API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 20th, 2017
386
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 52.19 KB | None | 0 0
raw download clone embed print report
  1. [ 1.577513] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
  2. [ 1.737363] Registered UART port ttyHS2
  3. [ 1.737508] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
  4. [ 1.897363] Registered UART port ttyHS3
  5. [ 1.897509] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
  6. [ 2.057365] Registered UART port ttyHS4
  7. [ 2.057524] Initialized tegra uart driver
  8. [ 2.060480] loop: module loaded
  9. [ 2.060640] i2c-core: driver [apds9802als] using legacy suspend method
  10. [ 2.060776] i2c-core: driver [apds9802als] using legacy resume method
  11. [ 2.060983] nct1008_probe+
  12. [ 2.061072] nct1008 4-004c: no regulator found for vdd. Assuming vdd is always powered
  13. [ 2.063467] nct1008 register misc device for I2C stress test rc=0
  14. [ 2.063725] nct1008 4-004c: nct1008_probe: initialized
  15. [ 2.064870] nct1008_get_temp: ret temp=36C
  16. [ 2.065219] nct1008_probe-
  17. [ 2.065328] i2c-core: driver [nct1008] using legacy suspend method
  18. [ 2.065463] i2c-core: driver [nct1008] using legacy resume method
  19. [ 2.065607] bcm4330_rfkill_probe: can't find bcm4330_32k_clk. assuming 32k clock to chip
  20. [ 2.065743] bcm4330_rfkill_probe : can't find reset gpio.
  21. [ 2.065983] vibrator_init:Couldn't get regulator vdd_vbrtr
  22. [ 2.066163] Loading pn544 driver
  23. [ 2.066381] pn544_probe : requesting IRQ 408
  24. [ 2.066763] PPP generic driver version 2.4.2
  25. [ 2.066985] PPP Deflate Compression module registered
  26. [ 2.067062] PPP BSD Compression module registered
  27. [ 2.067915] PPP MPPE Compression module registered
  28. [ 2.067997] NET: Registered protocol family 24
  29. [ 2.068135] tun: Universal TUN/TAP device driver, 1.6
  30. [ 2.068207] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  31. [ 2.068542] usbcore: registered new interface driver asix
  32. [ 2.068648] usbcore: registered new interface driver cdc_ether
  33. [ 2.068821] usbcore: registered new interface driver smsc95xx
  34. [ 2.068924] usbcore: registered new interface driver rndis_host
  35. [ 2.069087] usbcore: registered new interface driver cdc_subset
  36. [ 2.069179] cdc_ncm: 04-Aug-2011
  37. [ 2.069285] usbcore: registered new interface driver cdc_ncm
  38. [ 2.069459] usbcore: registered new interface driver bb_raw_ip_net
  39. [ 2.069640] usbcore: registered new interface driver rndis_wlan
  40. [ 2.069726] smb347_charger: [smb347_init] project_id=0, pcba_ver=3, dock_in_gpio=164
  41. [ 2.073062] [charger] Disable AICL, retval=93 setting=83
  42. [ 2.073466] [charger] set cahrger limmit, limit=900 retval =73 setting=73
  43. [ 2.073927] [charger] re-enable AICL, setting=93
  44. [ 2.098218] GPIO pin irq 388 requested ok, smb347_DOCK_IN# = H
  45. [ 2.098358] Wake1 for irq=393
  46. [ 2.098457] GPIO pin irq 393 requested ok, smb347_INOK = L
  47. [ 2.098567] i2c-core: driver [smb347] using legacy suspend method
  48. [ 2.098701] i2c-core: driver [smb347] using legacy resume method
  49. [ 2.098864] bq27541_probe + client->addr= 55
  50. [ 2.100136] is_legal_pack device name: ME370
  51. [ 2.100863] bq27541_get_psp status: Discharging ret= 0x0181
  52. [ 2.101579] bq27541_get_psp voltage_now= 3792000 uV
  53. [ 2.102226] bq27541_get_capacity = 45% ret= 49
  54. [ 2.102937] bq27541_get_psp temperature= 270 (0.1\xffffffa2XC)
  55. [ 2.104141] bq27541_get_psp current = -257 mA
  56. [ 2.104799] Wake25 for irq=372
  57. [ 2.104968] bq27541_get_psp status: Discharging ret= 0x0181
  58. [ 2.105109] setup_low_battery_irq irq=372, LL_BAT_T30=0
  59. [ 2.105291] Wake25 for irq=372
  60. [ 2.105363] Enabling wake25
  61. [ 2.105437] gpio bank wake found: wake25 for irq=87
  62. [ 2.105567] Enabling wake25
  63. [ 2.105666] bq27541_get_psp voltage_now= 3792000 uV
  64. [ 2.105767] The USB cable status = 0
  65. [ 2.105902] bq27541_probe - bq27541-battery driver registered
  66. [ 2.106052] i2c-core: driver [bq27541-battery] using legacy suspend method
  67. [ 2.106185] i2c-core: driver [bq27541-battery] using legacy resume method
  68. [ 2.106266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  69. [ 2.106430] bq27541_get_capacity = 45% ret= 49
  70. [ 2.110666] Timed out waiting for lock bit on pll pll_u
  71. [ 2.111224] bq27541_get_psp temperature= 270 (0.1\xffffffa2XC)
  72. [ 2.112644] bq27541_get_psp current = -289 mA
  73. [ 2.114848] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  74. [ 2.115007] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  75. [ 2.137391] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
  76. [ 2.157374] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  77. [ 2.157565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  78. [ 2.157642] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  79. [ 2.157776] usb usb1: Product: Tegra EHCI Host Controller
  80. [ 2.157909] usb usb1: Manufacturer: Linux 3.1.10-gae44e9b-dirty ehci_hcd
  81. [ 2.157982] usb usb1: SerialNumber: tegra-ehci.1
  82. [ 2.158472] hub 1-0:1.0: USB hub found
  83. [ 2.158558] hub 1-0:1.0: 1 port detected
  84. [ 2.158901] Wake40 for irq=53
  85. [ 2.158976] Enabling wake40
  86. [ 2.159270] usbcore: registered new interface driver cdc_acm
  87. [ 2.159345] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  88. [ 2.159513] usbcore: registered new interface driver cdc_wdm
  89. [ 2.159588] Initializing USB Mass Storage driver...
