API tools faq
paste
Advertisement
Guest User

ARMBIAN 5.32.170817 nightly Debian GNU/Linux 9 (stretch) 4.4

a guest
Aug 19th, 2017
631
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 37.39 KB | None | 0 0
raw download clone embed print report
  1. BL1: v1.2(release):armada-17.02.0:
  2. BL1: Built : 09:41:56, Jun 2 2NOTICE: BL2: v1.2(release):armada-17.02.0:
  3. NOTICE: BL2: Built : 09:41:57, Jun 2 20NOTICE: BL31: v1.2(release):armada-17.02.0:
  4. NOTICE: BL31:
  5.  
  6. U-Boot 2015.01-armada-17.02.0-g8128e91 (Jun 02 2017 - 09:41:51)
  7.  
  8. I2C: ready
  9. DRAM: 1 GiB
  10. Board: DB-88F3720-ESPRESSOBin
  11. CPU @ 1000 [MHz]
  12. L2 @ 800 [MHz]
  13. TClock @ 200 [MHz]
  14. DDR @ 800 [MHz]
  15. Comphy-0: PEX0 2.5 Gbps
  16. Comphy-1: USB3 5 Gbps
  17. Comphy-2: SATA0 5 Gbps
  18. Now running in RAM - U-Boot at: 3ff2b000
  19. U-Boot DT blob at : 000000003fa18168
  20. MMC: XENON-SDHCI: 0
  21. SF: Detected W25Q32DW with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  22. PCIE-0: Link down
  23. SCSI: Target spinup took 0 ms.
  24. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  25. flags: ncq led only pmp fbss pio slum part sxs
  26. Net: neta0
  27. Hit any key to stop autoboot: 0
  28. switch to partitions #0, OK
  29. mmc0 is current device
  30. 14361088 bytes read in 4889 ms (2.8 MiB/s)
  31. 4499487 bytes read in 1656 ms (2.6 MiB/s)
  32. 11444 bytes read in 164 ms (67.4 KiB/s)
  33. ## Loading init Ramdisk from Legacy Image at 01100000 ...
  34. Image Name: uInitrd
  35. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  36. Data Size: 4499423 Bytes = 4.3 MiB
  37. Load Address: 00000000
  38. Entry Point: 00000000
  39. Verifying Checksum ... OK
  40. ## Flattened Device Tree blob at 01000000
  41. Booting using the fdt blob at 0x1000000
  42. Loading Ramdisk to 1fbb5000, end 1ffff7df ... OK
  43. Using Device Tree in place at 0000000001000000, end 0000000001005cb3
  44.  
  45. Starting kernel ...
  46.  
  47. Timer summary in microseconds:
  48. Mark Elapsed Stage
  49. 0 0 reset
  50. 523,000 523,000 id=64
  51. 536,000 13,000 id=65
  52. 536,000 0 main_loop
  53. 10,374,000 9,838,000 bootm_start
  54. 15,148,000 4,774,000 id=9
  55. 15,148,000 0 id=10
  56. 16,298,000 1,150,000 id=11
  57. 16,304,000 6,000 id=12
  58. 17,758,000 1,454,000 start_kernel
  59. 17,758,000 0 id=15
  60. 169,905,372,786,483,901,28169,905,372,786,306,321,28 board_init_f
  61.  
  62. Accumulated time:
  63. [ 0.000000] Booting Linux on physical CPU 0x0
  64. [ 0.000000] Initializing cgroup subsys cpuset
  65. [ 0.000000] Initializing cgroup subsys cpu
  66. [ 0.000000] Initializing cgroup subsys cpuacct
  67. [ 0.000000] Linux version 4.4.82-mvebu64 (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT Wed Aug 16 21:50:24 CEST 2017
  68. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  69. [ 0.000000] earlycon: Early serial console at MMIO 0xd0012000 (options '')
  70. [ 0.000000] bootconsole [uart0] enabled
  71. [ 0.000000] efi: Getting EFI parameters from FDT:
  72. [ 0.000000] efi: UEFI not found.
  73. [ 0.000000] cma: Reserved 16 MiB at 0x000000003f000000
  74. [ 0.000000] psci: probing for conduit method from DT.
  75. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  76. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  77. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  78. [ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03efc6000 s25240 r8192 d32104 u65536
  79. [ 0.000000] Detected VIPT I-cache on CPU0
  80. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  81. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257536
  82. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p1 rw rootwait
  83. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  84. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  85. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  86. [ 0.000000] software IO TLB [mem 0x39c00000-0x3dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
  87. [ 0.000000] Memory: 927256K/1046528K available (9633K kernel code, 596K rwdata, 3324K rodata, 356K init, 290K bss, 102888K reserved, 16384K cma-reserved)
  88. [ 0.000000] Virtual kernel memory layout:
  89. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  90. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  91. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
  92. [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
  93. [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  94. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  95. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
  96. [ 0.000000] .init : 0xffffffc000d2a000 - 0xffffffc000d83000 ( 356 KB)
  97. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000d29554 ( 12966 KB)
  98. [ 0.000000] .data : 0xffffffc000d9d000 - 0xffffffc000e32200 ( 597 KB)
  99. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  100. [ 0.000000] Preemptible hierarchical RCU implementation.
  101. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  102. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
  103. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
  104. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  105. [ 0.000000] GIC: Using split EOI/Deactivate mode
  106. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000d1d40000
  107. [ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
  108. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  109. [ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  110. [ 0.008399] Console: colour dummy device 80x25
  111. [ 0.012908] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
  112. [ 0.023460] pid_max: default: 32768 minimum: 301
  113. [ 0.028260] Security Framework initialized
  114. [ 0.032449] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  115. [ 0.039326] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  116. [ 0.047166] Initializing cgroup subsys memory
  117. [ 0.051592] Initializing cgroup subsys devices
  118. [ 0.056145] Initializing cgroup subsys freezer
  119. [ 0.060713] Initializing cgroup subsys net_cls
  120. [ 0.065281] Initializing cgroup subsys net_prio
  121. [ 0.069940] Initializing cgroup subsys hugetlb
  122. [ 0.074509] Initializing cgroup subsys pids
  123. [ 0.079040] EFI services will not be available.
  124. [ 0.083644] ASID allocator initialised with 65536 entries
  125. [ 0.125342] Detected VIPT I-cache on CPU1
  126. [ 0.125368] CPU1: found redistributor 1 region 0:0x00000000d1d60000
  127. [ 0.125390] CPU1: Booted secondary processor [410fd034]
  128. [ 0.125443] Brought up 2 CPUs
  129. [ 0.144362] SMP: Total of 2 processors activated.
  130. [ 0.149206] CPU features: detected feature: GIC system register CPU interface
  131. [ 0.156554] CPU: All CPU(s) started at EL2
  132. [ 0.160773] alternatives: patching kernel code
  133. [ 0.165777] devtmpfs: initialized
  134. [ 0.171854] DMI not present or invalid.
  135. [ 0.175953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  136. [ 0.185935] futex hash table entries: 512 (order: 4, 65536 bytes)
  137. [ 0.192902] xor: measuring software checksum speed
  138. [ 0.237828] 8regs : 1862.000 MB/sec
  139. [ 0.282091] 8regs_prefetch: 1711.000 MB/sec
  140. [ 0.326709] 32regs : 2273.000 MB/sec
  141. [ 0.370968] 32regs_prefetch: 1984.000 MB/sec
  142. [ 0.375640] xor: using function: 32regs (2273.000 MB/sec)
  143. [ 0.381209] pinctrl core: initialized pinctrl subsystem
  144. [ 0.387664] NET: Registered protocol family 16
  145. [ 0.404237] cpuidle: using governor ladder
  146. [ 0.420399] cpuidle: using governor menu
  147. [ 0.424585] vdso: 2 pages (1 code @ ffffffc000da5000, 1 data @ ffffffc000da4000)
  148. [ 0.432156] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  149. [ 0.439828] DMA: preallocated 256 KiB pool for atomic allocations
  150. [ 0.446139] Serial: AMBA PL011 UART driver
  151. [ 0.451566] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 7, base_baud = 0) is a mvebu-uart
  152. [ 0.460478] console [ttyMV0] enabled
  153. [ 0.460478] console [ttyMV0] enabled
  154. [ 0.467822] bootconsole [uart0] disabled
  155. [ 0.467822] bootconsole [uart0] disabled
  156. [ 0.476617] armada-3700-pinctrl d0013830.north-bridge-pinctrl: registered pinctrl driver
  157. [ 0.485275] armada-3700-pinctrl d0018830.south-bridge-pinctrl: registered pinctrl driver
  158. [ 0.588889] raid6: int64x1 gen() 373 MB/s
  159. [ 0.660850] raid6: int64x1 xor() 381 MB/s
  160. [ 0.732871] raid6: int64x2 gen() 598 MB/s
  161. [ 0.804918] raid6: int64x2 xor() 513 MB/s
  162. [ 0.876963] raid6: int64x4 gen() 911 MB/s
  163. [ 0.945006] raid6: int64x4 xor() 645 MB/s
  164. [ 1.017089] raid6: int64x8 gen() 945 MB/s
  165. [ 1.089152] raid6: int64x8 xor() 611 MB/s
  166. [ 1.161216] raid6: neonx1 gen() 629 MB/s
  167. [ 1.233257] raid6: neonx1 xor() 651 MB/s
  168. [ 1.305296] raid6: neonx2 gen() 1031 MB/s
  169. [ 1.377356] raid6: neonx2 xor() 881 MB/s
  170. [ 1.449408] raid6: neonx4 gen() 1330 MB/s
  171. [ 1.521453] raid6: neonx4 xor() 1013 MB/s
  172. [ 1.589534] raid6: neonx8 gen() 1381 MB/s
  173. [ 1.661579] raid6: neonx8 xor() 1028 MB/s
  174. [ 1.665365] raid6: using algorithm neonx8 gen() 1381 MB/s
  175. [ 1.671565] raid6: .... xor() 1028 MB/s, rmw enabled
  176. [ 1.676610] raid6: using intx1 recovery algorithm
  177. [ 1.681839] ACPI: Interpreter disabled.
  178. [ 1.685933] gpio-regulator soc:internal-regs:regulator@0: Could not obtain regulator setting GPIOs: -517
  179. [ 1.695778] armada3700-avs d0011500.avs: error getting max cpu frequency
  180. [ 1.702723] armada3700-avs d0011500.avs: armada_3700_avs_probe: failed initialization
  181. [ 1.710863] vgaarb: loaded
  182. [ 1.713834] SCSI subsystem initialized
  183. [ 1.717746] usbcore: registered new interface driver usbfs
  184. [ 1.723244] usbcore: registered new interface driver hub
  185. [ 1.728798] usbcore: registered new device driver usb
  186. [ 1.733974] pps_core: LinuxPPS API ver. 1 registered
  187. [ 1.739277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  188. [ 1.748072] PTP clock support registered
  189. [ 1.752541] dmi: Firmware registration failed.
  190. [ 1.757068] armada37xx-clk-pm d0014018.cpu-pm-clk: error getting max cpu frequency
  191. [ 1.765798] NetLabel: Initializing
  192. [ 1.768778] NetLabel: domain hash size = 128
  193. [ 1.773294] NetLabel: protocols = UNLABELED CIPSOv4
  194. [ 1.778537] NetLabel: unlabeled traffic allowed by default
  195. [ 1.784449] clocksource: Switched to clocksource arch_sys_counter
  196. [ 1.790914] pnp: PnP ACPI: disabled
  197. [ 1.801275] NET: Registered protocol family 2
  198. [ 1.805933] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  199. [ 1.813065] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  200. [ 1.819848] TCP: Hash tables configured (established 8192 bind 8192)
  201. [ 1.826536] UDP hash table entries: 512 (order: 2, 16384 bytes)
  202. [ 1.832241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  203. [ 1.839354] NET: Registered protocol family 1
  204. [ 1.843701] RPC: Registered named UNIX socket transport module.
  205. [ 1.849624] RPC: Registered udp transport module.
  206. [ 1.854655] RPC: Registered tcp transport module.
  207. [ 1.859228] RPC: Registered tcp NFSv4.1 backchannel transport module.
  208. [ 1.866518] Trying to unpack rootfs image as initramfs...
  209. [ 2.090922] Freeing initrd memory: 4392K
  210. [ 2.095436] kvm [1]: GICv3: no GICV resource entry
  211. [ 2.100145] kvm [1]: disabling GICv2 emulation
  212. [ 2.104988] kvm [1]: interrupt-controller@ffffffc0000abdd8 IRQ30
  213. [ 2.111093] kvm [1]: timer IRQ3
  214. [ 2.114268] kvm [1]: Hyp mode initialized successfully
  215. [ 2.121722] audit: initializing netlink subsys (disabled)
  216. [ 2.127126] audit: type=2000 audit(2.052:1): initialized
  217. [ 2.133054] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  218. [ 2.147535] VFS: Disk quotas dquot_6.6.0
  219. [ 2.151680] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  220. [ 2.160380] NFS: Registering the id_resolver key type
  221. [ 2.166108] Key type id_resolver registered
  222. [ 2.170101] Key type id_legacy registered
  223. [ 2.174426] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  224. [ 2.181100] jffs2: version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
  225. [ 2.187994] fuse init (API version 7.23)
  226. [ 2.192524] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  227. [ 2.203516] async_tx: api initialized (async)
  228. [ 2.208210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  229. [ 2.215429] io scheduler noop registered
  230. [ 2.219742] io scheduler deadline registered
  231. [ 2.223859] io scheduler cfq registered (default)
  232. [ 2.230649] irq: Cannot allocate irq_descs @ IRQ38, assuming pre-allocated
  233. [ 2.237660] irq: Cannot allocate irq_descs @ IRQ74, assuming pre-allocated
  234. [ 2.245561] libphy: Fixed MDIO Bus: probed
  235. [ 2.249664] tun: Universal TUN/TAP device driver, 1.6
  236. [ 2.255030] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  237. [ 2.261100] libphy: mdio_driver_register: mv88e6xxx
  238. [ 2.266259] libphy: orion_mdio_bus: probed
  239. [ 2.270345] mdio_bus d0032004.mdio-mi:01: mdio_device_register
  240. [ 2.280074] sky2: driver version 1.30
  241. [ 2.283532] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  242. [ 2.289722] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  243. [ 2.295714] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  244. [ 2.303016] igb: Copyright (c) 2007-2014 Intel Corporation.
