API tools faq
paste
Guest User

Untitled

a guest
Sep 23rd, 2024
37
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.92 KB | Fixit | 0 0
raw download clone embed print report
  1. root@A20-OLinuXino:/home/olimex# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Linux version 3.4.103-00033-g9a1cd034181a-dirty (root@debian) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #49 SMP PREEMPT Fri May 18 16:07:20 EEST 2018
  6. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: sun7i
  9. [ 0.000000] Memory Reserved:
  10. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  11. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  12. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  13. [ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
  14. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  15. [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  16. [ 0.000000] On node 0 totalpages: 262144
  17. [ 0.000000] free_area_init_node: node 0, pgdat c0822cc0, node_mem_map d0000000
  18. [ 0.000000] DMA zone: 512 pages used for memmap
  19. [ 0.000000] DMA zone: 0 pages reserved
  20. [ 0.000000] DMA zone: 65024 pages, LIFO batch:15
  21. [ 0.000000] Normal zone: 1008 pages used for memmap
  22. [ 0.000000] Normal zone: 128016 pages, LIFO batch:31
  23. [ 0.000000] HighMem zone: 528 pages used for memmap
  24. [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
  25. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7552 r8192 d12928 u32768
  26. [ 0.000000] pcpu-alloc: s7552 r8192 d12928 u32768 alloc=8*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  29. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10
  30. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  31. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  32. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  33. [ 0.000000] allocated 2097152 bytes of page_cgroup
  34. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  35. [ 0.000000] Memory: 1024MB = 1024MB total
  36. [ 0.000000] Memory: 897128k/897128k available, 151448k reserved, 270336K highmem
  37. [ 0.000000] Virtual kernel memory layout:
  38. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  39. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  40. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  41. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  42. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  43. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  44. [ 0.000000] .text : 0xc0008000 - 0xc078f694 (7710 kB)
  45. [ 0.000000] .init : 0xc0790000 - 0xc07d1d80 ( 264 kB)
  46. [ 0.000000] .data : 0xc07d2000 - 0xc0829cf0 ( 352 kB)
  47. [ 0.000000] .bss : 0xc0829d14 - 0xc08f6cd8 ( 820 kB)
  48. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  49. [ 0.000000] Preemptible hierarchical RCU implementation.
  50. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  51. [ 0.000000] Additional per-CPU info printed with stalls.
  52. [ 0.000000] NR_IRQS:192
  53. [ 0.000000] Architected local timer running at 24.00MHz.
  54. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  55. [ 0.000000] start_kernel(): bug: interrupts were enabled early
  56. [ 0.000000] Console: colour dummy device 80x30
  57. [ 0.010896] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
  58. [ 0.076004] pid_max: default: 32768 minimum: 301
  59. [ 0.079185] Security Framework initialized
  60. [ 0.082340] AppArmor: AppArmor initialized
  61. [ 0.085899] Mount-cache hash table entries: 512
  62. [ 0.090141] Initializing cgroup subsys cpuacct
  63. [ 0.093503] Initializing cgroup subsys memory
  64. [ 0.096929] Initializing cgroup subsys devices
  65. [ 0.100328] Initializing cgroup subsys freezer
  66. [ 0.103567] Initializing cgroup subsys blkio
  67. [ 0.107245] Initializing cgroup subsys perf_event
  68. [ 0.110817] CPU: Testing write buffer coherency: ok
  69. [ 0.116041] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  70. [ 0.123120] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  71. [ 0.128658] Setting up static identity map for 0x4053ae18 - 0x4053ae70
  72. [ 0.244697] CPU1: Booted secondary processor
  73. [ 0.303576] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  74. [ 0.305590] Brought up 2 CPUs
  75. [ 0.310900] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
  76. [ 0.314094] devtmpfs: initialized
  77. [ 0.319599] dummy:
  78. [ 0.323290] NET: Registered protocol family 16
  79. [ 0.329475] DMA: preallocated 256 KiB pool for atomic coherent allocations
  80. [ 0.337059] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  81. [ 0.341884] hw-breakpoint: maximum watchpoint size is 8 bytes.
  82. [ 0.345038] [ccu-inf] aw clock manager init
  83. [ 0.347308] [ccu-inf] aw_ccu_init
  84. [ 0.351285] [ccu-inf] script config pll3 to 297MHz
  85. [ 0.355035] [ccu-inf] script config pll4 to 300MHz
  86. [ 0.358784] [ccu-inf] script config pll6 to 600MHz
  87. [ 0.362548] [ccu-inf] script config pll7 to 297MHz
  88. [ 0.366295] [ccu-inf] script config pll8 to 336MHz
  89. [ 0.369048] Init eGon pin module V2.0
  90. [ 0.376844] bio: create slab <bio-0> at 0
  91. [ 0.380290] SCSI subsystem initialized
  92. [ 0.383183] libata version 3.00 loaded.
  93. [ 0.387841] usbcore: registered new interface driver usbfs
  94. [ 0.392164] usbcore: registered new interface driver hub
  95. [ 0.396348] usbcore: registered new device driver usb
  96. [ 0.399445] Linux media interface: v0.10
  97. [ 0.403051] Linux video capture interface: v2.00
  98. [ 0.408642] Advanced Linux Sound Architecture Driver Version 1.0.25.
  99. [ 0.414815] cfg80211: Calling CRDA to update world regulatory domain
  100. [ 0.419293] Switching to clocksource arch_sys_counter
  101. [ 0.421419] FS-Cache: Loaded
  102. [ 0.423596] CacheFiles: Loaded
  103. [ 0.427433] AppArmor: AppArmor Filesystem Enabled
  104. [ 0.437673] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  105. [ 0.441699] [sw_hcd0]: usb host driver initialize........
  106. [ 0.445886] [sw_hcd0]: open_usb_clock
  107. [ 0.470152] [sw_hcd0]: host_init_state = 1
  108. [ 0.471136] [sw_hcd0]: platform is usb host
  109. [ 0.474045] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  110. [ 0.485233] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70
  111. [ 0.497771] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  112. [ 0.504472] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  113. [ 0.507930] hub 1-0:1.0: USB hub found
  114. [ 0.510825] hub 1-0:1.0: 1 port detected
  115. [ 0.514714] wrn: hcd is not enable, need not start hcd
  116. [ 0.516073] [sw_hcd0]: sw_usb_host0_disable start
  117. [ 0.522087] -------sw_hcd0_soft_disconnect---------
  118. [ 0.525054] is_on = 0, hcd0_set_vbus_cnt = 0
  119. [ 0.528105] [sw_hcd_host0]: Set USB Power Off
  120. [ 0.531850] wrn: hcd is not enable, need not stop hcd
  121. [ 0.532876] [sw_hcd0]: close_usb_clock
  122. [ 0.535336] [sw_hcd0]: sw_usb_host0_disable end
  123. [ 0.538517] [sw_udc]: udc_init: version 20080411
  124. [ 0.545057] NET: Registered protocol family 2
  125. [ 0.562081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  126. [ 0.569025] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  127. [ 0.576716] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  128. [ 0.583366] TCP: Hash tables configured (established 131072 bind 65536)
  129. [ 0.585571] TCP: reno registered
  130. [ 0.590449] UDP hash table entries: 512 (order: 2, 16384 bytes)
  131. [ 0.595799] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  132. [ 0.599407] NET: Registered protocol family 1
  133. [ 0.604744] RPC: Registered named UNIX socket transport module.
  134. [ 0.608407] RPC: Registered udp transport module.
  135. [ 0.612063] RPC: Registered tcp transport module.
  136. [ 0.617545] RPC: Registered tcp NFSv4.1 backchannel transport module.
  137. [ 0.623018] audit: initializing netlink socket (disabled)
  138. [ 0.626782] type=2000 audit(0.600:1): initialized
  139. [ 0.631170] highmem bounce pool size: 64 pages
  140. [ 0.642924] VFS: Disk quotas dquot_6.5.2
  141. [ 0.648398] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  142. [ 0.655201] NFS: Registering the id_resolver key type
  143. [ 0.659828] NTFS driver 2.1.30 [Flags: R/W].
  144. [ 0.663197] fuse init (API version 7.18)
  145. [ 0.666682] msgmni has been set to 1224
  146. [ 0.674414] alg: No test for stdrng (krng)
  147. [ 0.681152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  148. [ 0.684066] io scheduler noop registered
  149. [ 0.687291] io scheduler deadline registered
  150. [ 0.690983] io scheduler cfq registered (default)
  151. [ 0.693804] hdmi_cec: bus registered
  152. [ 0.699363] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  153. [ 0.704054] [uart]: used uart info.: 0x1d
  154. [ 0.708744] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  155. [ 0.735105] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  156. [ 1.361989] console [ttyS0] enabled
  157. [ 1.370370] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  158. [ 1.402275] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  159. [ 1.414096] [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
  160. [ 1.445947] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
  161. [ 1.457748] [uart]: serial probe 4 irq 49 mapbase 0x01c29000
  162. [ 1.489597] sunxi-uart.4: ttyS3 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
  163. [ 1.499109] G2D: drv_g2d_init
  164. [ 1.503813] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  165. [ 1.512801] G2D: head:c9000000,tail:ca000000
  166. [ 1.520401] G2D: Module initialized.major:250
  167. [ 1.527768] brd: module loaded
  168. [ 1.536528] loop: module loaded
  169. [ 1.541990] nand driver is disabled
  170. [ 1.548362] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  171. [ 1.559616] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  172. [ 1.572382] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  173. [ 1.587264] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  174. [ 1.598128] scsi0 : sw_ahci_platform
  175. [ 1.608911] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  176. [ 1.621441] [spi-inf] Found 2 spi devices in config files
  177. [ 1.633630] [spi-inf] boards num modalias max_spd_hz bus_num cs mode
  178. [ 1.645211] [spi-inf] spi_board0 irq gpio not used
  179. [ 1.656954] [spi-inf] 0 spidev 1000000 2 0 0x3
  180. [ 1.668705] [spi-inf] spi_board1 irq gpio not used
  181. [ 1.680445] [spi-inf] 1 spidev 1000000 1 0 0x3
  182. [ 1.697909] spi: cannot find any using configuration for all 4 spi controllers, return directly!
  183. [ 1.712968] emac_init fetch emac using configuration failed
  184. [ 1.720983] emac driver is disabled
  185. [ 1.727693] PPP generic driver version 2.4.2
  186. [ 1.735851] PPP BSD Compression module registered
  187. [ 1.744573] PPP Deflate Compression module registered
  188. [ 1.754573] PPP MPPE Compression module registered
  189. [ 1.762788] NET: Registered protocol family 24
  190. [ 1.773178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  191. [ 1.784955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  192. [ 1.793588] [sw-ehci1]: open clock
  193. [ 1.816266] [sw-ehci1]: Set USB Power ON
  194. [ 1.822704] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  195. [ 1.836433] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  196. [ 1.847875] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  197. [ 1.873714] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  198. [ 1.882469] hub 2-0:1.0: USB hub found
  199. [ 1.889105] hub 2-0:1.0: 1 port detected
  200. [ 1.895640] [sw-ohci1]: open clock
  201. [ 1.921782] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  202. [ 1.935119] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  203. [ 1.946470] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  204. [ 1.963729] ata1: SATA link down (SStatus 0 SControl 300)
  205. [ 2.016675] hub 3-0:1.0: USB hub found
  206. [ 2.023351] hub 3-0:1.0: 1 port detected
  207. [ 2.029842] [sw-ehci2]: open clock
  208. [ 2.052530] [sw-ehci2]: Set USB Power ON
  209. [ 2.058964] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  210. [ 2.072707] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  211. [ 2.084164] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  212. [ 2.113720] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  213. [ 2.122490] hub 4-0:1.0: USB hub found
  214. [ 2.129121] hub 4-0:1.0: 1 port detected
  215. [ 2.135626] [sw-ohci2]: open clock
  216. [ 2.161771] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  217. [ 2.175143] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  218. [ 2.186500] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  219. [ 2.256639] hub 5-0:1.0: USB hub found
  220. [ 2.263310] hub 5-0:1.0: 1 port detected
  221. [ 2.272333] mousedev: PS/2 mouse device common for all mice
  222. [ 2.283496] ===========================hv_keypad_init=====================
  223. [ 2.286908] ========HV Inital ===================
  224. [ 2.290833] tkey_fetch_sysconfig_para: tkey_unused.
  225. [ 2.303007] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  226. [ 2.308028] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
  227. [ 2.318985] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  228. [ 2.327601] i2c /dev entries driver
  229. [ 2.334801] config i2c gpio with gpio_config api
  230. [ 2.340464] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  231. [ 2.351605] axp_mfd 0-0034: AXP internal temperature monitoring enabled
  232. [ 2.362827] i2c i2c-0: Invalid probe address 0x00
  233. [ 2.370686] I2C: i2c-0: AW16XX I2C adapter
  234. [ 2.378200] config i2c gpio with gpio_config api
  235. [ 2.382163] i2c i2c-1: Invalid probe address 0x00
  236. [ 2.389940] I2C: i2c-1: AW16XX I2C adapter
  237. [ 2.397412] config i2c gpio with gpio_config api
  238. [ 2.401333] i2c i2c-2: Invalid probe address 0x00
  239. [ 2.409107] I2C: i2c-2: AW16XX I2C adapter
  240. [ 2.414993] [ace_drv] start!!!
  241. [ 2.417348] [ace_drv] init end!!!
  242. [ 2.419014] [pa_drv] start!!!
  243. [ 2.421218] [pa_drv] init end!!!
  244. [ 2.423568] axp20_ldo1: 1300 mV
  245. [ 2.432040] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  246. [ 2.442160] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  247. [ 2.452272] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  248. [ 2.462662] axp20_buck2: 700 <--> 2275 mV at 1450 mV
  249. [ 2.474214] somebody is trying to set dcdc3 range to (1300000, 1300000) uV
  250. [ 2.486117] but we keep dcdc3 = 1250000 uV from the bootloader
  251. [ 2.496199] axp20_buck3: 700 <--> 3500 mV at 1250 mV
  252. [ 2.506098] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  253. [ 2.520871] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
  254. [ 2.549047] axp20_ldo2: Failed to create debugfs directory
  255. [ 2.558599] cpuidle: using governor ladder
  256. [ 2.565599] cpuidle: using governor menu
  257. [ 2.571845] [mmc-msg] sw_mci_init
  258. [ 2.580909] [mmc-msg] MMC host used card: 0x5, boot card: 0x5, io_card 0
  259. [ 2.592881] [mmc-msg] sdc0 set round clock 400000, src 24000000
  260. [ 2.607084] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  261. [ 2.625113] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  262. [ 2.641213] [mmc-msg] sdc0 Probe: base:0xf014a000 irq:64 sg_cpu:f014c000(4fc00000) ret 0.
  263. [ 2.651848] [mmc-msg] sdc0 power on
  264. [ 2.661371] [mmc-msg] sdc2 set round clock 400000, src 24000000
  265. [ 2.675531] [mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  266. [ 2.692950] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  267. [ 2.710503] [mmc-msg] sdc2 Probe: base:0xf014e000 irq:66 sg_cpu:f0150000(4fc01000) ret 0.
  268. [ 2.723573] [mmc-msg] sdc0 set round clock 400000, src 24000000
  269. [ 2.734079] [mmc_pm]: failed to fetch sdio card configuration!
  270. [ 2.736441] sunxi_leds driver init
  271. [ 2.743975] Registered led device: green:ph02:led1
  272. [ 2.748999] ledtrig-cpu: registered to indicate activity on CPUs
  273. [ 2.760174] usbcore: registered new interface driver usbhid
  274. [ 2.768549] usbhid: USB HID core driver
  275. [ 2.777963] IPv4 over IPv4 tunneling driver
  276. [ 2.785163] TCP: cubic registered
  277. [ 2.791696] Initializing XFRM netlink socket
  278. [ 2.799457] NET: Registered protocol family 17
  279. [ 2.807356] NET: Registered protocol family 15
  280. [ 2.816517] [mmc_pm]: No sdio card, please check your config !!
  281. [ 2.820221] Registering the dns_resolver key type
  282. [ 2.828261] [mmc-err] smc 0 err, cmd 52, RTO
  283. [ 2.834614] VFP support v0.3:
  284. [ 2.840808] [mmc-err] smc 0 err, cmd 52, RTO
  285. [ 2.853713] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  286. [ 2.867913] implementor 41 architecture 2 part 30 variant 7 rev 4
  287. [ 2.871679] Registering SWP/SWPB emulation handler
  288. [ 2.882104] axp20_buck2: Failed to create debugfs directory
  289. [ 2.897047] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  290. [ 2.912572] [cpu_freq] INF:-------------------V-F Table-------------------
  291. [ 2.925437] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  292. [ 2.936598] [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  293. [ 2.945921] [mmc-err] smc 0 err, cmd 5, RTO
  294. [ 2.955250] [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  295. [ 2.964571] [mmc-err] smc 0 err, cmd 5, RTO
  296. [ 2.973888] [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  297. [ 2.983210] [mmc-err] smc 0 err, cmd 5, RTO
  298. [ 2.992527] [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  299. [ 3.001848] [mmc-err] smc 0 err, cmd 5, RTO
  300. [ 3.011182] [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  301. [ 3.022338] [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  302. [ 3.036800] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  303. [ 3.051238] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  304. [ 3.063158] [cpu_freq] INF:-----------------------------------------------
  305. [ 3.078424] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  306. [ 3.097639] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 720MHz
  307. [ 3.119243] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  308. [ 3.132095] registered taskstats version 1
  309. [ 3.141273] axp20_buck3: incomplete constraints, leaving on
  310. [ 3.152505] axp20_buck2: incomplete constraints, leaving on
  311. [ 3.162792] axp20_ldo4: incomplete constraints, leaving on
  312. [ 3.172985] axp20_ldo3: incomplete constraints, leaving on
  313. [ 3.183170] axp20_ldo2: incomplete constraints, leaving on
  314. [ 3.193330] axp20_ldo1: incomplete constraints, leaving on
  315. [ 3.201773] console [netcon0] enabled
  316. [ 3.208953] netconsole: network logging started
  317. [ 3.221023] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  318. [ 3.231589] ALSA device list:
  319. [ 3.237629] #0: sunxi-CODEC Audio Codec
  320. [ 3.246342] Waiting for root device /dev/mmcblk0p2...
  321. [ 3.269312] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  322. [ 3.287057] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  323. [ 3.301697] [mmc-msg] sdc0 set round clock 42857143, src 600000000
  324. [ 3.367869] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  325. [ 3.381622] mmc0: new high speed SD card at address 59b4
  326. [ 3.390823] mmcblk0: mmc0:59b4 USD 1.87 GiB
  327. [ 3.398744] mmcblk0: p1 p2
  328. [ 3.410272] [mmc-msg] sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  329. [ 3.421868] [mmc-msg] sdc2 power on
  330. [ 3.447712] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  331. [ 3.462041] [mmc-msg] sdc2 set round clock 400000, src 24000000
  332. [ 3.478327] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  333. [ 3.496449] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  334. [ 3.524964] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  335. [ 3.538133] VFS: Mounted root (ext4 filesystem) on device 179:2.
  336. [ 3.547464] [mmc-err] smc 2 err, cmd 52, RTO
  337. [ 3.555972] [mmc-err] smc 2 err, cmd 52, RTO
  338. [ 3.568788] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  339. [ 3.589768] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  340. [ 3.602129] devtmpfs: mounted
  341. [ 3.608148] Freeing init memory: 260K
  342. [ 3.616570] [mmc-err] smc 2 err, cmd 8, RTO
  343. [ 3.624933] [mmc-err] smc 2 err, cmd 5, RTO
  344. [ 3.633272] [mmc-err] smc 2 err, cmd 5, RTO
  345. [ 3.641590] [mmc-err] smc 2 err, cmd 5, RTO
  346. [ 3.649950] [mmc-err] smc 2 err, cmd 5, RTO
  347. [ 3.658401] [mmc-err] smc 2 err, cmd 55, RTO
  348. [ 3.666966] [mmc-err] smc 2 err, cmd 55, RTO
  349. [ 3.675524] [mmc-err] smc 2 err, cmd 55, RTO
  350. [ 3.684046] [mmc-err] smc 2 err, cmd 55, RTO
  351. [ 3.696769] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  352. [ 3.715589] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  353. [ 3.733431] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  354. [ 3.751455] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  355. [ 3.772786] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  356. [ 3.808992] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  357. [ 3.840728] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  358. [ 3.859197] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  359. [ 3.874044] [mmc-msg] sdc2 set round clock 42857143, src 600000000
  360. [ 3.944233] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  361. [ 3.958125] [mmc-err] smc 2 err, cmd 8, EBE
  362. [ 3.965652] [mmc-err] In data read operation
  363. [ 3.974975] [mmc-msg] found data error, need to send stop command
  364. [ 3.984991] [mmc-err] sdc 2 send stop command failed
  365. [ 3.998564] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing MMC-HS(SDR20) dt B
  366. [ 4.013551] mmc1: new high speed MMC card at address 0001
  367. [ 4.023328] mmcblk1: mmc1:0001 AGUF4R 14.5 GiB
  368. [ 4.033556] mmcblk1boot0: mmc1:0001 AGUF4R partition 1 31.8 MiB
  369. [ 4.045140] mmcblk1boot1: mmc1:0001 AGUF4R partition 2 31.8 MiB
  370. [ 4.054473] mmcblk1: p1 p2
  371. [ 4.066651] Dev Sunxi softw311 mmcblk1boot1 magic does not match for MBR 1:
  372. [ 4.081330] Dev Sunxi softw311 mmcblk1boot1 magic does not match for MBR 2:
  373. [ 4.096037] Dev Sunxi softw311 mmcblk1boot1 magic does not match for MBR 3:
  374. [ 4.110717] Dev Sunxi softw311 mmcblk1boot1 magic does not match for MBR 4:
  375. [ 4.127027] Dev Sunxi softw311 mmcblk1boot1 header bad for all MBR copies, MBR corrupted or not present.
  376. [ 4.143376] Dev Sunxi softw411 mmcblk1boot1 magic does not match for MBR 1:
  377. [ 4.158569] Dev Sunxi softw411 mmcblk1boot1 magic does not match for MBR 2:
  378. [ 4.173656] Dev Sunxi softw411 mmcblk1boot1 magic does not match for MBR 3:
  379. [ 4.188747] Dev Sunxi softw411 mmcblk1boot1 magic does not match for MBR 4:
  380. [ 4.205031] Dev Sunxi softw411 mmcblk1boot1 header bad for all MBR copies, MBR corrupted or not present.
  381. [ 4.218304] mmcblk1boot1: unknown partition table
  382. [ 4.231875] Dev Sunxi softw311 mmcblk1boot0 magic does not match for MBR 1:
  383. [ 4.246565] Dev Sunxi softw311 mmcblk1boot0 magic does not match for MBR 2:
  384. [ 4.261266] Dev Sunxi softw311 mmcblk1boot0 magic does not match for MBR 3:
  385. [ 4.275918] Dev Sunxi softw311 mmcblk1boot0 magic does not match for MBR 4:
  386. [ 4.292178] Dev Sunxi softw311 mmcblk1boot0 header bad for all MBR copies, MBR corrupted or not present.
  387. [ 4.308451] Dev Sunxi softw411 mmcblk1boot0 magic does not match for MBR 1:
  388. [ 4.323568] Dev Sunxi softw411 mmcblk1boot0 magic does not match for MBR 2:
  389. [ 4.338674] Dev Sunxi softw411 mmcblk1boot0 magic does not match for MBR 3:
  390. [ 4.353820] Dev Sunxi softw411 mmcblk1boot0 magic does not match for MBR 4:
  391. [ 4.370149] Dev Sunxi softw411 mmcblk1boot0 header bad for all MBR copies, MBR corrupted or not present.
  392. [ 4.383453] mmcblk1boot0: unknown partition table
  393. [ 4.442106] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  394. [ 4.459862] systemd[1]: Detected architecture 'arm'.
  395. [ 4.528529] systemd[1]: Failed to insert module 'ipv6'
  396. [ 4.539679] systemd[1]: Set hostname to <A20-OLinuXino>.
  397. [ 4.865449] systemd[1]: Expecting device dev-ttyS0.device...
  398. [ 4.896247] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  399. [ 4.910893] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  400. [ 4.923188] systemd[1]: Starting Remote File Systems (Pre).
  401. [ 4.954627] systemd[1]: Reached target Remote File Systems (Pre).
  402. [ 4.968717] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  403. [ 5.007949] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  404. [ 5.021421] systemd[1]: Starting Encrypted Volumes.
  405. [ 5.053922] systemd[1]: Reached target Encrypted Volumes.
  406. [ 5.066546] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  407. [ 5.081842] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  408. [ 5.092726] systemd[1]: Starting Paths.
  409. [ 5.113419] systemd[1]: Reached target Paths.
  410. [ 5.120634] systemd[1]: Starting Swap.
  411. [ 5.142782] systemd[1]: Reached target Swap.
  412. [ 5.150430] systemd[1]: Starting Root Slice.
  413. [ 5.173218] systemd[1]: Created slice Root Slice.
  414. [ 5.182335] systemd[1]: Starting User and Session Slice.
  415. [ 5.214263] systemd[1]: Created slice User and Session Slice.
  416. [ 5.225751] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  417. [ 5.255484] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  418. [ 5.266989] systemd[1]: Starting Delayed Shutdown Socket.
  419. [ 5.294269] systemd[1]: Listening on Delayed Shutdown Socket.
  420. [ 5.304720] systemd[1]: Starting Journal Socket (/dev/log).
  421. [ 5.334451] systemd[1]: Listening on Journal Socket (/dev/log).
  422. [ 5.344595] systemd[1]: Starting udev Control Socket.
  423. [ 5.373926] systemd[1]: Listening on udev Control Socket.
  424. [ 5.383456] systemd[1]: Starting udev Kernel Socket.
  425. [ 5.413835] systemd[1]: Listening on udev Kernel Socket.
  426. [ 5.422908] systemd[1]: Starting Journal Socket.
  427. [ 5.453501] systemd[1]: Listening on Journal Socket.
  428. [ 5.462118] systemd[1]: Starting System Slice.
  429. [ 5.483416] systemd[1]: Created slice System Slice.
  430. [ 5.492412] systemd[1]: Starting system-getty.slice.
  431. [ 5.523931] systemd[1]: Created slice system-getty.slice.
  432. [ 5.534306] systemd[1]: Starting system-serial\x2dgetty.slice.
  433. [ 5.564808] systemd[1]: Created slice system-serial\x2dgetty.slice.
  434. [ 5.576516] systemd[1]: Starting Increase datagram queue length...
  435. [ 5.634541] systemd[1]: Mounted Huge Pages File System.
  436. [ 5.644983] systemd[1]: Starting udev Coldplug all Devices...
  437. [ 6.085345] systemd[1]: Mounted POSIX Message Queue File System.
  438. [ 6.099885] systemd[1]: Started Set Up Additional Binary Formats.
  439. [ 6.133853] systemd[1]: Starting Load Kernel Modules...
  440. [ 6.478912] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  441. [ 6.524611] systemd[1]: Mounting Debug File System...
  442. [ 6.562912] systemd[1]: Starting Slices.
  443. [ 6.593188] systemd[1]: Reached target Slices.
  444. [ 6.603596] systemd[1]: Expecting device dev-mmcblk0p1.device...
  445. [ 6.654616] systemd[1]: Started Increase datagram queue length.
  446. [ 6.727829] systemd[1]: Started Create list of required static device nodes for the current kernel.
  447. [ 6.764053] systemd[1]: Mounted Debug File System.
  448. [ 6.787856] sunxi disp driver loaded (/dev/disp api 1.0)
  449. [ 6.797962] systemd[1]: Started udev Coldplug all Devices.
  450. [ 6.812874] systemd[1]: Starting Create Static Device Nodes in /dev...
  451. [ 6.884512] systemd[1]: Starting Syslog Socket.
  452. [ 6.913543] systemd[1]: Listening on Syslog Socket.
  453. [ 6.922695] systemd[1]: Starting Journal Service...
  454. [ 6.973494] systemd[1]: Started Journal Service.
  455. [ 7.082873] systemd-udevd[84]: starting version 215
  456. [ 8.155772] Console: switching to colour frame buffer device 128x37
  457. [ 8.219140] I2C: i2c-3: HDMI I2C adapter
  458. [ 8.282580] UMP<2>: Inserting UMP device driver. Compiled: May 16 2018, time: 12:47:55
  459. [ 8.295462] UMP<2>: Using OS memory backend, allocation limit: 134217728
  460. [ 8.301893] UMP: UMP device driver loaded
  461. [ 8.414944] eth%d: device MAC address b6:54:de:a3:be:7b
  462. [ 8.430393] [gmac]: sun6i_gmac platform driver registration completed
  463. [ 8.521362] systemd-journald[83]: Received request to flush runtime journal from PID 1
  464. [ 8.650141] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432)
  465. [ 8.660517] mali: use config clk_div 1
  466. [ 8.667024] mali: clk_div 1
  467. [ 8.670453] Mali: mali clock set completed, clock is 312000000 Hz
  468. [ 8.677865] mali: use config clk_div 1
  469. [ 8.683551] mali: clk_div 1
  470. [ 8.686911] Mali: mali clock set completed, clock is 312000000 Hz
  471. [ 8.694305] Mali: Mali device driver loaded
  472. [ 8.708820] rtp_used == 1.