  90. [ 2.159784] usbcore: registered new interface driver usb-storage
  91. [ 2.159857] USB Mass Storage support registered.
  92. [ 2.160052] usbcore: registered new interface driver libusual
  93. [ 2.160214] usbcore: registered new interface driver usbserial
  94. [ 2.160347] usbserial: USB Serial Driver core
  95. [ 2.163302] usbcore: registered new interface driver baseband_usb_58b_41_1
  96. [ 2.163472] USB Serial support registered for GSM modem (1-port)
  97. [ 2.163628] usbcore: registered new interface driver option
  98. [ 2.163761] option: v0.7.2:USB Driver for GSM modems
  99. [ 2.163858] USB Serial support registered for pl2303
  100. [ 2.164038] usbcore: registered new interface driver pl2303
  101. [ 2.164111] pl2303: Prolific PL2303 USB to serial adaptor driver
  102. [ 2.164243] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  103. [ 2.164317] read_hw_version project_id = 0X0, pcb_id = 0X3
  104. [ 2.164617] phy->instance = 0, phy->xcvr_setup_value = 57
  105. [ 2.164707] create_regulator: fixed_reg_en_avdd_hdmi_usb_a01: Failed to create debugfs directory
  106. [ 2.164842] tegra_usb_phy_open instance 0 MAX77663_IRQ_ACOK_RISING
  107. [ 2.167692] fsl-tegra-udc fsl-tegra-udc: usb_bat_chg regulator not registered: USB charging will not be enabled
  108. [ 2.187389] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
  109. [ 2.187467] fsl_vbus_session(): vbus_active = 0 and is_active = 1
  110. [ 2.189992] android_usb gadget: Mass Storage Function, version: 2009/09/11
  111. [ 2.190071] android_usb gadget: Number of LUNs=1
  112. [ 2.190206] lun0: LUN: removable file: (no medium)
  113. [ 2.190511] Gadget Android: controller 'fsl-tegra-udc' not recognized
  114. [ 2.190653] android_usb gadget: android_usb ready
  115. [ 2.190728] fsl-tegra-udc: bind to driver android_usb
  116. [ 2.190949] usbcore: registered new interface driver xpad
  117. [ 2.191126] usbcore: registered new interface driver usb_acecad
  118. [ 2.191201] acecad: v3.2:USB Acecad Flair tablet driver
  119. [ 2.191368] usbcore: registered new interface driver aiptek
  120. [ 2.191441] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  121. [ 2.191573] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  122. [ 2.191745] usbcore: registered new interface driver gtco
  123. [ 2.191819] GTCO usb driver version: 2.00.0006
  124. [ 2.191984] usbcore: registered new interface driver hanwang
  125. [ 2.192155] usbcore: registered new interface driver kbtab
  126. [ 2.192288] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  127. [ 2.192397] usbcore: registered new interface driver wacom
  128. [ 2.192530] wacom: v1.52:USB Wacom tablet driver
  129. [ 2.192602] [ektf3k]:[elan] elan_ktf3k_ts_init
  130. [ 2.192762] [ektf3k]:[ELAN] Start HW reset!
  131. [ 2.447372] [ektf3k]:The boot code is new!
  132. [ 2.597370] INOK=L
  133. [ 2.597637] smb347_charger: [cable_type_detect] Reg39 : 0x10
  134. [ 2.597955] smb347_charger: [cable_type_detect] Reg3F : 0xc0
  135. [ 2.598031] smb347_charger: [cable_type_detect] USB_IN
  136. [ 2.598347] smb347_charger: [cable_type_detect] Reg3E : 0x0c
  137. [ 2.598420] Cable: SDP
  138. [ 2.598492] ========================================================
  139. [ 2.598622] battery_callback usb_cable_state = 1
  140. [ 2.598695] ========================================================
  141. [ 2.598827] battery_callback cable_wake_lock 5 sec...
