2018-08-30 22:15:42 * Oskar Almqvist dropped a Red Metal Toolbox. *
2018-08-30 22:15:59 ★ Oskar Almqvist opens the toolbox, proceeding to grab ahold of a socket wrench along with a ---
2018-08-30 22:16:04 ★ 15mm socket.      ((Oskar Almqvist))
2018-08-30 22:16:21 ★ Oskar Almqvist sticks the socket onto the wrench, proceeding to step towards the garage door.
2018-08-30 22:16:49 ★ Oskar Almqvist places the socket onto one of the many bolts, proceeding to crank it to the left numerous --
2018-08-30 22:17:03 ★ times; thus loosening it.      ((Oskar Almqvist))
2018-08-30 22:17:21 ★ Oskar Almqvist would then move onto each of the remaining bolts, thus freeing the door from the ---
2018-08-30 22:17:28 ★ dented track.      ((Oskar Almqvist))
2018-08-30 22:17:53 ★ Oskar Almqvist places the wrench down, proceeding to grip a hammer and small block of wood from ---
2018-08-30 22:17:56 ★ their toolbox.      ((Oskar Almqvist))
2018-08-30 22:18:13 ★ Oskar Almqvist places the block of wood between the rails, proceeding to bang on the dented edge ---
2018-08-30 22:18:36 ★ of the rail, roughly reshaping each part of the rail top back into shape.      ((Oskar Almqvist))
2018-08-30 22:18:56 ★ Oskar Almqvist grips the garage door, proceeding to slowly roll it upwards; segment by segment ---
2018-08-30 22:19:04 ★ removing the dented door from the track.      ((Oskar Almqvist))
2018-08-30 22:19:31 ★ Oskar Almqvist grips the hammer and wooden block, proceeding to place the block into another dented ---
2018-08-30 22:19:41 ★ segment of the rail; banging it back into shape.      ((Oskar Almqvist))
2018-08-30 22:20:01 ★ Oskar Almqvist would do this same action to any dented or bent segment of the track, roughly ---
2018-08-30 22:20:09 ★ straightening out the rails.      ((Oskar Almqvist))
2018-08-30 22:20:44 ★ Oskar Almqvist steps towards the garage door segments, proceeding to tap on them; banging the ---
2018-08-30 22:20:56 ★ bends and dents down; thus straightening out the door.      ((Oskar Almqvist))
2018-08-30 22:21:20 ★ Oskar Almqvist grips each segment one-by-one, feeding them back into the track; rolling them down into ---
2018-08-30 22:21:24 ★ the closed position.      ((Oskar Almqvist))
2018-08-30 22:21:55 ★ Oskar Almqvist places the wood and hammer back into the toolbox, proceeding to grip each of the 15mm ---
2018-08-30 22:22:06 ★ bolts, quickly threading them back into their holes.      ((Oskar Almqvist))
2018-08-30 22:22:22 ★ Oskar Almqvist grips the socket wrench, proceeding to swap it into the tightening mode; then quickly ---
2018-08-30 22:22:33 ★ connects the socket to each bolt, one by one tightening them down.      ((Oskar Almqvist))