Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-100-generic] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST2000DM001-9YN164
- Serial Number: S1E09Z0A
- LU WWN Device Id: 5 000c50 03cbd8f23
- Firmware Version: CC4H
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Jul 22 13:01:39 2019 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 575) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 220) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 15180840
- 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 20
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 281824715
- 9 Power_On_Hours 0x0032 046 046 000 Old_age Always - 47817
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 20
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
- 187 Reported_Uncorrect 0x0032 015 015 000 Old_age Always - 85
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
- 189 High_Fly_Writes 0x003a 032 032 000 Old_age Always - 68
- 190 Airflow_Temperature_Cel 0x0022 075 069 045 Old_age Always - 25 (Min/Max 21/31)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 19
- 193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 23850
- 194 Temperature_Celsius 0x0022 025 040 000 Old_age Always - 25 (0 17 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 47195h+04m+49.628s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3601656018081
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 131127348895444
- SMART Error Log Version: 1
- ATA Error Count: 51 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 51 occurred at disk power-on lifetime: 47508 hours (1979 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 68 ff ff ff 4f 00 15d+20:13:45.664 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 15d+20:13:45.664 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 15d+20:13:45.664 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 15d+20:13:45.664 READ FPDMA QUEUED
- 60 00 80 ff ff ff 4f 00 15d+20:13:45.664 READ FPDMA QUEUED
- Error 50 occurred at disk power-on lifetime: 47508 hours (1979 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 08 ff ff ff 4f 00 15d+20:13:42.635 WRITE FPDMA QUEUED
- 60 00 d0 ff ff ff 4f 00 15d+20:13:42.624 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 15d+20:13:42.624 READ FPDMA QUEUED
- 61 00 01 08 20 41 40 00 15d+20:13:42.545 WRITE FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 15d+20:13:42.484 READ FPDMA QUEUED
- Error 49 occurred at disk power-on lifetime: 47507 hours (1979 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 d8 ff ff ff 4f 00 15d+19:33:18.940 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 15d+19:33:18.940 READ FPDMA QUEUED
- 61 00 20 ff ff ff 4f 00 15d+19:33:18.488 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 15d+19:33:18.455 WRITE FPDMA QUEUED
- 60 00 18 ff ff ff 4f 00 15d+19:33:18.435 READ FPDMA QUEUED
- Error 48 occurred at disk power-on lifetime: 47507 hours (1979 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 08 ff ff ff 4f 00 15d+19:33:15.376 WRITE FPDMA QUEUED
- 60 00 f0 ff ff ff 4f 00 15d+19:33:15.363 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 15d+19:33:15.363 READ FPDMA QUEUED
- 61 00 01 08 20 41 40 00 15d+19:33:15.314 WRITE FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 15d+19:33:15.278 READ FPDMA QUEUED
- Error 47 occurred at disk power-on lifetime: 47505 hours (1979 days + 9 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 15d+17:00:10.097 READ FPDMA QUEUED
- 60 00 c0 ff ff ff 4f 00 15d+17:00:10.097 READ FPDMA QUEUED
- 60 00 40 ff ff ff 4f 00 15d+17:00:08.490 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 15d+17:00:08.490 READ FPDMA QUEUED
- 61 00 01 08 b8 2c 40 00 15d+17:00:08.407 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 47806 -
- # 2 Extended offline Completed without error 00% 47769 -
- # 3 Short offline Completed without error 00% 47734 -
- # 4 Short offline Completed without error 00% 47710 -
- # 5 Short offline Completed without error 00% 47686 -
- # 6 Short offline Completed without error 00% 47662 -
- # 7 Short offline Completed without error 00% 47638 -
- # 8 Extended offline Completed without error 00% 47601 -
- # 9 Short offline Completed without error 00% 47566 -
- #10 Short offline Completed without error 00% 47542 -
- #11 Short offline Completed without error 00% 47518 -
- #12 Short offline Completed without error 00% 47494 -
- #13 Short offline Completed without error 00% 47470 -
- #14 Extended offline Completed: read failure 10% 47433 3706341392
- #15 Short offline Completed without error 00% 47400 -
- #16 Short offline Completed without error 00% 47376 -
- #17 Short offline Completed without error 00% 47353 -
- #18 Short offline Completed without error 00% 47332 -
- #19 Short offline Completed without error 00% 47305 -
- #20 Extended offline Completed: read failure 90% 47254 3706346608
- #21 Short offline Completed: read failure 90% 47230 3706346608
- 3 of 3 failed self-tests are outdated by newer successful extended offline self-test # 2
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement