Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-47-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: TOSHIBA MQ04ABF100
- Serial Number: Y7T9P44GT
- LU WWN Device Id: 5 000039 822587dec
- Firmware Version: JU001J
- User Capacity: 1 000 204 886 016 bytes [1,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Sep 17 18:48:20 2020 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 112) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 120) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 170) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1365
- 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 16726
- 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 1758
- 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 4069
- 10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3381
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 472
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 359
- 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 37112
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 46 (Min/Max 15/55)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1758
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 112
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
- 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
- 222 Loaded_Hours 0x0032 091 091 000 Old_age Always - 3926
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
- 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 282
- 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 822 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 822 occurred at disk power-on lifetime: 4069 hours (169 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 38 18 96 1c 40 Error: UNC at LBA = 0x001c9618 = 1873432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 38 18 96 1c 40 00 00:00:26.447 READ FPDMA QUEUED
- ef 10 03 00 00 00 a0 00 00:00:26.446 SET FEATURES [Enable SATA feature]
- ef 10 02 00 00 00 a0 00 00:00:26.446 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:00:26.445 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:00:26.443 IDENTIFY DEVICE
- Error 821 occurred at disk power-on lifetime: 4069 hours (169 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 98 18 96 1c 40 Error: UNC at LBA = 0x001c9618 = 1873432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 98 18 96 1c 40 00 00:00:25.703 READ FPDMA QUEUED
- ef 10 03 00 00 00 a0 00 00:00:25.702 SET FEATURES [Enable SATA feature]
- ef 10 02 00 00 00 a0 00 00:00:25.702 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:00:25.701 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:00:25.700 IDENTIFY DEVICE
- Error 820 occurred at disk power-on lifetime: 4069 hours (169 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 a8 18 96 1c 40 Error: UNC at LBA = 0x001c9618 = 1873432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 a8 18 96 1c 40 00 00:00:24.985 READ FPDMA QUEUED
- 60 20 a0 e8 95 1c 40 00 00:00:24.985 READ FPDMA QUEUED
- 60 08 98 e0 95 1c 40 00 00:00:24.984 READ FPDMA QUEUED
- 60 20 90 a8 95 1c 40 00 00:00:24.984 READ FPDMA QUEUED
- 60 08 88 a0 95 1c 40 00 00:00:24.983 READ FPDMA QUEUED
- Error 819 occurred at disk power-on lifetime: 4069 hours (169 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 90 18 96 1c 40 Error: UNC at LBA = 0x001c9618 = 1873432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 90 18 96 1c 40 00 00:00:13.335 READ FPDMA QUEUED
- ef 10 03 00 00 00 a0 00 00:00:13.334 SET FEATURES [Enable SATA feature]
- ef 10 02 00 00 00 a0 00 00:00:13.334 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:00:13.333 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:00:13.332 IDENTIFY DEVICE
- Error 818 occurred at disk power-on lifetime: 4069 hours (169 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 b8 18 96 1c 40 Error: UNC at LBA = 0x001c9618 = 1873432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 b8 18 96 1c 40 00 00:00:12.591 READ FPDMA QUEUED
- ef 10 03 00 00 00 a0 00 00:00:12.590 SET FEATURES [Enable SATA feature]
- ef 10 02 00 00 00 a0 00 00:00:12.590 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 e0 00 00:00:12.589 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:00:12.588 IDENTIFY DEVICE
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 00% 4069 976651504
- # 2 Short offline Completed: read failure 00% 4069 976651504
- # 3 Short offline Completed: read failure 00% 4069 976651504
- # 4 Extended offline Aborted by host 90% 4069 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement