SHARE
TWEET

ZTE ZXHN H298A - Bootloader Mode

unkypoo Aug 19th, 2018 792 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 02:55:21 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3.  
  4. DRAMC V2.0 (0)
  5.  
  6.  
  7.  
  8. DRAMC V2.3.0.2 (0)
  9.  
  10.  
  11.  
  12. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  13.  
  14. Memory size 128MB
  15.  
  16. NAND Page size:2048B,Total size 128MB
  17.  
  18. bmt pool size: 81
  19.  
  20. board ip address:192.168.1.254
  21. reset DECT & SWITCH start.
  22. ..
  23. reset DECT & SWITCH over.
  24.  
  25. *** Press 1 means entering boot mode***
  26. *** Press 2 means entering testing mode***
  27. *** Press 3 means entering norm mode***
  28.  
  29. Entering boot mode ...
  30.  
  31. ******start httpd******
  32.  
  33. PBUF_POOL_BUFSIZE = 256
  34.  
  35. tcp_bind()
  36.  
  37. Local Port = 0
  38.  
  39. tcp_bind: bind to port 80
  40.  
  41. Search PHY addr and found PHY addr=0
  42. Not found TC Phy
  43.  
  44. PBUF_POOL_BUFSIZE = 256
  45.  
  46. memtop = 80020000
  47. zteboot_cmdline_init
  48. bldr> START TO RECEIVE the FILE
  49.  
  50. .................................................................................................................................................................................................................................................................................................................................................................................
  51.  
  52. START TO CLOSE the FILE
  53.  
  54. Received file:
  55. rcvdata_size = 12621560
  56.  
  57. start = 0x80020000
  58.  
  59. Firmware key1 check erro
  60.  
  61. bldr> help
  62.                                                                              
  63. ?                                   Print out help messages.                  
  64. help                                Print out help messages.                  
  65. go                                  Booting the linux kernel.                
  66. decomp                              Decompress kernel image to ram.          
  67. memrl <addr>                        Read a word from addr.                    
  68. memwl <addr> <value>                Write a word to addr.                    
  69. dump <addr> <len>                   Dump memory content.                      
  70. jump <addr>                         Jump to addr.                            
  71. flash <dst> <src> <len>             Write to flash from src to dst.          
  72. erase <dst> <len>                   Erase flash.                              
  73. program <dst> <src> <len>           Program flash.                            
  74. xmdm <addr> <len>                   Xmodem receive to addr.                  
  75. miir <phyaddr> <reg>                Read ethernet phy reg.                    
  76. miiw <phyaddr> <reg> <value>        Write ethernet phy reg.                  
  77. gswr <reg>                          Read gsw reg.                            
  78. gsww <reg> <value>                  Write gsw reg.                            
  79. cpufreq <freq num> / <m> <n>        Set CPU Freq <156~450>(freq has to be multiple of 6)
  80. ipaddr <ip addr>                    Change modem's IP.                        
  81. httpd                               Start Web Server                          
  82. ddrdrv <..>                         Change DDR driving length                
  83. reset                               reset the system                          
  84. upgrade <ip addr> <filename>        upgrade version                          
  85. runemt                              run emt mode                              
  86. bldr> httpd
  87. PBUF_POOL_BUFSIZE = 256
  88.  
  89. tcp_bind()
  90.  
  91. Local Port = 0
  92.  
  93. tcp_bind: bind to port 80
  94.  
  95. bldr> START TO RECEIVE the FILE
  96.  
  97. ...................................................................................................................................................................................................................................................................................................................................................................................
  98.  
  99. START TO CLOSE the FILE
  100.  
  101. Received file:
  102. rcvdata_size = 12653488
  103.  
  104. start = 0x80020000
  105.  
  106. Firmware key1 check erro
  107. 
  108. bldr> httpd
  109. PBUF_POOL_BUFSIZE = 256
  110.  
  111. tcp_bind()
  112.  
  113. Local Port = 0
  114.  
  115. tcp_bind: bind to port 80
  116.  
  117. bldr> START TO RECEIVE the FILE
  118.  
  119. ..................................................................................................................................................................................................................................................................................................................................................................................
  120.  
  121. START TO CLOSE the FILE
  122.  
  123. Received file:
  124. rcvdata_size = 12621560
  125.  
  126. start = 0x80020000
  127.  
  128. Firmware key1 check erro
  129.  
  130. bldr> httpd
  131. PBUF_POOL_BUFSIZE = 256
  132.  
  133. tcp_bind()
  134.  
  135. Local Port = 0
  136.  
  137. tcp_bind: bind to port 80
  138.  
  139. bldr> rseestet
  140. bldr> httpd
  141. PBUF_POOL_BUFSIZE = 256
  142.  
  143. tcp_bind()
  144.  
  145. Local Port = 0
  146.  
  147. tcp_bind: bind to port 80
  148.  
  149. bldr> telnetSTART TO RECEIVE the FILE
  150.  
  151. ..................................................................................................................................................................................................................................................................................................................................................................................
  152.  
  153. START TO CLOSE the FILE
  154.  
  155. Received file:
  156. rcvdata_size = 12611296
  157.  
  158. start = 0x80020000
  159.  
  160. Firmware key1 check erro
  161.  
  162. bldr> httpd
  163. PBUF_POOL_BUFSIZE = 256
  164.  
  165. tcp_bind()
  166.  
  167. Local Port = 0
  168.  
  169. tcp_bind: bind to port 80
  170.  
  171. bldr> go
  172. Decompress to FFFFFFFF free_mem_ptr=80600000 free_mem_ptr_end=80780000
  173. Uncompressing [LZMA] ...
  174.  
  175. bad properties
  176.  
  177.  -- System halted=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:10:07 =~=~=~=~=~=~=~=~=~=~=~=
  178.  
  179.  
  180. DRAMC V2.0 (0)
  181.  
  182.  
  183.  
  184. DRAMC V2.3.0.2 (0)
  185.  
  186.  
  187.  
  188. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  189.  
  190. Memory size 128MB
  191.  
  192. NAND Page size:2048B,Total size 128MB
  193.  
  194. bmt pool size: 81
  195.  
  196. board ip address:192.168.1.254
  197. reset DECT & SWITCH start.
  198. ..
  199. reset DECT & SWITCH over.
  200.  
  201. *** Press 1 means entering boot mode***
  202. *** Press 2 means entering testing mode***
  203. *** Press 3 means entering norm mode***
  204. ............................................................
  205.  
  206.  
  207. Found image at 0x01680000
  208.  
  209. Found image at 0x01a80000
  210. ****Try the second image...
  211. rootfs 1:addr:87700000--size:900000
  212. decompress_addr 1a80100 decompress_addr_end 1e80000
  213. Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
  214. 75xx: 0x80
  215. Uncompressing [LZMA] ...  done.
  216. Linux version 2.6.36 (xialei@localhost.localdomain) (gcc version 4.3.4 (GCC) ) #1 SMP Tue Jan 2 14:23:32 CST 2018
  217. ISPRAM0: PA=00330000,Size=00008000,enabled
  218. DSPRAM0: PA=1dff8000,Size=00001000,enabled
  219. Check boot para cksum...
  220. bdf bdfboot para cksum OK!
  221. Boot 2'th image
  222. bootPara reserved_fs_size=900000
  223. bootPara.runmode=3
  224. pdt_verinfo_init: tcVerInfo->RunMode[3]
  225. bootPara.bootWhichImg=2
  226. bootPara.img_info_tbl[0].flashOffset=0x 1680000
  227. hw_ver=00
  228. sHardVersion=V1.0.00
  229. memsize:128MB
  230. Ralink MT751020 SOC prom init
  231. bootconsole [early0] enabled
  232. CPU revision is: 00019555 (MIPS 34Kc)
  233. Determined physical RAM map:
  234.  memory: 076e0000 @ 00020000 (usable)
  235. Wasting 1024 bytes for tracking 32 unused pages
  236. Zone PFN ranges:
  237.   Normal   0x00000020 -> 0x00007700
  238. Movable zone start PFN for each node
  239. early_node_map[1] active PFN ranges
  240.     0: 0x00000020 -> 0x00007700
  241. 3 available secondary CPU TC(s)
  242. PERCPU: Embedded 7 pages/cpu @810f3000 s7232 r8192 d13248 u65536
  243. pcpu-alloc: s7232 r8192 d13248 u65536 alloc=16*4096
  244. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  245. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 30194
  246. Kernel command line:  es=1
  247. PID hash table entries: 512 (order: -1, 2048 bytes)
  248. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  249. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  250. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  251. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  252. Writing ErrCtl register=00021674
  253. Readback ErrCtl register=00021674
  254. nmi base is 8114c200
  255. Memory: 114728k/121728k available (3288k kernel code, 7000k reserved, 791k data, 232k init, 0k highmem)
  256. SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  257. Hierarchical RCU implementation.
  258.     RCU-based detection of stalled CPUs is disabled.
  259.     Verbose stalled-CPUs detection is disabled.
  260. NR_IRQS:64
  261. CPU frequency 750.00 MHz
  262.  Using 266.667 MHz high precision timer.
  263. console [ttyS0] enabled, bootconsole disabled
  264. console [ttyS0] enabled, bootconsole disabled
  265. Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
  266. pid_max: default: 32768 minimum: 301
  267. Mount-cache hash table entries: 512
  268. 34K sync es set to 1.
  269. Config7: 0x80080500
  270. Limit of 4 TCs set
  271. TLB of 64 entry pairs shared by 2 VPEs
  272. VPE 0: TC 0 1 2, VPE 1: TC 3
  273. IPI buffer pool of 16 buffers
  274. CPU revision is: 00019555 ((null))
  275. TC 1 going on-line as CPU 1
  276. CPU revision is: 00019555 ((null))
  277. TC 2 going on-line as CPU 2
  278. CPU revision is: 00019555 ((null))
  279. TC 3 going on-line as CPU 3
  280. Brought up 4 CPUs
  281. NET: Registered protocol family 16
  282. 11930:22:53 [KMONITOR][Notice] [monitor.c(938)MonitorInit]  cspmonitor init... !  
  283. MT7510_pcie_init:1
  284. check pcie link up status:
  285. isRC0_LINKUP=1
  286. isRC1_LINKUP=1
  287. registering PCI controller with io_map_base unset
  288. bio: create slab <bio-0> at 0
  289. SCSI subsystem initialized
  290. usbcore: registered new interface driver usbfs
  291. usbcore: registered new interface driver hub
  292. usbcore: registered new device driver usb
  293. pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  294. pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff]
  295. pci 0000:00:01.0: BAR 9: assigned [mem 0x20200000-0x202fffff pref]
  296. pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
  297. pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff]
  298. pci 0000:00:00.0: PCI bridge to [bus 01-01]
  299. pci 0000:00:00.0:   bridge window [io  disabled]
  300. pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
  301. pci 0000:00:00.0:   bridge window [mem pref disabled]
  302. pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit]
  303. pci 0000:02:00.0: BAR 0: set to [mem 0x20100000-0x201fffff 64bit] (PCI address [0x20100000-0x201fffff]
  304. pci 0000:02:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref]
  305. pci 0000:00:01.0: PCI bridge to [bus 02-02]
  306. pci 0000:00:01.0:   bridge window [io  disabled]
  307. pci 0000:00:01.0:   bridge window [mem 0x20100000-0x201fffff]
  308. pci 0000:00:01.0:   bridge window [mem 0x20200000-0x202fffff pref]
  309. PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  310. PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  311. 11930:22:54 [KQOS][Info] [qos.c(4999)CSPKernel_QoS_I] Qos module init
  312. Switching to clocksource MIPS
  313. NET: Registered protocol family 2
  314. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  315. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  316. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  317. TCP: Hash tables configured (established 4096 bind 4096)
  318. TCP: reno registered
  319. UDP hash table entries: 128 (order: 0, 4096 bytes)
  320. UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  321. NET: Registered protocol family 1
  322. TC3162 hardware watchdog module loaded.
  323. spitest init OK!
  324. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  325. msgmni has been set to 224
  326. cryptomgr_test used greatest stack depth: 15632 bytes left
  327. io scheduler noop registered (default)
  328. ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
  329. brd: module loaded
  330. tc3162 mtd init: mt6573_nand_init enter
  331. MediaTek MT6573 Nand driver init, version v2.0
  332. tc3162: flash device 0x01000000 at 0x1c000000
  333. tc3162 mtd init: nandflash_probe enter
  334. Allocate 16 byte aligned buffer: 8044d4f0
  335. Enable NFI Clock
  336. # MT6573 NAND # : Use HW ECC
  337. manu_id=c2, dev_id=f1
  338. ext_id=809502,
  339. Device found in MTK table, ID: c2f1
  340. [NAND] pagesz:2048 eccsz: 32, oobsz: 128
  341. Support this Device in MTK table! c2f1
  342.  
  343. NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
  344. bmt pool size: 81
  345. Init bmt table, size: 81
  346. bmt count: 81, system count: 943
  347. begin to search BMT from block 1023
  348. Match bmt signature @ block: 1023
  349. Valid BMT, version v1
  350. bmt found at block: 1023, mapped block: 0
  351. Load bmt data success @ block 1023
  352. BMT v1.total 0 mapping
  353. Match bbt signature
  354. BBT Checksum is: 0xd7
  355. Valid BBT, version v1
  356. bbt found, bad block count: 1
  357. init_bbt->badblock_table[0]: 468
  358. Load bbt data success
  359. [mt6573_nand] probe successfully!
  360. Creating 8 MTD partitions on "MT6573-Nand":
  361. 0x000000000000-0x000008000000 : "Whole flash"
  362. mtd: partition "Whole flash" extends beyond the end of device "MT6573-Nand" -- size truncated to 0x75c0000
  363. 0x000000000000-0x000000040000 : "Bootloader"
  364. 0x000000040000-0x000000080000 : "tag"
  365. 0x000000080000-0x000000280000 : "config"
  366. 0x000000280000-0x000001680000 : "rootfs1"
  367. 0x000001680000-0x000001a80000 : "kernel1"
  368. 0x000001a80000-0x000001e80000 : "kernel2"
  369. 0x000001e80000-0x000003280000 : "rootfs2"
  370. physmap mtd driver register!!!
  371. pkq map rom ram_flash:offset:87700000---size:900000
  372. !!!! led bink!!!
  373. RT3xxx EHCI/OHCI init.
  374. nf_conntrack version 0.5.0 (1792 buckets, 7168 max)
  375. ip_tables: (C) 2000-2006 Netfilter Core Team
  376. NET: Registered protocol family 10
  377. ip6_tables: (C) 2000-2006 Netfilter Core Team
  378. NET: Registered protocol family 17
  379. Bridge firewalling registered
  380. Ebtables v2.0 registered
  381. PPP generic driver version 2.4.2
  382. NET: Registered protocol family 24
  383. 11930:22:55 [KSWETH][Notice] [sweth_core.c(2818)sweth_init] SW&ETH HAL driver initing!
  384. 11930:22:55 [KSWETH][Notice] [sweth_core.c(144)CreateSwEthObjs] Create SW & ETH objects
  385. 11930:22:55 [KSWETH][Notice] [sweth_core.c(160)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
  386. 11930:22:55 [KSWETH][Info] [sweth_core.c(167)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=5.
  387. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  388. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj0: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 0
  389. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  390. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj1: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 1
  391. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  392. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj2: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 2
  393. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  394. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj3: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 3
  395. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  396. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj4: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 4
  397. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  398. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  399. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  400. 11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1348)TagaramodInit] Tagaram module Driver Version 0.0.1.
  401. 11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1381)TagaramodInit] parse tag param success
  402. Jiffies_test Driver Init Successfully
  403. logger: created 1024K log 'logger_main' major '99'
  404. : success register character device for /dev/monitor
  405. 11930:22:55 [MIRROR][Notice] [cspmirror.c(1262)mirror_init] ***********mirror_init************
  406. systools version:v0.7.0
  407. errorEPC = b6200580
  408. 11930:22:55 [KIGMPSNP][Info] [br_multicast_se(7334)br_mcparam_init] info init!
  409. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(stb)
  410. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(srtc)
  411. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(trtc)
  412. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(hard)
  413. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(null)
  414. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(drop)
  415. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(dscp_mark)
  416. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(vlan_prio_mark)
  417. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(dscp_vlan_prio_mark)
  418. child_dev_init start
  419. child_dev_ioctl_set set[8031b69c]
  420. 11930:22:55 [Kernm255][Info] [ver_info.c(406)ver_info_init] ver_info_init
  421. 11930:22:55 [Kernm255][Info] [ver_info.c(195)ReadInfoFromVer] ver_info_init
  422. 11930:22:55 [Kernm255][Info] [ver_info.c(202)ReadInfoFromVer] ver_info_init
  423. 11930:22:55 [Kernm255][Info] [ver_info.c(218)ReadInfoFromVer] wFirmwareForm is:0x1
  424. 11930:22:55 [KSWETH][Notice] [csp_ifinfo.c(221)csp_ifinfo_init] Initializing CSP IFinfo...
  425. khelper used greatest stack depth: 14864 bytes left
  426. khelper used greatest stack depth: 14832 bytes left
  427. register AF_INET filter failed
  428. #######begin FDB_Notify Reg
  429. #######after FDB_Notify Reg
  430. #######begin FDB_Notify Reg
  431. Shouldn't be in WHILE
  432. #######after FDB_Notify Reg
  433. 11930:22:55 [LEDKEYDRV][Error] [ledkey_callback(26)keycallback_ini] Install WPS KEY Callback Failed!
  434. VFS: Mounted root (squashfs filesystem) readonly on device 31:8.
  435. Freeing unused kernel memory: 232k freed
  436. busybox init and set aff
  437. sched_setaffinity cpu all success
  438. Algorithmics/MIPS FPU Emulator v1.5
  439. mount used greatest stack depth: 14328 bytes left
  440. init normal mode!!!
  441.  
  442. Loading drivers and kernel modules...
  443.  
  444. tccicmd V1.1.0.0 (Jan  2 2018-14:24:03)
  445. insmod used greatest stack depth: 14320 bytes left
  446. femac.c:v1.00-NAPI 29.Mar.2011
  447. rasw: FE MAC Ethernet address: 00:00:AA:BB:CC:FF
  448. 11930:22:56 [KSWETH][Info] [femac.c(7361)csp_create_vpor] register_netdev ETH obj: eth0.
  449. 11930:22:56 [KSWETH][Info] [femac.c(7361)csp_create_vpor] register_netdev ETH obj: eth1.
  450. 11930:22:56 [KSWETH][Info] [femac.c(7361)csp_create_vpor] register_netdev ETH obj: eth2.
  451. 11930:22:56 [KSWETH][Info] [femac.c(7361)csp_create_vpor] register_netdev ETH obj: eth3.
  452. 11930:22:56 [KSWETH][Info] [femac.c(7361)csp_create_vpor] register_netdev ETH obj: eth4.
  453. 11930:22:56 [KSWETH][Notice] [fe_mac_adapter.(715)Register_raeth_] Register raeth EMAC driver
  454. 11930:22:56 [KSWETH][Notice] [sweth_core.c(604)RegisterEmacDrv] Register EMAC driver
  455. 11930:22:56 [KSWETH][Notice] [sweth_core.c(433)InitSwEthObjs] Initialise SW & ETH objects
  456. 11930:22:56 [KSWETH][Warn] [sweth_core.c(1804)hal_set_port_ma] Driver do not support set MAC address!
  457. 11930:22:56 [KSWETH][Warn] [sweth_core.c(1804)hal_set_port_ma] Driver do not support set MAC address!
  458. 11930:22:56 [KSWETH][Warn] [sweth_core.c(1804)hal_set_port_ma] Driver do not support set MAC address!
  459. 11930:22:56 [KSWETH][Warn] [sweth_core.c(1804)hal_set_port_ma] Driver do not support set MAC address!
  460. 11930:22:56 [KSWETH][Warn] [sweth_core.c(1804)hal_set_port_ma] Driver do not support set MAC address!
  461. insmod used greatest stack depth: 13864 bytes left
  462. pcm_silicon: module license 'MTK' taints kernel.
  463. Disabling lock debugging due to kernel taint
  464. PCM V2.3 (Nov 30 2016 15:04:57)
  465. init mod-slic3
  466.  
  467.  
  468. Silabs SLIC type selected by SW makefile compile option
  469.  
  470.  
  471.  
  472. Init fxsNum(3) + fxoNum(0) = deviceNum(1)
  473. init mod-ksocket
  474. init mod-acodec
  475. init mod-foip3
  476. [adslTimer (1539)14:24:33]  ADSL_MODEM_STATE_DOWN
  477.  
  478. ===============================
  479. || MTK DSP init successfully ||
  480. ===============================
  481.  
  482. dbgTool_init init v2.0
  483. pid 85's current affinity mask: (null)
  484. pid 85's new affinity mask: 8
  485. pid 82's current affinity mask: (null)
  486. pid 82's new affinity mask: 8
  487. pid 92's current affinity mask: (null)
  488. pid 92's new affinity mask: 8
  489. pid 90's current affinity mask: (null)
  490. pid 90's new affinity mask: 8
  491. pid 91's current affinity mask: (null)
  492. pid 91's new affinity mask: 8
  493. taskset: invalid number '0x8'
  494. 11930:22:58 [OSS][Notice] [pc.c(1884)main] sched_setaffinity cpu 0 (ret = 0)
  495.  
  496.  
  497. ZXHN H298A
  498.  
  499. login: 11930:22:59 [User][Info] [db_shm_mgr.c(121)DBShmSrvInit] iShmId:65538
  500. 11930:22:59 [User][Info] [db_shm_mgr.c(136)DBShmSrvInit] pShmBuf:60000000
  501. 11930:23:00 [ipif_mgr][Info] [ipv4_addr_mgr.c(1402)ipv4AddrInit] [ipv4AddrInit] success
  502. 11930:23:00 [ipif_mgr][Info] [ifs_ipif.c(2110)ifsIPIFInit] [ifsIPIFInit] success
  503. 11930:23:00 [ipif_mgr][Error] [oss_subscribe.c(526)SubScribPublish] SubScribPublish server 10002 already exist!
  504. 11930:23:00 [ipif_mgr][Error] [oss_subscribe.c(526)SubScribPublish] SubScribPublish server 10008 already exist!
  505. 11930:23:00 [qos_mgr][Info] [hardware_qos.c(2676)ComMTK7510Regis] PdtMTKRegisteIFQdisc***register*****
  506. 11930:23:00 [qos_mgr][Info] [interface_api.c(1495)RegisterNetIFNo] RegisterNetIFNotify start, event[6] IF_ID[] WanLan[3] Handle[0x4d2cb4]
  507. 11930:23:00 [qos_mgr][Info] [interface_api.c(1538)RegisterNetIFNo] Reg NetIF Notify ok, IF_ID[], WanLan[3], pHandle[0x4d2cb4], Event[6]
  508. 11930:23:00 [route_mgr][Info] [policy_route.c(1596)policyRtTableIn] policyRtTableInit ok
  509. 11930:23:00 [route_mgr][Info] [policy_route.c(1511)defPolicyRtChai] defPolicyRtChainInit ok
  510. 11930:23:00 [route_mgr][Info] [rip_mgr.c(39)RIPInit] Common Info: rip init
  511. 11930:23:00 [route_mgr][Info] [ripng_mgr.c(39)RIPngInit] Common Info: ripng init
  512. 11930:23:00 [route_mgr][Info] [route_mgr.c(488)routeInit] SubScribPublish DefGW Service OK
  513. 11930:23:00 [bridge][Warn] [bridge.c(2267)bridgeInit] SubScribPublish Bridge Service OK
  514. 11930:23:00 [bridge][Info] [bridge.c(2275)bridgeInit] module init success!(bridge_mgr)
  515. 11930:23:00 [eth_mgr][Info] [eth_mgr.c(1350)ethInit] module init success!ethernet mgr
  516. 11930:23:00 [sntp_mgr][Info] [time_policy.c(102)TpInit] module init success!1
  517. 11930:23:00 [sntp_mgr][Info] [sntp_mgr.c(1519)sntpInit] module init success!SNTP mgr
  518. 11930:23:00 [binding_mgr][Info] [binding_mgr.c(1493)bindingInit] [bindingInit] end
  519. 11930:23:00 [kernelmonitor][Info] [cspd_monitor.c(436)MonitorMain] monitor init success
  520. 11930:23:00 [DB][Notice] [dbc_core.c(364)_dbInit] Check whether the proc file started successfully
  521. 11930:23:00 [DB][Notice] [dbc_core.c(370)_dbInit] the proc file started successfully
  522. 11930:23:00 [DB][Error] [dbc_mgr_tbl.c(504)dbCreateDomainN] create table fail (ParentControlUser) domain(FilterMode) error default value
  523. [log_file.c(1978)ProcLogConf] Set LOG_FILE_CONF_SET_PDTCONF.
  524. [log_file.c(2042)ProcLogConf] Set cAutoSave = 1
  525. 11930:23:00 [dhcp4c][Warn] [dhcp4c_inst.c(4548)_dhcp4cRegSendO] Send code[60]fun[0x58ae1c] is replaced by fun[0x59390c]
  526. 11930:23:00 [dhcps][Info] [dhcps.c(160)DHCPSInit] module init success!dhcp server
  527. 11930:23:00 [PingTracert_mgr][Info] [tracert_mgr.c(1281)tracertInit] module init success!tracert mgr
  528. 11930:23:00 [ppp_mgr][Info] [ppp_mgr.c(7821)PPPInit] module init success!
  529. 11930:23:00 [addr6_mgr][Info] [addr6_mgr.c(3430)Addr6Main] wEvent=0x1100, wMsgType=1, wMsgLen=0, wState=0
  530. 11930:23:00 [prefix_mgr][Info] [prefix_mgr.c(3512)prefixInit] Prefix Init Success!
  531. 11930:23:00 [ptry_mgr][Info] [ptry_mgr.c(478)ptryMgrInit] module init success!(PTry mgr)
  532. 11930:23:00 [ddns_mgr][Info] [ddns_mgr.c(1419)ddnsInit] module init success!ddns_mgr
  533. 11930:23:00 [dns_mgr][Info] [dns_mgr.c(459)dnsInit] SubScribPublish NetIF Service OK
  534. 11930:23:00 [dns_mgr][Info] [comp_dns_mgr.c(75)CompDnsInit] Init Comp_Dns_Mgr Success!
  535. 11930:23:00 [fm_mgr][Info] [fm_mgr.c(2494)fmServerInit] module init success!Enter FmServer Init!
  536. 11930:23:00 [fm_mgr][Info] [fm_mgr.c(4139)fmMgrInit] module init success!fm mgr
  537. 11930:23:00 [tr143_mgr][Info] [tr143_mgr.c(548)tr143Init] module init success!tr143 mgr
  538. 11930:23:00 [ipif_mgr][Info] [ifs_netif.c(2530)interfaceNotify] [interfaceNotifyHook] start, to pid[cspd.cspd.qos_mgr]
  539. 11930:23:00 [DB][Error] [dbc_mgr_view.c(428)dbMgrCommViewAd] db view init fail(DHCPSHostCfg)
  540. 11930:23:00 [DB][Error] [dbc_mgr_view.c(428)dbMgrCommViewAd] db view init fail(DHCPSPool)
  541. 11930:23:00 [DB][Error] [dbc_mgr_view.c(428)dbMgrCommViewAd] db view init fail(DHCPSBind)
  542. 11930:23:00 [DB][Error] [dbc_mgr_view.c(428)dbMgrCommViewAd] db view init fail(BrVlan)
  543. 11930:23:00 [DB][Error] [dbc_mgr_view.c(428)dbMgrCommViewAd] db view init fail(BrVlanport)
  544. 11930:23:00 [DB][Error] [dbc_mgr_view.c(428)dbMgrCommViewAd] db view init fail(BrFilter)
  545. 11930:23:00 [DB][Warn] [dbc_mgr_pdt_enc(82)_getTagparamMD5] var/tagparam_m does not exist!
  546. 11930:23:00 [DB][Warn] [dbc_mgr_pdt_enc(156)PdtDBSetAESEncr] _getTagparamMD5 failed! Use default
  547. open file failed
  548. 11930:23:00 [DB][Info] [dbc_person_wlan(270)dbPersonInitPSK] set wlan0:KeyPassphrase1: 3t6SztH5NDAY from flash
  549. 11930:23:00 [DB][Info] [dbc_person_wlan(270)dbPersonInitPSK] set wlan4:KeyPassphrase1: 3t6SztH5NDAY from flash
  550. 11930:23:00 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_user_cfg.xml
  551. 11930:23:00 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_user_cfg.xml
  552. 11930:23:00 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_user_cfg.xml
  553. 11930:23:00 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_user_cfg.xml
  554. 11930:23:00 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_user_cfg.xml
  555. 11930:23:00 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_user_cfg.xml
  556. 11930:23:00 [DB][Info] [dbc_mgr_file.c(1295)dbFileLoadCfg] find file /var/tmp/db_Decry_cfg.xml
  557. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_backup_cfg.xml
  558. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_backup_cfg.xml
  559. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_backup_cfg.xml
  560. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_backup_cfg.xml
  561. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_backup_cfg.xml
  562. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_backup_cfg.xml
  563. 11930:23:01 [DB][Info] [dbc_mgr_file.c(2289)dbInitSignVal] szCfgSignVal= ZXHN H298A V1.0,iRet:0
  564. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1286)file_open] open file: /proc/cfg/db_user_cfg.xml
  565. 11930:23:01 [DB][Info] [dbc_core.c(1084)dbEndTm] (ALL) end, use 149 tick
  566. 11930:23:01 [Kernel][Info] [proc_file_mod.c(1416)file_close] close file: /proc/cfg/db_user_cfg.xml
  567. 11930:23:02 [dnsurl_policy][Info] [route_api.c(579)RegisterDefGWNo] RegisterDefGWNotify sucessed, ipType[3] event[3] Handle[0x46a6e4]
  568. 11930:23:02 [log_mgr][Notice] [log_file.c(1704)ProcLogConf] [Log File] disable.
  569. 11930:23:02 [dhcps][Info] [ipif_api.c(2174)RegisterV4AddrN] RegisterV4AddrNotify start, event[1] IF_ID[DEV.IP.IF1] WanLan[2] Handle[0x57b478]
  570. 11930:23:02 [dhcps][Warn] [interface_api.c(682)GetIFBaseInfo] call dbAPIQryView failed!IF_ID[DEV.IP.IF1], count[0]
  571. 11930:23:02 [dhcps][Warn] [dhcpsinst.c(462)getIFInfoAndCre] Call function failed!GetWANLANBaseInfo, IF_ID[DEV.IP.IF1]
  572. 11930:23:02 [dhcps][Info] [dhcpsinst.c(548)dhcp4sIFRegiste] dhcps start inst,dhcp4sIFRegister fail
  573. 11930:23:02 [dhcps][Info] [interface_api.c(1495)RegisterNetIFNo] RegisterNetIFNotify start, event[6] IF_ID[] WanLan[2] Handle[0x57b560]
  574. 11930:23:02 [dhcps][Info] [interface_api.c(1538)RegisterNetIFNo] Reg NetIF Notify ok, IF_ID[], WanLan[2], pHandle[0x57b560], Event[6]
  575. 11930:23:02 [dhcp4c][Info] [interface_api.c(1495)RegisterNetIFNo] RegisterNetIFNotify start, event[6] IF_ID[DEV.IP.IF3] WanLan[3] Handle[0x5924b4]
  576. 11930:23:02 [dhcp4c][Info] [interface_api.c(1508)Regiptables used greatest stack depth: 13792 bytes left
  577. isterNetIFNo] IF_ID Not Null[DEV.IP.IF3]
  578. 11930:23:02 [dhcp4c][Info] [interface_api.c(1538)RegisterNetIFNo] Reg NetIF Notify ok, IF_ID[DEV.IP.IF3], WanLan[3], pHandle[0x5924b4], Event[6]
  579. 11930:23:02 [dhcp4c][Info] [interface_api.c(1495)RegisterNetIFNo] RegisterNetIFNotify start, event[6] IF_ID[DEV.IP.IF4] WanLan[3] Handle[0x5924b4]
  580. 11930:23:02 [dhcp4c][Info] [interface_api.c(1508)RegisterNetIFNo] IF_ID Not Null[DEV.IP.IF4]
  581. 11930:23:02 [dhcp4c][Info] [interface_api.c(1538)RegisterNetIFNo] Reg NetIF Notify ok, IF_ID[DEV.IP.IF4], WanLan[3], pHandle[0x5924b4], Event[6]
  582. [log_file.c(1714)ProcLogConf] Set SaveEnable=0
  583. 11930:23:02 [dhcp6s][Info] [ipif_api.c(2330)RegAddr6Notify] RegAddr6Notify start, event[3] IF_ID[] WanLan[2] Handle[0x456710]
  584. 11930:23:02 [adev_mgr][Info] [access_dev_mgr.(285)adevStart] module start success!(Adev mgr)
  585. 11930:23:02 [srm_mgr][Info] [srm_mgr.c(230)SrmInit] module init success!use SRM_DBVIEW data
  586. 11930:23:02 [wwan_mgr][Info] [wwan_mgr.c(1080)WwanMgrInit] module init success!wwan mgr
  587. 11930:23:02 [wwan_mgr][Info] [ifs_netif.c(1182)AllocNetIF] AllocNetIF start,IF_ID DEV.POTS1
  588. 11930:23:02 [wwan_mgr][Info] [ifs_netif.c(1182)AllocNetIF] AllocNetIF start,IF_ID DEV.DT1
  589. 11930:23:02 [wwan_mgr][Info] [ifs_netif.c(957)lowlayerIFChang] oldcount 0, newcount 1
  590. 11930:23:02 [wwan_mgr][Info] [ifs_netif.c(1182)AllocNetIF] AllocNetIF start,IF_ID DEV.DT2
  591. 11930:23:02 [wwan_mgr][Info] [ifs_netif.c(957)lowlayerIFChang] oldcount 0, newcount 1
  592. 11930:23:02 [log_mgr][Info] [log_mgr.c(1276)logSetSerialEna] logGetVerDate str = 20180102.
  593. 11930:23:02 [OSS][Warn] [oss_event_handl(149)OssEventListCal]  OssEventListCallChain id = 0x1103!!
  594. [log_file.c(3540)logFileProcMsg] operation result --- Success
  595. [log_file.c(3395)logRegisterToLogcat] RegisterToLogcat success.
  596.  
  597.  
  598. ZXHN H298A
  599.  
  600. login: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:16:25 =~=~=~=~=~=~=~=~=~=~=~=
  601.  
  602.  
  603. DRAMC V2.0 (0)
  604.  
  605.  
  606.  
  607. DRAMC V2.3.0.2 (0)
  608.  
  609.  
  610.  
  611. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  612.  
  613. Memory size 128MB
  614.  
  615. NAND Page size:2048B,Total size 128MB
  616.  
  617. bmt pool size: 81
  618.  
  619. board ip address:192.168.1.254
  620. reset DECT & SWITCH start.
  621. ..
  622. reset DECT & SWITCH over.
  623.  
  624. *** Press 1 means entering boot mode***
  625. *** Press 2 means entering testing mode***
  626. *** Press 3 means entering norm mode***
  627. ............................................................
  628.  
  629.  
  630. Found image at 0x01680000
  631.  
  632. Found image at 0x01a80000
  633. ****Try the second image...
  634. rootfs 1:addr:87700000--size:900000
  635. decompress_addr 1a80100 decompress_addr_end 1e80000
  636. Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
  637. 75xx: 0x80
  638. Uncompressing [LZMA] ...  done.
  639. Linux version 2.6.36 (xialei@localhost.localdomain) (gcc version 4.3.4 (GCC) ) #1 SMP Tue Jan 2 14:23:32 CST 2018
  640. ISPRAM0: PA=00330000,Size=00008000,enabled
  641. DSPRAM0: PA=1dff8000,Size=00001000,enabled
  642. Check boot para cksum...
  643. bdf bdfboot para cksum OK!
  644. Boot 2'th image
  645. bootPara reserved_fs_size=900000
  646. bootPara.runmode=3
  647. pdt_verinfo_init: tcVerInfo->RunMode[3]
  648. bootPara.bootWhichImg=2
  649. bootPara.img_info_tbl[0].flashOffset=0x 1680000
  650. hw_ver=00
  651. sHardVersion=V1.0.00
  652. memsize:128MB
  653. Ralink MT751020 SOC prom init
  654. bootconsole [early0] enabled
  655. CPU revision is: 00019555 (MIPS 34Kc)
  656. Determined physical RAM map:
  657.  memory: 076e0000 @ 00020000 (usable)
  658. Wasting 1024 bytes for tracking 32 unused pages
  659. Zone PFN ranges:
  660.   Normal   0x00000020 -> 0x00007700
  661. Movable zone start PFN for each node
  662. early_node_map[1] active PFN ranges
  663.     0: 0x00000020 -> 0x00007700
  664. 3 available secondary CPU TC(s)
  665. PERCPU: Embedded 7 pages/cpu @810f3000 s7232 r8192 d13248 u65536
  666. pcpu-alloc: s7232 r8192 d13248 u65536 alloc=16*4096
  667. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  668. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 30194
  669. Kernel command line:  es=1
  670. PID hash table entries: 512 (order: -1, 2048 bytes)
  671. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  672. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  673. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  674. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  675. Writing ErrCtl register=000216f4
  676. Readback ErrCtl register=000216f4
  677. nmi base is 8114c200
  678. Memory: 114728k/121728k available (3288k kernel code, 7000k reserved, 791k data, 232k init, 0k highmem)
  679. SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  680. Hierarchical RCU implementation.
  681.     RCU-based detection of stalled CPUs is disabled.
  682.     Verbose stalled-CPUs detection is disabled.
  683. NR_IRQS:64
  684. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:17:29 =~=~=~=~=~=~=~=~=~=~=~=
  685.  
  686.  
  687. DRAMC V2.0 (0)
  688.  
  689.  
  690.  
  691. DRAMC V2.3.0.2 (0)
  692.  
  693.  
  694.  
  695. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  696.  
  697. Memory size 128MB
  698.  
  699. NAND Page size:2048B,Total size 128MB
  700.  
  701. bmt pool size: 81
  702.  
  703. board ip address:192.168.1.254
  704. reset DECT & SWITCH start.
  705. ..
  706. reset DECT & SWITCH over.
  707.  
  708. *** Press 1 means entering boot mode***
  709. *** Press 2 means entering testing mode***
  710. *** Press 3 means entering norm mode***
  711.  
  712. Entering test mode ...
  713.  
  714.  
  715.  
  716. Found image at 0x01680000
  717.  
  718. Found image at 0x01a80000
  719. ****Try the second image...
  720. rootfs 1:addr:87700000--size:900000
  721. decompress_addr 1a80100 decompress_addr_end 1e80000
  722. Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
  723. 75xx: 0x80
  724. Uncompressing [LZMA] ...  done.
  725. Linux version 2.6.36 (xialei@localhost.localdomain) (gcc version 4.3.4 (GCC) ) #1 SMP Tue Jan 2 14:23:32 CST 2018
  726. ISPRAM0: PA=00330000,Size=00008000,enabled
  727. DSPRAM0: PA=1dff8000,Size=00001000,enabled
  728. Check boot para cksum...
  729. bde bdeboot para cksum OK!
  730. Boot 2'th image
  731. bootPara reserved_fs_size=900000
  732. bootPara.runmode=2
  733. pdt_verinfo_init: tcVerInfo->RunMode[2]
  734. bootPara.bootWhichImg=2
  735. bootPara.img_info_tbl[0].flashOffset=0x 1680000
  736. hw_ver=00
  737. sHardVersion=V1.0.00
  738. memsize:128MB
  739. Ralink MT751020 SOC prom init
  740. bootconsole [early0] enabled
  741. CPU revision is: 00019555 (MIPS 34Kc)
  742. Determined physical RAM map:
  743.  memory: 076e0000 @ 00020000 (usable)
  744. Wasting 1024 bytes for tracking 32 unused pages
  745. Zone PFN ranges:
  746.   Normal   0x00000020 -> 0x00007700
  747. Movable zone start PFN for each node
  748. early_node_map[1] active PFN ranges
  749.     0: 0x00000020 -> 0x00007700
  750. 3 available secondary CPU TC(s)
  751. PERCPU: Embedded 7 pages/cpu @810f3000 s7232 r8192 d13248 u65536
  752. pcpu-alloc: s7232 r8192 d13248 u65536 alloc=16*4096
  753. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  754. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 30194
  755. Kernel command line:  es=1
  756. PID hash table entries: 512 (order: -1, 2048 bytes)
  757. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  758. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  759. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  760. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  761. Writing ErrCtl register=00021654
  762. Readback ErrCtl register=00021654
  763. nmi base is 8114c200
  764. Memory: 114728k/121728k available (3288k kernel code, 7000k reserved, 791k data, 232k init, 0k highmem)
  765. SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  766. Hierarchical RCU implementation.
  767.     RCU-based detection of stalled CPUs is disabled.
  768.     Verbose stalled-CPUs detection is disabled.
  769. NR_IRQS:64
  770. CPU frequency 750.00 MHz
  771.  Using 266.667 MHz high precision timer.
  772. console [ttyS0] enabled, bootconsole disabled
  773. console [ttyS0] enabled, bootconsole disabled
  774. Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
  775. pid_max: default: 32768 minimum: 301
  776. Mount-cache hash table entries: 512
  777. 34K sync es set to 1.
  778. Config7: 0x80080500
  779. Limit of 4 TCs set
  780. TLB of 64 entry pairs shared by 2 VPEs
  781. VPE 0: TC 0 1 2, VPE 1: TC 3
  782. IPI buffer pool of 16 buffers
  783. CPU revision is: 00019555 ((null))
  784. TC 1 going on-line as CPU 1
  785. CPU revision is: 00019555 ((null))
  786. TC 2 going on-line as CPU 2
  787. CPU revision is: 00019555 ((null))
  788. TC 3 going on-line as CPU 3
  789. Brought up 4 CPUs
  790. NET: Registered protocol family 16
  791. 11930:22:53 [KMONITOR][Notice] [monitor.c(938)MonitorInit]  cspmonitor init... !  
  792. MT7510_pcie_init:1
  793. check pcie link up status:
  794. isRC0_LINKUP=1
  795. isRC1_LINKUP=1
  796. registering PCI controller with io_map_base unset
  797. bio: create slab <bio-0> at 0
  798. SCSI subsystem initialized
  799. usbcore: registered new interface driver usbfs
  800. usbcore: registered new interface driver hub
  801. usbcore: registered new device driver usb
  802. pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  803. pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff]
  804. pci 0000:00:01.0: BAR 9: assigned [mem 0x20200000-0x202fffff pref]
  805. pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
  806. pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff]
  807. pci 0000:00:00.0: PCI bridge to [bus 01-01]
  808. pci 0000:00:00.0:   bridge window [io  disabled]
  809. pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
  810. pci 0000:00:00.0:   bridge window [mem pref disabled]
  811. pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit]
  812. pci 0000:02:00.0: BAR 0: set to [mem 0x20100000-0x201fffff 64bit] (PCI address [0x20100000-0x201fffff]
  813. pci 0000:02:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref]
  814. pci 0000:00:01.0: PCI bridge to [bus 02-02]
  815. pci 0000:00:01.0:   bridge window [io  disabled]
  816. pci 0000:00:01.0:   bridge window [mem 0x20100000-0x201fffff]
  817. pci 0000:00:01.0:   bridge window [mem 0x20200000-0x202fffff pref]
  818. PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  819. PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  820. 11930:22:54 [KQOS][Info] [qos.c(4999)CSPKernel_QoS_I] Qos module init
  821. Switching to clocksource MIPS
  822. NET: Registered protocol family 2
  823. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  824. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  825. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  826. TCP: Hash tables configured (established 4096 bind 4096)
  827. TCP: reno registered
  828. UDP hash table entries: 128 (order: 0, 4096 bytes)
  829. UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  830. NET: Registered protocol family 1
  831. TC3162 hardware watchdog module loaded.
  832. spitest init OK!
  833. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  834. msgmni has been set to 224
  835. cryptomgr_test used greatest stack depth: 15632 bytes left
  836. io scheduler noop registered (default)
  837. ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
  838. brd: module loaded
  839. tc3162 mtd init: mt6573_nand_init enter
  840. MediaTek MT6573 Nand driver init, version v2.0
  841. tc3162: flash device 0x01000000 at 0x1c000000
  842. tc3162 mtd init: nandflash_probe enter
  843. Allocate 16 byte aligned buffer: 8044d4f0
  844. Enable NFI Clock
  845. # MT6573 NAND # : Use HW ECC
  846. manu_id=c2, dev_id=f1
  847. ext_id=809502,
  848. Device found in MTK table, ID: c2f1
  849. [NAND] pagesz:2048 eccsz: 32, oobsz: 128
  850. Support this Device in MTK table! c2f1
  851.  
  852. NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
  853. bmt pool size: 81
  854. Init bmt table, size: 81
  855. bmt count: 81, system count: 943
  856. begin to search BMT from block 1023
  857. Match bmt signature @ block: 1023
  858. Valid BMT, version v1
  859. bmt found at block: 1023, mapped block: 0
  860. Load bmt data success @ block 1023
  861. BMT v1.total 0 mapping
  862. Match bbt signature
  863. BBT Checksum is: 0xd7
  864. Valid BBT, version v1
  865. bbt found, bad block count: 1
  866. init_bbt->badblock_table[0]: 468
  867. Load bbt data success
  868. [mt6573_nand] probe successfully!
  869. Creating 8 MTD partitions on "MT6573-Nand":
  870. 0x000000000000-0x000008000000 : "Whole flash"
  871. mtd: partition "Whole flash" extends beyond the end of device "MT6573-Nand" -- size truncated to 0x75c0000
  872. 0x000000000000-0x000000040000 : "Bootloader"
  873. 0x000000040000-0x000000080000 : "tag"
  874. 0x000000080000-0x000000280000 : "config"
  875. 0x000000280000-0x000001680000 : "rootfs1"
  876. 0x000001680000-0x000001a80000 : "kernel1"
  877. 0x000001a80000-0x000001e80000 : "kernel2"
  878. 0x000001e80000-0x000003280000 : "rootfs2"
  879. physmap mtd driver register!!!
  880. pkq map rom ram_flash:offset:87700000---size:900000
  881. !!!! led bink!!!
  882. RT3xxx EHCI/OHCI init.
  883. nf_conntrack version 0.5.0 (1792 buckets, 7168 max)
  884. ip_tables: (C) 2000-2006 Netfilter Core Team
  885. NET: Registered protocol family 10
  886. ip6_tables: (C) 2000-2006 Netfilter Core Team
  887. NET: Registered protocol family 17
  888. Bridge firewalling registered
  889. Ebtables v2.0 registered
  890. PPP generic driver version 2.4.2
  891. NET: Registered protocol family 24
  892. 11930:22:55 [KSWETH][Notice] [sweth_core.c(2818)sweth_init] SW&ETH HAL driver initing!
  893. 11930:22:55 [KSWETH][Notice] [sweth_core.c(144)CreateSwEthObjs] Create SW & ETH objects
  894. 11930:22:55 [KSWETH][Notice] [sweth_core.c(160)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
  895. 11930:22:55 [KSWETH][Info] [sweth_core.c(167)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=5.
  896. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  897. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj0: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 0
  898. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  899. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj1: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 1
  900. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  901. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj2: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 2
  902. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  903. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj3: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 3
  904. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  905. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj4: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 4
  906. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  907. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  908. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  909. 11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1348)TagaramodInit] Tagaram module Driver Version 0.0.1.
  910. 11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1381)TagaramodInit] parse tag param success
  911. Jiffies_test Driver Init Successfully
  912. logger: created 1024K log 'logger_main' major '99'
  913. : success register character device for /dev/monitor
  914. 11930:22:55 [MIRROR][Notice] [cspmirror.c(1262)mirror_init] ***********mirror_init************
  915. systools version:v0.7.0
  916. errorEPC = eb732847
  917. 11930:22:55 [KIGMPSNP][Info] [br_multicast_se(7334)br_mcparam_init] info init!
  918. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(stb)
  919. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(srtc)
  920. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(trtc)
  921. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(hard)
  922. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(null)
  923. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(drop)
  924. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(dscp_mark)
  925. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(vlan_prio_mark)
  926. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(dscp_vlan_prio_mark)
  927. child_dev_init start
  928. child_dev_ioctl_set set[8031b69c]
  929. 11930:22:55 [Kernm255][Info] [ver_info.c(406)ver_info_init] ver_info_init
  930. 11930:22:55 [Kernm255][Info] [ver_info.c(195)ReadInfoFromVer] ver_info_init
  931. 11930:22:55 [Kernm255][Info] [ver_info.c(202)ReadInfoFromVer] ver_info_init
  932. 11930:22:55 [Kernm255][Info] [ver_info.c(218)ReadInfoFromVer] wFirmwareForm is:0x1
  933. 11930:22:55 [KSWETH][Notice] [csp_ifinfo.c(221)csp_ifinfo_init] Initializing CSP IFinfo...
  934. khelper used greatest stack depth: 14864 bytes left
  935. khelper used greatest stack depth: 14832 bytes left
  936. register AF_INET filter failed
  937. #######begin FDB_Notify Reg
  938. #######after FDB_Notify Reg
  939. #######begin FDB_Notify Reg
  940. Shouldn't be in WHILE
  941. #######after FDB_Notify Reg
  942. 11930:22:55 [LEDKEYDRV][Error] [ledkey_callback(26)keycallback_ini] Install WPS KEY Callback Failed!
  943. VFS: Mounted root (squashfs filesystem) readonly on device 31:8.
  944. Freeing unused kernel memory: 232k freed
  945. busybox init and set aff
  946. sched_setaffinity cpu all success
  947. Algorithmics/MIPS FPU Emulator v1.5
  948. mount used greatest stack depth: 14288 bytes left
  949. init debug mode!!!
  950. /etc/init.debug: line 74: can't create /proc/rtl_reg: nonexistent directory
  951. /etc/init.debug: line 75: usleep: not found
  952. /etc/init.debug: line 76: can't create /proc/rtl_reg: nonexistent directory
  953. /etc/init.debug: line 77: usleep: not found
  954. /etc/init.debug: line 78: can't create /proc/rtl_reg: nonexistent directory
  955. /etc/init.debug: line 79: usleep: not found
  956. /etc/init.debug: line 80: can't create /proc/rtl_reg: nonexistent directory
  957. /etc/init.debug: line 81: usleep: not found
  958. procfile used greatest stack depth: 14128 bytes left
  959. /etc/init.debug: line 95: usleep: not found
  960. /etc/init.debug: line 97: usleep: not found
  961. interface eth0 does not exist!
  962. interface eth1 does not exist!
  963. interface eth2 does not exist!
  964. interface eth3 does not exist!
  965. interface eth4 does not exist!
  966. /etc/init.debug: line 104: usleep: not found
  967. device br0 entered promiscuous mode
  968. ########br's FDB_MAX[256]
  969. bridge name bridge id       STP enabled interfaces
  970. br0     8000.00d0d0112132   no     
  971. /etc/init.debug: line 116: /etc/Wsh used greatest stack depth: 14096 bytes left
  972. ireless/CL1800/host_insmod.sh: not found
  973. /etc/init.debug: line 117: usleep: not found
  974. /etc/init.debug: line 118: /etc/Wireless/CL1800/ce_prod.sh: not found
  975.  
  976.  
  977. H168NV31
  978.  
  979. login: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:19:18 =~=~=~=~=~=~=~=~=~=~=~=
  980.  
  981.  
  982. DRAMC V2.0 (0)
  983.  
  984.  
  985.  
  986. DRAMC V2.3.0.2 (0)
  987.  
  988.  
  989.  
  990. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  991.  
  992. Memory size 128MB
  993.  
  994. NAND Page size:2048B,Total size 128MB
  995.  
  996. bmt pool size: 81
  997.  
  998. board ip address:192.168.1.254
  999. reset DECT & SWITCH start.
  1000. ..
  1001. reset DECT & SWITCH over.
  1002.  
  1003. *** Press 1 means entering boot mode***
  1004. *** Press 2 means entering testing mode***
  1005. *** Press 3 means entering norm mode***
  1006. .............................................
  1007. Entering norm mode ...
  1008.  
  1009.  
  1010.  
  1011. Found image at 0x01680000
  1012.  
  1013. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:20:04 =~=~=~=~=~=~=~=~=~=~=~=
  1014.  
  1015.  
  1016. DRAMC V2.0 (0)
  1017.  
  1018.  
  1019.  
  1020. DRAMC V2.3.0.2 (0)
  1021.  
  1022.  
  1023.  
  1024. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  1025.  
  1026. Memory size 128MB
  1027.  
  1028. NAND Page size:2048B,Total size 128MB
  1029.  
  1030. bmt pool size: 81
  1031.  
  1032. board ip address:192.168.1.254
  1033. reset DECT & SWITCH start.
  1034. ..
  1035. reset DECT & SWITCH over.
  1036.  
  1037. *** Press 1 means entering boot mode***
  1038. *** Press 2 means entering testing mode***
  1039. *** Press 3 means entering norm mode***
  1040. ...
  1041. Entering boot mode ...
  1042.  
  1043. ******start httpd******
  1044.  
  1045. PBUF_POOL_BUFSIZE = 256
  1046.  
  1047. tcp_bind()
  1048.  
  1049. Local Port = 0
  1050.  
  1051. tcp_bind: bind to port 80
  1052.  
  1053. Search PHY addr and found PHY addr=0
  1054. Not found TC Phy
  1055.  
  1056. PBUF_POOL_BUFSIZE = 256
  1057.  
  1058. memtop = 80020000
  1059. zteboot_cmdline_init
  1060. bldr> ghttpd
  1061. bldr> hlrlpelp
  1062. bldr> ?
  1063.                                                                              
  1064. ?                                   Print out help messages.                  
  1065. help                                Print out help messages.                  
  1066. go                                  Booting the linux kernel.                
  1067. decomp                              Decompress kernel image to ram.          
  1068. memrl <addr>                        Read a word from addr.                    
  1069. memwl <addr> <value>                Write a word to addr.                    
  1070. dump <addr> <len>                   Dump memory content.                      
  1071. jump <addr>                         Jump to addr.                            
  1072. flash <dst> <src> <len>             Write to flash from src to dst.          
  1073. erase <dst> <len>                   Erase flash.                              
  1074. program <dst> <src> <len>           Program flash.                            
  1075. xmdm <addr> <len>                   Xmodem receive to addr.                  
  1076. miir <phyaddr> <reg>                Read ethernet phy reg.                    
  1077. miiw <phyaddr> <reg> <value>        Write ethernet phy reg.                  
  1078. gswr <reg>                          Read gsw reg.                            
  1079. gsww <reg> <value>                  Write gsw reg.                            
  1080. cpufreq <freq num> / <m> <n>        Set CPU Freq <156~450>(freq has to be multiple of 6)
  1081. ipaddr <ip addr>                    Change modem's IP.                        
  1082. httpd                               Start Web Server                          
  1083. ddrdrv <..>                         Change DDR driving length                
  1084. reset                               reset the system                          
  1085. upgrade <ip addr> <filename>        upgrade version                          
  1086. runemt                              run emt mode                              
  1087. bldr> dump 80020000 50
  1088. 80020000  ac a2 00 00.8c 82 00 00.34 42 01 00.ac 82 00 00  |........4B......|
  1089. 80020010  0c 00 6c 44.00 00 00 00.3c 02 80 01.8c 4c 70 58  |..lD....<....LpX|
  1090. 80020020  3c 02 80 01.24 59 7a e0.00 00 40 21.00 00 48 21  |<...$Yz...@!..H!|
  1091. 80020030  24 18 00 0c.24 0f 00 01.24 0e 00 20.08 00 6d 1e  |$...$...$.. ..m.|
  1092. 80020040  24 0d 00 03.8c ea 00 00.00 00 18 21.00 00 20 21  |$..........!.. !|
  1093. bldr> dump 80020000 99999999
  1094. bldr> dump 80020000 256
  1095. bldr> dump 80020000 100
  1096. 80020000  ac a2 00 00.8c 82 00 00.34 42 01 00.ac 82 00 00  |........4B......|
  1097. 80020010  0c 00 6c 44.00 00 00 00.3c 02 80 01.8c 4c 70 58  |..lD....<....LpX|
  1098. 80020020  3c 02 80 01.24 59 7a e0.00 00 40 21.00 00 48 21  |<...$Yz...@!..H!|
  1099. 80020030  24 18 00 0c.24 0f 00 01.24 0e 00 20.08 00 6d 1e  |$...$...$.. ..m.|
  1100. 80020040  24 0d 00 03.8c ea 00 00.00 00 18 21.00 00 20 21  |$..........!.. !|
  1101. 80020050  00 6f 10 04.00 4a 10 24.00 02 10 2b.24 63 00 01  |.o...J.$...+$c..|
  1102. 80020060  14 6e ff fb.00 82 20 21.24 c6 00 01.00 a4 28 21  |.n.... !$.....(!|
  1103. 80020070  14 cd ff f4.24 e7 00 04.00 a9 10 2a.01 02 58 0a  |....$......*..X.|
  1104. 80020080  00 a2 48 0a.25 08 00 01.01 0c 10 2b.10 40 00 05  |..H.%......+.@..|
  1105. 80020090  71 18 10 02.00 00 30 21.00 00 28 21.08 00 6d 0d  |q.....0!..(!..m.|
  1106. 800200a0  00 59 38 21.11 20 00 45.24 06 ff ff.08 00 6d 39  |.Y8!. .E$.....m9|
  1107. 800200b0  24 03 00 0c.00 00 20 21.00 88 10 04.00 46 10 24  |$..... !.....F.$|
  1108. 800200c0  54 40 00 06.00 09 1f c2.24 84 00 01.14 87 ff fb  |T@......$.......|
  1109. 800200d0  00 88 10 04.08 00 6d 79.24 a5 00 01.00 69 18 21  |......my$....i.!|
  1110. 800200e0  00 05 11 40.00 44 10 21.00 03 18 43.08 00 6d 43  |...@.D.!...C..mC|
  1111. 800200f0  00 43 40 21.71 63 20 02.3c 02 80 01.24 42 7a e0  |.C@!qc .<...$Bz.|
  1112. bldr> dump 80020000 128
  1113. 80020000  ac a2 00 00.8c 82 00 00.34 42 01 00.ac 82 00 00  |........4B......|
  1114. 80020010  0c 00 6c 44.00 00 00 00.3c 02 80 01.8c 4c 70 58  |..lD....<....LpX|
  1115. 80020020  3c 02 80 01.24 59 7a e0.00 00 40 21.00 00 48 21  |<...$Yz...@!..H!|
  1116. 80020030  24 18 00 0c.24 0f 00 01.24 0e 00 20.08 00 6d 1e  |$...$...$.. ..m.|
  1117. 80020040  24 0d 00 03.8c ea 00 00.00 00 18 21.00 00 20 21  |$..........!.. !|
  1118. 80020050  00 6f 10 04.00 4a 10 24.00 02 10 2b.24 63 00 01  |.o...J.$...+$c..|
  1119. 80020060  14 6e ff fb.00 82 20 21.24 c6 00 01.00 a4 28 21  |.n.... !$.....(!|
  1120. 80020070  14 cd ff f4.24 e7 00 04.00 a9 10 2a.01 02 58 0a  |....$......*..X.|
  1121. 80020080  00 a2 48 0a.25 08 00 01.01 0c 10 2b.10 40 00 05  |..H.%......+.@..|
  1122. 80020090  71 18 10 02.00 00 30 21.00 00 28 21.08 00 6d 0d  |q.....0!..(!..m.|
  1123. 800200a0  00 59 38 21.11 20 00 45.24 06 ff ff.08 00 6d 39  |.Y8!. .E$.....m9|
  1124. 800200b0  24 03 00 0c.00 00 20 21.00 88 10 04.00 46 10 24  |$..... !.....F.$|
  1125. 800200c0  54 40 00 06.00 09 1f c2.24 84 00 01.14 87 ff fb  |T@......$.......|
  1126. 800200d0  00 88 10 04.08 00 6d 79.24 a5 00 01.00 69 18 21  |......my$....i.!|
  1127. 800200e0  00 05 11 40.00 44 10 21.00 03 18 43.08 00 6d 43  |...@.D.!...C..mC|
  1128. 800200f0  00 43 40 21.71 63 20 02.3c 02 80 01.24 42 7a e0  |.C@!qc .<...$Bz.|
  1129. 80020100  00 00 28 21.24 0a 00 03.24 08 00 01.24 07 00 20  |..(!$...$...$.. |
  1130. 80020110  00 82 18 21.54 aa ff e7.8c 66 00 00.3c 02 80 01  |...!T....f..<...|
  1131. 80020120  8c 47 70 5c.3c 05 bf b2                          |.Gp\<...        |
  1132. bldr> dump 180020000 129
  1133. 00000001 Undefined Exception happen.CP0_STATUS=1000ff03
  1134. CP0_CAUSE=40001808
  1135. CP0_EPC=83fb8a8c
  1136. CP0_BADVADDR=1
  1137.  
  1138.  lo=0 hi=0
  1139.  cp0_epc=0 cp0_badvaddr=0
  1140.  cp0_status=83fcf1a0 cp0_cause=d
  1141. pad0
  1142.  
  1143.  0x8c47705c 0x3c05bfb2 0x8c660000 0x3c028001
  1144.  0x1 0x10
  1145. regs
  1146.  
  1147.  2e 83fd3688 83fd37c0 83fd6244
  1148.  3 9 84017838 83fcf1a0
  1149.  83fd6244 83fd6244 83fcf1a0 83fb2394
  1150.  4 840178ac 83fd5c30 83fcfa14
  1151.  83fd6244 83fd6249 83fd6254 0
  1152.  0 0 0 0
  1153.  0 0 0 0
  1154.  0 0 0 0
  1155. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:24:22 =~=~=~=~=~=~=~=~=~=~=~=
  1156.  
  1157.  
  1158. DRAMC V2.0 (0)
  1159.  
  1160.  
  1161.  
  1162. DRAMC V2.3.0.2 (0)
  1163.  
  1164.  
  1165.  
  1166. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  1167.  
  1168. Memory size 128MB
  1169.  
  1170. NAND Page size:2048B,Total size 128MB
  1171.  
  1172. bmt pool size: 81
  1173.  
  1174. board ip address:192.168.1.254
  1175. reset DECT & SWITCH start.
  1176. ..
  1177. reset DECT & SWITCH over.
  1178.  
  1179. *** Press 1 means entering boot mode***
  1180. *** Press 2 means entering testing mode***
  1181. *** Press 3 means entering norm mode***
  1182. .
  1183. Entering test mode ...
  1184.  
  1185.  
  1186.  
  1187. Found image at 0x01680000
  1188.  
  1189. Found image at 0x01a80000
  1190. ****Try the second image...
  1191. rootfs 1:addr:87700000--size:900000
  1192. decompress_addr 1a80100 decompress_addr_end 1e80000
  1193. Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
  1194. 75xx: 0x80
  1195. Uncompressing [LZMA] ...  done.
  1196. Linux version 2.6.36 (xialei@localhost.localdomain) (gcc version 4.3.4 (GCC) ) #1 SMP Tue Jan 2 14:23:32 CST 2018
  1197. ISPRAM0: PA=00330000,Size=00008000,enabled
  1198. DSPRAM0: PA=1dff8000,Size=00001000,enabled
  1199. Check boot para cksum...
  1200. bde bdeboot para cksum OK!
  1201. Boot 2'th image
  1202. bootPara reserved_fs_size=900000
  1203. bootPara.runmode=2
  1204. pdt_verinfo_init: tcVerInfo->RunMode[2]
  1205. bootPara.bootWhichImg=2
  1206. bootPara.img_info_tbl[0].flashOffset=0x 1680000
  1207. hw_ver=00
  1208. sHardVersion=V1.0.00
  1209. memsize:128MB
  1210. Ralink MT751020 SOC prom init
  1211. bootconsole [early0] enabled
  1212. CPU revision is: 00019555 (MIPS 34Kc)
  1213. Determined physical RAM map:
  1214.  memory: 076e0000 @ 00020000 (usable)
  1215. Wasting 1024 bytes for tracking 32 unused pages
  1216. Zone PFN ranges:
  1217.   Normal   0x00000020 -> 0x00007700
  1218. Movable zone start PFN for each node
  1219. early_node_map[1] active PFN ranges
  1220.     0: 0x00000020 -> 0x00007700
  1221. 3 available secondary CPU TC(s)
  1222. PERCPU: Embedded 7 pages/cpu @810f3000 s7232 r8192 d13248 u65536
  1223. pcpu-alloc: s7232 r8192 d13248 u65536 alloc=16*4096
  1224. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  1225. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 30194
  1226. Kernel command line:  es=1
  1227. PID hash table entries: 512 (order: -1, 2048 bytes)
  1228. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  1229. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  1230. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  1231. Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  1232. Writing ErrCtl register=000216f4
  1233. Readback ErrCtl register=000216f4
  1234. nmi base is 8114c200
  1235. Memory: 114728k/121728k available (3288k kernel code, 7000k reserved, 791k data, 232k init, 0k highmem)
  1236. SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  1237. Hierarchical RCU implementation.
  1238.     RCU-based detection of stalled CPUs is disabled.
  1239.     Verbose stalled-CPUs detection is disabled.
  1240. NR_IRQS:64
  1241. CPU frequency 750.00 MHz
  1242.  Using 266.667 MHz high precision timer.
  1243. console [ttyS0] enabled, bootconsole disabled
  1244. console [ttyS0] enabled, bootconsole disabled
  1245. Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
  1246. pid_max: default: 32768 minimum: 301
  1247. Mount-cache hash table entries: 512
  1248. 34K sync es set to 1.
  1249. Config7: 0x80080500
  1250. Limit of 4 TCs set
  1251. TLB of 64 entry pairs shared by 2 VPEs
  1252. VPE 0: TC 0 1 2, VPE 1: TC 3
  1253. IPI buffer pool of 16 buffers
  1254. CPU revision is: 00019555 ((null))
  1255. TC 1 going on-line as CPU 1
  1256. CPU revision is: 00019555 ((null))
  1257. TC 2 going on-line as CPU 2
  1258. CPU revision is: 00019555 ((null))
  1259. TC 3 going on-line as CPU 3
  1260. Brought up 4 CPUs
  1261. NET: Registered protocol family 16
  1262. 11930:22:53 [KMONITOR][Notice] [monitor.c(938)MonitorInit]  cspmonitor init... !  
  1263. MT7510_pcie_init:1
  1264. check pcie link up status:
  1265. isRC0_LINKUP=1
  1266. isRC1_LINKUP=1
  1267. registering PCI controller with io_map_base unset
  1268. bio: create slab <bio-0> at 0
  1269. SCSI subsystem initialized
  1270. usbcore: registered new interface driver usbfs
  1271. usbcore: registered new interface driver hub
  1272. usbcore: registered new device driver usb
  1273. pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  1274. pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff]
  1275. pci 0000:00:01.0: BAR 9: assigned [mem 0x20200000-0x202fffff pref]
  1276. pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
  1277. pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff]
  1278. pci 0000:00:00.0: PCI bridge to [bus 01-01]
  1279. pci 0000:00:00.0:   bridge window [io  disabled]
  1280. pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
  1281. pci 0000:00:00.0:   bridge window [mem pref disabled]
  1282. pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit]
  1283. pci 0000:02:00.0: BAR 0: set to [mem 0x20100000-0x201fffff 64bit] (PCI address [0x20100000-0x201fffff]
  1284. pci 0000:02:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref]
  1285. pci 0000:00:01.0: PCI bridge to [bus 02-02]
  1286. pci 0000:00:01.0:   bridge window [io  disabled]
  1287. pci 0000:00:01.0:   bridge window [mem 0x20100000-0x201fffff]
  1288. pci 0000:00:01.0:   bridge window [mem 0x20200000-0x202fffff pref]
  1289. PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  1290. PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  1291. 11930:22:54 [KQOS][Info] [qos.c(4999)CSPKernel_QoS_I] Qos module init
  1292. Switching to clocksource MIPS
  1293. NET: Registered protocol family 2
  1294. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  1295. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  1296. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  1297. TCP: Hash tables configured (established 4096 bind 4096)
  1298. TCP: reno registered
  1299. UDP hash table entries: 128 (order: 0, 4096 bytes)
  1300. UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  1301. NET: Registered protocol family 1
  1302. TC3162 hardware watchdog module loaded.
  1303. spitest init OK!
  1304. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1305. msgmni has been set to 224
  1306. cryptomgr_test used greatest stack depth: 15632 bytes left
  1307. io scheduler noop registered (default)
  1308. ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
  1309. brd: module loaded
  1310. tc3162 mtd init: mt6573_nand_init enter
  1311. MediaTek MT6573 Nand driver init, version v2.0
  1312. tc3162: flash device 0x01000000 at 0x1c000000
  1313. tc3162 mtd init: nandflash_probe enter
  1314. Allocate 16 byte aligned buffer: 8044d4f0
  1315. Enable NFI Clock
  1316. # MT6573 NAND # : Use HW ECC
  1317. manu_id=c2, dev_id=f1
  1318. ext_id=809502,
  1319. Device found in MTK table, ID: c2f1
  1320. [NAND] pagesz:2048 eccsz: 32, oobsz: 128
  1321. Support this Device in MTK table! c2f1
  1322.  
  1323. NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
  1324. bmt pool size: 81
  1325. Init bmt table, size: 81
  1326. bmt count: 81, system count: 943
  1327. begin to search BMT from block 1023
  1328. Match bmt signature @ block: 1023
  1329. Valid BMT, version v1
  1330. bmt found at block: 1023, mapped block: 0
  1331. Load bmt data success @ block 1023
  1332. BMT v1.total 0 mapping
  1333. Match bbt signature
  1334. BBT Checksum is: 0xd7
  1335. Valid BBT, version v1
  1336. bbt found, bad block count: 1
  1337. init_bbt->badblock_table[0]: 468
  1338. Load bbt data success
  1339. [mt6573_nand] probe successfully!
  1340. Creating 8 MTD partitions on "MT6573-Nand":
  1341. 0x000000000000-0x000008000000 : "Whole flash"
  1342. mtd: partition "Whole flash" extends beyond the end of device "MT6573-Nand" -- size truncated to 0x75c0000
  1343. 0x000000000000-0x000000040000 : "Bootloader"
  1344. 0x000000040000-0x000000080000 : "tag"
  1345. 0x000000080000-0x000000280000 : "config"
  1346. 0x000000280000-0x000001680000 : "rootfs1"
  1347. 0x000001680000-0x000001a80000 : "kernel1"
  1348. 0x000001a80000-0x000001e80000 : "kernel2"
  1349. 0x000001e80000-0x000003280000 : "rootfs2"
  1350. physmap mtd driver register!!!
  1351. pkq map rom ram_flash:offset:87700000---size:900000
  1352. !!!! led bink!!!
  1353. RT3xxx EHCI/OHCI init.
  1354. nf_conntrack version 0.5.0 (1792 buckets, 7168 max)
  1355. ip_tables: (C) 2000-2006 Netfilter Core Team
  1356. NET: Registered protocol family 10
  1357. ip6_tables: (C) 2000-2006 Netfilter Core Team
  1358. NET: Registered protocol family 17
  1359. Bridge firewalling registered
  1360. Ebtables v2.0 registered
  1361. PPP generic driver version 2.4.2
  1362. NET: Registered protocol family 24
  1363. 11930:22:55 [KSWETH][Notice] [sweth_core.c(2818)sweth_init] SW&ETH HAL driver initing!
  1364. 11930:22:55 [KSWETH][Notice] [sweth_core.c(144)CreateSwEthObjs] Create SW & ETH objects
  1365. 11930:22:55 [KSWETH][Notice] [sweth_core.c(160)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
  1366. 11930:22:55 [KSWETH][Info] [sweth_core.c(167)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=5.
  1367. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  1368. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj0: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 0
  1369. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  1370. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj1: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 1
  1371. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  1372. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj2: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 2
  1373. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  1374. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj3: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 3
  1375. 11930:22:55 [KSWETH][Warn] [sweth_core.c(314)CreateSwEthObjs] Failed to get TAG_PARA_MAC1!
  1376. 11930:22:55 [KSWETH][Info] [sweth_core.c(326)CreateSwEthObjs] ETH obj4: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 4
  1377. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  1378. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  1379. 11930:22:55 [LEDKEYDRV][Info] [ledkey_mod.c(1163)KeyModuleInit] Warning!The supplied protect time is less than 1000ms,so use the default protect time 1000ms
  1380. 11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1348)TagaramodInit] Tagaram module Driver Version 0.0.1.
  1381. 11930:22:55 [TAGPARAM][Info] [tagparam_mod.c(1381)TagaramodInit] parse tag param success
  1382. Jiffies_test Driver Init Successfully
  1383. logger: created 1024K log 'logger_main' major '99'
  1384. : success register character device for /dev/monitor
  1385. 11930:22:55 [MIRROR][Notice] [cspmirror.c(1262)mirror_init] ***********mirror_init************
  1386. systools version:v0.7.0
  1387. errorEPC = b7000580
  1388. 11930:22:55 [KIGMPSNP][Info] [br_multicast_se(7334)br_mcparam_init] info init!
  1389. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(stb)
  1390. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(srtc)
  1391. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(trtc)
  1392. 11930:22:55 [KQOS][Info] [qp_meter_api.c(66)QoSPolicerMeter] Register Meter(hard)
  1393. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(null)
  1394. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(drop)
  1395. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(dscp_mark)
  1396. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(vlan_prio_mark)
  1397. 11930:22:55 [KQOS][Info] [qp_act_api.c(66)QoSPolicerActRe] Register Action(dscp_vlan_prio_mark)
  1398. child_dev_init start
  1399. child_dev_ioctl_set set[8031b69c]
  1400. 11930:22:55 [Kernm255][Info] [ver_info.c(406)ver_info_init] ver_info_init
  1401. 11930:22:55 [Kernm255][Info] [ver_info.c(195)ReadInfoFromVer] ver_info_init
  1402. 11930:22:55 [Kernm255][Info] [ver_info.c(202)ReadInfoFromVer] ver_info_init
  1403. 11930:22:55 [Kernm255][Info] [ver_info.c(218)ReadInfoFromVer] wFirmwareForm is:0x1
  1404. 11930:22:55 [KSWETH][Notice] [csp_ifinfo.c(221)csp_ifinfo_init] Initializing CSP IFinfo...
  1405. khelper used greatest stack depth: 15232 bytes left
  1406. khelper used greatest stack depth: 15104 bytes left
  1407. kworker/u:1 used greatest stack depth: 14864 bytes left
  1408. kworker/u:1 used greatest stack depth: 14792 bytes left
  1409. register AF_INET filter failed
  1410. #######begin FDB_Notify Reg
  1411. #######after FDB_Notify Reg
  1412. #######begin FDB_Notify Reg
  1413. Shouldn't be in WHILE
  1414. #######after FDB_Notify Reg
  1415. 11930:22:55 [LEDKEYDRV][Error] [ledkey_callback(26)keycallback_ini] Install WPS KEY Callback Failed!
  1416. VFS: Mounted root (squashfs filesystem) readonly on device 31:8.
  1417. Freeing unused kernel memory: 232k freed
  1418. busybox init and set aff
  1419. sched_setaffinity cpu all success
  1420. Algorithmics/MIPS FPU Emulator v1.5
  1421. mount used greatest stack depth: 14776 bytes left
  1422. mount used greatest stack depth: 14328 bytes left
  1423. init debug mode!!!
  1424. /etc/init.debug: line 74: can't create /proc/rtl_reg: nonexistent directory
  1425. /etc/init.debug: line 75: usleep: not found
  1426. /etc/init.debug: line 76: can't create /proc/rtl_reg: nonexistent directory
  1427. /etc/init.debug: line 77: usleep: not found
  1428. /etc/init.debug: line 78: can't create /proc/rtl_reg: nonexistent directory
  1429. /etc/init.debug: line 79: usleep: not found
  1430. /etc/init.debug: line 80: can't create /proc/rtl_reg: nonexistent directory
  1431. /etc/init.debug: line 81: usleep: not found
  1432. /etc/init.debug: line 95: usleep: not found
  1433. /etc/init.debug: line 97: usleep: not found
  1434. interface eth0 does not exist!
  1435. interface eth1 does not exist!
  1436. interface eth2 does not exist!
  1437. interface eth3 does not exist!
  1438. interface eth4 does not exist!
  1439. /etc/init.debug: line 104: usleep: not found
  1440. device br0 entered promiscuous mode
  1441. ########br's FDB_MAX[256]
  1442. bridge name bridge id       STP enabled interfaces
  1443. br0     8000.00d0d0112132   no     
  1444. /etc/init.debug: line 116: /etc/Wsh used greatest stack depth: 14264 bytes left
  1445. ireless/CL1800/host_insmod.sh: not found
  1446. /etc/init.debug: line 117: usleep: not found
  1447. /etc/init.debug: line 118: /etc/Wireless/CL1800/ce_prod.sh: not found
  1448. procfile used greatest stack depth: 14128 bytes left
  1449.  
  1450.  
  1451. H168NV31
  1452.  
  1453. login: h168nv31        user
  1454. Password:
  1455. Login incorrect
  1456. H168NV31
  1457.  
  1458. login: 3play
  1459. Password:
  1460. Login incorrect
  1461. H168NV31
  1462.  
  1463. login: admin
  1464. Password:
  1465. Login inco
  1466.  
  1467. H168NV31
  1468.  
  1469. login: d admin
  1470. Password:
  1471. Login incorrect
  1472. H168NV31
  1473.  
  1474. login: admin
  1475. Password:
  1476. Login incorrect
  1477. H168NV31
  1478.  
  1479. login:
  1480. H168NV31
  1481.  
  1482. login:  
  1483. H168NV31
  1484.  
  1485. login:  
  1486. H168NV31
  1487.  
  1488. login: cytauser
  1489. Password:
  1490. Login inco
  1491.  
  1492. H168NV31
  1493.  
  1494. login: hpn
  1495. Password:
  1496. Login incorrect
  1497. H168NV31
  1498.  
  1499. login: HPN
  1500. Password:
  1501. Login incorrect
  1502. H168NV31
  1503.  
  1504. login: KPN
  1505. Password:
  1506. Login inco
  1507.  
  1508. H168NV31
  1509.  
  1510. login: mtn
  1511. Password:
  1512. Login incorrect
  1513. H168NV31
  1514.  
  1515. login: mtn
  1516. Password:
  1517. Login incorrect
  1518. H168NV31
  1519.  
  1520. login: none
  1521. Password:
  1522. Login inco
  1523.  
  1524. H168NV31
  1525.  
  1526. login: admin
  1527. Password:
  1528. Login incorrect
  1529. H168NV31
  1530.  
  1531. login: zte
  1532. Password:
  1533. Login incorrect
  1534. H168NV31
  1535.  
  1536. login: none
  1537. Password:
  1538. Login inco
  1539.  
  1540. H168NV31
  1541.  
  1542. login: none
  1543. Password:
  1544. Login incorrect
  1545. H168NV31
  1546.  
  1547. login: user
  1548. Password:
  1549. Login incorrect
  1550. H168NV31
  1551.  
  1552. login: 
  1553.  
  1554. Log
  1555.  
  1556. H168NV31
  1557.  
  1558. login: root
  1559. Password:
  1560. Login incorrect
  1561. H168NV31
  1562.  
  1563. login: root
  1564. Password:
  1565. Login incorrect
  1566. H168NV31
  1567.  
  1568. login: admin
  1569. Password:
  1570. Login inco
  1571.  
  1572. H168NV31
  1573.  
  1574. login: superadmin
  1575. Password:
  1576. Login incorrect
  1577. H168NV31
  1578.  
  1579. login: superadmin
  1580. Password:
  1581. Login incorrect
  1582. H168NV31
  1583.  
  1584. login: superadmin
  1585. Password:
  1586.  
  1587. Log
  1588.  
  1589. H168NV31
  1590.  
  1591. login: superadmin
  1592. Password:
  1593. Login incorrect
  1594. H168NV31
  1595.  
  1596. login: superadmin
  1597. Password:
  1598. Login incorrect
  1599. H168NV31
  1600.  
  1601. login: superadmin
  1602. Password:
  1603. Login inco
  1604.  
  1605. H168NV31
  1606.  
  1607. login: r
  1608. Password:
  1609. Login incorrect
  1610. H168NV31
  1611.  
  1612. login: H168NV31
  1613. Password:
  1614. Login incorrect
  1615. H168NV31
  1616.  
  1617. login: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.08.18 03:36:13 =~=~=~=~=~=~=~=~=~=~=~=
  1618.  
  1619.  
  1620. DRAMC V2.0 (0)
  1621.  
  1622.  
  1623.  
  1624. DRAMC V2.3.0.2 (0)
  1625.  
  1626.  
  1627.  
  1628. MT751020 at Tue Jul 4 16:33:16 CST 2017 version 1.1 free bootbase
  1629.  
  1630. Memory size 128MB
  1631.  
  1632. NAND Page size:2048B,Total size 128MB
  1633.  
  1634. bmt pool size: 81
  1635.  
  1636. board ip address:192.168.1.254
  1637. reset DECT & SWITCH start.
  1638. ..
  1639. reset DECT & SWITCH over.
  1640.  
  1641. *** Press 1 means entering boot mode***
  1642. *** Press 2 means entering testing mode***
  1643. *** Press 3 means entering norm mode***
  1644.  
  1645. Entering boot mode ...
  1646.  
  1647. ******start httpd******
  1648.  
  1649. PBUF_POOL_BUFSIZE = 256
  1650.  
  1651. tcp_bind()
  1652.  
  1653. Local Port = 0
  1654.  
  1655. tcp_bind: bind to port 80
  1656.  
  1657. Search PHY addr and found PHY addr=0
  1658. Not found TC Phy
  1659.  
  1660. PBUF_POOL_BUFSIZE = 256
  1661.  
  1662. memtop = 80020000
  1663. zteboot_cmdline_init
  1664. bldr> telnetd
  1665. bldr> ftpd
  1666. bldr> ?
  1667.                                                                              
  1668. ?                                   Print out help messages.                  
  1669. help                                Print out help messages.                  
  1670. go                                  Booting the linux kernel.                
  1671. decomp                              Decompress kernel image to ram.          
  1672. memrl <addr>                        Read a word from addr.                    
  1673. memwl <addr> <value>                Write a word to addr.                    
  1674. dump <addr> <len>                   Dump memory content.                      
  1675. jump <addr>                         Jump to addr.                            
  1676. flash <dst> <src> <len>             Write to flash from src to dst.          
  1677. erase <dst> <len>                   Erase flash.                              
  1678. program <dst> <src> <len>           Program flash.                            
  1679. xmdm <addr> <len>                   Xmodem receive to addr.                  
  1680. miir <phyaddr> <reg>                Read ethernet phy reg.                    
  1681. miiw <phyaddr> <reg> <value>        Write ethernet phy reg.                  
  1682. gswr <reg>                          Read gsw reg.                            
  1683. gsww <reg> <value>                  Write gsw reg.                            
  1684. cpufreq <freq num> / <m> <n>        Set CPU Freq <156~450>(freq has to be multiple of 6)
  1685. ipaddr <ip addr>                    Change modem's IP.                        
  1686. httpd                               Start Web Server                          
  1687. ddrdrv <..>                         Change DDR driving length                
  1688. reset                               reset the system                          
  1689. upgrade <ip addr> <filename>        upgrade version                          
  1690. runemt                              run emt mode                              
  1691. bldr>
  1692. bldr>
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top