  142. [ 2.598831]
  143. [ 3.187368] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
  144. [ 3.187510] USB device controller was not ready
  145. [ 3.257519] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
  146. [ 3.257595] [ektf3k]:[elan] hello packet's rc = 0
  147. [ 3.469207] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xb018
  148. [ 3.471118] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x0078
  149. [ 3.473083] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00c6
  150. [ 3.493256] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3021
  151. [ 3.493395] [ektf3k]:[Elan] Max X=2111, Max Y=1279
  152. [ 3.493601] input: elan-touchscreen as /devices/virtual/input/input0
  153. [ 3.493929] [ektf3k]:The firmware was version 0xB018 and id:0x3021
  154. [ 3.494028] [ektf3k]: /proc/ektf_dbg created
  155. [ 3.494392] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
  156. [ 3.494632] [ektf3k]:[ELAN]misc_register finished!!
  157. [ 3.494710] elan-ktf3k 1-0010: Update power source to 1
  158. [ 3.495075] in function ____rmi_bus_init____
  159. [ 3.495238] rmi_bus_init: successfully registered RMI bus.
  160. [ 3.495351] rmi_spi_init: registering synaptics spi driver (ref=124)
  161. [ 3.495483] driver.owner = 0x0
  162. [ 3.495556] driver.name = rmi_spi
  163. [ 3.495687] id_table[0].name = rmi
  164. [ 3.495759] id_table[1].name = rmi_spi
  165. [ 3.495890] probe function ptr = 0xc06a0994
  166. [ 3.495983] in function ____rmi_register_driver____
  167. [ 3.496142] in function ____rmi_get_function_handler____
  168. [ 3.496216] in function ____rmi_get_function_handler____
  169. [ 3.496350] in function ____rmi_get_function_handler____
  170. [ 3.496423] in function ____rmi_get_function_handler____
  171. [ 3.496496] in function ____rmi_get_function_handler____
  172. [ 3.496628] in function ____rmi_get_function_handler____
  173. [ 3.497018] lid_init+ #####
  174. [ 3.497154] hall_sensor: [lid_init] start LID init.....
  175. [ 3.497483] input: lid_input as /devices/virtual/input/input1
  176. [ 3.497795] Wake28 for irq=374
  177. [ 3.497908] Wake28 for irq=374
  178. [ 3.497982] Enabling wake28
  179. [ 3.498057] CAP1106: [cap1106_init] Cap1106 driver doesn't support this project
  180. [ 3.528211] using rtc device, max77663-rtc, for alarms
  181. [ 3.528361] max77663-rtc max77663-rtc.0: rtc core: registered max77663-rtc as rtc0
  182. [ 3.528915] i2c /dev entries driver
  183. [ 3.529680] Linux video capture interface: v2.00
  184. [ 3.529832] usbcore: registered new interface driver uvcvideo
  185. [ 3.529907] USB Video Class driver (1.1.1)
  186. [ 3.530159] trpc_sema_init: registered misc dev 10:45
  187. [ 3.530336] trpc_node_register: Adding 'local' to node list
  188. [ 3.531485] nvavp nvavp: allocated IOVM at ff00000 for AVP os
  189. [ 3.531864] tegra_camera tegra_camera: tegra_camera_probe
  190. [ 3.532292] sensor_init+ #####
  191. [ 3.532394] mi1040 sensor_probe
  192. [ 3.532630] sensor_init- #####
  193. [ 3.532862] al3010_init+ #####
  194. [ 3.532935] light sensor info : al3010 init
  195. [ 3.533761] light sensor info : al3010 probe successed
  196. [ 3.533897] al3010 2-001c: driver version 1.0 enabled
  197. [ 3.534171] i2c-core: driver [al3010] using legacy suspend method
  198. [ 3.534307] i2c-core: driver [al3010] using legacy resume method
  199. [ 3.534387] al3010_init- #####
  200. [ 3.534778] device-mapper: uevent: version 1.0.3
  201. [ 3.535093] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
  202. [ 3.535258] Bluetooth: HCI UART driver ver 2.2
  203. [ 3.535333] Bluetooth: HCI H4 protocol initialized
  204. [ 3.535405] Bluetooth: HCILL protocol initialized
  205. [ 3.535538] Bluetooth: BlueSleep Mode Driver Ver 1.1
  206. [ 3.535663] Wake7 for irq=390
  207. [ 3.536293] cpuidle: using governor ladder
  208. [ 3.536721] cpuidle: using governor menu
  209. [ 3.536841] sdhci: Secure Digital Host Controller Interface driver
  210. [ 3.536973] sdhci: Copyright(c) Pierre Ossman
  211. [ 3.537044] sdhci-pltfm: SDHCI platform and OF driver helper
  212. [ 3.537174] sdhci_tegra_init+ #####
  213. [ 3.537340] sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
  214. [ 3.538514] mmc0: Invalid maximum block size, assuming 512 bytes
  215. [ 3.539720] Registered led device: mmc0::
  216. [ 3.543156] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  217. [ 3.543289] sdhci-tegra sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
  218. [ 3.544440] mmc1: Invalid maximum block size, assuming 512 bytes
  219. [ 3.545632] Registered led device: mmc1::
  220. [ 3.547928] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  221. [ 3.548042] sdhci_tegra_init- #####
  222. [ 3.548414] Registered led device: statled
  223. [ 3.549595] tegra-se tegra-se: tegra_se_probe: complete
  224. [ 3.551312] usbcore: registered new interface driver usbhid
  225. [ 3.551454] usbhid: USB HID core driver
  226. [ 3.551878] logger: created 256K log 'log_main'
  227. [ 3.552131] logger: created 256K log 'log_events'
  228. [ 3.552309] logger: created 256K log 'log_radio'
  229. [ 3.552538] logger: created 256K log 'log_system'
  230. [ 3.619091] [mmc]:mmc_decode_cid:113 cid.prv 0x26
  231. [ 3.630703] [mmc]:mmc_read_ext_csd:285 ext_csd.sectors 0xe3e000 prod_name MMC08G BOOT_MULTI 0x10
  232. [ 3.634664] mmc0: new high speed DDR MMC card at address 0001
  233. [ 3.634930] mmcblk mmc0:0001: Card claimed for testing.
  234. [ 3.635252] mmcblk0: mmc0:0001 MMC08G 7.12 GiB
  235. [ 3.635545] mmcblk0boot0: mmc0:0001 MMC08G partition 1 2.00 MiB
  236. [ 3.635775] mmcblk0boot1: mmc0:0001 MMC08G partition 2 2.00 MiB
  237. [ 3.639773] Primary GPT is invalid, using alternate GPT.
  238. [ 3.639890] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
  239. [ 3.643612] mmcblk0boot1: unknown partition table
  240. [ 3.646073] mmcblk0boot0: unknown partition table
  241. [ 3.646333] [mmc]:mmc_rescan_try_freq:1907 mmc0: eMMC completed
  242. [ 3.795387] inv-mpu-iio 2-0068: mpu6050 is ready to go!
  243. [ 3.795580] i2c-core: driver [LTR_558ALS] using legacy suspend method
  244. [ 3.795714] i2c-core: driver [LTR_558ALS] using legacy resume method
  245. [ 3.796623] inv_ami306_probe: Probe name ami306
  246. [ 3.796789] RIL: [ril_init] RIL init
  247. [ 3.796863] RIL: [ril_init] Ril driver doesn't support this project
  248. [ 4.297370] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  249. [ 4.337866] usbcore: registered new interface driver snd-usb-audio
  250. [ 4.338371] rt5640_modinit
  251. [ 4.338474] rt5640_i2c_probe
  252. [ 4.477865] DSP version code = 0x501a
  253. [ 4.478163] ************************realtek_ce_init_hwdep*************************************
  254. [ 4.478249] do_rt5640_dsp_set_mode mode=0
  255. [ 4.478391] rt5640 4-001c: w->name=SDI1 TX Mux
  256. [ 4.478465] rt5640 4-001c: path->name=IF2 path->connect=0
  257. [ 4.478596] rt5640 4-001c: path->name=IF1 path->connect=1
  258. [ 4.478716] rt5640 4-001c: w->name=Stereo DAC MIXL
  259. [ 4.478851] rt5640 4-001c: path->name=DAC L1 Switch connect=1
  260. [ 4.478955] rt5640 4-001c: w->name=Stereo DAC MIXL
  261. [ 4.479031] rt5640 4-001c: path->name=DAC L2 Switch connect=0
  262. [ 4.479351] rt5640 4-001c: w->name=Stereo DAC MIXR
  263. [ 4.479429] rt5640 4-001c: path->name=DAC R1 Switch connect=1
  264. [ 4.479594] rt5640 4-001c: w->name=Stereo DAC MIXR
  265. [ 4.479670] rt5640 4-001c: path->name=DAC R2 Switch connect=0
  266. [ 4.479991] rt5640 4-001c: w->name=Stereo ADC MIXL
  267. [ 4.480069] rt5640 4-001c: path->name=ADC1 Switch connect=1
  268. [ 4.480235] rt5640 4-001c: w->name=Stereo ADC MIXR
  269. [ 4.480313] rt5640 4-001c: path->name=ADC1 Switch connect=1
  270. [ 4.480475] rt5640 4-001c: w->name=Stereo ADC MIXL
  271. [ 4.480550] rt5640 4-001c: path->name=ADC2 Switch connect=1
  272. [ 4.480711] rt5640 4-001c: w->name=Stereo ADC MIXR
  273. [ 4.480787] rt5640 4-001c: path->name=ADC2 Switch connect=1
  274. [ 4.480888] rt5640 4-001c: w->name=Mono ADC MIXL
  275. [ 4.481023] rt5640 4-001c: path->name=ADC2 Switch connect=0
  276. [ 4.481125] rt5640 4-001c: w->name=Mono ADC MIXR
  277. [ 4.481256] rt5640 4-001c: path->name=ADC2 Switch connect=0
  278. [ 4.488479] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
  279. [ 4.490976] asoc: dit-hifi <-> tegra30-spdif mapping ok
  280. [ 4.494851] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
  281. [ 4.496154] headset_init+ #####
  282. [ 4.496229] HEADSET: Headset detection init
  283. [ 4.496555] HEADSET: Headset detection mode
  284. [ 4.496690] HEADSET: Config LineOut detection gpio
  285. [ 4.496767] gpio_request: gpio-179 (lineout_int) status -16
  286. [ 4.496902] HEADSET: Config Headset Button detection gpio
  287. [ 4.496976] gpio_request: gpio-186 (btn_INT) status -16
  288. [ 4.497107] HEADSET: Config uart<->headphone gpio
  289. [ 4.497179] HEADSET: Config Jack-in detection gpio
  290. [ 4.497252] HEADSET: Turn on micbias power
  291. [ 4.497409] Wake12 for irq=402
  292. [ 4.497537] Wake12 for irq=402