  245. [ 2.308566] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
  246. [ 2.316854] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  247. [ 2.322831] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
  248. [ 2.330873] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
  249. [ 2.336417] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
  250. [ 2.346145] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
  251. [ 2.352574] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  252. [ 2.360159] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  253. [ 2.367420] advk-pcie d0070000.pcie: Failed to obtain clock from DT
  254. [ 2.374415] mv_xor d0060900.xor: Marvell shared XOR driver
  255. [ 2.401026] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  256. [ 2.429022] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  257. [ 2.441516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  258. [ 2.450117] Unable to detect cache hierarchy from DT for CPU 0
  259. [ 2.456917] brd: module loaded
  260. [ 2.464362] loop: module loaded
  261. [ 2.467998] SCSI Media Changer driver v0.25
  262. [ 2.474261] VFIO - User Level meta-driver version: 0.3
  263. [ 2.482806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  264. [ 2.489307] ehci-pci: EHCI PCI platform driver
  265. [ 2.494069] ehci-platform: EHCI generic platform driver
  266. [ 2.499343] ehci-orion: EHCI orion driver
  267. [ 2.503618] orion-ehci d005e000.usb: EHCI Host Controller
  268. [ 2.509102] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  269. [ 2.517333] orion-ehci d005e000.usb: irq 27, io mem 0xd005e000
  270. [ 2.532461] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  271. [ 2.538848] hub 1-0:1.0: USB hub found
  272. [ 2.542134] hub 1-0:1.0: 1 port detected
  273. [ 2.546924] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  274. [ 2.552806] ohci-pci: OHCI PCI platform driver
  275. [ 2.557897] ohci-platform: OHCI generic platform driver
  276. [ 2.563412] usbcore: registered new interface driver uas
  277. [ 2.568834] usbcore: registered new interface driver usb-storage
  278. [ 2.574808] usbcore: registered new interface driver ums-alauda
  279. [ 2.581003] usbcore: registered new interface driver ums-cypress
  280. [ 2.587292] usbcore: registered new interface driver ums-datafab
  281. [ 2.593403] usbcore: registered new interface driver ums_eneub6250
  282. [ 2.600047] usbcore: registered new interface driver ums-freecom
  283. [ 2.606043] usbcore: registered new interface driver ums-isd200
  284. [ 2.612149] usbcore: registered new interface driver ums-jumpshot
  285. [ 2.618168] usbcore: registered new interface driver ums-karma
  286. [ 2.624545] usbcore: registered new interface driver ums-onetouch
  287. [ 2.630668] usbcore: registered new interface driver ums-realtek
  288. [ 2.636859] usbcore: registered new interface driver ums-sddr09
  289. [ 2.643149] usbcore: registered new interface driver ums-sddr55
  290. [ 2.649290] usbcore: registered new interface driver ums-usbat
  291. [ 2.656625] mousedev: PS/2 mouse device common for all mice
  292. [ 2.662811] i2c /dev entries driver
  293. [ 2.666735] md: linear personality registered for level -1
  294. [ 2.671986] md: raid0 personality registered for level 0
  295. [ 2.677636] md: raid1 personality registered for level 1
  296. [ 2.683199] md: raid10 personality registered for level 10
  297. [ 2.688869] md: raid6 personality registered for level 6
  298. [ 2.694229] md: raid5 personality registered for level 5
  299. [ 2.699827] md: raid4 personality registered for level 4
  300. [ 2.705392] cpu cpu0: Cannot get clock for CPU0
  301. [ 2.710152] sdhci: Secure Digital Host Controller Interface driver
  302. [ 2.716557] sdhci: Copyright(c) Pierre Ossman
  303. [ 2.720433] sdhci-pltfm: SDHCI platform and OF driver helper
  304. [ 2.726644] xenon-sdhci d00d0000.sdhci: Failed to setup input clk: -517
  305. [ 2.733771] ledtrig-cpu: registered to indicate activity on CPUs
  306. [ 2.739541] hidraw: raw HID events driver (C) Jiri Kosina
  307. [ 2.747726] NET: Registered protocol family 10
  308. [ 2.753098] NET: Registered protocol family 17
  309. [ 2.757768] Distributed Switch Architecture driver version 0.1
  310. [ 2.763882] Key type dns_resolver registered
  311. [ 2.769014] registered taskstats version 1
  312. [ 2.775021] Btrfs loaded
  313. [ 2.786940] Key type encrypted registered
  314. [ 2.791417] armada3700-avs d0011500.avs: Unsupported CPU frwquency 25MHZ
  315. [ 2.798126] armada3700-avs d0011500.avs: armada_3700_avs_probe: failed initialization
  316. [ 2.806297] armada3700-avs: probe of d0011500.avs failed with error -1
  317. [ 2.817275] mvneta d0030000.ethernet eth0: Using device tree mac address f0:ad:4e:03:69:d4
  318. [ 3.025782] PCI host bridge /soc/pcie@d0070000 ranges:
  319. [ 3.031031] MEM 0xe8000000..0xe8ffffff -> 0xe8000000
  320. [ 3.036410] IO 0xe9000000..0xe900ffff -> 0xe9000000
  321. [ 4.041849] advk-pcie d0070000.pcie: link never came up
  322. [ 4.047259] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
  323. [ 4.053666] pci_bus 0000:00: root bus resource [bus 00-ff]
  324. [ 4.058963] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
  325. [ 4.065968] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
  326. [ 5.507403] advk-pcie d0070000.pcie: Posted PIO Response Status: CA, 0xe00 @ 0x0
  327. [ 5.517243] ahci-mvebu d00e0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  328. [ 5.526432] ahci-mvebu d00e0000.sata: flags: ncq sntf led only pmp fbs pio slum part sxs
  329. [ 5.535421] scsi host0: ahci-mvebu
  330. [ 5.538845] ata1: SATA max UDMA/133 mmio [mem 0xd00e0000-0xd00e0177] port 0x100 irq 29
  331. [ 5.546906] xhci-hcd d0058000.usb3: xHCI Host Controller
  332. [ 5.552181] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 2
  333. [ 5.560170] xhci-hcd d0058000.usb3: hcc params 0x0a000998 hci version 0x100 quirks 0x00010090
  334. [ 5.568820] xhci-hcd d0058000.usb3: irq 26, io mem 0xd0058000
  335. [ 5.575608] hub 2-0:1.0: USB hub found
  336. [ 5.579339] hub 2-0:1.0: 1 port detected
  337. [ 5.583849] xhci-hcd d0058000.usb3: xHCI Host Controller
  338. [ 5.588910] xhci-hcd d0058000.usb3: new USB bus registered, assigned bus number 3
  339. [ 5.596688] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  340. [ 5.605605] hub 3-0:1.0: USB hub found
  341. [ 5.609338] hub 3-0:1.0: 1 port detected
  342. [ 5.613936] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  343. [ 5.620121] xenon-sdhci d00d0000.sdhci: No vmmc regulator found
  344. [ 5.660571] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  345. [ 5.699040] libphy: mv88e6xxx SMI: probed
  346. [ 5.702975] mdio_bus d0032004.mdio-mi: switch 0x341 probed: Marvell 88E6341, revision 0
  347. [ 5.711029] mvneta d0030000.ethernet eth0: [0]: detected a Marvell 88E6341 switch
  348. [ 5.736470] mmc0: new high speed SDHC card at address aaaa
  349. [ 5.742115] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  350. [ 5.751384] mmcblk0: p1
  351. [ 5.798914] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1)
  352. [ 5.812984] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1)
  353. [ 5.827045] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1)
  354. [ 5.840750] hctosys: unable to open rtc device (rtc0)
  355. [ 6.040467] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  356. [ 6.050790] ata1.00: ATA-8: OCZ-VERTEX2, 1.37, max UDMA/133
  357. [ 6.056558] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
  358. [ 6.070774] ata1.00: configured for UDMA/133
  359. [ 6.075108] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.37 PQ: 0 ANSI: 5
  360. [ 6.083739] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
  361. [ 6.083749] sd 0:0:0:0: Attached scsi generic sg0 type 0
  362. [ 6.096730] sd 0:0:0:0: [sda] Write Protect is off
  363. [ 6.101707] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  364. [ 6.112650] sda: sda1
  365. [ 6.115987] sd 0:0:0:0: [sda] Attached SCSI removable disk
  366. [ 6.121495] Freeing unused kernel memory: 356K
  367. [ 6.126228] Freeing alternatives memory: 76K
  368. Loading, please wait...
  369. starting version 232
  370. [ 6.159539] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  371. [ 6.163654] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  372. [ 6.163791] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  373. [ 6.163840] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  374. [ 6.163920] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  375. [ 6.164145] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  376. [ 6.164207] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  377. [ 6.164634] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  378. [ 6.165037] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  379. [ 6.165077] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
  380. Begin: Loading essential drivers ... done.
  381. Begin: Running /scripts/init-premount ... done.
  382. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  383. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  384. done.
  385. Begin: Will now check root file system ... fsck from util-linux 2.29.2
  386. fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmcblk0p1
  387. fsck exited with status code 8
  388. done.
  389. Warning: File system check failed but did not detect errors
  390. [ 11.720881] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  391. done.
  392. Begin: Running /scripts/local-bottom ... done.
  393. Begin: Running /scripts/init-bottom ... done.
  394. [ 12.198592] systemd[1]: System time before build time, advancing clock.
  395. [ 12.229604] ip_tables: (C) 2000-2006 Netfilter Core Team
  396. [ 12.260428] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  397. [ 12.279111] systemd[1]: Detected architecture arm64.
  398.  
  399. Welcome to Debian GNU/Linux 9 (stretch)!
  400.  
  401. [ 12.299797] systemd[1]: Set hostname to <espressobin>.
  402. [ 12.663573] systemd[1]: Listening on Syslog Socket.
  403. [ OK ] Listening on Syslog Socket.
  404. [ OK ] Listening on Journal Socket (/dev/log).Socket (/dev/log).
  405. [ 12.692825] systemd[1]: Started Dispatch Password Requests to Console Directory Watc[ OK ] Started Dispatch Password Requests to Console Directory Watch.
  406. [ 12.712741] systemd[1]: Listening on fsck to fsckd communication Socket.[ OK ] Listening on fsck to fsckd communication Socket.
  407. [ 12.728816] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  408. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  409. [ 12.748627] systemd[1]: Reached target Encrypted Volumes.[ OK ] Reached target Encrypted Volumes.
  410. [ 12.760630] systemd[1]: Reached target Paths.
  411. [ OK ] Reached target Paths.
  412. [ 12.772605] systemd[1]: Reached target Remote File Syst[ OK ] Reached target Remote File Systems.
  413. [ 12.785196] systemd[1]: Created slice System Slice.[ OK ] Created slice System Slice.
  414. [ 12.797243] systemd[1]: Created slice system-serial\x2dgetty.slice.
  415. [ OK ] Created slice system-serial\x2dgetty.slice.
  416. [ 12.813213] systemd[1]: Created slice system-getty.slic[ OK ] Created slice system-getty.slice.
  417. [ 12.840742] systemd[1]: Mounting Huge Pages File System...
  418. Mounting Huge Pages File System...
  419. [ 12.853023] systemd[1]: Listening on udev Kernel Socket[ OK ] Listening on udev Kernel Socket.
  420. [ 12.867364] systemd[1]: Mounting Debug File System...
  421. Mounting Debug File System...
  422. [ 12.881059] systemd[1]: Listening on Journal Socket.
  423. [ OK ] Listening on Journal Socket.
  424. [ 12.895113] systemd[1]: Starting Remount Root and Kernel File Systems...
  425. Starting Remount Root and Kernel File Systems...
  426. [ 12.913412] systemd[1]: Created slice User and Session Slice.
  427. [ OK ] Created slice User and Session Slice.
  428. [ 12.929057] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  429. [ 12.944807] systemd[1]: Mounting POSIX Message Queue File System...
  430. Mounting POSIX Message Queue File System...
  431. [ 12.967352] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  432. Starting Create list of required st?.|ce nodes for the current kernel...
  433. [ 13.006172] systemd[1]: Starting Set the console keyboard layout...
  434. Starting Set the console keyboard layout...
  435. [ 13.020766] systemd[1]: Reached target Slices.
  436. [ OK ] Reached target Slices.
  437. [ 13.033051] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  438. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  439. [ 13.061058] systemd[1]: Starting Restore / save the current clock...
  440. Starting Restore / save the current clock...
  441. [ 13.079067] systemd[1]: Starting Nameserver information manager...
  442. Starting Nameserver information manager...
  443. [ 13.101398] systemd[1]: Listening on udev Control Socket.
  444. [ OK ] Listening on udev Control Socket.
  445. [ 13.144988] systemd[1]: Starting Load Kernel Modules...
  446. Starting Load Kernel Modules...
  447. [ 13.155268] systemd[1]: Listening on Journal Audit Socket.
  448. [ OK ] Listening on Journal Audit Socket.
  449. [ 13.188005] systemd[1]: Mounted Debug File System.
  450. [ OK ] Mounted Debug File System.
  451. [ 13.200838] systemd[1]: Mounted Huge Pages File System.
  452. [ OK ] Mounted Huge Pages File System.
  453. [ 13.216813] systemd[1]: Mounted POSIX Message Queue File System.[ OK ] Mounted POSIX Message Queue File System.
  454. [ 13.234193] systemd[1]: Started Remount Root and Kernel File Systems.
  455. [ OK ] Started Remount Root and Kernel File Systems.
  456. [ 13.250289] systemd[1]: Started Create list of required static device nodes for the current kernel.
  457. [ OK ] Started Create list of required sta?.|vice nodes for the current kernel.
  458. [ 13.273688] systemd[1]: Started Restore / save the current clock.[ OK ] Started Restore / save the current clock.
  459. [ 13.306099] systemd[1]: Started Load Kernel Modules.
  460. [ OK ] Started Load Kernel Modules.
  461. [ 13.325724] systemd[1]: Started Nameserver information manager.
  462. [ OK ] Started Nameserver information manager.
  463. [ 13.352110] systemd[1]: Time has been changed
  464. [ 13.367939] systemd[1]: Mounting FUSE Control File System...
  465. Mounting FUSE Control File System...
  466. [ 13.391589] systemd[1]: Mounting Configuration File System...
  467. Mounting Configuration File System...
  468. [ 13.438550] systemd[1]: Starting Apply Kernel Variables...
  469. Starting Apply Kernel Variables...
  470. [ 13.489066] systemd[1]: Starting Create Static Device Nodes in /dev...
  471. Starting Create Static Device Nodes in /dev...
  472. [ 13.533027] systemd[1]: Starting udev Coldplug all Devices...
  473. Starting udev Coldplug all Devices...
  474. [ 13.550633] systemd[1]: Activating swap /var/swap...
  475. Activating swap /var/swap...
  476. [ 13.571346] systemd[1]: Starting Load/Save Random Seed...
  477. Starting Load/Save Random Seed...
  478. [ 13.587033] systemd[1]: Mounted Configuration File System.
  479. [ OK ] Mounted Configuration File System.
  480. [ 13.608781] systemd[1]: Mounted FUSE Control File System.
  481. [ OK ] Mounted FUSE Control File System.
  482. [ 13.625691] systemd[1]: Started Set the console keyboard layout.
  483. [ OK ] Started Set the console keyboard layout.
  484. [ 13.647120] systemd[1]: Started Apply Kernel Variables.
  485. [ OK ] Started Apply Kernel Variables.
  486. [ 13.669778] systemd[1]: Started Create Static Device Nodes in /dev.
  487. [ OK ] Started Create Static Device Nodes in /dev.
  488. [ 13.684627] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k SS
  489. [ 13.713580] systemd[1]: Activated swap /var/swap.
  490. [ OK ] Activated swap /var/swap.
  491. [ OK ] Started Load/Save Random Seed./Save Random Seed.
  492. [ 13.752811] systemd[1]: Reached target Swap.
  493. [ OK ] Reached target Swap.
  494. [ 13.784916] systemd[1]: Starting udev Kernel Device Manager...
  495. Starting udev Kernel Device Manager...
  496. [ 13.804864] systemd[1]: Reached target Local File Systems (Pre).
  497. [ OK ] Reached target Local File Systems (Pre).
  498. [ 13.836798] systemd[1]: Mounting /tmp...
  499. Mounting /tmp...
  500. [ 13.863436] systemd[1]: Mounted /tmp.
  501. [ OK ] Mounted /tmp.
  502. [ 13.873800] systemd[1]: Started udev Coldplug all Devices.[ OK ] Started udev Coldplug all Devices.
  503. [ 13.889990] systemd[1]: Started udev Kernel Device Manager.
  504. [ OK ] Started udev Kernel Device Manager.
  505. [ 13.906964] systemd[1]: Reached target Local File Systems.
  506. [ OK ] Reached target Local File Systems.
  507. [ 13.936903] systemd[1]: Starting Raise network interfaces...
  508. Starting Raise network interfaces...
  509. [ 13.955113] systemd[1]: Starting Armbian enhanced Log2Ram...
  510. Starting Armbian enhanced Log2Ram...
  511. [ 13.979905] systemd[1]: Starting Set console font and keymap...
  512. Starting Set console font and keymap...
  513. [ 13.997928] systemd[1]: Couldn't stat device /dev/pts/ptmx
  514. [ 14.049266] systemd[1]: Started Entropy daemon using the HAVEGE algorithm.
  515. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  516. [ OK ] Started Set console font and keymap.e font and keymap.
  517. [ 14.294414] systemd[1]: Found device /dev/ttyS0.[ OK ] Found device /dev/ttyS0.
  518. [ 14.330355] systemd[1]: Found device /dev/ttyMV0.
  519. [ OK ] Found device /dev/ttyMV0.
  520. [ 14.388195] systemd[1]: Started Armbian enhanced Log2Ram.
  521. [ OK ] Started Armbian enhanced Log2Ram.
  522. [ 14.425078] systemd[1]: Starting Journal Service...
  523. Starting Journal Service...
  524. [ 14.551373] systemd[1]: Started Journal Service[ OK ] Started Journal Service.
  525. Starting Flush Journal to Persistent Storage...
  526. [ 14.704317] systemd-journald[1295]: Received request to flush runtime journal from PID 1
  527. [ OK ] Started Flush Journal to Persistent Storage.
  528. Starting Create Volatile Files and Directories...
  529. [ OK ] Started Create Volatile Files and Directories.
  530. [ OK ] Reached target System Time Synchronized.
  531. Starting Update UTMP about System Boot/Shutdown...
  532. [ OK ] Started Update UTMP about System Boot/Shutdown.
  533. [ 14.881108] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  534. [ OK ] Reached target System Initialization.
  535. [ OK ] Listening on lircd.socket.
  536. [ OK ] Started Daily Cleanup of Temporary Directories.
  537. [ OK ] Listening on D-Bus System Message Bus Socket.
  538. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  539. [ OK ] Reached target Sockets.
  540. [ OK ] Reached target Basic System.
  541. Starting System Logging Service...
  542. Starting LSB: Armbian gathering hardware information...
  543. Starting Login Service...
  544. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  545. Starting lircd(8) initialization helper tool...
  546. [ OK ] Started Convert IR remotes button p?[ 15.072499] br0: port 1(lan0) entered blocking state
  547. .|ses to mouse movements and clicks.
  548. [ 15.096294] br0: port 1(lan0) entered disabled state
  549. [ 15.115988] device lan0 entered promiscuous mode
  550. [ 15.123782] device eth0 entered promiscuous mode
  551. [ OK ] Started Regular background program processing daemon.
  552. [ OK ] Started Handle events from IR remotes decoded by lircd(8).
  553. [ OK ] Started D-Bus System Message Bus.
