2 brightness=255, bl=20, candela=300
- <6>[ 847.795141] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 848.796266] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 848.798818] c0 throttling: set cpufreq upper limit.
- <6>[ 848.882554] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 848.882589] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 848.882620] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 848.883433] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 851.440283] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 851.440825] c1 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=712
- <6>[ 851.440880] c1 sec-battery sec-battery: Time past : 810 secs
- <6>[ 851.440919] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 851.440967] c1 sec-battery sec-battery: soc(22), vfocv(3753), vcell(3433), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 851.442565] c1 healthd: battery l=22 v=3433 t=38.0 h=2 st=2 c=0 chg=u
- <6>[ 851.795108] c1 change state: 1st throttle->normal.
- <6>[ 852.160269] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=540
- <6>[ 852.796049] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 852.800094] c1 normal: free cpufreq_limit & interrupt enable.
- <6>[ 855.309841] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 856.306291] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 856.306897] c0 throttling: set cpufreq upper limit.
- <6>[ 858.902570] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 858.902621] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 858.902673] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 858.903614] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 859.305098] c0 change state: 1st throttle->normal.
- <6>[ 860.305085] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 860.310177] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 862.741026] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 863.740758] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 863.750131] c0 throttling: set cpufreq upper limit.
- <6>[ 866.750061] c0 change state: 1st throttle->normal.
- <6>[ 867.750086] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 867.754762] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 868.922438] c0 max17042 9-0036: max17042_get_soc : soc(1618)
- <6>[ 868.922481] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 868.922510] c0 max17042 9-0036: max17042_get_soc : use raw (22), soc (22)
- <6>[ 868.923310] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 870.231867] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 871.236275] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 871.245184] c0 throttling: set cpufreq upper limit.
- <6>[ 874.246349] c0 change state: 1st throttle->normal.
- <6>[ 875.245071] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 875.255136] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 877.645167] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 878.661209] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 878.662466] c0 throttling: set cpufreq upper limit.
- <6>[ 878.942541] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 878.942579] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 878.942611] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 878.943435] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 881.660077] c0 change state: 1st throttle->normal.
- <6>[ 882.240274] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=520
- <6>[ 882.660087] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 882.664989] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 885.040587] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 886.041324] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 886.050173] c0 throttling: set cpufreq upper limit.
- <6>[ 888.962578] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 888.962630] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 888.962671] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 888.963891] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 889.060082] c0 change state: 1st throttle->normal.
- <6>[ 890.060081] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 890.060858] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 891.520225] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 891.520736] c0 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=708
- <6>[ 891.520780] c0 sec-battery sec-battery: Time past : 850 secs
- <6>[ 891.520809] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 891.520850] c0 sec-battery sec-battery: soc(21), vfocv(3753), vcell(3786), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 891.521922] c1 healthd: battery l=21 v=3786 t=38.0 h=2 st=2 c=0 chg=u
- <6>[ 892.465815] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 893.471212] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 893.481279] c0 throttling: set cpufreq upper limit.
- <6>[ 896.485073] c0 change state: 1st throttle->normal.
- <6>[ 897.490077] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 897.496420] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 898.992400] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 898.992429] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 898.992451] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 898.993249] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 899.724050] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 900.720752] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 900.730127] c0 throttling: set cpufreq upper limit.
- <6>[ 903.730070] c0 change state: 1st throttle->normal.
- <6>[ 904.555006] c1 lcd panel: id=2 brightness=5, bl=0, candela=30
- <6>[ 904.740097] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 904.749284] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 906.545952] c1 s3cfb s3cfb.0: change blank mode=4, fb2
- <6>[ 906.545982] c1 lcd panel: ld9040_power_off
- <6>[ 909.003132] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 909.003204] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 909.003255] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 909.004142] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 912.325276] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=540
- <6>[ 919.022539] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 919.022608] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 919.022660] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 919.023530] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 929.042538] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 929.042610] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 929.042662] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 929.043569] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 929.999672] c1 s3cfb s3cfb.0: change blank mode=0, fb2
- <6>[ 929.999754] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 929.999884] c1 lcd panel: ld9040_power_on
- <6>[ 930.188760] c0 lcd panel: id=2 brightness=0, bl=0, candela=30
- <6>[ 930.191145] c0 lcd panel: id=2 brightness=255, bl=20, candela=300
- <6>[ 931.600289] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 931.600789] c0 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=704
- <6>[ 931.600828] c0 sec-battery sec-battery: Time past : 890 secs
- <6>[ 931.600859] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 931.600897] c0 sec-battery sec-battery: soc(21), vfocv(3753), vcell(3713), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 931.602240] c1 healthd: battery l=21 v=3713 t=38.0 h=2 st=2 c=0 chg=u
- <6>[ 931.620516] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 932.824483] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 933.821234] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 933.826257] c0 throttling: set cpufreq upper limit.
- <6>[ 936.825101] c0 change state: 1st throttle->normal.
- <6>[ 937.825086] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 937.829674] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 939.062340] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 939.062369] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 939.062391] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 939.063147] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 940.297425] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 941.296267] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 941.300456] c0 throttling: set cpufreq upper limit.
- <6>[ 944.305089] c0 change state: 1st throttle->normal.
- <6>[ 945.305106] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 945.310236] c0 normal: free cpufreq_limit & interrupt enable.
- <4>[ 946.508431] c1 audit_printk_skb: 6 callbacks suppressed
- <5>[ 946.508466] c1 type=1400 audit(1447058700.600:129): avc: denied { create } for pid=2032 comm="updater" name="libbluetooth_jni.so" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file
- <5>[ 946.535835] c1 type=1400 audit(1447058700.630:130): avc: denied { relabelfrom } for pid=2032 comm="updater" name="lost+found" dev=mmcblk0p9 ino=11 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <5>[ 946.535931] c1 type=1400 audit(1447058700.630:131): avc: denied { relabelto } for pid=2032 comm="updater" name="lost+found" dev=mmcblk0p9 ino=11 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <5>[ 946.536116] c1 type=1400 audit(1447058700.630:132): avc: denied { relabelfrom } for pid=2032 comm="updater" name="msaa" dev=mmcblk0p9 ino=49154 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
- <5>[ 946.536207] c1 type=1400 audit(1447058700.630:133): avc: denied { relabelto } for pid=2032 comm="updater" name="msaa" dev=mmcblk0p9 ino=49154 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
- <5>[ 946.539631] c1 type=1400 audit(1447058700.630:134): avc: denied { relabelfrom } for pid=2032 comm="updater" name="libbluetooth_jni.so" dev=mmcblk0p9 ino=33012 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file
- <5>[ 946.539729] c1 type=1400 audit(1447058700.630:135): avc: denied { relabelto } for pid=2032 comm="updater" name="libbluetooth_jni.so" dev=mmcblk0p9 ino=33012 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file
- <5>[ 946.548538] c1 type=1400 audit(1447058700.640:136): avc: denied { relabelfrom } for pid=2032 comm="updater" name="app_process32" dev=mmcblk0p9 ino=16388 scontext=u:r:init:s0 tcontext=u:object_r:zygote_exec:s0 tclass=file
- <5>[ 946.549244] c1 type=1400 audit(1447058700.640:137): avc: denied { relabelfrom } for pid=2032 comm="updater" name="bootanimation" dev=mmcblk0p9 ino=16400 scontext=u:r:init:s0 tcontext=u:object_r:bootanim_exec:s0 tclass=file
- <5>[ 946.549605] c1 type=1400 audit(1447058700.640:138): avc: denied { relabelfrom } for pid=2032 comm="updater" name="clatd" dev=mmcblk0p9 ino=16405 scontext=u:r:init:s0 tcontext=u:object_r:clatd_exec:s0 tclass=file
- <6>[ 946.660819] c1 SELinux: Context u:object_r:blkid_exec:s0 is not valid (left unmapped).
- <6>[ 946.661757] c1 SELinux: Context u:object_r:fsck_exec:s0 is not valid (left unmapped).
- <6>[ 946.662053] c1 SELinux: Context u:object_r:gatekeeperd_exec:s0 is not valid (left unmapped).
- <6>[ 946.662735] c1 SELinux: Context u:object_r:logcat_exec:s0 is not valid (left unmapped).
- <6>[ 946.664141] c1 SELinux: Context u:object_r:sgdisk_exec:s0 is not valid (left unmapped).
- <6>[ 946.664571] c1 SELinux: Context u:object_r:toolbox_exec:s0 is not valid (left unmapped).
- <6>[ 946.664786] c1 SELinux: Context u:object_r:tzdatacheck_exec:s0 is not valid (left unmapped).
- <6>[ 946.666153] c1 SELinux: Context u:object_r:userinit_exec:s0 is not valid (left unmapped).
- <6>[ 946.674690] c1 SELinux: Context u:object_r:perfprofd_exec:s0 is not valid (left unmapped).
- <6>[ 946.674922] c1 SELinux: Context u:object_r:procrank_exec:s0 is not valid (left unmapped).
- <6>[ 947.186078] c1 EXT4-fs (mmcblk0p9): re-mounted. Opts: user_xattr,barrier=1,data=ordered
- <6>[ 947.194470] c0 EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- <6>[ 947.233381] c0 EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- <6>[ 947.257694] c0 EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- <6>[ 947.278970] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 947.301836] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <6>[ 947.442345] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 948.440779] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 948.447333] c0 throttling: set cpufreq upper limit.
- <6>[ 949.082540] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 949.082575] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 949.082603] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 949.083423] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <4>[ 953.180518] c1 audit_printk_skb: 201 callbacks suppressed
- <5>[ 953.180551] c1 type=1400 audit(1447058707.275:206): avc: denied { unlink } for pid=2890 comm="rm" name="app_process" dev=mmcblk0p9 ino=16516 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file
- <5>[ 953.503277] c1 type=1400 audit(1447058707.595:207): avc: denied { rename } for pid=2931 comm="mv" name="app_process32" dev=mmcblk0p9 ino=16388 scontext=u:r:init:s0 tcontext=u:object_r:zygote_exec:s0 tclass=file
- <6>[ 954.912156] c1 warning: `su' uses 32-bit capabilities (legacy support in use)
- <6>[ 955.490123] c0 change state: 1st throttle->normal.
- <6>[ 956.490200] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 956.500425] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 959.142416] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 959.142445] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 959.142468] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 959.143299] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 959.368766] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
- <7>[ 959.368831] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 959.393059] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
- <7>[ 959.393111] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 959.404470] c0 EXT4-fs (mmcblk0p9): re-mounted. Opts: user_xattr,barrier=1,data=ordered
- <6>[ 959.410102] c0 EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
- <6>[ 960.420099] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <5>[ 961.115781] c1 type=1400 audit(1447058715.210:208): avc: denied { rmdir } for pid=3509 comm="rm" name="Provision" dev=mmcblk0p9 ino=32831 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
- <3>[ 961.327809] c1 init: untracked pid 3544 exited with status 0
- <6>[ 961.421263] c1 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 961.430148] c1 throttling: set cpufreq upper limit.
- <3>[ 961.551437] c1 init: untracked pid 3574 exited with status 0
- <3>[ 961.818789] c1 init: untracked pid 3596 exited with status 0
- <3>[ 962.195433] c0 init: untracked pid 3618 exited with status 0
- <3>[ 962.384730] c0 init: untracked pid 3640 exited with status 0
- <3>[ 962.868252] c0 init: untracked pid 3662 exited with status 0
- <6>[ 966.430053] c0 change state: 1st throttle->normal.
- <6>[ 967.430066] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 967.433713] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 968.775764] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 969.162623] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 969.162699] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 969.162752] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 969.163632] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 969.775799] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 969.781963] c0 throttling: set cpufreq upper limit.
- <6>[ 971.680494] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 971.681182] c0 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=700
- <6>[ 971.681291] c0 sec-battery sec-battery: Time past : 930 secs
- <6>[ 971.681377] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 971.681489] c0 sec-battery sec-battery: soc(21), vfocv(3752), vcell(3335), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 971.684640] c1 healthd: battery l=21 v=3335 t=38.0 h=2 st=2 c=0 chg=u
- <6>[ 974.780101] c0 change state: 1st throttle->normal.
- <6>[ 975.780119] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 975.784473] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 976.719836] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 977.716249] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 977.722675] c0 throttling: set cpufreq upper limit.
- <6>[ 979.187691] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 979.187732] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 979.187767] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 979.188636] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 982.720086] c0 change state: 1st throttle->normal.
- <6>[ 983.720091] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 983.725197] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 984.836889] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 985.836189] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 985.841096] c0 throttling: set cpufreq upper limit.
- <6>[ 989.202491] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 989.202528] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 989.202556] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 989.203366] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 991.840101] c0 change state: 1st throttle->normal.
- <6>[ 992.840103] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 992.845739] c0 normal: free cpufreq_limit & interrupt enable.
- <3>[ 993.642949] c1 init: untracked pid 3690 exited with status 0
- <6>[ 993.961874] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <3>[ 994.393540] c0 init: untracked pid 3715 exited with status 0
- <6>[ 994.961209] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 994.968242] c0 throttling: set cpufreq upper limit.
- <3>[ 996.692896] c1 init: untracked pid 3738 exited with status 0
- <3>[ 998.245235] c1 init: untracked pid 3760 exited with status 0
- <6>[ 999.222629] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 999.222675] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 999.222712] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 999.223564] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 999.965074] c0 change state: 1st throttle->normal.
- <6>[ 1000.965060] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 1000.971231] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 1003.456634] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 1004.456255] c0 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 1004.461723] c0 throttling: set cpufreq upper limit.
- <3>[ 1004.951749] c1 init: untracked pid 3783 exited with status 0
- <3>[ 1005.577687] c1 init: untracked pid 3806 exited with status 0
- <3>[ 1006.441355] c1 init: untracked pid 3828 exited with status 0
- <3>[ 1007.134283] c1 init: untracked pid 3853 exited with status 0
- <5>[ 1007.693869] c0 type=1400 audit(1447058761.785:209): avc: denied { append } for pid=3110 comm="updater" name="70-gapps.sh" dev=mmcblk0p9 ino=57700 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
- <6>[ 1009.242758] c0 max17042 9-0036: max17042_get_soc : soc(155f)
- <6>[ 1009.242805] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 1009.242846] c0 max17042 9-0036: max17042_get_soc : use raw (21), soc (21)
- <6>[ 1009.243737] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 1011.460155] c0 change state: 1st throttle->normal.
- <6>[ 1011.760273] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 1011.760813] c0 sec-battery sec-battery: sec_bat_check_temper: temp=390, adc=692
- <6>[ 1011.760862] c0 sec-battery sec-battery: Time past : 970 secs
- <6>[ 1011.760898] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 1011.760944] c0 sec-battery sec-battery: soc(21), vfocv(3752), vcell(3731), temp(39), charging(1), health(1), chg_adc(0)
- <4>[ 1011.762694] c1 healthd: battery l=21 v=3731 t=39.0 h=2 st=2 c=0 chg=u
- <6>[ 1012.460163] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 1012.465193] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 1013.488142] c0 EXYNOS4212_tmu interrupt: INTSTAT = 0x00000001
- <6>[ 1014.485786] c1 notify_change_of_tmu_state: uevent: 1, name = TMUSTATE=1
- <6>[ 1014.487156] c1 throttling: set cpufreq upper limit.
- <5>[ 1017.862639] c0 type=1400 audit(1447058771.955:210): avc: denied { remove_name } for pid=6418 comm="cp" name="open_gapps_log.txt" dev=mmcblk0p11 ino=160 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir
- <5>[ 1017.862754] c0 type=1400 audit(1447058771.955:211): avc: denied { unlink } for pid=6418 comm="cp" name="open_gapps_log.txt" dev=mmcblk0p11 ino=160 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
- <6>[ 1019.293166] c0 max17042 9-0036: max17042_get_soc : soc(14a5)
- <6>[ 1019.293248] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 1019.293309] c0 max17042 9-0036: max17042_get_soc : use raw (20), soc (20)
- <6>[ 1019.294648] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 1019.490086] c0 change state: 1st throttle->normal.
- <6>[ 1020.490116] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 1020.490789] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 1021.182525] c0 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
- <7>[ 1021.182581] c0 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
- <6>[ 1021.229265] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 1021.229333] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 1021.294595] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 1021.294652] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 1021.442496] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 1029.164016] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 1029.342436] c0 max17042 9-0036: max17042_get_soc : soc(14a5)
- <6>[ 1029.342464] c0 max17042_need_soc_recal: HW(0xe)
- <6>[ 1029.342486] c0 max17042 9-0036: max17042_get_soc : use raw (20), soc (20)
- <6>[ 1029.343252] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 1031.299491] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 1032.006732] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
- <7>[ 1032.006802] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
- <6>[ 1032.626897] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 1032.626950] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 1032.674598] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 1032.674656] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 1032.733245] c0 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 1032.733315] c0 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[ 1032.757192] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 1032.757260] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 1033.624093] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 1034.400773] c1 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 1034.506387] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 1034.506437] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <5>[ 1034.507132] c1 type=1400 audit(1447058788.600:212): avc: denied { rename } for pid=1861 comm="recovery" name="recovery-from-boot.p" dev=mmcblk0p9 ino=13 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
- <6>[ 1034.586832] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 1034.586880] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 1034.672676] c0 SysRq : Emergency Remount R/O
- <6>[ 1034.700341] c0 EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
- <6>[ 1034.706951] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
- <4>[ 1034.707102] c0 Emergency Remount complete
- <0>[ 1034.785839] c1 (sec_debug_set_upload_magic) 0
- <6>[ 1034.789018] c1 REBOOT Notifier for CPUFREQ
- <6>[ 1034.789058] c1 REBOOT Notifier for BUSFREQ
- <3>[ 1034.789079] c1 hotplug_reboot_notifier_call: disabling pm hotplug
- <6>[ 1034.794944] c1 mif: xmm6260_off: xmm6260_off()
- <6>[ 1034.795325] c1 mc1n2_i2c_shutdown
- <7>[ 1034.796033] c0 pmu_debug: 0x00000901
- <6>[ 1034.806600] c0 mc1n2_i2c_shutdown done
- <6>[ 1034.806634] c0 max8997-muic max8997-muic: max8997_muic_shutdown: JIGSet: auto detection
- <6>[ 1034.807062] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: disable WTSR
- <6>[ 1034.830279] c0 max8997_rtc_shutdown: WTSR_SMPL reg(0x80)
- <6>[ 1034.830309] c0 max8997_rtc_shutdown: success to disable WTSR
- <6>[ 1034.830395] c0 k3dh_shutdown: is called.
- <6>[ 1034.830609] c0 pn544_shutdown
- <6>[ 1034.831503] c0 sdhci_shutdown_host : MMC Card OFF
- <4>[ 1034.831627] c0 Disabling non-boot CPUs ...
- <4>[ 1034.832003] c1 IRQ112 no longer affine to CPU1
- <5>[ 1034.832221] c0 CPU1: shutdown
- <0>[ 1034.832872] c0 Restarting system with command ''.
- <0>[ 1034.836208] c0 pid = 1 name:init
- <0>[ 1034.839371] c0 sec_reboot (104, )
- Ibl: pbl_read_emmc441() read 8k
- Ibl: pbl_read_emmc441() read 96k
- Ibl: pbl_read_emmc441() read download info
- Ibl: pbl_read_emmc441() endop
- Ibl: jump() verify_binary_integrity...ok
- Ibl: jump() jump!!!
- Welcome to Samsung Primitive Bootloader.
- build time: Sep 19 2012 18:31:37
- current time: 0/1/7 0:17:14
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- <display_card_info:1009> ext_csd
- <display_card_info:1011>card_size: 15028
- Total Card Size: 15029 MByte
- mmc_init: card initialization completed!
- pbl found bootable sbl in #49152.
- jump to sbl 0x4d400000.
- Secondary Bootloader v3.1 version.
- Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
- Board: C1 REV 02 / Sep 19 2012 18:31:42
- current time: 0/1/7 0:17:15
- booting code=0x0
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- CID:150100 56594c30 304d1966 b7260f8e
- <display_card_info:1046> ext_csd
- <display_card_info:1048>card_size: 15028
- Total Card Size: 15029 MByte
- Total Sector Count: 30777344
- MoviNand Initialization Complete!
- ===== PARTITION INFORMATION =====
- ID : GANG (0x0)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : BOOT (0x1)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : EFS (0x4)
- DEVICE : MMC
- FIRST UNIT : 8192
- NO. UNITS : 40960
- =================================
- ID : SBL1 (0x2)
- DEVICE : MMC
- FIRST UNIT : 49152
- NO. UNITS : 2560
- =================================
- ID : SBL2 (0x3)
- DEVICE : MMC
- FIRST UNIT : 53248
- NO. UNITS : 2560
- =================================
- ID : PARAM (0x5)
- DEVICE : MMC
- FIRST UNIT : 57344
- NO. UNITS : 16384
- =================================
- ID : KERNEL (0x6)
- DEVICE : MMC
- FIRST UNIT : 73728
- NO. UNITS : 16384
- =================================
- ID : RECOVERY (0x7)
- DEVICE : MMC
- FIRST UNIT : 90112
- NO. UNITS : 16384
- =================================
- ID : CACHE (0x8)
- DEVICE : MMC
- FIRST UNIT : 106496
- NO. UNITS : 204800
- =================================
- ID : MODEM (0x9)
- DEVICE : MMC
- FIRST UNIT : 311296
- NO. UNITS : 32768
- =================================
- ID : FACTORYFS (0xa)
- DEVICE : MMC
- FIRST UNIT : 344064
- NO. UNITS : 2097152
- =================================
- ID : DATAFS (0xb)
- DEVICE : MMC
- FIRST UNIT : 2441216
- NO. UNITS : 12582912
- =================================
- ID : UMS (0xc)
- DEVICE : MMC
- FIRST UNIT : 15024128
- NO. UNITS : 14696448
- =================================
- ID : HIDDEN (0xd)
- DEVICE : MMC
- FIRST UNIT : 29720576
- NO. UNITS : 1048576
- =================================
- loke_init: j4fs_open..success
- <start_checksum:1033>CHECKSUM_HEADER_SECTOR :42
- <start_checksum:1035>offset:42, size:1024
- Not Need Movinand Checksum
- load_lfs_parameters valid magic code and version.
- switch_sel_str='1'
- load_debug_level: read debug level successfully(0x574f4c44)...LOW
- init_ddi_data: usable ddi data.
- init_fuel_gauge : not por status
- fuel_gauge_get_version: [1]=0, [0]=92
- init_fuel_gauge: vcell = 3936 mV, vfocv = 3751 mV, soc = 20
- init_fuel_gauge : check s/w reset (20000000) : use wide tolerance
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- 6392 = (392100 - 350354)*15312/100000
- [3] 389178 = (6392 * 100000) / 11164 + 331923
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL2:0x3a
- init_microusb_ic: MUIC: CONTROL2:0x3a
- reading nps status file is successfully!.
- nps status=0x504d4f43
- PMIC_IRQSRC = 0x0
- PMIC_IRQ1 = 0xc0
- PMIC_IRQ2 = 0x18
- PMIC_IRQ3 = 0x0
- PMIC_IRQ4 = 0x11
- PMIC_STATUS1 = 0x2
- PMIC_STATUS2 = 0x16
- PMIC_STATUS3 = 0x3
- PMIC_STATUS4 = 0x22
- bootloader base address=0x4d400000
- LPDDR0 1st. cached=0x40000000, size=0xe400000
- LPDDR0 non-cached=0x4e400000, size=0xa00000
- LPDDR0 2nd. cached=0x4ee00000, size=0x1200000
- RST_STAT = 0x20000000
- get_hwrev() = 14
- board_process_platform: MAGIC 0 at 40000000!
- check_reboot: INFORM3 = 12345670
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- hw_pm_status: jig_status = 0, chg_status = 1
- s5p_set_high_clk: ARM Clock = 800MHz.
- ......kernel is non signed binary.
- DISPLAY_PATH_SEL[MDNIE 0x1]is on
- div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520
- MDNIE setting Init start!!
- vsync interrupt is off
- video interrupt is off
- [fb0] turn on
- MDNIE setting Init end!!
- Autoboot (0 seconds) in progress, press any key to stop
- boot_kernel: debug level low!
- checkbit: find RECOVERY
- checkbit (ffffffff)
- ......kernel is non signed binary.
- ATAG_CORE: 5 54410001 0 0 0
- MEMCONFIG: 20e01323 20e01323
- ATAG_MEM: 4 54410002 10000000 40000000
- ATAG_MEM: 4 54410002 10000000 50000000
- ATAG_MEM: 4 54410002 10000000 60000000
- ATAG_MEM: 4 54410002 10000000 70000000
- ATAG_SERIAL: 4 54410006 b7260f8e 304d1966
- ATAG_REVISION: 3 54410007 e
- hardware_ID : 001966b7260f8e
- ATAG_CMDLINE: 40 54410009 'loglevel=4 console=ram androidboot.serialno=001966b7260f8e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m'
- ATAG_NONE: 0 0
- Starting kernel at 0x40008000...
- <6>[ 0.182584] c0 audit: initializing netlink socket (disabled)
- <5>[ 0.182650] c0 type=2000 audit(0.180:1): initialized
- <4>[ 0.183225] c0 highmem bounce pool size: 64 pages
- <6>[ 0.183487] c0 ashmem: initialized
- <6>[ 0.196718] c1 fuse init (API version 7.16)
- <6>[ 0.197180] c1 msgmni has been set to 1101
- <7>[ 0.197306] c1 SELinux: Registering netfilter hooks
- <6>[ 0.197785] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197819] c1 FIPS: No test for cipher_null (cipher_null-generic)
- <6>[ 0.197924] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197957] c1 FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
- <6>[ 0.198056] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198090] c1 FIPS: No test for digest_null (digest_null-generic)
- <6>[ 0.198187] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198219] c1 FIPS: No test for compress_null (compress_null-generic)
- <6>[ 0.198321] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198397] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
- <6>[ 0.198506] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198573] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
- <6>[ 0.198681] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198752] c1 FIPS: self-tests for sha1-generic (sha1) passed
- <6>[ 0.198858] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198921] c1 FIPS: self-tests for sha224-generic (sha224) passed
- <6>[ 0.199028] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199082] c1 FIPS: self-tests for sha256-generic (sha256) passed
- <6>[ 0.199188] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199411] c1 FIPS: self-tests for sha384-generic (sha384) passed
- <6>[ 0.199522] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199735] c1 FIPS: self-tests for sha512-generic (sha512) passed
- <6>[ 0.199859] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199918] c0 FIPS: self-tests for des-generic (des) passed
- <6>[ 0.200222] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200285] c0 FIPS: self-tests for des3_ede-generic (des3_ede) passed
- <6>[ 0.200400] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200433] c0 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
- <6>[ 0.200535] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200621] c0 FIPS: self-tests for aes-generic (aes) passed
- <6>[ 0.200730] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200764] c0 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
- <6>[ 0.200865] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201373] c0 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
- <6>[ 0.201510] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201599] c0 FIPS: self-tests for crc32c-generic (crc32c) passed
- <6>[ 0.201714] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201747] c0 FIPS: No test for stdrng (krng)
- <6>[ 0.201838] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.224792] c0 FIPS: self-tests for ansi_cprng (stdrng) passed
- <6>[ 0.224917] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.224951] c0 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
- <6>[ 0.225200] c1 FIPS: self-tests for non-FIPS md5 (md5) passed
- <6>[ 0.225340] c1 FIPS: self-tests for sha1 (sha1) passed
- <6>[ 0.225762] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.225851] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.226171] c0 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
- <6>[ 0.226758] c1 FIPS: self-tests for ecb(des) (ecb(des)) passed
- <6>[ 0.227143] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227233] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227635] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227772] c0 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
- <6>[ 0.228062] c1 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
- <6>[ 0.228451] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228540] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228646] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
- <6>[ 0.228874] c1 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
- <6>[ 0.229263] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229353] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229753] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229869] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
- <6>[ 0.230166] c1 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
- <6>[ 0.230305] c1 FIPS: self-tests for non-FIPS md4 (md4) passed
- <6>[ 0.230432] c1 FIPS: self-tests for sha256 (sha256) passed
- <6>[ 0.230822] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230912] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.231116] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
- <6>[ 0.231520] c1 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
- <6>[ 0.231924] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232013] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232417] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232635] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
- <6>[ 0.233105] c1 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
- <6>[ 0.233498] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233586] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233689] c0 FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
- <6>[ 0.233903] c1 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
- <6>[ 0.234285] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234375] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234779] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234913] c0 FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
- <6>[ 0.235254] c1 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
- <6>[ 0.235653] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235747] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236153] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236269] c0 FIPS: self-tests for ctr(aes-asm) (ctr(aes)) passed
- <6>[ 0.236519] c1 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
- <6>[ 0.236905] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236995] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237400] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237814] c0 FIPS: self-tests for rfc3686(ctr(aes-asm)) (rfc3686(ctr(aes))) passed
- <6>[ 0.238652] c1 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
- <6>[ 0.239108] c1 FIPS: self-tests for sha384 (sha384) passed
- <6>[ 0.239538] c1 FIPS: self-tests for sha512 (sha512) passed
- <6>[ 0.240658] c1 FIPS: self-tests for non-FIPS deflate (deflate) passed
- <6>[ 0.241100] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.241195] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.241398] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
- <6>[ 0.241822] c1 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
- <6>[ 0.242004] c1 FIPS: self-tests for crc32c (crc32c) passed
- <6>[ 0.242131] c1 FIPS: self-tests for sha224 (sha224) passed
- <6>[ 0.242529] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.242619] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.243031] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.243395] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-asm)) (cts(cbc(aes))) passed
- <6>[ 0.244141] c1 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
- <6>[ 0.244534] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244626] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244772] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
- <6>[ 0.245114] c1 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
- <6>[ 0.245512] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.245603] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.245781] c0 FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
- <6>[ 0.246161] c1 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
- <6>[ 0.246550] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246644] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246981] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
- <6>[ 0.247679] c1 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
- <6>[ 0.248077] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.248168] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.248930] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
- <6>[ 0.250505] c1 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
- <6>[ 0.250899] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.250989] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.251744] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
- <6>[ 0.253286] c1 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
- <6>[ 0.253685] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.253775] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.253962] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
- <6>[ 0.254368] c1 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
- <6>[ 0.300367] c1 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
- <6>[ 0.300404] c1 FIPS: do kernel integrity check
- <6>[ 0.544847] c1 FIPS: integrity check passed
- <6>[ 0.545127] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.545198] c1 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
- <6>[ 0.545308] c0 io scheduler noop registered
- <6>[ 0.545336] c0 io scheduler deadline registered
- <6>[ 0.545486] c0 io scheduler cfq registered
- <6>[ 0.545857] c0 io scheduler bfq registered
- <6>[ 0.545882] c0 BFQ I/O-scheduler: v7r8
- <6>[ 0.545906] c0 io scheduler row registered
- <6>[ 0.545932] c0 io scheduler sio registered (default)
- <3>[ 0.546160] c0 s3cfb s3cfb.0: div(32) max should be 16
- <6>[ 0.546194] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
- <6>[ 0.546280] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
- <6>[ 0.546551] c1 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf28f9000, size: 0x002ee000
- <6>[ 0.548518] c1 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
- <6>[ 0.551340] c1 Bootloader sent 'bootloaderfb' : 5EC00000
- <6>[ 0.552388] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 0.552528] c0 s3cfb s3cfb.0: registered successfully
- <6>[ 0.553425] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
- <6>[ 0.553466] c0 mdnie mdnie: registered successfully
- <6>[ 0.553940] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <6>[ 0.715360] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
- <6>[ 0.760097] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
- <6>[ 0.780076] c1 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
- <6>[ 0.783882] c1 console [ttySAC2] enabled
- <6>[ 0.795090] c1 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
- <4>[ 0.840447] c1 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
- <4>[ 0.840486] c1 Mali: mali_dvfs[0].vol = 900000
- <4>[ 0.840514] c1 Mali: init_gpu_vol = 900000
- <4>[ 0.840540] c1 Mali: mali_dvfs[1].vol = 900000
- <4>[ 0.840567] c1 Mali: mali_dvfs[2].vol = 950000
- <4>[ 0.840594] c1 Mali: mali_dvfs[3].vol = 1000000
- <4>[ 0.840688] c1 Mali: init_mali_clock mali_clock c141e1cc
- <4>[ 0.863534] c1 Initializing gpu clock control interface
- <4>[ 0.863922] c1 Initializing gpu voltage control interface
- <4>[ 0.865264] c0 Mali: Mali device driver loaded
- <4>[ 0.865622] c0 UMP: UMP device driver 0000 loaded
- <6>[ 0.873386] c0 brd: module loaded
- <6>[ 0.877272] c0 loop: module loaded
- <6>[ 0.877903] c0 sec_jack_probe : Registering jack driver
- <6>[ 0.879041] c0 wake enabled for irq 378
- <6>[ 0.879554] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
- <6>[ 0.879617] c0 max8997_muic_cfg_uart_gpio: path=0
- <6>[ 0.879830] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
- <6>[ 0.880887] c0 Loading pn544 driver
- <6>[ 0.880945] c0 pn544_probe : IRQ num 367
- <6>[ 0.881146] c0 pn544_probe : requesting IRQ 367
- <6>[ 0.882968] c0 lcd panel: ld9040_probe : lcdtype : SM2_A2
- <6>[ 0.883002] c0 lcd panel: ld9040 panel driver has been probed.
- <6>[ 0.883184] c0 PPP generic driver version 2.4.2
- <6>[ 0.883508] c0 PPP Deflate Compression module registered
- <6>[ 0.883540] c0 PPP BSD Compression module registered
- <6>[ 0.883593] c0 PPP MPPE Compression module registered
- <6>[ 0.883624] c0 NET: Registered protocol family 24
- <6>[ 0.883654] c0 tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.883684] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.884046] c0 host_notifier host_notifier.0: notifier_prove
- <6>[ 0.884661] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.885180] c0 usbcore: registered new interface driver usblp
- <6>[ 0.885213] c0 Initializing USB Mass Storage driver...
- <6>[ 0.885540] c0 usbcore: registered new interface driver usb-storage
- <6>[ 0.885574] c0 USB Mass Storage support registered.
- <6>[ 0.885659] c0 otg pdata e407ed20, irq c0e35e90
- <6>[ 0.885950] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
- <6>[ 0.885989] c0 s3c-udc : version 15 March 2009
- <7>[ 0.886016] c0 init
- <7>[ 0.886514] c0 usb: android_bind disconnect
- <7>[ 0.886541] c0 usb: usb_gadget_disconnect
- <7>[ 0.888544] c1 usb: usb_string_id cdev(0xe4119120)->next_string_id=1
- <6>[ 0.888722] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.888762] c0 android_usb gadget: Number of LUNs=2
- <6>[ 0.888794] c0 lun0: LUN: removable file: (no medium)
- <6>[ 0.888824] c0 lun1: LUN: removable file: (no medium)
- <7>[ 0.889651] c0 usb: usb_string_id cdev(0xe4119120)->next_string_id=2
- <7>[ 0.889688] c0 usb: usb_string_id cdev(0xe4119120)->next_string_id=3
- <7>[ 0.889728] c0 usb: usb_string_id cdev(0xe4119120)->next_string_id=4
- <7>[ 0.889764] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
- <7>[ 0.889795] c0 usb: composite_bind bcdDevice=0x0
- <7>[ 0.889822] c0 usb: composite_bind composite_manufacturer=
- <6>[ 0.889857] c0 android_usb gadget: android_usb ready
- <6>[ 0.889885] c0 usb: Skip udc_enable
- <6>[ 0.891023] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
- <7>[ 0.891264] c0 [keys]PWR 0
- <6>[ 0.891755] c0 input: sec_touchscreen as /devices/virtual/input/input2
- <6>[ 1.010514] c0 Atmel MXT224 3-004a: family = 0x80, variant = 0x1, version= 0x16, build = 171
- <3>[ 1.010561] c0 [TSP] family = 0x80, variant = 0x1, version = 0x16, build = 171
- <3>[ 1.024692] c0 [TSP] TSP chip is MXT224
- <3>[ 1.095046] c0 [TSP] ta_status is 0
- <3>[ 1.096888] c0 [TSP] mxt224_ta_probe
- <3>[ 1.101062] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
- <3>[ 1.106147] c0 [TSP] calibration success!!!
- <3>[ 1.110221] c0 [TSP] Calibration!!!!!!
- <3>[ 1.113121] c0 [TSP] +mxt224_optical_gain()
- <3>[ 1.335463] c0 [TSP] -mxt224_optical_gain()
- <6>[ 1.365056] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
- <6>[ 1.390053] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
- <6>[ 1.415197] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
- <6>[ 1.416766] c0 using rtc device, max8997-rtc, for alarms
- <6>[ 1.416820] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
- <4>[ 1.417158] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- <6>[ 1.417544] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
- <6>[ 1.417735] c0 i2c /dev entries driver
- <6>[ 1.420454] c0 lirc_dev: IR Remote Control driver registered, major 250
- <6>[ 1.420492] c0 IR NEC protocol handler initialized
- <6>[ 1.420519] c0 IR RC5(x) protocol handler initialized
- <6>[ 1.420547] c0 IR RC6 protocol handler initialized
- <6>[ 1.420574] c0 IR JVC protocol handler initialized
- <6>[ 1.420600] c0 IR Sony protocol handler initialized
- <6>[ 1.420627] c0 IR RC5 (streamzap) protocol handler initialized
- <6>[ 1.420658] c0 IR LIRC bridge handler initialized
- <6>[ 1.420684] c0 Linux video capture interface: v2.00
- <7>[ 1.420968] c0 [S5K5BAFX] s5k5bafx_create_sysfs
- <6>[ 1.421424] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
- <6>[ 1.421494] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
- <4>[ 1.421662] c0 Initialize JPEG driver
- <4>[ 1.422123] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
- <6>[ 1.422378] c0 s5p_int_src_ext_hpd()
- <6>[ 1.422406] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.422593] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.422995] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
- <4>[ 1.423142] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
- <4>[ 1.423178] c0 i2c-core: driver [s5p_ddc] using legacy resume method
- <6>[ 1.423672] c1 MFC(Multi Function Codec - FIMV v5.x) registered successfully
- <6>[ 1.424544] c1 sii9234_cfg_gpio()
- <6>[ 1.424577] c1 Registered chained gpio int handler for interrupt 111.
- <6>[ 1.424626] c1 Registered interrupt support for gpio group 10.
- <6>[ 1.424662] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.424873] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.424984] c1 sii9234 : create mhl sysfile
- <6>[ 1.425583] c1 input: sii9234_rcp as /devices/virtual/input/input3
- <6>[ 1.426495] c1 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
- <6>[ 1.428200] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
- <6>[ 1.428314] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 1.428678] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
- <6>[ 1.428863] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 1.429715] c0 max17042 9-0036: max17042_probe : is enable (1)
- <6>[ 1.429749] c0 max17042 9-0036: max17042_init_regs
- <6>[ 1.431019] c0 max17042 9-0036: fuel alert soc (2)
- <6>[ 1.431049] c0 max17042 9-0036: max17042_alert_init
- <6>[ 1.432654] c1 wake enabled for irq 371
- <6>[ 1.433770] c1 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
- <6>[ 1.434414] c1 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
- <6>[ 1.434465] c1 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
- <6>[ 1.437040] c1 max17042 9-0036: max17042_get_soc : soc(3fb7)
- <6>[ 1.437074] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 1.437102] c1 max17042 9-0036: max17042_get_soc : use raw (63), soc (65)
- <4>[ 1.437756] c1 i2c-core: driver [max17042] using legacy suspend method
- <4>[ 1.437792] c1 i2c-core: driver [max17042] using legacy resume method
- <6>[ 1.438684] c1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 1.438771] c1 Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.438801] c1 Bluetooth: HCI H4 protocol initialized
- <6>[ 1.439334] c0 cpuidle: using governor ladder
- <6>[ 1.440138] c0 cpuidle: using governor menu
- <6>[ 1.440291] c0 mshci: Mobile Storage Host Controller Interface driver
- <6>[ 1.440327] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
- <6>[ 1.440504] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
- <3>[ 1.440779] c0 mmc0: Version ID 0x5342230a.