  293. [ 4.497612] Enabling wake12
  294. [ 4.497743] gpio bank wake found: wake12 for irq=119
  295. [ 4.497812] Enabling wake12
  296. [ 4.517367] HEADSET: Turn off micbias power
  297. [ 4.517518] headset_init- #####
  298. [ 4.517590] ALSA device list:
  299. [ 4.517663] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
  300. [ 4.517795] #1: tegra-rt5640
  301. [ 4.518071] oprofile: using arm/armv7-ca9
  302. [ 4.518268] GACT probability NOT on
  303. [ 4.518346] Mirror/redirect action on
  304. [ 4.518478] u32 classifier
  305. [ 4.518548] Actions configured
  306. [ 4.518622] Netfilter messages via NETLINK v0.30.
  307. [ 4.518808] nf_conntrack version 0.5.0 (15515 buckets, 62060 max)
  308. [ 4.519141] ctnetlink v0.93: registering with nfnetlink.
  309. [ 4.519313] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  310. [ 4.519388] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  311. [ 4.519861] xt_time: kernel timezone is -0000
  312. [ 4.520086] ip_tables: (C) 2000-2006 Netfilter Core Team
  313. [ 4.520421] arp_tables: (C) 2002 David S. Miller
  314. [ 4.520539] TCP cubic registered
  315. [ 4.520745] NET: Registered protocol family 10
  316. [ 4.521505] Mobile IPv6
  317. [ 4.521601] ip6_tables: (C) 2000-2006 Netfilter Core Team
  318. [ 4.521880] IPv6 over IPv4 tunneling driver
  319. [ 4.522706] NET: Registered protocol family 17
  320. [ 4.522799] NET: Registered protocol family 15
  321. [ 4.523006] Bridge firewalling registered
  322. [ 4.523200] Bluetooth: RFCOMM TTY layer initialized
  323. [ 4.523300] Bluetooth: RFCOMM socket layer initialized
  324. [ 4.523433] Bluetooth: RFCOMM ver 1.11
  325. [ 4.523507] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  326. [ 4.523640] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  327. [ 4.523865] NET: Registered protocol family 37
  328. [ 4.524002] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  329. [ 4.524168] Registering SWP/SWPB emulation handler
  330. [ 4.532263] Do not disable PWM clock when kernel inits
  331. [ 4.532354] Disabling clocks left on by bootloader:
  332. [ 4.532485] fuse_burn
  333. [ 4.532564] cclk_lp
  334. [ 4.532637] pll_x_out0
  335. [ 4.532709] pll_d2_out0
  336. [ 4.532780] pll_d_out0
  337. [ 4.532911] pll_p_out2
  338. [ 4.532986] pll_c_out1
  339. [ 4.533061] pll_m_out1
  340. [ 4.533232] CPU rate: 1000 MHz
  341. [ 4.533408] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  342. [ 4.533918] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
  343. [ 4.534116] tegra dvfs: tegra sysfs cap interface is initialized
  344. [ 4.534455] tegra_actmon.emc: Completed initialization (0)
  345. [ 4.534747] tegra_actmon.avp: Completed initialization (0)
  346. [ 4.536180] regulator_init_complete: fixed_reg_cdc_en: incomplete constraints, leaving on
  347. [ 4.536327] regulator_init_complete: max77663_ldo8: incomplete constraints, leaving on
  348. [ 4.536464] regulator_init_complete: max77663_ldo4: incomplete constraints, leaving on
  349. [ 4.536770] ## wifi_probe
  350. [ 4.536907] wifi_set_power = 1
  351. [ 4.536979] Powering on wifi
  352. [ 4.604331] bq27541_get_psp status: Charging ret= 0x0181
  353. [ 4.605038] bq27541_get_psp voltage_now= 3775000 uV
  354. [ 4.605681] bq27541_get_capacity = 45% ret= 49
  355. [ 4.606326] bq27541_get_psp temperature= 270 (0.1\xffffffa2XC)
  356. [ 4.607579] bq27541_get_psp current = -170 mA
  357. [ 4.747652] smb347_charger: [smb347_config_thermal_charging] temp=27
  358. [ 4.748270] smb347_charger: [smb347_config_thermal_charging] Bypass charger enable
  359. [ 4.842988] wifi_set_carddetect = 1
  360.  
  361. [ 4.843219] Dongle Host Driver, version 5.90.195.114
  362. [ 4.843223] Compiled in drivers/net/wireless/bcmdhd on Dec 17 2017 at 14:58:43
  363. [ 4.891441] mmc1: new high speed SDIO card at address 0001
  364. [ 4.892285] F1 signature read @0x18000000=0x16044330
  365. [ 4.895775] DHD: dongle ram size is set to 294912(orig 294912)
  366. [ 4.896393] wl_create_event_handler thr:6c started
  367. [ 4.897244] p2p0: P2P Interface Registered
  368. [ 4.897414] dhd_attach thr:6d started
  369. [ 4.897612] dhd_attach thr:6e started
  370. [ 4.897749] dhd_attach thr:6f started
  371. [ 4.897870] dhd_attach thr:70 started
  372. [ 4.898557] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  373. [ 4.898651] wifi_set_power = 0
  374. [ 4.898659] [mmc]:mmc_rescan_try_freq:1903 mmc1: sdio completed
  375. [ 4.898861] Powering off wifi
  376. [ 5.199281] =========== WLAN placed in RESET ========
  377. [ 5.199503] Wake24 for irq=392
  378. [ 5.199865] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
  379. [ 5.214802] max77663-rtc max77663-rtc.0: setting system clock to 2017-12-20 11:09:53 UTC (1513768193)
  380. [ 5.214993] Warning: unable to open an initial console.
  381. [ 5.215327] Freeing init memory: 280K
  382. [ 7.605009] EXT3-fs (mmcblk0p9): error: couldn't mount because of unsupported optional features (40)
  383. [ 7.658254] EXT2-fs (mmcblk0p9): error: couldn't mount because of unsupported optional features (44)
  384. [ 7.872786] EXT4-fs (mmcblk0p9): recovery complete
  385. [ 7.876125] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
  386. [ 8.226690] android_usb: already disabled
  387. [ 8.236212] rndis_function_bind_config MAC: 00:00:00:00:00:00
  388. [ 8.236408] android_usb gadget: using random self ethernet address
  389. [ 8.236491] android_usb gadget: using random host ethernet address
  390. [ 8.237148] rndis0: MAC e2:e3:57:73:6b:1e
  391. [ 8.237226] rndis0: HOST MAC a6:25:eb:36:f3:74
  392. [ 8.245123] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  393. [ 8.607372] android_work: did not send uevent (0 0 (null))
  394. [ 8.685831] android_work: sent uevent USB_STATE=CONNECTED
  395. [ 8.689418] android_work: sent uevent USB_STATE=DISCONNECTED
  396. [ 8.785599] android_work: sent uevent USB_STATE=CONNECTED
  397. [ 8.799552] set_config : usb set config wake lock ++
  398. [ 8.799691] android_usb gadget: high speed config #1: android
  399. [ 8.800268] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  400. [ 8.800558] android_work: sent uevent USB_STATE=CONFIGURED
  401. [ 9.217402] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
  402. [ 9.217541] The USB cable is connected
  403. [ 9.217614] smb347_charger: [usb_det_cable_callback] usb_det_cable_type=1
  404. [ 9.217752] elan-ktf3k 1-0010: Update power source to 1
  405. [ 9.455227] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
  406. [ 9.496174] preinit: (9.49) Welcome to SailfishOS 2.1.3.7 (Kymijoki) (armv7hl)
  407. [ 9.496915] preinit: (9.49) "Magic Close" /dev/watchdog with character 'V'
  408. [ 9.531077] preinit: (9.53) is_erase_needed: No : 0
  409. [ 9.583970] preinit: (9.58) get_bootstate: USER : 0
  410. [ 9.584775] preinit: (9.58) BOOTSTATE = USER
  411. [ 9.586367] preinit: (9.58) Booting to default.target
  412. [ 11.127587] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  413. [ 11.127945] systemd[1]: Detected architecture arm.
  414. [ 11.129157] systemd[1]: Set hostname to <Sailfish>.
  415. [ 11.481142] systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  416. [ 11.541583] systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
  417. [ 11.545078] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  418. [ 11.545341] systemd[1]: Reached target Swap.
  419. [ 11.545783] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  420. [ 11.545947] systemd[1]: Reached target Login Prompts.
  421. [ 11.546586] systemd[1]: Created slice Root Slice.
  422. [ 11.546848] systemd[1]: Listening on udev Kernel Socket.
  423. [ 11.547179] systemd[1]: Listening on udev Control Socket.
  424. [ 11.547765] systemd[1]: Created slice User and Session Slice.
  425. [ 11.571673] systemd[1]: Listening on Journal Socket.
  426. [ 11.572023] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  427. [ 11.572315] systemd[1]: Listening on Journal Socket (/dev/log).
  428. [ 11.572919] systemd[1]: Created slice System Slice.
  429. [ 11.747874] systemd[1]: Starting Setup Virtual Console...
  430. [ 11.748078] systemd[1]: Reached target Slices.
  431. [ 12.327801] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  432. [ 13.447545] systemd[1]: Mounting Debug File System...
  433. [ 13.447992] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
  434. [ 14.557563] systemd[1]: Mounting Temporary Directory...
  435. [ 15.687789] systemd[1]: Starting Journal Service...
  436. [ 16.877789] systemd[1]: Starting Remount Root and Kernel File Systems...
  437. [ 17.557873] systemd-journald[358]: Failed to register hostname fd in event loop: Operation not permitted. Ignoring.
  438. [ 18.007572] systemd[1]: Mounting FFS mount...
  439. [ 18.671417] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
  440. [ 18.857354] rndis0: no IPv6 routers present
  441. [ 19.149479] systemd[1]: Mounted Debug File System.
  442. [ 19.149841] systemd[1]: Mounted Temporary Directory.
  443. [ 19.150693] systemd[1]: Started Journal Service.
  444. [ 27.917557] systemd-journald[358]: Received request to flush runtime journal from PID 1
  445. [ 28.008124] bq27541_get_psp status: Charging ret= 0x0181
  446. [ 28.008844] bq27541_get_psp voltage_now= 3793000 uV
  447. [ 28.009487] bq27541_get_capacity = 45% ret= 49
  448. [ 28.010134] bq27541_get_psp temperature= 270 (0.1\xffffffa2XC)
  449. [ 28.011332] bq27541_get_psp current = -32 mA
  450. [ 28.068185] bq27541_get_psp status: Charging ret= 0x0181
  451. [ 28.068904] bq27541_get_psp voltage_now= 3793000 uV
  452. [ 28.069545] bq27541_get_capacity = 45% ret= 49
  453. [ 28.070245] bq27541_get_psp temperature= 270 (0.1\xffffffa2XC)
  454. [ 28.071450] bq27541_get_psp current = -32 mA
  455. [ 32.400343] bq27541_get_psp status: Charging ret= 0x0181
  456. [ 32.401068] bq27541_get_psp voltage_now= 3793000 uV
  457. [ 32.401802] bq27541_get_capacity = 45% ret= 49
  458. [ 32.403564] bq27541_get_psp temperature= 270 (0.1\xffffffa2XC)
  459. [ 32.404818] bq27541_get_psp current = -59 mA
  460. [ 33.622251] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  461. [ 42.237369] shutdown_enable_set bq27541_device->shutdown_disable = 0
  462. [ 42.992232] request_suspend_state: wakeup (3->0) at 42994881002 (2017-12-20 11:10:31.266234001 UTC)
  463.  
  464. #at this point the google logo goes away, the screen goes black, telnet shuts off, and then telnet starts up again at the black screen (backlight is on though), here is the output of "dmesg" at black screen:
  465.  
  466. FLUSH to clear up
  467. [ 39.286821] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  468. [ 39.296812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  469. [ 39.306874] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  470. [ 39.318363] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  471. [ 39.327343] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  472. [ 39.336814] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  473. [ 39.346907] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  474. [ 39.356867] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  475. [ 39.367253] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  476. [ 39.378676] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  477. [ 39.386836] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  478. [ 39.396810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  479. [ 39.406804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  480. [ 39.416832] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  481. [ 39.426833] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  482. [ 39.436842] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  483. [ 39.446821] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  484. [ 39.456810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  485. [ 39.466813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  486. [ 39.476841] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  487. [ 39.486861] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  488. [ 39.496832] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  489. [ 39.506828] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  490. [ 39.516812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  491. [ 39.526813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  492. [ 39.536890] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  493. [ 39.546812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  494. [ 39.556836] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  495. [ 39.566816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  496. [ 39.577092] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  497. [ 39.586816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  498. [ 39.596803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  499. [ 39.606807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  500. [ 39.616805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  501. [ 39.626802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  502. [ 39.636837] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  503. [ 39.646824] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  504. [ 39.656819] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  505. [ 39.666809] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  506. [ 39.676805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  507. [ 39.686807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  508. [ 39.696807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  509. [ 39.706836] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  510. [ 39.716834] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  511. [ 39.726840] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  512. [ 39.737163] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  513. [ 39.746853] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  514. [ 39.756853] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  515. [ 39.766826] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  516. [ 39.776831] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  517. [ 39.786819] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  518. [ 39.796810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  519. [ 39.806830] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  520. [ 39.816816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  521. [ 39.826811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  522. [ 39.836813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  523. [ 39.846805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  524. [ 39.856809] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  525. [ 39.866808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  526. [ 39.876811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  527. [ 39.886834] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  528. [ 39.896826] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  529. [ 39.906807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  530. [ 39.916805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  531. [ 39.926805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  532. [ 39.936824] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  533. [ 39.946810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  534. [ 39.956814] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  535. [ 39.966809] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  536. [ 39.976850] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  537. [ 39.986813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  538. [ 39.996811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  539. [ 40.006810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  540. [ 40.016846] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  541. [ 40.026847] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  542. [ 40.036942] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  543. [ 40.046839] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  544. [ 40.056854] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  545. [ 40.066816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  546. [ 40.076816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  547. [ 40.086801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  548. [ 40.096813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  549. [ 40.106807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  550. [ 40.116832] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  551. [ 40.126811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  552. [ 40.136830] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  553. [ 40.146860] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  554. [ 40.156839] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  555. [ 40.166826] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  556. [ 40.176840] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  557. [ 40.186921] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  558. [ 40.196825] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  559. [ 40.206826] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  560. [ 40.216845] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  561. [ 40.226837] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  562. [ 40.236826] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  563. [ 40.246840] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  564. [ 40.256849] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  565. [ 40.266830] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  566. [ 40.276824] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  567. [ 40.286819] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  568. [ 40.296820] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  569. [ 40.306843] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  570. [ 40.316820] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  571. [ 40.326815] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  572. [ 40.336819] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  573. [ 40.346823] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  574. [ 40.356817] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  575. [ 40.366808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  576. [ 40.376808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  577. [ 40.386828] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  578. [ 40.396820] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  579. [ 40.406809] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  580. [ 40.416802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  581. [ 40.426807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  582. [ 40.436803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  583. [ 40.446806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  584. [ 40.456803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  585. [ 40.466803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  586. [ 40.476802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  587. [ 40.486801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  588. [ 40.496801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  589. [ 40.506820] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  590. [ 40.516805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  591. [ 40.526812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  592. [ 40.536807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  593. [ 40.546807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  594. [ 40.556805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  595. [ 40.566847] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  596. [ 40.576819] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  597. [ 40.586826] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  598. [ 40.596825] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  599. [ 40.606810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  600. [ 40.616808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  601. [ 40.626814] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  602. [ 40.636808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  603. [ 40.646807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  604. [ 40.656810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  605. [ 40.666811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  606. [ 40.676811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  607. [ 40.686822] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  608. [ 40.696837] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  609. [ 40.707151] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  610. [ 40.716822] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  611. [ 40.726817] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  612. [ 40.736814] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  613. [ 40.746812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  614. [ 40.756813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  615. [ 40.766805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  616. [ 40.776804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  617. [ 40.786806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  618. [ 40.796817] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  619. [ 40.806810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  620. [ 40.816812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  621. [ 40.826808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  622. [ 40.836809] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  623. [ 40.846803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  624. [ 40.856801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  625. [ 40.866804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  626. [ 40.876805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  627. [ 40.886802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  628. [ 40.896801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  629. [ 40.907019] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  630. [ 40.916836] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  631. [ 40.926805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  632. [ 40.936804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  633. [ 40.946804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  634. [ 40.956802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  635. [ 40.966806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  636. [ 40.976807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  637. [ 40.986803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  638. [ 40.996808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  639. [ 41.006801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  640. [ 41.016817] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  641. [ 41.026847] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  642. [ 41.036819] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  643. [ 41.046815] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  644. [ 41.056813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  645. [ 41.066854] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  646. [ 41.076848] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  647. [ 41.086818] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  648. [ 41.096807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  649. [ 41.106807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  650. [ 41.116803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  651. [ 41.126807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  652. [ 41.136805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  653. [ 41.146810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  654. [ 41.156830] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  655. [ 41.166836] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  656. [ 41.176807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  657. [ 41.186823] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  658. [ 41.196816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  659. [ 41.206810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  660. [ 41.216816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  661. [ 41.226810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  662. [ 41.236805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  663. [ 41.246800] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  664. [ 41.256813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  665. [ 41.266806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  666. [ 41.276809] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  667. [ 41.286813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  668. [ 41.296802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  669. [ 41.306802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  670. [ 41.316804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  671. [ 41.326805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  672. [ 41.336806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  673. [ 41.346836] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  674. [ 41.356830] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  675. [ 41.366814] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  676. [ 41.376840] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  677. [ 41.386830] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  678. [ 41.396806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  679. [ 41.406796] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  680. [ 41.416800] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  681. [ 41.426808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  682. [ 41.436813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  683. [ 41.446810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  684. [ 41.456801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  685. [ 41.466811] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  686. [ 41.476805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  687. [ 41.486800] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  688. [ 41.496806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  689. [ 41.506800] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  690. [ 41.516818] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  691. [ 41.526812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  692. [ 41.536803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  693. [ 41.546802] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  694. [ 41.556800] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  695. [ 41.566806] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  696. [ 41.576800] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  697. [ 41.586805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  698. [ 41.596812] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  699. [ 41.606810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  700. [ 41.616805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  701. [ 41.626805] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  702. [ 41.636804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  703. [ 41.646803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  704. [ 41.656803] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  705. [ 41.666851] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  706. [ 41.676833] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  707. [ 41.686821] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  708. [ 41.696827] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  709. [ 41.706816] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  710. [ 41.716814] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  711. [ 41.726808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  712. [ 41.736807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  713. [ 41.746807] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  714. [ 41.756808] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  715. [ 41.766817] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  716. [ 41.776813] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  717. [ 41.786810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  718. [ 41.796810] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  719. [ 41.806804] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  720. [ 41.816801] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  721. [ 41.826831] tegra_dc_underflow_handler:dc in underflow state. enable UF_LINE_FLUSH to clear up
  722.  
  723. #same line over and over again, can't fit the full dmesg of either log in my terminal.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!