  554. [ 15.209317] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  555. [ 15.419349] br0: port 2(lan1) entered blocking state
  556. [ 15.443875] br0: port 2(lan1) entered disabled state
  557. [ 15.493073] device lan1 entered promiscuous mode
  558. Starting Network Manager...
  559. Starting Avahi mDNS/DNS-SD Stack...
  560. Starting LSB: Start/stop sysstat's sadc...
  561. [ OK ] Started System Logging Service.
  562. [ 15.698914] br0: port 3(wan) entered blocking state
  563. [ 15.709583] br0: port 3(wan) entered disabled state
  564. [ 15.756926] device wan entered promiscuous mode
  565. [ OK ] Started LSB: Start/stop sysstat's sadc.
  566. [ 15.850757] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
  567. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  568. [ OK ] Started Login Service.
  569. [ OK ] Started ifup for eth0.
  570. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  571. Starting LSB: set CPUFreq kernel parameters...
  572. [ OK ] Started LSB: set CPUFreq kernel parameters.
  573. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  574. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  575. [ 16.512579] mvneta d0030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  576. [ 16.521494] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  577. [ OK ] Started lircd(8) initialization helper tool.
  578. [ OK ] Found device /sys/subsystem/net/devices/lan1.
  579. [ OK ] Started ifup for lan1.
  580. [ OK ] Started Network Manager.
  581. Starting Network Manager Script Dispatcher Service...
  582. Starting Network Manager Wait Online...
  583. [ OK ] Started Network Manager Script Dispatcher Service.
  584. [ 16.829464] dsa dsa@0 lan0: Link is Down
  585. [ 16.839299] dsa dsa@0 lan1: Link is Down
  586. Starting Hostname Service...
  587. [ OK ] Found device /sys/subsystem/net/devices/lan0.
  588. [ OK ] Started ifup for lan0.
  589. [ OK ] Started Hostname Service.
  590. Starting Authorization Manager...
  591. [ OK ] Started Network Manager Wait Online.
  592. [ OK ] Started Authorization Manager.
  593. [ 17.805809] dsa dsa@0 wan: Link is Up - 1Gbps/Full - flow control off
  594. [ 17.825404] br0: port 3(wan) entered blocking state
  595. [ 17.830331] br0: port 3(wan) entered forwarding state
  596. [ 17.839148] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
  597. [ OK ] Started LSB: Armbian gathering hardware information.
  598. [ OK ] Started Raise network interfaces.
  599. [ OK ] Reached target Network.
  600. Starting Netatalk AFP fileserver for Macintosh clients...
  601. Starting Permit User Sessions...
  602. [ OK ] Reached target Network is Online.
  603. [ OK ] Started Daily apt download activities.
  604. [ OK ] Started Daily apt upgrade and clean activities.
  605. [ OK ] Reached target Timers.
  606. Starting LSB: Start NTP daemon...
  607. Starting LSB: disk temperature monitoring daemon...
  608. Starting LSB: Advanced IEEE 802.11 management daemon...
  609. Starting OpenBSD Secure Shell server...
  610. [ OK ] Started Flexible IR remote input/output application support.
  611. [ OK ] Started Forward LIRC button presses[ 19.087244] random: nonblocking pool is initialized
  612. as uinput events.
  613. [ OK ] Started Unattended Upgrades Shutdown.
  614. [ OK ] Started Permit User Sessions.
  615. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  616. [ OK ] Started Netatalk AFP fileserver for Macintosh clients.
  617. [ OK ] Started OpenBSD Secure Shell server.
  618. [ OK ] Started LSB: disk temperature monitoring daemon.
  619. [ OK ] Started Serial Getty on ttyS0.
  620. [ OK ] Started Serial Getty on ttyMV0.
  621. [ OK ] Started Getty on tty1.
  622. [ OK ] Reached target Login Prompts.
  623. [ OK ] Started LSB: Start NTP daemon.
  624. [ OK ] Reached target Multi-User System.
  625. [ OK ] Reached target Graphical Interface.
  626. Starting Update UTMP about System Runlevel Changes...
  627. [ OK ] Started Update UTMP about System Runlevel Changes.
  628.  
  629. Debian GNU/Linux 9 espressobin ttyMV0
  630.  
  631. espressobin login: root
  632. Password:
  633. Last login: Sat Aug 19 11:01:39 CEST 2017 on ttyMV0
  634. _____ _ _
  635. | ____|___ _ __ _ __ ___ ___ ___ ___ | |__ (_)_ __
  636. | _| / __| '_ \| '__/ _ \/ __/ __|/ _ \| '_ \| | '_ \
  637. | |___\__ \ |_) | | | __/\__ \__ \ (_) | |_) | | | | |
  638. |_____|___/ .__/|_| \___||___/___/\___/|_.__/|_|_| |_|
  639. |_|
  640.  
  641. Welcome to ARMBIAN 5.32.170817 nightly Debian GNU/Linux 9 (stretch) 4.4.82-mvebu64
  642. System load: 1.92 0.49 0.16 Up time: 0 min
  643. Memory usage: 5 % of 926MB IP:
  644. Usage of /: 10% of 15G
  645.  
  646.  
  647. root@espressobin:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!