- <6>[ 1.443723] c0 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
- <6>[ 1.444181] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
- <6>[ 1.444454] c0 sdhci: Secure Digital Host Controller Interface driver
- <6>[ 1.444490] c0 sdhci: Copyright(c) Pierre Ossman
- <6>[ 1.444605] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
- <6>[ 1.444849] c0 mmc1: vtf_2.8v regulator found
- <3>[ 1.470364] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.474043] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.482065] c0 mmc0: cmd 8 response timeout error
- <3>[ 1.485664] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.490307] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.494994] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.499695] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.504411] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.509184] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.513956] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.518729] c0 mmc0: cmd 55 response timeout error
- <6>[ 1.541798] c1 mmc0: VYL00M: 15010056594c30304d1966b7260f8e0d
- <6>[ 1.592703] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- <6>[ 1.592891] c0 wake enabled for irq 380
- <6>[ 1.592915] c0 mmc1: card inserted.
- <6>[ 1.593005] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
- <3>[ 1.593082] c0 mmc2: no vmmc regulator found
- <6>[ 1.596159] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
- <6>[ 1.601396] c0 usbcore: registered new interface driver usbhid
- <6>[ 1.601429] c0 usbhid: USB HID core driver
- <6>[ 1.601926] c0 logger: created 2048K log 'log_main'
- <6>[ 1.602125] c0 logger: created 256K log 'log_events'
- <6>[ 1.602328] c0 logger: created 1024K log 'log_radio'
- <6>[ 1.602523] c0 logger: created 256K log 'log_system'
- <6>[ 1.602721] c0 logger: created 256K log 'log_sf'
- <6>[ 1.602758] c0 sec_getlog_supply_loggerinfo: 0xc1667350 0xc1567350 0xc1527350 0xc14e7350
- <6>[ 1.603522] c0 zram: num_devices not specified. Using default: 1
- <6>[ 1.603556] c0 zram: Creating 1 devices ...
- <6>[ 1.604245] c0 k3dh_probe: is started.
- <3>[ 1.604583] c0 using defualt position
- <6>[ 1.607282] c0 k3dh_probe: is successful.
- <6>[ 1.607867] c0 input: gyro_sensor as /devices/virtual/input/input4
- <6>[ 1.608754] c0 akm8975_probe is called.
- <6>[ 1.610272] c0 akm8975_probe: asa_x = 170, asa_y = 168, asa_z = 178
- <6>[ 1.610780] c0 Registered sensors device: magnetic_sensor
- <6>[ 1.610820] c0 akm8975_probe is successful.
- <6>[ 1.614608] c1 mmc0 : 00 : 25 : 20110416 : 0.
- <4>[ 1.615948] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.615984] c0 mmc0: power class selection to bus width 8 failed
- <4>[ 1.620762] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.620798] c0 mmc0: power class selection to bus width 8 ddr 2 failed
- <6>[ 1.627240] c0 mmc0: new high speed DDR MMC card at address 0001
- <6>[ 1.627739] c1 mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- <6>[ 1.634655] c1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
- <6>[ 1.665374] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.665735] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.669596] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.669937] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.670268] c0 mmc1: cmd 5 command timeout error
- <3>[ 1.670344] c0 cm3663_setup_reg: initial proximity value = 1
- <6>[ 1.674544] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.675815] c1 input: proximity_sensor as /devices/virtual/input/input5
- <6>[ 1.676441] c1 input: light_sensor as /devices/virtual/input/input6
- <6>[ 1.679206] c1 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
- <6>[ 1.679328] c1 audss_init: RCLK SRC[busclk]
- <6>[ 1.679425] c1 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <7>[ 1.679672] c1 pmu_debug: 0x00000900
- <6>[ 1.690097] c1 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.690139] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
- <7>[ 1.690175] c1 i2s_txctrl: Turn Off - spr is no active
- <6>[ 1.690219] c1 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.690253] c1 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.704807] c0 mmc1: new high speed SD card at address 0001
- <6>[ 1.705447] c0 mmcblk1: mmc1:0001 00000 1.89 GiB
- <6>[ 1.706639] c1 mmcblk1: p1
- <6>[ 1.754970] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
- <6>[ 1.756146] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
- <6>[ 1.764142] c0 SRP: Driver successfully probed
- <6>[ 1.764338] c0 ALSA device list:
- <6>[ 1.764361] c0 #0: U1-YMU823
- <6>[ 1.764502] c0 GACT probability NOT on
- <6>[ 1.764532] c0 Mirror/redirect action on
- <6>[ 1.764557] c0 u32 classifier
- <6>[ 1.764575] c0 Actions configured
- <6>[ 1.764598] c0 Netfilter messages via NETLINK v0.30.
- <6>[ 1.764678] c0 nf_conntrack version 0.5.0 (12392 buckets, 49568 max)
- <6>[ 1.765594] c0 ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.765657] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.765694] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.766387] c0 xt_time: kernel timezone is -0000
- <6>[ 1.767896] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.768042] c0 arp_tables: (C) 2002 David S. Miller
- <6>[ 1.768116] c0 TCP cubic registered
- <6>[ 1.768140] c0 TCP westwood registered
- <6>[ 1.769277] c0 NET: Registered protocol family 10
- <6>[ 1.771843] c0 Mobile IPv6
- <6>[ 1.771890] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.772118] c0 IPv6 over IPv4 tunneling driver
- <6>[ 1.776823] c0 NET: Registered protocol family 17
- <6>[ 1.776877] c0 NET: Registered protocol family 15
- <6>[ 1.777012] c1 Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.777054] c1 Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.777084] c1 Bluetooth: RFCOMM ver 1.11
- <6>[ 1.777109] c1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.777140] c1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.777391] c1 NET: Registered protocol family 35
- <5>[ 1.777956] c1 Registering the dns_resolver key type
- <6>[ 1.778016] c1 EXYNOS4210: Adaptive Support Voltage init
- <6>[ 1.778269] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
- <6>[ 1.778817] c0 EXYNOS4: HPM value = 20
- <6>[ 1.778873] c0 EXYNOS4: IDS value = 30
- <6>[ 1.778896] c0 <6>Support 1.2GHz
- <6>[ 1.778916] c0 <6>ASV Group for This Exynos4210 is 0x40000004
- <6>[ 1.778956] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
- <5>[ 1.779017] c0 Registering SWP/SWPB emulation handler
- <6>[ 1.779104] c0 DVFS : VDD_ARM Voltage table set with 4 Group
- <6>[ 1.779136] c0 max8997_set_arm_voltage_table
- <6>[ 1.779168] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[0]=1300000, buck1_vol[1]=26
- <6>[ 1.779374] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1250000, buck1_vol[2]=24
- <6>[ 1.779570] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1150000, buck1_vol[3]=20
- <6>[ 1.779764] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1050000, buck1_vol[4]=16
- <6>[ 1.779958] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[5]=13
- <6>[ 1.780179] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[6]=12
- <6>[ 1.780372] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
- <4>[ 1.780872] c1 ------------[ cut here ]------------
- <4>[ 1.780916] c1 WARNING: at ../../../../../../kernel/samsung/smdk4412-GeniSys/fs/sysfs/dir.c:455 sysfs_add_one+0xa4/0xc4()
- <4>[ 1.780969] c1 sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'
- <4>[ 1.781021] c1 Modules linked in:
- <4>[ 1.781043] c1 Backtrace:
- <4>[ 1.781081] c1 [<c0b5a79c>] (dump_backtrace+0x0/0x10c) from [<c10e5454>] (dump_stack+0x18/0x1c)
- <4>[ 1.781124] c1 r7:000001c7 r6:c12200c0 r5:00000009 r4:e4043ed0
- <4>[ 1.781175] c1 [<c10e543c>] (dump_stack+0x0/0x1c) from [<c0b95978>] (warn_slowpath_common+0x5c/0x6c)
- <4>[ 1.781226] c1 [<c0b9591c>] (warn_slowpath_common+0x0/0x6c) from [<c0b959c0>] (warn_slowpath_fmt+0x38/0x40)
- <4>[ 1.781274] c1 r9:00000000 r8:00000000 r7:e4043f18 r6:e42cbb70 r5:e4221000
- <4>[ 1.781319] c1 r4:c1220104
- <4>[ 1.781345] c1 [<c0b95988>] (warn_slowpath_fmt+0x0/0x40) from [<c0c7d568>] (sysfs_add_one+0xa4/0xc4)
- <4>[ 1.781390] c1 r3:e4221000 r2:c1220104
- <4>[ 1.781416] c1 r4:ffffffef
- <4>[ 1.781442] c1 [<c0c7d4c4>] (sysfs_add_one+0x0/0xc4) from [<c0c7c694>] (sysfs_add_file_mode+0x4c/0xac)
- <4>[ 1.781487] c1 r7:00000013 r6:e28f3990 r5:c14649f0 r4:e42cbb70
- <4>[ 1.781534] c1 [<c0c7c648>] (sysfs_add_file_mode+0x0/0xac) from [<c0c7c724>] (sysfs_create_file+0x30/0x44)
- <4>[ 1.781581] c1 r6:c0b99c74 r5:e28f5594 r4:c144dcf4
- <4>[ 1.781623] c1 [<c0c7c6f4>] (sysfs_create_file+0x0/0x44) from [<c0de52bc>] (create_standard_UV_interfaces+0x54/0x58)
- <4>[ 1.781687] c1 [<c0de5268>] (create_standard_UV_interfaces+0x0/0x58) from [<c0ec9c68>] (cpufreq_register_driver+0x150/0x184)
- <4>[ 1.781741] c1 r5:00000000 r4:c14e6328
- <4>[ 1.781779] c1 [<c0ec9b18>] (cpufreq_register_driver+0x0/0x184) from [<c000f954>] (exynos_cpufreq_init+0x150/0x1b0)
- <4>[ 1.781830] c1 r7:00000013 r6:c0b99c74 r5:c14bcc50 r4:c14bcc50
- <4>[ 1.781882] c1 [<c000f804>] (exynos_cpufreq_init+0x0/0x1b0) from [<c0b5092c>] (do_one_initcall+0x12c/0x184)
- <4>[ 1.781930] c1 r5:e4042020 r4:c14bc6a0
- <4>[ 1.781963] c1 [<c0b50800>] (do_one_initcall+0x0/0x184) from [<c0008ad8>] (kernel_init+0xcc/0x154)
- <4>[ 1.782015] c1 [<c0008a0c>] (kernel_init+0x0/0x154) from [<c0b99c74>] (do_exit+0x0/0x720)
- <4>[ 1.782067] c1 ---[ end trace d57dc3e9b64a919c ]---
- <6>[ 1.782101] c1 DVFS : VDD_INT Voltage table set with 4 Group
- <6>[ 1.782479] c1 exynos4_pm_hotplug_device_init: 0
- <6>[ 1.782506] c1 EXYNOS4 PM-hotplug init function
- <7>[ 1.783115] c1 mif: set_hsic_lpa_states: 281: called(s5p_usb_phy_init+0x150/0x5b0):
- <6>[ 1.783163] c1 s5p-ehci s5p-ehci: usb phy usage(2)
- <6>[ 1.783310] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <6>[ 1.783622] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <6>[ 1.783775] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <6>[ 1.790094] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- <6>[ 1.790196] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.790237] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.790281] c1 usb usb1: Product: S5P EHCI Host Controller
- <6>[ 1.790316] c1 usb usb1: Manufacturer: Linux 3.0.101r6-GeniSys.Kernel+ ehci_hcd
- <6>[ 1.790354] c1 usb usb1: SerialNumber: s5p-ehci
- <6>[ 1.790946] c1 hub 1-0:1.0: USB hub found
- <6>[ 1.790985] c1 hub 1-0:1.0: 3 ports detected
- <6>[ 1.791333] c1 CP not ready, Active State low
- <6>[ 1.791469] c1 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
- <6>[ 1.791508] c1 @@@ get_refresh_interval = 0x2e
- <6>[ 1.791537] c1 @@@ get_refresh_interval = 0x5d
- <6>[ 1.791573] c1 ** temperature set value **
- <6>[ 1.791595] c1 1st throttling stop_temp = 61, start_temp = 64
- <6>[ 1.791625] c1 2nd throttling stop_temp = 87, start_tmep = 103
- <6>[ 1.791657] c1 tripping temp = 110, s/w emergency temp = 120
- <6>[ 1.791694] c1 mem throttling stop_temp = 80, start_temp = 85
- <6>[ 1.791842] c0 exynos4210_tmu_init: triminfo = 0x0000004d, low 8bit = 0x4d, high 24 bit = 0x000000
- <6>[ 1.791900] c0 THD_TEMP:0x71: TRIG_LEV0: 0x03
- <6>[ 1.791925] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
- <6>[ 1.842129] c0 [MODEM_IF] init_modem
- <3>[ 1.842165] c0 check phone active = 94
- <6>[ 1.844451] c0 umts_modem_cfg_gpio done
- <6>[ 1.844486] c0 modem_link_pm_config_gpio done
- <3>[ 1.844753] c0 mif: modem_probe: modem_if
- <6>[ 1.849359] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
- <6>[ 1.849539] c0 wake enabled for irq 366
- <6>[ 1.849565] c0 mif: create_modemctl_device: xmm6260 is created!!!
- <6>[ 1.850097] c1 wake enabled for irq 361
- <6>[ 1.850374] c0 usbcore: registered new interface driver cdc_modem
- <6>[ 1.850420] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe4612c00)
- <6>[ 1.850461] c0 mif: hsic_create_link_device: usb : create_link_device DONE
- <3>[ 1.850502] c0 mif: modem_probe: link created: usb
- <6>[ 1.854215] c0 mif: create_io_device: Bood device = umts_boot0
- <6>[ 1.863351] c0 mif: modem_probe: Complete!!!
- <4>[ 1.865359] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
- <6>[ 1.866914] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
- <6>[ 1.867099] c0 otg host_probe start c0e238cc
- <6>[ 2.070078] c1 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <7>[ 2.070158] c1 [TouchKey] i2c_touchkey_probe
- <6>[ 2.070493] c1 input: sec_touchkey as /devices/virtual/input/input7
- <7>[ 2.125591] c0 [TouchKey] Module Version: 12
- <6>[ 2.125621] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <6>[ 2.127728] c0 max8997-rtc max8997-rtc: setting system clock to 2015-11-09 08:46:43 UTC (1447058803)
- <6>[ 2.127876] c0 ctrl->mem.size = 0x500000
- <6>[ 2.127901] c0 ctrl->mem.base = 0x70f3c000
- <6>[ 2.128023] c0
- <6>[ 2.128036] c0
- <6>[ 2.128048] c0
- <6>[ 2.128060] c0 cam_cfg_gpio: pdev->id=0
- <6>[ 2.128377] c0 FIMC0 registered successfully
- <6>[ 2.128498] c1 ctrl->mem.size = 0x0
- <6>[ 2.128521] c1 ctrl->mem.base = 0xffffffea
- <6>[ 2.128824] c1 FIMC1 registered successfully
- <6>[ 2.128950] c0 ctrl->mem.size = 0x1900000
- <6>[ 2.128978] c0 ctrl->mem.base = 0x6f63c000
- <6>[ 2.129271] c0 FIMC2 registered successfully
- <6>[ 2.129390] c1 ctrl->mem.size = 0x700000
- <6>[ 2.129414] c1 ctrl->mem.base = 0x6ef3c000
- <6>[ 2.129718] c1 FIMC3 registered successfully
- <6>[ 2.129968] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
- <6>[ 2.153099] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- <6>[ 2.153144] c0 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
- <6>[ 2.153577] c0 sec_bat_get_lpcharging_state: LP charging:0
- <4>[ 2.154260] c0 Initializing charge current control interface
- <6>[ 2.154648] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
- <6>[ 2.154974] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 2.155164] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 2.155547] c1 sec-battery sec-battery: sec_bat_check_temper: temp=380, adc=714
- <6>[ 2.155600] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 2.155669] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 2.155718] c1 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3927), temp(38), charging(1), health(1), chg_adc(0)
- <4>[ 2.156851] c0 Warning: unable to open an initial console.
- <6>[ 2.158779] c0 Freeing init memory: 11552K
- <5>[ 2.213230] c0 init: init started!
- <3>[ 2.214494] c0 SELinux: policydb version 30 does not match my version range 15-26
- <3>[ 2.220796] c0 init: SELinux: Could not load policy: Invalid argument
- <3>[ 2.227361] c0 init: failed to load policy: Invalid argument
- <3>[ 2.232895] c0 init: Security failure; rebooting into recovery mode...
- <6>[ 2.239480] c0 SysRq : Emergency Remount R/O
- <4>[ 2.243672] c0 Emergency Remount complete
- <0>[ 2.243953] c0 (sec_debug_set_upload_magic) 0
- <6>[ 2.248417] c0 REBOOT Notifier for CPUFREQ
- <6>[ 2.249074] c0 REBOOT Notifier for BUSFREQ
- <3>[ 2.249105] c0 hotplug_reboot_notifier_call: disabling pm hotplug
- <6>[ 2.254140] c0 mif: xmm6260_off: xmm6260_off()
- <6>[ 2.255291] c0 mc1n2_i2c_shutdown
- <7>[ 2.256094] c0 pmu_debug: 0x00000901
- <6>[ 2.266121] c0 mc1n2_i2c_shutdown done
- <6>[ 2.266157] c0 max8997-muic max8997-muic: max8997_muic_shutdown: JIGSet: auto detection
- <6>[ 2.266531] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: disable WTSR
- <6>[ 2.290227] c0 max8997_rtc_shutdown: WTSR_SMPL reg(0x80)
- <6>[ 2.290261] c0 max8997_rtc_shutdown: success to disable WTSR
- <6>[ 2.290350] c0 k3dh_shutdown: is called.
- <6>[ 2.290541] c0 pn544_shutdown
- <6>[ 2.291408] c0 sdhci_shutdown_host : MMC Card OFF
- <4>[ 2.291540] c0 Disabling non-boot CPUs ...
- <4>[ 2.291989] c1 IRQ112 no longer affine to CPU1
- <5>[ 2.292207] c0 CPU1: shutdown
- <0>[ 2.292687] c0 Restarting system with command 'recovery'.
- <0>[ 2.296674] c0 pid = 1 name:init
- <0>[ 2.299884] c0 sec_reboot (104, recovery)
- Ibl: pbl_read_emmc441() read 8k
- Ibl: pbl_read_emmc441() read 96k
- Ibl: pbl_read_emmc441() read download info
- Ibl: pbl_read_emmc441() endop
- Ibl: jump() verify_binary_integrity...ok
- Ibl: jump() jump!!!
- Welcome to Samsung Primitive Bootloader.
- build time: Sep 19 2012 18:31:37
- current time: 0/1/7 0:17:28
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- <display_card_info:1009> ext_csd
- <display_card_info:1011>card_size: 15028
- Total Card Size: 15029 MByte
- mmc_init: card initialization completed!
- pbl found bootable sbl in #49152.
- jump to sbl 0x4d400000.
- Secondary Bootloader v3.1 version.
- Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
- Board: C1 REV 02 / Sep 19 2012 18:31:42
- current time: 0/1/7 0:17:29
- booting code=0x0
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- CID:150100 56594c30 304d1966 b7260f8e
- <display_card_info:1046> ext_csd
- <display_card_info:1048>card_size: 15028
- Total Card Size: 15029 MByte
- Total Sector Count: 30777344
- MoviNand Initialization Complete!
