; K-Factor Test
;
; Created: Sat Nov 18 2017 10:56:43 GMT+0100 (Mitteleuropäische Zeit)
; Settings:
; Filament Diameter = 1.75
; Nozzle Diameter = 0.4
; Nozzle Temperature = 230
; Nozzle / Line Ratio = 1.2
; Bed Temperature = 75
; Slow Printing Speed = 600
; Fast Printing Speed = 600
; Movement Speed = 3600
; Use UBL = false
; Retraction Distance = 0
; Bed Size X = 200
; Bed Size Y = 200
; Layer Height = 0.3
; Extrusion Multiplier = 1
; Starting Value K-Factor = 150
; Ending value K-Factor = 250
; K-Factor Stepping = 10
;
M420 S1 ;MBL ACTIVATION
G28 ; home all axes
M190 S75 ; set and wait for bed temp
M104 S230 ; set nozzle temp and continue
M109 S230 ; block waiting for nozzle temp
G21 ; set units to millimetres
M204 S500 ; lower acceleration to 500mm/s2 during the test
M83 ; use relative distances for extrusion
G90 ; use absolute coordinates
;
; go to layer height and prime nozzle on a line to the left
;
G1 X20 Y62.5 F3600
G1 Z0.3 F600
G1 X20 Y162.5 E10 F600 ; extrude some to start clean
G1 E-0
;
; start the test (all values are relative coordinates)
;
G1 X60 Y62.5 F3600 ; move to pattern start
G91 ; use relative coordinates
M900 K150 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K160 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K170 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K180 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K190 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K200 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K210 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K220 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K230 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K240 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
M900 K250 ; set K-factor
G1 E0
G1 X20 Y0 E1.19736 F600
G1 X40 Y0 E2.39473 F600
G1 X20 Y0 E1.19736 F600
G1 E-0
G1 X-80 Y5 F3600
;
; mark the test area for reference
;
G1 X20 Y0 F3600
G1 E0
G1 X0 Y20 E1.19736 F600
G1 E-0
G1 X40 Y-20 F3600
G1 E0
G1 X0 Y20 E1.19736 F600
G1 E-0
;
; finish
;
G4 ; wait
M104 S0 ; turn off hotend
M140 S0 ; turn off bed
G90 ; use absolute coordinates
G1 X0 Z20 Y200 F3600 ; move away from the print
M84 ; disable motors
M502 ; resets parameters from ROM (for those who do not have an EEPROM)
M501 ; resets parameters from EEPROM (preferably)
;