  473. [ 8.712725] sun4i-ts: tp_press_threshold_enable is 0.
  474. [ 8.716074] sun4i-ts: rtp_sensitive_level is 15.
  475. [ 8.719472] sun4i-ts: rtp_exchange_x_y_flag is 0.
  476. [ 8.726494] input: sun4i-ts as /devices/platform/sun4i-ts/input/input1
  477. [ 8.753840] [cedar dev]: install start!!!
  478. [ 8.765514] [cedar dev]: install end!!!
  479. [ 8.783160] sunxi_gpio driver init ver 1.3
  480. [ 8.794211] gpiochip_add: registered GPIOs 1 to 64 on device: A1X_GPIO
  481. [ 8.818859] input: sun4i-keyboard as /devices/virtual/input/input2
  482. [ 8.859398] [sw_udc]: [sw_usb_udc]: binding gadget driver 'g_ether'
  483. [ 8.864656] [sw_udc]: alloc request: ep(0xc0813da8, ep0, 64), req(0xee5c91c0)
  484. [ 8.873850] WRN:L2728(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: usb device is not active
  485. [ 8.895630] g_ether gadget: using random self ethernet address
  486. [ 8.914227] g_ether gadget: using random host ethernet address
  487. [ 8.943020] usb0: MAC 5e:20:30:0b:03:54
  488. [ 8.950107] usb0: HOST MAC 8a:ba:83:1a:e6:9c
  489. [ 8.976546] ep_matches, wrn: endpoint already claimed, ep(0xc0813df4, 0xee97d580, ep1-bulk)
  490. [ 8.983617] ep_matches, wrn: endpoint already claimed, ep(0xc0813df4, 0xee97d580, ep1-bulk)
  491. [ 9.003216] ep_matches, wrn: endpoint already claimed, ep(0xc0813e40, 0xee97d580, ep2-bulk)
  492. [ 9.010258] [sw_udc]: alloc request: ep(0xc0813e8c, ep3-bulk, 512), req(0xee764480)
  493. [ 9.022798] ep_matches, wrn: endpoint already claimed, ep(0xc0813df4, 0xee97d580, ep1-bulk)
  494. [ 9.034993] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  495. [ 9.046483] g_ether gadget: g_ether ready
  496. [ 9.057283] WRN:L2762(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: usb device is not active
  497. [ 9.088301] pwm-sunxi: pwm0 configured - period: 1000, duty_percent: 98, duty: 980
  498. [ 9.100799] pwm-sunxi: pwm1 configured - period: 10000, duty_percent: 50, duty: 5000
  499. [ 9.150772] [CSI]Welcome to CSI driver
  500. [ 9.156180] [CSI]csi_init
  501. [ 9.163234] [CSI_ERR]csi_used=0,csi driver is not enabled!
  502. [ 9.191700] ===========================ft5x_ts_init=====================
  503. [ 9.201198] ctp_fetch_sysconfig_para.
  504. [ 9.208711] ctp_fetch_sysconfig_para: ctp_unused.
  505. [ 9.215517] ft5x_ts_init: err.
  506. [ 11.153204] Warning: this sunxi disp driver will see significant redesign.
  507. [ 11.168098] Applications using /dev/disp directly will break.
  508. [ 11.180095] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
  509. [ 11.183288] [DISP] layer allocated: 0,101
  510. [ 11.228720] sunxi_gmac: probed
  511. [ 11.240088] eth0: PHY ID 00221622 at 1 IRQ 0 (sunxi_gmac-0:01) active
  512. [ 11.535402] [drm] Initialized drm 1.1.0 20060810
  513. [ 11.575672] Mali DRM initialize, driver name: mali_drm, version 2.1
  514. [ 11.593755] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  515. [ 11.606666] Mali DRM initialize, driver name: mali_drm, version 2.1
  516. [ 11.623362] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  517. [ 11.635238] UMP<2>: New session opened
  518. [ 19.207387] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  519.  
Tags: linux olimex a20
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!