Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- G12A:BL:0253b8:61aa2d;FEAT:E0F83180:2000;POC:F;RCY:0;EMMC:0;READ:0;CHK:1F;READ:0;CHK:1F;READ:0;CHK:1F;SD?:0;SD:0;READ:0;0.0
- l2_stage_init 0x01
- bl2_stage_init 0x81
- hw id: 0x0001 - pwm id 0x00
- bl2_stage_init 0xc0
- bl2_stage_init 0x02
- no sdio debug board detected
- L0:00000000
- L1:00000703
- L2:00008067
- L3:04000000
- S1:00000000
- B2:00002000
- B1:e0f83180
- TE: 451991
- BL2 Built : 15:21:48, Aug 28 2019. g12a g1bf2b53 - luan.yuan@droid15-sz
- Board ID = 2
- Set cpu clk to 24M
- Set clk81 to 24M
- CPU clk: 1200 MHz
- Set clk81 to 166.6M
- DDR driver_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 15:21:45
- board id: 2
- Load FIP HDR from SD, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
- fw parse done
- Load ddrfw from SD, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
- Load ddrfw from SD, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
- PIEI prepare done
- fastboot data load
- fastboot data verify
- verify result: 266
- Cfg max: 2, cur: 1. Board id: 255. Force loop cfg
- LPDDR4 probe
- ddr clk to 792MHz
- Load ddrfw from SD, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
- dmc_version 0000
- Check phy result
- INFO : ERROR : Training has failed!
- 1D training failed
- Cfg max: 2, cur: 2. Board id: 255. Force loop cfg
- LPDDR4 probe
- ddr clk to 792MHz
- Load ddrfw from SD, src: 0x0003c200, des: 0xfffd0000, size: 0x0000c000, part: 0
- dmc_version 0000
- Check phy result
- INFO : End of CA training
- INFO : End of initialization
- INFO : Training has run successfully!
- Check phy result
- INFO : End of initialization
- INFO : End of read enable training
- INFO : End of fine write leveling
- INFO : End of Write leveling coarse delay
- INFO : Training has run successfully!
- Check phy result
- INFO : End of initialization
- INFO : End of read dq deskew training
- INFO : End of MPR read delay center optimization
- INFO : End of write delay center optimization
- INFO : End of read delay center optimization
- INFO : End of max read latency training
- INFO : Training has run successfully!
- 1D training succeed
- Load ddrfw from SD, src: 0x00048200, des: 0xfffd0000, size: 0x0000c000, part: 0
- Check phy result
- INFO : End of initialization
- INFO : End of 2D read delay Voltage center optimization
- INFO : End of 2D read delay Voltage center optimization
- INFO : End of 2D write delay Voltage center optimization
- INFO : End of 2D write delay Voltage center optimization
- INFO : Training has run successfully!