- ===== PARTITION INFORMATION =====
- ID : GANG (0x0)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : BOOT (0x1)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : EFS (0x4)
- DEVICE : MMC
- FIRST UNIT : 8192
- NO. UNITS : 40960
- =================================
- ID : SBL1 (0x2)
- DEVICE : MMC
- FIRST UNIT : 49152
- NO. UNITS : 2560
- =================================
- ID : SBL2 (0x3)
- DEVICE : MMC
- FIRST UNIT : 53248
- NO. UNITS : 2560
- =================================
- ID : PARAM (0x5)
- DEVICE : MMC
- FIRST UNIT : 57344
- NO. UNITS : 16384
- =================================
- ID : KERNEL (0x6)
- DEVICE : MMC
- FIRST UNIT : 73728
- NO. UNITS : 16384
- =================================
- ID : RECOVERY (0x7)
- DEVICE : MMC
- FIRST UNIT : 90112
- NO. UNITS : 16384
- =================================
- ID : CACHE (0x8)
- DEVICE : MMC
- FIRST UNIT : 106496
- NO. UNITS : 204800
- =================================
- ID : MODEM (0x9)
- DEVICE : MMC
- FIRST UNIT : 311296
- NO. UNITS : 32768
- =================================
- ID : FACTORYFS (0xa)
- DEVICE : MMC
- FIRST UNIT : 344064
- NO. UNITS : 2097152
- =================================
- ID : DATAFS (0xb)
- DEVICE : MMC
- FIRST UNIT : 2441216
- NO. UNITS : 12582912
- =================================
- ID : UMS (0xc)
- DEVICE : MMC
- FIRST UNIT : 15024128
- NO. UNITS : 14696448
- =================================
- ID : HIDDEN (0xd)
- DEVICE : MMC
- FIRST UNIT : 29720576
- NO. UNITS : 1048576
- =================================
- loke_init: j4fs_open..success
- <start_checksum:1033>CHECKSUM_HEADER_SECTOR :42
- <start_checksum:1035>offset:42, size:1024
- Not Need Movinand Checksum
- load_lfs_parameters valid magic code and version.
- switch_sel_str='1'
- load_debug_level: read debug level successfully(0x574f4c44)...LOW
- init_ddi_data: usable ddi data.
- init_fuel_gauge : not por status
- fuel_gauge_get_version: [1]=0, [0]=92
- init_fuel_gauge: vcell = 3958 mV, vfocv = 3890 mV, soc = 63
- init_fuel_gauge : check s/w reset (20000000) : use wide tolerance
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- 6729 = (394300 - 350354)*15312/100000
- [3] 392197 = (6729 * 100000) / 11164 + 331923
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL2:0x3a
- init_microusb_ic: MUIC: CONTROL2:0x3a
- reading nps status file is successfully!.
- nps status=0x504d4f43
- PMIC_IRQSRC = 0x0
- PMIC_IRQ1 = 0x0
- PMIC_IRQ2 = 0x18
- PMIC_IRQ3 = 0x0
- PMIC_IRQ4 = 0x11
- PMIC_STATUS1 = 0x2
- PMIC_STATUS2 = 0x16
- PMIC_STATUS3 = 0x3
- PMIC_STATUS4 = 0x1a
- bootloader base address=0x4d400000
- LPDDR0 1st. cached=0x40000000, size=0xe400000
- LPDDR0 non-cached=0x4e400000, size=0xa00000
- LPDDR0 2nd. cached=0x4ee00000, size=0x1200000
- RST_STAT = 0x20000000
- get_hwrev() = 14
- board_process_platform: MAGIC 0 at 40000000!
- check_reboot: INFORM3 = 12345674
- save param.blk, size: 5268
- ...save param.blk successfully.
- save switch_sel(1)...ok
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- hw_pm_status: jig_status = 0, chg_status = 1
- s5p_set_high_clk: ARM Clock = 800MHz.
- ......kernel is non signed binary.
- DISPLAY_PATH_SEL[MDNIE 0x1]is on
- div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520
- MDNIE setting Init start!!
- vsync interrupt is off
- video interrupt is off
- [fb0] turn on
- MDNIE setting Init end!!
- Autoboot (0 seconds) in progress, press any key to stop
- boot_kernel: debug level low!
- checkbit: find RECOVERY
- checkbit (ffffffff)
- ......kernel is non signed binary.
- ATAG_CORE: 5 54410001 0 0 0
- MEMCONFIG: 20e01323 20e01323
- ATAG_MEM: 4 54410002 10000000 40000000
- ATAG_MEM: 4 54410002 10000000 50000000
- ATAG_MEM: 4 54410002 10000000 60000000
- ATAG_MEM: 4 54410002 10000000 70000000
- ATAG_SERIAL: 4 54410006 b7260f8e 304d1966
- ATAG_REVISION: 3 54410007 e
- hardware_ID : 001966b7260f8e
- ATAG_CMDLINE: 47 54410009 'loglevel=4 console=ram bootmode=2 s3cfb.progress=0 androidboot.serialno=001966b7260f8e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m'
- ATAG_NONE: 0 0
- Starting kernel at 0x40008000...
- <6>[ 0.182872] c0 audit: initializing netlink socket (disabled)
- <5>[ 0.182938] c0 type=2000 audit(0.180:1): initialized
- <4>[ 0.183510] c0 highmem bounce pool size: 64 pages
- <6>[ 0.183774] c0 ashmem: initialized
- <6>[ 0.196921] c1 fuse init (API version 7.16)
- <6>[ 0.197378] c1 msgmni has been set to 1100
- <7>[ 0.197508] c1 SELinux: Registering netfilter hooks
- <6>[ 0.197995] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198029] c1 FIPS: No test for cipher_null (cipher_null-generic)
- <6>[ 0.198129] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198163] c1 FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
- <6>[ 0.198264] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198297] c1 FIPS: No test for digest_null (digest_null-generic)
- <6>[ 0.198398] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198432] c1 FIPS: No test for compress_null (compress_null-generic)
- <6>[ 0.198532] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198607] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
- <6>[ 0.198716] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198783] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
- <6>[ 0.198890] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198960] c1 FIPS: self-tests for sha1-generic (sha1) passed
- <6>[ 0.199066] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199130] c1 FIPS: self-tests for sha224-generic (sha224) passed
- <6>[ 0.199237] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199292] c1 FIPS: self-tests for sha256-generic (sha256) passed
- <6>[ 0.199399] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199620] c1 FIPS: self-tests for sha384-generic (sha384) passed
- <6>[ 0.199729] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199940] c1 FIPS: self-tests for sha512-generic (sha512) passed
- <6>[ 0.200093] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200158] c0 FIPS: self-tests for des-generic (des) passed
- <6>[ 0.200268] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200331] c0 FIPS: self-tests for des3_ede-generic (des3_ede) passed
- <6>[ 0.200441] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200474] c0 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
- <6>[ 0.200578] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200665] c0 FIPS: self-tests for aes-generic (aes) passed
- <6>[ 0.200779] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200812] c0 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
- <6>[ 0.200913] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201419] c0 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
- <6>[ 0.201556] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201643] c0 FIPS: self-tests for crc32c-generic (crc32c) passed
- <6>[ 0.201760] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201793] c0 FIPS: No test for stdrng (krng)
- <6>[ 0.201889] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.224976] c0 FIPS: self-tests for ansi_cprng (stdrng) passed
- <6>[ 0.225153] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.225186] c0 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
- <6>[ 0.225382] c1 FIPS: self-tests for non-FIPS md5 (md5) passed
- <6>[ 0.225522] c1 FIPS: self-tests for sha1 (sha1) passed
- <6>[ 0.225946] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.226036] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.226356] c0 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
- <6>[ 0.226949] c1 FIPS: self-tests for ecb(des) (ecb(des)) passed
- <6>[ 0.227339] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227430] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227839] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227977] c1 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
- <6>[ 0.228268] c0 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
- <6>[ 0.228654] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228746] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228853] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
- <6>[ 0.229080] c1 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
- <6>[ 0.229473] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229562] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229968] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230148] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
- <6>[ 0.230415] c1 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
- <6>[ 0.230555] c1 FIPS: self-tests for non-FIPS md4 (md4) passed
- <6>[ 0.230682] c1 FIPS: self-tests for sha256 (sha256) passed
- <6>[ 0.231068] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.231158] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.231362] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
- <6>[ 0.231764] c1 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
- <6>[ 0.232160] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232251] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232655] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232873] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
- <6>[ 0.233346] c1 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
- <6>[ 0.233743] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233833] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233936] c0 FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
- <6>[ 0.234152] c1 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
- <6>[ 0.234539] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234631] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235109] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235243] c0 FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
- <6>[ 0.235526] c1 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
- <6>[ 0.235912] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236002] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236405] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236522] c0 FIPS: self-tests for ctr(aes-asm) (ctr(aes)) passed
- <6>[ 0.236771] c1 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
- <6>[ 0.237158] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237248] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237655] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.238068] c0 FIPS: self-tests for rfc3686(ctr(aes-asm)) (rfc3686(ctr(aes))) passed
- <6>[ 0.238910] c1 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
- <6>[ 0.239369] c1 FIPS: self-tests for sha384 (sha384) passed
- <6>[ 0.239800] c1 FIPS: self-tests for sha512 (sha512) passed
- <6>[ 0.240770] c1 FIPS: self-tests for non-FIPS deflate (deflate) passed
- <6>[ 0.241213] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.241306] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.241511] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
- <6>[ 0.241933] c1 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
- <6>[ 0.242116] c1 FIPS: self-tests for crc32c (crc32c) passed
- <6>[ 0.242245] c1 FIPS: self-tests for sha224 (sha224) passed
- <6>[ 0.242641] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.242734] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.243148] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.243511] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-asm)) (cts(cbc(aes))) passed
- <6>[ 0.244258] c1 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
- <6>[ 0.244664] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244756] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244903] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
- <6>[ 0.245250] c1 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
- <6>[ 0.245643] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.245733] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.245913] c0 FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
- <6>[ 0.246294] c1 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
- <6>[ 0.246680] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246771] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.247107] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
- <6>[ 0.247808] c1 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
- <6>[ 0.248202] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.248294] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.249060] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
- <6>[ 0.250638] c1 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
- <6>[ 0.251038] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.251130] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.251886] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
- <6>[ 0.253428] c1 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
- <6>[ 0.253829] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.253922] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.254108] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
- <6>[ 0.254514] c1 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
- <6>[ 0.300632] c1 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
- <6>[ 0.300669] c1 FIPS: do kernel integrity check
- <6>[ 0.545128] c1 FIPS: integrity check passed
- <6>[ 0.545367] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.545437] c1 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
- <6>[ 0.545545] c0 io scheduler noop registered
- <6>[ 0.545573] c0 io scheduler deadline registered
- <6>[ 0.545718] c0 io scheduler cfq registered
- <6>[ 0.546081] c0 io scheduler bfq registered
- <6>[ 0.546107] c0 BFQ I/O-scheduler: v7r8
- <6>[ 0.546131] c0 io scheduler row registered
- <6>[ 0.546157] c0 io scheduler sio registered (default)
- <3>[ 0.546386] c0 s3cfb s3cfb.0: div(32) max should be 16
- <6>[ 0.546419] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
- <6>[ 0.546506] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
- <6>[ 0.546776] c1 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf28f9000, size: 0x002ee000
- <6>[ 0.548743] c1 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
- <6>[ 0.551574] c1 Bootloader sent 'bootloaderfb' : 5EC00000
- <6>[ 0.552599] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 0.552737] c0 s3cfb s3cfb.0: registered successfully
- <6>[ 0.553630] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
- <6>[ 0.553671] c0 mdnie mdnie: registered successfully
- <6>[ 0.554130] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <6>[ 0.715374] c1 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
- <6>[ 0.730086] c1 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
- <6>[ 0.745085] c1 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
- <6>[ 0.748890] c1 console [ttySAC2] enabled
- <6>[ 0.790085] c1 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
- <4>[ 0.870438] c1 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
- <4>[ 0.870478] c1 Mali: mali_dvfs[0].vol = 900000
- <4>[ 0.870506] c1 Mali: init_gpu_vol = 900000
- <4>[ 0.870532] c1 Mali: mali_dvfs[1].vol = 900000
- <4>[ 0.870559] c1 Mali: mali_dvfs[2].vol = 950000
- <4>[ 0.870586] c1 Mali: mali_dvfs[3].vol = 1000000
- <4>[ 0.870679] c1 Mali: init_mali_clock mali_clock c141e1cc
- <4>[ 0.893318] c1 Initializing gpu clock control interface
- <4>[ 0.893697] c1 Initializing gpu voltage control interface
- <4>[ 0.895041] c0 Mali: Mali device driver loaded
- <4>[ 0.895405] c0 UMP: UMP device driver 0000 loaded
- <6>[ 0.903200] c0 brd: module loaded
- <6>[ 0.907240] c0 loop: module loaded
- <6>[ 0.907892] c0 sec_jack_probe : Registering jack driver
- <6>[ 0.909010] c0 wake enabled for irq 378
- <6>[ 0.909522] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
- <6>[ 0.909584] c0 max8997_muic_cfg_uart_gpio: path=0
- <6>[ 0.909787] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
- <6>[ 0.910815] c0 Loading pn544 driver
- <6>[ 0.910873] c0 pn544_probe : IRQ num 367
- <6>[ 0.911074] c0 pn544_probe : requesting IRQ 367
- <6>[ 0.912893] c0 lcd panel: ld9040_probe : lcdtype : SM2_A2
- <6>[ 0.912927] c0 lcd panel: ld9040 panel driver has been probed.
- <6>[ 0.913104] c0 PPP generic driver version 2.4.2
- <6>[ 0.913432] c0 PPP Deflate Compression module registered
- <6>[ 0.913463] c0 PPP BSD Compression module registered
- <6>[ 0.913518] c0 PPP MPPE Compression module registered
- <6>[ 0.913549] c0 NET: Registered protocol family 24
- <6>[ 0.913580] c0 tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.913609] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.913984] c0 host_notifier host_notifier.0: notifier_prove
- <6>[ 0.914603] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.914949] c0 usbcore: registered new interface driver usblp
- <6>[ 0.914982] c0 Initializing USB Mass Storage driver...
- <6>[ 0.915179] c0 usbcore: registered new interface driver usb-storage
- <6>[ 0.915213] c0 USB Mass Storage support registered.
- <6>[ 0.915295] c0 otg pdata e40417c0, irq c0e35e90
- <6>[ 0.915575] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
- <6>[ 0.915614] c0 s3c-udc : version 15 March 2009
- <7>[ 0.915641] c0 init
- <7>[ 0.916148] c0 usb: android_bind disconnect
- <7>[ 0.916175] c0 usb: usb_gadget_disconnect
- <7>[ 0.918192] c1 usb: usb_string_id cdev(0xe43b4b40)->next_string_id=1
- <6>[ 0.918371] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.918412] c0 android_usb gadget: Number of LUNs=2
- <6>[ 0.918443] c0 lun0: LUN: removable file: (no medium)
- <6>[ 0.918474] c0 lun1: LUN: removable file: (no medium)
- <7>[ 0.919304] c0 usb: usb_string_id cdev(0xe43b4b40)->next_string_id=2
- <7>[ 0.919341] c0 usb: usb_string_id cdev(0xe43b4b40)->next_string_id=3
- <7>[ 0.919382] c0 usb: usb_string_id cdev(0xe43b4b40)->next_string_id=4
- <7>[ 0.919417] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
- <7>[ 0.919449] c0 usb: composite_bind bcdDevice=0x0
- <7>[ 0.919476] c0 usb: composite_bind composite_manufacturer=
- <6>[ 0.919511] c0 android_usb gadget: android_usb ready
- <6>[ 0.919539] c0 usb: Skip udc_enable
- <6>[ 0.920806] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
- <7>[ 0.921053] c0 [keys]PWR 0
- <6>[ 0.921537] c0 input: sec_touchscreen as /devices/virtual/input/input2
- <6>[ 1.040515] c0 Atmel MXT224 3-004a: family = 0x80, variant = 0x1, version= 0x16, build = 171
- <3>[ 1.040563] c0 [TSP] family = 0x80, variant = 0x1, version = 0x16, build = 171
- <3>[ 1.054742] c0 [TSP] TSP chip is MXT224
- <3>[ 1.125047] c0 [TSP] ta_status is 0
- <3>[ 1.126892] c0 [TSP] mxt224_ta_probe
- <3>[ 1.133085] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
- <3>[ 1.137167] c0 [TSP] calibration success!!!
- <3>[ 1.141263] c0 [TSP] Calibration End!!!!!!
- <3>[ 1.144996] c0 [TSP] Calibration!!!!!!
- <3>[ 1.148240] c0 [TSP] +mxt224_optical_gain()
- <3>[ 1.370462] c0 [TSP] -mxt224_optical_gain()
- <6>[ 1.400056] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
- <6>[ 1.425054] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
- <6>[ 1.450198] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
- <6>[ 1.451767] c0 using rtc device, max8997-rtc, for alarms
- <6>[ 1.451822] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
- <4>[ 1.452161] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- <6>[ 1.452547] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
- <6>[ 1.452740] c0 i2c /dev entries driver
- <6>[ 1.455459] c0 lirc_dev: IR Remote Control driver registered, major 250
- <6>[ 1.455497] c0 IR NEC protocol handler initialized
- <6>[ 1.455524] c0 IR RC5(x) protocol handler initialized
- <6>[ 1.455552] c0 IR RC6 protocol handler initialized
- <6>[ 1.455579] c0 IR JVC protocol handler initialized
- <6>[ 1.455605] c0 IR Sony protocol handler initialized
- <6>[ 1.455633] c0 IR RC5 (streamzap) protocol handler initialized
- <6>[ 1.455664] c0 IR LIRC bridge handler initialized
- <6>[ 1.455690] c0 Linux video capture interface: v2.00
- <7>[ 1.455976] c0 [S5K5BAFX] s5k5bafx_create_sysfs
- <6>[ 1.456439] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
- <6>[ 1.456510] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
- <4>[ 1.456683] c0 Initialize JPEG driver
- <4>[ 1.457138] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
- <6>[ 1.457392] c0 s5p_int_src_ext_hpd()
- <6>[ 1.457420] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.457615] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.458026] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
- <4>[ 1.458173] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
- <4>[ 1.458210] c0 i2c-core: driver [s5p_ddc] using legacy resume method
- <6>[ 1.458747] c1 MFC(Multi Function Codec - FIMV v5.x) registered successfully
- <6>[ 1.459572] c1 sii9234_cfg_gpio()
- <6>[ 1.459605] c1 Registered chained gpio int handler for interrupt 111.
- <6>[ 1.459654] c1 Registered interrupt support for gpio group 10.
- <6>[ 1.459690] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.459900] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.460057] c1 sii9234 : create mhl sysfile
- <6>[ 1.460621] c1 input: sii9234_rcp as /devices/virtual/input/input3
- <6>[ 1.461522] c1 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
- <6>[ 1.463227] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
- <6>[ 1.463339] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 1.463692] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
- <6>[ 1.463879] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 1.464698] c0 max17042 9-0036: max17042_probe : is enable (1)
- <6>[ 1.464733] c0 max17042 9-0036: max17042_init_regs
- <6>[ 1.465998] c0 max17042 9-0036: fuel alert soc (2)
- <6>[ 1.466028] c0 max17042 9-0036: max17042_alert_init
- <6>[ 1.467639] c1 wake enabled for irq 371
- <6>[ 1.468756] c1 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
- <6>[ 1.469400] c1 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
- <6>[ 1.469452] c1 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
- <6>[ 1.472056] c1 max17042 9-0036: max17042_get_soc : soc(3fb7)
- <6>[ 1.472090] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 1.472119] c1 max17042 9-0036: max17042_get_soc : use raw (63), soc (65)
- <4>[ 1.472772] c1 i2c-core: driver [max17042] using legacy suspend method
- <4>[ 1.472808] c1 i2c-core: driver [max17042] using legacy resume method
- <6>[ 1.473692] c1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 1.473780] c1 Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.473811] c1 Bluetooth: HCI H4 protocol initialized
- <6>[ 1.474327] c1 cpuidle: using governor ladder
- <6>[ 1.475118] c1 cpuidle: using governor menu
- <6>[ 1.475270] c1 mshci: Mobile Storage Host Controller Interface driver
- <6>[ 1.475307] c1 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
- <6>[ 1.475475] c1 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
- <3>[ 1.475750] c1 mmc0: Version ID 0x5342230a.
- <6>[ 1.478692] c1 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
- <6>[ 1.479144] c1 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
- <6>[ 1.479416] c1 sdhci: Secure Digital Host Controller Interface driver
- <6>[ 1.479453] c1 sdhci: Copyright(c) Pierre Ossman
- <6>[ 1.479570] c1 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
- <6>[ 1.479825] c1 mmc1: vtf_2.8v regulator found
- <3>[ 1.505378] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.509043] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.517072] c0 mmc0: cmd 8 response timeout error
- <3>[ 1.520677] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.525319] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.530006] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.534710] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.539426] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.544197] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.548970] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.553731] c0 mmc0: cmd 55 response timeout error
- <6>[ 1.576793] c1 mmc0: VYL00M: 15010056594c30304d1966b7260f8e0d
- <6>[ 1.630318] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- <6>[ 1.630528] c0 wake enabled for irq 380
- <6>[ 1.630553] c0 mmc1: card inserted.
- <6>[ 1.630656] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
- <3>[ 1.630734] c0 mmc2: no vmmc regulator found
- <6>[ 1.633798] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
- <6>[ 1.644396] c1 usbcore: registered new interface driver usbhid
- <6>[ 1.644431] c1 usbhid: USB HID core driver
- <6>[ 1.645009] c1 logger: created 2048K log 'log_main'
- <6>[ 1.645270] c1 logger: created 256K log 'log_events'
- <6>[ 1.645500] c1 logger: created 1024K log 'log_radio'
- <6>[ 1.645728] c1 logger: created 256K log 'log_system'
- <6>[ 1.645956] c1 logger: created 256K log 'log_sf'
- <6>[ 1.645991] c1 sec_getlog_supply_loggerinfo: 0xc1667350 0xc1567350 0xc1527350 0xc14e7350
- <6>[ 1.646279] c0 mmc0 : 00 : 25 : 20110416 : 0.
- <6>[ 1.646687] c1 zram: num_devices not specified. Using default: 1
- <6>[ 1.646721] c1 zram: Creating 1 devices ...
- <6>[ 1.647431] c1 k3dh_probe: is started.
- <4>[ 1.647781] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.647818] c0 mmc0: power class selection to bus width 8 failed
- <3>[ 1.652469] c0 using defualt position
- <4>[ 1.656406] c1 mmc0: Voltage range not supported for power class.
- <3>[ 1.656442] c1 mmc0: power class selection to bus width 8 ddr 2 failed
- <6>[ 1.662748] c0 k3dh_probe: is successful.
- <6>[ 1.663100] c0 mmc0: new high speed DDR MMC card at address 0001
- <6>[ 1.663486] c1 input: gyro_sensor as /devices/virtual/input/input4
- <6>[ 1.663612] c0 mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- <6>[ 1.664771] c0 akm8975_probe is called.
- <6>[ 1.666480] c0 akm8975_probe: asa_x = 170, asa_y = 168, asa_z = 178
- <6>[ 1.667012] c0 Registered sensors device: magnetic_sensor
- <6>[ 1.667054] c0 akm8975_probe is successful.
- <6>[ 1.670743] c1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
- <6>[ 1.700394] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.700754] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.704614] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.704956] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.705299] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.705645] c0 mmc1: cmd 5 command timeout error
- <3>[ 1.725318] c0 cm3663_setup_reg: initial proximity value = 1
- <6>[ 1.731811] c1 input: proximity_sensor as /devices/virtual/input/input5
- <6>[ 1.732500] c0 input: light_sensor as /devices/virtual/input/input6
- <6>[ 1.735488] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
- <6>[ 1.735610] c0 audss_init: RCLK SRC[busclk]
- <6>[ 1.735707] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <7>[ 1.735930] c0 pmu_debug: 0x00000900
- <6>[ 1.739496] c1 mmc1: new high speed SD card at address 0001
- <6>[ 1.739965] c1 mmcblk1: mmc1:0001 00000 1.89 GiB
- <6>[ 1.741134] c1 mmcblk1: p1
- <6>[ 1.746540] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.746582] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
- <7>[ 1.746618] c0 i2s_txctrl: Turn Off - spr is no active
- <6>[ 1.746663] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.746697] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.809031] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
- <6>[ 1.810199] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
- <6>[ 1.818109] c0 SRP: Driver successfully probed
- <6>[ 1.818338] c0 ALSA device list:
- <6>[ 1.818360] c0 #0: U1-YMU823
- <6>[ 1.818499] c0 GACT probability NOT on
- <6>[ 1.818528] c0 Mirror/redirect action on
- <6>[ 1.818554] c0 u32 classifier
- <6>[ 1.818571] c0 Actions configured
- <6>[ 1.818595] c0 Netfilter messages via NETLINK v0.30.
- <6>[ 1.818676] c0 nf_conntrack version 0.5.0 (12391 buckets, 49564 max)
- <6>[ 1.819572] c0 ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.819634] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.819671] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.820475] c0 xt_time: kernel timezone is -0000
- <6>[ 1.822002] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.822158] c0 arp_tables: (C) 2002 David S. Miller
- <6>[ 1.822225] c0 TCP cubic registered
- <6>[ 1.822248] c0 TCP westwood registered
- <6>[ 1.823488] c0 NET: Registered protocol family 10
- <6>[ 1.826076] c0 Mobile IPv6
- <6>[ 1.826123] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.826353] c0 IPv6 over IPv4 tunneling driver
- <6>[ 1.831205] c0 NET: Registered protocol family 17
- <6>[ 1.831257] c0 NET: Registered protocol family 15
- <6>[ 1.831424] c1 Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.831466] c1 Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.831497] c1 Bluetooth: RFCOMM ver 1.11
- <6>[ 1.831521] c1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.831553] c1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.831819] c1 NET: Registered protocol family 35
- <5>[ 1.832379] c1 Registering the dns_resolver key type
- <6>[ 1.832430] c1 EXYNOS4210: Adaptive Support Voltage init
- <6>[ 1.832686] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
- <6>[ 1.833237] c0 EXYNOS4: HPM value = 20
- <6>[ 1.833293] c0 EXYNOS4: IDS value = 30
- <6>[ 1.833316] c0 <6>Support 1.2GHz
- <6>[ 1.833336] c0 <6>ASV Group for This Exynos4210 is 0x40000004
- <6>[ 1.833377] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
- <5>[ 1.833438] c0 Registering SWP/SWPB emulation handler
- <6>[ 1.833513] c0 DVFS : VDD_ARM Voltage table set with 4 Group
- <6>[ 1.833545] c0 max8997_set_arm_voltage_table
- <6>[ 1.833576] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[0]=1300000, buck1_vol[1]=26
- <6>[ 1.833780] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1250000, buck1_vol[2]=24
- <6>[ 1.833972] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1150000, buck1_vol[3]=20
- <6>[ 1.834167] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1050000, buck1_vol[4]=16
- <6>[ 1.834358] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[5]=13
- <6>[ 1.834549] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[6]=12
- <6>[ 1.834742] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
- <4>[ 1.835274] c1 ------------[ cut here ]------------
- <4>[ 1.835319] c1 WARNING: at ../../../../../../kernel/samsung/smdk4412-GeniSys/fs/sysfs/dir.c:455 sysfs_add_one+0xa4/0xc4()
- <4>[ 1.835375] c1 sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'
- <4>[ 1.835429] c1 Modules linked in:
- <4>[ 1.835451] c1 Backtrace:
- <4>[ 1.835490] c1 [<c0b5a79c>] (dump_backtrace+0x0/0x10c) from [<c10e5454>] (dump_stack+0x18/0x1c)
- <4>[ 1.835535] c1 r7:000001c7 r6:c12200c0 r5:00000009 r4:e4043ed0
- <4>[ 1.835587] c1 [<c10e543c>] (dump_stack+0x0/0x1c) from [<c0b95978>] (warn_slowpath_common+0x5c/0x6c)
- <4>[ 1.835639] c1 [<c0b9591c>] (warn_slowpath_common+0x0/0x6c) from [<c0b959c0>] (warn_slowpath_fmt+0x38/0x40)
- <4>[ 1.835688] c1 r9:00000000 r8:00000000 r7:e4043f18 r6:e45c2f90 r5:e4099000
- <4>[ 1.835734] c1 r4:c1220104
- <4>[ 1.835761] c1 [<c0b95988>] (warn_slowpath_fmt+0x0/0x40) from [<c0c7d568>] (sysfs_add_one+0xa4/0xc4)
- <4>[ 1.835807] c1 r3:e4099000 r2:c1220104
- <4>[ 1.835834] c1 r4:ffffffef
- <4>[ 1.835861] c1 [<c0c7d4c4>] (sysfs_add_one+0x0/0xc4) from [<c0c7c694>] (sysfs_add_file_mode+0x4c/0xac)
- <4>[ 1.835908] c1 r7:00000013 r6:e28f2570 r5:c14649f0 r4:e45c2f90
- <4>[ 1.835956] c1 [<c0c7c648>] (sysfs_add_file_mode+0x0/0xac) from [<c0c7c724>] (sysfs_create_file+0x30/0x44)
- <4>[ 1.836004] c1 r6:c0b99c74 r5:e28f6714 r4:c144dcf4
- <4>[ 1.836048] c1 [<c0c7c6f4>] (sysfs_create_file+0x0/0x44) from [<c0de52bc>] (create_standard_UV_interfaces+0x54/0x58)
- <4>[ 1.836114] c1 [<c0de5268>] (create_standard_UV_interfaces+0x0/0x58) from [<c0ec9c68>] (cpufreq_register_driver+0x150/0x184)
- <4>[ 1.836170] c1 r5:00000000 r4:c14e6328
- <4>[ 1.836208] c1 [<c0ec9b18>] (cpufreq_register_driver+0x0/0x184) from [<c000f954>] (exynos_cpufreq_init+0x150/0x1b0)
- <4>[ 1.836260] c1 r7:00000013 r6:c0b99c74 r5:c14bcc50 r4:c14bcc50
- <4>[ 1.836314] c1 [<c000f804>] (exynos_cpufreq_init+0x0/0x1b0) from [<c0b5092c>] (do_one_initcall+0x12c/0x184)
- <4>[ 1.836363] c1 r5:e4042020 r4:c14bc6a0
- <4>[ 1.836397] c1 [<c0b50800>] (do_one_initcall+0x0/0x184) from [<c0008ad8>] (kernel_init+0xcc/0x154)
- <4>[ 1.836450] c1 [<c0008a0c>] (kernel_init+0x0/0x154) from [<c0b99c74>] (do_exit+0x0/0x720)
- <4>[ 1.836504] c1 ---[ end trace 3bc603587bbf7f83 ]---
- <6>[ 1.836539] c1 DVFS : VDD_INT Voltage table set with 4 Group
- <6>[ 1.836921] c1 exynos4_pm_hotplug_device_init: 0
- <6>[ 1.836950] c1 EXYNOS4 PM-hotplug init function
- <7>[ 1.837536] c1 mif: set_hsic_lpa_states: 281: called(s5p_usb_phy_init+0x150/0x5b0):
- <6>[ 1.837581] c1 s5p-ehci s5p-ehci: usb phy usage(2)
- <6>[ 1.837725] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <6>[ 1.838037] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <6>[ 1.838194] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <6>[ 1.845056] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- <6>[ 1.845150] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.845191] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.845232] c1 usb usb1: Product: S5P EHCI Host Controller
- <6>[ 1.845263] c1 usb usb1: Manufacturer: Linux 3.0.101r6-GeniSys.Kernel+ ehci_hcd
- <6>[ 1.845303] c1 usb usb1: SerialNumber: s5p-ehci
- <6>[ 1.845881] c1 hub 1-0:1.0: USB hub found
- <6>[ 1.845926] c1 hub 1-0:1.0: 3 ports detected
- <6>[ 1.846281] c1 CP not ready, Active State low
- <6>[ 1.846420] c1 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
- <6>[ 1.846461] c1 @@@ get_refresh_interval = 0x2e
- <6>[ 1.846487] c1 @@@ get_refresh_interval = 0x5d
- <6>[ 1.846521] c1 ** temperature set value **
- <6>[ 1.846542] c1 1st throttling stop_temp = 61, start_temp = 64
- <6>[ 1.846572] c1 2nd throttling stop_temp = 87, start_tmep = 103
- <6>[ 1.846602] c1 tripping temp = 110, s/w emergency temp = 120
- <6>[ 1.846634] c1 mem throttling stop_temp = 80, start_temp = 85
- <6>[ 1.846787] c0 exynos4210_tmu_init: triminfo = 0x0000004d, low 8bit = 0x4d, high 24 bit = 0x000000
- <6>[ 1.846843] c0 THD_TEMP:0x71: TRIG_LEV0: 0x03
- <6>[ 1.846865] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
- <6>[ 1.897253] c0 [MODEM_IF] init_modem
- <3>[ 1.897290] c0 check phone active = 94
- <6>[ 1.899583] c0 umts_modem_cfg_gpio done
- <6>[ 1.899617] c0 modem_link_pm_config_gpio done
- <3>[ 1.899850] c0 mif: modem_probe: modem_if
- <6>[ 1.904538] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
- <6>[ 1.904729] c0 wake enabled for irq 366
- <6>[ 1.904754] c0 mif: create_modemctl_device: xmm6260 is created!!!
- <6>[ 1.905265] c1 wake enabled for irq 361
- <6>[ 1.905535] c0 usbcore: registered new interface driver cdc_modem
- <6>[ 1.905581] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe4127800)
- <6>[ 1.905620] c0 mif: hsic_create_link_device: usb : create_link_device DONE
- <3>[ 1.905658] c0 mif: modem_probe: link created: usb
- <6>[ 1.909376] c0 mif: create_io_device: Bood device = umts_boot0
- <6>[ 1.918727] c0 mif: modem_probe: Complete!!!
- <4>[ 1.920733] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
- <6>[ 1.922272] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
- <6>[ 1.922455] c0 otg host_probe start c0e238cc
- <6>[ 2.125071] c1 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <7>[ 2.125145] c1 [TouchKey] i2c_touchkey_probe
- <6>[ 2.125484] c1 input: sec_touchkey as /devices/virtual/input/input7
- <7>[ 2.180592] c0 [TouchKey] Module Version: 12
- <6>[ 2.180622] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <6>[ 2.182715] c0 max8997-rtc max8997-rtc: setting system clock to 2015-11-09 08:46:58 UTC (1447058818)
- <6>[ 2.182856] c0 ctrl->mem.size = 0x500000
- <6>[ 2.182879] c0 ctrl->mem.base = 0x70f3c000
- <6>[ 2.182996] c0
- <6>[ 2.183007] c0
- <6>[ 2.183018] c0
- <6>[ 2.183028] c0 cam_cfg_gpio: pdev->id=0
- <6>[ 2.183347] c0 FIMC0 registered successfully
- <6>[ 2.183467] c1 ctrl->mem.size = 0x0
- <6>[ 2.183489] c1 ctrl->mem.base = 0xffffffea
- <6>[ 2.183800] c1 FIMC1 registered successfully
- <6>[ 2.183918] c0 ctrl->mem.size = 0x1900000
- <6>[ 2.183943] c0 ctrl->mem.base = 0x6f63c000
- <6>[ 2.184231] c0 FIMC2 registered successfully
- <6>[ 2.184348] c1 ctrl->mem.size = 0x700000
- <6>[ 2.184372] c1 ctrl->mem.base = 0x6ef3c000
- <6>[ 2.184657] c1 FIMC3 registered successfully
- <6>[ 2.184901] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
- <6>[ 2.207988] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- <6>[ 2.208031] c0 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
- <6>[ 2.208459] c0 sec_bat_get_lpcharging_state: LP charging:0
- <4>[ 2.209182] c0 Initializing charge current control interface
- <6>[ 2.209569] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
- <6>[ 2.209891] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 2.210073] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 2.210467] c1 sec-battery sec-battery: sec_bat_check_temper: temp=360, adc=743
- <6>[ 2.210516] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 2.210578] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 2.210625] c1 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3933), temp(36), charging(1), health(1), chg_adc(0)
- <4>[ 2.211732] c0 Warning: unable to open an initial console.
- <6>[ 2.213679] c0 Freeing init memory: 11552K
- <7>[ 2.348896] c1 SELinux: 2048 avtab hash slots, 4742 rules.
- <7>[ 2.351190] c1 SELinux: 2048 avtab hash slots, 4742 rules.
- <7>[ 2.351235] c1 SELinux: 1 users, 2 roles, 386 types, 0 bools, 1 sens, 1024 cats
- <7>[ 2.351279] c1 SELinux: 86 classes, 4742 rules
- <7>[ 2.352669] c1 SELinux: Completing initialization.
- <7>[ 2.352697] c1 SELinux: Setting up existing superblocks.
- <7>[ 2.352746] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[ 2.352801] c1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 2.353349] c1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 2.353403] c1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 2.353463] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.353523] c1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 2.354017] c1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 2.354065] c1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 2.354109] c1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 2.354165] c1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 2.354221] c1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 2.354340] c1 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
- <7>[ 2.354386] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.354451] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <5>[ 2.410934] c1 type=1403 audit(1447058818.725:2): policy loaded auid=4294967295 ses=4294967295
- <5>[ 2.418067] c1 type=1404 audit(1447058818.730:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- <6>[ 2.622499] c1 sec_bat_get_lpcharging_state: LP charging:0
- <3>[ 2.625099] c1 init: could not import file '/init.recovery.smdk4x12.rc' from '/init.rc'
- <3>[ 2.637364] c1 healthd: wakealarm_init: timerfd_create failed
- <4>[ 2.644581] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <4>[ 2.708025] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <4>[ 2.723094] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <4>[ 2.785225] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <4>[ 2.786847] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <4>[ 2.788339] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <6>[ 2.789170] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <4>[ 2.790695] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <6>[ 2.895068] c1 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 2.895256] c1 exynos4_handler_tmu_state: inform to init state to platform.
- <3>[ 3.017868] c0 init: /dev/hw_random not found
- <7>[ 3.031209] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 3.031542] c0 init: /dev/hw_random not found
- <7>[ 3.037269] c0 usb: enable_store enabled=0, !dev->enabled=1
- <7>[ 3.037300] c0 usb: usb_gadget_disconnect
- <7>[ 3.037561] c0 usb: functions_store buff=mtp,adb
- <7>[ 3.037591] c0 usb: android_enable_function name=mtp
- <7>[ 3.037619] c0 usb: android_enable_function name=adb
- <3>[ 3.037988] c0 init: Unable to open persistent property directory /data/property errno: 2
- <3>[ 3.049643] c0 init: Warning! Service recovery needs a SELinux domain defined; please fix!
- <7>[ 3.057834] c0 usb: enable_store enabled=0, !dev->enabled=1
- <7>[ 3.057873] c0 usb: usb_gadget_disconnect
- <5>[ 3.058604] c1 type=1400 audit(1447058819.370:4): avc: denied { write } for pid=1867 comm="toolbox" name="enforce" dev=selinuxfs ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file
- <5>[ 3.058787] c1 type=1400 audit(1447058819.370:5): avc: denied { setenforce } for pid=1867 comm="toolbox" scontext=u:r:recovery:s0 tcontext=u:object_r:kernel:s0 tclass=security
- <5>[ 3.058898] c1 type=1404 audit(1447058819.370:6): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
- <7>[ 3.059093] c0 usb: enable_store enabled=1, !dev->enabled=1
- <7>[ 3.059128] c0 usb: enable_store vendor=18d1,product=4ee2,bcdDevice=226
- <7>[ 3.059164] c0 ,Class=0,SubClass=0,Protocol=0
- <7>[ 3.059189] c0 usb: enable_store next cmd : usb_add_config
- <6>[ 3.059608] c1 failed to copy MFC F/W during init
- <5>[ 3.060596] c1 type=1400 audit(1447058819.375:7): avc: denied { execmem } for pid=1868 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process
- <6>[ 3.064555] c0 adb_open
- <7>[ 3.064585] c0 usb: android_bind_enabled_functions f:mtp
- <6>[ 3.064623] c0 mtp_bind_config
- <7>[ 3.064647] c0 usb: usb_string_id cdev(0xe43b4b40)->next_string_id=1
- <7>[ 3.064713] c0 usb: android_bind_enabled_functions f:adb
- <6>[ 3.064742] c0 adb_bind_config
- <7>[ 3.064782] c0 usb: usb_gadget_connect
- <5>[ 3.082757] c1 type=1400 audit(1447058819.395:8): avc: denied { execute } for pid=1868 comm="recovery" path="/dev/__properties__" dev=tmpfs ino=1576 scontext=u:r:init:s0 tcontext=u:object_r:properties_device:s0 tclass=file
- <6>[ 3.089316] c1 lcd panel: id=2 brightness=255, bl=20, candela=300
- <5>[ 3.093706] c1 type=1400 audit(1447058819.405:9): avc: denied { execute } for pid=1868 comm="recovery" path="/dev/graphics/fb0" dev=tmpfs ino=272 scontext=u:r:init:s0 tcontext=u:object_r:graphics_device:s0 tclass=chr_file
- <5>[ 3.172330] c1 type=1400 audit(1447058819.485:10): avc: denied { execute } for pid=1868 comm="recovery" path="/dev/ashmem" dev=tmpfs ino=418 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file
- <3>[ 3.179705] c1 [TSP] sec_touchscreen_enable
- <3>[ 3.180306] c0 [TSP] Calibration End!!!!!!
- <6>[ 3.205674] c1 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 3.206215] c1 sec-battery sec-battery: sec_bat_check_temper: temp=360, adc=743
- <6>[ 3.206266] c1 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 3.206333] c1 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 3.206380] c1 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3933), temp(36), charging(1), health(1), chg_adc(0)
- <4>[ 3.207921] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=
- <6>[ 3.224468] c1 EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.224537] c1 SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
- <6>[ 3.263256] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.263316] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <7>[ 3.311384] c1 SELinux: initialized (dev mmcblk0p11, type vfat), uses genfs_contexts
- <6>[ 3.387088] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.387149] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 3.530690] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.530751] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <7>[ 3.579228] c1 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 3.905507] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
- <6>[ 3.908164] c0 normal: free cpufreq_limit & interrupt enable.
- <6>[ 3.920233] c0 max8997-muic max8997-muic: max8997_muic_init_detect
- <6>[ 3.920665] c0 max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x41
- <6>[ 3.920795] c0 max8997-muic max8997-muic: detect_dev: ATTACHED
- <6>[ 3.920919] c0 max8997-muic max8997-muic: attach_usb
- <6>[ 3.921018] c0 max8997-muic max8997-muic: attach_charger: chg_type(0x1)
- <3>[ 3.921161] c0 [TSP] mxt224_ta_probe
- <3>[ 3.925405] c0 [TSP]TA_probe MXT224 T9 Byte7 is 70
- <6>[ 3.929226] c0 sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
- <6>[ 3.929440] c0 max8997-charger max8997-charger: max8997_disable_charging: disable charging
- <6>[ 3.930021] c0 max8922-charger max8922-charger: max8922_enable_charging: enable charging,USB
- <6>[ 3.930763] c0 max8997-muic max8997-muic: switch_to_ap_usb
- <6>[ 3.930880] c0 max8997-muic max8997-muic: set_accdet(en) cntl2(0x20)
- <6>[ 4.235203] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 4.235777] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 4.236614] c0 sec-battery sec-battery: sec_bat_check_temper: temp=360, adc=742
- <6>[ 4.236749] c0 sec-battery sec-battery: Time past : 0 secs
- <6>[ 4.236841] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 4.236964] c0 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3933), temp(36), charging(1), health(1), chg_adc(0)
- <4>[ 4.240867] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=u
- <4>[ 4.242080] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=u
- <4>[ 4.244124] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=u
- <7>[ 4.686663] c1 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 4.728393] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 4.728444] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 5.205480] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 5.206090] c0 sec-battery sec-battery: sec_bat_check_temper: temp=360, adc=744
- <6>[ 5.206180] c0 sec-battery sec-battery: Time past : 1 secs
- <6>[ 5.206250] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 5.206341] c0 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3933), temp(36), charging(1), health(1), chg_adc(0)
- <4>[ 5.208389] c1 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=u
- <6>[ 5.506017] c0 mtp_open
- <6>[ 6.205988] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 6.206935] c0 sec-battery sec-battery: sec_bat_check_temper: temp=360, adc=742
- <6>[ 6.207110] c0 sec-battery sec-battery: Time past : 2 secs
- <6>[ 6.207234] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 6.207391] c0 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3933), temp(36), charging(1), health(1), chg_adc(0)
- <4>[ 6.213221] c0 healthd: battery l=65 v=3933 t=36.0 h=2 st=2 c=0 chg=u
- <6>[ 11.523892] c1 max17042 9-0036: max17042_get_soc : soc(3fb7)
- <6>[ 11.524005] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 11.524102] c1 max17042 9-0036: max17042_get_soc : use raw (63), soc (65)
- <6>[ 12.255687] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 12.625820] c1 [VIB] vibrator_work: pwm_config duty=28230
- <3>[ 14.955269] c0 [HOTPLUG OUT] check_down 200000<=200000 && 0<100
- <3>[ 14.959827] c0 CPU_DOWN 1
- <4>[ 14.963933] c1 migrate_irqs: 33 callbacks suppressed
- <4>[ 14.964031] c1 IRQ112 no longer affine to CPU1
- <5>[ 14.964844] c0 CPU1: shutdown
- <7>[ 15.920316] c0 usb: usb_ready udc_enable=0
- <6>[ 17.775499] c0 [VIB] vibrator_work: pwm_config duty=28230
- <6>[ 17.920083] c0 max8997-muic max8997-muic: max8997_muic_usb_detect
- <6>[ 17.920181] c0 max8997-muic max8997-muic: max8997_muic_usb_detect: usb attach
- <6>[ 17.920261] c0 otg max8997_muic_usb_cb: usb mode=1
- <6>[ 17.920319] c0 otg change mode : USB Cable Detached --> USB Cable Attached (0 --> 1) disabled
- <7>[ 17.920415] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1
- <7>[ 17.920480] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1
- <7>[ 17.920701] c0 usb: s5p_usb_phy0_tune read original tune
- <7>[ 17.920761] c0 usb: s5p_usb_phy0_tune save default phytune (0x819b3)
- <7>[ 17.920830] c0 usb: s5p_usb_phy0_tune original tune=0x819b3
- <7>[ 17.920892] c0 usb: s5p_usb_phy0_tune tune_mask=0x10380f, tune=0x10280b
- <7>[ 17.920974] c0 usb: s5p_usb_phy0_tune custom tune=0x1829bb
- <7>[ 17.921036] c0 usb: s5p_usb_phy0_tune modified tune=0x1829bb
- <6>[ 17.974705] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 17.974839] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <7>[ 18.055936] c0 usb: GET_DES
- <7>[ 18.056013] c0 usb: android_work config= (null),connected=1,sw_connected=0
- <7>[ 18.056630] c0 usb: android_work sent uevent USB_STATE=CONNECTED
- <7>[ 18.083933] c0 usb: GET_DES
- <7>[ 18.090552] c0 usb: GET_DES
- <6>[ 18.094097] c0 android_usb gadget: high speed config #1: android
- <7>[ 18.094152] c0 usb: SET_CON
- <7>[ 18.094234] c0 usb: android_work config=c1452fbc,connected=1,sw_connected=1
- <7>[ 18.094543] c0 usb: android_work sent uevent USB_STATE=CONFIGURED
- <6>[ 18.128784] c0 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts:
- <7>[ 18.128912] c0 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
- <6>[ 18.268636] c0 SysRq : Emergency Remount R/O
- <6>[ 18.287398] c0 EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
- <4>[ 18.291625] c0 Emergency Remount complete
- <0>[ 18.373426] c0 (sec_debug_set_upload_magic) 0
- <6>[ 18.377217] c0 REBOOT Notifier for CPUFREQ
- <6>[ 18.377978] c0 REBOOT Notifier for BUSFREQ
- <3>[ 18.378000] c0 hotplug_reboot_notifier_call: disabling pm hotplug
- <6>[ 18.382773] c0 mif: xmm6260_off: xmm6260_off()
- <6>[ 18.383138] c0 mc1n2_i2c_shutdown
- <7>[ 18.383793] c0 pmu_debug: 0x00000901
- <6>[ 18.393820] c0 mc1n2_i2c_shutdown done
- <6>[ 18.393846] c0 max8997-muic max8997-muic: max8997_muic_shutdown: JIGSet: auto detection
- <6>[ 18.394179] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: disable WTSR
- <6>[ 18.415268] c0 max8997_rtc_shutdown: WTSR_SMPL reg(0x80)
- <6>[ 18.415298] c0 max8997_rtc_shutdown: success to disable WTSR
- <6>[ 18.415382] c0 k3dh_shutdown: is called.
- <6>[ 18.415580] c0 pn544_shutdown
- <6>[ 18.416631] c0 sdhci_shutdown_host : MMC Card OFF
- <4>[ 18.416758] c0 Disabling non-boot CPUs ...
- <0>[ 18.416788] c0 Restarting system with command ''.
- <0>[ 18.420054] c0 pid = 1 name:init
- <0>[ 18.423285] c0 sec_reboot (104, )
- Ibl: pbl_read_emmc441() read 8k
- Ibl: pbl_read_emmc441() read 96k
- Ibl: pbl_read_emmc441() read download info
- Ibl: pbl_read_emmc441() endop
- Ibl: jump() verify_binary_integrity...ok
- Ibl: jump() jump!!!
- Welcome to Samsung Primitive Bootloader.
- build time: Sep 19 2012 18:31:37
- current time: 0/1/7 0:17:59
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- <display_card_info:1009> ext_csd
- <display_card_info:1011>card_size: 15028
- Total Card Size: 15029 MByte
- mmc_init: card initialization completed!
- pbl found bootable sbl in #49152.
- jump to sbl 0x4d400000.
- Secondary Bootloader v3.1 version.
- Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
- Board: C1 REV 02 / Sep 19 2012 18:31:42
- current time: 0/1/7 0:18:0
- booting code=0x0
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- CID:150100 56594c30 304d1966 b7260f8e
- <display_card_info:1046> ext_csd
- <display_card_info:1048>card_size: 15028
- Total Card Size: 15029 MByte
- Total Sector Count: 30777344
- MoviNand Initialization Complete!
- ===== PARTITION INFORMATION =====
- ID : GANG (0x0)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : BOOT (0x1)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : EFS (0x4)
- DEVICE : MMC
- FIRST UNIT : 8192
- NO. UNITS : 40960
- =================================
- ID : SBL1 (0x2)
- DEVICE : MMC
- FIRST UNIT : 49152
- NO. UNITS : 2560
- =================================
- ID : SBL2 (0x3)
- DEVICE : MMC
- FIRST UNIT : 53248
- NO. UNITS : 2560
- =================================
- ID : PARAM (0x5)
- DEVICE : MMC
- FIRST UNIT : 57344
- NO. UNITS : 16384
- =================================
- ID : KERNEL (0x6)
- DEVICE : MMC
- FIRST UNIT : 73728
- NO. UNITS : 16384
- =================================
- ID : RECOVERY (0x7)
- DEVICE : MMC
- FIRST UNIT : 90112
- NO. UNITS : 16384
- =================================
- ID : CACHE (0x8)
- DEVICE : MMC
- FIRST UNIT : 106496
- NO. UNITS : 204800
- =================================
- ID : MODEM (0x9)
- DEVICE : MMC
- FIRST UNIT : 311296
- NO. UNITS : 32768
- =================================
- ID : FACTORYFS (0xa)
- DEVICE : MMC
- FIRST UNIT : 344064
- NO. UNITS : 2097152
- =================================
- ID : DATAFS (0xb)
- DEVICE : MMC
- FIRST UNIT : 2441216
- NO. UNITS : 12582912
- =================================
- ID : UMS (0xc)
- DEVICE : MMC
- FIRST UNIT : 15024128
- NO. UNITS : 14696448
- =================================
- ID : HIDDEN (0xd)
- DEVICE : MMC
- FIRST UNIT : 29720576
- NO. UNITS : 1048576
- =================================
- loke_init: j4fs_open..success
- <start_checksum:1033>CHECKSUM_HEADER_SECTOR :42
- <start_checksum:1035>offset:42, size:1024
- Not Need Movinand Checksum
- load_lfs_parameters valid magic code and version.
- switch_sel_str='1'
- load_debug_level: read debug level successfully(0x574f4c44)...LOW
- init_ddi_data: usable ddi data.
- init_fuel_gauge : not por status
- fuel_gauge_get_version: [1]=0, [0]=92
- init_fuel_gauge: vcell = 3976 mV, vfocv = 3890 mV, soc = 63
- init_fuel_gauge : check s/w reset (20000000) : use wide tolerance
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- 7004 = (396100 - 350354)*15312/100000
- [2] 393874 = (7004 * 100000) / 16565 + 351593
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL2:0x3a
- init_microusb_ic: MUIC: CONTROL2:0x3a
- reading nps status file is successfully!.
- nps status=0x504d4f43
- PMIC_IRQSRC = 0x0
- PMIC_IRQ1 = 0x0
- PMIC_IRQ2 = 0x18
- PMIC_IRQ3 = 0x0
- PMIC_IRQ4 = 0x10
- PMIC_STATUS1 = 0x2
- PMIC_STATUS2 = 0x16
- PMIC_STATUS3 = 0x3
- PMIC_STATUS4 = 0x22
- bootloader base address=0x4d400000
- LPDDR0 1st. cached=0x40000000, size=0xe400000
- LPDDR0 non-cached=0x4e400000, size=0xa00000
- LPDDR0 2nd. cached=0x4ee00000, size=0x1200000
- RST_STAT = 0x20000000
- get_hwrev() = 14
- board_process_platform: MAGIC 0 at 40000000!
- check_reboot: INFORM3 = 12345670
- save param.blk, size: 5268
- ...save param.blk successfully.
- save switch_sel(1)...ok
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- hw_pm_status: jig_status = 0, chg_status = 1
- s5p_set_high_clk: ARM Clock = 800MHz.
- ......kernel is non signed binary.
- DISPLAY_PATH_SEL[MDNIE 0x1]is on
- div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520
- MDNIE setting Init start!!
- vsync interrupt is off
- video interrupt is off
- [fb0] turn on
- MDNIE setting Init end!!
- Autoboot (0 seconds) in progress, press any key to stop
- boot_kernel: debug level low!
- checkbit: find RECOVERY
- checkbit (ffffffff)
- ......kernel is non signed binary.
- ATAG_CORE: 5 54410001 0 0 0
- MEMCONFIG: 20e01323 20e01323
- ATAG_MEM: 4 54410002 10000000 40000000
- ATAG_MEM: 4 54410002 10000000 50000000
- ATAG_MEM: 4 54410002 10000000 60000000
- ATAG_MEM: 4 54410002 10000000 70000000
- ATAG_SERIAL: 4 54410006 b7260f8e 304d1966
- ATAG_REVISION: 3 54410007 e
- hardware_ID : 001966b7260f8e
- ATAG_CMDLINE: 40 54410009 'loglevel=4 console=ram androidboot.serialno=001966b7260f8e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m'
- ATAG_NONE: 0 0
- Starting kernel at 0x40008000...
- <6>[ 0.182485] c0 audit: initializing netlink socket (disabled)
- <5>[ 0.182553] c0 type=2000 audit(0.180:1): initialized
- <4>[ 0.183122] c0 highmem bounce pool size: 64 pages
- <6>[ 0.183386] c0 ashmem: initialized
- <6>[ 0.196479] c1 fuse init (API version 7.16)
- <6>[ 0.196942] c1 msgmni has been set to 1100
- <7>[ 0.197071] c1 SELinux: Registering netfilter hooks
- <6>[ 0.197549] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197582] c1 FIPS: No test for cipher_null (cipher_null-generic)
- <6>[ 0.197688] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197725] c1 FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
- <6>[ 0.197822] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197855] c1 FIPS: No test for digest_null (digest_null-generic)
- <6>[ 0.197957] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.197992] c1 FIPS: No test for compress_null (compress_null-generic)
- <6>[ 0.198089] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198166] c1 FIPS: self-tests for non-FIPS md4-generic (md4) passed
- <6>[ 0.198279] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198345] c1 FIPS: self-tests for non-FIPS md5-generic (md5) passed
- <6>[ 0.198453] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198525] c1 FIPS: self-tests for sha1-generic (sha1) passed
- <6>[ 0.198634] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198698] c1 FIPS: self-tests for sha224-generic (sha224) passed
- <6>[ 0.198807] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.198861] c1 FIPS: self-tests for sha256-generic (sha256) passed
- <6>[ 0.198969] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199190] c1 FIPS: self-tests for sha384-generic (sha384) passed
- <6>[ 0.199301] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199512] c1 FIPS: self-tests for sha512-generic (sha512) passed
- <6>[ 0.199634] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199692] c0 FIPS: self-tests for des-generic (des) passed
- <6>[ 0.199803] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.199865] c0 FIPS: self-tests for des3_ede-generic (des3_ede) passed
- <6>[ 0.199975] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200012] c0 FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
- <6>[ 0.200161] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200248] c0 FIPS: self-tests for aes-generic (aes) passed
- <6>[ 0.200359] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.200395] c0 FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
- <6>[ 0.200494] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201001] c0 FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
- <6>[ 0.201141] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201230] c0 FIPS: self-tests for crc32c-generic (crc32c) passed
- <6>[ 0.201346] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.201381] c0 FIPS: No test for stdrng (krng)
- <6>[ 0.201480] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.224468] c0 FIPS: self-tests for ansi_cprng (stdrng) passed
- <6>[ 0.224593] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.224630] c0 FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
- <6>[ 0.224827] c1 FIPS: self-tests for non-FIPS md5 (md5) passed
- <6>[ 0.224966] c1 FIPS: self-tests for sha1 (sha1) passed
- <6>[ 0.225433] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.225529] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.225851] c0 FIPS: self-tests for ecb(des-generic) (ecb(des)) passed
- <6>[ 0.226441] c1 FIPS: self-tests for ecb(des) (ecb(des)) passed
- <6>[ 0.226827] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.226921] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227321] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.227458] c0 FIPS: self-tests for non-FIPS cbc(des-generic) (cbc(des)) passed
- <6>[ 0.227757] c1 FIPS: self-tests for non-FIPS cbc(des) (cbc(des)) passed
- <6>[ 0.228149] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228239] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.228348] c0 FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
- <6>[ 0.228580] c1 FIPS: self-tests for ecb(des3_ede) (ecb(des3_ede)) passed
- <6>[ 0.228964] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229053] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229459] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.229580] c0 FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
- <6>[ 0.229843] c1 FIPS: self-tests for cbc(des3_ede) (cbc(des3_ede)) passed
- <6>[ 0.229987] c1 FIPS: self-tests for non-FIPS md4 (md4) passed
- <6>[ 0.230175] c1 FIPS: self-tests for sha256 (sha256) passed
- <6>[ 0.230559] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230649] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.230856] c0 FIPS: self-tests for non-FIPS ecb(twofish-generic) (ecb(twofish)) passed
- <6>[ 0.231258] c1 FIPS: self-tests for non-FIPS ecb(twofish) (ecb(twofish)) passed
- <6>[ 0.231657] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.231751] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232161] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.232378] c0 FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed
- <6>[ 0.232852] c1 FIPS: self-tests for non-FIPS cbc(twofish) (cbc(twofish)) passed
- <6>[ 0.233249] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233339] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.233444] c0 FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
- <6>[ 0.233665] c1 FIPS: self-tests for ecb(aes) (ecb(aes)) passed
- <6>[ 0.234052] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234142] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234545] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.234678] c0 FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
- <6>[ 0.234959] c1 FIPS: self-tests for cbc(aes) (cbc(aes)) passed
- <6>[ 0.235376] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235466] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235872] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.235987] c0 FIPS: self-tests for ctr(aes-asm) (ctr(aes)) passed
- <6>[ 0.236237] c1 FIPS: self-tests for ctr(aes) (ctr(aes)) passed
- <6>[ 0.236623] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.236713] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237117] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.237528] c0 FIPS: self-tests for rfc3686(ctr(aes-asm)) (rfc3686(ctr(aes))) passed
- <6>[ 0.238368] c1 FIPS: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed
- <6>[ 0.238822] c1 FIPS: self-tests for sha384 (sha384) passed
- <6>[ 0.239252] c1 FIPS: self-tests for sha512 (sha512) passed
- <6>[ 0.240186] c1 FIPS: self-tests for non-FIPS deflate (deflate) passed
- <6>[ 0.240623] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.240718] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.240919] c0 FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
- <6>[ 0.241339] c1 FIPS: self-tests for non-FIPS ecb(arc4) (ecb(arc4)) passed
- <6>[ 0.241521] c1 FIPS: self-tests for crc32c (crc32c) passed
- <6>[ 0.241648] c1 FIPS: self-tests for sha224 (sha224) passed
- <6>[ 0.242044] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.242138] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.242548] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.242910] c0 FIPS: self-tests for non-FIPS cts(cbc(aes-asm)) (cts(cbc(aes))) passed
- <6>[ 0.243655] c1 FIPS: self-tests for non-FIPS cts(cbc(aes)) (cts(cbc(aes))) passed
- <6>[ 0.244053] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244142] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.244287] c0 FIPS: self-tests for non-FIPS hmac(md5-generic) (hmac(md5)) passed
- <6>[ 0.244598] c1 FIPS: self-tests for non-FIPS hmac(md5) (hmac(md5)) passed
- <6>[ 0.244995] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.245111] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.245289] c0 FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
- <6>[ 0.245669] c1 FIPS: self-tests for hmac(sha1) (hmac(sha1)) passed
- <6>[ 0.246066] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246161] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.246502] c0 FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
- <6>[ 0.247199] c1 FIPS: self-tests for hmac(sha256) (hmac(sha256)) passed
- <6>[ 0.247592] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.247683] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.248444] c0 FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
- <6>[ 0.249989] c1 FIPS: self-tests for hmac(sha384) (hmac(sha384)) passed
- <6>[ 0.250554] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.250644] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.251401] c0 FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
- <6>[ 0.252940] c1 FIPS: self-tests for hmac(sha512) (hmac(sha512)) passed
- <6>[ 0.253335] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.253423] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.253612] c0 FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
- <6>[ 0.254019] c1 FIPS: self-tests for hmac(sha224) (hmac(sha224)) passed
- <6>[ 0.300194] c1 FIPS: self-tests for ansi_cprng (ansi_cprng) passed
- <6>[ 0.300229] c1 FIPS: do kernel integrity check
- <6>[ 0.544663] c1 FIPS: integrity check passed
- <6>[ 0.544893] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
- <6>[ 0.544962] c1 FIPS: self-tests for non-FIPS ghash-generic (ghash) passed
- <6>[ 0.545101] c0 io scheduler noop registered
- <6>[ 0.545127] c0 io scheduler deadline registered
- <6>[ 0.545271] c0 io scheduler cfq registered
- <6>[ 0.545627] c0 io scheduler bfq registered
- <6>[ 0.545653] c0 BFQ I/O-scheduler: v7r8
- <6>[ 0.545676] c0 io scheduler row registered
- <6>[ 0.545701] c0 io scheduler sio registered (default)
- <3>[ 0.545922] c0 s3cfb s3cfb.0: div(32) max should be 16
- <6>[ 0.545955] c0 s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000
- <6>[ 0.546038] c0 s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff
- <6>[ 0.546307] c1 s3cfb s3cfb.0: [fb2] dma: 0x7143c000, cpu: 0xf28f9000, size: 0x002ee000
- <6>[ 0.548272] c1 sec_getlog_supply_fbinfo: 0x7143c000 480 800 32 2
- <6>[ 0.551099] c1 Bootloader sent 'bootloaderfb' : 5EC00000
- <6>[ 0.552112] c1 s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2
- <6>[ 0.552246] c0 s3cfb s3cfb.0: registered successfully
- <6>[ 0.553134] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD
- <6>[ 0.553173] c0 mdnie mdnie: registered successfully
- <6>[ 0.553628] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <6>[ 0.625337] c1 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
- <6>[ 0.640090] c1 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
- <6>[ 0.685084] c1 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
- <6>[ 0.688887] c1 console [ttySAC2] enabled
- <6>[ 0.765086] c1 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
- <4>[ 0.810440] c1 Mali: exynos_result_of_asv_group = 0x0, target_asv = 0x0
- <4>[ 0.810477] c1 Mali: mali_dvfs[0].vol = 900000
- <4>[ 0.810505] c1 Mali: init_gpu_vol = 900000
- <4>[ 0.810530] c1 Mali: mali_dvfs[1].vol = 900000
- <4>[ 0.810556] c1 Mali: mali_dvfs[2].vol = 950000
- <4>[ 0.810582] c1 Mali: mali_dvfs[3].vol = 1000000
- <4>[ 0.810676] c1 Mali: init_mali_clock mali_clock c141e1cc
- <4>[ 0.833444] c1 Initializing gpu clock control interface
- <4>[ 0.833821] c1 Initializing gpu voltage control interface
- <4>[ 0.835129] c0 Mali: Mali device driver loaded
- <4>[ 0.835488] c0 UMP: UMP device driver 0000 loaded
- <6>[ 0.843240] c0 brd: module loaded
- <6>[ 0.847115] c0 loop: module loaded
- <6>[ 0.847762] c0 sec_jack_probe : Registering jack driver
- <6>[ 0.848894] c0 wake enabled for irq 378
- <6>[ 0.849386] c0 input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0
- <6>[ 0.849447] c0 max8997_muic_cfg_uart_gpio: path=0
- <6>[ 0.849656] c0 max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20)
- <6>[ 0.850707] c0 Loading pn544 driver
- <6>[ 0.850764] c0 pn544_probe : IRQ num 367
- <6>[ 0.850978] c0 pn544_probe : requesting IRQ 367
- <6>[ 0.852787] c0 lcd panel: ld9040_probe : lcdtype : SM2_A2
- <6>[ 0.852820] c0 lcd panel: ld9040 panel driver has been probed.
- <6>[ 0.852998] c0 PPP generic driver version 2.4.2
- <6>[ 0.853322] c0 PPP Deflate Compression module registered
- <6>[ 0.853354] c0 PPP BSD Compression module registered
- <6>[ 0.853408] c0 PPP MPPE Compression module registered
- <6>[ 0.853437] c0 NET: Registered protocol family 24
- <6>[ 0.853466] c0 tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.853495] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.853862] c0 host_notifier host_notifier.0: notifier_prove
- <6>[ 0.854475] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.854830] c0 usbcore: registered new interface driver usblp
- <6>[ 0.854862] c0 Initializing USB Mass Storage driver...
- <6>[ 0.855184] c0 usbcore: registered new interface driver usb-storage
- <6>[ 0.855218] c0 USB Mass Storage support registered.
- <6>[ 0.855299] c0 otg pdata e40417c0, irq c0e35e90
- <6>[ 0.855724] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
- <6>[ 0.855762] c0 s3c-udc : version 15 March 2009
- <7>[ 0.855788] c0 init
- <7>[ 0.856293] c0 usb: android_bind disconnect
- <7>[ 0.856318] c0 usb: usb_gadget_disconnect
- <7>[ 0.858330] c1 usb: usb_string_id cdev(0xe41029c0)->next_string_id=1
- <6>[ 0.858495] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.858535] c0 android_usb gadget: Number of LUNs=2
- <6>[ 0.858565] c0 lun0: LUN: removable file: (no medium)
- <6>[ 0.858595] c0 lun1: LUN: removable file: (no medium)
- <7>[ 0.859426] c0 usb: usb_string_id cdev(0xe41029c0)->next_string_id=2
- <7>[ 0.859462] c0 usb: usb_string_id cdev(0xe41029c0)->next_string_id=3
- <7>[ 0.859502] c0 usb: usb_string_id cdev(0xe41029c0)->next_string_id=4
- <7>[ 0.859537] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
- <7>[ 0.859568] c0 usb: composite_bind bcdDevice=0x0
- <7>[ 0.859594] c0 usb: composite_bind composite_manufacturer=
- <6>[ 0.859629] c0 android_usb gadget: android_usb ready
- <6>[ 0.859655] c0 usb: Skip udc_enable
- <6>[ 0.860770] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
- <7>[ 0.861008] c0 [keys]PWR 0
- <6>[ 0.861493] c0 input: sec_touchscreen as /devices/virtual/input/input2
- <6>[ 0.980509] c0 Atmel MXT224 3-004a: family = 0x80, variant = 0x1, version= 0x16, build = 171
- <3>[ 0.980555] c0 [TSP] family = 0x80, variant = 0x1, version = 0x16, build = 171
- <3>[ 0.994701] c0 [TSP] TSP chip is MXT224
- <3>[ 1.065050] c0 [TSP] ta_status is 0
- <3>[ 1.066897] c0 [TSP] mxt224_ta_probe
- <3>[ 1.071067] c0 [TSP]TA_probe MXT224 T9 Byte7 is 55
- <3>[ 1.076155] c0 [TSP] calibration success!!!
- <3>[ 1.080230] c0 [TSP] Calibration!!!!!!
- <3>[ 1.083130] c0 [TSP] +mxt224_optical_gain()
- <3>[ 1.305461] c0 [TSP] -mxt224_optical_gain()
- <6>[ 1.335055] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR
- <6>[ 1.360054] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL
- <6>[ 1.385198] c0 max8997_rtc_enable_smpl: WTSR_SMPL(0xc3)
- <6>[ 1.386759] c0 using rtc device, max8997-rtc, for alarms
- <6>[ 1.386813] c0 max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0
- <4>[ 1.387150] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
- <6>[ 1.387540] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
- <6>[ 1.387731] c0 i2c /dev entries driver
- <6>[ 1.390444] c0 lirc_dev: IR Remote Control driver registered, major 250
- <6>[ 1.390481] c0 IR NEC protocol handler initialized
- <6>[ 1.390507] c0 IR RC5(x) protocol handler initialized
- <6>[ 1.390534] c0 IR RC6 protocol handler initialized
- <6>[ 1.390560] c0 IR JVC protocol handler initialized
- <6>[ 1.390585] c0 IR Sony protocol handler initialized
- <6>[ 1.390611] c0 IR RC5 (streamzap) protocol handler initialized
- <6>[ 1.390642] c0 IR LIRC bridge handler initialized
- <6>[ 1.390667] c0 Linux video capture interface: v2.00
- <7>[ 1.390950] c0 [S5K5BAFX] s5k5bafx_create_sysfs
- <6>[ 1.391392] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
- <6>[ 1.391459] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
- <4>[ 1.391624] c0 Initialize JPEG driver
- <4>[ 1.392091] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
- <6>[ 1.392345] c0 s5p_int_src_ext_hpd()
- <6>[ 1.392372] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.392564] c0 s5p_hpd_read_gpio(0)
- <6>[ 1.392961] c0 i2c i2c-7: attached s5p_ddc into i2c adapter successfully
- <4>[ 1.393106] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
- <4>[ 1.393140] c0 i2c-core: driver [s5p_ddc] using legacy resume method
- <6>[ 1.393643] c1 MFC(Multi Function Codec - FIMV v5.x) registered successfully
- <6>[ 1.394524] c1 sii9234_cfg_gpio()
- <6>[ 1.394556] c1 Registered chained gpio int handler for interrupt 111.
- <6>[ 1.394603] c1 Registered interrupt support for gpio group 10.
- <6>[ 1.394638] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.394845] c1 s5p_gpioint_set_type irq:397 is at GPF3(5)
- <6>[ 1.394954] c1 sii9234 : create mhl sysfile
- <6>[ 1.395550] c1 input: sii9234_rcp as /devices/virtual/input/input3
- <6>[ 1.396448] c1 max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading
- <6>[ 1.398163] c0 max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading
- <6>[ 1.398274] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0
- <6>[ 1.398674] c0 max17042 9-0036: max17042_probe: MAX17042 Driver Loading
- <6>[ 1.398890] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 1.399588] c0 max17042 9-0036: max17042_probe : is enable (1)
- <6>[ 1.399621] c0 max17042 9-0036: max17042_init_regs
- <6>[ 1.400893] c0 max17042 9-0036: fuel alert soc (2)
- <6>[ 1.400922] c0 max17042 9-0036: max17042_alert_init
- <6>[ 1.402526] c1 wake enabled for irq 371
- <6>[ 1.403641] c1 max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371)
- <6>[ 1.404290] c1 max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460
- <6>[ 1.404340] c1 max17042 9-0036: max17042_probe: MAX17042 Driver Loaded
- <4>[ 1.405242] c0 i2c-core: driver [max17042] using legacy suspend method
- <4>[ 1.405279] c0 i2c-core: driver [max17042] using legacy resume method
- <6>[ 1.406231] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 1.406317] c0 Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.406347] c0 Bluetooth: HCI H4 protocol initialized
- <6>[ 1.406928] c1 max17042 9-0036: max17042_get_soc : soc(3fb7)
- <6>[ 1.406960] c0 cpuidle: using governor ladder
- <6>[ 1.406989] c1 max17042_need_soc_recal: HW(0xe)
- <6>[ 1.407020] c1 max17042 9-0036: max17042_get_soc : use raw (63), soc (65)
- <6>[ 1.407844] c0 cpuidle: using governor menu
- <6>[ 1.407995] c0 mshci: Mobile Storage Host Controller Interface driver
- <6>[ 1.408029] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
- <6>[ 1.408196] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz)
- <3>[ 1.408469] c0 mmc0: Version ID 0x5342230a.
- <6>[ 1.411465] c0 mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ###########
- <6>[ 1.411927] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
- <6>[ 1.412197] c0 sdhci: Secure Digital Host Controller Interface driver
- <6>[ 1.412231] c0 sdhci: Copyright(c) Pierre Ossman
- <6>[ 1.412346] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz)
- <6>[ 1.412592] c0 mmc1: vtf_2.8v regulator found
- <3>[ 1.440359] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.444033] c0 mmc0: cmd 52 response timeout error
- <3>[ 1.452050] c0 mmc0: cmd 8 response timeout error
- <3>[ 1.455654] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.460299] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.464984] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.469687] c0 mmc0: cmd 5 response timeout error
- <3>[ 1.474403] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.479174] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.483948] c0 mmc0: cmd 55 response timeout error
- <3>[ 1.488722] c0 mmc0: cmd 55 response timeout error
- <6>[ 1.511809] c1 mmc0: VYL00M: 15010056594c30304d1966b7260f8e0d
- <6>[ 1.560487] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- <6>[ 1.560677] c0 wake enabled for irq 380
- <6>[ 1.560701] c0 mmc1: card inserted.
- <6>[ 1.560791] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
- <3>[ 1.560866] c0 mmc2: no vmmc regulator found
- <6>[ 1.563880] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
- <6>[ 1.569123] c0 usbcore: registered new interface driver usbhid
- <6>[ 1.569156] c0 usbhid: USB HID core driver
- <6>[ 1.569672] c0 logger: created 2048K log 'log_main'
- <6>[ 1.569866] c0 logger: created 256K log 'log_events'
- <6>[ 1.570087] c0 logger: created 1024K log 'log_radio'
- <6>[ 1.570283] c0 logger: created 256K log 'log_system'
- <6>[ 1.570477] c0 logger: created 256K log 'log_sf'
- <6>[ 1.570508] c0 sec_getlog_supply_loggerinfo: 0xc1667350 0xc1567350 0xc1527350 0xc14e7350
- <6>[ 1.571142] c0 zram: num_devices not specified. Using default: 1
- <6>[ 1.571175] c0 zram: Creating 1 devices ...
- <6>[ 1.571831] c0 k3dh_probe: is started.
- <3>[ 1.572171] c0 using defualt position
- <6>[ 1.574874] c0 k3dh_probe: is successful.
- <6>[ 1.575574] c0 input: gyro_sensor as /devices/virtual/input/input4
- <6>[ 1.576448] c0 akm8975_probe is called.
- <6>[ 1.577974] c0 akm8975_probe: asa_x = 170, asa_y = 168, asa_z = 178
- <6>[ 1.578467] c0 Registered sensors device: magnetic_sensor
- <6>[ 1.578508] c0 akm8975_probe is successful.
- <6>[ 1.585637] c0 mmc0 : 00 : 25 : 20110416 : 0.
- <4>[ 1.586978] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.587013] c0 mmc0: power class selection to bus width 8 failed
- <4>[ 1.591794] c0 mmc0: Voltage range not supported for power class.
- <3>[ 1.591829] c0 mmc0: power class selection to bus width 8 ddr 2 failed
- <6>[ 1.598263] c0 mmc0: new high speed DDR MMC card at address 0001
- <6>[ 1.598727] c1 mmcblk0: mmc0:0001 VYL00M 14.6 GiB
- <6>[ 1.605624] c1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
- <3>[ 1.635314] c0 cm3663_setup_reg: initial proximity value = 1
- <6>[ 1.639522] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.639884] c0 mmc1: cmd 52 command timeout error
- <6>[ 1.640690] c1 input: proximity_sensor as /devices/virtual/input/input5
- <6>[ 1.641330] c1 input: light_sensor as /devices/virtual/input/input6
- <6>[ 1.643843] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.644190] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.644471] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
- <6>[ 1.644524] c0 mmc1: cmd 5 command timeout error
- <6>[ 1.644636] c0 audss_init: RCLK SRC[busclk]
- <6>[ 1.644733] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.644856] c0 mmc1: cmd 5 command timeout error
- <7>[ 1.645043] c0 pmu_debug: 0x00000900
- <6>[ 1.655464] c0 audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.655507] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7]
- <7>[ 1.655544] c0 i2s_txctrl: Turn Off - spr is no active
- <6>[ 1.655590] c0 audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.655624] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42]
- <6>[ 1.669902] c0 mmc1: new high speed SD card at address 0001
- <6>[ 1.670428] c0 mmcblk1: mmc1:0001 00000 1.89 GiB
- <6>[ 1.671606] c1 mmcblk1: p1
- <6>[ 1.719498] c0 asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok
- <6>[ 1.720666] c0 Samsung SRP driver, (c) 2010 Samsung Electronics
- <6>[ 1.728592] c0 SRP: Driver successfully probed
- <6>[ 1.728790] c0 ALSA device list:
- <6>[ 1.728813] c0 #0: U1-YMU823
- <6>[ 1.728951] c0 GACT probability NOT on
- <6>[ 1.728981] c0 Mirror/redirect action on
- <6>[ 1.729006] c0 u32 classifier
- <6>[ 1.729024] c0 Actions configured
- <6>[ 1.729047] c0 Netfilter messages via NETLINK v0.30.
- <6>[ 1.729128] c0 nf_conntrack version 0.5.0 (12391 buckets, 49564 max)
- <6>[ 1.730005] c0 ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.730110] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.730148] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.730856] c0 xt_time: kernel timezone is -0000
- <6>[ 1.732368] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.732528] c0 arp_tables: (C) 2002 David S. Miller
- <6>[ 1.732595] c0 TCP cubic registered
- <6>[ 1.732618] c0 TCP westwood registered
- <6>[ 1.733713] c0 NET: Registered protocol family 10
- <6>[ 1.736308] c0 Mobile IPv6
- <6>[ 1.736355] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.736579] c0 IPv6 over IPv4 tunneling driver
- <6>[ 1.741306] c0 NET: Registered protocol family 17
- <6>[ 1.741359] c0 NET: Registered protocol family 15
- <6>[ 1.741492] c1 Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.741535] c1 Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.741565] c1 Bluetooth: RFCOMM ver 1.11
- <6>[ 1.741590] c1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.741622] c1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.741875] c1 NET: Registered protocol family 35
- <5>[ 1.742438] c1 Registering the dns_resolver key type
- <6>[ 1.742489] c1 EXYNOS4210: Adaptive Support Voltage init
- <6>[ 1.742744] c0 exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V)
- <6>[ 1.743297] c0 EXYNOS4: HPM value = 20
- <6>[ 1.743353] c0 EXYNOS4: IDS value = 30
- <6>[ 1.743376] c0 <6>Support 1.2GHz
- <6>[ 1.743396] c0 <6>ASV Group for This Exynos4210 is 0x40000004
- <6>[ 1.743436] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
- <5>[ 1.743498] c0 Registering SWP/SWPB emulation handler
- <6>[ 1.743587] c0 DVFS : VDD_ARM Voltage table set with 4 Group
- <6>[ 1.743618] c0 max8997_set_arm_voltage_table
- <6>[ 1.743651] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[0]=1300000, buck1_vol[1]=26
- <6>[ 1.743854] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[1]=1250000, buck1_vol[2]=24
- <6>[ 1.744049] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[2]=1150000, buck1_vol[3]=20
- <6>[ 1.744243] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[3]=1050000, buck1_vol[4]=16
- <6>[ 1.744435] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[4]=975000, buck1_vol[5]=13
- <6>[ 1.744629] c0 max8997-pmic max8997-pmic: max8997_set_buck1_voltages: buck1_voltages[5]=950000, buck1_vol[6]=12
- <6>[ 1.744824] c0 max8997-pmic max8997-pmic: max8997_set_buck1_dvs_table: enable BUCK1 GPIO DVS
- <4>[ 1.745360] c1 ------------[ cut here ]------------
- <4>[ 1.745406] c1 WARNING: at ../../../../../../kernel/samsung/smdk4412-GeniSys/fs/sysfs/dir.c:455 sysfs_add_one+0xa4/0xc4()
- <4>[ 1.745461] c1 sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies'
- <4>[ 1.745515] c1 Modules linked in:
- <4>[ 1.745537] c1 Backtrace:
- <4>[ 1.745576] c1 [<c0b5a79c>] (dump_backtrace+0x0/0x10c) from [<c10e5454>] (dump_stack+0x18/0x1c)
- <4>[ 1.745620] c1 r7:000001c7 r6:c12200c0 r5:00000009 r4:e4043ed0
- <4>[ 1.745672] c1 [<c10e543c>] (dump_stack+0x0/0x1c) from [<c0b95978>] (warn_slowpath_common+0x5c/0x6c)
- <4>[ 1.745725] c1 [<c0b9591c>] (warn_slowpath_common+0x0/0x6c) from [<c0b959c0>] (warn_slowpath_fmt+0x38/0x40)
- <4>[ 1.745773] c1 r9:00000000 r8:00000000 r7:e4043f18 r6:e46c5bd0 r5:e4099000
- <4>[ 1.745820] c1 r4:c1220104
- <4>[ 1.745846] c1 [<c0b95988>] (warn_slowpath_fmt+0x0/0x40) from [<c0c7d568>] (sysfs_add_one+0xa4/0xc4)
- <4>[ 1.745893] c1 r3:e4099000 r2:c1220104
- <4>[ 1.745920] c1 r4:ffffffef
- <4>[ 1.745946] c1 [<c0c7d4c4>] (sysfs_add_one+0x0/0xc4) from [<c0c7c694>] (sysfs_add_file_mode+0x4c/0xac)
- <4>[ 1.745994] c1 r7:00000013 r6:e28f4930 r5:c14649f0 r4:e46c5bd0
- <4>[ 1.746042] c1 [<c0c7c648>] (sysfs_add_file_mode+0x0/0xac) from [<c0c7c724>] (sysfs_create_file+0x30/0x44)
- <4>[ 1.746090] c1 r6:c0b99c74 r5:e28f6894 r4:c144dcf4
- <4>[ 1.746134] c1 [<c0c7c6f4>] (sysfs_create_file+0x0/0x44) from [<c0de52bc>] (create_standard_UV_interfaces+0x54/0x58)
- <4>[ 1.746200] c1 [<c0de5268>] (create_standard_UV_interfaces+0x0/0x58) from [<c0ec9c68>] (cpufreq_register_driver+0x150/0x184)
- <4>[ 1.746256] c1 r5:00000000 r4:c14e6328
- <4>[ 1.746295] c1 [<c0ec9b18>] (cpufreq_register_driver+0x0/0x184) from [<c000f954>] (exynos_cpufreq_init+0x150/0x1b0)
- <4>[ 1.746347] c1 r7:00000013 r6:c0b99c74 r5:c14bcc50 r4:c14bcc50
- <4>[ 1.746400] c1 [<c000f804>] (exynos_cpufreq_init+0x0/0x1b0) from [<c0b5092c>] (do_one_initcall+0x12c/0x184)
- <4>[ 1.746449] c1 r5:e4042020 r4:c14bc6a0
- <4>[ 1.746483] c1 [<c0b50800>] (do_one_initcall+0x0/0x184) from [<c0008ad8>] (kernel_init+0xcc/0x154)
- <4>[ 1.746535] c1 [<c0008a0c>] (kernel_init+0x0/0x154) from [<c0b99c74>] (do_exit+0x0/0x720)
- <4>[ 1.746589] c1 ---[ end trace 94e8369b1e736600 ]---
- <6>[ 1.746623] c1 DVFS : VDD_INT Voltage table set with 4 Group
- <6>[ 1.746993] c1 exynos4_pm_hotplug_device_init: 0
- <6>[ 1.747022] c1 EXYNOS4 PM-hotplug init function
- <7>[ 1.747623] c1 mif: set_hsic_lpa_states: 281: called(s5p_usb_phy_init+0x150/0x5b0):
- <6>[ 1.747668] c1 s5p-ehci s5p-ehci: usb phy usage(2)
- <6>[ 1.747812] c1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- <6>[ 1.748140] c1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- <6>[ 1.748297] c1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- <6>[ 1.755096] c1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- <6>[ 1.755189] c1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.755229] c1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.755268] c1 usb usb1: Product: S5P EHCI Host Controller
- <6>[ 1.755299] c1 usb usb1: Manufacturer: Linux 3.0.101r6-GeniSys.Kernel+ ehci_hcd
- <6>[ 1.755336] c1 usb usb1: SerialNumber: s5p-ehci
- <6>[ 1.755924] c1 hub 1-0:1.0: USB hub found
- <6>[ 1.755960] c1 hub 1-0:1.0: 3 ports detected
- <6>[ 1.756309] c1 CP not ready, Active State low
- <6>[ 1.756443] c1 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 3, 2nd_throttle = 5
- <6>[ 1.756483] c1 @@@ get_refresh_interval = 0x2e
- <6>[ 1.756508] c1 @@@ get_refresh_interval = 0x5d
- <6>[ 1.756540] c1 ** temperature set value **
- <6>[ 1.756560] c1 1st throttling stop_temp = 61, start_temp = 64
- <6>[ 1.756588] c1 2nd throttling stop_temp = 87, start_tmep = 103
- <6>[ 1.756617] c1 tripping temp = 110, s/w emergency temp = 120
- <6>[ 1.756648] c1 mem throttling stop_temp = 80, start_temp = 85
- <6>[ 1.756793] c0 exynos4210_tmu_init: triminfo = 0x0000004d, low 8bit = 0x4d, high 24 bit = 0x000000
- <6>[ 1.756846] c0 THD_TEMP:0x71: TRIG_LEV0: 0x03
- <6>[ 1.756868] c0 TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff
- <6>[ 1.807091] c0 [MODEM_IF] init_modem
- <3>[ 1.807128] c0 check phone active = 94
- <6>[ 1.809416] c0 umts_modem_cfg_gpio done
- <6>[ 1.809449] c0 modem_link_pm_config_gpio done
- <3>[ 1.809711] c0 mif: modem_probe: modem_if
- <6>[ 1.814364] c0 mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0
- <6>[ 1.814540] c0 wake enabled for irq 366
- <6>[ 1.814565] c0 mif: create_modemctl_device: xmm6260 is created!!!
- <6>[ 1.815083] c1 wake enabled for irq 361
- <6>[ 1.815344] c0 usbcore: registered new interface driver cdc_modem
- <6>[ 1.815389] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe444c400)
- <6>[ 1.815426] c0 mif: hsic_create_link_device: usb : create_link_device DONE
- <3>[ 1.815462] c0 mif: modem_probe: link created: usb
- <6>[ 1.819171] c0 mif: create_io_device: Bood device = umts_boot0
- <6>[ 1.828367] c0 mif: modem_probe: Complete!!!
- <4>[ 1.830365] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
- <6>[ 1.831895] c0 OTG s5pc110_otg_module_init(380): s3c_otg_module_init
- <6>[ 1.832070] c0 otg host_probe start c0e238cc
- <6>[ 2.035072] c1 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <7>[ 2.035144] c1 [TouchKey] i2c_touchkey_probe
- <6>[ 2.035481] c1 input: sec_touchkey as /devices/virtual/input/input7
- <7>[ 2.090594] c0 [TouchKey] Module Version: 12
- <6>[ 2.090625] c0 s5p_gpioint_set_type irq:389 is at GPL0(5)
- <6>[ 2.092738] c0 max8997-rtc max8997-rtc: setting system clock to 2015-11-09 08:47:29 UTC (1447058849)
- <6>[ 2.092877] c0 ctrl->mem.size = 0x500000
- <6>[ 2.092901] c0 ctrl->mem.base = 0x70f3c000
- <6>[ 2.093018] c0
- <6>[ 2.093029] c0
- <6>[ 2.093040] c0
- <6>[ 2.093050] c0 cam_cfg_gpio: pdev->id=0
- <6>[ 2.093358] c0 FIMC0 registered successfully
- <6>[ 2.093479] c1 ctrl->mem.size = 0x0
- <6>[ 2.093501] c1 ctrl->mem.base = 0xffffffea
- <6>[ 2.093803] c1 FIMC1 registered successfully
- <6>[ 2.093921] c0 ctrl->mem.size = 0x1900000
- <6>[ 2.093945] c0 ctrl->mem.base = 0x6f63c000
- <6>[ 2.094243] c0 FIMC2 registered successfully
- <6>[ 2.094360] c1 ctrl->mem.size = 0x700000
- <6>[ 2.094384] c1 ctrl->mem.base = 0x6ef3c000
- <6>[ 2.094682] c1 FIMC3 registered successfully
- <6>[ 2.094928] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
- <6>[ 2.118032] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- <6>[ 2.118075] c0 sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger)
- <6>[ 2.118508] c0 sec_bat_get_lpcharging_state: LP charging:0
- <4>[ 2.119234] c0 Initializing charge current control interface
- <6>[ 2.119623] c0 sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded
- <6>[ 2.119917] c0 sec-battery sec-battery: sec_bat_check_vf: Battery Health (1)
- <6>[ 2.120062] c0 sec-battery sec-battery: sec_bat_check_temper: recovery count = 0
- <6>[ 2.120594] c0 sec-battery sec-battery: sec_bat_check_temper: temp=350, adc=751
- <6>[ 2.120644] c0 sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing
- <6>[ 2.120709] c0 max8922-charger max8922-charger: max8922_is_charging: charging state = 0x1
- <6>[ 2.120756] c0 sec-battery sec-battery: soc(65), vfocv(3890), vcell(3955), temp(35), charging(1), health(1), chg_adc(0)
- <4>[ 2.121884] c1 Warning: unable to open an initial console.
- <6>[ 2.123788] c1 Freeing init memory: 11552K
- <5>[ 2.178143] c1 init: init started!
- <3>[ 2.179413] c1 SELinux: policydb version 30 does not match my version range 15-26
- <3>[ 2.185735] c1 init: SELinux: Could not load policy: Invalid argument
- <3>[ 2.192258] c1 init: failed to load policy: Invalid argument
- <3>[ 2.197812] c1 init: Security failure; rebooting into recovery mode...
- <6>[ 2.204411] c1 SysRq : Emergency Remount R/O
- <4>[ 2.208583] c1 Emergency Remount complete
- <0>[ 2.208865] c1 (sec_debug_set_upload_magic) 0
- <6>[ 2.213332] c1 REBOOT Notifier for CPUFREQ
- <6>[ 2.213968] c0 REBOOT Notifier for BUSFREQ
- <3>[ 2.213996] c0 hotplug_reboot_notifier_call: disabling pm hotplug
- <6>[ 2.219057] c0 mif: xmm6260_off: xmm6260_off()
- <6>[ 2.219782] c0 mc1n2_i2c_shutdown
- <7>[ 2.220603] c0 pmu_debug: 0x00000901
- <6>[ 2.230618] c0 mc1n2_i2c_shutdown done
- <6>[ 2.230652] c0 max8997-muic max8997-muic: max8997_muic_shutdown: JIGSet: auto detection
- <6>[ 2.231073] c0 max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: disable WTSR
- <6>[ 2.255260] c0 max8997_rtc_shutdown: WTSR_SMPL reg(0x80)
- <6>[ 2.255289] c0 max8997_rtc_shutdown: success to disable WTSR
- <6>[ 2.255373] c0 k3dh_shutdown: is called.
- <6>[ 2.255583] c0 pn544_shutdown
- <6>[ 2.256442] c0 sdhci_shutdown_host : MMC Card OFF
- <4>[ 2.256570] c0 Disabling non-boot CPUs ...
- <4>[ 2.256996] c1 IRQ112 no longer affine to CPU1
- <5>[ 2.257226] c0 CPU1: shutdown
- <0>[ 2.257726] c0 Restarting system with command 'recovery'.
- <0>[ 2.261689] c0 pid = 1 name:init
- <0>[ 2.264919] c0 sec_reboot (104, recovery)
- Ibl: pbl_read_emmc441() read 8k
- Ibl: pbl_read_emmc441() read 96k
- Ibl: pbl_read_emmc441() read download info
- Ibl: pbl_read_emmc441() endop
- Ibl: jump() verify_binary_integrity...ok
- Ibl: jump() jump!!!
- Welcome to Samsung Primitive Bootloader.
- build time: Sep 19 2012 18:31:37
- current time: 0/1/7 0:18:14
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- <display_card_info:1009> ext_csd
- <display_card_info:1011>card_size: 15028
- Total Card Size: 15029 MByte
- mmc_init: card initialization completed!
- pbl found bootable sbl in #49152.
- jump to sbl 0x4d400000.
- Secondary Bootloader v3.1 version.
- Copyright (C) 2011 System S/W Group. Samsung Electronics Co., Ltd.
- Board: C1 REV 02 / Sep 19 2012 18:31:42
- current time: 0/1/7 0:18:15
- booting code=0x0
- [set_mmc_ocr] Sector Mode
- [hsmmc_init] MMC card is detected
- Product Name : VYL00M
- CID:150100 56594c30 304d1966 b7260f8e
- <display_card_info:1046> ext_csd
- <display_card_info:1048>card_size: 15028
- Total Card Size: 15029 MByte
- Total Sector Count: 30777344
- MoviNand Initialization Complete!
- ===== PARTITION INFORMATION =====
- ID : GANG (0x0)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : BOOT (0x1)
- DEVICE : MMC
- FIRST UNIT : 0
- NO. UNITS : 0
- =================================
- ID : EFS (0x4)
- DEVICE : MMC
- FIRST UNIT : 8192
- NO. UNITS : 40960
- =================================
- ID : SBL1 (0x2)
- DEVICE : MMC
- FIRST UNIT : 49152
- NO. UNITS : 2560
- =================================
- ID : SBL2 (0x3)
- DEVICE : MMC
- FIRST UNIT : 53248
- NO. UNITS : 2560
- =================================
- ID : PARAM (0x5)
- DEVICE : MMC
- FIRST UNIT : 57344
- NO. UNITS : 16384
- =================================
- ID : KERNEL (0x6)
- DEVICE : MMC
- FIRST UNIT : 73728
- NO. UNITS : 16384
- =================================
- ID : RECOVERY (0x7)
- DEVICE : MMC
- FIRST UNIT : 90112
- NO. UNITS : 16384
- =================================
- ID : CACHE (0x8)
- DEVICE : MMC
- FIRST UNIT : 106496
- NO. UNITS : 204800
- =================================
- ID : MODEM (0x9)
- DEVICE : MMC
- FIRST UNIT : 311296
- NO. UNITS : 32768
- =================================
- ID : FACTORYFS (0xa)
- DEVICE : MMC
- FIRST UNIT : 344064
- NO. UNITS : 2097152
- =================================
- ID : DATAFS (0xb)
- DEVICE : MMC
- FIRST UNIT : 2441216
- NO. UNITS : 12582912
- =================================
- ID : UMS (0xc)
- DEVICE : MMC
- FIRST UNIT : 15024128
- NO. UNITS : 14696448
- =================================
- ID : HIDDEN (0xd)
- DEVICE : MMC
- FIRST UNIT : 29720576
- NO. UNITS : 1048576
- =================================
- loke_init: j4fs_open..success
- <start_checksum:1033>CHECKSUM_HEADER_SECTOR :42
- <start_checksum:1035>offset:42, size:1024
- Not Need Movinand Checksum
- load_lfs_parameters valid magic code and version.
- switch_sel_str='1'
- load_debug_level: read debug level successfully(0x574f4c44)...LOW
- init_ddi_data: usable ddi data.
- init_fuel_gauge : not por status
- fuel_gauge_get_version: [1]=0, [0]=92
- init_fuel_gauge: vcell = 3985 mV, vfocv = 3891 mV, soc = 63
- init_fuel_gauge : check s/w reset (20000000) : use wide tolerance
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- 7142 = (397000 - 350354)*15312/100000
- [2] 394708 = (7142 * 100000) / 16565 + 351593
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL1:0x9
- init_microusb_ic: MUIC: CONTROL2:0x3a
- init_microusb_ic: MUIC: CONTROL2:0x3a
- reading nps status file is successfully!.
- nps status=0x504d4f43
- PMIC_IRQSRC = 0x0
- PMIC_IRQ1 = 0x0
- PMIC_IRQ2 = 0x18
- PMIC_IRQ3 = 0x0
- PMIC_IRQ4 = 0x10
- PMIC_STATUS1 = 0x2
- PMIC_STATUS2 = 0x16
- PMIC_STATUS3 = 0x3
- PMIC_STATUS4 = 0x1a
- bootloader base address=0x4d400000
- LPDDR0 1st. cached=0x40000000, size=0xe400000
- LPDDR0 non-cached=0x4e400000, size=0xa00000
- LPDDR0 2nd. cached=0x4ee00000, size=0x1200000
- RST_STAT = 0x20000000
- get_hwrev() = 14
- board_process_platform: MAGIC 0 at 40000000!
- check_reboot: INFORM3 = 12345674
- save param.blk, size: 5268
- ......save param.blk successfully.
- save switch_sel(1)...ok
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- microusb_get_attached_device: STATUS1:0x3f, 2:0x41
- hw_pm_status: jig_status = 0, chg_status = 1
- s5p_set_high_clk: ARM Clock = 800MHz.
- ......kernel is non signed binary.
- DISPLAY_PATH_SEL[MDNIE 0x1]is on
- div:2, FB_SOURCE_CLOCK:667000000, FB_PIXEL_CLOCK:25067520
- MDNIE setting Init start!!
- vsync interrupt is off
- video interrupt is off
- [fb0] turn on
- MDNIE setting Init end!!
- Autoboot (0 seconds) in progress, press any key to stop
- boot_kernel: debug level low!
- checkbit: find RECOVERY
- checkbit (ffffffff)
- ......kernel is non signed binary.
- ATAG_CORE: 5 54410001 0 0 0
- MEMCONFIG: 20e01323 20e01323
- ATAG_MEM: 4 54410002 10000000 40000000
- ATAG_MEM: 4 54410002 10000000 50000000
- ATAG_MEM: 4 54410002 10000000 60000000
- ATAG_MEM: 4 54410002 10000000 70000000
- ATAG_SERIAL: 4 54410006 b7260f8e 304d1966
- ATAG_REVISION: 3 54410007 e
- hardware_ID : 001966b7260f8e
- ATAG_CMDLINE: 47 54410009 'loglevel=4 console=ram bootmode=2 s3cfb.progress=0 androidboot.serialno=001966b7260f8e sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m'
- ATAG_NONE: 0 0
Add Comment
Please, Sign In to add comment