[    0.815078] [TOUCH][F][COMMON] touch_init()
[    0.815088] [TOUCH][F][PLATFORM] TouchInitializePlatform()
[    0.815106] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    0.830089] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    0.940085] [TOUCH][L][MIT200] Device was reset
[    0.940097] [TOUCH][F][MIT200] MIT200_Connect()
[    0.940270] [TOUCH][E][COMMON] touch_init() line=2592 : ######## [unified_driver,ver2] ##########
[    0.940724] [TOUCH][F][COMMON] touch_probe()
[    0.940736] [TOUCH][L][COMMON] STATE = BOOT
[    0.940745] [TOUCH][L][MODEL] ======== Model Configuration ( Begin ) ========
[    0.940754] [TOUCH][L][MODEL] button_support=0
[    0.940762] [TOUCH][L][MODEL] number_of_button=0
[    0.940770] [TOUCH][L][MODEL] button_name[0]=0
[    0.940778] [TOUCH][L][MODEL] button_name[1]=0
[    0.940786] [TOUCH][L][MODEL] button_name[2]=0
[    0.940795] [TOUCH][L][MODEL] button_name[3]=0
[    0.940803] [TOUCH][L][MODEL] max_x=480
[    0.940811] [TOUCH][L][MODEL] max_y=854
[    0.940819] [TOUCH][L][MODEL] max_pressure=255
[    0.940827] [TOUCH][L][MODEL] max_width=30
[    0.940835] [TOUCH][L][MODEL] max_orientation=1
[    0.940844] [TOUCH][L][MODEL] max_id=10
[    0.940852] [TOUCH][L][MODEL] protocol_type=MT_PROTOCOL_B
[    0.940860] [TOUCH][L][MODEL] ======== Model Configuration ( End ) ========
[    0.940869] [TOUCH][F][COMMON] register_input_dev()
[    0.941116] input: touch_dev as /devices/virtual/input/input1
[    0.941343] [TOUCH][F][COMMON] sysfs_register()
[    0.941639] [TOUCH][F][MIT200] MIT200_Initialize()
[    0.941651] [TOUCH][F][MIT200] mip_dev_create()
[    0.942448] [TOUCH][F][MIT200] MIT200_ReadIcFirmwareInfo()
[    0.942683] [TOUCH][L][MIT200] IC F/W Version = v1.01 ( Official Release )
[    0.942695] [TOUCH][F][MIT200] MIT200_GetBinFirmwareInfo()
[    0.942704] [TOUCH][L][MIT200] Firmware filename = melfas/m1_spr_us/fw.bin
[    0.942719] [TOUCH][L][MIT200] BIN F/W Version = v1.01 ( Official Release )
[    0.942729] [TOUCH][L][COMMON] [touch_probe] pDriverData->bootMode != BOOT_OFF_CHARGING
[    0.942737] [TOUCH][L][COMMON] TouchIrqHandler will be Registered
[    0.942745] [TOUCH][F][PLATFORM] TouchRegisterIrq()
[    0.942834] [TOUCH][L][COMMON] STATE = NORMAL
[    0.943012] [TOUCH][L][MIT200] [MIT200_lpwg_debug_enable_set_status] lpwg_debug_enable status = 0
[    0.943014] [TOUCH][L][PLATFORM] Interrupt Disabled
[    0.943021] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    0.943034] [TOUCH][L][COMMON] sensor_value set to 0, enable_sensor_interlock set to 1
[    0.960104] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    1.070081] [TOUCH][L][MIT200] Device was reset
[    1.070255] [TOUCH][L][COMMON] STATE = NORMAL
[    1.070270] [TOUCH][L][PLATFORM] Interrupt Enabled
[    2.391656] [TOUCH][F][COMMON] touch_fb_notifier_callback()
[    3.951585] [TOUCH][L][MIT200] ESD Detected!
[    3.951602] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[    3.951614] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[    3.951642] [TOUCH][L][PLATFORM] Interrupt Disabled
[    3.951654] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    3.970144] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    4.080274] [TOUCH][L][MIT200] Device was reset
[    4.080538] [TOUCH][L][COMMON] STATE = NORMAL
[    4.080557] [TOUCH][L][PLATFORM] Interrupt Enabled
[    5.005920] [TOUCH][L][MIT200] ESD Detected!
[    5.005938] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[    5.005950] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[    5.005978] [TOUCH][L][PLATFORM] Interrupt Disabled
[    5.005990] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    5.020109] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    5.130122] [TOUCH][L][MIT200] Device was reset
[    5.130319] [TOUCH][L][COMMON] STATE = NORMAL
[    5.130335] [TOUCH][L][PLATFORM] Interrupt Enabled
[    6.060156] [TOUCH][L][MIT200] ESD Detected!
[    6.060174] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[    6.060187] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[    6.060215] [TOUCH][L][PLATFORM] Interrupt Disabled
[    6.060227] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    6.080101] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    6.190134] [TOUCH][L][MIT200] Device was reset
[    6.190345] [TOUCH][L][COMMON] STATE = NORMAL
[    6.190364] [TOUCH][L][PLATFORM] Interrupt Enabled
[    7.114531] [TOUCH][L][MIT200] ESD Detected!
[    7.114549] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[    7.114560] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[    7.114589] [TOUCH][L][PLATFORM] Interrupt Disabled
[    7.114601] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    7.130147] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    7.240128] [TOUCH][L][MIT200] Device was reset
[    7.240329] [TOUCH][L][COMMON] STATE = NORMAL
[    7.240346] [TOUCH][L][PLATFORM] Interrupt Enabled
[    8.169048] [TOUCH][L][MIT200] ESD Detected!
[    8.169061] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[    8.169071] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[    8.169099] [TOUCH][L][PLATFORM] Interrupt Disabled
[    8.169110] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    8.180205] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    8.290114] [TOUCH][L][MIT200] Device was reset
[    8.290415] [TOUCH][L][COMMON] STATE = NORMAL
[    8.290431] [TOUCH][L][PLATFORM] Interrupt Enabled
[    9.223485] [TOUCH][L][MIT200] ESD Detected!
[    9.223498] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[    9.223507] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[    9.223529] [TOUCH][L][PLATFORM] Interrupt Disabled
[    9.223540] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[    9.240077] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[    9.350163] [TOUCH][L][MIT200] Device was reset
[    9.350330] [TOUCH][L][COMMON] STATE = NORMAL
[    9.350343] [TOUCH][L][PLATFORM] Interrupt Enabled
[   10.277878] [TOUCH][L][MIT200] ESD Detected!
[   10.277888] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[   10.277898] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[   10.277919] [TOUCH][L][PLATFORM] Interrupt Disabled
[   10.277928] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[   10.290127] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH
[   10.400110] [TOUCH][L][MIT200] Device was reset
[   10.400273] [TOUCH][L][COMMON] STATE = NORMAL
[   10.400285] [TOUCH][L][PLATFORM] Interrupt Enabled
[   11.332511] [TOUCH][L][MIT200] ESD Detected!
[   11.332524] [TOUCH][L][COMMON] WqTouchIrqHandler : goto error !!!
[   11.332534] [TOUCH][E][COMMON] WqTouchIrqHandler() line=702 : Abnormal IC status. Touch IC will be reset
[   11.332567] [TOUCH][L][PLATFORM] Interrupt Disabled
[   11.332578] [TOUCH][L][PLATFORM] Reset Pin was set to LOW
[   11.350157] [TOUCH][L][PLATFORM] Reset Pin was set to HIGH