- channel==0
- RxClkDly_Margin_A0==256 ps 13
- TxDqDly_Margin_A0==256 ps 13
- RxClkDly_Margin_A1==0 ps 0
- TxDqDly_Margin_A1==0 ps 0
- TrainedVREFDQ_A0==74
- TrainedVREFDQ_A1==0
- VrefDac_Margin_A0==32
- DeviceVref_Margin_A0==40
- VrefDac_Margin_A1==0
- DeviceVref_Margin_A1==0
- channel==1
- RxClkDly_Margin_A0==236 ps 12
- TxDqDly_Margin_A0==256 ps 13
- RxClkDly_Margin_A1==0 ps 0
- TxDqDly_Margin_A1==0 ps 0
- TrainedVREFDQ_A0==76
- TrainedVREFDQ_A1==0
- VrefDac_Margin_A0==31
- DeviceVref_Margin_A0==38
- VrefDac_Margin_A1==0
- DeviceVref_Margin_A1==0
- dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
- soc_vref_reg_value 0x 0000001b 0000001c 0000001c 0000001c 0000001a 0000001a 0000001c 0000001a 0000001a 0000001d 0000001d 0000001d 0000001d 0000001d 0000001d 0000001c 00000019 00000019 00000019 0000001a 0000001a 0000001b 00000019 0000001d 0000001a 00000019 0000001c 0000001b 0000001c 0000001a 0000001c 00000019 dram_vref_reg_value 0x 00000056
- 2D training succeed
- aml_ddr_fw_vesion: LPDDR4_PHY_V_0_1_18 build time: Aug 28 2019 13:53:31
- auto size-- 65535DDR cs0 size: 2048MB
- DDR cs1 size: 0MB
- DMC_DDR_CTRL: 00c0002cDDR size: 2048MB
- cs0 DataBus test pass
- cs0 AddrBus test pass
- 100bdlr_step_size ps== 485
- result report
- boot times 0Enable ddr reg access
- Load FIP HDR from SD, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
- Load BL3X from SD, src: 0x0006c200, des: 0x0175c000, size: 0x00098000, part: 0
- bl2z: ptr: 05129330, size: 00001e40
- 0.0;M3 CHK:0;cm4_sp_mode 0
- MVN_1=0x00000000
- MVN_2=0x00000000
- [Image: g12a_v1.1.3390-6ac5299 2019-09-26 14:09:46 luan.yuan@droid15-sz]
- OPS=0x30
- ring efuse init
- 28 0c 30 00 01 20 23 00 00 15 35 36 32 43 46 50
- [0.017149 Inits done]
- secure task start!
- high task start!
- low task start!
- run into bl31
- NOTICE: BL31: v1.3(release):4fc40b1
- NOTICE: BL31: Built : 15:57:33, May 22 2019
- NOTICE: BL31: G12A normal boot!
- NOTICE: BL31: BL33 decompress pass
- ERROR: Error initializing runtime service opteed_fast
- U-Boot 2022.01-armbian (Aug 01 2022 - 02:22:13 +0000) radxa-zero
- Model: Radxa Zero
- SoC: Amlogic Meson G12A (S905Y2) Revision 28:c (30:2)
- DRAM: 2 GiB
- MMC: sd@ffe03000: 0, sd@ffe05000: 1, mmc@ffe07000: 2
- Loading Environment from nowhere... OK
- In: serial
- Out: serial
- Err: serial
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select! : -110
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found U-Boot script /boot/boot.scr
- 8025 bytes read in 5 ms (1.5 MiB/s)
- ## Executing script at 08000000
- U-boot default fdtfile: amlogic/meson-g12a-radxa-zero.dtb
- Current variant:
- 288 bytes read in 3 ms (93.8 KiB/s)
- Current fdtfile after armbianEnv: amlogic/meson-g12a-radxa-zero.dtb
- Mainline bootargs: root=UUID=0c4035c7-f0f6-4fe6-b2c2-1eed3ae0f93e rootwait rootfstype=ext4 console=ttyAML0,115200 console=tty1 consoleblank=0 coherent_pool=2M loglevel=7 ubootpart=5768205c-01 libata.force=noncq usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1
- 12694002 bytes read in 1235 ms (9.8 MiB/s)
- 26530304 bytes read in 2579 ms (9.8 MiB/s)
- 71975 bytes read in 13 ms (5.3 MiB/s)
- 494 bytes read in 4 ms (120.1 KiB/s)
- Applying user provided DT overlay meson-g12a-i2c-ee-m3-gpioa-14-gpioa-15.dtbo
- 2458 bytes read in 5 ms (479.5 KiB/s)
- Applying user provided DT overlay meson-g12a-spi-lcd-4.0_drm_gpio.dtbo
- 796 bytes read in 5 ms (155.3 KiB/s)
- Applying user provided DT overlay meson-g12a-uart-ao-b-on-gpioao-8-gpioao-9.dtbo
- 232 bytes read in 8 ms (28.3 KiB/s)
- Applying kernel provided DT fixup script (meson-fixup.scr)
- ## Executing script at 32000000
- ## Loading init Ramdisk from Legacy Image at 13000000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 12693938 Bytes = 12.1 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 04080000
- Booting using the fdt blob at 0x4080000
- Loading Ramdisk to 3f3e4000, end 3ffff1b2 ... OK
- Loading Device Tree to 000000003f36a000, end 000000003f3e3fff ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.10.134-meson64 (root@ac4d11132eb5) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP PREEMPT Mon Aug 1 03:57:05 UTC 2022
- [ 0.000000] Machine model: Radxa Zero
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000048000000, size 896 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x47bb7100-0x47bb8fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
- [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
- [ 0.000000] node 0: [mem 0x0000000007300000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: root=UUID=0c4035c7-f0f6-4fe6-b2c2-1eed3ae0f93e rootwait rootfstype=ext4 console=ttyAML0,115200 console=tty1 consoleblank=0 coherent_pool=2M loglevel=7 ubootpart=5768205c-01 libata.force=noncq usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000] Memory: 1064148K/2097152K available (14720K kernel code, 1780K rwdata, 5816K rodata, 3456K init, 594K bss, 115500K reserved, 917504K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000231] Console: colour dummy device 80x25
- [ 0.000641] printk: console [tty1] enabled
- [ 0.000727] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.000752] pid_max: default: 32768 minimum: 301
- [ 0.000836] LSM: Security Framework initializing
- [ 0.000868] Yama: becoming mindful.
- [ 0.000963] AppArmor: AppArmor initialized
- [ 0.001017] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.001041] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.002776] rcu: Hierarchical SRCU implementation.
- [ 0.005192] EFI services will not be available.
- [ 0.005594] smp: Bringing up secondary CPUs ...
- [ 0.006160] Detected VIPT I-cache on CPU1
- [ 0.006226] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.006771] Detected VIPT I-cache on CPU2
- [ 0.006802] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.007325] Detected VIPT I-cache on CPU3
- [ 0.007352] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.007412] smp: Brought up 1 node, 4 CPUs
- [ 0.007472] SMP: Total of 4 processors activated.
- [ 0.007485] CPU features: detected: 32-bit EL0 Support
- [ 0.007497] CPU features: detected: CRC32 instructions
- [ 0.007508] CPU features: detected: 32-bit EL1 Support
- [ 0.015750] CPU: All CPU(s) started at EL2
- [ 0.015813] alternatives: patching kernel code
- [ 0.017049] devtmpfs: initialized
- [ 0.028326] Registered cp15_barrier emulation handler
- [ 0.028365] Registered setend emulation handler
- [ 0.028568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.028612] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.053266] pinctrl core: initialized pinctrl subsystem
- [ 0.054196] DMI not present or invalid.
- [ 0.054941] NET: Registered protocol family 16
- [ 0.056603] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
- [ 0.057007] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.057697] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.057796] audit: initializing netlink subsys (disabled)
- [ 0.058033] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
- [ 0.059961] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.059976] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.060003] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.060016] thermal_sys: Registered thermal governor 'user_space'
- [ 0.060738] cpuidle: using governor menu
- [ 0.061137] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.061243] ASID allocator initialised with 65536 entries
- [ 0.062548] Serial: AMBA PL011 UART driver
- [ 0.104795] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.104838] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.104852] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.104865] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.109816] cryptd: max_cpu_qlen set to 1000
- [ 0.180885] raid6: neonx8 gen() 2140 MB/s
- [ 0.248922] raid6: neonx8 xor() 1601 MB/s
- [ 0.316989] raid6: neonx4 gen() 2205 MB/s
- [ 0.385054] raid6: neonx4 xor() 1588 MB/s
- [ 0.453136] raid6: neonx2 gen() 2087 MB/s
- [ 0.521216] raid6: neonx2 xor() 1452 MB/s
- [ 0.589271] raid6: neonx1 gen() 1824 MB/s
- [ 0.657311] raid6: neonx1 xor() 1248 MB/s
- [ 0.725362] raid6: int64x8 gen() 1490 MB/s
- [ 0.793412] raid6: int64x8 xor() 783 MB/s
- [ 0.861490] raid6: int64x4 gen() 1662 MB/s
- [ 0.929527] raid6: int64x4 xor() 848 MB/s
- [ 0.997578] raid6: int64x2 gen() 1416 MB/s
- [ 1.065633] raid6: int64x2 xor() 750 MB/s
- [ 1.133674] raid6: int64x1 gen() 1053 MB/s
- [ 1.201743] raid6: int64x1 xor() 548 MB/s
- [ 1.201754] raid6: using algorithm neonx4 gen() 2205 MB/s
- [ 1.201765] raid6: .... xor() 1588 MB/s, rmw enabled
- [ 1.201776] raid6: using neon recovery algorithm
- [ 1.202543] ACPI: Interpreter disabled.
- [ 1.202956] reg-fixed-voltage regulator-flash_1v8: Failed to register regulator: -517
- [ 1.203315] reg-fixed-voltage regulator-vcc_1v8: Failed to register regulator: -517
- [ 1.203413] reg-fixed-voltage regulator-vcc_3v3: Failed to register regulator: -517
- [ 1.203591] reg-fixed-voltage regulator-vddao_1v8: Failed to register regulator: -517
- [ 1.203679] VDDAO_3V3: supplied by DC_IN
- [ 1.204537] iommu: Default domain type: Translated
- [ 1.204751] vgaarb: loaded
- [ 1.205796] SCSI subsystem initialized
- [ 1.206155] usbcore: registered new interface driver usbfs
- [ 1.206233] usbcore: registered new interface driver hub
- [ 1.206295] usbcore: registered new device driver usb
- [ 1.206787] pps_core: LinuxPPS API ver. 1 registered
- [ 1.206811] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.206840] PTP clock support registered
- [ 1.207172] EDAC MC: Ver: 3.0.0
- [ 1.209583] NetLabel: Initializing
- [ 1.209613] NetLabel: domain hash size = 128
- [ 1.209624] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.209694] NetLabel: unlabeled traffic allowed by default
- [ 1.210343] clocksource: Switched to clocksource arch_sys_counter
- [ 1.210701] VFS: Disk quotas dquot_6.6.0
- [ 1.210769] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.211326] AppArmor: AppArmor Filesystem Enabled
- [ 1.211413] pnp: PnP ACPI: disabled
- [ 1.218854] NET: Registered protocol family 2
- [ 1.219052] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 1.220256] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
- [ 1.220428] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 1.220602] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
- [ 1.220814] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.221007] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
- [ 1.221089] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.221148] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 1.221329] NET: Registered protocol family 1
- [ 1.221362] PCI: CLS 0 bytes, default 64
- [ 1.221579] Trying to unpack rootfs image as initramfs...
- [ 1.783815] Freeing initrd memory: 12396K
- [ 1.784848] kvm [1]: IPA Size Limit: 40 bits
- [ 1.785928] kvm [1]: vgic interrupt IRQ9
- [ 1.786061] kvm [1]: Hyp mode initialized successfully
- [ 1.791670] Initialise system trusted keyrings
- [ 1.791750] Key type blacklist registered
- [ 1.791899] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 1.796648] zbud: loaded
- [ 1.797976] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.798701] fuse: init (API version 7.32)
- [ 1.800608] integrity: Platform Keyring initialized
- [ 1.836489] xor: measuring software checksum speed
- [ 1.840556] 8regs : 2441 MB/sec
- [ 1.844083] 32regs : 2804 MB/sec
- [ 1.848112] arm64_neon : 2452 MB/sec
- [ 1.848122] xor: using function: 32regs (2804 MB/sec)
- [ 1.848139] Key type asymmetric registered
- [ 1.848151] Asymmetric key parser 'x509' registered
- [ 1.848214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
- [ 1.848346] io scheduler mq-deadline registered
- [ 1.848359] io scheduler kyber registered
- [ 1.848496] io scheduler bfq registered
- [ 1.856819] EINJ: ACPI disabled.
- [ 1.865092] soc soc0: Amlogic Meson G12A (Unknown) Revision 28:c (30:2) Detected
- [ 1.867161] VDDCPU: supplied by regulator-dummy
- [ 1.868336] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 1.872301] Serial: AMBA driver
- [ 1.872717] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 21, base_baud = 1500000) is a meson_uart
- [ 2.895550] printk: console [ttyAML0] enabled
- [ 2.900856] ff804000.serial: ttyAML6 at MMIO 0xff804000 (irq = 22, base_baud = 1500000) is a meson_uart
- [ 2.910126] ffd24000.serial: ttyAML7 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
- [ 2.918648] serial serial0: tty port ttyAML7 registered
- [ 3.102377] loop: module loaded
- [ 3.109171] tun: Universal TUN/TAP device driver, 1.6
- [ 3.110098] thunder_xcv, ver 1.0
- [ 3.111878] thunder_bgx, ver 1.0
- [ 3.115045] nicpf, ver 1.0
- [ 3.118248] e1000e: Intel(R) PRO/1000 Network Driver
- [ 3.122594] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.128530] igb: Intel(R) Gigabit Ethernet Network Driver
- [ 3.133802] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 3.139364] igbvf: Intel(R) Gigabit Virtual Function Network Driver
- [ 3.145530] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 3.151626] sky2: driver version 1.30
- [ 3.155584] VFIO - User Level meta-driver version: 0.3
- [ 3.162165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.166623] ehci-pci: EHCI PCI platform driver
- [ 3.171036] ehci-platform: EHCI generic platform driver
- [ 3.176386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.182289] ohci-pci: OHCI PCI platform driver
- [ 3.186720] ohci-platform: OHCI generic platform driver
- [ 3.192404] usbcore: registered new interface driver usb-storage
- [ 3.199448] mousedev: PS/2 mouse device common for all mice
- [ 3.204142] i2c /dev entries driver
- [ 3.215420] sdhci: Secure Digital Host Controller Interface driver
- [ 3.215973] sdhci: Copyright(c) Pierre Ossman
- [ 3.220634] Synopsys Designware Multimedia Card Interface Driver
- [ 3.227039] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.227567] meson-gx-mmc ffe05000.sd: Got CD GPIO
- [ 3.236536] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.243129] meson-sm: secure-monitor enabled
- [ 3.247109] hid: raw HID events driver (C) Jiri Kosina
- [ 3.251965] usbcore: registered new interface driver usbhid
- [ 3.257297] usbhid: USB HID core driver
- [ 3.263063] NET: Registered protocol family 10
- [ 3.266179] Segment Routing with IPv6
- [ 3.266385] gpio irq setup: hwirq: 0x3B irqfirst: 0x35 irqlast: 0x3C pin[47]
- [ 3.269165] NET: Registered protocol family 17
- [ 3.276450] genirq: Setting trigger mode 3 for irq 37 failed (meson_gpio_irq_set_type+0x0/0xf8)
- [ 3.280567] 8021q: 802.1Q VLAN Support v1.8
- [ 3.293335] Key type dns_resolver registered
- [ 3.298040] registered taskstats version 1
- [ 3.301553] Loading compiled-in X.509 certificates
- [ 3.308336] Loaded X.509 cert 'Build time autogenerated kernel key: aa89a9402982ed37148accd2e1228f4384319a9c'
- [ 3.317993] zswap: loaded using pool zstd/z3fold
- [ 3.321052] Key type ._fscrypt registered
- [ 3.324725] Key type .fscrypt registered
- [ 3.328636] Key type fscrypt-provisioning registered
- [ 3.335598] Btrfs loaded, crc32c=crc32c-generic
- [ 3.344846] mmc1: new high speed SDHC card at address 59b4
- [ 3.345816] mmcblk1: mmc1:59b4 USD 1.81 GiB
- [ 3.351452] Key type encrypted registered
- [ 3.353187] AppArmor: AppArmor sha1 policy hashing enabled
- [ 3.353189] mmcblk1: p1
- [ 3.373342] reg-fixed-voltage regulator-flash_1v8: Failed to register regulator: -517
- [ 3.375997] reg-fixed-voltage regulator-vcc_1v8: Failed to register regulator: -517
- [ 3.383341] VCC_3V3: supplied by VDDAO_3V3
- [ 3.387885] VCC_5V: supplied by DC_IN
- [ 3.391077] VDDAO_1V8: supplied by VDDAO_3V3
- [ 3.396950] meson-drm ff900000.vpu: Queued 2 outputs on vpu
- [ 3.401074] meson-drm ff900000.vpu: CVBS Output connector not available
- [ 3.434376] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
- [ 3.438989] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
- [ 3.446743] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
- [ 3.454183] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
- [ 3.650060] Console: switching to colour frame buffer device 128x48
- [ 3.667446] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
- [ 3.676505] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
- [ 3.679724] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
- [ 3.688237] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
- [ 3.692097] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
- [ 3.699208] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
- [ 3.707579] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 3.711522] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
- [ 3.719161] xhci-hcd xhci-hcd.2.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
- [ 3.728393] xhci-hcd xhci-hcd.2.auto: irq 39, io mem 0xff500000
- [ 3.734428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- [ 3.742398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.749558] usb usb1: Product: xHCI Host Controller
- [ 3.754384] usb usb1: Manufacturer: Linux 5.10.134-meson64 xhci-hcd
- [ 3.760594] usb usb1: SerialNumber: xhci-hcd.2.auto
- [ 3.765993] hub 1-0:1.0: USB hub found
- [ 3.769171] hub 1-0:1.0: 2 ports detected
- [ 3.773478] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 3.778565] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
- [ 3.786138] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
- [ 3.792639] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.800715] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
- [ 3.808810] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.815974] usb usb2: Product: xHCI Host Controller
- [ 3.820798] usb usb2: Manufacturer: Linux 5.10.134-meson64 xhci-hcd
- [ 3.827008] usb usb2: SerialNumber: xhci-hcd.2.auto
- [ 3.832244] hub 2-0:1.0: USB hub found
- [ 3.835582] hub 2-0:1.0: 1 port detected
- [ 3.841487] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
- [ 3.846002] FLASH_1V8: supplied by VCC_3V3
- [ 3.849333] VCC_1V8: supplied by VCC_3V3
- [ 3.855244] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
- [ 3.884271] Freeing unused kernel memory: 3456K
- [ 3.919201] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 3.924017] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 3.926489] Run /init as init process
- [ 3.932704] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 3.940096] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 3.944107] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
- [ 3.954808] mmc2: new HS200 MMC card at address 0001
- [ 3.958759] mmcblk2: mmc2:0001 Y1P008 7.28 GiB
- [ 3.962999] mmcblk2boot0: mmc2:0001 Y1P008 partition 1 4.00 MiB
- [ 3.968254] mmcblk2boot1: mmc2:0001 Y1P008 partition 2 4.00 MiB
- [ 3.973668] mmcblk2rpmb: mmc2:0001 Y1P008 partition 3 4.00 MiB, chardev (241:0)
- [ 4.023541] mmc0: new ultra high speed SDR50 SDIO card at address 0001
- [ 4.252593] meson-vrtc ff8000a8.rtc: registered as rtc0
- [ 4.255236] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
- [ 4.286744] touch@0 enforce active low on chipselect handle
- [ 4.665368] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
- [ 5.492539] systemd[1]: System time before build time, advancing clock.
- [ 5.525814] systemd[1]: Inserted module 'autofs4'
- [ 5.588109] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
- [ 5.610690] systemd[1]: Detected architecture arm64.
- [ 5.633253] systemd[1]: Set hostname to <radxa-zero>.
- [ 6.362290] systemd[1]: Queued start job for default target Graphical Interface.
- [ 6.368760] random: systemd: uninitialized urandom read (16 bytes read)
- [ 6.375622] systemd[1]: Created slice system-getty.slice.
- [ 6.382133] random: systemd: uninitialized urandom read (16 bytes read)
- [ 6.387091] systemd[1]: Created slice system-modprobe.slice.
- [ 6.394827] random: systemd: uninitialized urandom read (16 bytes read)
- [ 6.400075] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 6.409018] systemd[1]: Created slice User and Session Slice.
- [ 6.415837] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active.
- [ 6.427152] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 6.436473] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 6.447405] systemd[1]: Reached target Local Encrypted Volumes.
- [ 6.454917] systemd[1]: Reached target Paths.
- [ 6.461998] systemd[1]: Reached target Remote File Systems.
- [ 6.469063] systemd[1]: Reached target Slices.
- [ 6.476060] systemd[1]: Reached target Swap.
- [ 6.483006] systemd[1]: Reached target System Time Set.
- [ 6.490497] systemd[1]: Listening on Syslog Socket.
- [ 6.497896] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 6.506152] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 6.514595] systemd[1]: Listening on Journal Audit Socket.
- [ 6.522030] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.529835] systemd[1]: Listening on Journal Socket.
- [ 6.537408] systemd[1]: Listening on udev Control Socket.
- [ 6.544559] systemd[1]: Listening on udev Kernel Socket.
- [ 6.554122] systemd[1]: Mounting Huge Pages File System...
- [ 6.564475] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.575214] systemd[1]: Mounting Kernel Debug File System...
- [ 6.582729] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
- [ 6.592956] systemd[1]: Starting Restore / save the current clock...
- [ 6.604786] systemd[1]: Starting Set the console keyboard layout...
- [ 6.616021] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 6.630082] systemd[1]: Starting Load Kernel Module configfs...
- [ 6.641638] systemd[1]: Starting Load Kernel Module drm...
- [ 6.652773] systemd[1]: Starting Load Kernel Module fuse...
- [ 6.662915] systemd[1]: Started Nameserver information manager.
- [ 6.670518] systemd[1]: Reached target Network (Pre).
- [ 6.681953] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 6.688842] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 6.703279] systemd[1]: Starting Load Kernel Modules...
- [ 6.713694] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 6.725302] systemd[1]: Starting Coldplug All udev Devices...
- [ 6.738818] systemd[1]: Mounted Huge Pages File System.
- [ 6.746282] systemd[1]: Mounted POSIX Message Queue File System.
- [ 6.753945] systemd[1]: Mounted Kernel Debug File System.
- [ 6.761584] systemd[1]: Finished Restore / save the current clock.
- [ 6.770071] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ 6.781002] systemd[1]: modprobe@configfs.service: Succeeded.
- [ 6.785525] systemd[1]: Finished Load Kernel Module configfs.
- [ 6.791220] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
- [ 6.802142] systemd[1]: modprobe@drm.service: Succeeded.
- [ 6.806358] systemd[1]: Finished Load Kernel Module drm.
- [ 6.815191] systemd[1]: modprobe@fuse.service: Succeeded.
- [ 6.819695] systemd[1]: Finished Load Kernel Module fuse.
- [ 6.829321] systemd[1]: Finished Load Kernel Modules.
- [ 6.837875] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ 6.849404] systemd[1]: Mounting FUSE Control File System...
- [ 6.860169] systemd[1]: Mounting Kernel Configuration File System...
- [ 6.870134] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 6.876650] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 6.888802] systemd[1]: Starting Load/Save Random Seed...
- [ 6.899335] systemd[1]: Starting Apply Kernel Variables...
- [ 6.910177] systemd[1]: Starting Create System Users...
- [ 6.922063] systemd[1]: Finished Set the console keyboard layout.
- [ 6.932668] systemd[1]: Mounted FUSE Control File System.
- [ 6.940500] systemd[1]: Mounted Kernel Configuration File System.
- Armbian 22.08.0-trunk Bullseye ttyAML0
- radxa-zero login: mateusz
- Password:
- ____ _ _____
- | _ \ __ _ __| |_ ____ _ |__ /___ _ __ ___
- | |_) / _` |/ _` \ \/ / _` | / // _ \ '__/ _ \
- | _ < (_| | (_| |> < (_| | / /| __/ | | (_) |
- |_| \_\__,_|\__,_/_/\_\__,_| /____\___|_| \___/
- Welcome to Armbian 22.08.0-trunk Bullseye with Linux 5.10.134-meson64
- System load: 30% Up time: 0 min
- Memory usage: 6% of 1.90G IP: 192.168.1.160
- CPU temp: 41°C Usage of /: 62% of 1.7G
- [ 0 security updates available, 1 updates total: apt upgrade ]
- Last check: 2022-08-07 10:21
- [ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ]
- Last login: Sun Aug 7 10:43:23 UTC 2022 from 192.168.1.174 on pts/1
- mateusz@radxa-zero:~$ cat /proc/interrupts
- CPU0 CPU1 CPU2 CPU3
- 9: 0 0 0 0 GICv2 25 Level vgic
- 11: 5105 5954 3701 5342 GICv2 30 Level arch_timer
- 12: 0 0 0 0 GICv2 27 Level kvm guest vtimer
- 14: 5 0 0 0 GICv2 89 Edge dw_hdmi_top_irq, ff600000.hdmi-tx
- 21: 150 0 0 0 GICv2 225 Edge ttyAML0
- 23: 3 0 0 0 GICv2 232 Edge ff809000.adc
- 24: 0 0 0 0 GICv2 76 Edge vdec
- 25: 0 0 0 0 GICv2 64 Edge esparserirq
- 26: 818 0 0 0 GICv2 35 Edge meson
- 27: 0 0 0 0 GICv2 113 Level ffd13000.spi
- 28: 0 0 0 0 GICv2 71 Edge ffd1c000.i2c
- 29: 983 0 0 0 GICv2 58 Edge ttyAML7
- 30: 249135 0 0 0 GICv2 221 Edge ffe03000.sd
- 31: 6101 0 0 0 GICv2 222 Edge ffe05000.sd
- 32: 735 0 0 0 GICv2 223 Edge ffe07000.mmc
- 34: 0 0 0 0 GICv2 194 Level panfrost-job
- 35: 0 0 0 0 GICv2 193 Level panfrost-mmu
- 36: 3 0 0 0 GICv2 192 Level panfrost-gpu
- 38: 0 0 0 0 GICv2 63 Level ff400000.usb, ff400000.usb
- 39: 0 0 0 0 GICv2 62 Level xhci-hcd:usb1
- 40: 1 0 0 0 meson-gpio-irqchip 58 Edge ads7846
- IPI0: 2714 65758 56486 108404 Rescheduling interrupts
- IPI1: 774 1472 560 458 Function call interrupts
- IPI2: 0 0 0 0 CPU stop interrupts
- IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
- IPI4: 0 0 0 0 Timer broadcast interrupts
- IPI5: 13 11 1 7 IRQ work interrupts
- IPI6: 0 0 0 0 CPU wake-up interrupts
- Err: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement