smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.66-Unraid] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HITACHI
Product:              HUS72302CLAR2000
Revision:             C310
Compliance:           SPC-4
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000cca01b95cb94
Serial number:        YFJNBV6D
Device type:          disk
Transport protocol:   SAS (SPL-4)
Local Time is:        Mon Sep 15 12:13:02 2025 CDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     49 C
Drive Trip Temperature:        85 C

Manufactured in week 02 of year 2013
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  25
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  3143
Elements in grown defect list: 0

Vendor (Seagate Cache) information
  Blocks sent to initiator = 2715107625350987776

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0   246495         0    246495   36543357      97752.722           0
write:         0  2104327         0   2104327     118697      66283.778           0
verify:        0       22         0        22     302192      64701.289           0

Non-medium error count:        0

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background short  Completed                   -   15579                 - [-   -    -]
# 2  Background short  Completed                   -   12526                 - [-   -    -]

Long (extended) Self-test duration: 6 seconds [0.1 minutes]

Background scan results log
  Status: waiting until BMS interval timer expires
    Accumulated power on time, hours:minutes 15666:35 [939995 minutes]
    Number of background scans performed: 454,  scan progress: 0.00%
    Number of background medium scans performed: 454
Device does not support General statistics and performance logging

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 2
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: power on
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=1
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca01b95cb95
    attached SAS address = 0x50060480088742bf
    attached phy identifier = 20
    Invalid DWORD count = 9
    Running disparity error count = 9
    Loss of DWORD synchronization count = 2
    Phy reset problem count = 0
relative target port id = 2
  generation code = 2
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: power on
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=1
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000cca01b95cb96
    attached SAS address = 0x50060480088797bf
    attached phy identifier = 9
    Invalid DWORD count = 21
    Running disparity error count = 21
    Loss of DWORD synchronization count = 3
    Phy reset problem count = 0