Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- YAMON ROM Monitor, Revision 02.17mtx1.
- Copyright (c) 1999-2000 MIPS Technologies, Inc. - All Rights Reserved.
- For a list of available commands, type 'help'.
- Compilation time = Aug 27 2005 17:26:15
- MAC address = 00.0e.56.00.0e.33
- Processor Company ID = 0x03
- Processor ID/revision = 0x02 / 0x02
- Endianness = Little
- CPU = 324 MHz
- Flash memory size = 32 MByte
- SDRAM size = 64 MByte
- First free SDRAM address = 0x8008ca54
- MTX-1 Watchdog support
- Environment variable 'start' exists. After 4.0 seconds
- it will be interpreted as a YAMON command and executed.
- Press Ctrl-C to bypass this.
- General Purpuse Button is Pressed
- Initialized Network Console
- Got advertisement from 00:16:41:AE:34:47. Switching to network console
- Linux version 2.6.35.7 (yves@christchurch) (gcc version 4.3.3 (GCC) ) #1 Fri Oct 8 23:01:37 CEST 2010
- bootconsole [early0] enabled
- CPU revision is: 01030202 (Au1500)
- (PRId 01030202) @ 324.00 MHz
- 4G Systems MTX-1 Board
- Determined physical RAM map:
- memory: 04000000 @ 00000000 (usable)
- Initrd not found or empty - disabling initrd
- Zone PFN ranges:
- Normal 0x00000000 -> 0x00004000
- Movable zone start PFN for each node
- early_node_map[1] active PFN ranges
- 0: 0x00000000 -> 0x00004000
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- Kernel command line: console=ttyS0,115200 console=ttyS0,115200
- PID hash table entries: 256 (order: -2, 1024 bytes)
- Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
- Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
- Memory: 61256k/65536k available (2059k kernel code, 4280k reserved, 347k data, 148k init, 0k highmem)
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:128
- Alchemy clocksource installed
- Calibrating delay loop (skipped) preset value.. 324.00 BogoMIPS (lpj=648000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- NET: Registered protocol family 16
- Alchemy DMA initialized
- bio: create slab at 0
- Switching to clocksource alchemy-counter1
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 2048 bind 2048)
- TCP reno registered
- UDP hash table entries: 256 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- Registering mini_fo version $Id$
- JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- msgmni has been set to 119
- io scheduler noop registered
- io scheduler deadline registered (default)
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250.9: ttyS0 at MMIO 0x11100000 (irq = 8) is a 16550A
- console [ttyS0] enabled, bootconsole disabled
- console [ttyS0] enabled, bootconsole disabled
- serial8250.9: ttyS1 at MMIO 0x11400000 (irq = 11) is a 16550A
- physmap platform flash device: 02000000 at 1e000000
- physmap-flash.0: Found 2 x16 devices at 0x0 in 32-bit bank
- CFI mfr 0x00000001
- CFI id 0x00001200
- Amd/Fujitsu Extended Query Table at 0x0040
- Amd/Fujitsu Extended Query version 1.3.
- number of CFI chips: 1
- cmdlinepart partition parsing not available
- RedBoot partition parsing not available
- Using physmap partition information
- Creating 4 MTD partitions on "physmap-flash.0":
- 0x000000000000-0x000001c00000 : "rootfs"
- mtd: partition "rootfs" set to be root filesystem
- split_squashfs: no squashfs found in "physmap-flash.0"
- 0x000001c00000-0x000001d00000 : "yamon"
- 0x000001d00000-0x000001fc0000 : "kernel"
- 0x000001fc0000-0x000002000000 : "yamon env"
- au1000_eth_mii: probed
- au1000-eth au1000-eth.0: (unregistered net_device): attached PHY driver [Generic PHY] (mii_bus:phy_ad)
- au1000-eth au1000-eth.0: eth0: Au1xx0 Ethernet found at 0x11500000, irq 36
- au1000_eth version 1.7 Pete Popov
- MTX-1 Watchdog driver
- TCP westwood registered
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear
- All bugs added by David S. Miller
- List of all partitions:
- 1f00 28672 mtdblock0 (driver?)
- 1f01 1024 mtdblock1 (driver?)
- 1f02 2816 mtdblock2 (driver?)
- 1f03 256 mtdblock3 (driver?)
- No filesystem could mount root, tried: squashfs
- Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement